Crawler Excavator R PDF Free Download

Crawler Excavator R 956 Operating Weight: 117,945 123,020 lb Engine Output (SAE J1349): 322 HP / 240 kw Engine Output (ISO 9249): 326 HP / 240 kw Bucket Capacity: 1.63 4.32 yd³

R 956 Operating Weight Engine Output (SAE J1349): Engine Output (ISO 9249): Bucket Capacity: 117,945 123,020 lb 322 HP / 240 kw 326 HP / 240 kw 1.63 4.32 yd3 2 R 956 Litronic

Liebherr Engine New Tier 4i engine Designed specifically for mass excavation and construction applications Liebherr Common Rail Injection system with three times less load losses than a conventional Common Rail system Automatic fuel-saving idling system Two-stage turbocharging with intercooler, for increased power at low revs and reduced fuel consumption 4 R 956 Litronic

Performance Responsive and precise, the R 956 crawler excavator allows the operator to perform a large range of tasks while working at earthmoving sites or in quarries. Due to their tried and tested hydraulic design and various work modes, Liebherr excavators provide the maximum in reliability and performance. Technology serving productivity Liebherr Integration Regeneration plus Power and speed Increased break-out force Faster cycles All major components are designed and manufactured within the Liebherr group. This includes components such as the diesel engine, hydraulic pumps, electronic components. Also produced in-house are the essential mechanical elements including hydraulic cylinders, the swing ring and working tools. Inhouse production of these components ensures and results in an overall increase in productivity. The Regeneration Plus function allows for the accelerated lowering of the boom, improving the work cycle without sacrificing pressure. The optimization and combination of the zero-pressure lowering of the boom and Regeneration plus functions, together with the increased power of the hydraulics, provide increased performance and lower fuel consumption. Due to its kinematics and hydraulic power, the R 956 crawler excavator has increased break-out and digging forces. Extra large cylinders allows the operator to increase the break-out performance when working in hard materials. The mechanical link between the rotation engine and swing bearing gives the machine a high torque and swing speed, thus improving operating cycles. Choice of work mode The different work modes offered allows the operator to adapt the power of the excavator to the application E Mode - Economy: for economical and ecologically-friendly operation. Minor restriction of power without affecting the load lifting and excavating capacities. Highly recommended for light and moderate working conditions P Mode - Power: for high excavation capacities and tough applications. Pump flow and power are not limited S Mode - Sensitivity: for precision jobs and loading of materials. The pump flow and power are restricted to attain optimal sensitivity P+ Mode - Full Power: especially designed for increased power; only recommended for extreme applications Floating Boom Function Increased hydraulic flow for the other cylinders (stick and/or bucket for example) Increased power, making it easier to extract materials and reduce work cycle times Increased service life when a hydraulic hammer is used R 956 Litronic 5

Liebherr particle filter Designed and manufactured by Liebherr, it eliminates more than 99% (VERT certification) of fine particle emissions Active regeneration of the particle filter, causing no interruption to the operator without reducing the machine s performance The central module (filter unit) is removable and easily accessible for maintenance 6 R 956 Litronic

Reliability The R 956 crawler excavator is designed and engineered according to our customer s specific needs for ideal performance under the toughest of operating conditions. Fully-tested strength Improved and reinforced undercarriage Safe travel Strengthened uppercarriage Quality serving safety Finest details ROPS cab structure With an X-shaped design and an increased swing ring, the new undercarriage is specifically designed for optimal weight distribution minimizing stress over the whole structure. This results in increased performance, greater load capacities and an increased service life. The addition of 3 track chain guides per track as standard significantly reduces the risk of the tracks coming off. In addition, track pins and bearings are lubricated for life, which reduces both maintenance and down time. The uppercarriage has been reinforced with heavier steel to ensure increased strength. The HD boom and stick are standard - improving resistance to the impact of materials. Similarly, the system of cast and welded housings on the boom allows for an improved distribution of weighted stress on the boom. The hydraulic, electric and lubrication lines are laid out to ensure optimum operating safety and maximum availability. The finish paint applied before assembly and the appropriate surface treatment of the components guarantee maximum protection against corrosion. The integration of the rear camera in the counter weight highlights the overall concept of quality, safety and reliability. The cab is equipped with an integrated roll over protection system (ROPS), pursuant to standard ISO 12117-2. Undercarriage New design for increased life and improved distribution of forces The sloping design of the track frame leads to a more efficient and faster cleaning of the undercarriage Easy and safe transport thanks to integrated securing hooks Key components developed by Liebherr Specific tools and custom protection can be added at the factory Perfect harmonization of the machine elements, designed specifically for earthmoving and quarry applications Engine, hydraulic pumps, transfer box, transmission, rotating mechanism, swing ring, cylinders and electronic components are designed and manufactured by Liebherr Purpose built options such as special attachment lengths, specific tools and custom protection can be added at the factory R 956 Litronic 7

Touch-screen display 7 color touchscreen Several available settings, control and camera options Robust and reliable design (Ingress Protection Rating IP65) High resolution video for displaying the rear camera image 8 R 956 Litronic

Comfort The new, more spacious operator s cab is designed to meet the latest standards in ergonomic comfort. The new cab design provides the operator with exceptional comfort, ease of operation, a wider range of view of the working area, as well as a soundproof environment. It s just about feeling good A spacious and ergonomic operator s cab Fully automatic air-conditioning The cab provides generous space for maximum comfort. Equipped, among other things, with an airsuspended seat with heater as standard (optional with air-conditioning), joystick controls connected to the seat and high-performance automatic airconditioning. The cab creates a pleasant working environment. All the controls are laid out in an easy to recognize manner so that the operator can concentrate on working. The cab is mounted on viscoelastic studs for significantly lower vibration. The automatic air-conditioning with touchscreen controls has several ventilation outlets for optimum ambient air in the cab. High resolution color touchscreen An operator s cab that s easy to clean The color touchscreen is a user-friendly interface for controlling several functions, such as the radio, tool types, and even the backup camera. Working in a clean environment played an important role when designing the new cab. It is particularly easy to maintain due to elements such as a keyboard with soft touch comfort keys and an easily accessible cab air filter. Increased visibility Rear camera integrated in the counterweight as standard, for rear visibility and increased operating safety Optimized design of the whole uppercarriage providing the operator with an improved field of vision Retractable laminated glass roof panel Joystick Sensitive joystick with proximity switch (controlled by approach of the operator s hand) for greater responsiveness when resuming operations Proportional attachment control for heightened job precision R 956 Litronic 9

Liebherr tools Wide range of tools suitable for every type of application Tools designed for maximum productivity and durability Shape of buckets designed to assist the filling and stability of bulky materials during the transport stages Hydraulic quick coupler system 10 R 956 Litronic

