Crawler excavator R 966

Transcription

1 Crawler excavator R 966 Operating Weight with Backhoe Attachment: 66, 76,3 kg Operating Weight with Shovel Attachment: 68, 69,2 kg Engine Output: 32 kw / 43 P Bucket Capacity: 1.. m³ Shovel Capacity: m³ Emission standard: Stage IIIB / Tier 4i

2 Equipment Cast steel elements Greater resistance to stresses onger service life Safety check valves for stick and boom cylinders with integrated regeneration for less fuel consumption Tools Different levels of protection to suit the different areas of application New iebherr Z-type tooth system 2 R 966 itronic Stage IIIB

3 Operator s cab New comfortable and ergonomic design 7 high definition colour touch screen Wider than the cab in the small excavators range Bullet-proof panels at the front and in the roof as standard Optional FOPS and FGPS protective guards Accessibility Maintenance platform in the engine compartment Broad, anti-slip side catwalks as standard Newly designed undercarriage steps for a longer service life Undercarriage Robust structure thanks to the more rigid profile Improved self-cleaning capacity Molded two-tooth sprocket for a longer service life Two types of undercarriage available: an fixed-track gauge and C-V variable-track gauge R 966 itronic Stage IIIB 3

4 Equipment Cast steel parts Parallel kinematics for powerful and regular digging Bucket cylinders positioned under the equipment for better protection against the elements Safety valves on boom cylinder for pipe burst protection Buckets The front shovel is the perfect shape for digging deep into the material and for a high filling rate Several levels of protection for the front shovel, depending on requirements 4 R 966 itronic Stage IIIB

5 Operator s cab New comfortable and ergonomic design 7 high-resolution colour touch screen Wider than the cab in the small excavators range Bullet-proof panels at the front and in the roof as standard Optional FOPS and FGPS protection guards Operator s cab with a fixed riser for a full view over the work area R 966 itronic Stage IIIB

6 Technical Data Engine Rating per ISO kw (43 P) at 1,8 RPM Model iebherr D 98 A7 SCR Type 8 cylinder V engine Bore/Stroke 128/17 mm Displacement l Engine operation 4-stroke diesel Common-Rail Exhaust gas treatment SCR system (Selective Catalytic Reduction) emission standard stage IIIB / Tier 4i Cooling water-cooled and integrated motor oil cooler, after-cooled and fuel cooled Air cleaner dry-type air cleaner with pre-cleaner, primary and safety elements Fuel tank 1,14 l Urea tank 14 l Electrical system Voltage 24 V Batteries 2 x 18 Ah/12 V Starter 24 V/7.8 kw Alternator three phase current 28 V/1 A Engine idling sensor-controlled Motor management connection to the integrated excavator system controlling via CAN-BUS to the economical utilisation of the service that is available ydraulic System ydraulic pump for attachment and travel drive two iebherr variable flow, swash plate pumps Max. flow 2 x 41 l/min. Max. pressure 3 bar Pump regulation electro-hydraulic with electronic engine speed sensing regulation, pressure compensation, flow compensation, automatic oil flow optimizer ydraulic pump for swing drive reversible, variable flow, swash plate pump, closed-loop circuit Max. flow 24 l/min. Max. pressure 34 bar ydraulic tank 43 l ydraulic system 92 l ydraulic oil filter 2 full flow filters in return line with integrated fine filter area ( µm) ydraulic oil cooler compact cooler for water cooler, after-cooler, fuel cooler and transmission pump oil, sandwiched with cooler for oil and condenser of air-conditioning with hydrostatically controlled fan drives MODE selection adjustment of engine and hydraulic performance via a mode pre-selector to match application for especially economical and environmentally friendly operation or for maximum digging performance and heavy-duty jobs RPM adjustment stepless adjustment of engine output via RPM at each selected mode Tool Control 1 preadjustable pump flows and pressures for add-on tools ydraulic Controls Power distribution via control valves in single block with integrated safety valves Flow summation to boom and stick Closed-loop circuit for uppercarriage swing drive Servo circuit electro-hydraulic control Attachment and swing proportional via joystick levers Travel proportional via foot pedals or removable hand levers speed pre-selection Additional functions via foot pedals or joystick toggle switch Swing Drive Drive by iebherr swash plate motor with integrated brake valves Transmission iebherr compact planetary reduction gear Swing ring iebherr, sealed single race ball bearing swing ring, internal teeth Swing speed.6 RPM stepless Swing torque 233 knm olding brake wet multi-disc (spring applied, pressure released) Operator s Cab Cab work headlights integrated in the ceiling, a door with a side window (can be opened on both sides), large stowing and depositing possibilities, shock-absorbing suspension, sounddamping insulating, tinted laminated safety glass, separate window shades for the sunroof window and windscreen, 12 V plug, storage bins, lunchbox, cup holder Operator s seat iebherr-comfort seat, airsprung with automatic weight adjustment, vertical and horizontal seat damping including consoles and joysticks. Seat and armrests adjustable separately and in combination, seat heating as standard Control system arm consoles, swinging with the seat Operation and displays large high resolution colour display with selfexplanatory operation via touch screen, video, versatile adjusting, control and monitoring facilities, e.g. climate control, implement and tool parameters Air-conditioning standard automatic air-conditioning, ambient air function, fast de-icing and demisting at the press of a button, air vents can be operated via a menu; ambient air and fresh air filters can be easily replaced and are accessible from the outside; heating- cooling unit, designed for extreme outside temperatures, sensors for solar radiation, inside and outside temperatures Noise emission ISO 6396 pa (inside cab) = 7 db(a) 2/14/EC WA (surround noise) = 18 db(a) Undercarriage Version gauge 3,3 mm C-V gauge 3,39 mm Drive iebherr swash plate motors with integrated brake valves on both sides Transmission iebherr planetary reduction gears Travel speed low range 3. km/h high range 4.1 km/h Net drawbar pull on crawler 478 kn Track components D 8 K, maintenance-free Track rollers/carrier rollers : 9/2 C-V: 9/3 Tracks sealed and greased Track pads double grouser Digging locks wet multi-discs (spring applied, pressure released) Brake valves outside the travel motor ashing eyes integrated Attachment Type combination of resistant steel plates and cast steel components ydraulic cylinders iebherr cylinders with special seal-system, shock protection Pivots sealed, low maintenance ubrication automatic central lubrication system (except link and tilt geometry) ydraulic connections pipes and hoses equipped with SAE split-flange connections Bucket standard equipped with iebherr tooth system 6 R 966 itronic Stage IIIB

