Crawler Excavator. Attachment Information. Liebherr Crawler Excavator with Demolition Attachment. litronic`

Transcription

1 Crawler Excavator Attachment Information R 944 C litronic` iebherr Crawler Excavator with Demolition Attachment

2 Demolition Attachment, m ft m To order a complete machine you need the following Cab for demolition application ydraulic control for rotary drive ydraulic control for hammer/shears with Tool Control and iebherr- Demolition-Control (DC) oist cylinders with regeration plus and load holding valves Basic boom pinned in mounting hole II of boom foot bracket eavy counterweight 9, t For demolition application, following additional items are also required: Demolition boom 9, m Intermediate boom, m Demolition stick 6, m with linkage 9 i Tool (backhoe bucket, demolition shears, concrete nibblers, etc.) Storage racks for demolition attachment Integral protection grid FOPS m Optional Cab tiltable Integral protection grid for cab on tilting device FOPS Counterweight removable ydraulic for removable counterweight Storage rack with catwalks ydraulic accessory for quick change adapter on basic boom Demolition stick with linkage 9 i ft Reach imitation 1 m 1 m 14 m II I Uppercarriage demolition Demolition boom 9, m + Intermediate boom + Demolition stick 6, m Tool weight* in t -Undercarriage, 1, 1, -Undercarriage, 1,7 1, -D-Undercarriage,, 1,7 * included quick change adapter, adapter plate and tool III II Operating Weight and Ground Pressure Uppercarriage demolition with cab tiltable Operating weight includes basic machine with heavy counterweight 9, t, demolition boom 9, m, intermediate boom, demolition stick 6, m and working tool, t. Undercarriage -D Pad width mm Weight kg Ground pressure kg/cm,9,98 1, R 944 C itronic Demolition Attachment

3 Demolition Attachment 1, m ft m To order a complete machine you need the following Cab for demolition application ydraulic control for rotary drive ydraulic control for hammer/shears with Tool Control and iebherr- Demolition-Control (DC) oist cylinders with regeration plus and load holding valves Basic boom pinned in mounting hole II of boom foot bracket eavy counterweight 9, t For demolition application, following additional items are also required: Demolition boom 7, m Intermediate boom, m Demolition stick 6, m with linkage 9 i Tool (backhoe bucket, demolition shears, concrete nibblers, etc.) Storage racks for demolition attachment Integral protection grid FOPS m 4 1 ft Optional Cab tiltable Integral protection grid for cab on tilting device FOPS Counterweight removable ydraulic for removable counterweight Storage rack with catwalks ydraulic accessory for quick change adapter on basic boom Demolition stick with linkage 9 i II I Uppercarriage demolition III II Reach imitation 1 m 1 m 14 m Demolition boom 7, m + Intermediate boom + Demolition stick 6, m Tool weight* in t -Undercarriage, 1, 1, -Undercarriage, 1,7 1, -Undercarriage,7, 1, -D-Undercarriage,,, * included quick change adapter, adapter plate and tool Operating Weight and Ground Pressure Uppercarriage demolition with cab tiltable Operating weight includes basic machine with heavy counterweight 9, t, demolition boom 7, m, intermediate boom, demolition stick 6, m and working tool, t. Undercarriage -D Pad width mm Weight kg Ground pressure kg/cm,9,91,96 1, R 944 C itronic Demolition Attachment