Economy Crawler excavators from Liebherr guarantee maximum productivity. These excavators allow you to target essential operations and reduce operating costs in order to obtain the best return on investment. The best choice Low operating costs LIDAT fleet and machine park management tool Due to its innovative technology, Liebherr increases the performance of its machines while reducing fuel consumption. Examples of this are the new diesel engine, automatic idling, electronic engine speed sensing control, Regeneration Plus function and the hydrostatic cooling system (fans operate only when necessary). The reduced fuel consumption means less pollution. To improve machine management, Liebherr has developed its own data transmission system using the GPRS network. This system allows you to instantly know the position of your excavator via a web interface. As a result of data transmission, the LIDAT system developed and manufactured by Liebherr keeps you informed about fuel consumption, number of service hours or machine faults, just to name a few. LIDAT allows you to be more proactive in organizing and maintaining your fleet for increased productivity. Spare Parts Extensive USA spare parts inventory located at Liebherr s Newport News, Virginia headquarters Maintenance Automatic centralized lubrication as standard for regular lubrication of critical points and reduced machine down times. Lubrication for cutting costs and increasing the service life of the components Hydraulic tank shutoff valve for easy and quick cut-off the hydraulic circuit: complete drainage not required for necessary repair of the system R 956 Litronic 11

R 956 Backhoe Visibility Rear camera integrated in the counterweight Two boom-mounted lights - standard Optimized design of the whole uppercarriage providing the operator with a better field of vision Automatic centralized lubrication - standard Reduced maintenance time Longer service life due to better lubrication Undercarriage Robust structure as a result of the X-shaped profile Improved self-cleaning capacity Special heat treatment for low wear and tear of drive sprockets 3 track guides - standard 12 R 956 Litronic

Equipment Cast steel elements Optimal weight distribution Longer service life Operator s cab New design Comfortable and ergonomic 7 high resolution color touchscreen Rear window with improved visibility Tools Z-type Liebherr teeth for fast replacement Wide range of work tools R 956 Litronic 13

Technical Data Engine Rating per SAE J1349 322 HP (240 kw) at 1,800 rpm Rating per ISO 9249 326 HP (240 kw) at 1,800 rpm Model Liebherr D 936 A7 Type 6 cylinder in-line Bore/Stroke 4.8/5.9 in Displacement 640 in 3 Engine operation 4-stroke diesel Common-Rail, bi-turbo exhaust-gas recirculation (eagr) Exhaust gas treatment particle filter with active regeneration emission standard Tier 4i Cooling water-cooled and integrated motor oil cooler, aftercooled and fuel cooled Air cleaner dry-type air cleaner with pre-cleaner, primary and safety elements Fuel tank 211 gal Electrical system Voltage 24 V Batteries 2 x 180 Ah/12 V Starter 24 V/7.8 kw Alternator three phase current 28 V/100 A Engine idling sensor-controlled Motor management connection to the integrated excavator system controlling via CAN-BUS to the economical utilization of the service that is available Hydraulic System Hydraulic pump for attachment and travel drive two Liebherr variable flow, swash plate pumps Max. flow 2 x 81 gpm Max. pressure 5,076 psi Pump regulation electro-hydraulic with electronic engine speed sensing regulation, pressure compensation, flow compensation, automatic oil flow optimizer Hydraulic pump for swing drive reversible, variable flow, swash plate pump, closed-loop circuit Max. flow 56 gpm Max. pressure 5,149 psi Hydraulic tank 100 gal Hydraulic system 177 gal Hydraulic oil filter 2 full flow filters in return line with integrated fine filter area (5 µm) Hydraulic oil cooler compact cooler for water cooler, after- cooler, fuel cooler and transmission pump oil, sandwiched with cooler for oil and condenser of air-condition ing with hydrostatically controlled fan drives MODE selection adjustment of engine and hydraulic performance via a mode pre-selector to match application for especially economical and environmentally friendly operation or for maximum digging performance and heavyduty jobs RPM adjustment stepless adjustment of engine output via RPM at each selected mode Tool Control 10 preadjustable pump flows and pressures for add-on tools Hydraulic Controls The controlling is conducted via the integrated excavator system technology, input and output modules, communicated via the CAN-BUS with the electronic central unit. Power distribution via control valves in single block with integrated safety valves Flow summation to boom and stick Closed-loop circuit for uppercarriage swing drive Servo circuit Attachment and swing proportional via joystick levers Travel proportional via foot pedals or removable hand levers speed pre-selection Additional functions via foot pedals or joystick toggle switch Swing Drive Drive by Liebherr swash plate motor with integrated brake valves Transmission Liebherr compact planetary reduction gear Swing ring Liebherr, sealed single race ball bearing swing ring, internal teeth Swing speed 0 6.1 rpm stepless Swing torque 121,700 lbf ft Holding brake wet multi-disc (spring applied, pressure released) Option pedal controlled positioning brake Operator s Cab Cab ROPS safety cab structure (capable of sweeping over) with individual windscreens or featuring a slidein subpart under the ceiling, work headlights integrated in the ceiling, a door with a side window (can be opened on both sides), large stowing and depositing possibilities, shock-absorbing suspension, sounddamping insulating, tinted laminated safety glass, separate window shades for the sunroof window and windscreen, 12 V plug, storage bins, lunchbox, cup holder Operator s seat Liebherr-Comfort seat, airsprung with automatic weight adjustment, vertical and horizontal seat damping including consoles and joysticks. Seat and armrests adjustable separately and in combination, seat heating as standard Control system arm consoles, swinging with the seat Operation and displays large high resolution colour display with self-explanatory operation via touch screen, video, versatile adjusting, control and monitoring facilities, e.g. climate control, implement and tool parameters Air-conditioning standard automatic air-conditioning, ambient air function, fast de-icing and demisting at the press of a button, air vents can be operated via a menu; ambient air and fresh air filters can be easily replaced and are accessible from the outside; heating- cooling unit, designed for extreme outside temperatures, sensors for solar radiation, inside and outside temperatures Noise emission ISO 6396 L pa (inside cab) = 72 db(a) 2000/14/EC L WA (surround noise) = 106 db(a) Undercarriage HD gauge 9 6 Drive Liebherr swash plate motor with integrated brake valves Transmission Liebherr planetary reduction gears Travel speed low range 1.5 mph high range 2.2 mph Net drawbar pull on crawler 93,071 lbf Track components D 8, maintenance-free Track rollers/carrier rollers 9/2 Tracks sealed and greased Track pads triple grouser Digging locks wet multi-discs (spring applied, pressure released) Brake valves integrated into travel motor Lashing eyes integrated Attachment Type combination of resistant steel plates and cast steel components Hydraulic cylinders Liebherr cylinders with special seal-system, shock protection Pivots sealed, low maintenance Lubrication automatic central lubrication system (except connecting link for bucket kinematics) Hydraulic connections pipes and hoses equipped with SAE split-flange connections Bucket standard equipped with Liebherr tooth system 14 R 956 Litronic