7 Dimensions E D A2 A1 A W C K Q P X V U Z N S B G R6.1 mm C-V mm A 3,1 3,1 A1 4,16 4,16 A2 4,42 4,42 C 3,1/3,71* 3,67/3,86* D 4,13 4,13 E 4,27 4,27 3,43 3,9 K 1,43 1,8 4,7 4,69 P 1,31 1,38 Q S 3,3 2,73**/3,39 U,69,77 N B 3,91 3,91 4, 3,36** 3,36** 3,48** G 4,29 4,29 4,29 3,78** 3,78** 3,78** Z 6,98 7,2 * with FOPS top guard ** transport position -Undercarriage Stick Mono Mono Mono length boom boom boom 7. m 8.2 m 1. m m mm mm mm V 2.6 8, 3. 6,1 8,9 1, , 8, 1, ,* 7,6 9,6. 6, 8, W 2.6 3,9 3. 4, 4, 4, 3.4 4,2 4,1 4, 4.2 3,8* 4,2 4,6. 4,1 4,6 X , ,7 14, 1, ,8 14,1 1, ,7* 14,1 1,8. 14,1 1,8 C-V-Undercarriage Stick Mono Mono Mono length boom boom boom 7. m 8.2 m 1. m m mm mm mm V 2.6 7,9 3. 7,6 8,8 1, , 8,4 1, ,* 7,6 9,. 6,4 8, W 2.6 3,9 3. 4, 4,1 4, 3.4 4,2 4,2 4, ,8* 4,2 4,7. 4,1 4,7 X , ,7 13,9 1, ,8 14,1 1, ,7* 14,1 1,8. 14, 1,8 * without bucket R 966 itronic Stage IIIB 7

8 Backhoe Bucket with Mono Boom 7. m ft m R7.1 Digging Envelope Stick length m Max. digging depth m Max. reach at ground level m Max. dumping height m Max. teeth height m Digging force ISO kn t Breakout force ISO kn t Operating Weight and Ground Pressure The operating weight includes the basic machine with mono boom 7. m, stick 2.6 m and bucket 4. m 3 (3,6 kg). Undercarriage C-V m Pad width mm Weight kg 66, 66,7 67,7 69,7 7,4 71, Ground pressure kg/cm ft Buckets Machine stability per ISO 167* (7% of tipping capacity) -Undercarriage STD 1) 2) V 3) Cutting width Capacity ISO 741 Weight C-V-Undercarriage Stick length (m) Stick length (m) mm m 3 kg 1, 2. 2,9 X X X Y X X X Y 1,7 3. 3,1 X X Y V X X Y V 1,9 3. 3,4 X Y V y X Y V y 2,1 4. 3,6 Y Y V y X Y V y 2,4 4. 3,9 Y V y v Y V y v 2,6. 4,2 V y v v Y y v v 1,6 2. 3, X X X X X X X X 1,8 2. 3,8 X X X Y X X X Y 2, 3. 4,1 X X Y V X X Y V 2,1 3. 4,4 X Y V y X Y V y 2,1 4. 4,6 Y V y v Y V y v 2,3 4., V y v v Y y v v 2,.,3 y v v v V v v v 1,9 3. 4,6 X Y V y X Y V y 2,1 3., Y V y v X V y v 2,1 4.,2 Y y v v Y y v v 2,1 4.,4 V v v v V v v v * Indicated loads are based on ISO 167 max. stick length, lifted 36 on firm 1) Standard bucket with teeth Z 7 2) bucket with teeth Z 9 3) V bucket with teeth Z 9 Other backhoes available on request Max. material weight X = 2.2 t/m 3, Y = 1.8 t/m 3, V = 1. t/m 3, y = 1.2 t/m 3, v = not authorized 8 R 966 itronic Stage IIIB

9 ift Capacities with Mono Boom 7. m Stick 2.6 m 3. m 4. m 6. m 7. m 9. m 1. m 12. m 13. m 1. m Underm carriage m 12. C-V 1. C-V 1.1* 1.1* 9. C-V 1.* 1.* * 14.8* 9.4* 9.4* 7. C-V 14.9* 14.9* 9.4* 9.4* * 23.2* 18.1* 18.1* 1.6* 1.6* 11.8* 11.8* 9.2* 9.2* 6. C-V 23.9* 23.9* 18.4* 18.4* 1.7* 1.7* 13.2* 13.2* 9.2* 9.2* * 2.9* * * 9.3* 9.3* 4. C-V 21.2* 21.2* 17.1* 17.1* * 9.3* 9.3* * * * 9.7* 9.7* 3. C-V * * * 9.8* 9.8* * * * * 1. C-V * * * 1.* 1.* * 21.8* * * * * C-V 23.6* 23.6* * * * 11.8* 11.8* * 23.2* 29.9* 29.9* * * * 1. C-V 2.* 2.* 29.6* 29.6* * * * * 31.* 26.4* 26.4* * * * 3. C-V 3.* 3.* 2.9* 2.9* 2.8* 2.8* 16.2* 16.2* 14.9* 14.9* * 2.4* 16.1* 16.1* 13.9* 13.9* 4. C-V 19.* 19.* 1.3* 1.3* 13.6* 13.6* C-V 7. C-V 9. C-V 1. C-V Stick 3. m 3. m 4. m 6. m 7. m 9. m 1. m 12. m 13. m 1. m Underm carriage m 12. C-V 1. C-V 1.* 1.* 8.3* 8.3* 9. C-V 12.1* 12.1* 8.2* 8.2* * 14.* 7.8* 7.8* 7. C-V 14.1* 14.1* 7.8* 7.8* * 17.1* 14.9* 14.9* * 7.6* 7.6* 6. C-V 17.4* 17.4* 1.* 1.* 13.7* 13.7* 7.6* 7.6* * 28.2* 19.9* 19.9* 16.3* 16.3* * 7.7* 7.7* 4. C-V 29.* 29.* 2.2* 2.2* 16.4* 16.4* * 7.7* 7.7* * * * 8.* 8.* 3. C-V 23.* 23.* * * 8.1* 8.1* * * * 8.6* 8.6* 1. C-V * * * 8.7* 8.7* * 24.* * * * 9.6* 9.6* C-V 2.1* 2.1* * * * 9.7* 9.7* * 22.4* 31.3* 31.3* * * * * 1. C-V 23.7* 23.7* 31.* 31.* * * * 11.4* 11.4* * 34.9* 27.9* 27.9* * * * 3. C-V 34.6* 34.6* 27.* 27.* 21.6* 21.6* * * * 27.7* 22.* 22.* 17.7* 17.7* 13.8* 13.8* 4. C-V 21.7* 21.7* 17.1* 17.1* 13.7* 13.7* C-V 7. C-V 9. C-V 1. C-V eight Can be slewed through 36 In longitudinal position of undercarriage Max. reach * imited by hydr. capacity The load values are quoted in tons (t) at stick end (without bucket), and may be swung 36 on firm and even ground. Adjacent values are valid for the undercarriage when in the longitudinal position. Capacities are valid for 6 mm wide double grouser pads. Indicated loads are based on ISO 167 standard and do not exceed 7 % of tipping or 87 % of hydraulic capacity (indicated via *). Without bucket cylinder, link and lever the lift capacities will increase by 1,1 kg. ifting capacity of the excavator is limited by machine stability and hydraulic capacity. According to European Standard, EN 474-: In the European Union excavators have to be equipped with an overload warning device, a load diagram and automatic safety check valves on hoist cylinders and stick cylinder(s), when they are used for lifting operations which require the use of lifting accessories. R 966 itronic Stage IIIB 9

