V series SPOT & FLOOD - Low Voltage MR16 Narrow Spotlight Dimmable Dimmable Cree XHP Nichia 486ARE Base Type : GU5.3 Input Voltage : 12V AC/DC LED Source : Cree / Nichia Beam Angle : 10 Total Power Consumption : Cree : 7W±10% Nichia : 7W±10% Safety & Environment Specifications V series - MR16 bulbs are manufactured to conform to the following safety approbation. Certificated Mark EMC LVD ErP REACH Certificate Approval Certificate Approval : : Completed : In Progress Energy Efficiency Class : A+ Rated luminous flux (ErP) : 375lm / 510lm 12V Lamps compatibility of transformers and dimmers : Since there are various kinds of AC 12V transformers and dimmers in the market, 100% compatibility between these accessories is unlikely to achieved. -Electronic AC Transformer: One and broadly compatible with 12V lamps. However, flicking and burning might occur when incompatible. Even if the 12V lamp is compatible with the selected transformer, dimmer compatibility might be another issue that needs to be resolved. -Magnetic AC Transformer: LED bulb is compatible with magnetic transformers when used with 12V halogens, however it would be less efficient and have a shorter lifespan. Even if the 12V lamp is compatible with the selected transformer, dimmer compatibility might be another issue that needs to be resolved. DC Power Supply/Driver: We highly recommend using this type of devise, since it gives the highest efficiency and with no compatible issue. However, the dimming function will be hindered because it is designed in constant voltage and the dimmer can not work properly with it. Rev:01 2018 B.L.T.C. RESERVES ALL RIGHTS www.bltc.com.tw 1
Specification Polar Diagram No. Part Number LED Source Input Voltage CCT 1 BLV1653SSA-CVW8L(SG) C.R.I. (RA) 2700K 80 Beam Angle ( ) CBCP Candela (cd) Total Pow. 4 BLV1653SSA-CW8L(SG) 5700K 80 12725 480 69 5 BLV1653SSA-CVW8L(SG)90 C-XHP 12V 2700K 90 10 9380 7 380 54 11670 +/-10% Typical Lumens (lm) Efficiency (lm/w) 440 63 2 BLV1653SSA-CWW8L(SG) 3000K 80 12125 460 66 3 BLV1653SSA-CNW8L(SG) 4000K 80 12725 480 69 6 BLV1653SSA-CWW8L(SG)90 3000K 90 9805 395 56 7 BLV1653SSA-CNW8L(SG)90 4000K 90 10365 415 59 8 BLV1653SSA-CW8L(SG)90 5700K 90 10650 415 59 9 BLV1653SSA-NVW8LE(SG) 2700K 80 10 BLV1653SSA-NWW8LE(SG) Nichia 3000K 80 6310 625 83 12V 10 7.5 11 BLV1653SSA-NNW8LE(SG) 486ARE 4000K 80 6620 655 87 6070 600 80 12 BLV1653SSA-NW8LE(SG) 5700K 80 6620 655 87 Dimming Power Factor (PF) Limited 0.99 Limited 0.99 Option 1 : Lamp base: GU5.3 Option 2 : Input voltage will be 12V if YESt specified. Special request such as 24V or constant current 350mA or higher/lower can be accomplished with a different price. Option 3 : The above CCT. is defined based on ANSI standard. Specific color temperature can be done upon customer request. For instance 2700K could be assigned as 2580~2725K or 2725~2870K, the same can be accomplished for 3500K and 5500K as well but shall be with different price. 2200K is also available upon request. Option 4 : 4700~6700K typical CRI +70; 2580~4500K typical CRI +80; CRI+90 / CRI+95 is also available upon request. Option 5 : Power factor: AC12V is above 0.8; DC12V is 0.99. Option 6 : This product is compatible to work in sealed fixtures and thermal-insulation fixtures. Option 7 : "SG" Short Neck Option 8 : Limited Dimming: Under the proper configuration, there is a chance of dimmable, such as the aforementioned limited dimming of low voltage and high voltage LED lamp. 2
Cree BLV1653SSA-CVW8L(SG) BLV1653SSA-CWW8L(SG) BLV1653SSA-CNW8L(SG) BLV1653SSA-CW8L(SG) 1.0m 11670 12125 12725 12725 2.0m 2918 3031 3181 3181 3.0m 1297 1347 1414 1414 4.0m 729 758 795 795 5.0m 467 485 509 509 Cree BLV1653SSA-CVW8L(SG)90 BLV1653SSA-CWW8L(SG)90 BLV1653SSA-CNW8L(SG)90 BLV1653SSA-CW8L(SG)90 1.0m 9380 9805 10365 10650 2.0m 2345 2451 2591 2663 3.0m 1042 1089 1152 1183 4.0m 586 613 648 666 5.0m 375 392 415 426 Nichia 486ARE BLV1653SSA-NVW8LE(SG) BLV1653SSA-NWW8LE(SG) BLV1653SSA-NNW8LE(SG) BLV1653SSA-NW8LE(SG) 1.0m 6070 6310 6620 6620 2.0m 1518 1578 1655 1655 3.0m 674 701 735 735 4.0m 379 394 414 414 5.0m 243 252 265 265 3
2D Drawing Product Packing MR16 Step 1 Step 2 Step 3 Gife Box/ White Box 1Pc of Lamp Inner Carton 100 Boxes Outer Carton 2 Inner Cartons (200 White Boxes) Dimensions(mm) L:53*W:53*H:83 Dimensions(mm) L:285*W:285*H:385 Dimensions(mm) L:590*W:304*H:400 Lamp body material Dimension (mm) - Ø : 50 Net Weight (g) Short Neck LENS : PC HEAT SINK : Aluminium 50 48 PLASTIC HOUSING : PC BASE : NPB Base GU5.3 Base GU5.3 Net Weight (g) 50 Net Weight (g) 50 Luminaire Notice The LED Lamp is not compatible with all luminaires for halogen lamps. Before installation, please read following guidelines: -Not for outdoor fixtures. -Not for wet environment. -Not for integral primary optics. sealed fixtures Not for outdoor fixtures 4