Dimensions E D A W H C K Q P V L U Z N S B G R0058 X ft in A 9 9 C 10 11 /11 7 1) D 12 7 /13 2) /12 1 3) E 12 7 /13 2) /12 1 3) H 9 8 h 4 3 K 4 5 L 14 9 l 3 P 4 Q 1 11 U 18 3 S 9 6 N 20 24 30 B 11 4 11 6 12 G 12 2 12 2 12 2 Z 21 8 /22 1 2) /21 2 3) 1) with FOPS top guard 2) with removable counterweight 26,455 lb 3) without removable counterweight 26,455 lb Stick Gooseneck Gooseneck Semi- Gooseneck Length Boom Boom Gooseneck Boom 22 24 11 Boom 30 2 26 3 ft in ft in ft in ft in ft in V 7 9 25 5 25 3 27 5 9 6 23 7 27 3 25 11 28 8 12 6 30 10 4) 24 3 27 1 29 6 16 5 25 5 21 4 29 8 W 7 9 12 10 12 10 11 8 9 6 13 13 12 13 7 12 6 12 10 4) 13 1 12 6 13 11 16 5 14 3 21 4 13 3 X 7 9 39 10 /40 4 2) /39 4 3) 43 4 /43 10 2) /42 11 3) 45 1 /45 7 2) /44 7 3) 9 6 40 /40 6 2) /39 6 3) 43 4 /43 10 2) /42 11 3) 44 9 /45 3 2) /44 3 3) 48 9 /49 3 2) /48 4 3) 12 6 39 10 /40 4 2) /39 4 3) 43 4 /43 10 2) /42 11 3) 44 9 /45 3 2) /44 3 3) 48 9 /49 3 2) /48 4 3) 16 5 48 9 /49 3 2) /48 4 3) 21 4 48 7 /49 1 2) /48 2 3) 4) without bucket D(3) W h l Weight: 23,148 lb R0137.01 X(3) Z(3) R 956 Litronic 15

Backhoe Bucket with Gooseneck Boom 22 and Heavy Counterweight ft 40 35 30 25 20 15 10 5 0-5 -10-15 -20-25 -30 m R0138 12 11 10 9 8 7 6 5 4 3 2 1 0-1 -2-3 -4-5 -6 1-7 2-8 3-9 -10 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0 m 45 40 35 30 25 20 15 10 5 0 ft Digging Envelope 1 2 3 Stick length ft in 7 9 9 6 12 6 Max. digging depth ft in 23 5 25 3 28 3 Max. reach at ground level ft in 36 5 37 9 40 8 Max. dump height ft in 23 2 23 11 25 3 Max. teeth height ft in 34 7 35 7 37 1 Digging Forces 1 2 3 Digging force ISO lbf 55,755 48,785 40,690 lb 56,880 48,720 41,005 Breakout force ISO lbf 70,365 70,365 70,365 lb 70,325 70,325 70,325 Breakout force max. ISO 77,560 lbf (77,605 lb) Operating Weight and Ground Pressure Operating weight includes basic machine with heavy counterweight (24,250 lb), gooseneck boom 22, stick 9 6 and bucket 3.92 yd 3. Undercarriage Pad width in 20 24 30 Weight lb 119,270 120,485 122,245 Ground pressure psi 15.8 13.2 10.8 HD Buckets Machine stability per ISO 10567* (75% of tipping capacity) HD-Undercarriage STD 1) HD 2) Cutting width Capacity ISO 7451 Weight Stick length (m) 7 9 9 6 12 6 in yd 3 lb 53 2.16 4,630 X X X 61 2.62 4,960 X X X 69 3.07 5,510 X X X 77 3.53 5,840 X X Y 77 3.92 6,065 X Y V 83 4.32 6,615 Y V y 53 2.16 5,290 X X X 61 2.62 5,950 X X X 69 3.07 6,505 X X Y 77 3.53 7,055 X Y V 83 3.92 7,385 Y V y * Indicated loads are based on ISO 10567 max. stick length, lifted 360 on firm 1) Standard bucket with Liebherr teeth Z 70 (appropriate for materials up to classification 5, according to VOB, Section C, DIN 18300) 2) HD bucket with Liebherr teeth Z 70 (appropriate for materials above classification 6, according to VOB, Section C, DIN 18300) Other backhoes available on request Max. material weight X = 3,708 lb/yd 3, Y = 3,034 lb/yd 3, V = 2,528 lb/yd 3, y = 2,023 lb/yd 3, v = not authorized 16 R 956 Litronic

Lift Capacities with Gooseneck Boom 22 and Heavy Counterweight Stick 7 9 Stick 9 6 Underft in carriage 5 ft 10 ft 15 ft 20 ft 25 ft 30 ft ft in Underft in carriage 5 ft 10 ft 15 ft 20 ft 25 ft 30 ft ft in 40 HD 40 HD 35 HD 35 HD 30 HD 30 HD 17,4* 17,4* 22 4 25 HD 20,5* 20,5* 24 6 25 HD 23,0* 23,0* 15,8* 15,8* 26 7 20 HD 28,3* 28,3* 25,6* 25,6* 19,6* 19,6* 27 7 20 HD 23,7* 23,7* 15,2* 15,2* 29 5 15 HD 45,1* 45,1* 32,5* 32,5* 26,9 27,3* 19,5* 19,5* 29 5 15 HD 40,4* 40,4* 30,3* 30,3* 25,7* 25,7* 20,4 23,5* 15,1* 15,1* 31 2 10 HD 34,9 37,0* 25,7 29,5* 19,8 25,4* 19,5 20,1* 30 4 10 HD 39,7* 39,7* 35,2* 35,2* 25,9 28,2* 19,9 24,5* 15,5* 15,5* 32 5 HD 33,4 40,1* 24,8 31,3* 19,4 26,3* 19,1 21,5* 30 4 5 HD 28,7* 28,7* 33,7 39,0* 24,9 30,4* 19,3 25,6* 16,5* 16,5* 32 0 HD 35,3* 35,3* 32,7 41,0* 24,3 32,1* 19,7 23,9* 29 5 0 HD 41,2* 41,2* 32,7 40,7* 24,2 31,7* 19,0 26,0* 18,0 18,1* 31 2 5 HD 32,4* 32,4* 50,4 51,5* 32,7 39,7* 24,2 31,1* 21,5 27,2* 27 7 5 HD 33,3* 33,3* 49,9 53,7* 32,4 40,2* 23,9 31,4* 19,4 21,0* 29 5 10 HD 57,1* 57,1* 45,8* 45,8* 33,2 35,7* 25,5 27,4* 24 6 10 HD 56,9* 56,9* 48,9* 48,9* 32,7 37,3* 24,2 28,8* 22,4 26,0* 26 7 15 HD 35,3* 35,3* 26,0* 26,0* 19 8 15 HD 52,7* 52,7* 40,2* 40,2* 30,4* 30,4* 25,6* 25,6* 22 4 20 HD 20 HD Stick 12 6 Underft in carriage 40 HD 35 HD 30 HD 25 HD 5 ft 10 ft 15 ft 20 ft 25 ft 30 ft ft in 12,0* 12,0* 26 2 11,1* 11,1* 29 11 20 HD 15 HD 10 HD 5 HD 0 HD 5 HD 10 HD 15 HD 20 HD 20,8* 20,8* 20,2* 20,2* 10,7* 10,7* 32 6 26,6* 26,6* 23,2* 23,2* 20,8 21,3* 10,6* 10,6* 34 44,7* 44,7* 32,0* 32,0* 26,0* 26,0* 20,1 22,8* 10,9* 10,9* 34 10 46,5* 46,5* 34,4 36,7* 25,2 28,8* 19,4 24,3* 11,5* 11,5* 34 10 16,9* 16,9* 45,4* 45,4* 33,0 39,7* 24,3 30,7* 18,9 25,4* 12,5* 12,5* 34 23,0* 23,0* 30,5* 30,5* 49,5 55,8* 32,3 40,5* 23,7 31,5* 18,6 25,5* 14,2* 14,2* 32 6 35,6* 35,6* 45,8* 45,8* 49,8 52,7* 32,3 39,2* 23,7 30,5* 17,1* 17,1* 29 11 50,3* 50,3* 65,3* 65,3* 46,4* 46,4* 32,8 35,0* 24,2 26,3* 22,9 23,0* 26 2 47,1* 47,1* 34,6* 34,6* 24,3* 24,3* 23,2* 23,2* 20 6 Height Can be slewed though 360 In longitudinal position of undercarriage Max. reach * Limited by hydr. capacity The load values are quoted in lb x 1,000 at stick end (without bucket), and may be swung 360 on firm and even ground. Adjacent values are valid for the undercarriage when in the longitudinal position. Capacities are valid for 30 wide triple grouser pads. Indicated loads are based on ISO 10567 standard and do not exceed 75 % of tipping or 87 % of hydraulic capacity (indicated via *). Without bucket cylinder, link and lever the lift capacities will increase by 1,765 lb. Lifting capacity of the excavator is limited by machine stability and hydraulic capacity. R 956 Litronic 17

