white drive products RS SERIES HYDRULIC MOTORS
RS overview RS Series motors are the most economical model in the White Drive Products product line, but are not low-tech. Unlike competitive products using power robbing, two-piece rotor set designs with sliding contact points, RS Series motors utilize the patented Roller Stator design. Seven precision rollers for the contact points reduce friction, providing more power and longer life for your application. Each output shaft is custom ground to maintain exact tolerances between the housing and shaft, producing high volumetric efficiencies. Industry standard mounting flanges and output shafts allow the RS Series motors to interchange with competitive designs. whitedriveproducts key features Match Ground Shaft is matched to housing bore to maintain highest volumetric efficiencies. High Pressure Shaft Seal offers superior seal life and performance and eliminates the need for case drain. Pressure Fed earing surface receives positive flow of clean, cool oil. Heavy-Duty Drive Link receives full flow lubrication to provide long life. Roller Stator Motor Design increases efficiency and life by using roller contact versus solid, sliding contact design. Specifications Peak Ratings - 1% of Operation Speed Flow Torque Pressure CODE Displacement rpm lpm [gpm] Nm [lb-in] bar [psi] cc [in 3 /rev] cont. inter. cont. inter. cont. inter. cont. inter. peak 050 52 [3.2] 400 490 82 [730] 95 [840] 1 [1750] 138 [2000] 155 [2250] 080 76 [4.6] 460 540 1 [70] 138 [30] 1 [1750] 138 [2000] 155 [2250] 090 89 [5.4] 420 580 147 [1300] 167 [1480] 1 [1750] 138 [2000] 155 [2250] 0 3 [ 6.3] 5 570 53 [14] 61 [16] 169 [1500] 195 [1725] 1 [1750] 138 [2000] 155 [2250] 1 111 [6.8] 460 600 53 [14] 68 [18] 184 [1630] 214 [1900] 1 [1750] 138 [2000] 155 [2250] 5 7 [7.7] 4 530 53 [14] 68 [18] 181 [1600] 208 [1850] 3 [1500] 1 [1750] 155 [2250] 160 164 [.0] 370 460 61 [16] 76 [20] 222 [1970] 265 [2350] 3 [1500] 1 [1750] 155 [2250] 200 205 [.5] 300 370 61 [16] 76 [20] 297 [2640] 345 [3050] 3 [1500] 1 [1750] 155 [2250] 250 254 [15.5] 300 360 76 [20] 91 [24] 287 [2540] 344 [3040] 86 [50] 4 [1500] 1 [1750] 300 293 [17.9] 300 3 76 [20] 91 [24] 277 [2460] 350 [30] 69 [00] 86 [50] 3 [1500] 400 409 [24.9] 190 220 76 [20] 91 [24] 377 [3350] 463 [40] 69 [00] 86 [50] 3 [1500] 2
whitedriveproducts RS Performance 050 17 [250] 35 [500] 52 [750] 69 [00] 86 [50] 4 [1500] 1 [1750] 138 [2000] 52 cc [3.2 in 3 /rev.] [89] 15 [133] 25 [223] 35 [92] 33 18 [163] 26 29 [253] 69 [90] 68 20 [181] 68 31 [274] 142 [85] 140 17 [154] 138 28 [251] 288 285 19 [168] 283 27 [243] 433 17 [148] 432 27 [243] 576 13 [119] 574 25 [218] 718 711 33 [290] 24 39 [348] 67 41 [366] 136 40 [355] 282 39 [342] 430 36 [318] 570 35 [307] 701 42 [375] 24 49 [438] 54 52 [464] 7 53 [465] 275 50 [445] 429 47 [417] 568 48 [429] 700 49 [435] 59 [523] 49 63 [556] 3 65 [572] 258 62 [549] 408 59 [526] 554 56 [499] 689 37 55 [483] 73 4 74 [653] 78 [690] 145 78 34 76 [669] 86 [764] 289 227 193 74 [656] 85 [755] 434 380 346 71 [631] 578 535 67 [593] 722 682 14 [7] 29 [255] 43 [382] 58 [5] 72 [637] 86 [764] 1 [892] 115 [19] 080 17 [250] 35 [500] 52 [750] 69 [00] 86 [50] 4 [1500] 1 [1750] 138 [2000] 76 cc [4.6 in 3 /rev.] [7] 26 [227] 39 [341] 25 [1] 21 29 [252] 20 43 [381] 50 14 [2] 50 29 [260] 42 46 [405] 0 99 30 [263] 99 47 [416] 200 28 [252] 196 46 [403] 301 25 [221] 297 43 [379] 400 399 39 [341] 502 35 [314] 602 51 [456] 9 59 [522] 35 63 [560] 93 65 [574] 193 64 [562] 293 63 [555] 393 57 [502] 500 50 [446] 600 58 [509] 5 75 [661] 34 80 [707] 82 82 [726] 184 82 [721] 287 79 [703] 390 74 [657] 498 71 [625] 599 81 [720] 11 96 [848] 73 98 [871] 168 98 [869] 271 97 [860] 375 93 [819] 496 92 [816] 598 26 51 1 [973] 115 [16] 1 48 20 118 [46] 134 [1184] 201 150 1 115 [20] 134 [1183] 302 252 218 115 [14] 132 [1172] 402 355 330 111 [980] 8 [1135] 503 472 443 5 [932] 603 580 21 [183] 41 [366] 62 [549] 83 [732] 3 [916] 4 [99] 145 [82] 166 [1465] 090 17 [250] 35 [500] 52 [750] 69 [00] 86 [50] 4 [1500] 1 [1750] 138 [2000] 89 cc [5.4 in 3 /rev.] 23 [206] 43 [376] 63 [559] 84 [743] 98 [864] 5 [933] 20 19 43 [383] 17 64 [566] 14 86 [760] 8 [953] 1 7 [13] 41 44 [388] 40 63 [561] 37 83 [739] 32 6 [937] 25 7 [11] 85 84 61 [538] 81 85 [754] 75 4 [920] 66 8 [1134] 169 166 81 [720] 159 2 [902] 149 5 [15] 251 78 [686] 244 98 [867] 229 2 [80] 338 330 93 [824] 318 113 [04] 417 81 [715] 406 87 [766] 504 491 138 [25] 151 [1336] 51 148 [1309] 133 144 [75] 213 141 [51] 300 137 [] 386 113 [998] 478 169 [1495] 31 168 [1484] 115 164 [1450] 191 164 [1448] 278 161 [1422] 365 22 43 86 172 257 343 428 514 24 [215] 49 [430] 73 [645] 97 [860] 1 [75] 146 [90] 170 [1505] 194 [1720] 3
RS Performance whitedriveproducts 0 17 [250] 35 [500] 52 [750] 69 [00] 86 [50] 4 [1500] 1 [1750] 138 [2000] 3 cc [6.3 in 3 /rev.] 53 [14] 61 [16] 25 [221] 52 [461] 76 [676] 98 [870] 115 [20] 17 26 [233] 16 51 [449] 15 77 [680] 3 [914] 7 6 [1116] 146 [95] 36 36 49 [433] 34 77 [682] 32 1 [893] 28 5 [18] 23 150 [1331] 72 71 73 [648] 69 99 [873] 65 3 [88] 59 146 [91] 143 69 [606] 135 94 [830] 4 0 [62] 118 145 [79] 219 213 89 [789] 203 113 [999] 190 142 [54] 288 78 [693] 278 2 [905] 264 7 [14] 363 353 85 [755] 341 119 [49] 433 84 [746] 421 118 [40] 507 497 8 [957] 574 166 [1473] 151 [1336] 13 1 174 [1538] 199 [1758] 50 37 170 [1504] 195 [1721] 94 75 165 [1463] 194 [1717] 177 154 161 [1429] 187 [1658] 249 230 156 [1380] 182 [16] 322 301 147 [99] 172 [1526] 405 384 135 [1198] 141 [50] 484 465 135 [1197] 566 19 37 74 147 220 294 367 440 514 587 28 [251] 57 [502] 85 [752] 113 [03] 142 [54] 170 [1505] 198 [1756] 227 [2006] 1 17 [250] 35 [500] 52 [750] 69 [00] 86 [50] 4 [1500] 1 [1750] 138 [2000] 111 cc [6.8 in 3 /rev.] 53 [14] 61 [16] 68 [18] 26 [227] 54 [481] 78 [689] 0 [888] 9 [961] 16 29 [253] 14 55 [489] 11 83 [733] 7 1 [974] 1 134 [1183] 153 [1356] 33 32 57 [503] 30 82 [727] 26 1 [969] 20 135 [1199] 162 [1431] 67 54 [479] 64 80 [706] 60 7 [951] 52 134 [1190] 40 162 [1437] 135 133 76 [669] 8 6 [934] 0 9 [1144] 4 153 [1357] 201 70 [621] 193 97 [862] 183 3 [92] 165 151 [1336] 271 267 88 [779] 256 116 [25] 242 146 [94] 335 86 [764] 324 9 [963] 307 139 [26] 405 396 2 [901] 376 9 [1142] 463 95 [844] 449 1 [75] 535 523 111 [984] 595 184 [1631] 180 [1590] 20 1 186 [1643] 216 [1911] 88 58 185 [1636] 206 [1826] 141 114 177 [1569] 202 [1788] 220 196 170 [1505] 201 [1783] 289 254 168 [1482] 190 [1683] 351 330 156 [1378] 184 [1626] 427 406 147 [97] 505 136 [05] 579 17 34 68 136 204 272 340 408 476 544 6 31 [271] 61 [541] 92 [8] 2 [83] 153 [1354] 184 [1624] 214 [1895] 245 [2166] 4
