How Tough Does A Sensor Have To Be? 6 Namco 20 West Meeting Street Lancaster, SC 29720-80-286-849 FAX: -800-678-626
No Matter How Tough Your Electronic Sensor Has to Be, If It s a Namco, It s Covered by a Lifetime Replacement Program A Lifetime Product Replacement Program That Makes Sense All Namco self-contained, fully solid state proximity sensors and photoelectric switches are covered by a lifetime replacement program. Both our standard as well as our Weld Field Immune products are included. Namco had the very first lifetime warranty for sensor users back in 987. This program was originally offered to very large users of our Weld Field Immune sensors. We have such confidence in our products, that this same protection has now been extended to all users of our non-contact, fully electronic sensors. And, all that s required is the registration of your facility every three () years, not individual registration of each sensor you purchase. The Namco Pledge All Namco self-contained, fully encapsulated, solid state proximity and photoelectric sensors, and device network products that have been specified by a Registered User and that have been applied and used within those products specifications and ratings will have the warranty of specified products supplied on the Program equipment extended from one () year to The Life of the Equipment. Life is as long as that equipment remains at the original installation site and continues to produce the product for which it was originally installed. See Conditions of Sale paragraph 7, Warranty Limitations and Exclusions, for limitations of warranty. Electronic sensors require no periodic maintenance, other than maintaining mounting and interconnections. Sensors must be used within their stated ratings. See I&O sheet packaged with each sensor. Protected by the Lifetime Replacement Program 20 West Meeting Street Lancaster, SC 29720-80-286-849 FAX: -800-678-626 namcocontrols.com For technical assistance, call -800-NAMTECH 7
Official Lifetime Replacement Program Registration ) Read carefully the Lifetime Replacement Program details on he following page. 2) Fill-in this Registration Form completely. All questions must be answered to qualify. ) Fax this page to Namco. 4) That s all that is required for your facility to become registered for a -year period. Renewal forms will be mailed automatically after years. Please Print or Type Date End User Company/Corporation Division/Subsidiary Plant/Department Your Name Title Mailing Address: Address City State Zip Shipping Address: Address City State Zip Phone List the individual responsible for the following functions at your Plant/Department. Engineering Maintenance Procurement Manufacturing What is the product and/or service produced at your facility? Does your facility have a plant specification for sensors? Yes No Is Namco preferred approved used Method used to approve new sensors: Who at your facility decides what sensors will be used? Namco Sensors in use at this plant/facility: ET Series EE Series WFI PB Series ProxBlox Sensor Wiring Systems ER Series HMD's, Flow Sensors, Long Range Prox EP Series Photoelectric Sensors Other Signed 8 Namco 20 West Meeting Street Lancaster, SC 29720-80-286-849 FAX: -800-678-626
Lifetime Replacement Program Conditions I. Conditions of Sale For Conditions of Sale see back page of this catalog. II. General Conditions for Warrantee WARRANTIES; LIMITATIONS AND EXCLUSIONS. Seller warrants products manufactured by it to be free from defects in materials and workmanship for a period of one (l) year from date of shipment to purchaser. If within this period any such products shall be proved to Seller s reasonable satisfaction to be so defective, they shall be repaired or replaced at Seller s option. This warranty shall not apply to, (a) products not manufactured by Seller, (b) products which shall have been repaired or altered by others than Seller so as, in its judgment, to affect same adversely, (c) products which shall have been subjected to negligence, accident or damage by circumstances beyond Seller s control, or to improper operation, maintenance or storage, or to other than normal use or service with respect to products not manufactured by Seller, the warranty obligations of Seller shall conform to the warranty actually extended to Seller by its suppliers subject to the limitations and exclusions hereafter stated. The foregoing warranties do not cover reimbursement for transportation, removal, installation, or other expenses which may be incurred in connection with repair or replacement. Except as may be expressly provided in the authorized writing by Seller, Seller shall not be subject to any other obligations or liabilities whatsoever with respect to products manufactured by Seller or services rendered by Seller. THE FOREGOING WARRANTIES ARE EXCLUSIVE AND IN LIEU OF ALL OTHER EXPRESS AND IMPLIED WARRANTIES EXCEPT WAR- RANTIES OF TITLE, INCLUDING BUT NOT LIMITED TO WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. Anything to the contrary herein contained notwithstanding, SELLER SHALL NOT BE LIABLE FOR ANY CONSEQUENTIAL, CONTINGENT OR INCIDENTAL DAMAGES WHATSOEVER. III. Lifetime Replacement Program A. All Namco self-contained fully encapsulated solid state proximity sensors, photoelectric sensors and sensor network products that have been specified by a Registered End User and that have been applied and used within the product's stated specifications and ratings, will have the warranty of specified products, installed in the End User s facility, extended from one (l) year to the Life of the Equipment on which specified products are originally installed. B. Life - Life is as long as the equipment on which specified products are originally installed remains at the original installation site and continues to produce the End User product for which that equipment was originally installed. C. Covered Products - All inductive and capacitive proximity sensors, photoelectric sensors, and sensor network products that are totally solid state, and that have been applied and used within the products stated specifications and ratings and that have a production date code of 987 or later (995 or later for sensor network products) are included. Specifications and ratings are listed on I/O sheet, packaged with each sensor. D. Excluded Products - All products not specifically covered in paragraph III, C, including but not limited to mechanical switches, control modules, and sensors that include mechanical relays are not covered by this program. Also excluded are products that have been applied and/or used outside their specifications and ratings, and products that have been damaged in use. This Program also excludes coverage of the functional content and performance of embedded software ("firmware"), or its compatibility with software-based products from other manufacturers. E. Damaged Products Excluded - Products damaged due to physical impact, exposed to environmental conditions outside stated ratings, subjected to loads and power sources outside stated ratings, subjected to continuous or excessive vibration and movement of the sensor or connecting cable, and any other damage caused in the application and use, are specifically excluded from coverage. F. Determination of Cause - Any product(s) returned to Namco for repair or replacement under this program will be subjected to inspection and test at Namco s facility. Determination of cause for any loss of function of returned products will be at Namco s sole discretion. G. Method of Registration - Complete and return to Namco the postage paid Lifetime Replacement Program Registration form, publication SD/HT. All information requested must be provided. Registration is on a facility by facility basis. Large, multi-plant facilities must have each plant registered separately. Registration will last for three () years. A renewal registration form will be mailed automatically in January or July prior to third year anniversary and if returned within 0 days coverage will be renewed for the next three () years without interruption. H. Return of Products - To return products covered under this program contact Namco Controls Customer Service Department (26) 460-60 FAX (26) 460-800 and request an RGA (Return Goods Authorization) or contact your local Namco Representative. Package products securely to prevent damage in shipment including the RGA packing slip and follow instructions on RGA form. Returned products will be processed generally within two (2) weeks following receipt by Namco. Returned products will be repaired or replaced if covered under this program. Products that are found to meet stated specifications and/or damaged and Excluded Products will be returned to the End User. I. Method of Replacement - Any returned product covered under this program will be replaced free of charge with an equal or equivalent sensor. Namco reserves the right to make replacement with the latest design for the returned product or to substitute any equivalent function sensor in case of nonavailability or obsolescence of the exact model and type being returned. IV. Application Assistance Namco Sales Representatives are available to assist with the application and selection of Namco products. Additional assistance is available by calling the Namco Application Hotline: -800-NAMTECH Refer to Installation and Operation Sheet(s) packaged with each unit for specifications and ratings. Follow all recommended procedures for installation. WARNING A SWITCH IN A PROTECTIVE INTERLOCKING CIRCUIT SHOULD BE USED WITH AT LEAST ONE OTHER DEVICE THAT WILL PROVIDE A REDUNDANT PROTECTIVE FUNCTION, AND THE CIRCUIT SHOULD BE SO ARRANGED THAT EITHER DEVICE WILL INTERRUPT THE INTENDED OPERATION OF THE CONTROLLED EQUIPMENT. SERVICING ENERGIZED INDUSTRIAL CONTROL EQUIPMENT CAN BE HAZARDOUS, SEVERE INJURY OR DEATH CAN RESULT FROM ELECTRICAL SHOCK, BURN OR UNINTENDED ACTUATION OF CONTROLLED EQUIPMENT. RECOMMENDED PRACTICE IS TO DISCONNECT AND LOCK OUT CONTROL EQUIPMENT FROM POWER SOURCES, AND DISCHARGE STORED ENERGY TO CAPACITORS, IF PRESENT. IF IT IS NECES- SARY TO WORK IN THE VICINITY OF ENERGIZED EQUIPMENT, ONLY QUALIFIED PERSONNEL SHOULD BE PERMITTED TO PERFORM SUCH WORK, USING ALL APPLICABLE SAFETY PRACTICES AND PROTECTIVE EQUIPMENT. 20 West Meeting Street Lancaster, SC 29720 Refer to NFPA -80-286-849 70B, RECOMMENDED FAX: -800-678-626 PRACTICE FOR namcocontrols.com ELECTRICAL EQUIPMENT MAINTENANCE, published by the National Fire Protection Association, for additional information. For technical assistance, call -800-NAMTECH 9