10 ift Capacities with Mono Boom 7. m Stick 3.4 m 3. m 4. m 6. m 7. m 9. m 1. m 12. m 13. m 1. m Underm carriage m 12. C-V 1. C-V 12.6* 12.6* 7.* 7.* 9. C-V 13.1* 13.1* 7.* 7.* 13.2* 13.2* 9.2* 9.2* 6.6* 6.6* 7. C-V 13.3* 13.3* 1.2* 1.2* 6.6* 6.6* 14.2* 14.2* * 6.* 6.* 6. C-V 16.4* 16.4* 14.3* 14.3* 13.1* 13.1* 6.* 6.* 26.1* 26.1* 19.* 19.* 1.6* 1.6* * 6.* 6.* 4. C-V 26.8* 26.8* 19.3* 19.3* 1.8* 1.8* * 6.6* 6.6* 23.3* 23.3* * * * 7.2* 7.2* 6.8* 6.8* 3. C-V 21.8* 21.8* 22.2* 22.2* * * 7.4* 7.4* 6.8* 6.8* 19.1* 19.1* * * * 7.2* 7.2* 1. C-V 19.* 19.* * * * 7.3* 7.3* * 2.* * * * 8.* 8.* C-V 2.8* 2.8* * * * 8.1* 8.1* * 21.3* * * * * 9.3* 9.3* 1. C-V 22.4* 22.4* 32.* 32.* * * * 9.4* 9.4* 31.6* 31.6* 29.3* 29.3* * * * 3. C-V 32.7* 32.7* 28.9* 28.9* * * 11.9* 11.9* 31.6* 31.6* 24.4* 24.4* 19.1* 19.1* 14.3* 14.3* 13.6* 13.6* 4. C-V 3.6* 3.6* 23.7* 23.7* 18.* 18.* 13.6* 13.6* 13.* 13.* C-V 7. C-V 9. C-V 1. C-V Stick 4.2 m 3. m 4. m 6. m 7. m 9. m 1. m 12. m 13. m 1. m Underm carriage m 12. C-V 1. C-V 9. C-V 7. C-V 6. C-V 4. C-V 3. C-V 1. C-V C-V 1. C-V 3. C-V 4. C-V 6. C-V 7. C-V 9. C-V 1. C-V.7*.7*.6*.6* 6.1* 6.1*.1*.1* 7.* 7.*.1*.1* 11.3* 11.3* 4.8* 4.8* 11.4* 11.4* 4.8* 4.8* 12.7* 12.7* 11.8* 11.8* 6.8* 6.8* 4.7* 4.7* 12.8* 12.8* 11.9* 11.9* 7.3* 7.3* 4.7* 4.7* 16.9* 16.9* 14.2* 14.2* * * 4.8* 4.8* 22.9* 22.9* 17.3* 17.3* 14.4* 14.4* 12.8* 12.8* * 4.8* 4.8* 28.8* 28.8* 2.1* 2.1* * * *.*.* 29.4* 29.4* 2.4* 2.4* 16.2* 16.2* * *.*.* 26.2* 26.2* * * * *.3* 2.8* 2.8* * * * *.3*.3* 12.* 12.* 26.4* 26.4* * * * *.8* 13.2* 13.2* 26.8* 26.8* * * * *.8*.8* 19.3* 19.3* * * * * 6.8* 6.8* 6.6* 6.6* 2.* 2.* 32.6* 32.6* * * * 6.7* 6.7* 26.7* 26.7* * * * * 7.9* 7.9* 27.* 27.* 31.1* 31.1* * * * 8.1* 8.1* 3.7* 3.7* 27.* 27.* * * 1.* 1.* 36.8* 36.8* 27.* 27.* 2.6* 2.6* * 1.9* 1.9* 28.1* 28.1* 21.1* 21.1* 16.1* 16.1* 12.3* 12.3* 2.2* 2.2* 1.3* 1.3* 12.1* 12.1* eight Can be slewed through 36 In longitudinal position of undercarriage Max. reach * imited by hydr. capacity The load values are quoted in tons (t) at stick end (without bucket), and may be swung 36 on firm and even ground. Adjacent values are valid for the undercarriage when in the longitudinal position. Capacities are valid for 6 mm wide double grouser pads. Indicated loads are based on ISO 167 standard and do not exceed 7 % of tipping or 87 % of hydraulic capacity (indicated via *). Without bucket cylinder, link and lever the lift capacities will increase by 1,1 kg. ifting capacity of the excavator is limited by machine stability and hydraulic capacity. According to European Standard, EN 474-: In the European Union excavators have to be equipped with an overload warning device, a load diagram and automatic safety check valves on hoist cylinders and stick cylinder(s), when they are used for lifting operations which require the use of lifting accessories R 966 itronic Stage IIIB

11 Backhoe Bucket with Mono Boom 8.2 m ft m R m Digging Envelope * Stick length m Max. digging depth m Max. reach at ground level m Max. dumping height m Max. teeth height m Digging force ISO kn t Breakout force ISO kn t * with bucket R 96 litronic` Operating Weight and Ground Pressure The operating weight includes the basic machine with mono boom 8.2 m, stick 3.4 m and bucket 2. m 3 (2,9 kg). Undercarriage C-V Pad width mm Weight kg 66,3 67, 68, 7, 7,7 71,8 Ground pressure kg/cm ft Buckets Machine stability per ISO 167* (7% of tipping capacity) -Undercarriage STD 1) 2) STD 3) Cutting width Capacity ISO 741 Weight C-V-Undercarriage Stick length (m) Stick length (m) mm m 3 kg 1,3 2. 2,7 X X Y v X X X v 1, 2. 2,9 X Y V v X X Y v 1,7 3. 3,1 Y V y v X Y V v 1,9 3. 3,4 V y v v Y V y v 2,1 4. 3,6 y v v v V y v v 1,6 2. 3, X X Y v X X Y v 1,8 2. 3,8 X Y V v X Y V v 2, 3. 4,1 Y V y v Y V y v 2,1 3. 4,4 V y v v V y v v 1, 2. 2,2 v v v Y v v v Y 1, , v v v V v v v V * Indicated loads are based on ISO 167 max. stick length, lifted 36 on firm 1) Standard bucket with teeth Z 7 2) bucket with teeth Z 9 3) Standard bucket from R 96 litronic` with teeth Z 7 Other backhoes available on request Max. material weight X = 2.2 t/m 3, Y = 1.8 t/m 3, V = 1. t/m 3, y = 1.2 t/m 3, v = not authorized R 966 itronic Stage IIIB 11

