Tie-rod Type ydrulic Cylinder Series C CQ Series C C CN C CS C C Relted Equipment Nominl pressure: 3. P : 4,,,, 1,, D- Courtesy of Steven Engineering, Inc.-3 Ryn Wy, South Sn rncisco, C 4-7-in Office: (6) --Outside Locl re: () --www.stevenengineering.com 3
3. P Tie-rod Type ydrulic Cylinder Double cting/single Rod Series C ø4, ø, ø, ø, ø1, ø, ø With uto Switch With uto switch (built-in mgnet) uilt-in gnet Cylinder odel If built-in mgnet cylinder without uto switch is required, there is no need to enter the symbol for the uto switch. (Exmple) CD-1 Nil C L 4 1 CD L 4 1 W L G C D T U Nil Tube mteril luminum lloy Steel tube ounting style sic style xil foot style Rod flnge style ed flnge style Single clevis style Double clevis style Center trunnion style Rod trunnion style ow to Order 4 1 4 1 4 mm mm mm mm 1 mm 4 mm mm mm mm 1 mm mm mm luminum tube luminum tube Steel tube Cylinder options Rod boot Cushion Nil J Nil N R Indicte in lphbeticl order. uto switch type Without uto switch Select pplicble uto switch models from the tble below. Without rod boot Nylon trpulin Neoprene cloth oth sides Without cushion With rod cushion With hed cushion Cylinder stroke Refer to the stndrd stroke tble on pge 3. Number of uto switches Nil S 3 n pcs. 1 pc. 3 pcs. "n" pcs. pplicble uto Switches: Refer to pges 7 to 46 for further detils on ech uto switch. Type Reed switch Solid stte switch Specil function Lod voltge uto switch model Led wire length (m) Electricl Wiring entry (output). 1 3 DC C Tie-rod mount nd mount None (Nil) () (L) (Z) N 3-wire (NPN) G V, V P 3-wire (PNP) Grommet 4 V GP V -wire 1 V, V J1 Terminl 3-wire (NPN) V, V G3 conduit -wire V 3 Dignostic indiction (-color disply) Indictor light Yes 3-wire (NPN) 3-wire (PNP) 4 V V, V NW PW W Pre-wired connector pplicble lod Grommet -wire V W 3-wire (NPN) N V, V Wter resistnt 3-wire (PNP) P IC circuit (-color disply) -wire V G Dignostic output (-color disply) 4-wire (NPN) V, V G IC circuit 3-wire (NPN equiv.) V 6 IC circuit Yes 1 V 3 Grommet No 1 V or less IC circuit Rely Yes 1 V, V 4 4 PLC No V V or less 64 64 -wire 4 V Terminl 33 PLC conduit Yes 1 V, V Rely DIN terminl PLC Dignostic indiction (-color disply) Grommet W W Led wire length symbols:. m Nil (Exmple) NW Solid stte uto switches mrked " " re produced upon receipt of order. 1 m (Exmple) NW Types D-G,, G W, W, GL, G, GNTL,, 64, nd W 3 m L (Exmple) NWL cnnot be mounted on ø bore size cylinders. m Z (Exmple) NWZ Since there re pplicble uto switches other thn listed, refer to pge 3 for detils. or detils bout uto switches with pre-wired connector, refer to pges nd 3. D-,, W, L uto switches re shipped together (not ssembled). (Only uto switch mounting brckets re pcked ssembled.) 3 Courtesy of Steven Engineering, Inc.-3 Ryn Wy, South Sn rncisco, C 4-7-in Office: (6) --Outside Locl re: () --www.stevenengineering.com GW GPW IC circuit IC circuit IC circuit Rely PLC