Contents WFI Cylindicator Sensors: LPR (,000psi & 5,000psi) Cylindicator Sensors... 2- Low Profile Cylindicator Sensors... 4-5 90 Cylindicator Sensors... 6-7 C2 Cylindicator Sensors... 8-9 Tandem Low Profile Power Clamp Kit... 0- C2000 Power Clamp Sensor Types 9, 92 & 9... 2- DuraProx WFI : DuraProx 9-Way... 4-7 8mm DuraProx Hardcoat Tubulars... 8-9 0mm DuraProx Hardcoat Tubulars... 20-2 WFI Tubular and Rectangular Sensors: Hammerhead 9-Way... 22-2 Rotatable Rectangular... 24-25 Thermoset Rectangular... 26-27 2mm and 8mm Hardcoat Tubulars... 28-29 0mm Hardcoat Tubulars... 0- WFI Long Range Sensors: Focus Field Flatpak... 2-5 Extended Range... 6-7 WFI Sensor Accessories - Brackets, Etc.:... 8-4 Reference Information: Principles of Operation... 42-45 Cylindicator Sensors Design Guide... 46-47 20 West Meeting Street Lancaster, SC 29720-80-286-849 FAX: -800-678-626 www.namcocontrols.com For technical assistance, call -800-NAMTECH
Weld Field Immune LPR Cylindicator Sensors DC AC/DC Both,000 and 5,000 PSI Pressure Ratings Weld Field and Electrical Noise Immunity Standard Latching Short Circuit Protection (SCP) Non-latching Available in DC Models Predictable, Consistent Electrical Performance 00% Tested and Burned-in Purpose-Designed Housings and Materials For over 25 years, the Cylindicator sensor has been the standard for industrial applications that require end-ofstroke indication on Hydraulic and Pneumatic Cylinders. Available in both,000 and 5,000 PSI pressure ratings, they are the standard for many OEM cylinder manufacturers. All Cylindicators are completely PLC compatible with many output configurations, including a UL Listed Intrinsically Safe version (see EE9 series for details). LPR 000 (,000 PSI) -pin Micro, N.O. -pin Mini, N.O. 4-pin Mini, N.O. 4-pin Euro, N.O. 2-wire, 20-20V, AC/DC 2-wire, 20-20V, AC/DC -wire, 0-0V DC, Sourcing (PNP) -wire, 0-0V DC Sourcing (PNP) Probe Latching SCP Latching SCP 0µA leakage current 0µA leakage current Length.7mA leakage current.7ma leakage current 4.5mA leakage current Latching SCP Non-Latching SCP Latching SCP Non-Latching SCP.025 EE20-042 EE20-0420 EE260-0420 EE20-0440 EE20-0400 EE20-0444 EE20-0404.250 EE20-2 EE20-20 EE260-20 EE20-40 EE20-00 EE20-44 EE20-04.500 EE20-22 EE20-220 EE260-220 EE20-240 EE20-200 EE20-244 EE20-204.750 EE20-2 EE20-20 EE260-20 EE20-40 EE20-00 EE20-44 EE20-04 2.062 EE20-872 EE20-8720 EE260-8720 EE20-8740 EE20-8700 EE20-8744 EE20-8704 2.875 EE20-782 EE20-7820 EE260-7820 EE20-7840 EE20-7800 EE20-7844 EE20-7804.775 EE20-902 EE20-9020 EE260-9020 EE20-9040 EE20-9000 EE20-9044 EE20-9004 4.560 EE20-862 EE20-8620 EE260-8620 EE20-8640 EE20-8600 EE20-8644 EE20-8604 LPR 5000 (5,000 PSI) -pin Micro, N.O. -pin Mini, N.O. 4-pin Mini, N.O. 4-pin Euro, N.O. 2-wire, 20-20V, AC/DC 2-wire, 20-20V, AC/DC -wire, 0-0V DC, Sourcing (PNP) -wire, 0-0V DC Sourcing (PNP) Probe Latching SCP Latching SCP 0µA leakage current 0µA leakage current Length.7mA leakage current.7ma leakage current 4.5mA leakage current Latching SCP Non-Latching SCP Latching SCP Non-Latching SCP.025 EE20-0427 EE20-0425 EE260-0425 EE20-0445 EE20-0405 EE20-0446 EE20-0406.250 EE20-27 EE20-25 EE260-25 EE20-45 EE20-05 EE20-46 EE20-06.500 EE20-227 EE20-225 EE260-225 EE20-245 EE20-205 EE20-246 EE20-206.750 EE20-27 EE20-25 EE260-25 EE20-45 EE20-05 EE20-46 EE20-06 2.062 EE20-8727 EE20-8725 EE260-8725 EE20-8745 EE20-8705 EE20-8746 EE20-8706 2.875 EE20-7827 EE20-7825 EE260-7825 EE20-7845 EE20-7805 EE20-7846 EE20-7806.775 EE20-9027 EE20-9025 EE260-9025 EE20-9045 EE20-9005 EE20-9046 EE20-9006 4.560 EE20-8627 EE20-8625 EE260-8625 EE20-8645 EE20-8605 EE20-8646 EE20-8606 Consult factory for Normally Closed and DC Sinking model availability. Protected by the Lifetime Replacement Program 2 Namco 20 West Meeting Street Lancaster, SC 29720-80-286-849 FAX: -800-678-626
Common Sensor Characteristics CYLINDICATOR SENSORS AC/DC Nominal Sensing Range (±0%) 0.080" Current Consumption.7 or 4.5mA 0mA Voltage Drop ³0 VAC 2.0V@00mA Temperature Drift (Max.) ±0% Short Circuit Protection yes Reverse Polarity Protected yes Ambient Temperature Range -4 F to +58 F Maximum Switching Frequency 6Hz Hysteresis -0% Repeatability <±.25% Designed to meet NEMA Enclosure Type 4, 6, 2 & Load Current 5mA to 500mA 200mA max. LED Indicator red = power green = power green = target amber = target Shipping Weight 2 oz. See Cylindicator Sensor Design Guide Section for details. LED Functions 0-0V DC 20-20V AC/DC Green Amber Red Green Power Off Off Off Off Off DC Dimensional Drawings LOW PROFILE ROTATABLE LED's Top View Mini connector shown.7" (4.8) 0.47" (2.0) ÒLÓ DESIGNATES PROBE LENGTH Circuit Drawings EURO CONNECTOR MODELS 2 Wire DC N.O. 4 DC, AC/DC (+ DC) (- DC) Side View.55" (MINI) (9.4) Male view shown 0.90" (22.5) (2) /4"- 20 X 5/8" (5.68) SOC HD CAP SCREWS SUPPLIED Power On Load De-energized On Off On Off Power On Load Energized On On Off On MICRO CONNECTOR MODELS 2 Wire AC/DC N.O. Male view shown *SCP Mode Activated Both Flashing Both Flashing *Short Circuit Protection: If the sensor is shorted, the sensor s Short Circuit Protection (SCP) will be activated. When this occurs, both LEDs will flash and the sensor will limit current flow to about 2.0mA. 2 GND L Probe Length.025 Blue.250 White.500 White.750 White 2.062 Red Color Dot 2.875 Orange.775 Silver 4.560 Gold MINI CONNECTOR MODELS Wire DC N.O. 4 2 (+ DC) (- DC) Male views shown 2 Wire AC/DC N.O. 2 L 20 West Meeting Street Lancaster, SC 29720-80-286-849 FAX: -800-678-626 www.namcocontrols.com For technical assistance, call -800-NAMTECH
Weld Field Immune Low-Profile Cylindicator Sensors DC AC/DC Weld Field and Electrical Noise Immunity 500 PSI Continuous Pressure Rating Standard Latching Short Circuit Protection (SCP), Non-Latching Available in DC Models Predictable, Consistent Electrical Performance 00% Tested and Burned-in Purpose-Designed Housings and Materials For over 25 years, the Cylindicator sensor has been the standard for industrial applications that require end-of-stroke indication on Hydraulic and Pneumatic Cylinders. Available in several styles, they are the standard for many OEM cylinder manufacturers. All Cylindicators are completely PLC compatible with many output configurations, including a UL Listed Intrinsically Safe version (see EE9 series for details). -Pin Micro Connector 2-W, 20-20V, AC/DC, N.O. 4-Pin Euro Connector -W, 0-0V, DC Sourcing (PNP), N.O. Latching Short-Circuit Protection (SCP) Non-Latching SCP.7mA 4.5mA 0µA Leakage Current Leakage Current Leakage Current Probe EE20- EE260- EE20- EE20- Length 0.95 EE20-28820 EE260-28820 EE20-28844 EE20-28804 0.950 EE20-2020 EE260-2020 EE20-2044 EE20-2004.025 EE20-20420 EE260-20420 EE20-20444 EE20-20404.0 EE20-2020 EE260-2020 EE20-2044 EE20-2004.250 EE20-220 EE260-220 EE20-244 EE20-204.50 EE20-2720 EE260-2720 EE20-2744 EE20-2704 2.062 EE20-28720 EE260-28720 EE20-28744 EE20-28704 2.775 EE20-27420 EE260-27420 EE20-27444 EE20-27404 2.875 EE20-27820 EE260-27820 EE20-27844 EE20-27804.775 EE20-29020 EE260-29020 EE20-29044 EE20-29004 4.560 EE20-28620 EE260-28620 EE20-28644 EE20-28604 Protected by the Lifetime Replacement Program Consult factory for Normally Closed, DC Sinking, and Cable model availability. 4 Namco 20 West Meeting Street Lancaster, SC 29720-80-286-849 FAX: -800-678-626
Common Sensor Characteristics CYLINDICATOR SENSORS AC/DC Nominal Sensing Range (±0%) 0.080" Current Consumption.7 or 4.5mA 0µA Voltage Drop 0 VAC 2.0V@00mA Temperature Drift (Max.) ±0% Short Circuit Protection yes Reverse Polarity Protected yes Ambient Temperature Range -4 F to +58 F Maximum Switching Frequency 6Hz Hysteresis -0% Repeatability <±.25% Designed to meet NEMA Enclosure Type 4, 6, 2 & Load Current 5mA to 500mA 200mA max. LED Indicator red = power green = power green = target amber = target Shipping Weight 2 oz. See Cylindicator Sensor Design Guide Section for details. DC Dimensional Drawings LOW PROFILE 2.2" (59.0).77" (45.0) LED S READY Top View 500 PSI TARGET PROBE MUST BE MOUNTED IN GROUNDED CYLINDER 0.47" (2.0) 0.55" (4.0) 0.98" (25.0) DC, AC/DC Side View.8" (5.0) 2.40" (6.0) 0.4" (.0) 0.9" (0.0) LED Functions 0-0V DC 20-20V AC/DC Green Amber Red Green Power Off Off Off Off Off Power On Load De-energized On Off On Off Power On Load Energized On On Off On *SCP Mode Activated Both Flashing Both Flashing *Short Circuit Protection: If the sensor is shorted, the sensor s Short Circuit Protection (SCP) will be activated. When this occurs, both LEDs will flash and the sensor will limit current flow to about 2.0mA. Circuit Drawings EURO CONNECTOR MODELS 2 MICRO CONNECTOR MODELS Wire DC N.O. 4 2 Wire AC/DC N.O. Male view shown (+ DC) (- DC) Male view shown GND 2 L 20 West Meeting Street Lancaster, SC 29720-80-286-849 FAX: -800-678-626 www.namcocontrols.com For technical assistance, call -800-NAMTECH 5