12 ift Capacities with Mono Boom 8.2 m Stick 3. m 3. m 4. m 6. m 7. m 9. m 1. m 12. m 13. m 1. m Underm carriage m 12. C-V 1. C-V 9. C-V 7. C-V 6. C-V 4. C-V 3. C-V 1. C-V C-V 1. C-V 3. C-V 4. C-V 6. C-V 7. C-V 9. C-V 1. C-V Stick 3.4 m 3. m 4. m 6. m 7. m 9. m 1. m 12. m 13. m 1. m Underm carriage m 12. C-V 1. C-V 9. C-V 7. C-V 6. C-V 4. C-V 3. C-V 1. C-V C-V 1. C-V 3. C-V 4. C-V 6. C-V 7. C-V 9. C-V 1. C-V 8.9* 8.9* 8.8* 8.8* 11.3* 11.3* 8.2* 8.2* 11.3* 11.3* 8.1* 8.1* 12.4* 12.4* 11.4* 11.4* 7.8* 7.8* 12.* 12.* 11.4* 11.4* 7.8* 7.8* 16.8* 16.8* 13.7* 13.7* 12.* 12.* * 7.8* 7.8* 17.1* 17.1* 13.8* 13.8* 12.1* 12.1* * 7.8* 7.8* 19.9* 19.9* 1.2* 1.2* * * 7.9* 7.9* 2.3* 2.3* 1.4* 1.4* * * 7.9* 7.9* * * * * * 2.9* 2.9* * * * 8.2* 8.2* * * * * * * * * * * * * * * * * * * 18.7* 18.7* * * * * 2.1* 2.1* * * * * * 23.6* 23.6* 2.2* 2.2* * * * * 24.8* 24.8* 24.9* 24.9* 2.6* 2.6* * * * 2.7* 2.7* 22.2* 22.2* 18.4* 18.4* * * 21.8* 21.8* 18.1* 18.1* 14.7* 14.7* 11.8* 11.8* 17.1* 17.1* 14.2* 14.2* 11.* 11.* 16.4* 16.4* 13.6* 13.6* 1.8* 1.8* 7.* 7.* 7.4* 7.4* 1.6* 1.6* 6.9* 6.9* 1.6* 1.6* 6.9* 6.9* 1.9* 1.9* 8.1* 8.1* 6.6* 6.6* 11.9* 11.9* 1.9* 1.9* 9.1* 9.1* 6.6* 6.6* 21.8* 21.8* 1.9* 1.9* 13.1* 13.1* 11.* 11.* * 6.6* 6.6* 22.7* 22.7* 16.2* 16.2* 13.2* 13.2* 11.6* 11.6* * 6.6* 6.6* 19.* 19.* 14.7* 14.7* * * 6.7* 6.7* 19.3* 19.3* 14.9* 14.9* 12.* 12.* * 6.7* 6.7* * * * * 6.9* 6.9* * * * * 6.9* 6.9* * * * * * * * * * 7.4* 7.4* * * * * * * * * 8.* 8.* 19.2* 19.2* * * * * 2.2* 2.2* * * * * * 21.9* 21.9* 26.6* 26.6* * * * * 22.9* 22.9* 26.3* 26.3* * * * * 29.1* 29.1* 23.6* 23.6* * * * * 28.6* 28.6* 23.3* 23.3* 18.9* 18.9* * * 11.4* 11.4* 19.* 19.* 1.* 1.* 12.1* 12.1* 11.* 11.* 18.3* 18.3* 1.* 1.* 11.* 11.* 1.9* 1.9* eight Can be slewed through 36 In longitudinal position of undercarriage Max. reach * imited by hydr. capacity The load values are quoted in tons (t) at stick end (without bucket), and may be swung 36 on firm and even ground. Adjacent values are valid for the undercarriage when in the longitudinal position. Capacities are valid for 6 mm wide double grouser pads. Indicated loads are based on ISO 167 standard and do not exceed 7 % of tipping or 87 % of hydraulic capacity (indicated via *). Without bucket cylinder, link and lever the lift capacities will increase by 1,1 kg. ifting capacity of the excavator is limited by machine stability and hydraulic capacity. According to European Standard, EN 474-: In the European Union excavators have to be equipped with an overload warning device, a load diagram and automatic safety check valves on hoist cylinders and stick cylinder(s), when they are used for lifting operations which require the use of lifting accessories R 966 itronic Stage IIIB

13 ift Capacities with Mono Boom 8.2 m Stick 4.2 m 3. m 4. m 6. m 7. m 9. m 1. m 12. m 13. m 1. m Underm carriage m 12. C-V 1. C-V 9. C-V 7. C-V 6. C-V 4. C-V 3. C-V 1. C-V C-V 1. C-V 3. C-V 4. C-V 6. C-V 7. C-V 9. C-V 1. C-V Stick. m 8.7* 8.7*.4*.4* 9.3* 9.3*.4*.4* 9.4* 9.4* 6.1* 6.1*.1*.1* 9.4* 9.4* 6.9* 6.9*.*.* 9.8* 9.8* 9.4* 9.4* 4.9* 4.9* 9.8* 9.8* 9.4* 9.4* 4.9* 4.9* 11.8* 11.8* 1.* 1.* * 4.8* 4.8* 12.* 12.* 1.6* 1.6* 9.8* 9.8*.4*.4* 4.8* 4.8* 2.* 2.* 17.* 17.* 13.* 13.* 11.* 11.* * * 4.9* 4.9* 17.3* 17.3* 13.7* 13.7* 11.6* 11.6* * * 4.9* 4.9* 2.* 2.* * * * *.1*.1* 2.2* 2.2* 1.3* 1.3* * * *.1*.1* * * * * *.3* * * * * *.4*.4* 12.6* 12.6* * * * *.8*.8* 13.2* 13.2* * * * * *.8*.8* 12.3* 12.3* 18.8* 18.8* * * * * 6.4* 13.* 13.* 19.* 19.* * * * * 6.* 6.* 18.9* 18.9* 2.9* 2.9* * * * * 7.4* 19.6* 19.6* 26.7* 26.7* * * * * 7.6* 7.6* 2.9* 2.9* 26.1* 26.1* * * * * 26.7* 26.7* 2.8* 2.8* 2.1* 2.1* * * 9.4* 9.4* 29.1* 29.1* 22.2* 22.2* 17.6* 17.6* * 1.* 1.* 28.3* 28.3* 21.7* 21.7* 17.2* 17.2* 13.6* 13.6* 1.* 1.* 1.9* 1.9* 12.6* 12.6* 9.7* 9.7* 11.8* 11.8* 9.* 9.* 3. m 4. m 6. m 7. m 9. m 1. m 12. m 13. m 1. m Underm carriage m 12. C-V 4.7* 4.7* 4.3* 4.3* 1. C-V 4.8* 4.8* 4.2* 4.2* 8.* 8.* 4.* 4.* 9. C-V 8.* 8.* 4.* 4.* 8.7* 8.7*.7*.7* 3.9* 3.9* 7. C-V 8.7* 8.7* 6.1* 6.1* 3.9* 3.9* 9.8* 9.8* 9.2* 9.2* * 3.8* 3.8* 6. C-V 9.9* 9.9* 9.2* 9.2* * 3.8* 3.8* 1.4* 1.4* 12.* 12.* 1.9* 1.9* * * 3.9* 3.9* 4. C-V 21.9* 21.9* 1.7* 1.7* 12.7* 12.7* 11.* 11.* 9.9* 9.9* * 3.9* 3.9* 18.4* 18.4* 18.6* 18.6* 14.4* 14.4* * * * 4.* 4.* 3. C-V 17.* 17.* 18.9* 18.9* 14.* 14.* 12.1* 12.1* * * 4.* 4.* 12.8* 12.8* * * * * * 4.2* 4.2* 1. C-V 12.8* 12.8* 21.3* 21.3* * * * * 4.2* 4.2* * 14.* * * * * * 4.* C-V 14.9* 14.9* * * * * * 4.6* 4.6* * 11.9* 18.4* 18.4* * * * *.* 1. C-V 12.4* 12.4* 18.9* 18.9* * * * * *.*.* 16.9* 16.9* 23.* 23.* * * * * 6.1*.7*.7* 3. C-V 17.4* 17.4* 24.2* 24.2* * * * *.8*.8* 22.3* 22.3* 28.* 28.* * * * * 6.8* 6.8* 4. C-V 22.9* 22.9* 28.2* 28.2* * * * * 6.9* 6.9* 28.8* 28.8* 2.2* 2.2* * * * 8.8* 8.8* 6. C-V 29.* 29.* 24.8* 24.8* 19.2* 19.2* * * 9.1* 9.1* 27.1* 27.1* 2.2* 2.2* 1.8* 1.8* 12.3* 12.3* 1.* 1.* 7. C-V 26.* 26.* 19.* 19.* 1.3* 1.3* 11.8* 11.8* 9.9* 9.9* C-V 1. C-V eight Can be slewed through 36 In longitudinal position of undercarriage Max. reach * imited by hydr. capacity The load values are quoted in tons (t) at stick end (without bucket), and may be swung 36 on firm and even ground. Adjacent values are valid for the undercarriage when in the longitudinal position. Capacities are valid for 6 mm wide double grouser pads. Indicated loads are based on ISO 167 standard and do not exceed 7 % of tipping or 87 % of hydraulic capacity (indicated via *). Without bucket cylinder, link and lever the lift capacities will increase by 1,1 kg/82 kg* ifting capacity of the excavator is limited by machine stability and hydraulic capacity. According to European Standard, EN 474-: In the European Union excavators have to be equipped with an overload warning device, a load diagram and automatic safety check valves on hoist cylinders and stick cylinder(s), when they are used for lifting operations which require the use of lifting accessories. * for stick. m R 966 itronic Stage IIIB 13