4 Backhoe Attachment with Main Boom 4, m ft 4 4 m R189 For backhoe application, following items are required Main boom 4, m Stick,1 m Stick,6 m Stick, m Storage racks for backhoe attachment ft m m ft m ft Optional ydraulic lines AS * for main boom 4, m ydraulic lines AS * for stick,1 m ydraulic lines AS * for stick,6 m ydraulic lines AS * for stick, m ydraulic lines rotary drive for main boom 4, m ydraulic lines rotary drive for stick,1 m ydraulic lines rotary drive for stick,6 m ydraulic lines rotary drive for stick, m Backhoe bucket as required * AS = hydraulic control for hydraulic accessory Digging Envelope Main Boom pinned in upper (in lower) bearing 1 Stick lengths m,1,6, Max. digging depth m 4, (,7) 4,8 ( 6,), ( 6,9) Max. reach at ground level m 11, (1,9) 1, (11,4) 1,7 (1,) Max. dump height m 9, ( 7,) 9,6 ( 7,) 1,1 ( 7,8) Max. teeth height m 1,1 (1,8) 1, (11,1) 14, (11,4) Digging Forces with Quick Change Adapter 1 Digging force ISO kn t 1, 19,1 16,4 Breakout force ISO kn t 1, 1, 1, without Quick Change Adapter Digging force ISO kn t,8,1 17,1 Breakout force ISO kn t 4,1 4,1 4,1 Max. breakout force with ripper bucket without quick change adapter kn (,6 t) Operating Weight and Ground Pressure Operating weight includes basic machine with main boom 4, m, stick,6 m, quick change adapter 66 and backhoe bucket 1, m. Undercarriage -D Pad width mm Weight kg Ground pressure kg/cm,87,8,9,98 Buckets without Quick Change Adapter with Quick Change Adapter Cutting width mm Capacity ISO 741 m 1, 1, 1,7,,, 1, 1, 1, 1,7,, t/m 1,8 1,8 1,8 1, 1, 1,8 1,8 1,8 1, 1, Max. possible material weight t/m 1,8 1,8 1,8 1,8 1,8 1, 1,8 1,8 1,8 1,8 1,8 1, / -D t/m 1,8 1,8 1,8 1,8 1,8 1,8 1,8 1,8 1,8 1,8 1,8 1,8 Weight of STD bucket with iebherr teeth Z kg Weight of D bucket with iebherr teeth Z 1) kg Max. stick length for machine stability per ISO 167: -Undercarriage m,,6,1,1,1,,6,1,1,1 -Undercarriage m,,,,6,1,1,,,,6,1,1 -Undercarriage m,,,,,6,1,,,,,6,1 -D-Undercarriage m,,,,,,6,,,,,,6 1) For applications over surface class 6, according to OB, part C, DIN 18 4 R 944 C itronic Demolition Attachment