whitedriveproducts RS Performance 7 cc [7.7 in 3 /rev.] 5 53 [14] 61 [16] 68 [18] 17 [250] 35 [500] 52 [750] 69 [00] 86 [50] 4 [1500] 1 [1750] 29 [225] 60 [534] 86 [758] 1 [990] 9 [1145] 14 7 2 15 28 [251] 61 [537] 61 [538] 87 [771] 82 [722] 5 [927] 97 [859] 89 [787] 99 [879] 0 [885] 62 [545] 92 [816] 90 [797] 117 [32] 1 [987] 137 [14] 0 [66] 119 [51] 131 [1163] 119 [53] 93 [819] 5 [13] 3 [84] 149 [1321] 142 [57] 167 [1474] 157 [1386] 146 [95] 1 [73] 153 [1356] 151 [1338] 177 [1566] 175 [1548] 194 [1720] 183 [1622] 174 [1536] 149 [1319] 182 [1609] 181 [1602] 208 [1838] 201 [1781] 173 [1531] 2 [1856] 2 [1860] 176 [1559] 29 58 118 177 234 290 349 409 471 528 28 57 115 168 229 277 339 385 459 5 26 54 8 158 215 263 322 376 23 49 99 145 203 244 306 367 18 41 84 3 186 29 65 1 30 60 0 180 240 300 360 420 480 540 35 [307] 69 [613] 4 [920] 139 [26] 173 [1533] 208 [1839] 242 [2146] 164 cc [.0 in 3 /rev.] 160 53 [14] 61 [16] 68 [18] 76 [20] 17 [250] 35 [500] 52 [750] 69 [00] 86 [50] 4 [1500] 1 [1750] 32 [281] 71 [630] 3 [908] 141 [47] 167 [1481] 11 8 6 2 35 [308] 36 [320] 72 [633] 69 [608] 65 [573] 95 [837] 83 [736] 73 [643] 2 [901] 93 [824] 111 [980] 76 [677] 78 [694] 114 [07] 9 [961] 4 [921] 134 [1184] 4 [95] 114 [] 142 [55] 7 [11] 152 [1348] 111 [983] 116 [23] 155 [1375] 149 [1318] 139 [33] 173 [1531] 162 [1432] 154 [1366] 179 [1585] 164 [1447] 141 [45] 159 [1403] 190 [1679] 188 [1667] 181 [1597] 2 [1874] 203 [1796] 194 [1714] 219 [1936] 182 [1615] 193 [1707] 226 [1998] 224 [1979] 219 [1941] 251 [2220] 241 [2133] 231 [2045] 211 [1867] 223 [1974] 262 [2319] 267 [2359] 258 [2284] 234 [2070] 257 [2279] 22 45 91 138 184 230 276 322 369 415 460 21 45 90 137 183 229 275 321 368 414 460 20 44 86 132 180 221 270 320 362 4 20 42 80 5 171 211 259 3 345 16 39 71 114 161 197 245 295 11 34 56 1 148 3 27 24 47 93 139 185 231 278 324 370 416 462 45 [398] 90 [796] 135 [1194] 180 [1592] 225 [1990] 270 [2389] 315 [2787] 5
RS Performance whitedriveproducts 205 cc [.5 in 3 /rev.] 200 53 [14] 61 [16] 68 [18] 76 [20] 17 [250] 35 [500] 52 [750] 69 [00] 86 [50] 4 [1500] 1 [1750] 47 [414] 96 [846] 141 [50] 183 [1621] 224 [1983] 8 7 6 5 3 49 [432] 47 [416] 43 [380] 90 [795] 83 [734] 75 [666] 116 [26] 97 [862] 85 [752] 2 [79] 4 [924] 98 [865] 5 [927] 96 [849] 149 [1322] 139 [28] 8 [1134] 167 [1475] 153 [1358] 137 [] 174 [1541] 154 [1366] 154 [1360] 157 [1386] 152 [1349] 194 [1721] 192 [1697] 175 [1546] 217 [1924] 205 [1811] 191 [1687] 224 [1981] 207 [1833] 196 [1732] 204 [1809] 203 [1798] 249 [2207] 238 [22] 227 [2013] 262 [2322] 251 [2218] 240 [27] 241 [2136] 245 [2166] 249 [2204] 298 [2634] 296 [2621] 280 [2482] 316 [2795] 300 [2656] 292 [2583] 284 [2517] 299 [2642] 298 [2641] 340 [3007] 339 [2997] 329 [29] 318 [2811] 341 [3019] 350 [3094] 17 36 73 1 147 184 221 258 295 332 369 17 36 73 1 146 183 220 257 295 331 368 15 34 72 6 144 183 218 256 294 330 367 14 31 68 3 142 181 214 252 291 11 29 65 96 133 172 205 249 284 9 23 60 90 6 166 5 17 52 19 37 74 111 148 185 222 259 296 333 370 56 [498] 1 [995] 169 [1493] 225 [1990] 281 [2488] 337 [2986] 394 [3483] 254 cc [15.5 in 3 /rev.] 250 53 [14] 61 [16] 68 [18] 76 [20] 83 [22] 91 [24] 17 [250] 35 [500] 52 [750] 69 [00] 86 [50] 4 [1500] 52 [457] 4 [919] 150 [1327] 6 52 [458] 4 1 [988] 2 168 [1491] 14 55 [490] 115 [18] 171 [15] 29 49 [437] 27 116 [28] 24 171 [1517] 59 45 [398] 58 5 [930] 56 163 [1440] 88 88 90 [795] 87 147 [1305] 118 76 [676] 117 142 [53] 148 25 [225] 147 4 [98] 178 177 89 [784] 208 82 [722] 237 222 [1966] 267 [2361] 300 [2658] 7 231 [2041] 4 288 [2547] 1 323 [2856] 20 233 [2064] 14 288 [2551] 9 344 [3040] 51 222 [1966] 44 284 [25] 34 345 [3051] 82 186 [1649] 76 268 [2372] 62 330 [2918] 115 196 [1738] 6 256 [2263] 96 311 [2754] 146 186 [1642] 140 234 [2071] 133 282 [2499] 176 157 [1386] 173 222 [1962] 163 278 [2460] 206 142 [56] 204 202 [1786] 194 261 [2306] 236 4 [96] 234 183 [1618] 228 240 [26] 266 95 [842] 264 157 [1387] 259 217 [1919] 297 295 130 [1147] 293 327 99 [874] 356 8 15 30 60 90 0 150 179 209 239 269 299 328 358 70 [617] 139 [34] 209 [1851] 279 [2468] 349 [3085] 418 [3702] 6
whitedriveproducts RS Performance 300 17 [250] 35 [500] 52 [750] 69 [00] 86 [50] 293 cc [17.9 in 3 /rev.] 53 [14] 61 [16] 68 [18] 76 [20] 83 [22] 91 [24] 58 [516] 6 [1111] 185 [1638] 5 64 [563] 5 4 [96] 5 189 [1673] 64 [564] 133 [1180] 11 199 [1758] 25 59 [524] 25 135 [1193] 24 200 [1773] 51 53 [468] 51 6 [1116] 50 195 [1728] 76 76 8 [954] 75 186 [1650] 2 0 [887] 1 170 [1503] 8 79 [698] 8 156 [1381] 154 63 [558] 154 136 [06] 180 180 113 [00] 205 263 [2325] 329 [29] 9 268 [2375] 343 [3033] 23 21 269 [2384] 355 [3145] 50 47 278 [2463] 350 [3096] 75 74 251 [2218] 339 [3000] 1 0 241 [2132] 319 [2824] 7 6 220 [1944] 301 [2660] 153 152 201 [1780] 284 [25] 179 179 184 [1630] 250 [2213] 204 203 156 [1382] 216 [1915] 231 230 119 [54] 190 [1679] 257 256 83 [738] 283 7 13 26 52 78 4 130 155 181 207 233 259 284 3 81 [713] 161 [1425] 242 [2138] 322 [2850] 403 [3563] 409 cc [24.9 in 3 /rev.] 400 53 [14] 61 [16] 68 [18] 76 [20] 83 [22] 91 [24] 17 [250] 35 [500] 52 [750] 69 [00] 86 [50] 87 [767] 187 [1656] 3 2 90 [793] 180 [1597] 8 8 88 [777] 175 [1550] 18 17 85 [753] 177 [1565] 37 36 71 [631] 169 [1498] 55 55 58 [516] 158 [1396] 73 71 141 [47] 92 118 [42] 1 89 [792] 9 59 [520] 147 274 [2425] 369 [3270] 446 [3951] 6 286 [2528] 6 374 [3309] 3 466 [44] 16 287 [2540] 15 382 [3384] 469 [4153] 35 280 [2477] 33 370 [3273] 29 466 [42] 54 257 [2274] 52 352 [3119] 49 441 [3901] 70 238 [23] 69 328 [2906] 68 434 [3837] 91 225 [1989] 90 303 [2682] 87 408 [3613] 9 189 [1670] 8 278 [2463] 7 367 [3251] 8 154 [1359] 6 249 [2204] 4 334 [2954] 146 116 [27] 144 219 [1934] 143 320 [2746] 166 89 [790] 165 188 [1663] 164 264 [2336] 185 184 140 [42] 183 204 93 [824] 222 5 19 38 56 75 93 1 130 149 167 186 205 223 1 [991] 224 [1982] 336 [2974] 448 [3965] 560 [4956] 7
