characteristics Complete switches with cable entry Type of head Plunger (fixing by the body) Form B () Form C () Form E () with elastomer boot Steel roller References of complete switches with ISO M x cable entry() -pole NC + NO (XESP) -pole NC + NO break before make, slow break (XENP) -pole NC + NC (XESP) -pole NC + NC simultaneous, slow break (XENP) -pole NC + NC + NO snap action (XESP) -pole NC + NC + NO break before make, slow break (XENP), horizontal actuation in, vertical actuation in, horiz. or vert. actuation in XCKPP XCKPP XCKPP XCKPP XCKPP XCKPP XCKPP XCKPP XCKPP XCKPP XCKPP XCKPP ZCE ZCE ZCP + ZCE ZCP + ZCE ZCP + ZCP + ZCE ZCE ZCP + ZCE ZCP + ZCE ZCE ZCE ZCP + ZCE ZCP + ZCE ZCE ZCE ZCP + ZCE ZCP + ZCE ZCE ZCE ZCP + ZCE ZCP + ZCE Weight (kg)...... References of complete switches with entry for n cable gland For an entry tapped for a n cable gland, replace P in the reference by G. Example: XCKPP becomes XCKPG or ZCPEP becomes ZCPEG..(P) mm mm..(p) mm.(p) mm.(a).(p). mm Switch actuation On end By cam mm..(p) mm mm. mm..(p) mm mm..(p) mm mm..(a).(p).(a).(p). mm.(a).(p)..(p).(a).(p) (A) (B) cam displacement (P) positive ing point.(a).(p).(a).(p) mm.(a).(p).(a).(p).(a).(p).(a).(p) mm.(b).(p).(a).(p).(b).(p).(b).(p).(b).(p).(b).(p) mm.(a).(p)..(a).(p). mm.(a).(p)..(a).(a).(p)..(a).(p). mm NC contact with positive ing operation Maximum actuation speed. m/s m/s Mechanical durability (in millions of operating cycles) Minimum force or For tripping N N N For positive ing N N N Cable entry () entry tapped M x mm for ISO cable gland, clamping capacity to mm () Form conforming to EN, see page. () Switches with gold contacts or eyelet type connections: please consult our Customer Care Centre.
characteristics (continued) Complete switches with cable entry Type of head Plunger (fixing by the head) Rotary (fixing by the body) Multial Form A () M with metal end.(p) mm M with steel roller.(a).(p). mm Variable length thermoplastic References of complete switches with ISO M x cable entry() -pole NC + NO (XESP) -pole NC + NO break before make, slow break (XENP) -pole NC + NC (XESP) -pole NC + NC simultaneous, slow break (XENP) -pole NC + NC + NO (XESP) -pole NC + NC + NO break before make, slow break (XENP), Ø Variable length thermoplastic, Ø Cat s whisker () XCKPHP XCKPHP XCKPP XCKPP XCKPP XCKPP XCKPP XCKPHP XCKPHP XCKPP XCKPP XCKPP XCKPP XCKPP ZCEH mm. ZCEH ZCP + ZCEH ZCP+ ZCEH ZCEH ZCEH ZCP + ZCEH ZCP + ZCEH ZCE + ZCY ZCE + ZCY ZCP + ZCE + ZCY ZCP + ZCE + ZCY ZCE + ZCY ZCE + ZCY ZCP + ZCE + ZCY ZCP + ZCE + ZCY ZCE + ZCY ZCE + ZCY ZCP + ZCE + ZCY ZCP + ZCE + ZCY ZCE + ZCY ZCE + ZCY ZCP + ZCE + ZCY ZCP + ZCE + ZCY ZCE ZCE ZCP + ZCE ZCP + ZCE Weight (kg)....... References of complete switches with entry for n cable gland For an entry tapped for a n cable gland, replace P in the reference by G. Example: XCKPHP becomes XCKPHG or ZCPEP becomes ZCPEG. mm..(p) mm mm..(p) mm.(a).(p).(a).(p)..(p).(a).(p).(a).(p). mm (P) (P) (A) cam displacement (P) positive ing point (P) (P) (P) NC contact with positive ing operation Switch actuation On end By cam By any moving part (P) (P) (P) Maximum actuation speed. m/s m/s m/s (any direct.) Mechanical durability million operating cycles million Minimum For tripping N N. N.m. N.m force or For positive ing N N. N.m Cable entry entry tapped M x mm for ISO cable gland, clamping capacity to mm () Form conforming to EN, see page. () Value taken with actuation by moving part at from the fi xing. () Switches with gold contacts or eyelet type connections: please consult our Customer Care Centre.
Dimensions Complete switches with cable entry ZCPp + ZCPEP/ZCPp + ZCPEP ZCE () ZCE ZCE ZCE. Ø.. () / () Ø. ZCE ZCEH ZCEH.. Ø. Ø Mx(). Mx (). () Tapped entry for ISO M x or Pg cable gland. () elongated holes Ø. x. mm on mm centres, holes Ø. on centres. () x Ø holes for support studs, depth mm. () Fixing nut thickness. mm.
.. Dimensions (continued) Complete switches with cable entry ZCE + ZCY ZCE + ZCY ZCE + ZCY.... ZCE + ZCY ZCE.
characteristics, connections, dimensions M connector Type of head Plunger (fixing by the body) Form B () Form C () Form E () References -pole NC + NO (XESP) -pole NC + NC (XESP) with elastomer boot () Steel roller, horizontal actuation in, vertical actuation in, horiz. or vert. actuation in XCKPM XCKPM XCKPM XCKPM XCKPM XCKPM ZCPM + ZCE ZCPM + ZCPM + ZCE ZCPM + ZCE ZCPM + ZCE ZCPM + ZCE Weight (kg)...... (A) (B) cam displacement (P) positive ing point NC contact with positive ing operation () Form conforming to EN, see page. () Nitrile for indoor use. Switch actuation On end By cam mm. mm. mm. mm..(a).(p).(a).(p).(a).(p).(a).(p).(b).(p).(b).(p).(a).(p)..(a).(p). Maximum actuation speed. m/s m/s Mechanical durability (in millions of operating cycles) Minimum force or Connection Connections M connector For tripping N N N For positive ing N N N M connector, Ui V, Ie A maximum, Ith A XESP -: NC -: NO XESP -: NC -: NC Dimensions ZCPpM ZCE ZCE ZCE M / () () () elongated holes Ø. x. mm on mm centres, holes Ø. on centres. () x Ø holes for support studs, depth mm. () Fixing nut thickness. mm. ZCE ZCE ZCEH Ø Ø.. Ø.. Ø.. Ø. Mx() Ø