Weld Field Immune 90 Rotatable Cylindicator Sensors DC AC/DC Weld Field and Electrical Noise Immunity 000 PSI Pressure Rating Standard Latching Short Circuit Protection (SCP), Non-Latching Available in DC Models Predictable, Consistent Electrical Performance 00% Tested and Burned-in Purpose-Designed Housings and Materials -Pin Mini 2-W, 20-20V AC/DC, N.O. For over 25 years, the Cylindicator sensor has been the standard for industrial applications that require end-of-stroke indication on Hydraulic and Pneumatic Cylinders. Available in several styles, they are the standard for many OEM cylinder manufacturers. All Cylindicators are completely PLC compatible with many output configurations, including a UL Listed Intrinsically Safe version (see EE9 series for details). 4-Pin Mini* -Wire, 0-0V DC, N.O., 0µA Leakage Current Latching SCP Non-Latching SCP Latching SCP.7mA 4.5mA SI (NPN) SO (PNP) SI (NPN) SO (PNP) SI/SO* Leakage Leakage Current Current Protected by the Lifetime Replacement Program Probe EE20 EE260 EE20- EE20- EE20- EE20- EE20- Length 0.95 EE20-8820 EE20-8800 EE20-8860 EE20-8840 EE20-8880 0.950 EE20-020 EE260-020 EE20-020 EE20-000 EE20-060 EE20-040 EE20-080.025 EE20-0420 EE260-0420 EE20-0420 EE20-0400 EE20-0460 EE20-0440 EE20-0480.050 EE20-0520 EE260-0520 EE20-0520 EE20-0500 EE20-0540.25 EE20-0820 EE260-0820 EE20-0820 EE20-0800 EE20-0860 EE20-0840 EE20-0880.50 EE20-0920 EE260-0920.225 EE20-220 EE20-200 EE20-240.250 EE20-20 EE260-20 EE20-20 EE20-00 EE20-60 EE20-40 EE20-80.275 EE20-420 EE260-420.295 EE20-520 EE260-520 EE20-520 EE20-500 EE20-560 EE20-540 EE20-580.50 EE20-720 EE260-720 EE20-740.400 EE20-920 EE20-920 EE20-960 EE20-940 EE20-980.475 EE20-2220 EE260-2220.500 EE20-220 EE260-220 EE20-220 EE20-200 EE20-240 EE20-280.525 EE20-2420.625 EE20-2820.725 EE20-220 EE260-220 EE20-220 EE20-200 EE20-260 EE20-240 EE20-280.750 EE20-20 EE260-20 EE20-00 EE20-40 EE20-80.875 EE20-820 EE260-820 EE20-820 EE20-800 EE20-860 EE20-840 EE20-880 2.062 EE20-8720 EE260-8720 EE20-8720 EE20-8700 EE20-8760 EE20-8740 EE20-8780 2.25 EE20-4820 EE260-4820 EE20-4820 EE20-4800 EE20-4860 EE20-4840 EE20-4880 2.275 EE20-5420 EE260-5420 EE20-5420 EE20-5400 EE20-5460 EE20-5440 EE20-5480 2.75 EE20-5820 2.775 EE20-7420 EE260-7420 2.875 EE20-7820 EE260-7820 EE20-07820 EE20-7800 EE20-7860 EE20-7840 EE20-7880.750 EE20-920.775 EE20-9020 EE260-9020 EE20-9000 EE20-9040 4.560 EE20-8620 EE260-8620 EE20-8620 EE20-8660 EE20-8640 EE20-8680 4.850 EE20-8920 EE260-8920 EE20-8920 EE20-8900 EE20-8960 EE20-8980 4.990 EE20-8520 EE20-8520 EE20-8500 EE20-8560 EE20-8580 * Sink/Source Combination Devices Use a 5-Pin, 4-Wire Connector! Consult factory for Normally Closed, DC Sinking, and Cable model availability. 6 Namco 20 West Meeting Street Lancaster, SC 29720-80-286-849 FAX: -800-678-626
Common Sensor Characteristics CYLINDICATOR SENSORS AC/DC DC Dimensional Drawings 90 ROTATABLE DC, AC/DC Nominal Sensing Range (±0%) 0.080" Current Consumption.7 or 4.5mA 0µA Top View Side View Voltage Drop 0 VAC 2.0V@00mA Temperature Drift (Max.) ±0% Short Circuit Protection yes Reverse Polarity Protected yes Ambient Temperature Range -4 F to +58 F Maximum Switching Frequency 6Hz Hysteresis -0% Repeatability <±.25% Designed to meet NEMA Enclosure Type 4, 6, 2 & Load Current 5mA to 500mA 200mA max..58" (40.) READY SCP.8" (5.0) MAX PRESS 000 PSI CYLINDICATOR 2.0" (58.4).00" (76.2) MENTOR OHIO USA LED S.7" (44.0).09" (27.7).75" (44.4) 0.59" (5.0) PROBE LENGTH (SEE CHART) (2) /4-20 X /4" SOC HD CAP SCREWS SUPPLIED 0.50" (2.7).8" (5.0) LED Indicator red = power green = power green = target amber = target Shipping Weight 2 oz. See Cylindicator Sensor Design Guide Section for details. Circuit Drawings MINI CONNECTORS (Male views shown) Wire DC N.O. 2 Wire AC/DC N.O. 4 2 (+ DC) 2 L (- DC) 4 Wire DC SI/SO N.O. 20 West Meeting Street Lancaster, SC 29720-80-286-849 FAX: -800-678-626 www.namcocontrols.com For technical assistance, call -800-NAMTECH 7
Weld Field Immune C2 Cylindicator Sensors DC AC/DC Low Mass - Less Susceptible to Damage from Shock and Vibration Lowest Profile Cylinder Sensor on the Market Weld Field and Electrical Noise Immunity 00 PSI Continuous Pressure Rating Single Piece Rugged Die-Cast Housing Tested to over 20 Million Switching Cycles Purpose-Designed Housings and Materials Standard Latching Short Circuit Protection (SCP), Non-Latching Available in DC Models As the leader in end-of-stroke cylinder position sensing for over 8 years, Namco is proud to introduce the newest member of the Namco Cylindicator series: the C2 Cylindicator sensor. Many developments in cylinder position sensing have resulted in sophisticated, overly-complicated sensors. The C2 sensor, on the other hand, is a back to basics design. This new design capitalizes on the real needs of the pneumatic power clamp cylinder user. -Pin Micro 4-Pin Euro 2-W, 20-50V AC/DC, N.O. -W, 0-0V DC, N.O., Sourcing (PNP).7mA Leakage Current 0µA Leakage Current Latching SCP Latching SCP Non-Latching SCP Probe EE20- EE20- EE20- Length.025" EE20-60420 EE20-60444 EE20-60404.250" EE20-620 EE20-644 EE20-604.500" EE20-6220 EE20-6244 EE20-6204.750" EE20-620 EE20-644 EE20-604 2.062 EE20-68720 EE20-68744 EE20-68704 2.875" EE20-67820 EE20-67844 EE20-67804.775" EE20-69020 EE20-69044 EE20-69004 4.560" EE20-68620 EE20-68644 EE20-68604 Accessories: see pages 84-87. Protected by the Lifetime Replacement Program 8 Namco 20 West Meeting Street Lancaster, SC 29720-80-286-849 FAX: -800-678-626
Common Sensor Characteristics C2 CYLINDICATOR SENSORS Nominal Sensing Range (±0%) 0.080" Dimensional Drawings C2 LOW PROFILE DC, AC/DC Supply Voltage 0-0V DC 20-50V AC/DC Voltage Drop < 2.5V @ 200mA < 2.0V @ < 00mA < 0V.9.8.56 Max. Load Current @ 25 C 200mA Inrush Current (rms Hz) -.5A.6 Leakage Current 0µA.7mA Max. Continuous Pressure 00 psi Response Time 0ms Power-up Time 5ms to 45ms Max. Switching Frequency 5Hz.00. 4 20 8 (2 ).74 Ambient Temp. Range -25 C to 70 C (- F to 58 F) LED Functions.50 0-0V DC 20-50V AC/DC Green Amber Red Green Power Off Off Off Off Off TYPICAL INSTALLATION Power On Load De-energized On Off On Off Power On Load Energized On On Off On *SCP Mode Activated Both Flashing Both Flashing *Short Circuit Protection: If the sensor is shorted, the sensor s Short Circuit Protection (SCP) will be activated. When this occurs, both LEDs will flash and the sensor will limit current flow to about 2.0mA. Circuit Drawings EURO CONNECTOR MODELS Wire DC N.O. Male view shown 2 (+ DC) 4 (- DC) MICRO CONNECTOR MODELS Male view shown 2 Wire AC/DC N.O. 2 GND L See pages 00-0 for Cylindicator Sensor Application Information. 20 West Meeting Street Lancaster, SC 29720-80-286-849 FAX: -800-678-626 www.namcocontrols.com For technical assistance, call -800-NAMTECH 9
Weld Field Immune Tandem Low Profile - Power Clamp Sensor Kit Cabling is Reduced 50% Cabling is Industry-Standard Micro Style Outputs Remain Independent - Power and Ground Connectors are Factory Interconnected Cable Terminations Reduced for Installer Cable Bundle Density Reduced Reduces Junction Box Size Reduces Fitting Size Reduces Panel Size The new Namco LP2 Tandem Low Profile Power Clamp Sensor Kit is an adaptation of our successful Low Profile Cylindicator sensor. This new version reduces the cabling necessary by 50% when two sensors are required on an air or hydraulic cylinder. The system consists of a new Low Profile Cylindicator sensor specially constructed as a common wiring point. Cabling is brought to the Master unit, then the built-in cable from the Master unit is connected to a standard Low Profile Cylindicator sensor. This eliminates 50% of the wiring density and labor required as compared to conventional practices. The LP2 sensor kit is the most cost effective, highest reliability solution for reducing sensor wiring complexity and cost in power clamp applications. Applications: Patented Weld Field Immune circuitry permits application within one inch of resistance welder tips carrying 20,000 Amperes. This system is ideal for end-of-stroke detection on hydraulic or pneumatic clamping cylinders in automotive assembly, metal fabricating, and general automated welding applications. Cylindicator is a registered trademark of Namco Controls Corporation. LP2 is a trademark of Namco Controls Corporation. Ordering Information Description Part No. Part No. 2-wire AC/DC -wire DC Standard LP2 Kit,.025" Probe EE270-20420 EE280-20446 Kit includes: Master Low Profile Cylindicator Sensor with pigtail interconnect EE270-2042 EE280-20447 Standard Low Profile Cylindicator Sensor EE20-20420 EE20-20444 Accessories: see pages 84-87. Protected by the Lifetime Replacement Program 0 Namco 20 West Meeting Street Lancaster, SC 29720-80-286-849 FAX: -800-678-626
Specifications LP2 POWER CLAMP SENSOR KIT Supply Voltage 0-0V DC 20-20V AC/DC Voltage drop 2.5V @ 200mA 2.0V@ 00mA 0V Max. Load Current @ 25 C 200mA 500mA Inrush Current (rms Hz) A Leakage Current 0µA.7mA Response Time 0ms Power-up Time 5ms to 45ms Max. Switching Frequency 5 Hz Ambient Temp. Range -20 C to 70 C Max. Continuous Pressure 500 PSI LED Functions 0-0V DC 20-20V AC/DC Green Amber Red Green Tandem Low Profile - Power Clamp Sensor Kit READY 000 TARGET PROBE MUST BE MOUNTED IN GROUNDED CYLINDER EE270-2 Power Off Off Off Off Off Power On Load De-energized On Off On Off Power On Load Energized On On Off On *SCP Mode Activated Both Flashing Both Flashing * Short Circuit Protection: If the sensor is shorted, the sensor's Short Circuit Protection (SCP) will be activated. When this occurs, both LED's will flash and the sensor will limit current flow to about 2.0mA. PROBE MUST BE MOUNTED IN GROUNDED CYLINDER READY TARGET 000 Wiring Diagram 2WAC/DC L (master sensor) Master Sensor Output Remote Sensor Output Gnd L (remote sensor) See page 79 for LP2 dimensions. WDC Remote Sensor Output + DC Master Sensor Output DC 20 West Meeting Street Lancaster, SC 29720-80-286-849 FAX: -800-678-626 www.namcocontrols.com For technical assistance, call -800-NAMTECH