RS whitedriveproducts NOTE: Dimensions shown are without paint. Paint thickness can be up to 0,13 [.005] 200 & 201 Series housings (SE Mounts) 2-Hole 1/2 NPT ligned Ports 11 2-Hole 7/8 O-Ring ligned Ports 18 2-Hole 1/2 SP.F ligned Ports 68 2-Hole 1/2 SP.F ligned Ports* 40 [1.89 ] 52 [2.03] 41 [1.63] 40 [1.89 ] *2,7 [.6] *2,8 [.1] 132 [5.19] Ø82,5 [3.249] Ø82,3 [3.242] 46 [1.80] 23 [.90] Ø6,3 [4.187] 13,3 [.522] 13,1 [.514] NOTE: Dimension is found on page. * Pilot height is 5,2 [.205] - 5,3 [.2] for the 62, 67, & 68. ** For the 67 the four mounting holes are M8 x 1.25 at same depth. 2-Hole 1/2 SP.F Offset Ports 62 2-Hole 1/2 SP.F Offset Ports* 3 [.] 2 [.06] 40 [1.89 ] 52 [2.03] 40 [1.89 ] *2,7 [.6] *2,8 [.1] 35 [1.36] 16 [.63] 132 [5.19] Ø82,5 [3.249] Ø82,3 [3.242] 20 [.79] Ø6,3 [4.187] 13,3 [.522] 13,1 [.514] 3 [.] 2 [.06] 71 [2.78] 17 2-Hole 1/2 Manifold Ports 67 2-Hole 1/2 Manifold Ports* 40 [1.89 ] 40 [1.89 ] 47 [1.85] *2,7 [.6] *2,8 [.1] 39 [1.54] 14 [.56] 14 [.56] 132 [5.19] 32 [1.25] 23 [.90] Ø82,5 [3.249] Ø82,3 [3.242] 32 [1.25] 23 [.90] Ø6,3 [4.187] 13,3 [.522] 13,1 [.514] 3 [.] 2 [.06] (2) Ø 1/2-19 [.073] Deep **(4) 5/16-18 UNC (13 [.5] Deep Min.) 8
whitedriveproducts RS 200 & 201 Series housings (SE Mounts) NOTE: Dimensions shown are without paint. Paint thickness can be up to 0,13 [.005] 13 2-Hole 1/2 SP.F Manifold Ports 63 2-Hole 1/2 SP.F Manifold Ports* 40 [1.89 ] 40 [1.89 ] 47 [1.85] 35 [1.36] *2,7 [.6] *2,8 [.1] 36 [1.42] 20 [.79] 20 [.79] 16 [.63] 132 [5.19] Ø82,5 [3.249] Ø82,3 [3.242] 20 [.79] Ø6,3 [4.187] 13,3 [.522] 13,1 [.514] NOTE: Dimension is found on page. * Pilot height is 5,2 [.205] - 5,3 [.2] for the 63. 20 [.79] 20 [.79] (4) M8 x 1.25 (8 [.30] Deep Min.) 70 2-Hole 1/2 NPT Side Ports 71 2-Hole 7/8 O-Ring Side Ports 72 2-Hole 1/2 SP.F Side Ports 57 [2.23] 132 [5.19] 41 [1.63] Ø6,3 [4.187] 52 [2.03] 2,7 [.6] 2,8 [.1] 40 [1.89 ] 31 [1.22] Ø82,5 [3.249] Ø82,3 [3.242] 25 [.98] 13,3 [.522] 13,1 [.514] 40 [1.89 ] 19 2-Hole 7/8 O-Ring Offset Ports With Valve Cavity 40 [1.56] 33 [1.28] 13,3 [.522] 13,1 [.514] 2,7 [.6] 2,8 [.1] 91 [3.58] 37 [1.44] 16 [.63] 132 [5.19] Ø82,5 [3.249] Ø82,3 [3.242] 20 [.79] Ø6,3 [4.187] 35 [1.36] 40 [1.89 ] 52 [2.03] 71 [2.78] 9
RS whitedriveproducts NOTE: Dimensions shown are without paint. Paint thickness can be up to 0,13 [.005] 200 & 201 Series housings (4-hole square mounts) F30 4-Hole 1/2 NPT ligned Ports F31 4-Hole 7/8 O-Ring ligned Ports 45 [1.76] 49 [1.94] 39 [1.53] 39 [1.53] 3 [.] 2 [.06] 43 [1.69] 48 [1.90] 39 [1.53] 23 [.90] 39 [1.53] 23 [.90] Ø 83 [3.25] 48 [1.90] NOTE: Dimension is found on page. (4) 3/8-16 UNC-2 16 [.62] Min. Deep 1,4 [.055] 1,1 [.045] F37 4-Hole Manifold Ports 39 [1.53] 45 [1.76] 49 [1.94] 39 [1.53] 2 [.06] 43 [1.70] 14 [.56] 3 [.] 14 [.56] 48 [1.90] 39 [1.53] 32 [1.25] 23 [.90] 39 [1.53] 32 [1.25] 23 [.90] Ø 83 [3.25] 48 [1.90] (4) 3/8-16 UNC-2 16 [.62] Min. Deep 1,4 [.055] 1,1 [.045] (2) Ø 1/2 Port Ø 17 [.68] Spotface x 2 [.07] Deep (4) 5/16-18 UNC -13 [.50] Deep F39 4-Hole 7/8 O-Ring Offset Ports With Valve Cavity 49 [1.94] 33 [1.31] 43 [1.70] 45 [1.76] 39 [1.53] 91 [3.58] 3 [.] 2 [.06] 48 [1.90] 37 [1.44] 14 [.57] 48 [1.90] 22 [.85] 39 [1.53] Ø 83 [3.25] 1,4 [.055] 1,1 [.045] 43 [1.70] 75 [2.97]