14 Backhoe Bucket with Mono Boom 1. m and eavy Counterweight ft m R m Digging Envelope * Stick length m Max. digging depth m Max. reach at ground level m Max. dumping height m Max. teeth height m Digging force ISO kn t Breakout force ISO kn t * with bucket R 96 litronic` Operating Weight and Ground Pressure The operating weight includes the basic machine with heavy counterweight, mono boom 1. m, stick 4.2 m and bucket 1. m 3 (2, kg). Undercarriage C-V Pad width mm Weight kg 7,8 71, 72, 74, 7,2 76,3 Ground pressure kg/cm ft Buckets Machine stability per ISO 167* (7% of tipping capacity) -Undercarriage STD 1) 2) STD 3) Cutting width Capacity ISO 741 Weight C-V-Undercarriage Stick length (m) Stick length (m) mm m 3 kg 1,1 1. 2, X X Y v X X X v 1,3 2. 2,7 X Y V v X X Y v 1, 2. 2,9 Y V y v Y Y V v 1,7 3. 3,1 V y v v V V y v 1,4 1. 3,2 X Y V v X X Y v 1,6 2. 3, Y V y v Y Y V v 1,8 2. 3,8 V y v v V V y v 1, ,1 v v v Y v v v Y 1, 2. 2,2 v v v V v v v V 4) 1, ,4 v v v Y v v v Y * Indicated loads are based on ISO 167 max. stick length, lifted 36 on firm 1) Standard bucket with teeth Z 7 2) bucket with teeth Z 9 3) Standard bucket from R 96 litronic` with teeth Z 7 4) bucket from R 96 litronic` with teeth Z 7 Other backhoes available on request Max. material weight X = 2.2 t/m 3, Y = 1.8 t/m 3, V = 1. t/m 3, y = 1.2 t/m 3, v = not authorized 14 R 966 itronic Stage IIIB

15 ift Capacities with Mono Boom 1. m and eavy Counterweight Stick 3. m 3. m 4. m 6. m 7. m 9. m 1. m 12. m 13. m 1. m Underm carriage m 12. C-V 1. C-V 9. C-V 7. C-V 6. C-V 4. C-V 3. C-V 1. C-V C-V 1. C-V 3. C-V 4. C-V 6. C-V 7. C-V 9. C-V 1. C-V Stick 3.4 m 7.8* 7.8* 7.8* 7.8* 7.8* 7.8* 7.7* 7.7* 7.6* 7.6* 7.7* 7.7* 7.6* 7.6* 8.8* 8.8* 8.* 8.* 7.7* 7.7* 7.4* 7.4* 13.* 13.* 1.4* 1.4* 8.9* 8.9* 8.* 8.* 7.7* 7.7* 7.4* 7.4* 11.9* 11.9* 9.7* 9.7* 8.* 8.* 7.9* 7.9* 7.4* 7.4* 12.1* 12.1* 9.8* 9.8* 8.6* 8.6* 7.9* 7.9* 7.4* 7.4* 1.7* 1.7* 9.1* 9.1* * 7. 7.* 1.8* 1.8* 9.2* 9.2* 8.3* 8.3* 7.6* 7.6* * * * * 11.8* 11.8* 9.8* 9.8* * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * 18.4* 18.4* * * * * 18.4* 18.4* 1.4* 1.4* * * * 2.1* 2.1* 17.7* 17.7* * * * 8. 9.* 2.1* 2.1* 17.* 17.* 14.7* 14.7* * * 9. 9.* 19.* 19.* 16.2* 16.2* 13.6* 13.6* 11.2* 11.2* 9.7* 9.7* 18.8* 18.8* 16.* 16.* 13.4* 13.4* 11.1* 11.1* 9.7* 9.7* 16.1* 16.1* 13.6* 13.6* 11.3* 11.3* 9.7* 9.7* 1.7* 1.7* 13.3* 13.3* 1.9* 1.9* 9.6* 9.6* 3. m 4. m 6. m 7. m 9. m 1. m 12. m 13. m 1. m Underm carriage m 12. C-V 7.2* 7.2* 6.7* 6.7* 1. C-V 7.2* 7.2* 6.7* 6.7* 7.3* 7.3* 6.4* 6.4* 9. C-V 7.3* 7.3* 6.4* 6.4* 8.4* 8.4* 7.6* 7.6* 7.3* 7.3* 6.3* 6.3* 7. C-V 8.* 8.* 7.7* 7.7* 7.3* 7.3* 6.3* 6.3* 11.3* 11.3* 9.3* 9.3* 8.2* 8.2* 7.* 7.* 6.3* 6.3* 6. C-V 11.* 11.* 9.4* 9.4* 8.2* 8.2* 7.6* 7.6* 6.3* 6.3* 13.2* 13.2* 1.3* 1.3* 8.8* 8.8* 7.9* 7.9* 6.4* 6.4* 4. C-V 13.3* 13.3* 1.4* 1.4* 8.9* 8.9* 8.* 8.* 6.4* 6.4* * 11.3* 11.3* * * * * 3. C-V 14.9* 14.9* 11.4* 11.4* 9.* 9.* 8.4* 8.4* * 6.6* 6.6* * * * * * * 1. C-V * * * * * * * * * * * C-V * * * * * * * * * * 1. C-V * * * * * 19.* 19.* * * * * * 3. C-V 18.9* 18.9* * * * * * 21.6* 21.6* 18.1* 18.1* * * * * 4. C-V 21.* 21.* 21.* 21.* 18.* 18.* 14.9* 14.9* * * * 24.* 24.* 2.2* 2.2* 16.7* 16.7* 13.9* 13.9* * 9.3* 9.3* 6. C-V 24.3* 24.3* 2.* 2.* 16.* 16.* 13.7* 13.7* 11.4* 11.4* 9.4* 9.4* 17.4* 17.4* 14.* 14.* 11.9* 11.9* 9.4* 9.4* 7. C-V 17.* 17.* 14.1* 14.1* 11.6* 11.6* 9.4* 9.4* 1.2* 1.2* 8.8* 8.8* 9. C-V C-V eight Can be slewed through 36 In longitudinal position of undercarriage Max. reach * imited by hydr. capacity The load values are quoted in tons (t) at stick end (without bucket), and may be swung 36 on firm and even ground. Adjacent values are valid for the undercarriage when in the longitudinal position. Capacities are valid for 6 mm wide double grouser pads. Indicated loads are based on ISO 167 standard and do not exceed 7 % of tipping or 87 % of hydraulic capacity (indicated via *). Without bucket cylinder, link and lever the lift capacities will increase by 1,1 kg. ifting capacity of the excavator is limited by machine stability and hydraulic capacity. According to European Standard, EN 474-: In the European Union excavators have to be equipped with an overload warning device, a load diagram and automatic safety check valves on hoist cylinders and stick cylinder(s), when they are used for lifting operations which require the use of lifting accessories R 966 itronic Stage IIIB 1