For Power Clamps C2000 TM Cylindicator Sensor Kits Types 9, 92 & 9 Single cordset reduces wiring time and material costs as compared to two discrete sensors Two 0-0V, -wire DC WFI sensors, with non-latching Short Circuit Protection 00mm, 60mm or 200mm cable lengths available Cross-drilled hole pattern for mounting flexibility Rugged, fully encapsulated housings Status LED s indicate clamp position, viewable nearly 80 for mounting flexibility, easy troubleshooting Standard 4-pin euro connector The C200 Cylindicator sensors kits are designed to fit new enclosed style power clamps from major suppliers utilizing integral sensors. Kit senses both open and closed clamp positions All Namco WFI sensors pass the NEMA noise tests and exhibit no false turn-ons from walkie-talkies or other in-plant sources of RF Noise. C2000 Cylindicator Sensors - Types 9, 92 & 9 Description C2000 Type 9 0-0VDC, PNP, 4-pin, Euro Connector, 00mm Leads 0-0VDC, PNP, 4-pin, Euro Connector, 60mm Leads 0-0VDC, PNP, 4-pin, Euro Copnnector, 200mm Leads C2000 Type 92 0-0VDC, PNP, 4-pin, Euro Connector, 40mm Leads C2000 Type 9 0-0VDC, PNP, 4-pin, Euro Connector, 0mm Leads Part Number EE280-900 EE280-960 EE280-9200 EE280-9240 EE280-90 Consult factory for normally closed model availability. See page 89 for detailed description of standard WFI features. Accessories: see pages 84-87. Protected by the Lifetime R eplacement Program 2 Namco 20 West Meeting Street Lancaster, SC 29720-80-286-849 FAX: -800-678-626
Common Sensor Characteristics Supply Voltage R ipple 0% Sensing Range Current Consumption Voltage Drop Load Current No Load Current eakage Current Weld Field Immune/RF Immune Over Current Protection C2000 Type 9/92/9 Type 9/9 Type 92 0-0VDC < N/ A (Embeddable) 2.0mm (.08")±0% 2.0mm (.08")±0% 0mA 2.0V @ 00 ma 200mA max. (00mA ea.) L 0 200 ma max. < 0mA N/ A < µa µa 0 Yes Yes Protection Class IP67 Short Circuit Protection (SCP) Reverse Polarity Protection Response Time (On) Response Time (Off) Switching Frequency emperature Drift T ± % Hysteresis Connector perating Temperature O Range 5 Type 9/9 N/ A N/ A Yes Yes 0ms ms 50Hz 6Hz 5 ± 0% (max.) -8% typical, 5% -0% max. 4-pin single-key Euro - 2 C to +70 C LED Functions S Ready S2 Power/Ready Off Green Off.67 Dimensional Drawings C2000 - TYPE 9..2.26.7.79 C2000 - TYPE 92 Ø.206 (Ø5.2) 2 places.40 (5.8).60 (40.7).896.896 (22.8) (22.8) /2-20 Thd. for AC Micro/M2x 6g Thd. for DC Euro C2000 - TYPE 9 Type 9/92/9 00, 60, or 200mm cable length.44 (8.7).688 (7.4).69.709 (8).97 (5.0) Mounting Holes Ø.0 (Ø2.8).26 (6.0).256 (6.5).70.69.9.85 M2X THREAD.8 (.0).748 (9.0) Sensor #-Targeted Yellow Green Off.70 Sensor #2-Targeted Off Green Red Sensor # SCP Tripped Off Flashing Off.49.9 Sensor # 2 SCP Tripped Off Flashing Off Type 92 LED Functions -wire DC version Sensor Sensor 2 Mounting Holes (.208 dia.).9.85 M2X THREAD LED s.9 Ready S Ready S2 Power/Ready Green Off Green Off Sensor Targeted Green Yellow Green Off Sensor 2 Targeted Green Off Green Yellow 95mm cable length Sensor SCP Tripped Flash Off Flash Off Sensor 2 SCP Tripped Flash Off Flash Off Circuit Drawing EURO CONNECTOR MODELS Male view shown Wire DC N.O. 0mm cable length.9.45. dia..5 dia. - DC 4 2 S2 Output + DC S Output 20 West Meeting Street Lancaster, SC 29720-80-286-849 FAX: -800-678-626 www.namcocontrols.com For technical assistance, call -800-NAMTECH
Weld Field Immune DuraProx 9-Way Configurable DC AC/DC Introducing the Namco DuraProx Proximity Sensor: Evolution Means Survival of the Fittest. All Metal Body Stands up to Abuse To evolve means to adapt to your surroundings. The DuraProx sensor is completely enclosed in a rugged die-cast body. All metal means more strength in the face of abuse. 9-Way Position Flexibility Eight-point indexed side-sense, plus top sense configuration make the DuraProx sensor "9- sensors-in-one." Positive Grip Compression Clamp Bracket Provides superior mounting strength. 9x improvement,8 28,65 26,26 22,58 5,997 2,624 Standard Sensor Failed due to weld slag adhehesion after,66 Weld Cycles Namco DURAPROX Sensor after 28,000 Weld Cycles: Superior Resistance to Slag Build-Up and Adhesion,66,0,86 5,774 4 Std HH a Std HH b A wide range of materials were tested to determine optimal surface hardness and thermal characteristics necessary to survive the rigors of the automotive welding environment. Proven in independent laboratory testing, Namco DURAPROX survives weld-slag buildup UP TO 9 TIMES Namco 20 West Meeting Street Lancaster, SC 29720 LONGER -80-286-849 than standard FAX: proxes. -800-678-626 Std HH w/boot Proto a Proto b Proto 2a Proto 2b Proto a Proto b DuraProx
Streamlined Design Shakes off Weld Slag... Without Protective "Boots" The DuraProx sensor's face incorporates a proprietary high-temperature abrasion-resistant coating that is weld slag resistant, so even heavy deposits roll right off. Plus, because it has no nooks or crevices for slag to accumulate, you'll never have to worry about "false triggering" from slag build-up. Configuring is as easy as "-2-" The DuraProx sensor is fieldadaptable to positions for top, front, left or right sensing. This means you can siteadapt sensors to changing application conditions. 2 Adjustment screws go straight in... no difficult angles to slow things down. An Easy Upgrade. Directly Replaces Other Configurable Sensors Two sets of mounting holes on bracket allow easy retrofit of traditional rectangular sensors (using lower pair of holes), or retrofit of limit switch-style sensors (using the upper pair). Simplifies Ordering Because it is "9-sensors-in-one," the DuraProx sensor makes things easy for your Purchasing Department. A single part number replaces as many as five conventional rectangular proximity sensors. 60 Connector Swivel Allows for convenient cordset routing, especially with 90 cordsets. 20 West Meeting Street Lancaster, SC 29720-80-286-849 FAX: -800-678-626 www.namcocontrols.com For technical assistance, call -800-NAMTECH 5
Weld Field Immune DuraProx 9-Way Configurable DC AC/DC Designed to Survive the Toughest Automotive Welding Environments New Extended Range Versions 25mm Shielded / 5mm Unshielded Keeps the Sensor Out of Harm's Way Proprietary High-Temperature Abrasion- Resistant Coating on Sensing Face Patented Short Circuit Protection Covered by Namco Lifetime Replacement Program Rugged metal body and clamp bracket The DuraProx sensor is field-configurable to sense in nine different positions: top, front, back, left, right, and four 45 side sense positions. The DurProx sensor features Namco's famous weld field immune circuit proven reliable the world over in the harshest conditions. Totally epoxy encapsulated, the electronics are truly "automotive grade." Non-latching Latching Maximum Short Connector Circuit Housing SCP SCP Load Leakage Voltage Circuit Type Description Dimensions Model No. Model No. Current Current Drop Protected 5mm SENSING RANGE DC 0-0V (SHIELDED) 4-pin Mini W, PNP, NO 40x40x68.5mm EE50-9000 EE50-9040 200mA < 0µA.5V Yes 4-pin Euro W, PNP, NO 40x40x68.5mm EE50-9004 EE50-9044 200mA < 0µA.5V Yes 20mm SENSING RANGE DC 0-0V (SHIELDED) 4-pin Mini W, PNP, NO 40x40x68.5mm EE50-900 EE50-940 200mA < 0µA.5V Yes 4-pin Euro W, PNP, NO 40x40x68.5mm EE50-904 EE50-944 200mA < 0µA.5V Yes 25mm SENSING RANGE DC 0-0V (SHIELDED) 4-pin Mini W, PNP, NO 40x40x68.5mm EE50-900 EE50-940 200mA < 0µA.5V Yes 4-pin Euro W, PNP, NO 40x40x68.5mm EE50-904 EE50-944 200mA < 0µA.5V Yes 25mm SENSING RANGE DC 0-0V (UNSHIELDED) 4-pin Mini W, PNP, NO 40x40x68.5mm EE50-9200 EE50-9240 200mA < 0µA.5V Yes 4-pin Euro W, PNP, NO 40x40x68.5mm EE50-9204 EE50-9244 200mA < 0µA.5V Yes 5mm SENSING RANGE DC 0-0V (UNSHIELDED) 4-pin Mini W, PNP, NO 40x40x68.5mm EE50-9400 EE50-9440 200mA < 0µA.5V Yes 4-pin Euro W, PNP, NO 40x40x68.5mm EE50-9404 EE50-9444 200mA < 0µA.5V Yes 5mm SENSING RANGE AC/DC 20-50V (SHIELDED) -pin Mini 2W, NO 40x40x68.5mm EE50-9040 200mA.7mA 0V Yes -pin Micro 2W, NO 40x40x68.5mm EE50-9042 200mA.7mA 0V Yes 20mm SENSING RANGE AC/DC 20-50V (SHIELDED) -pin Mini 2W, NO 40x40x68.5mm EE50-940 200mA.7mA 0V Yes -pin Micro 2W, NO 40x40x68.5mm EE50-942 200mA.7mA 0V Yes 25mm SENSING RANGE AC/DC 20-50V (SHIELDED) -pin Mini 2W, NO 40x40x68.5mm EE50-940 200mA.7mA 0V Yes -pin Micro 2W, NO 40x40x68.5mm EE50-942 200mA.7mA 0V Yes 25mm SENSING RANGE AC/DC 20-50V (UNSHIELDED) -pin Mini 2W, NO 40x40x68.5mm EE50-9240 200mA.7mA 0V Yes -pin Micro 2W, NO 40x40x68.5mm EE50-9242 200mA.7mA 0V Yes 5mm SENSING RANGE AC/DC 20-50V (UNSHIELDED) -pin Mini 2W, NO 40x40x68.5mm EE50-9440 200mA.7mA 0V Yes -pin Micro 2W, NO 40x40x68.5mm EE50-9442 200mA.7mA 0V Yes Protected by the Lifetime Replacement Program 6 Namco 20 West Meeting Street Lancaster, SC 29720-80-286-849 FAX: -800-678-626