Backhoe Bucket with Gooseneck Boom 24 11 and Heavy Counterweight ft 40 35 30 25 20 15 10 5 0-5 -10-15 -20-25 -30 m 13 R0139 12 11 10 9 8 7 6 5 4 3 2 1 0-1 -2-3 -4-5 -6-7 -8 1 2-9 3-10 15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0 m 50 45 40 35 30 25 20 15 10 5 0 ft Digging Envelope 1 2 3 Stick length ft in 7 9 9 6 12 6 Max. digging depth ft in 25 1 26 11 29 10 Max. reach at ground level ft in 39 2 41 43 10 Max. dump height ft in 26 7 27 7 29 2 Max. teeth height ft in 38 5 39 6 41 4 Digging Forces 1 2 3 Digging force ISO lbf 55,755 48,785 40,690 lb 56,880 48,720 41,005 Breakout force ISO lbf 70,365 70,365 70,365 lb 70,325 70,325 70,325 Breakout force max. ISO 77,560 lbf (77,605 lb) Operating Weight and Ground Pressure Operating weight includes basic machine with heavy counterweight (24,250 lb), gooseneck boom 24 11, stick 9 6 and bucket 3.53 yd 3. Undercarriage Pad width in 20 24 30 Weight lb 120,040 121,255 123,020 Ground pressure psi 15.9 13.4 11.0 HD Buckets Machine stability per ISO 10567* (75% of tipping capacity) HD-Undercarriage STD 1) HD 2) Cutting width Capacity ISO 7451 Weight Stick length (m) 7 9 9 6 12 6 in yd 3 lb 53 2.16 4,630 X X X 61 2.62 4,960 X X X 69 3.07 5,510 X X Y 77 3.53 5,840 X Y V 77 3.92 6,065 Y V y 83 4.32 6,615 V y v 53 2.16 5,290 X X X 61 2.62 5,950 X X Y 69 3.07 6,505 X Y V 77 3.53 7,055 Y V y 83 3.92 7,385 V y v * Indicated loads are based on ISO 10567 max. stick length, lifted 360 on firm 1) Standard bucket with Liebherr teeth Z 70 (appropriate for materials up to classification 5, according to VOB, Section C, DIN 18300) 2) HD bucket with Liebherr teeth Z 70 (appropriate for materials above classification 6, according to VOB, Section C, DIN 18300) Other backhoes available on request Max. material weight X = 3,708 lb/yd 3, Y = 3,034 lb/yd 3, V = 2,528 lb/yd 3, y = 2,023 lb/yd 3, v = not authorized 18 R 956 Litronic