16 ift Capacities with Mono Boom 1. m and eavy Counterweight Stick 4.2 m 3. m 4. m 6. m 7. m 9. m 1. m 12. m 13. m 1. m Underm carriage m.3*.3* 12. C-V.2*.2* 4.9* 4.9* 1. C-V 4.9* 4.9* 6.3* 6.3* 4.7* 4.7* 9. C-V 6.4* 6.4* 4.7* 4.7* 6.9* 6.9* 6.* 6.* 4.6* 4.6* 7. C-V 6.9* 6.9* 6.* 6.* 4.6* 4.6* 13.4* 13.4* 1.1* 1.1* 8.4* 8.4* 7.* 7.* 6.9* 6.9* 6.6* 6.6* 4.6* 4.6* 6. C-V 13.7* 13.7* 1.3* 1.3* 8.* 8.* 7.* 7.* 6.9* 6.9* 6.6* 6.6* 4.6* 4.6* 11.9* 11.9* 9.* 9.* 8.1* 8.1* 7.3* 7.3* * 4.7* 4.7* 4. C-V 12.1* 12.1* 9.6* 9.6* 8.2* 8.2* 7.3* 7.3* 6.8* 6.8* 4.7* 4.7* 13.* 13.* 1.6* 1.6* 8.8* 8.8* * * 4.8* 4.8* 3. C-V 13.7* 13.7* 1.7* 1.7* 8.9* 8.9* 7.8* 7.8* * 4.8* 4.8* * * 9. 9.* * *.*.* 1. C-V 14.8* 14.8* 11.* 11.* 9.6* 9.6* * *.1*.1* * * * * *.4*.4* C-V * * * * *.4*.4* * 14.7* * * * * *.8*.8* 1. C-V 1.3* 1.3* * * * * *.9*.9* 14.* 14.* * * * * 7. 9.* * 3. C-V 14.7* 14.7* 19.* 19.* 1. 1.* * * * 6.6* 6.6* 17.3* 17.3* 2.6* 2.6* 18.8* 18.8* * * * * * 4. C-V 17.9* 17.9* 21.4* 21.4* 18.7* 18.7* 1.1* 1.1* * * * 7.7* 7.7* 23.2* 23.2* 22.2* 22.2* 17.7* 17.7* * * * * 6. C-V 23.9* 23.9* 22.* 22.* 17.* 17.* 14.2* 14.2* 11.7* 11.7* 9.7* 9.7* 8.6* 8.6* 26.* 26.* 19.7* 19.7* 1.8* 1.8* 12.9* 12.9* 1.* 1.* 8.8* 8.8* 7. C-V 2.* 2.* 19.4* 19.4* 1.* 1.* 12.7* 12.7* 1.3* 1.3* 8.8* 8.8* 1.7* 1.7* 12.7* 12.7* 1.1* 1.1* 8.7* 8.7* 9. C-V 1.1* 1.1* 12.3* 12.3* 9.7* 9.7* 8.7* 8.7* C-V Stick. m 3. m 4. m 6. m 7. m 9. m 1. m 12. m 13. m 1. m Underm carriage m 4.1* 4.1* 12. C-V 4.1* 4.1*.8*.8* 3.9* 3.9* 1. C-V.8*.8* 3.8* 3.8*.9*.9* 4.4* 4.4* 3.7* 3.7* 9. C-V.9*.9* 4.9* 4.9* 3.7* 3.7* 6.1* 6.1* 6.* 6.* 3.6* 3.6* 7. C-V 6.2* 6.2* 6.* 6.* 3.6* 3.6* 7.1* 7.1* 6.* 6.* 6.2* 6.2* 3.6* 3.6* 6. C-V 8.* 8.* 7.1* 7.1* 6.6* 6.6* 6.2* 6.2* 3.6* 3.6* 1.* 1.* 11.* 11.* 9.* 9.* 7.8* 7.8* 7.* 7.* 6.* 6.* 3.7* 3.7* 4. C-V 1.4* 1.4* 11.2* 11.2* 9.1* 9.1* 7.9* 7.9* 7.1* 7.1* 6.6* 6.6* 3.7* 3.7* 12.8* 12.8* 1.1* 1.1* 8.* 8.* 7.* 7.* * 4.7* 4.7* 3.8* 3.8* 3. C-V 12.9* 12.9* 1.2* 1.2* 8.6* 8.6* 7.6* 7.6* 6.9* 6.9* 4.8* 4.8* 3.8* 3.8* 14.2* 14.2* 11.1* 11.1* 9.2* 9.2* * * 4.7* 4.7* 4.* 4.* 1. C-V 14.3* 14.3* 11.2* 11.2* 9.3* 9.3* 8.1* 8.1* * 4.6* 4.6* 4.* 4.* * 11.9* * * * * * 4.2* 4.2* C-V 12.2* 12.2* 1.2* 1.2* 12.* 12.* * * * 4.2* 4.2* * 8.6* 1.* 1.* * * * * * 4.6* 4.6* 1. C-V 9.2* 9.2* 1.9* 1.9* * * * * * 4.6* 4.6* 1.7* 1.7* 13.* 13.* * * * * * *.1*.1* 3. C-V 11.2* 11.2* 14.* 14.* 2.2* 2.2* * * * * *.1*.1* 1.2* 1.2* 18.* 18.* * * * * *.8*.8* 4. C-V 1.7* 1.7* 19.* 19.* 19.6* 19.6* * * * *.9*.9* 19.9* 19.9* 24.* 24.* 18.8* 18.8* * * * * 6.9* 6.9* 6. C-V 2.4* 2.4* 24.1* 24.1* 18.6* 18.6* 14.9* 14.9* * * * 7.* 7.* 2.2* 2.2* 22.1* 22.1* 17.2* 17.2* 13.9* 13.9* * * 8.4* 8.4* 7. C-V 2.8* 2.8* 21.8* 21.8* 17.* 17.* 13.8* 13.8* 11.3* 11.3* 9.2* 9.2* 8.4* 8.4* 2.* 2.* 18.8* 18.8* 14.8* 14.8* 12.* 12.* 9.* 9.* 8.6* 8.6* 9. C-V 24.8* 24.8* 18.3* 18.3* 14.* 14.* 11.7* 11.7* 9.2* 9.2* 8.6* 8.6* 1.* 1.* 8.3* 8.3* 1. C-V 9.9* 9.9* 8.2* 8.2* eight Can be slewed through 36 In longitudinal position of undercarriage Max. reach * imited by hydr. capacity The load values are quoted in tons (t) at stick end (without bucket), and may be swung 36 on firm and even ground. Adjacent values are valid for the undercarriage when in the longitudinal position. Capacities are valid for 6 mm wide double grouser pads. Indicated loads are based on ISO 167 standard and do not exceed 7 % of tipping or 87 % of hydraulic capacity (indicated via *). Without bucket cylinder, link and lever the lift capacities will increase by 1,1 kg/82 kg* ifting capacity of the excavator is limited by machine stability and hydraulic capacity. According to European Standard, EN 474-: In the European Union excavators have to be equipped with an overload warning device, a load diagram and automatic safety check valves on hoist cylinders and stick cylinder(s), when they are used for lifting operations which require the use of lifting accessories. * for stick. m 16 R 966 itronic Stage IIIB