Common Sensor Characteristics DURAPROX SENSORS Operating Voltage Output Circuit Load Current Leakage Current No Load Current LED Indicators Voltage Drop Switching Speed Range Accuracy Temperature Range Temperature Drift Hysteresis Enclosure Type Mis-Wire Protected Short-Circuit Protected Weld Field Immune LED Functions 2-Wire AC/DC -Wire DC 20-50 VAC/DC 0-0 VDC 2-Wire PNP (Sourcing) 200mA 200mA <.7 ma @ 0VAC <0µ A < 6mA @ 24 VDC RED = POWER GREEN = POWER GREEN = TARGET AMBER = TARGET <0V @ 200ma <.5V @ 200mA 0 Hz 50 Hz ±0% -25 C to +70 C ±5% max. % - 8% typical, 5% max. IP67 YES YES YES 2 Wire AC/DC Wire DC Red Green Green Amber Power Off Off Off Off Off Power On Load De-energized On Off On Off Power On Load Energized Off On On On Dimensional Drawings DURAPROX SENSORS - MINI CONNECTORS Use /6 (#0) screws, not included, (2 places) to fasten mounting bracket to equipment Use ¼-20 x ¼ screw, place, (included) to clamp mounting bracket to sensor.575 (40mm).575 (40mm) 2.72 (69.mm) 2.65 (55mm) DC, AC/DC.97 (5mm).787 (20mm).787 (20mm).8 (0mm).94 (0mm) 0. (2.5mm).40 (4mm) *SCP Mode Activated Both Flashing Both Flashing *Short Circuit Protection: If the sensor is shorted, the sensor s Short Circuit Protection (SCP) will be activated. When this occurs, both LEDs will flash and the sensor will limit current flow to about 2.0mA. Namco 2-wire AC/DC sensors are bipolar by design - they cannot be miswired. 2 Namco -wire DC sensors incorporate reverse polarity protection..575 (40mm).8 (46mm) 2.62 (60mm) 2.559 (65mm).97 (5mm.94 (0mm Wiring Diagrams MINI CONNECTOR MODELS Wire DC N.O. Male views shown 2 Wire AC/DC N.O. 0. (2.5mm) 2 4 (+ DC) 2 L.40 (4mm) 7 m) (- DC) EURO CONNECTOR MODELS 2 Male view shown Wire DC N.O. (+ DC).97 (5mm).94 (0mm).8 (0mm).787 (20mm) 4 (- DC) MICRO CONNECTOR MODELS Micro 2-Wire AC N.O. Male view shown 2 Wire AC N.O. GND 2 L 20 West Meeting Street Lancaster, SC 29720-80-286-849 FAX: -800-678-626 www.namcocontrols.com For technical assistance, call -800-NAMTECH 7
Weld Field Immune DuraProx TM Hardcoat 8mm Tubular DC AC/DC Weld Field and Electrical Noise Immunity Standard Latching Short Circuit Protection (SCP), Non-Latching SCP available for DC models only Proprietary High-Temperature Abrasion- Resistant Coating on Sensing Face New Hardcoat housings are resistant to weld expulsion These sensors are specifically designed for extreme duty use in harsh applications (i.e., automotive fabrication, assembly plants, etc.). The tubular series is popular as part present and machine location sensors for demanding applications such as resistance welding of body assemblies. Namco s proprietary Hardcoat housings and high-temperature abrasion-resistant coating on sensing face resists weld slag build-up more than 0 TIMES LONGER than standard proxes. Maximum Maximum Switching Short Connector Circuit Housing Housing Shielded Unshielded Load Leakage Voltage Frequency Circuit Type Description Material Length Model No. Model No. Current Current Drop* Shielded Unshielded Protected 8mm WFI DC 0-0V DuraProx Hardcoat, 5mm (Shielded) and 8mm (Unshielded) Sensing Ranges) 4-pin Euro W, PNP, NO Metal-HC** 76mm EE50-744 EE50-7244 200mA 0µA 2 VDC @ 00mA6Hz 6Hz Latching 4-pin Euro W, PNP, NO Metal-HC** 76mm EE50-704 EE50-7204 200mA 0µA 2 VDC @ 00mA6Hz 6Hz Non-Latching 90 4-pin Euro W, PNP, NO Metal-HC** 67mm EE50-745 EE50-7245 200mA 0µA 2 VDC @ 00mA6Hz 6Hz Latching 90 4-pin Euro W, PNP, NO Metal-HC** 76mm EE50-705 EE50-7205 200mA 0µA 2 VDC @ 00mA6Hz 6Hz Non-Latching 4-pin Mini W, PNP, NO Metal-HC** 76mm EE50-740 EE50-7240 200mA 0µA 2 VDC @ 00mA6Hz 6Hz Latching 4-pin Mini W, PNP, NO Metal-HC** 76mm EE50-700 EE50-7200 200mA 0µA 2 VDC @ 00mA6Hz 6Hz Non-Latching 90 4-pin Mini W, PNP, NO Metal-HC** 67mm EE50-742 EE50-7242 200mA 0µA 2 VDC @ 00mA6Hz 6Hz Latching 90 4-pin Mini W, PNP, NO Metal-HC** 76mm EE50-702 EE50-7202 200mA 0µA 2 VDC @ 00mA6Hz 6Hz Non-Latching 8mm WFI AC/DC 20-20V DuraProx Hardcoat, 5mm (Shielded) and 8mm (Unshielded) Sensing Ranges) -pin Mini 2W, NO Metal-HC** 76mm EE50-740 EE50-7240 500mA.7mA <0V 6Hz 6Hz Latching -pin Mini 2W, NO Metal-HC** 76mm EE560-740 EE560-7240 500mA 4.5mA <0V 6Hz 6Hz Latching -pin Micro 2W, NO Metal-HC** 76mm EE50-74 EE50-724 500mA.7mA <0V 6Hz 6Hz Latching 90 -pin Mini 2W, NO Metal-HC** 67mm EE50-742 EE50-7242 500mA.7mA <0V 6Hz 6Hz Latching 90 -pin Mini 2W, NO Metal-HC** 67mm EE560-742 EE560-7242 500mA 4.5mA <0V 6Hz 6Hz Latching * Across conducting sensor ** Hard Coat: Weld spatter resistant *** Non-hardcoat versions Consult factory for normally closed model availability. See page 89 for detailed description of standard WFI features. Accessories: see pages 84-87. Protected by the Lifetime Replacement Program 8 Namco 20 West Meeting Street Lancaster, SC 29720-80-286-849 FAX: -800-678-626
Common Sensor Characteristics 8mm DIAMETER WFI SENSORS 8mm 2mm Shielded Sensing Range (±0%) 5mm 2mm Dimensional Drawings 8mm EURO CONNECTOR MODELS.6" (4.0) Shielded 8mm-WFI Body threads = M8x LED INDICATORS Unshielded Sensing Range (±0%) 8mm 4mm Short Circuit Protection yes yes Repeatability <±% Hysteresis -0%.4" (4.0) Unshielded 2.99" (76.0) Temperature Drift (max.) ±0% Ambient Temperature Range -4 F to +58 F Reverse Polarity Protected yes Current Consumption (-wire DC only) 0mA NEMA Enclosure Type,, 4, 6, LED Indicator (AC/DC) red = power, grn = target LED Indicator (DC) grn = pwr, Amber = target Metal Housings Weld Flash Proof Shipping Weight 4 oz..8" (5.0) Shielded.06" (27.0) Unshielded 8mm MINI CONNECTOR MODELS.6" (4.0) Shielded 2.64" (67.0) LED INDICATORS LED INDICATORS Circuit Drawings EURO CONNECTOR MODELS Wire DC N.O. Male view shown.4" (4.0) Unshielded 2.99" (76.0) 2 4 (+ DC).8" (5.0) Shielded LED INDICATORS (- DC) MINI CONNECTOR MODELS Wire DC N.O. Male views shown 2 Wire AC/DC N.O..06" (27.0) Unshielded 2.64" (67.0) GND 2 L MICRO CONNECTOR MODELS 2 Wire AC/DC N.O. Male view shown GND 2 L 20 West Meeting Street Lancaster, SC 29720-80-286-849 FAX: -800-678-626 www.namcocontrols.com For technical assistance, call -800-NAMTECH 9
Weld Field Immune DuraProx Hardcoat 0mm Tubular DC AC/DC Weld Field and Electrical Noise Immunity Standard Latching Short Circuit Protection (SCP), Non-Latching SCP available for DC models only. Dual LED indicators Predictable, consistent electrical performance Proprietary High-Temperature Abrasion- Resistant Coating on Sensing Face 00% tested & burned-in New Hardcoat housings are resistant to weld expulsion These sensors are specifically designed for extreme duty use in harsh applications (i.e., automotive fabrication, assembly plants, etc.). The tubular series is popular as part present and machine location sensors for demanding applications such as resistance welding of body assemblies. Namco s proprietary Hardcoat housings will not allow the hot weld expulsion to adhere to the housing. 0mm (Shielded) and 5mm (Unshielded) Sensing Range Maximum Maximum Switching Short Connector Circuit Housing Housing Shielded Unshielded Load Leakage Voltage Frequency Circuit Type Description Material Length Model No. Model No. Current Current Drop* Shielded Unshielded Protected WFI DC 0-0V 4-pin Euro W, PNP, NO Metal-HC 76mm EE50-7744 EE50-7644 200mA 0µA 2 VDC @ 00mA 6Hz 6Hz Latching 4-pin Mini W, PNP, NO Metal-HC 76mm EE50-7740 EE50-7640 200mA 0µA 2 VDC @ 00mA 6Hz 6Hz Latching 4-pin Euro W, PNP, NO Metal-HC 76mm EE50-7704 EE50-7604 200mA 0µA 2 VDC @ 00mA 6Hz 6Hz Non-Latching 4-pin Mini W, PNP, NO Metal-HC 76mm EE50-7700 EE50-7600 200mA 0µA 2 VDC @ 00mA 6Hz 6Hz Non-Latching WFI AC/DC 20-20V -pin Mini 2W, AC/DC, NO,LL Metal-HC 76mm EE50-7740 EE50-7640 500mA.7mA <0V 6Hz 6Hz Latching -pin Mini 2W, AC/DC, NO, HL Metal-HC 76mm EE560-7740 EE560-7640 500mA 4.5mA <0V 6Hz 6Hz Latching -pin Micro 2W, AC/DC, NO Metal-HC 76mm EE50-774 EE50-764 500mA.7mA <0V 6Hz 6Hz Latching * Across conducting sensor Consult factory for normally closed model availability. See page 89 for description of WFI features. Accessories: see pages 84-87. Protected by the Lifetime Replacement Program 20 Namco 20 West Meeting Street Lancaster, SC 29720-80-286-849 FAX: -800-678-626
Common Sensor Characteristics 0mm DIAMETER WFI SENSORS Shielded Sensing Range (±0%) 0mm Unshielded Sensing Range (±0%) 5mm Dimensional Drawings EURO/MICRO CONNECTOR MODELS.5" (8.4) Shielded 0mm-WFI Body threads = M0x.5 LED INDICATORS Short Circuit Protection yes Repeatability <±% Hysteresis -0% Range Drift over Temperature ±0% Operating Temperature Range -4 F to +58 F Reverse Polarity Protected yes Current Consumption (-wire DC only) 0mA NEMA Enclosure Type,, 4, 6, LED Indicator (AC/DC) red = pwr, green = target LED Indicator (DC) green = pwr, amber = target Metal Housings Weld Flash Proof Shipping Weight 5 oz..5" (29.2) Unshielded MINI CONNECTOR MODELS.69" (4.0) Shielded.0" (.0) Unshielded.00" (76.0).00" (76.0) LED INDICATORS Circuit Drawings EURO CONNECTOR MODELS Male view shown Wire DC N.O. 2 (+ DC) 4 (- DC) MICRO CONNECTOR MODELS Male view shown 2 Wire AC/DC N.O. GND 2 L MINI CONNECTOR MODELS 2 Wire AC/DC N.O. 2 GND L Male views shown Wire DC N.O. 4 2 (+ DC) (- DC) 20 West Meeting Street Lancaster, SC 29720-80-286-849 FAX: -800-678-626 www.namcocontrols.com For technical assistance, call -800-NAMTECH 2