Lift Capacities with Gooseneck Boom 24 11 and Heavy Counterweight Stick 7 9 Stick 9 6 Underft in carriage 10 ft 15 ft 20 ft 25 ft 30 ft 35 ft ft in Underft in carriage 10 ft 15 ft 20 ft 25 ft 30 ft 35 ft ft in 40 HD 40 HD 35 HD 35 HD 30 HD 22,1* 22,1* 24 4 30 HD 21,4* 21,4* 16,9* 16,9* 26 8 25 HD 23,1* 23,1* 20,3* 20,3* 28 4 25 HD 21,5* 21,5* 18,8* 18,8* 15,7* 15,7* 30 4 20 HD 38,7* 38,7* 28,8* 28,8* 24,4* 24,4* 20,2 22,3* 19,1 19,6* 31 20 HD 26,8* 26,8* 22,9* 22,9* 20,4 20,9* 15,1* 15,1* 32 10 15 HD 33,4* 33,4* 25,6 26,5* 19,6 23,0* 17,2 19,5* 32 7 15 HD 31,4* 31,4* 25,2* 25,2* 19,7 21,9* 15,1* 15,1* 34 5 10 HD 32,3 37,5* 24,3 28,6* 18,9 24,0* 16,2 20,0* 33 5 10 HD 32,9 35,8* 24,5 27,6* 18,9 23,2* 15,0 17,2* 14,9 15,4* 35 1 5 HD 31,1 39,1* 23,3 30,1* 18,3 24,8* 15,9 21,0* 33 5 5 HD 31,3 38,4* 23,3 29,4* 18,3 24,2* 14,7 18,2* 14,6 16,2* 35 1 0 HD 30,8 38,7* 22,8 30,5* 18,0 25,0* 16,3 22,5* 32 7 0 HD 30,6 38,8* 22,7 30,2* 17,8 24,7* 14,9 17,5* 34 5 5 HD 31,7* 31,7* 30,9 36,8* 22,7 29,6* 18,1 23,9* 17,4 22,6* 31 5 HD 34,7* 34,7* 30,6 37,7* 22,5 29,8* 17,7 24,2* 15,9 19,6* 32 10 10 HD 40,1* 40,1* 31,4 33,5* 23,1 27,0* 19,9 22,4* 28 4 10 HD 38,7* 38,7* 43,6* 43,6* 30,9 34,9* 22,7 27,9* 18,1 21,8* 17,8 21,2* 30 4 15 HD 33,1* 33,1* 27,5* 27,5* 21,1* 21,1* 24 4 15 HD 44,5* 44,5* 37,0* 37,0* 30,0* 30,0* 23,3* 23,3* 20,6* 20,6* 26 7 20 HD 20 HD 19,8* 19,8* 17,8* 17,8* 21 1 Stick 12 6 Underft in carriage 40 HD 35 HD 10 ft 15 ft 20 ft 25 ft 30 ft 35 ft ft in 13,2* 13,2* 25 7 30 HD 25 HD 20 HD 15 HD 10 HD 5 HD 0 HD 5 HD 10 HD 15 HD 20 HD 13,4* 13,4* 11,7* 11,7* 30 4 18,2* 18,2* 11,0* 11,0* 33 7 20,6* 20,6* 19,0* 19,0* 15,4* 15,4* 10,6* 10,6* 35 10 38,7* 38,7* 28,1* 28,1* 23,1* 23,1* 20,1 20,3* 15,6 18,6* 10,6* 10,6* 37 4 33,0* 33,0* 25,0 25,8* 19,2 21,8* 15,2 19,4* 10,8* 10,8* 38 32,0 36,7* 23,7 28,1* 18,4 23,2* 14,7 20,1* 11,3* 11,3* 38 22,3* 22,3* 30,8 38,5* 22,8 29,6* 17,8 24,2* 14,4 20,5* 12,1* 12,1* 37 4 18,6* 18,6* 34,0* 34,0* 30,4 38,4* 22,3 30,0* 17,5 24,3* 14,3 20,1* 13,4* 13,4* 35 10 32,5* 32,5* 47,4 48,1* 30,5 36,8* 22,3 29,0* 17,5 23,3* 15,2 15,5* 33 7 48,4* 48,4* 42,6* 42,6* 31,0 33,2* 22,7 26,2* 18,0 19,8* 17,8 19,2* 30 4 43,7* 43,7* 33,9* 33,9* 26,6* 26,6* 19,4* 19,4* 18,3* 18,3* 25 7 Height Can be slewed though 360 In longitudinal position of undercarriage Max. reach * Limited by hydr. capacity The load values are quoted in lb x 1,000 at stick end (without bucket), and may be swung 360 on firm and even ground. Adjacent values are valid for the undercarriage when in the longitudinal position. Capacities are valid for 30 wide triple grouser pads. Indicated loads are based on ISO 10567 standard and do not exceed 75 % of tipping or 87 % of hydraulic capacity (indicated via *). Without bucket cylinder, link and lever the lift capacities will increase by 1,765 lb. Lifting capacity of the excavator is limited by machine stability and hydraulic capacity. R 956 Litronic 19

Backhoe Bucket with Semi-Gooseneck Boom 26 3 and Heavy Counterweight ft 40 45 40 35 30 25 20 15 10 5 0-5 -10-15 -20-25 m 16 15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0-1 -2-3 -4-5 -6 1-7 2 3-8 -9 15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0 m 45 40 35 30 25 20 15 10 5 0 ft R0061 Digging Envelope 1 2 3 Stick length ft in 7 9 9 6 12 6 Max. digging depth ft in 20 4 22 2 25 1 Max. reach at ground level ft in 40 10 42 8 45 7 Max. dump height ft in 33 34 7 40 4 Max. teeth height ft in 45 9 47 3 49 10 Digging Forces 1 2 3 Digging force ISO lbf 55,755 48,785 40,690 lb 56,880 48,720 41,005 Breakout force ISO lbf 70,365 70,365 70,365 lb 70,325 70,325 70,325 Breakout force max. ISO 77,560 lbf (77,605 lb) Operating Weight and Ground Pressure Operating weight includes basic machine with heavy counterweight (24,250 lb), semi-gooseneck boom 26 3, stick 9 6 and bucket 3.07 yd 3. Undercarriage Pad width in 20 24 30 Weight lb 119,820 121,035 122,795 Ground pressure psi 15.9 13.4 11.0 HD Buckets Machine stability per ISO 10567* (75% of tipping capacity) HD-Undercarriage STD 1) HD 2) Cutting width Capacity ISO 7451 Weight Stick length (m) 7 9 9 6 12 6 in yd 3 lb 53 2.16 4,630 X X X 61 2.62 4,960 X X Y 69 3.07 5,510 X Y V 77 3.53 5,840 Y V y 77 3.92 6,065 V y v 53 2.16 5,290 X X Y 61 2.62 5,950 X Y V 69 3.07 6,505 Y V y 77 3.53 7,055 V y v * Indicated loads are based on ISO 10567 max. stick length, lifted 360 on firm 1) Standard bucket with Liebherr teeth Z 70 (appropriate for materials up to classification 5, according to VOB, Section C, DIN 18300) 2) HD bucket with Liebherr teeth Z 70 (appropriate for materials above classification 6, according to VOB, Section C, DIN 18300) Other backhoes available on request Max. material weight X = 3,708 lb/yd 3, Y = 3,034 lb/yd 3, V = 2,528 lb/yd 3, y = 2,023 lb/yd 3, v = not authorized 20 R 956 Litronic