Tie-rod Type ydrulic Cylinder Double cting/single Rod Series C odels odel C C Tube mteril luminum lloy Steel 4,,,, 1 4,,,, 1,, Specifictions JIS symbol ction luid Nominl pressure Proof pressure ximum llowble pressure inimum operting pressure mbient nd fluid temperture Piston speed Cushion Stroke length tolernce ounting Note) Refer to pge 4 for definitions of terms relted to pressure. Stndrd Strokes Double cting/single rod ydrulic fluid 3. P. P 3. P. P Without uto switch: 1 to C With uto switch: 1 to 6 C to 3 mm/s Cushion sel +. +1. +1. to 1st, 1 to st, to st +1.4 +1. to 1st, 1 to st sic style (), xil foot style (L), Rod flnge style () ed flnge style (G), Single clevis style (C), Double clevis style (D), Center trunnion style (T), Rod trunnion style (U) Stndrd strokes 4 to 1 to 1 to 1 to 1 to to to Note) Refer to the stroke selection Tble in Technicl Dt, strting with pges 3 nd 4 to determine stroke limittion depending on the type of mounting brckets tht will be used. Then mke your selection. Cushion Strokes (or Rod Side nd ed Side) CQ C CN C CS C C Relted Equipment D- 4 1 ydrulic luid Comptibility Effective cushion stroke ccessories (Options) ydrulic fluid Stndrd minerl hydrulic fluid W/O hydrulic fluid O/W hydrulic fluid Wter/Glycol hydrulic fluid Phosphte hydrulic fluid Comptibility Comptible Comptible Comptible Not comptible Not comptible nuckle brcket, Single knuckle Double knuckle, rcket pin, nuckle pin Rod boot Note) Nylon trpulin Neoprene cloth Note) ximum mbient temperture: Nylon trpulin (6 C) Neoprene cloth ( C) Courtesy of Steven Engineering, Inc.-3 Ryn Wy, South Sn rncisco, C 4-7-in Office: (6) --Outside Locl re: () --www.stevenengineering.com 3
Series C Theoreticl Output Unit: N Rod size Operting direction Piston re (mm ) Operting pressure (P) 1 1.. 3 3. 4 OUT IN 7 7 6 3 4 33 31 7 OUT IN 1 4 1 4 4 4 3 4 7 671.4 OUT IN 31 3 31 3 4676 4 4 6 7 6 1 11 31 OUT IN 41 4 6 1 33 1. OUT IN 4 4 4 4 1 6 7 7 16 6 4. OUT IN 17 17 4 3 4 64 6 4 7 4 OUT IN 3 4 4 3 6 46 4 71 646 ss Series C (uilt-in mgnet) Unit: kg 4 1 sic style () 1.3..6 4.3 ( mm stroke) sic mss xil foot style lnge style Single clevis style Double clevis style Rod trunnion style (L) (, G) (C) (D) (U) 1. 1.6 1.7 1. 1.6..4.6..4 3. 3. 3.6 3. 3.1 6.4.. 6. 1.....4 Center trunnion style (T) 1.7. 3.4.. dditionl mss per 1 mm stroke..7... Clcultion (Exmple) CL-1 sic mss. (foot type, ø) dditionl mss.7/1 mm stroke Cylinder stroke 1 mm. +.7 x 1 / 1 = 3.6 kg Series C (Steel tube) Unit: kg 4 1 sic style () 1..1.7 4.7 7.1.. ( mm stroke) sic mss xil foot style lnge style Single clevis style Double clevis style Rod trunnion style (L) (, G) (C) (D) (U). 1.7 1.. 1.7 3.1.6. 3.1.6 3. 3. 3.6 3. 3. 6..7 6.3 7. 1.6..6 1. 1...1..7.7 6.7..6 3.6 Center trunnion style (T) 1.. 3.4 6....7 dditionl mss per 1 mm stroke...1.1.4.31. 3 Courtesy of Steven Engineering, Inc.-3 Ryn Wy, South Sn rncisco, C 4-7-in Office: (6) --Outside Locl re: () --www.stevenengineering.com