Weld Field Immune HammerHead 9-Way Configurable DC AC/DC Nine-way position flexibility Weld Field Immune circuitry is designed to operate within " of a resistance welding electrode carrying 20,000 Amperes RMS (45,000 Amp. peak) without changing state Will not exhibit false turn-ons from walkietalkies or other in-plant sources of RF noise Patented Short Circuit Protection Covered by Namco Lifetime Replacement Program Rugged metal body and clamp bracket The HammerHead sensor is field-configurable to sense in nine different positions: top, front, back, left, right, and four 45 side sense positions. The HammerHead sensor features Namco's famous weld field immune circuit proven reliable the world over in the harshest conditions. Totally epoxy encapsulated, the electronics are truly "automotive grade." Non-latching Latching Maximum Short Connector Circuit Housing SCP SCP Load Leakage Voltage Circuit Type Description Dimensions Model No. Model No. Current Current Drop Protected 5mm SENSING RANGE DC 0-0V (SHIELDED) 4-pin Mini W, PNP, NO 40x40x68.5mm EE50-90000 EE50-90400 200mA < 0µA 2.5V Yes 4-pin Euro W, PNP, NO 40x40x68.5mm EE50-90040 EE50-90440 200mA < 0µA 2.5V Yes 20mm SENSING RANGE DC 0-0V (SHIELDED) 4-pin Mini W, PNP, NO 40x40x68.5mm EE50-9000 EE50-9400 200mA < 0µA 2.5V Yes 4-pin Euro W, PNP, NO 40x40x68.5mm EE50-9040 EE50-9440 200mA < 0µA 2.5V Yes 25mm SENSING RANGE DC 0-0V (SHIELDED) 4-pin Mini W, PNP, NO 40x40x68.5mm EE50-9000 EE50-9400 200mA < 0µA 2.5V Yes 4-pin Euro W, PNP, NO 40x40x68.5mm EE50-9040 EE50-9440 200mA < 0µA 2.5V Yes 25mm SENSING RANGE DC 0-0V (UNSHIELDED) 4-pin Mini W, PNP, NO 40x40x68.5mm EE50-92000 EE50-92400 200mA < 0µA 2.5V Yes 4-pin Euro W, PNP, NO 40x40x68.5mm EE50-92040 EE50-92440 200mA < 0µA 2.5V Yes 5mm SENSING RANGE DC 0-0V (UNSHIELDED) 4-pin Mini W, PNP, NO 40x40x68.5mm EE50-94000 EE50-94400 200mA < 0µA 2.5V Yes 4-pin Euro W, PNP, NO 40x40x68.5mm EE50-94040 EE50-94440 200mA < 0µA 2.5V Yes 5mm SENSING RANGE AC/DC 20-50V (SHIELDED) -pin Mini 2W, NO 40x40x68.5mm EE50-90400 200mA.7mA 0V Yes -pin Micro 2W, NO 40x40x68.5mm EE50-90420 200mA.7mA 0V Yes 20mm SENSING RANGE AC/DC 20-50V (SHIELDED) -pin Mini 2W, NO 40x40x68.5mm EE50-9400 200mA.7mA 0V Yes -pin Micro 2W, NO 40x40x68.5mm EE50-9420 200mA.7mA 0V Yes 25mm SENSING RANGE AC/DC 20-50V (SHIELDED) -pin Mini 2W, NO 40x40x68.5mm EE50-9400 200mA.7mA 0V Yes -pin Micro 2W, NO 40x40x68.5mm EE50-9420 200mA.7mA 0V Yes 25mm SENSING RANGE AC/DC 20-50V (UNSHIELDED) -pin Mini 2W, NO 40x40x68.5mm EE50-92400 200mA.7mA 0V Yes -pin Micro 2W, NO 40x40x68.5mm EE50-92420 200mA.7mA 0V Yes 5mm SENSING RANGE AC/DC 20-50V (UNSHIELDED) -pin Mini 2W, NO 40x40x68.5mm EE50-94400 200mA.7mA 0V Yes -pin Micro 2W, NO 40x40x68.5mm EE50-94420 200mA.7mA 0V Yes Protected by the Lifetime Replacement Program 22 Namco 20 West Meeting Street Lancaster, SC 29720-80-286-849 FAX: -800-678-626
Common Sensor Characteristics HAMMERHEAD SENSORS 2 Wire Wire AC/DC DC Supply Voltage 20-50V 0-0V Voltage Drop 0V 2.5V Max. Load Current 200mA 200mA Current Consumption N/A ma Leakage Current.7mA < 0µA Mis-wiring Protected Yes Yes 2 Response Time 0ms 0ms Output Circuit 2 Wire Sourcing Ambient Temperature Range -25 C to 70 C (- F to 58 F) LED Functions 2 Wire AC/DC Wire DC Red Green Green Amber Power Off Off Off Off Off Power On Load De-energized On Off On Off Power On Load Energized Off On On On Dimensional Drawings HAMMERHEAD SENSORS - MINI CONNECTORS Use /6 (#0) screws, not included, (2 places) to fasten mounting bracket to equipment Use ¼-20 x ¼ screw, place, (included) to clamp mounting bracket to sensor.575 (40mm).575 (40mm) 2.72 (69.mm) 2.65 (55mm) DC, AC/DC.97 (5mm).787 (20mm).787 (20mm).8 (0mm).94 (0mm) 0. (2.5mm).40 (4mm) *SCP Mode Activated Both Flashing Both Flashing *Short Circuit Protection: If the sensor is shorted, the sensor s Short Circuit Protection (SCP) will be activated. When this occurs, both LEDs will flash and the sensor will limit current flow to about 2.0mA. Namco 2-wire AC/DC sensors are bipolar by design - they cannot be miswired. 2 Namco -wire DC sensors incorporate reverse polarity protection..575 (40mm).8 (46mm) 2.62 (60mm) 2.559 (65mm).97 (5mm).94 (0mm Wiring Diagrams MINI CONNECTOR MODELS Wire DC N.O. Male views shown 2 Wire AC/DC N.O. 0. (2.5mm) 2 4 (+ DC) 2 L.40 (4mm) 7 m) (- DC) EURO CONNECTOR MODELS 2 Male view shown Wire DC N.O. (+ DC).97 (5mm).94 (0mm).8 (0mm).787 (20mm) 4 (- DC) MICRO CONNECTOR MODELS Micro 2-Wire AC N.O. Male view shown 2 Wire AC N.O. GND 2 L 20 West Meeting Street Lancaster, SC 29720-80-286-849 FAX: -800-678-626 www.namcocontrols.com For technical assistance, call -800-NAMTECH 2
Weld Field Immune Inductive Rotatable Rectangular DC AC/DC Weld Field and Electrical Noise Immunity Predictable, Consistent Performance 00% Tested and Burned-in New Ultra Long Range models in latching and non-latching 0.5"/.0" Range (Unshielded) Rotatable Sensors These sensors are specifically designed for extreme duty use in harsh applications such as automotive fabrication and assembly plants. The rectangular series has been the standard of the automotive industry for over 25 years. In that time several different versions, all with a common mounting, have been developed for use as part present and machine location sensors. In addition, specific accessories have been developed to make these sensors even more reliable in your application. Maximum Short Connector Circuit Front Top Load Leakage Voltage Circuit Inrush Type Description Sense** Sense Current Current Drop* Protected Current SHORT HOUSING DC 0-0V 0.5" Range 4-pin Euro W, PNP, NO EE50-5440 EE50-9440 200mA 0µA 2.0V @ 00mA Latching N/A 4-pin Euro W, PNP, NO EE50-5040 EE50-9040 200mA 0µA 2.0V @ 00mA Non-Latching N/A 4-pin Mini W, PNP, NO EE50-5400 EE50-9400 200mA 0µA 2.0V @ 00mA Latching N/A 4-pin Mini W, PNP, NO EE50-5000 EE50-9000 200mA 0µA 2.0V @ 00mA Non-Latching N/A SHORT HOUSING AC/DC 20-20V 0.5" Range -pin Mini 2W, NO, LL EE50-5400 EE50-9400 500mA.7mA <0V Latching A (20ms) -pin Micro 2W, NO, LL EE50-5420 EE50-9420 500mA.7mA <0V Latching A (20ms) LONG HOUSING DC 0-0V 0.5" Range 4-pin Euro W, PNP, NO EE50-0440 EE50-4440 200mA 0µA 2.0V @ 00mA Latching N/A 4-pin Euro W, PNP, NO EE50-0040 EE50-4040 200mA 0µA 2.0V @ 00mA Non-Latching N/A 4-pin Mini W, PNP, NO EE50-0400 EE50-4400 200mA 0µA 2.0V @ 00mA Latching N/A 4-pin Mini W, PNP, NO EE50-0000 EE50-4000 200mA 0µA 2.0V @ 00mA Non-Latching N/A 8' Cable W, PNP, NO EE50-045 EE50-445 200mA 0µA 2.0V @ 00mA Latching N/A 8' Cable W, PNP, NO EE50-005 EE50-405 200mA 0µA 2.0V @ 00mA Non-Latching N/A LONG HOUSING AC/DC 20-20V 0.5" Range -pin Mini 2W, NO, LL EE50-0400 EE50-4400 500mA.7mA <0V Latching A (20ms) -pin Micro 2W, NO, LL EE50-0420 EE50-4420 500mA.7mA <0V Latching A (20ms) LONG HOUSING DC 0-0V.0" Range 4-pin Euro W, PNP, NO EE50-0440 EE50-4440 200mA 0µA 2.0V @ 00mA Latching N/A 4-pin Euro W, PNP, NO EE50-0040 EE50-4040 200mA 0µA 2.0V @ 00mA Non-Latching N/A LONG HOUSING AC/DC 20-50V.0" Range -pin Mini 2W, NO, LL EE50-0400 EE50-4400 200mA.7mA <0V Latching.5A * Across conducting sensor ** Rotate for left or right sense. LL indicates Low Leakage Consult factory for normally closed and High Leakage model availability. See page 89 for detailed description of standard WFI features. Accessories: see pages 84-87. Protected by the Lifetime Replacement Program 24 Namco 20 West Meeting Street Lancaster, SC 29720-80-286-849 FAX: -800-678-626
Common Sensor Characteristics ROTATABLE INDUCTIVE RECTANGULAR SENSORS Nominal Sensing Range (±0%) 0.5"/.0"* Short Circuit Protection yes Repeatability <±% Hysteresis -0% Temperature Drift (max.) ±0% Ambient Temperature Range -4 F to +58 F Reverse Polarity Protected yes Current Consumption (-wire DC only) 0mA LED Indicator (AC/DC) red = pwr, green = target LED Indicator (DC) green = pwr, amber = target Housing Weld Flash Resistant Cable Type PVC Shipping Weight Connector model: 6 oz. Cable model: oz. Maximum Switching Frequency 6Hz * " range is for the Ultra Long Range models only Circuit Drawings EURO CONNECTOR MODELS Male view shown Dimensional Drawings ROTATABLE SENSORS SHORT HOUSING Mounting clearance & sensing field patterns 2.96" (75.2).59" (40.4) ROTATABLE SENSORS LONG HOUSING 0.25" (6.4) RED LED 0.88" (22.4) METAL HARD COAT MOUNTING YOKE ALLOWS FOR 90 ROTATION.86" (47.2).6" (4.5) 0.79" (20.0) DC, AC/DC.86" (47.2).6" (4.5) TOP SENSING VERSION C L AT CENTER FRONT SENSING VERSION C L COIL (TARGET) GREEN LED CLEARANCE FOR #0-2 SCREWS MINI CONNECTOR Rectangular/Ultra Long Range models Wire DC N.O. 2 (+ DC).88" (47.7).8" (5.0) 4 (- DC) Mounting clearance & sensing field patterns.8" (5.0).88" (47.7) MINI CONNECTOR MODELS Male views shown Wire DC N.O. 0.25" (6.4) 0.50" (2.7) 0.70" (7.8) 4 0.50" (2.7) 2 (+ DC) (- DC) 2 Wire AC/DC N.O..78" (95.0) 2.6" (60.0) LED RED READY TARGET FRONT SENSING VERSION LED GREEN 2 L 0." (8.0) 0.79" (20.0) MINI CONNECTOR CABLE MODELS DC N.O. Wire DC N.O. Brown Black Blue (+ DC) LOAD (- DC) 2 Wire AC/DC N.O. AC N.O. Green L LOAD GND 20 West Meeting Street Lancaster, SC 29720-80-286-849 FAX: -800-678-626 www.namcocontrols.com For technical assistance, call -800-NAMTECH 25
Weld Field Immune Inductive Thermoset Rectangular DC AC/DC /2-4 NPSC Weld Field and Electrical Noise Immunity Predictable, Consistent Electrical Performance 00% Tested and Burned-in Weld Spatter Resistant Housings Will Not Support Combustion Standard Latching Short Circuit Protection (SCP), Non-Latching SCP Available for DC Models only These sensors are specifically designed for extreme duty use in harsh applications such as automotive fabrication and assembly plants. The rectangular series has been the standard of the automotive industry for over 25 years. In that time several different versions, all with a common mounting, have been developed for use as part present and machine location sensors. In addition, specific accessories have been developed to make these sensors even more reliable in your application. 0.5" Range (Unshielded) Thermoset Sensors Front Left Right Top Maximum Short Connector Circuit Sense Sense Sense Sense Load Leakage Voltage Circuit Inrush Type Description Model No. Model No. Model No. Model No. Current Current Drop* Protected Current SHORT HOUSING DC 0-0V 4-pin Euro W, PNP, NO EE50-55440 EE50-56440 EE50-58440 EE50-59440 200mA 0µA 2.0V @ 00mA Latching N/A 4-pin Euro W, PNP, NO EE50-55040 EE50-56040 EE50-58040 EE50-59040 200mA 0µA 2.0V @ 00mA Non-Latching N/A SHORT HOUSING AC/DC 20-20V -pin Mini 2W, NO, LL EE50-55400 EE50-56400 EE50-58400 EE50-59400 500mA.7mA <0V Latching A (20ms) -pin Mini 2W, NO, HL EE560-55400 EE560-56400 EE560-58400 EE560-59400 500mA 4.5mA <0V Latching A (20ms) LONG HOUSING DC 0-0V 4-pin Mini W, PNP, NO EE50-50400 EE50-5400 EE50-5400 EE50-54400 200mA 0µA 2.0V @ 00mA Latching N/A 4-pin Mini W, PNP, NO EE50-50000 EE50-5000 EE50-5000 EE50-54000 200mA 0µA 2.0V @ 00mA Non-Latching N/A 4-pin Euro W, PNP, NO EE50-50440 EE50-5440 EE50-5440 EE50-54440 200mA 0µA 2.0V @ 00mA Latching N/A 4-pin Euro W, PNP, NO EE50-50040 EE50-5040 EE50-5040 EE50-54040 200mA 0µA 2.0V @ 00mA Non-Latching N/A LONG HOUSING AC/DC 20-20V -pin Mini 2W, NO, LL EE50-50400 EE50-5400 EE50-5400 EE50-54400 500mA.7mA <0V Latching A (20ms) -pin Mini 2W, NO, HL EE560-50400 EE560-5400 EE560-5400 EE560-54400 500mA 4.5mA <0V Latching A (20ms) 8' Cable 2W, NO, HL EE560-5045 EE560-545 EE560-545 EE560-5445 500mA 4.5mA <0V Latching A (20ms) LONG HOUSING AC/DC 20-20V DUAL SENSING 5-pin Mini 2W, NO, LL EE50-65500 500mA.7mA <0V Latching A (20ms) 5-pin Mini 2W, NO, HL EE560-65500 500mA 4.5mA <0V Latching A (20ms) * Across conducting sensor LL indicates Low Leakage and HL indicates High Leakage. Consult factory for normally closed model availability. See page 89 for detailed description of standard WFI features. Protected by the Lifetime Replacement Program 26 Namco 20 West Meeting Street Lancaster, SC 29720-80-286-849 FAX: -800-678-626