17 Dimensions Front Shovel E D A2 A1 A W C K Q P V X U Z N S B G R1.1 mm A 3,1 A1 4,16 A2 4,42 C 4,31/4,1* D 4,13 E 4,27 3,43 K 1,43 4,7 P 1,31 * with FOPS top guard mm Q 61 S 3,3 U,69 N 6 7 B 3,91 3,91 4, G 4,29 4,29 4,29 Z 6,98 V 9,9 W 4, X 13,2 R 966 itronic Stage IIIB 17

18 Front Shovel ft m T R11.1 Digging Envelope Max. reach at ground level Max. dumping height Max. crowd length Bucket opening width T Max. crowd force Max. crowd force at ground level Max. breakout force 9.1 m 7.1 m 3.6 m 1,6 mm kn/1. t 41 kn/41.8 t 37 kn/37.7 t Operating Weight and Ground Pressure The operating weight includes the basic machine with cab elevation 8 mm, shovel attachment and front shovel 4. m 3 (7, kg), level II. Undercarriage m Pad width mm 6 Weight kg 68, 69,2 Ground pressure kg/cm ft Front Shovels Cutting width Capacity ISO 741 Weight Wear kit level -Undercarriage Shovel Attachment mm m 3 kg 2,3 3. 6,6 II X 2,3 3. 7,2 III X 2,6 4. 6, I Y 2,6 4. 7, II Y 2,6 4. 7,7 III V evel I: For non-abrasive materials, such as limestone without flint inclusion, shot material or easily breakable rock, i.e., deteriorated rock, soft limestone, shale, etc. evel II: For pre-blasted heavy rock, or deteriorated, cracked material (classification 3 to 4, accord. to DIN 183) evel III: For highly-abrasive materials such as rock with a high silica content, sandstone etc. Max. material weight X = 2.2 t/m 3, Y = 1.8 t/m 3, V = 1.6 t/m 3 18 R 966 itronic Stage IIIB

19 Component Dimensions and Weights R12.1 Basic Machine Track pads mm 6 7 Weight with backhoe attachment and -undercarriage kg 39,1 39,8 4,8 Weight with shovel attachment and -undercarriage kg 39,2 39,9 4,9 Weight with backhoe attachment and C-V-undercarriage kg 42,8 43, 44,6 Basic Machine C-V W3 V3 X3 V3 Mono boom 7. m mm 9,9 9,9 Mono boom 8.2 m mm 11,2 11,2 Mono boom 1. m mm 13,1 13,1 W3 Mono boom 7. m mm 3,4 3, Mono boom 8.2 m mm 3,6 3,7 Mono boom 1. m mm 4,1 4,2 X3 Mono boom 7. m mm 11,4 11,4 Mono boom 8.2 m mm 12,7 12,7 Mono boom 1. m mm 14, 14, Cab Elevation 8 mm ength mm 1,89 eight mm 92 Width mm 1,37 Weight kg 6 Counterweight Std heavy ength mm eight mm 1,4 1,4 Width mm 3,36 3,36 Weight kg 11, 14, Upper Protection Screen ength mm 1,96 eight mm 19 Width mm 1,11 Weight kg 7 oist Cylinders (two) ength mm 2,6 eight mm 49 Width mm 36 Weight kg 2 x 7 Mono Boom with Stick Cylinder Stick length m ength mm 7,3 8, 1,3 eight mm 2,2 2, 2,3 Width mm 1,4 1,4 1,4 Weight kg 7,2 7,9 9, Stick with Bucket Cylinder Stick length m ength mm 3,9 4,2 4,6,4 6,2 eight mm 1,2 1,2 1,2 1,2 1,2 Width mm Weight kg 3, 3,6 3,8 4,1 4, R 966 itronic Stage IIIB 19