Tie-rod Type ydrulic Cylinder Double cting/single Rod Series C Construction r!! iq @ e y @3 @t!6!7 w!1!!3 o!4! @1 u! @ ø4 CQ Prts List No. Description teril Note 1 Rod cover ed cover luminum lloy luminum lloy 7% flt blck 7% flt blck 3 Cylinder tube luminum lloy rd nodized Crbon steel 4 6 7 1 1 1 3 Piston rod Piston Cushion ring Needle vlve ushing Tie-rod Tie-rod wsher Piston nut Needle vlve nut Tie-rod nut ir relese vlve Check bll Wer ring Cushion sel Wiper ring Rod sel Piston sel Needle vlve sel Cylinder tube gsket Piston gsket Crbon steel luminum lloy Rolled steel Rolled steel Led bronze Crbon steel Steel wire Rolled steel Crbon steel Crbon steel lloy steel ering steel Resin NR NR NR NR NR NR rd chromium electroplted Replcement Prts: Sel it Sel kit no. 4 C4-PS C-PS C-PS C-PS 1 C1-PS C-PS C-PS Content Nos.!7 to @ from the chrt t left Sel kit consists of items!7 through @ nd cn be ordered using the sel kit number for ech bore size. C CN C CS C C Relted Equipment D- 3 Courtesy of Steven Engineering, Inc.-3 Ryn Wy, South Sn rncisco, C 4-7-in Office: (6) --Outside Locl re: () --www.stevenengineering.com
Series C Dimensions sic style: C Width cross flts G 4 x J G ir relese G x Rc P V T Cushion djustment screw øe W W R (mx.) Q N N S + Stroke ZZ + Stroke With rod boot 1 l f h + l ZZ + l + Stroke 4 1 4 1 D d E G G G J N N P Q R S T V W 3 3 1 6 1 3 6. 1.1 1.1 6.1.4 4.6.6.74 6.74 3 3...74 4 4 1... 4.74 1.7 Without rod boot With rod boot ZZ e f h l ZZ 1 6 7 6 3 stroke 3 1 6 1 1 3 1 1 61 1 3 1/ stroke 4 1 3. 1 1. x 1. 1 x 1. 1 x 1. x 1. x 1. x x 6 1 1 4 x 1. x 1. x 1. x 1. x x 33 x 3 3 3 4 6 6 3 3 3 3/ 3/ 1/ 1/ 1/ 3/4 37 7 4 1 1 7 7 7 7. 1 4 1 3 Courtesy of Steven Engineering, Inc.-3 Ryn Wy, South Sn rncisco, C 4-7-in Office: (6) --Outside Locl re: () --www.stevenengineering.com
Tie-rod Type ydrulic Cylinder Double cting/single Rod Series C oot style: CL G ir relese G 4 x J x Rc P V T Cushion djustment screw R (mx.) Width cross flts G W W 4 x øld L ±. LY LT N N Y X S + Stroke X Y LS + Stroke ZZ + Stroke LX øe With rod boot h + l 1 l f ZZ + l + Stroke CQ C CN C CS C C Relted Equipment 4 1 3 3 4 1 6 1 4 6 3 6 1 1 4 D. 1.1 1.1 6.1... d.4.. 4 E 4.6.6.74 6.74.74.74 1.7 G G G J LD L LS LT LX LY N N 3 3. 1 1. x 1. 1 x 1. 1 x 1. x 1. x 1. x x 6 1 6 31 1 1 1 3 6 1. 17 1 x 1. x 1. x 1. x 1. x x 33 x 3 3 3 4 6 6 3 3 3 D- 4 1 P R S T V W X Y 3/ 3/ 1/ 1/ 1/ 3/4 37 7 4 1 1 7 7 7 7. 1 4 1 3 37 4 6 1 1 Without rod boot ZZ 1 7 1 37 3 e 6 6 1 1 With rod boot f 3 3 h 1 3 3 1 l stroke 1/ stroke ZZ 33 1 6 6 3 3 6 Courtesy of Steven Engineering, Inc.-3 Ryn Wy, South Sn rncisco, C 4-7-in Office: (6) --Outside Locl re: () --www.stevenengineering.com 3