Lift Capacities with Semi-Gooseneck Boom 26 3 and Heavy Counterweight Stick 7 9 Underft in carriage 40 HD 10 ft 15 ft 20 ft 25 ft 30 ft 35 ft ft in Stick 9 6 Underft in carriage 40 HD 10 ft 15 ft 20 ft 25 ft 30 ft 35 ft ft in 30,8* 30,8* 27,4* 27,4* 15 7 35 HD 33,2* 33,2* 27,0* 27,0* 20 11 35 HD 30,8* 30,8* 20,1* 20,1* 23 10 30 HD 32,1* 32,1* 27,4 28,0* 22,8* 22,8* 26 6 30 HD 30,4* 30,4* 26,5* 26,5* 17,4* 17,4* 28 10 25 HD 42,9* 42,9* 33,4* 33,4* 27,0 28,0* 19,9 24,6* 19,6 20,8* 30 2 25 HD 32,7* 32,7* 31,8* 31,8* 26,8* 26,8* 20,2 23,7* 16,0* 16,0* 32 4 20 HD 35,9 35,9* 25,9 29,0* 19,6 24,7* 16,9 19,8* 32 8 20 HD 34,5* 34,5* 26,2 28,0* 19,7 23,9* 15,3* 15,3* 34 7 15 HD 32,8 38,6* 24,5 30,1* 18,9 25,0* 15,4 19,5* 34 4 15 HD 33,7 37,5* 24,8 29,4* 19,0 24,5* 14,9 21,0* 14,2 15,1* 36 1 10 HD 23,2 30,6* 18,2 25,1* 14,7 20,4* 14,7 19,6* 35 10 HD 31,2 37,9* 23,4 30,3* 18,2 24,8* 14,6 20,8* 13,5 15,2* 36 10 5 HD 22,4 29,9* 17,7 24,5* 14,5 19,5* 14,5 19,4* 35 5 HD 28,1* 28,1* 22,4 30,1* 17,6 24,5* 14,3 20,1* 13,4 15,6* 36 10 0 HD 29,3* 29,3* 22,1 27,9* 17,5 22,9* 14,9 18,0* 34 4 0 HD 29,8 34,5* 21,9 28,6* 17,3 23,3* 14,2 18,5* 13,7 16,5* 36 1 5 HD 27,5* 27,5* 22,2 24,4* 17,6 19,8* 16,0* 16,0* 32 8 5 HD 30,0 30,1* 21,9 25,7* 17,2 20,9* 14,6 15,3* 34 7 10 HD 21,5* 21,5* 19,2* 19,2* 13,5* 13,5* 12,9* 12,9* 30 2 10 HD 24,4* 24,4* 21,1* 21,1* 16,5* 16,5* 12,8* 12,8* 32 2 15 HD 15 HD 14,0* 14,0* 11,3* 11,3* 27 6 20 HD 20 HD Stick 12 6 Underft in carriage 40 HD 35 HD 30 HD 25 HD 20 HD 15 HD 10 HD 5 HD 0 HD 5 HD 10 HD 15 HD 10 ft 15 ft 20 ft 25 ft 30 ft 35 ft ft in 22,7* 22,7* 16,7* 16,7* 21 10 22,2* 22,2* 13,5* 13,5* 28 1 23,4* 23,4* 20,7* 20,7* 12,0* 12,0* 32 6 23,2* 23,2* 24,6* 24,6* 20,8 22,2* 15,0* 15,0* 11,2* 11,2* 35 6 35,1* 35,1* 31,0* 31,0* 26,4* 26,4* 20,2 22,8* 15,5 20,2* 10,8* 10,8* 37 8 35,2 35,4* 25,4 28,1* 19,3 23,6* 15,1 20,4* 10,6* 10,6* 39 32,4 38,1* 23,9 29,5* 18,5 24,2* 14,6 20,5* 10,7* 10,7* 39 8 30,6 38,7* 22,7 30,1* 17,7 24,4* 14,2 20,4* 10,9* 10,9* 39 8 29,7 37,0* 22,0 29,4* 17,2 23,9* 13,9 19,5* 11,5* 11,5* 39 22,8* 22,8* 29,6 33,6* 21,7 27,4* 16,9 22,2* 13,8 17,7* 12,4* 12,4* 37 8 32,2* 32,2* 28,6* 28,6* 21,8 23,8* 17,0 19,2* 13,6* 13,6* 12,5* 12,5* 35 6 23,5* 23,5* 21,9* 21,9* 18,4* 18,4* 13,7* 13,7* 9,7* 9,7* 32 6 20 HD Height Can be slewed though 360 In longitudinal position of undercarriage Max. reach * Limited by hydr. capacity The load values are quoted in lb x 1,000 at stick end (without bucket), and may be swung 360 on firm and even ground. Adjacent values are valid for the undercarriage when in the longitudinal position. Capacities are valid for 30 wide triple grouser pads. Indicated loads are based on ISO 10567 standard and do not exceed 75 % of tipping or 87 % of hydraulic capacity (indicated via *). Without bucket cylinder, link and lever the lift capacities will increase by 1,765 lb. Lifting capacity of the excavator is limited by machine stability and hydraulic capacity. R 956 Litronic 21

Backhoe Bucket with Gooseneck Boom 30 2 and Heavy Counterweight ft 50 45 40 35 30 25 20 15 10 5 0-5 -10-15 -20-25 -30-35 -40-45 m R0140 15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0-1 -2-3 -4-5 -6-7 -8-9 1-10 2-11 3-12 -13 4-14 18 17 16 15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0 m 60 55 50 45 40 35 30 25 20 15 10 5 0 ft Digging Envelope 1 2 3* 4* Stick length ft in 9 6 12 6 16 5 21 4 Max. digging depth ft in 31 10 34 9 38 1 42 10 Max. reach at ground level ft in 46 3 49 3 52 2 55 9 Max. dump height ft in 31 4 32 12 35 3 34 5 Max. teeth height ft in 43 2 44 10 45 11 44 9 Digging Forces 1 2 3* 4* Digging force ISO lbf 48,785 40,690 33,720 27,200 lb 48,720 41,005 33,730 27,115 Breakout force ISO lbf 70,365 70,365 53,055 53,055 lb 70,325 70,325 53,130 53,130 * with bucket R 946 litronic` Operating Weight and Ground Pressure Operating weight includes basic machine with heavy counterweight (24,250 lb), gooseneck boom 30 2, stick 16 5 and bucket 2.30 yd 3. Undercarriage Pad width in 20 24 30 Weight lb 117,945 119,160 120,925 Ground pressure psi 15.6 13.1 10.7 HD Buckets Machine stability per ISO 10567* (75% of tipping capacity) HD-Undercarriage Cutting width Capacity ISO 7451 Weight in yd 3 lb Stick length (m) 9 6 12 6 16 5 21 4 53 2.16 4,630 X Y v v 61 2.62 4,960 Y V v v 69 3.07 5,510 V y v v 47 1.63 2865 v v X Y 53 1.96 3085 v v X V 59 2.30 3305 v v Y y 65 2.62 3525 v v V v * Indicated loads are based on ISO 10567 max. stick length, lifted 360 on firm 1) Standard bucket with Liebherr teeth Z 70 (appropriate for materials up to classification 5, according to VOB, Section C, DIN 18300) 2) Standard bucket from R 946 litronic` with Liebherr teeth Z 50 Other backhoes available on request Max. material weight X = 3,708 lb/yd 3, Y = 3,034 lb/yd 3, V = 2,528 lb/yd 3, y = 2,023 lb/yd 3, v = not authorized STD 1) STD 2) 22 R 956 Litronic