5 ift Capacities with Main Boom 4, m (pinned in upper bearing) Stick,1 m eight Under- Radius of load from centerline of machine (m) (m) carriage 4, 6, 7, 9, 1, 1, 9, 7, 6, 4,, 1, 1,, -D -D -D -D -D -D -D -D -D -D 8,8# ( 8,8#) 8,8# ( 8,8#) 11,8 (1,6#) 7,7 ( 8,#) 1,6# (1,6#) 8,7# ( 8,7#) 1,7# (1,7#) 9,1# ( 9,1#) 1,7# (1,7#) 9,1# ( 9,1#) 17,4# (17,4#) 11, (14,8#) 7,7 (11,8 ) 17,8# (17,8#) 1,6 (14,9#) 9, (1,4#) 18,1# (18,1#) 14, (14,9#) 9,9 (1,4#) 18,# (18,#) 14,9# (14,9#) 1,4 (1,4#) 16,1 (,8#) 1,4 (1,6#) 7, (11,4 ), ( 8, ) 19,6 (,8#) 1,6 (1,6#) 8,8 (1,7#) 6, (1, ),7 (,9#) 1, (1,6#) 9,4 (1,7#) 6,9 (1,7#),9# (,9#) 1,6# (1,6#) 1, (1,7#) 8,9 (1,7#) 9, (1, ) 6,7 (1,7 ), ( 8, ) 11,4 (16,#) 8, (1,9#) 6, (1, ) 1,1 (16,#) 8,8 (1,#) 6,7 (1,7 ) 1,7 (16,#) 11,4 (1,#) 8,6 (1,7#) 8, (14, ) 6, (1, ) 4,7 ( 7,7 ) 1,4 (16,4#) 7,7 (1,8 ),9 ( 9,7 ) 11, (16,4#) 8, (1,#) 6,4 (1,4 ) 14,7 (16,4#) 1,8 (1,#) 8, (1,6#) 7,8 (1, ),8 ( 9,7 ) 4, ( 7, ) 9,9 (1,4#) 7,4 (1, ),7 ( 9, ) 1,7 (1,#) 7,9 (1,#) 6, (1,1#) 14, (1,#) 1,4 (1,#) 8,1 (1,1#) 7,7 (1,4 ),6 ( 9,6 ) 4,4 ( 7,4 ) 9,8 (1,#) 7, (11,4#),6 ( 9,1#) 1,6 (1,4#) 7,8 (11,#) 6,1 ( 9,1#) 1,4# (1,4#) 1, (11,#) 8, ( 9,1#) 7,8 (11,1#),7 ( 9,6 ) 4, ( 7,4#) 1, (11,#) 7, ( 9,#),7 ( 7,#) 1,8 (1,9#) 7,8 ( 9,4#) 6, ( 7,#) 1,9# (1,9#) 9,4# ( 9,4#) 7,# ( 7,#) Stick,6 m eight Under- Radius of load from centerline of machine (m) (m) carriage 4, 6, 7, 9, 1, 1, 9, 7, 6, 4,, 1, 1,, -D -D -D -D -D -D -D -D -D -D 9,9# ( 9,9#) 1,# (1,#) 1,1# (1,1#) 1,1# (1,1#) 11,# (11,#) 8, ( 9,7#) 11,4# (11,4#) 9,7 ( 9,8#) 11,4# (11,4#) 9,9# ( 9,9#) 11,4# (11,4#) 9,9# ( 9,9#) 11,6 (1,8#) 7,9 (11,9#), ( 7,9#) 1,9# (1,9#) 9, (1,#) 6,7 ( 8,1#) 1,# (1,#) 1, (1,1#) 7, ( 8,#) 1,# (1,#) 1,1# (1,1#) 8,# ( 8,#) 16,9 (19,9#) 1,7 (1,1#) 7,4 (11, ), ( 8,4 ),# (,#) 1,9 (1,#) 9, (1,4#) 6,6 (1,4 ),1# (,1#) 1,7 (1,#) 9,6 (1,4#) 7, (1,#),1# (,1#) 1,# (1,#) 1,1 (1,4#) 9, (1,#) 14, (14,4#) 9, (1, ) 6,8 (1,9 ),1 ( 8,1 ) 1,1# (1,1#) 11,7 (16,#) 8,4 (1,7#) 6, (1,1 ) 1,# (1,#) 1,4 (16,#) 9, (1,8#) 6,7 (1,6#) 1,# (1,#) 16,# (16,#) 11, (1,8#) 8,7 (1,6#) 8, (14, ) 6, (1, ) 4,7 ( 7,8 ),7 (6,1 ) 1,6 (16,4#) 7,8 (1,9 ) 6, ( 9,7 ) 4,7 (7,4#) 11,4 (16,4#) 8,4 (1,9#) 6,4 (1,4 ), (7,4#) 14,9 (16,4#) 1,9 (1,9#) 8,4 (1,6#) 6,6 (7,4#) 7,8 (1,6 ),8 ( 9,8 ) 4, ( 7, ),6 (6, ) 1, (1,8#) 7,4 (1,4 ),7 ( 9,4 ) 4,6 (7, ) 1,8 (1,8#) 7,9 (1,6#) 6, (1, ) 4,9 (7,6#) 14, (1,8#) 1,4 (1,6#) 8,1 (1,#) 6, (7,6#) 7,# ( 7,#) 7,6 (1, ),6 ( 9, ) 4, ( 7, ) 7,7# ( 7,7#) 9,8 (14,#) 7,1 (11,8#),6 ( 9, ) 8,# ( 8,#) 1, (14,#) 7,7 (11,7#) 6, ( 9,4#) 8,# ( 8,#) 14,1 (14,#) 1, (11,7#) 7,9 ( 9,4#) 7,7 (1,#),6 ( 9, ) 4, ( 7, ) 9,8 (1,1#) 7,1 (1,#),6 ( 8,#) 1,6 (1,#) 7,7 (1,1#) 6, ( 8,#) 1,# (1,#) 1,1# (1,1#) 8,# ( 8,#) 7,9 ( 9,1#),7 ( 7,8#) 9,# ( 9,#) 7, ( 7,7#) 7,# ( 7,#) 7,# ( 7,#) Stick, m eight Under- Radius of load from centerline of