Series C Dimensions Rod flnge style: C x Rc P Width cross flts G øe W W Y R (mx.) G ir relese G 4 x ød 4 x J V T Cushion djustment screw T N N S + Stroke ZZ + Stroke X Z With rod boot 1 l f h + l ZZ + l + Stroke 4 1 4 1 D d E D T X Y Z G G G J N N P 3 3 4 R S T V W 37 7 4 1 1 1 7 7 7 6 1 4 6 1 4 3 6 1 7. 1 4 1. 4.6 1 1.1.6 1 1.1.4.74 3 6.1 6.74 3...74...74. 4 1.7 Without rod boot With rod boot ZZ e f h l ZZ 6 33 6 3 stroke 4 3 1 6 1 1 3 6 1 67 1 3 1/ stroke 7 1 3 3 6 1 1 4. 1 1. x 1. 1 x 1. 1 x 1. x 1. x 1. x x 6 6 6 3 x 1. x 1. x 1. x 1. x x 33 x 3 3 3 4 6 6 3 3 3 3/ 3/ 1/ 1/ 1/ 3/4 3 Courtesy of Steven Engineering, Inc.-3 Ryn Wy, South Sn rncisco, C 4-7-in Office: (6) --Outside Locl re: () --www.stevenengineering.com
Tie-rod Type ydrulic Cylinder Double cting/single Rod Series C ed flnge style: CG Width cross flts G 4 x J G ir relese G 4 x ød x Rc P 4 x J V T Cushion djustment screw R (mx.) W W Y N S + Stroke ZZ + Stroke N T X Z øe With rod boot 1 l f h + l ZZ + l + Stroke CQ C CN C CS C C Relted Equipment 4 1 3 3 4 1 6 1 4 3 6 1 D. 1.1 1.1 6.1... d.4.. 4 E 4.6.6.74 6.74.74.74 1.7 3 3 D T 1 1 X Y 3 6 1 Z 1 4 G G. 1 1 G. J x 1. 1 x 1. 1 x 1. x 1. x 1. x x 6 6 6 3 x 1. x 1. x 1. x 1. x x 33 x N 3 3 3 4 N 6 6 3 3 3 P 3/ 3/ 1/ 1/ 1/ 3/4 R 37 7 4 D- 4 1 S T V W 1 1 7 7 7 7. 1 4 1 Without rod boot ZZ 1 3 1 3 e 6 6 1 1 With rod boot f 3 3 h 1 3 3 1 l stroke 1/ stroke ZZ 1 6 Courtesy of Steven Engineering, Inc.-3 Ryn Wy, South Sn rncisco, C 4-7-in Office: (6) --Outside Locl re: () --www.stevenengineering.com 31
Series C Dimensions Single clevis style: CC Width cross flts G 4 x J G ir relese G øcd x Rc P V T Cushion djustment screw CX ±.3 With rod boot øe R (mx.) W W N N U S + Stroke L Z + Stroke ZZ + Stroke.3 RR 1 l f h + l Z + l + Stroke ZZ + l + Stroke 4 1 4 1 CD CX D d E G G G J L N N P R RR S 3 3 4 T 1 U 1 3 6 3 3 4 6 1 4 V 7. 1 4 3 6 1 W 1 +. +. +. +. +. +. +. 1 3 31 41 4. 1.1 1.1 6.1....4.. 4 4.6.6.74 6.74.74.74 1.7 3 3 Without rod boot With rod boot Z ZZ e f h l Z ZZ 4 1 3 4 6 46 64 6 3 stroke 6 4 6 4 3 1 31 1 7 3 1 3 31 3 1 3 1 3 1/ stroke 3 1 3 1 1 1. 1 1. x 1. 1 x 1. 1 x 1. x 1. x 1. x x 6 3 4 4 6 x 1. x 1. x 1. x 1. x x 33 x 3 3 3 4 6 6 3 3 3 3/ 3/ 1/ 1/ 1/ 3/4 37 7 4 4 6 3 1 1 7 7 7 3 Courtesy of Steven Engineering, Inc.-3 Ryn Wy, South Sn rncisco, C 4-7-in Office: (6) --Outside Locl re: () --www.stevenengineering.com