Lift Capacities with Gooseneck Boom 30 2 and Heavy Counterweight Stick 9 6 5 ft 10 ft 15 ft 20 ft 25 ft 30 ft 35 ft 40 ft 45 ft 50 ft Underft in carriage ft in 40 HD 35 HD 16,9* 16,9* 29 4 30 HD 16,1* 16,1* 16,1* 16,1* 33 6 25 HD 18,6* 18,6* 16,7* 16,7* 15,5 15,8* 14,2 15,4* 36 6 20 HD 26,9* 26,9* 20,9* 20,9* 17,9* 17,9* 15,1 16,2* 12,7 15,1* 38 6 15 HD 23,2 23,5* 18,2 19,3* 14,5 17,0* 11,7 15,1* 39 11 10 HD 21,6 26,0* 17,2 20,8* 13,9 17,8* 11,3 16,1* 11,1 15,4* 40 6 5 HD 20,6 27,4* 16,4 21,9* 13,4 18,6* 11,1 16,4* 10,9 16,0* 40 6 0 HD 20,3 27,9* 16,0 22,6* 13,1 19,0* 11,0 16,5* 39 11 5 HD 24,3* 24,3* 20,2 27,6* 15,8 22,6* 13,0 19,0* 11,6 16,8* 38 6 10 HD 22,7* 22,7* 28,6 32,0* 20,5 26,5* 15,9 21,9* 13,1 18,2* 12,6 17,0* 36 6 15 HD 34,1* 34,1* 29,2 29,4* 21,0 24,5* 16,4 20,2* 14,5 17,0* 33 6 20 HD 29,6* 29,6* 25,3* 25,3* 20,9* 20,9* 16,4* 16,4* 29 4 25 HD 30 HD 35 HD 18,0* 18,0* 14,6* 14,6* 23 1 Stick 12 6 5 ft 10 ft 15 ft 20 ft 25 ft 30 ft 35 ft 40 ft 45 ft 50 ft Underft in carriage ft in 40 HD 35 HD 12,2* 12,2* 33 2 30 HD 14,0* 14,0* 11,3* 11,3* 36 11 25 HD 15,1* 15,1* 14,2* 14,2* 10,8* 10,8* 39 7 20 HD 23,4* 23,4* 18,9* 18,9* 16,4* 16,4* 14,9* 14,9* 12,1 14,1* 10,6* 10,6* 41 6 15 HD 28,8* 28,8* 21,6* 21,6* 18,0* 18,0* 14,7 15,8* 11,8 14,6* 10,4 10,6* 42 10 10 HD 22,3 24,3* 17,5 19,6* 14,0 16,9* 11,4 15,1* 9,9 10,8* 43 5 5 HD 21,0 26,3* 16,6 21,0* 13,4 17,8* 11,0 15,7* 9,7 11,2* 43 5 0 HD 18,2* 18,2* 20,3 27,4* 16,0 22,0* 13,0 18,5* 10,7 16,0* 9,8 11,8* 42 10 5 HD 27,5 28,6* 20,0 27,6* 15,6 22,4* 12,7 18,8* 10,6 16,0* 10,2 12,7* 41 6 10 HD 24,2* 24,2* 27,8 33,8* 20,1 27,1* 15,6 22,2* 12,7 18,5* 11,0 14,2* 39 7 15 HD 29,3* 29,3* 38,6* 38,6* 28,4 31,6* 20,4 25,7* 15,8 21,1* 13,0 17,3* 12,3 15,6* 36 11 20 HD 43,4* 43,4* 34,8* 34,8* 28,3* 28,3* 21,1 23,1* 16,5 18,7* 14,7 15,5* 33 2 25 HD 30 HD 35 HD 27,9* 27,9* 22,9* 22,9* 18,2* 18,2* 14,7* 14,7* 28 Height Can be slewed though 360 In longitudinal position of undercarriage Max. reach * Limited by hydr. capacity The load values are quoted in lb x 1,000 at stick end (without bucket), and may be swung 360 on firm and even ground. Adjacent values are valid for the undercarriage when in the longitudinal position. Capacities are valid for 30 wide triple grouser pads. Indicated loads are based on ISO 10567 standard and do not exceed 75 % of tipping or 87 % of hydraulic capacity (indicated via *). Without bucket cylinder, link and lever the lift capacities will increase by 1,765 lb/1,325 lb*. Lifting capacity of the excavator is limited by machine stability and hydraulic capacity. * just for stick 16 5 and 21 4 R 956 Litronic 23

Lift Capacities with Gooseneck Boom 30 2 and Heavy Counterweight Stick 16 5 5 ft 10 ft 15 ft 20 ft 25 ft 30 ft 35 ft 40 ft 45 ft 50 ft Underft in carriage ft in 40 HD 9,1* 9,1* 33 5 35 HD 12,5* 12,5* 8,4* 8,4* 37 10 30 HD 12,4* 12,4* 11,2* 11,2* 7,9* 7,9* 41 1 25 HD 12,9* 12,9* 12,6* 12,6* 7,7* 7,7* 43 6 20 HD 15,0* 15,0* 13,8* 13,8* 13,0 13,1* 8,8* 8,8* 7,6* 7,6* 45 4 15 HD 24,9* 24,9* 19,6* 19,6* 16,7* 16,7* 14,9* 14,9* 12,6 13,7* 10,1 12,7* 7,6* 7,6* 46 5 10 HD 30,0* 30,0* 22,6* 22,6* 18,6* 18,6* 14,9 16,1* 12,1 14,5* 9,9 13,5* 7,8* 7,8* 47 5 HD 28,6* 28,6* 22,4 25,1* 17,6 20,3* 14,2 17,3* 11,6 15,3* 9,6 13,9* 8,0* 8,0* 47 0 HD 27,3* 27,3* 21,2 26,9* 16,7 21,6* 13,6 18,2* 11,2 15,9* 9,4 14,2* 8,5* 8,5* 46 5 5 HD 16,1* 16,1* 27,9 31,6* 20,6 27,9* 16,2 22,5* 13,2 18,9* 10,9 16,3* 9,3 10,8* 9,1* 9,1* 45 4 10 HD 17,1* 17,1* 23,9* 23,9* 27,9 35,8* 20,4 28,0* 15,9 22,8* 13,0 19,1* 10,8 16,3* 9,8 10,1* 43 6 15 HD 22,2* 22,2* 25,1* 25,1* 33,0* 33,0* 28,2 34,4* 20,4 27,3* 15,9 22,4* 13,0 18,7* 11,0 15,5* 10,7 11,5* 41 1 20 HD 29,7* 29,7* 34,3* 34,3* 41,1* 41,1* 28,8 32,0* 20,8 25,7* 16,2 21,1* 13,3 17,3* 12,2 13,7* 37 10 25 HD 45,7* 45,7* 35,7* 35,7* 28,2* 28,2* 21,6 22,7* 16,9 18,2* 14,9* 14,9* 33 5 30 HD 35 HD 27,4* 27,4* 21,8* 21,8* 16,9* 16,9* 14,2* 14,2* 27 4 Stick 21 4 5 ft 10 ft 15 ft 20 ft 25 ft 30 ft 35 ft 40 ft 45 ft 50 ft Underft in carriage ft in 40 HD 5,3* 5,3* 38 5 35 HD 8,1* 8,1* 5,0* 5,0* 42 2 30 HD 9,6* 9,6* 5,2* 5,2* 4,8* 4,8* 45 2 25 HD 9,9* 9,9* 8,5* 8,5* 4,7* 4,7* 47 5 20 HD 10,5* 10,5* 10,2* 10,2* 4,7* 4,7* 49 15 HD 12,1* 12,1* 11,3* 11,3* 10,0 10,7* 5,0* 5,0* 4,8* 4,8* 50 1 10 HD 34,4* 34,4* 23,5* 23,5* 18,3* 18,3* 15,3* 15,3* 13,4* 13,4* 11,9 12,2* 9,6 11,3* 6,4* 6,4* 5,0* 5,0* 50 7 5 HD 20,8* 20,8* 28,2* 28,2* 21,2* 21,2* 17,3* 17,3* 13,9 14,8* 11,2 13,1* 9,1 11,9* 6,7* 6,7* 5,3* 5,3* 50 7 0 HD 8,6* 8,6* 18,7* 18,7* 28,3 31,6* 21,0 23,6* 16,4 18,9* 13,1 15,9* 10,7 13,9* 8,8 12,5* 5,8* 5,8* 5,6* 5,6* 50 1 5 HD 10,9* 10,9* 13,2* 13,2* 21,1* 21,1* 26,9 33,5* 19,9 25,3* 15,5 20,2* 12,5 16,9* 10,2 14,6* 8,5 12,9* 6,2* 6,2* 49 10 HD 15,2* 15,2* 18,0* 18,0* 25,3* 25,3* 26,2 34,3* 19,2 26,2* 14,9 21,1* 12,0 17,5* 9,9 15,0* 8,3 13,1* 6,9* 6,9* 47 5 15 HD 19,7* 19,7* 23,1* 23,1* 30,7* 30,7* 26,1 34,1* 18,9 26,4* 14,7 21,3* 11,8 17,7* 9,8 15,1* 8,3 8,7* 8,0* 8,0* 45 2 20 HD 24,6* 24,6* 28,9* 28,9* 37,4* 37,4* 26,4 32,9* 19,0 25,8* 14,7 20,9* 11,9 17,4* 9,9 14,5* 9,3 9,7* 42 2 25 HD 30,1* 30,1* 35,5* 35,5* 40,4* 40,4* 27,1 30,6* 19,5 24,2* 15,0 19,7* 12,2 16,1* 10,9 12,5* 38 5 30 HD 36,3* 36,3* 43,7* 43,7* 34,8* 34,8* 26,7* 26,7* 20,3 21,2* 15,8 16,9* 13,9 14,2* 33 4 35 HD 26,1* 26,1* 20,2* 20,2* 15,5* 15,5* 14,3* 14,3* 26 2 Height Can be slewed though 360 In longitudinal position of undercarriage Max. reach * Limited by hydr. capacity The load values are quoted in lb x 1,000 at stick end (without bucket), and may be swung 360 on firm and even ground. Adjacent values are valid for the undercarriage when in the longitudinal position. Capacities are valid for 30 wide triple grouser pads. Indicated loads are based on ISO 10567 standard and do not exceed 75 % of tipping or 87 % of hydraulic capacity (indicated via *). Without bucket cylinder, link and lever the lift capacities will increase by 1,765 lb/1,325 lb*. Lifting capacity of the excavator is limited by machine stability and hydraulic capacity. * just for stick 16 5 and 21 4 24 R 956 Litronic