Safety Label & Warning Do not cover lamp with paper, fabric, or any flammable material to avoid burning. Working Environmental Temperature: -20 ~ +40 Do not insert metal objects into the gap of lamp base. The appropriate combination of lamp and lamp base should be carefully selected for different voltage and wattage. Do not use in high-humidity environment or near water to avoid damage. (Except B.L.T.C. Outdoor IP65 version) Not suitable for use in automatic light sensor system, emergency lighting fixture and mercury fixture to avoid damage and burning. Do not use near flammable objects such as gasoline, spray, chemicals, paints, oil etc. Do not use in place that is likely to be impacted by force or vibration. Do not use in acidic environment. Please turn the light off when installing or cleaning to avoid electrical shock. Please handle with care to avoid damage and collision. Do not touch any powered-on lamps or lamps that have just been turned off to avoid burning. Please ensure the lamp is tightly installed into the socket to avoid dropping. Please select the appropriate fixture based on lamp size and weight. General Guideline Slight difference of color temperature and brightness is likely to occur for the same part number due to the difference of LED chips. Brightness, color temperature, and light distribution may vary with different types of bulbs. To avoid heat build-up and the shortening of product lifetime, sealed fixture is not recommended. Keep the lamp away from radio, video and television for a distance of 1 meter to avoid noise caused by interference. Do not install lamp in heal insulated fixture. Do not disassemble or reconstruct the lamp. Do not stare directly at the lamp to avoid eye injury. The light distribution may vary with different type of fixtures. Do not wash the lamp with water. Do not use the lamp outdoor if it is not marked as IP65. To avoid damage and poor insulation, do not use the lamp near water or in frosted environment if it is not marked as IP65. For lamps with a weight significantly higher than that of the lamps for which they are a replacement, attention should be drawn to the fact that the increased weight may reduce the mechanical stability of certain luminaires and lampholders and may impair contact making and lamp retention. Guide to Dimming The maximum LED lamp load is not clearly defined by most of the key dimmer manufactures. BLTC's dimmable lamps can work with most of leading edge (TRIAC) and trailing edge dimmers, however 100% compatibility cannot be guaranteed due to the variety and quality of dimmers in the market. Some of the compatibility issues may include audible noise, flickering and higher light output when the dimmer is set at a certain level. Maximum total LED lamps power should not exceed 20% of dimmer's maximum rated power. For instance, if a dimmer's maximum rated power is 600 Watts, the recommended maximum LED lamp load power should be under 120 Watts. The remote control may not work properly when using around infrared remote control such as television remote and AC remote. If the dimmer is set at a lower than 10% level when the blub is turned on, it is possible to have no light emission at all or is easy to blink. In this case, please just tune the dimmer to 100% and turn the bulb on again. The time it takes to turn on the light may vary with different kind of dimmer switch. Do not use dimmer with non-dimmable bulbs to avoid damage and burning. Sometimes the lamp may fail to dim when working with the following kinds of dimmers. -sensor dimmers -stepping dimmers -remote control dimmers -dimmers with memory function--to re-show the light scene with even just a button. When dimming, the brightness of the lamp will be affected by the variation of power supply and bulb types. When the dimmer is tuned at the lowest lever, a moment of brightness might occur after the power is turned on. When the dimmer is tuned at the lowest lever, dimming or flickering might occur when a high-power consumption device such as hair dryer or air conditioner is used due to power and current fluctuation. When turning off light, it is highly recommended to turn off the power switch instead of simply tuning the dimmer to the lowest level. When more than one bulb is connected to a dimmer, the brightness of each bulb may vary depending on its characteristic. It is normal to have minor noises when turning dimmers. If the light flickers when dimming, please adjust the dimmer until the light is tuned to a steady level. Solution to Abnormal Dimmable Bulbs Please ensure the dimmer is operated on an independent AC line, not connecting to other electrical appliances or devices. If high-power consumption devices such as freezer, air conditioner, laundry machine, and hair dryers are connected to the same AC line with the dimmer, abnormal light emission is likely to occur. When abnormal light occur when a dimmer is connected to only one LED bulb, please try the combination of more than two LED bulbs. The optimal combination is to connect one dimmer to the quantity of LED bulbs adding up to over 35 watts. This is due to the minimum power consumption of a dimmer. 5