Tie-rod Type ydrulic Cylinder Double cting/single Rod Series C Double clevis style: CD Width cross flts G 4 x J G ir relese G øcd x Rc P V T Cushion djustment screw W W R (mx.) N N U Z + Stroke S + Stroke L.3 RR CX ±.3 ZZ + Stroke With rod boot CQ C CN øe C CS 1 l f h + l C Z + l + Stroke ZZ + l + Stroke C Relted Equipment 4 1 3 3 4 1 6 1 4 3 6 1 CD ø ø ø ø ø ø ø +. +. +. +. +. +. +. CX 4 3 4 D d E. 1.1 1.1 6.1....4.. 4 4.6.6.74 6.74.74.74 1.7 3 3 G G. 1 1 G. J x 1. 1 x 1. 1 x 1. x 1. x 1. x x 6 L 3 4 4 6 x 1. x 1. x 1. x 1. x x 33 x N 3 3 3 4 N 6 6 3 3 3 P 3/ 3/ 1/ 1/ 1/ 3/4 R 37 7 4 RR 4 6 3 S 1 1 7 7 7 D- 4 1 T U 1 3 6 3 3 4 V 7. 1 4 W 1 Without rod boot 1 1 Z 4 6 7 3 ZZ 1 4 3 3 e 6 6 1 1 f 3 3 With rod boot h 1 3 3 1 l stroke 1/ stroke Z 3 46 6 31 3 1 ZZ 4 64 4 31 3 1 1 Courtesy of Steven Engineering, Inc.-3 Ryn Wy, South Sn rncisco, C 4-7-in Office: (6) --Outside Locl re: () --www.stevenengineering.com 31
Series C Dimensions Center trunnion style: CT Width cross flts G Z + 1/ stroke G x Rc P ir relese TT ir relese G 4 x J V T Cushion djustment screw R (mx.) TR øe øtde W W TY N ZZ + Stroke S + Stroke N TX TZ. With rod boot 1 l f h + l Z + l + 1/ stroke ZZ + l + Stroke D d E G G G J N N P R S T Tde 4 1 3 3 4 1 6 1 4 3 6 1. 1.1 1.1 6.1....4.. 4 4.6.6.74 6.74.74.74 1.7 3 3. 1 1. x 1. 1 x 1. 1 x 1. x 1. x 1. x x 6 1 1 1 x 1. x 1. x 1. x 1. x x 33 x 3 3 3 4 6 6 3 3 3 3/ 3/ 1/ 1/ 1/ 3/4 37 7 4 1 1 7 7 7.3..3..3..4.. 3.. 3... 4 1 TR R. R. R. R. R. R. R. TT 4 6 6 4 4 TX 7 3 1 TY 6 7 6 TZ 4 4 V 7. 1 4 W 1 Without rod boot 1 1 Z 3 1 6 7. ZZ 6 3 e 6 6 1 1 f 3 3 With rod boot h 1 3 3 1 l stroke 1/ stroke Z 7 6 13 13 1. ZZ 1 3 6 3 33 3 Courtesy of Steven Engineering, Inc.-3 Ryn Wy, South Sn rncisco, C 4-7-in Office: (6) --Outside Locl re: () --www.stevenengineering.com
Tie-rod Type ydrulic Cylinder Double cting/single Rod Series C Rod trunnion style: CU Z Width cross flts G TT G ir relese G 4 x J R (mx.) TR x Rc P V T Cushion djustment screw W W øtde TY N N S + Stroke ZZ + Stroke TX. TZ øe Z + l 1 l f h + l ZZ + l + Stroke CQ C CN C CS C C Relted Equipment 4 1 3 3 4 1 6 1 4 3 6 1 D. 1.1 1.1 6.1... d.4.. 4 E 4.6.6.74 6.74.74.74 1.7 3 3 G G. 1 1 G. J x 1. 1 x 1. 1 x 1. x 1. x 1. x x 6 1 x 1. x 1. x 1. x 1. x x 33 x N 3 3 3 4 N 6 6 3 3 3 P 3/ 3/ 1/ 1/ 1/ 3/4 R 37 7 4 S 1 1 7 7 7 T Tde.3..3..3..4.. 3.. 3... D- 4 1 TR R. R. R. R. R. R. R. TT 3 TX 7 3 1 TY 6 1 4 TZ 4 4 V 7. 1 4 W 1 Without rod boot 1 1 Z 6 7 3 3 ZZ 1 3 e 6 6 1 1 f 3 3 With rod boot h l stroke 1 3 1/ 3 stroke 1 Z 4 1 1 ZZ 7 6 3 33 Courtesy of Steven Engineering, Inc.-3 Ryn Wy, South Sn rncisco, C 4-7-in Office: (6) --Outside Locl re: () --www.stevenengineering.com 33
Series C ccessories (Options) rcket pin C1 x drill through E C1 øc C (f) Size Tolernce D E 4 1 4 3 7 7 4 3 4 1..........3..3..3 3 4 4 7. 7. 7. Note) Does not come with other ccessories. teril: Crbon steel lt wsher Cotter pin pplicble cylinder type Order no. Polished round SPCC ø3 x l SWR Polished round SPCC ø4 x l SWR Polished round SPCC ø4 x l SWR Polished round SPCC ø x l SWR Polished round SPCC ø x 3l SWR Polished round SPCC ø x l SWR Polished round 4SPCC ø x l SWR ø4 clevis type ø clevis type ø clevis type ø clevis type ø1 clevis type ø clevis type ø clevis type