machine (m) (m) carriage 4, 6, 7, 9, 1, 1, 9, 7, 6, 4,, 1, 1,, -D -D -D -D -D -D -D -D -D -D 6,# ( 6,#) 6,7# ( 6,7#) 6,9# ( 6,9#) 6,9# ( 6,9#) 8, ( 8,6#),4# (,4#) 8,6# ( 8,6#),6# (,6#) 8,7# ( 8,7#),8# (,8#) 8,7# ( 8,7#),8# (,8#) 9,# ( 9,#) 8,1 ( 9,#),7 ( 8,#) 9,6# ( 9,6#) 9,6# ( 9,6#) 6,9 ( 8,#) 9,6# ( 9,6#) 9,6# ( 9,6#) 7,4 ( 8,4#) 9,6# ( 9,6#) 9,6# ( 9,6#) 8,4# ( 8,4#) 1,7# (1,7#) 11,1 (1,#) 7,6 (11,#), ( 8, ) 4, (,7#) 14,# (14,#) 1,# (1,#) 9, (11,4#) 6,7 ( 9,9#), (,9#) 14,7# (14,7#) 1,8# (1,8#) 9,8 (11,#) 7,1 (1,#), (6,#) 14,8# (14,8#) 1,8# (1,8#) 11,# (11,#) 9,1 (1,#) 6,# (6,#) 1, (,9#) 9,9 (1,4#) 7, (11,1 ),1 ( 8, ),8 (6, ) 18,8 (1,#) 1,1 (1,4#) 8,6 (1,4#) 6, (1, ) 4,8 (7,8 ) 19,8 (1,#) 1,8 (1,#) 9,1 (1,4#) 6,8 (1,#), (8,1#) 1,# (1,#) 1,# (1,#) 11,7 (1,4#) 8,7 (1,#) 6,8 (8,1#) 9,4# ( 9,4#) 8,8 (14,6 ) 6, (1,4 ) 4,8 ( 7,8 ),6 (6, ) 9,1# ( 9,1#) 1,9 (16,1#) 7,9 (1,7#) 6, ( 9,8 ) 4,6 (7,6 ) 8,9# ( 8,9#) 11,7 (16,1#) 8, (1,7#) 6,4 (1,4#), (8, ) 8,8# ( 8,8#) 1, (16,1#) 11, (1,7#) 8,4 (1,4#) 6,6 (8,7#) 6,9# ( 6,9#) 7,9 (1,7 ),8 ( 9,8 ) 4,4 ( 7,4 ), (,9 ) 6,9# ( 6,9#) 1,1 (16,#) 7,4 (1,4 ),7 ( 9,4 ) 4, (7,4 ) 6,9# ( 6,9#) 1,8 (16,#) 7,9 (1,6#) 6,1 (1,1 ) 4,8 (8, ) 6,9# ( 6,9#) 14,4 (16,#) 1, (1,6#) 8, (1,#) 6,4 (8,4#) 9,# ( 9,#) 7, (1, ), ( 9,4 ) 4, ( 7, ),4 (,8 ) 9,# ( 9,#) 9,7 (1,#) 7, (1, ),4 ( 9, ) 4,4 (7, ) 9,# ( 9,#) 1,4 (1,#) 7,6 (1,#),9 ( 9,7#) 4,8 (7,7#) 9,# ( 9,#) 1,9 (1,#) 1,1 (1,#) 7,8 ( 9,7#) 6, (7,7#) 11,7 (1,#) 7,4 (1,1 ),4 ( 9, ) 4, ( 7,1 ),4 (,8 ) 1,# (1,#) 9,6 (1,#) 6,9 (1,8#),4 ( 8,7#) 4,4 (6,#) 1,7# (1,7#) 1,4 (1,1#) 7, (1,8#),8 ( 8,6#) 4,8 (6,#) 1,7# (1,7#) 1,1# (1,1#) 1, (1,7#) 7,8 ( 8,6#) 6,# (6,#) 7,6 (1,6#),4 ( 8,9#) 4, ( 6,8#) 9,7 (1,#) 7, ( 8,8#), ( 6,7#) 1,4# (1,4#) 7,6 ( 8,7#),9 ( 6,6#) 1,4# (1,4#) 8,7# ( 8,7#) 6,6# ( 6,6#) The lift capacities on the load hook of the iebherr quick change adapter 66 without attachment are stated in metric tonnes (t), and can be lifted 6 on firm, level supporting surface. alues quoted in brackets are valid for the undercarriage when in longitudinal position. Capacities are valid for 6 mm wide triple grouser pads. Indicated loads are based on ISO 167 standard and do not exceed 7 % of tipping or 87 % of hydraulic capacity (indicated via #). Maximum load for the quick change adapter s load hook is 18 t. Without quick change adapter the lift capacities will increase by 4 kg, without bucket cylinder, link and lever they increase by an additional 9 kg. ifting capacity of the excavator is limited by machine stability, hydraulic capacity and maximum permissible load of the load hook. When lifting loads, the hydraulic excavator must be equipped with automatic check valve on its hoist cylinders, load diagram and overload warning device according to European Standard, EN R 944 C itronic Demolition Attachment