20 Component Dimensions and Weights Backhoe Buckets Std Cutting width mm 1,1 1,3 1, 1,7 Capacity m ength mm 2,4 2,4 2,4 2,4 eight mm 1,7 1,7 1,7 1,7 Width mm 1,2 1,4 1,6 1,8 Weight kg 2, 2,7 2,9 3,1 Backhoe Buckets Std Cutting width mm 1,9 2,1 2,4 2,6 Capacity m ength mm 2,4 2,4 2,4 2,4 eight mm 1,7 1,7 1,7 1,7 Width mm 2, 2,2 2,4 2,6 Weight kg 3,4 3,6 3,9 4,2 Backhoe Buckets Cutting width mm 1,4 1,6 1,8 2, Capacity m ength mm 2,3 2,3 2,3 2,3 eight mm 1,6 1,6 1,6 1,6 Width mm 1,4 1,6 1,8 2, Weight kg 3,2 3, 3,8 4,1 Backhoe Buckets Cutting width mm 2,1 2,1 2,3 2, Capacity m ength mm 2,3 2,4 2,4 2,4 eight mm 1,6 1,7 1,7 1,7 Width mm 2,2 2,2 2,4 2,6 Weight kg 4,4 4,6,,3 Backhoe Buckets V Cutting width mm 1,9 2,1 2,1 2,1 Capacity m ength mm 2,3 2,3 2,4 2,6 eight mm 1,6 1,6 1,7 1,8 Width mm 2, 2,2 2,2 2,2 Weight kg 4,6,,2,4 Backhoe Buckets R 96 Std Cutting width mm 1,3 1, 1,7 1,9 Capacity m ength mm 2,2 2,2 2,2 2,2 eight mm 1, 1, 1, 1, Width mm 1,4 1,6 1,8 2, Weight kg 2,1 2,2 2, 2,6 2 R 966 itronic Stage IIIB

21 Component Dimensions and Weights Shovel Boom ength mm 4,7 eight mm 1,9 Width mm 1,9 Weight without crowd cylinder kg, Weight crowd cylinder kg 6 Shovel Stick ength mm 3,2 eight mm 1,1 Width mm 1, Weight kg 2, Shovel Bucket Cylinders (two) ength mm 2, Ø Diameter mm 3 Width mm Weight kg 2 x 4 Front Shovels Cutting width mm 2,3 2,6 I Capacity m ength mm 2,2 2,2 eight mm 2,4 2,4 Width mm 2,4 2,7 Weight evel I kg 6, evel II kg 6,6 7, evel III kg 7,2 7,7 R 966 itronic Stage IIIB 21

22 Standard Equipment Undercarriage ashing eyelets ifetime-lubricated track rollers Track guide at each track frame (three pieces) Tracks sealed and greased Uppercarriage Engine hood with lift help Extended tool kit Fuel tank cap, lockable andrails, non slip surfaces Maintenance-free swing brake lock Rear view monitoring camera Sound insulation Toolbox lockable Walkway, both-sided ydraulic System Filter with integrated fine filter area ydraulic tank shut-off valve and pumps iebherr hydraulic oil Pressure storage for controlled lowering of equipment with engine turned off Pressure test ports for hydraulic Stepless work mode selector Engine After-cooled Air pre-filter with dust trap Common-Rail system injection Conform with stage IIIB / Tier 4i emission standard Dry-type air cleaner w/pre-cleaner, main and safety elements Engine cold starting aid Fuel filter and water separator SCR system (Selective Catalytic Reduction) Sensor-controlled automatic engine idling Turbo charger Operator s Cab 7" colour multifunction display with touchscreen All tinted windows Automatic air conditioning Cigarette lighter and ashtray Coat hook Cup holder Dome light Door with sliding windows Emergency exit rear window Fuel consumption indicator ydro mounts Impact-resistant front window and roof window idat Plus (enhanced iebherr data transfer system) * Mechanical hour meters, readable from outside the cab Operator seat iebherr-comfort Preparation for radio installation Rain hood over front window opening Roll-down sun blind Rubber floor mat Seat belt Storage bin Storage space Two headlights (alogen) Wiper/washer Attachment eadlights on boom (both-sided, halogen) iebherr full-automatic central lubrication system (except connecting link for bucket kinematics) Re-Generation plus Safety check valves hoist cylinder Safety check valves stick cylinder * optionally extendable after one year 22 R 966 itronic Stage IIIB

23 Individual Options Undercarriage Cover and base protection plates Protection plate for wrecking ball operation Track guide at each track frame (four pieces) Travel drive protection Travel gear support, reinforced Uppercarriage Cab elevation Camera for side area monitoring Customized colors eadlights with protection eavy counterweight Refuelling pump (electrical) Rock protection (swing gear and lubrication pipes) Walkway, wide version with guard rail Wiggins quick-coupling for fuel ydraulic System Bypass filter iebherr hydraulic oil, biodegradable iebherr hydraulic oil, specially for warm and cold regions Preheating for hydraulic oil (24 V) Engine Automatic engine shut-down (adjustable time-period) Engine compartment light Preheating for fuel, coolant or engine oil (24 V) Operator s Cab Additional headlights front or/and rear (alogen or ED) Amber beacon Auxiliary heater (programmable timer) Electric cool box (12 V) Electronic drive away lock Engine shut-down (emergency stop) in cab Falling objects protection structure (FOPS) Fire extinguisher Footrest Front guard protection structure (FGPS), lockable eadlights (two pieces, ED) Operator seat iebherr-premium Proportional controls iebherr Radio Comfort Roof wiper Sun visor Travel alarm system Attachment Automatic lubrication system for connecting link Bottom boom protection for mono boom or stick eadlights on boom (both-sided, ED) igh pressure circuit ydraulic or mechanical quick coupler iebherr line of buckets iebherr tooth system Middle pressure circuit Overload warning device Piston rod guard for bucket cylinders (backhoe + shovel) Piston rod guard for crowd cylinder (shovel) Piston rod guard for hoist cylinder (backhoe) Security for hoist cylinder in grab or hammer operation Tool Control Options and/or special attachments, supplied by vendors other than iebherr, are only to be installed with the knowledge and approval of iebherr in order to retain warranty. R 966 itronic Stage IIIB 23

24 The iebherr Group of Companies Wide Product Range The iebherr Group is one of the largest construction equipment manufacturers in the world. iebherr s high-value products and services enjoy a high reputation in many other fields. The wide range includes domestic appliances, aerospace and transportation systems, machine tools and maritime cranes. Exceptional Customer Benefit Every product line provides a complete range of models in many different versions. With both their technical excellence and acknowledged quality, iebherr products offer a maximum of customer benefits in practical application. State-of-the-art Technology To provide consistent, top quality products, iebherr attaches great importance to each product area, its components and core technologies. Important modules and components are developed and manufactured in-house, for instance the entire drive and control technology for construction equipment. Worldwide and Independent ans iebherr founded the iebherr family company in Since that time, the enterprise has steadily grown to a group of more than 13 companies with over 41, employees located on all continents. The corporate headquarters of the Group is iebherr-international AG in Bulle, Switzerland. The iebherr family is the sole owner of the company. RG-BK-RP FR/SP web-.1_enGB All illustrations and data may differ from standard equipment. Subject to change without notice. All indicated loads are based in accordance with ISO iebherr-france SAS 2 avenue Joseph Rey, B.P. 9287, FR-68 Colmar Cedex , Fax info.lfr@liebherr.com