whitedriveproducts RS 200 & 201 Series housings (SE mounts) NOTE: Dimensions shown are without paint. Paint thickness can be up to 0,13 [.005] 2-Hole 1/2 NPT ligned Ports 11 2-Hole 7/8 O-Ring ligned Ports 18 2-Hole 1/2 SP.F ligned Ports 60 [2.38] 60 [2.38] C 51 [2.00] 3,2 [.5] 41 [1.63] Ø1,4 [3.992] Ø1,6 [3.999] 177 [6.96] 46 [1.80] 23 [.90] Ø146 [5.75] 3 [.] 13,3 [.522] 13,1 [.514] 2 [.06] 70 2-Hole 1/2 NPT Side Ports 71 2-Hole 7/8 O-Ring Side Ports 72 2-Hole 1/2 SP.F Side Ports 177 [6.96] 56 [2.21] C 41 [1.61] Ø146 [5.75] 3,2 [.5] 60 [2.38] 31 [1.22] Ø1,4 [3.992] Ø1,6 [3.999] 25 [.98] 60 [2.38] 13,3 [.522] 13,1 [.514] 51 [2.00] NOTE: Dimension C is found on page. 11
RS 200 & 201 Series technical information earing Curve: The bearing curve below represents the side load capacity of the motor at the centerline of the key for various motor speeds. 700 600 500 400 300 200 0 0 200 300 400 500 dan RPM 0 0 200 300 400 500 600 700 800 900 00 10 00 1300 lbs. whitedriveproducts LENGTH / WEIGHT CHRT SE Mount - Dimension Code mm [in] kg [lb] 050 134 [5.29] 7,3 [16.1] 080 138 [5.44] 7,5 [16.5] 090 140 [5.51] 7,6 [16.8] 0 146 [5.75] 8,0 [17.7] 1 144 [5.65] 7,8 [17.2] 5 146 [5.75] 8,0 [17.7] 160 152 [5.97] 8,3 [18.2] 200 158 [6.22] 8,5 [18.8] 250 166 [6.53] 9,0 [19.8] 300 172 [6.76] 9,3 [20.5] 400 190 [7.47],3 [22.7] NOTE: RS motor weights vary ± 0,5 kg [1 lb] depending upon motor configuration. allowable side load Operating conditions within the shaded area will maintain acceptable oil film lubrication with recommended fluids. Operating conditions outside the shaded area are susceptible to motor failure due to oil starvation and/or excessive heat generation. Fluids with low lubricity or low viscosity may require the maximum load and speed ratings to be derated to provide acceptable motor life and performance. Thrust Load 222 dan [500 lbs] LENGTH / WEIGHT CHRT Square Mount - Dimension Code mm [in] kg [lb] 050 136 [5.36] 6,1 [13.4] 080 140 [5.50] 6,3 [13.9] 090 142 [5.58] 6,4 [14.1] 0 148 [5.82] 6,9 [15.1] 1 145 [5.72] 6,6 [14.6] 5 148 [5.82] 6,9 [15.1] 160 153 [6.04] 7,0 [15.4] 200 160 [6.29] 7,3 [16.0] 250 167 [6.59] 7,8 [17.1] 300 173 [6.83] 8,1 [17.9] 400 192 [7.54] 9,2 [20.2] NOTE: RS motor weights vary ± 0,5 kg [1 lb] depending upon motor configuration. 445 dan [00 lbs] LENGTH / WEIGHT CHRT SE Mount - Dimension C Code mm [in] kg [lb] 050 134 [5.29] 8,5 [18.6] 080 138 [5.44] 8,6 [19.0] 090 140 [5.51] 8,8 [19.3] 0 146 [5.75] 9,2 [20.2] 1 144 [5.65] 8,9 [19.7] 5 146 [5.75] 9,2 [20.2] 160 152 [5.97] 9,4 [20.7] 200 158 [6.22] 9,7 [21.3] 250 166 [6.53],1 [22.3] 300 172 [6.76],5 [23.0] 400 190 [7.47] 11,5 [25.2] NOTE: RS motor weights vary ± 0,5 kg [1 lb] depending upon motor configuration.