C-C1- bore size nuckle brcket ø counter bore depth D drill through C ±.3 L øu G.3 E 3 øj counter bore C D E G 4 1 3 6 1 6 1 4 1 3 31 41 4 1 3 6 3 3 4 3 4 4 6 3 6 67 74 1 Note) Does not come with other ccessories. J 4 6 1 1 3 3 31 teril: Cst iron L U() exgon pplicble Order Size Tolernce mounting bolt cylinder type no. +. R +. R +. R x 1 x 1 x ø4 double clevis type ø double clevis type ø double clevis type C-1- +. R bore x ø double clevis type +.33 size R4 x 3 ø1 double clevis type +.33 R6 +.33 R3 x x 4 ø double clevis type ø double clevis type nuckle pin C1 x drill through C1 E øc C (f) Size Tolernce 4 1 1. 4. 64. 71. 4 41.. 4. 61. 7 7..........3..3 D 3 3 4 4 Note) Does not come with other ccessories. E 7. lt wsher Polished round SPCC Polished round SPCC Polished round SPCC Polished round SPCC Polished round SPCC Polished round SPCC teril: Crbon steel Cotter pin pplicble cylinder type Order no. ø3 x l SWR ø4 ll types ø3 x l SWR ø ll types C-D1- ø4 x l SWR ø ll types bore ø4 x l SWR ø ll types size ø x 3l SWR ø1, ø ll types ø x 3l SWR ø ll types nuckle. Spring pin hole Drilled fter ssembly d 4 l C G 1 ø øl 4 1 67 7 6 7 1 C 6 3 d () D E Size Tolernce +. x 1. +. x 1. +. 3 x 1. +. x 1. +.33 4 x +.33 33 x 6 3 4 4 Reference G 3 1 3 4 3 L() Size Tolernce 4. 1. 6 1.3 7 6.3. 1 +. +. +.3 +. +.3 +. +.3 +. +.64 +. +.64 +. l 4 4 4 4 Spring pin teril: Crbon steel pplicble cylinder type 3 x W ø4 ll types 3 x W ø ll types 4 x W ø ll types 4 x W ø ll types ø1, ø x 4W ll types x W ø ll types Order no. C-1- bore size Y-type knuckle E C J R D P øn ø øl G 4 Spring pin hole Drilled fter ssembly d () C D E G J L N Size Tolernce Size Tolernce Size Tolernce 4 1 67 7 6 7 3 3 46 3 3 3 33 4 6 7 x 1. x 1. x 1. x 1. x 1 1 1 1 1 3 4 1 1 6...3.3. 1 4 37 1 33 x 1 +. +. +. +. +.33 +.33 +. +. +. +. +. +. +. +. +.3 +. +.3 +. +.3 +. +.64 +. +.64 +. P 3 3 4 teril: Crbon steel Spring pin pplicble cylinder type Order no. 3 x W ø4 ll types 3 x W ø ll types 4 x W ø ll types C-3Ybore 4 x W ø ll types size ø1, ø x 4 W ll types x W ø ll types Courtesy of Steven Engineering, Inc.-3 Ryn Wy, South Sn rncisco, C 4-7-in Office: (6) --Outside Locl re: () --www.stevenengineering.com
CQ C CN C CS C C Relted Equipment D- Courtesy of Steven Engineering, Inc.-3 Ryn Wy, South Sn rncisco, C 4-7-in Office: (6) --Outside Locl re: () --www.stevenengineering.com 3
Series C uto Switch Specifictions Refer to pges 7 to 46 for detiled specifictions. uto Switches: Proper ounting Positions nd ounting eights for Stroke End Detection <Tie-rod mount type> D- / V D- W/ WV D- L/ VL D- / V pprox. t pprox. s uto switch pprox. s D- /J D-NTL D- W/JW D-L/ D- /6 D-W 33 pprox. t pprox. t <nd mount type> G 1/ (pplicble cble O.D. ø6. to ø.6) pprox. s D-G3/3 D-3 6 4 uto switch G 1/ (pplicble cble O.D. ø6. to ø.6) pprox. s D- 6 4 uto switch uto switch pprox. s D- /6. 33 Courtesy of Steven Engineering, Inc.-3 Ryn Wy, South Sn rncisco, C 4-7-in Office: (6) --Outside Locl re: () --www.stevenengineering.com