6 Dimensions E D A W C K Q P X U Z N S B G mm mm mm -D mm A C D E K P Q U S N B G Z Demolition Boom 9, m mm mm mm -D mm W X Demolition Boom 7, m mm mm mm -D mm W X E D A W C K Q P X U Z N S B G mm mm mm -D mm A C D E K P Q U S N B G Z Stick engths -D m mm mm mm mm, , , W, ,6 9, X, , , R 944 C itronic Demolition Attachment

7 Dimensions and Weights Basic machine with counterweight, fixed cab and integral protection grid Undercarriage -D Pad width mm mm mm Weight kg Basic machine without counterweight with fixed cab and integral protection grid Undercarriage -D Pad width mm mm mm Weight kg Basic machine with counterweight, fixed cab and integral protection grid Undercarriage -D Pad width mm mm mm Weight kg Basic machine with cab tiltable and integral protection grid Undercarriage -D Pad width mm mm mm Weight kg Basic machine with cab tiltable and integral protection grid on tilting device Undercarriage -D Pad width mm mm mm Weight kg R 944 C itronic Demolition Attachment 7

8 Dimensions and Weights Counterweight removable ength mm 97 eight mm 84 Width mm 98 Weight kg 8 Demolition Attachment with Support Demolition Boom 9, m ength mm 11 eight mm 1 mm 6 Width mm 4 Weight without working tool kg 17 Demolition Boom 7, m ength mm 81 eight mm 1 mm 7 Width mm 4 Weight without working tool kg 97 Demolition Attachment with Storage Rack with Catwalks Demolition Boom 9, m ength mm 117 eight mm 4 mm 96 Width mm Weight without working tool kg 16 Demolition Boom 7, m ength mm 9 eight mm 4 mm 7 Width mm Weight without working tool kg 11 Backhoe Attachment with Supports Main Boom 4, m Stick lengths m,1,6, ength mm eight mm mm Width mm Weight with quick change adapter kg Backhoe Attachment with Storage Rack with Catwalks Main Boom 4, m Stick lengths m,1,6, ength mm eight mm mm Width mm Weight with quick change adapter kg R 944 C itronic Demolition Attachment

9 Choice of Cab Elevations F F1 ersion tiltable with integral protection grid Undercarriage -D C1 C C mm C1 mm F1 mm F mm F F1 ersion tiltable with integral protection grid on tilting device Undercarriage -D C1 C C mm C1 mm F1 mm F mm R 944 C itronic Demolition Attachment 9

10 The iebherr Group of Companies Wide Product Range The iebherr Group is one of the largest construction equipment manufacturers in the world. iebherr s high value products and services enjoy a high reputation in many other fields. The wide range includes domestic appliances, aerospace and transportation systems, machine tools and maritime cranes. Exceptional Customer Benefit Every product line provides a complete range of models in many different versions. With both their technical excel lence and acknowledged quality, iebherr products offer a maximum of customer benefits in practical application. State-of-the-art Technology To provide consistent, top quality products, iebherr attaches great importance to each product area, its components and core technologies. Important modules and components are developed and manufactured in house, for instance the entire drive and control techno logy for construction equipment. Worldwide and Independent ans iebherr founded the iebherr family company in Since that time, the enterprise has steadily grown to a group of more than 1 companies with over 8, employees located on all continents. The corporate headquarters of the Group is iebherr International AG in Bulle, Switzerland. The iebherr family is the sole owner of the company. Printed in Germany by Schirmer RG-BK-RP FR/SP _enGB All illustrations and data may differ from standard equipment. Subject to change without notice. All indicated loads are based in accordance with ISO 948. iebherr-france SAS avenue Joseph Rey, B.P. 987, FR-68 Colmar Cedex , Fax info.lfr@liebherr.com