whitedriveproducts RS 200 & 201 series shafts 05 1 Pinhole 1 Straight 15 1 Straight Extended Torque: 678 Nm [6000 lb-in] D 37 [1.45] Mounting Flange Torque: 655 Nm [5800 lb-in] 6,4 [.251] 6,4 [.250] 26,0 [1.020] 24,6 [.970] 18 [.70] Min. D *39 [1.52] Mounting Flange 16 [.63] **6 [.25] Ø25,4 [.999] Ø25,3 [.998] 30 28,2 [1.1] 28,0 [1.1] Ø25,4 [.999] Ø25,3 [.998] 30 9 [.37] 5/16-18UNC 6,4 [.251] 6,4 [.250] 5/16-18 UNC NOTE: * For 15 shaft add 13 [.53] ** For 15 shaft substract 2 [.07] 13 1 Tapered 25mm Straight 16 25mm Straight Extended Torque: 655 Nm [5800 lb-in] 4,8 [.189] 4,8 [.188] 25 [1.00] 17 [.67] 4 [.16] D 47 [1.86] Mounting Flange 19,6 [.770] 18,3 [.720] Torque: 678 Nm [6000 lb-in] 8,0 [.314] 8,0 [.313] 18 [.70] Min. **6 [.24] D *45 [1.77] Mounting Flange 30,9 [1.218] 29,7 [1.168] 2,3 [.092] 4,8 [.189] 4,8 [.188] Ø25,4 [1.000] Ø25,4 [.999] 2 [.09] 3/4-28 Slotted Nut 1-1/8 cross Flats 1:8 Taper 15 27,8 [1.094] 27,6 [1.085] 7,0 [.277] 7,0 [.276] Ø25,0 [.984] Ø25,0 [.983] M8 x 1.25 30 NOTE: * For 16 shaft add 7 [.28] ** For 16 shaft substract 1 [.03] 01 13 Tooth Spline Torque: 170 Nm [1500 lb-in] 02 6- Spline Torque: 429 Nm [3800 lb-in] D 37 [1.46] Mounting Flange 18 [.71] D Mounting Flange 6,2 [.245] 6,1 [.243] 25 [1.00] Min. 18 [.70] Min. Ø22,2 [.874] Ø22,1 [.872] 30 Ø25,3 [.996] Ø25,2 [.992] 30 13 Tooth 16/32 Pitch Std. NSI 92.1-1996 Spline 5/16-18 UNC-2 Ø 20,6 [.8] 1.00-6 Spline (SE J499 Std.) 5/16-18 UNC MOUNTING FLNGE TO SHFT END - Dimension D Code SE Mounts Square Mounts SE Mounts 01 42 [1.65] 40 [1.58] 42 [1.65] 02 45 [1.76] 43 [1.69] 45 [1.76] 05 45 [1.76] 43 [1.69] 45 [1.76] 45 [1.76] 43 [1.69] 45 [1.76] 54 [2.13] 52 [2.06] 54 [2.13] 13 57 [2.24] 55 [2.17] 57 [2.24] 15 58 [2.29]* 56 [2.22]** 58 [2.29] 16 58 [2.29]* 56 [2.22]** 58 [2.29] NOTE: Shaft lengths vary ± 0,8 mm [.030 in.]. * Subtract 18,5 [.730] when a sensor flange is ordered. ** Subtract 17,0 [.670] when a sensor flange is ordered. 13
RS 200 & 201 series model code uilder whitedriveproducts SERIES DISPLCEMENT HOUSING SHFT PINT CVITY DD ON MISCELLNEOUS STEP 1 STEP 2 STEP 3 STEP 4 STEP 5 STEP 6 STEP 7 STEP 8 STEP 1 - Select a series 200 201 Clockwise Rotation Counterclockwise Rotation STEP 2 - Select a displacement option 050 080 090 0 1 5 STEP 3 - Select a housing option 11 13 17 18 19 62 63 67 68 70 71 72 11 18 70 71 78 200 201 NOTE: For applications requiring the motor to rotate in only one direction, shaft seal life may be prolonged by pressurizing the port of the motor. To obtain the desired direction of shaft rotation, use the graphic above to determine the rotation code for the motor. For bi-directional applications, the 200 series is recommended. Preferred rotation is based on rotor timing. Changing preferred direction requires no additional parts. 52 cc [3.2 in3/rev] 76 cc [4.6 in3/rev] 89 cc [5.4 in3/rev] 3 cc [6.3 in3/rev] 111 cc [6.8 in3/rev] 7 cc [7.7 in3/rev] 160 200 250 300 400 2-Hole 1/2" NPT ligned Ports (S) 2-Hole 7/8" O-ring ligned Ports (S) 2-Hole 1/2" SP.F Offset Ports (S) 2-Hole1/2" SP.F Offset Manifold (S) 164 cc [.0 in3/rev] 205 cc [.5 in3/rev] 254 cc [15.5 in3/rev] 293 cc [17.9 in3/rev] 409 cc [24.9 in3/rev] 2-Hole Manifold Ports (S) 2-Hole 1/2" SP.F ligned (S) 2-Hole 7/8" O-ring With Valve Cavity (S) 2-Hole 1/2" SP.F Offset w/.200 Pilot 2-Hole 1/2" SP.F Offset Manifold w/.200 Pilot 2-Hole Manifold Ports w/.200 Pilot 2-Hole 1/2" SP.F ligned w/.200 Pilot 2-Hole 1/2" NPT Side Ports (S) 2-Hole 7/8" O-ring Side Ports (S) 2-Hole 1/2" SP.F Side Ports (S) 2-Hole SE Flange 1/2" NPT ligned 2-Hole SE Flange 7/8" O-ring ligned 2-Hole SE Flange 1/2" SP.F ligned 2-Hole SE Flange 1/2" NPT Side Ports 2-Hole SE Flange 7/8" O-ring Side Ports 2-Hole SE Flange 1/2" SP.F Side Ports STEP 3 (Continued) - Select a housing option F30 F31 F37 F39 4-Hole 1/2" NPT ligned Ports (S) 4-Hole 7/8" O-ring ligned Ports (S) 4-Hole Manifold Ports (S) 4-Hole 7/8" O-Ring W/Valve Cavity (S) STEP 4 - Select a shaft option 01 02 05 STEP 5 - Select a paint option Z lack lack (unpainted