Standard Equipment Undercarriage Lashing eyelets Lifetime-lubricated track rollers Track guide at each track frame (three pieces) Tracks sealed and greased Uppercarriage Engine hood with lift help Extended tool kit Fuel tank cap, lockable Handrails, non slip surfaces Heavy counterweight Liebherr full-automatic central lubrication system (except connecting link for bucket kinematics) Maintenance-free swing brake lock Sound insulation Toolbox lockable Hydraulics Filter with integrated fine filter area Hydraulic tank shut-off valve and pumps Liebherr hydraulic oil Pressure storage for controlled lowering of equipment with engine turned off Pressure test ports for hydraulic Stepless work mode selector Engine After-cooled Common-Rail system injection Conform with Tier 4i emission standard Fuel filter and water separator Liebherr particle filter Sensor-controlled automatic engine idling Turbo charger Operator s Cab 7 color multifunction display with touchscreen All tinted windows Automatic air conditioning Cigarette lighter and ashtray Coat hook Completely retractable windscreen Cup holder Dome light Door with sliding windows Emergency exit rear window Front windscreen (bottom) retractable Fuel consumption indicator Headlights (two pieces, Halogen) Hydro mounts LiDAT Plus (enhanced Liebherr data transfer system) * Mechanical hour meters, readable from outside the cab Operator seat Liebherr-Comfort Preparation for radio installation Rain hood over front window opening Rear space monitoring with camera Roll-down sun blind Rubber floor mat ROPS safety cab structure (capable of sweeping over) Seat belt Storage bin Storage space Sunroof, right window and windshield with safety glass Travel alarm system Wiper/washer Attachment Headlights on boom (right and left, halogen) Overload warning device Safety check valves hoist cylinder Safety check valves stick cylinder * optionally extendable after one year R 956 Litronic 25

Individual Options Undercarriage Protection plate for wrecking ball operation Reinforced cover plate and base plate for centre section Track guide at each track frame (four pieces) Uppercarriage Customized colors Hydraulic for removable counterweight Refuelling pump (electrical) Removable counterweight (26,455 lb counterweight, 23,148 lb mechanical removable) Reversible fan drive Rock protection (swing gear and lubrication pipes) Hydraulics Bypass filter Liebherr hydraulic oil, biodegradable Liebherr hydraulic oil, specially for warm and cold regions Engine Air pre-filter with dust trap Automatic engine shut-down (adjustable time-period) Fuel pre-heating system Operator s Cab Additional headlights front or/and rear (Halogen or Xenon) Amber beacon Auxiliary heater with weekly timer Electric cool box (12 V) Electronic drive away lock Engine shut-down (emergency stop) in cab FGPS front guard Fire extinguisher Footrest FOPS top guard Headlights (two pieces, Xenon) Impact resistant front window (one piece, fixed installation can not be opened) Impact resistant front window (two pieces, fixed installation can not be opened) Impact resistant glass panel in roof Operator seat Liebherr-Premium Proportional controls Liebherr Radio Comfort Roof wiper Sun visor Attachment Bottom boom protection for mono boom or stick Headlights on boom (Xenon) High pressure circuit Hydraulic or mechanical quick coupler Liebherr automatic lubrication system for connecting link for bucket kinematics Liebherr line of buckets Liebherr tooth system LIKUFIX Middle pressure circuit Piston rod guard for bucket cylinder Piston rod guard for hoist cylinders Security for hoist cylinder in grab or hammer operation Straight mono boom Tool Control Options and/or special attachments, supplied by vendors other than Liebherr, are only to be installed with the knowledge and approval of Liebherr in order to retain warranty. Printed in Germany by Typodruck RG-BK-RP LFR/SP 11213551-0.5-01.14_enUS All illustrations and data may differ from standard equipment. Subject to change without notice. All indicated loads are based in accordance with ISO 9248. Liebherr Construction Equipment Co. 4100 Chestnut Avenue, Newport News, VA 23607, USA +1 (757) 245 5251, Fax +1 (757) 928 8701 www.liebherr.us, E-Mail: info.lce@liebherr.com www.facebook.com/liebherrconstruction