Common Sensor Characteristics THERMOSET INDUCTIVE RECTANGULAR SENSORS Nominal Sensing Range (±0%) 0.5" Short Circuit Protection yes Repeatability <±% Hysteresis -0% Dimensional Drawings THERMOSET SENSORS SHORT HOUSING Mounting clearance & sensing field patterns DC, AC/DC Temperature Drift (max.) ±0% Ambient Temperature Range -4 F to +58 F Reverse Polarity Protected yes Current Consumption (-wire DC only) 0mA LED Indicator (AC/DC) red = pwr, green = target LED Indicator (DC) green = pwr, amber = target Housing Weld Flash Proof Cable Type PVC Shipping Weight 6 oz. Maximum Switching Frequency 6Hz Circuit Drawings EURO CONNECTOR MODELS Male view shown Wire DC N.O. THERMOSET SENSORS LONG HOUSING Mounting clearance & sensing field patterns 2 4 (+ DC) (- DC) MINI CONNECTOR MODELS Male views shown 2 Wire DC N.O. 4 (+ DC) (- DC) 5 Wire AC/DC N.O. LOAD 2 Wire AC/DC N.O. 2 L THERMOSET SENSORS DUAL SENSING.50" (8.0) 2 5 4 LOAD 2 LOAD 2 LOAD GND.6" (4.0).5" (80.0).82" (97.0) 0.26" (6.5) 0.79" (20.0) 0.26" (6.5) LEDS CABLE MODELS 0.7" (8.0) DC N.O. Wire DC N.O. Brown Black Blue (+ DC) LOAD (- DC) 0.5" (.0) AC N.O. 2 Wire AC/DC N.O. Green L LOAD GND 20 West Meeting Street Lancaster, SC 29720-80-286-849 FAX: -800-678-626 www.namcocontrols.com For technical assistance, call -800-NAMTECH 27
2mm 8mm Inductive Tubular Threaded Barrel Weld Field Immune Weld Field and Electrical Noise Immunity Standard Latching Short Circuit Protection (SCP), Non-Latching SCP available for DC models only Predictable, consistent electrical performance New Hardcoat housings are resistant to weld expulsion These sensors are specifically designed for extreme duty use in harsh applications (i.e., automotive fabrication, assembly plants, etc.). The tubular series is popular as part present and machine location sensors for demanding applications such as resistance welding of body assemblies. Namco s proprietary Hardcoat housings will not allow the hot weld expulsion to adhere to the housing. Maximum Maximum Switching Short Connector Circuit Housing Housing Shielded Unshielded Load Leakage Voltage Frequency Circuit Type Description Material Length Model No. Model No. Current Current Drop* Shielded Unshielded Protected 2mm WFI DC 0-0V Hardcoat, 2mm (Shielded) and 4mm (Unshielded) Sensing Ranges) 4-pin Euro W, PNP, NO Metal-HC** 76mm EE50-78442 EE50-79442 200mA 0µA 2 VDC @ 00mA 6Hz 6Hz Latching 4-pin Euro W, PNP, NO Metal-HC** 76mm EE50-78042 EE50-79042 200mA 0µA 2 VDC @ 00mA 6Hz 6Hz Non-Latching 8mm WFI DC 0-0V Hardcoat, 5mm (Shielded) and 8mm (Unshielded) Sensing Ranges) 4-pin Euro W, PNP, NO Metal-HC** 76mm EE50-7442 EE50-72442 200mA 0µA 2 VDC @ 00mA 6Hz 6Hz Latching 4-pin Euro W, PNP, NO Metal-HC** 76mm EE50-7042 EE50-72042 200mA 0µA 2 VDC @ 00mA 6Hz 6Hz Non-Latching 90 4-pin Euro W, PNP, NO Metal-HC** 67mm EE50-7452 EE50-72452 200mA 0µA 2 VDC @ 00mA 6Hz 6Hz Latching 90 4-pin Euro W, PNP, NO Metal-HC** 76mm EE50-7052 EE50-72052 200mA 0µA 2 VDC @ 00mA 6Hz 6Hz Non-Latching 4-pin Mini W, PNP, NO Metal-HC** 76mm EE50-7402 EE50-72402 200mA 0µA 2 VDC @ 00mA 6Hz 6Hz Latching 4-pin Mini W, PNP, NO Metal-HC** 76mm EE50-7002 EE50-72002 200mA 0µA 2 VDC @ 00mA 6Hz 6Hz Non-Latching 90 4-pin Mini W, PNP, NO Metal-HC** 67mm EE50-7422 EE50-72422 200mA 0µA 2 VDC @ 00mA 6Hz 6Hz Latching 90 4-pin Mini W, PNP, NO Metal-HC** 76mm EE50-7022 EE50-72022 200mA 0µA 2 VDC @ 00mA 6Hz 6Hz Non-Latching 8mm WFI AC/DC 20-20V Hardcoat, 5mm (Shielded) and 8mm (Unshielded) Sensing Ranges) -pin Mini 2W, NO Metal-HC** 76mm EE50-7402 EE50-72402 500mA.7mA <0V 6Hz 6Hz Latching -pin Mini 2W, NO Metal-HC** 76mm EE560-7402 EE560-72402 500mA 4.5mA <0V 6Hz 6Hz Latching -pin Micro 2W, NO Metal-HC** 76mm EE50-742 EE50-7242 500mA.7mA <0V 6Hz 6Hz Latching 90 -pin Mini 2W, NO Metal-HC** 67mm EE50-7422 EE50-72422 500mA.7mA <0V 6Hz 6Hz Latching 90 -pin Mini 2W, NO Metal-HC** 67mm EE560-7422 EE560-72422 500mA 4.5mA <0V 6Hz 6Hz Latching * Across conducting sensor ** Hard Coat: Weld spatter resistant *** Non-hardcoat versions Consult factory for normally closed model availability. See page 89 for detailed description of standard WFI features. Accessories: see pages 84-87. Protected by the Lifetime Replacement Program 28 Namco 20 West Meeting Street Lancaster, SC 29720-80-286-849 FAX: -800-678-626
Common Sensor Characteristics 8mm DIAMETER WFI SENSORS 8mm 2mm Shielded Sensing Range (±0%) 5mm 2mm Dimensional Drawings 8mm EURO CONNECTOR MODELS.6" (4.0) Shielded 2/8mm-WFI Body threads = M8x LED INDICATORS Unshielded Sensing Range (±0%) 8mm 4mm Short Circuit Protection yes yes Repeatability <±% Hysteresis -0%.4" (4.0) Unshielded 2.99" (76.0) Temperature Drift (max.) ±0% Ambient Temperature Range -4 F to +58 F Reverse Polarity Protected yes Current Consumption (-wire DC only) 0mA NEMA Enclosure Type,, 4, 6, LED Indicator (AC/DC) red = power, grn = target LED Indicator (DC) grn = pwr, Amber = target Metal Housings Weld Flash Proof Shipping Weight 4 oz..8" (5.0) Shielded.06" (27.0) Unshielded 8mm MINI CONNECTOR MODELS.6" (4.0) Shielded 2.64" (67.0) LED INDICATORS LED INDICATORS Circuit Drawings EURO CONNECTOR MODELS Male view shown Wire DC N.O..4" (4.0) Unshielded 2.99" (76.0) 2 4 (+ DC).8" (5.0) Shielded LED INDICATORS (- DC) MINI CONNECTOR MODELS Wire DC N.O. Male views shown 2 Wire AC/DC N.O..06" (27.0) Unshielded 2.64" (67.0) 2 4 (+ DC) 2 GND L 2mm EURO CONNECTOR MODELS Body threads = M2x (- DC) MICRO CONNECTOR MODELS 2 Wire AC/DC N.O. Male view shown GND 2 L 20 West Meeting Street Lancaster, SC 29720-80-286-849 FAX: -800-678-626 www.namcocontrols.com For technical assistance, call -800-NAMTECH 29
0mm Inductive Tubular Threaded Barrel Weld Field Immune Weld Field and Electrical Noise Immunity Standard Latching Short Circuit Protection (SCP), Non-Latching SCP available for DC models only. Dual LED indicators Predictable, consistent electrical performance 00% tested & burned-in New Hardcoat housings are resistant to weld expulsion These sensors are specifically designed for extreme duty use in harsh applications (i.e., automotive fabrication, assembly plants, etc.). The tubular series is popular as part present and machine location sensors for demanding applications such as resistance welding of body assemblies. Namco s proprietary Hardcoat housings will not allow the hot weld expulsion to adhere to the housing. 0mm (Shielded) and 5mm (Unshielded) Sensing Range Maximum Maximum Switching Short Connector Circuit Housing Housing Shielded Unshielded Load Leakage Voltage Frequency Circuit Type Description Material Length Model No. Model No. Current Current Drop* Shielded Unshielded Protected WFI DC 0-0V 4-pin Euro W, PNP, NO Metal-HC 76mm EE50-77442 EE50-76442 200mA 0µA 2 VDC @ 00mA 6Hz 6Hz Latching 4-pin Mini W, PNP, NO Metal-HC 76mm EE50-77402 EE50-76402 200mA 0µA 2 VDC @ 00mA 6Hz 6Hz Latching 4-pin Euro W, PNP, NO Metal-HC 76mm EE50-77042 EE50-76042 200mA 0µA 2 VDC @ 00mA 6Hz 6Hz Non-Latching 4-pin Mini W, PNP, NO Metal-HC 76mm EE50-77002 EE50-76002 200mA 0µA 2 VDC @ 00mA 6Hz 6Hz Non-Latching WFI AC/DC 20-20V -pin Mini 2W, AC/DC, NO,LL Metal-HC 76mm EE50-77402 EE50-76402 500mA.7mA <0V 6Hz 6Hz Latching -pin Mini 2W, AC/DC, NO, HL Metal-HC 76mm EE560-77402 EE560-76402 500mA 4.5mA <0V 6Hz 6Hz Latching -pin Micro 2W, AC/DC, NO Metal-HC 76mm EE50-7742 EE50-7642 500mA.7mA <0V 6Hz 6Hz Latching * Across conducting sensor Consult factory for normally closed model availability. See page 89 for description of WFI features. Accessories: see pages 84-87. Protected by the Lifetime Replacement Program 0 Namco 20 West Meeting Street Lancaster, SC 29720-80-286-849 FAX: -800-678-626
Common Sensor Characteristics 0mm DIAMETER WFI SENSORS Dimensional Drawings EURO/MICRO CONNECTOR MODELS 0mm-WFI Body threads = M0x.5 Shielded Sensing Range (±0%) Unshielded Sensing Range (±0%) 0mm 5mm.5" (8.4) Shielded LED INDICATORS Short Circuit Protection yes Repeatability <±% Hysteresis -0% Range Drift over Temperature ±0%.5" (29.2) Unshielded.00" (76.0) Operating Temperature Range -4 F to +58 F Reverse Polarity Protected yes Current Consumption (-wire DC only) 0mA NEMA Enclosure Type,, 4, 6, LED Indicator (AC/DC) red = pwr, green = target LED Indicator (DC) green = pwr, amber = target MINI CONNECTOR MODELS.69" (4.0) Shielded LED INDICATORS Metal Housings Shipping Weight Weld Flash Proof 5 oz..0" (.0) Unshielded.00" (76.0) Circuit Drawings EURO CONNECTOR MODELS Male view shown Wire DC N.O. 2 (+ DC) 4 (- DC) MICRO CONNECTOR MODELS 2 Wire AC/DC N.O. Male view shown GND 2 L MINI CONNECTOR MODELS 2 Wire AC/DC N.O. 2 GND L Male views shown Wire DC N.O. 4 2 (+ DC) (- DC) 20 West Meeting Street Lancaster, SC 29720-80-286-849 FAX: -800-678-626 www.namcocontrols.com For technical assistance, call -800-NAMTECH