flange face) No Paint STEP 6 - Select a valve cavity option C D E F G STEP 8 - Select a miscellaneous option C 7/8" 13 Tooth 1" 6- Spline 1" Pinhole 1" Straight None Freeturning Rotor 13 15 16 None Relief Valve Cavity 69 bar [00 psi] Relief Valve Installed 86 bar [50 psi] Relief Valve Installed 4 bar [1500 psi] Relief Valve Installed 1 bar [1750 psi] Relief Valve Installed 138 bar [2000 psi] Relief Valve Installed NOTE: Valve cavity option is only available on the 19 and F39 housings. STEP 7 - Select an add on option C W X Y Z 25mm Straight 1" Tapered 1" Straight Ext. (S) 25mm Ext. (S) Standard Lock Nut Solid Hex Nut 4-Pin Dual Male Weatherpack Connector (S) 4-Pin M Dual Male Connector (S) 3-Pin Single Male Weatherpack Connector (S) 4-Pin M Single Male Connector (S) NOTE: (S) - STEP 3 Housings available for use with speed sensors. STEP 4 Shafts available for use with speed sensors. STEP 7 Speed sensor options. 14
Important Information efore selecting or using a White Drive Products product, it is important that all information concerning the product warranty, limitation of liability and responsibility of the customer be reviewed. This information is located below. Please direct any questions regarding this information to your White Drive Products representative. Disclaimer This catalog provides product options for further investigation by customers having technical expertise with respect to the use of such products. It is the responsibility of the customer to thoroughly analyze all aspects of the customer s application and to review the information concerning the product in the current product catalog. Due to the diversity of possible applications, the customer is solely responsible for making the final selection of the product(s) to be used and to assure that all performance, safety and warning requirements of the application are met. The customer is further responsible for all testing to verify acceptable life and performance of White Drive Products products under actual operating conditions. White Drive Products has made all reasonable efforts to present accurate information in this catalog and shall not be responsible for any incorrect information which may result from unintentional oversight. Due to continuous product improvement, the product specifications as stated in this catalog are subject to change by White Drive Products at any time without notice. The customer should consult a sales representative of White Drive Products for detailed information and to determine any changes in the information in this catalog. Improper selection or improper use of the products described herein can result in death, personal injury and/or property damage. White Drive Products, Inc. s sole responsibility with respect to its products is set forth in the warranty/limitation of liability policy state herein. Warranty White Drive Products products are sold subject to a limited warranty and a limitation of remedies policy, both of which constitute part of any and all agreements to purchase White Drive Products products. White Drive Products makes no other warranties or promises other than those specifically noted in its written policies, and no White Drive Products employee or agent has the power to alter those policies other than in writing. other fine products available from white drive products a complete range of lsht hydraulic motors hydraulic controlled pressure released brakes
Delivering The Power To Get Work Done. United States White Drive Products, Inc. P.O. ox 17 Hopkinsville, KY. US 42241 Phone: +1.270.885.11 Fax: +1.270.886.8462 infousa@whitedriveproducts.com Germany White Drive Products GmbH Mannsnetterstrasse 34 D-40880 Opfenbach, Germany Phone: +49 8385 924988 0 Fax: +49 8385 924988 9 infoeu@whitedriveproducts.com China White (China) Drive Products Co., Ltd. 1-8 Ning Zhen Gong Lu Zhenjiang, 2021, Jiangsu, China Phone: +86 511 5729988 Fax: +86 511 5728921 infochina@whitedriveproducts.com www.whitedriveproducts.com RS Series Catalog - rev. 3..