Weld Field Immune Focused Field Long Range Sensors READY Flashing LEDs - Short Circuit Protect mode MADE IN U.S.A. TARGET Focused Field FlatPak Sensor: Range Stable to 70 C, Never Needs Range Adjustments NO ADJUSTMENTS C +00 +90 +80 +70 +60 C +50 +40 +0 +20 +0 0-0 -20-0 -40-50 -60 The Namco Focused Field FlatPak Proximity Sensor is a Super Heavy Duty, completely encapsulated sensor designed to sense large metal objects at long ranges. It is the first sensor of this body style to offer a focused sensing field. The focused sensing field allows this sensor to be mounted flush with surrounding metal with only a.25 inch gap between the sensor and the metal surface. This sensor will operate reliably in this setting without sensing range adjustments all year round regardless of changes in ambient temperature. TARGET Competitive sensors have traditionally included a trim pot to enable the user to revise the sensing distance when ambient conditions changed. These sensors were susceptible to substantial growth in sensing range when ambient temperature changed from season to season. They would eventually "lock on" to surrounding metal due to this growth in range and to the un-focused nature of their sensing fields. Only a.25 inch clearance is necessary to insure that the Focused Field FlatPak will never lock on to surrounding metal. TARGET No TRANSIENTS at Power-Up The Namco FlatPak sensor has the most noise resistant circuitry in the business, Namco's patented Weld Field Immune (WFI) circuitry. Not only will the sensor operate reliably in the presence of 20,000 amp weld fields, it also powers-up glitch-free and is extremely resistant to radio frequency interference and other forms of electrical noise. Problems such as "false detection" and "dropping out" are non-existent, further minimizing programming and maintenance requirements. Leakage Current Namco FlatPak POWER UP CURRENT Surrounding Metal Input Module Turn-on Point Leakage Current Other Extended Range Sensors POWER UP CURRENT 2 Namco Focused Field FlatPak Sensor. A clean wave means predictable performance. Power-up current draw of competitive sensor will turn on PLC inputs. Namco 20 West Meeting Street Lancaster, SC 29720-80-286-849 FAX: -800-678-626
An Easy Upgrade... Directly Replaces Other Extended Range Sensors The Namco Focused Field FlatPak Sensor is designed to directly replace existing sensors of this format. It mounts on 65mm bolt centers and is the only sensor of this type that is made in the USA. It comes with a Lifetime Free Replacement Warranty. No sensing range adjustments, ever. Assists in Troubleshooting Namco's WFI circuit includes latching Short Circuit Protection (SCP). If the sensor detects excessive current, it reverts to a sleep state with LEDs alternately flashing. This provides a clear indication of a problem in the circuit, simplifying the troubleshooting task. The sensor draws minimal current (2mA) and can remain in this state indefinitely. Namco Weld Field Immune circuitry is designed to operate in presence of resistance welding electrodes carrying 20,000 Amperes RMS (45,000 Amperes peak). Weld-splatter resistant housing. Super Reliable Covered by Namco Lifetime Replacement Program. Built-in connector available. Available with either 40mm or 50mm sensing range. Namco's patented latching short circuit protection is very fast acting. Prolonged shorts will not damage electronics; latching feature aids in the diagnosis of troublesome intermittent faults. Available in either 20-50 VAC/DC or 0-0 VDC styles. Only extended range sensor made in the USA. You can mount flush with metal floors or within metal channel. 20 West Meeting Street Lancaster, SC 29720-80-286-849 FAX: -800-678-626 www.namcocontrols.com For technical assistance, call -800-NAMTECH
Weld Field Immune Focused Field Long Range Sensors READY Flashing LEDs - Short Circuit Protect mode MADE IN U.S.A. TARGET 40mm or 50mm Sensing Range No Adjustment Sensor Flush Mountable - Focused Field Will not Lock on Surrounding Metal Easy Upgrade/Direct Replacement Sensing Range - Stable From -25 C to 70 C Namco Weld Field Immune Circuit Clean PowerUp - No Turn-on Transients Latching SCP - Simplifies Troubleshooting Super Reliable, Fully Epoxy- Encapsulated: Covered by Lifetime Free Replacement Program ONLY SENSOR OF ITS TYPE MADE IN USA Protected by the Lifetime Replacement Program The NAMCO Focused Field FlatPak Proximity Sensor is a Super Heavy Duty, completely encapsulated sensor designed to sense large metal objects at long ranges in tough environments. It is the first sensor of this body style to offer a focused sensing field. Competitive sensors have traditionally included a trim pot to enable the user to revise the sensing distance when ambient conditions change. These sensors are susceptible to substantial growth in sensing range when ambient temperatures change from season to season. They eventually lock on to surrounding metal due to this growth in range and to the unfocused nature of their sensing fields. The Namco Focused Field FlatPak Sensor has two advantages over competitive products that eliminate the need for constant adjustment. In fact, there are no sensitivity adjustments to be made, ever!!! The first advantage is the focused field. The shape of this field minimizes sensing of surrounding metal. When mounted in an identical setting to the competitive switch, it s sensing range changes less than 0%, and the shape of the field stays focused forward of the switch. The second advantage is exceptional stability over temperature. The Namco FlatPak s range will increase a maximum of 0% even at the maximum ambient temperature, and the shape of the field will continue in a non-side-sensing focused field. The Namco Focused Field FlatPak proximity sensor requires only a.25 inch clearance to surrounding metal. Once installed with this clearance, the sensor will never lock on to surrounding metal. This Namco FlatPak also includes the most noise resistant circuitry in the business, Namco s patented Weld Field Immune (WFI) circuitry. Not only will the sensor operate reliably in the presence of 20,000 amp weld fields, it also powers up glitch-free and is extremely resistant to radio frequency interference and other forms of electrical noise. Problems such as false detection and dropping out are non-existent, further minimizing programming and maintenance requirements. Namco s WFI circuit includes latching Short Circuit Protection (SCP). If the sensor detects excessive current, it reverts to a sleep state with LEDs flashing. This provides a clear indication of a problem in the circuit, simplifying the troubleshooting task. The sensor draws minimal current (2 ma) and can remain in this state indefinitely. The Namco Focused Field FlatPak Sensor is designed to directly replace existing sensors of this format. It mounts on 65mm bolt centers and is the only sensor of this type that is Made in the USA. It comes with a Lifetime Free Replacement Warranty. Maximum Maximum Short Connector Circuit Housing Housing Model Load Leakage Voltage Switching Circuit Type Description Material Dimensions No. Current Current Drop* Frequency Protected 40mm SENSING RANGE DC 0-0V 4-pin Euro W, PNP, NO Fortron 79x92x40mm EE50-86440 200mA <0µA <2.5V @ 200mA 5Hz Latching 4-pin Euro W, PNP, NO Fortron 79x92x40mm EE50-86040 200mA <0µA <2.5V @ 200mA 5Hz Non-latching 4-pin Mini W, PNP, NO Fortron 79x92x40mm EE50-86400 200mA <0µA <2.5V @ 200mA 5Hz Latching 4-pin Mini W, PNP, NO Fortron 79x92x40mm EE50-86000 200mA <0µA <2.5V @ 200mA 5Hz Non-latching 40mm SENSING RANGE AC/DC 20-50V -pin Micro 2W, NO Fortron 79x92x40mm EE50-86420 200mA.7mA 0V 5Hz Latching -pin Mini 2W, NO Fortron 79x92x40mm EE50-86400 200mA.7mA 0V 5Hz Latching 4 50mm SENSING RANGE DC 0-0V 4-pin Euro W, PNP, NO Fortron 79x92x40mm EE50-88440 200mA <0µA <2.5V @ 200mA 5Hz Latching 4-pin Euro W, PNP, NO Fortron 79x92x40mm EE50-88040 200mA <0µA <2.5V @ 200mA 5Hz Non-latching 4-pin Mini W, PNP, NO Fortron 79x92x40mm EE50-88400 200mA <0µA <2.5V @ 200mA 5Hz Latching 4-pin Mini W, PNP, NO Fortron 79x92x40mm EE50-88000 200mA <0µA <2.5V @ 200mA 5Hz Non-latching 50mm SENSING RANGE AC/DC 20-50V -pin Micro 2W, NO Fortron 79x92x40mm EE50-88420 200mA.7mA 0V 5Hz Latching -pin Mini 2W, NO Fortron 79x92x40mm EE50-88400 200mA.7mA 0V 5Hz Latching Note: For Minimum-On-Delay* versions of any of the part numbers above - Replace the 0 at the end of the part number with a 5. (i.e.: EE50-86445 is the Miniimum-On-Delay version of the EE50-86440). * Minimum-On-Delay provides an output On for a minimum 0.5 sec., no matter how short a period the target is present. Namco 20 West Meeting Street Lancaster, SC 29720-80-286-849 FAX: -800-678-626
Common Sensor Characteristics FLATPAK PROXIMITY SENSORS Supply Voltage 0-0V DC 20-50V AC/DC Dimensional Drawings FOCUS FIELD FLATPAK EE500 Voltage Drop Max. Load Current @ 25 C < 2.5V @ 200mA < 2.0V @ < 00mA 200mA < 0V Inrush Current (rms Hz) -.5A Leakage Current 0µA.7mA Sensing Range Response Time Power-up Time Max. Switching Frequency Ambient Temp. Range 40mm/50mm 0ms 70ms 5Hz -25 C to 70 C (- F to 58 F) LED Functions 0-0V DC 20-50V AC/DC Green Amber Red Green Power Off Off Off Off Off Power On Load De-energized On Off On Off Power On Load Energized On On Off On *SCP Mode Activated Flashing Flashing *Short Circuit Protection: If the sensor is shorted, the sensor s Short Circuit Protection (SCP) will be activated. When this occurs, both LEDs will flash and the sensor will limit current flow to about 2.0mA. Circuit Drawings EURO CONNECTOR MODELS 2 Wire DC N.O. (+ DC) 4 MINI CONNECTOR MODELS Wire DC N.O. (- DC) 2 Wire AC/DC N.O. 4 2 (+ DC) 2 L (- DC) MICRO CONNECTOR MODELS Micro 2 Wire 2-Wire AC AC N.O. N.O. GND 2 L 20 West Meeting Street Lancaster, SC 29720-80-286-849 FAX: -800-678-626 www.namcocontrols.com For technical assistance, call -800-NAMTECH 5