Tie-rod Type ydrulic Cylinder Double cting/single Rod Series C uto Switch Proper ounting Positions D- / V D- /J D- W/ WV D- W/JW D- L/ VL D-/L D-NTL 4 1. 1 3. 3. 1. 3 4. 31. 3. 1. 1 3... 3 4. 6 3... 1.. 3 1...... 1. 1. 1. 3. 1.. Note 1) The uto switches listed below cnnot be mounted on ø. D-G,, G W, W, GL, G, GNTL,, 64, nd W Note ) djust the uto switch fter confirming the operting conditions in the ctul setting. D-G / D-G W/W D-G/GL D-G3 /3 D- / V D- /6 D-W D- /64 D-W D-3 / D-GNTL 1...... 1... 1...... 1.... 4. 1...... 1 uto Switch ounting eights D- / W D- L D- s t D- V/ WV D- VL D- V s t D- /J D- W/JW D-/L D-NTL s t D- /6 D-W s t D-G / D-G W/W D-G/GL D-GNTL D- /64 D-W s D-G3 /3 D-3 s D- s CQ C CN 4 31 3 31 3 4 31 3 33. 3 3. 33. 3. 7. 7. C 4 4 4. 4 4. 6 1 7 1 3. CS 1.. The uto switches listed below cnnot be mounted on ø. D-G,, G W, W, GL, G, GNTL,, 64, nd W 6. 7 4 C C Operting Rnge uto switch model D- / V D- W/ WV D- L/ VL D- /J / D- W/JW D-L/NTL D-G //G D-G W/W D-GL/GNTL D-G3/3 D- / V D- /6 D-W D- /64 D-W D-3 / 4 3. 4.. 7... 1 3. 4... 1 4. 1... The uto switches listed below cnnot be mounted on ø. D-G,, G W, W, GL, G, GNTL,, 64, nd W Since this is guideline including hysteresis, not ment to be gurnteed. (ssuming pproximtely ±3% dispersion.) There my be the cse it will vry substntilly depending on n mbient environment. 4. 4. 1.... 1. 4. 1.. Relted Equipment D- Courtesy of Steven Engineering, Inc.-3 Ryn Wy, South Sn rncisco, C 4-7-in Office: (6) --Outside Locl re: () --www.stevenengineering.com 3
Series C inimum Strokes for uto Switch ounting uto switch types D- / W D- V/ WV D- L D- VL D- D- V D-, 6 D-, J D-W D- W, JW D- D- D-NT D-, 64 D-W D-3 D-G3 D-3 D- 3 n: Number of uto switches Number of uto switches ounting brckets Center trunnion type other thn center trunnion ø4 ø ø ø ø1 1 or pcs. (different surfces/sme surfce) (n ) "n" pcs. (sme surfce) + 4 + 4 + 4 + 4 + 4 + 4 (n =, 4, 6, ) (n = 4,,, ) (n = 4,,, ) (n = 4,,, ) (n = 4,,, ) (n = 4,,, ) 1 or pcs. (different surfces/sme surfce) 1 6 6 7 (n ) "n" pcs. (sme surfce) 1 + 3 + 3 + 3 6 + 3 6 + 3 7 + 3 (n =, 4, 6, ) (n = 4,,, ) (n = 4,,, ) (n = 4,,, ) (n = 4,,, ) (n = 4,,, ) 1 or pcs. (different surfces/sme surfce) 1 (n ) "n" pcs. (sme surfce) + 4 + 4 + 4 + 4 + 4 1 + 4 (n =, 4, 6, ) (n = 4,,, ) (n = 4,,, ) (n = 4,,, ) (n = 4,,, ) (n = 4,,, ) 1 or pcs. (different surfces/sme surfce) 6 6 6 (n ) "n" pcs. (sme surfce) + 3 6 + 3 6 + 3 6 + 3 + 3 + 3 (n =, 4, 6, ) (n = 4,,, ) (n = 4,,, ) (n = 4,,, ) (n = 4,,, ) (n = 4,,, ) 1 or pcs. (different surfces/sme surfce) (n ) "n" pcs. (sme surfce) + 4 + 4 + 4 + 4 + 4 + 4 (n =, 4, 6, ) (n = 4,,, ) (n = 4,,, ) (n = 4,,, ) (n = 4,,, ) (n = 4,,, ) 1 or pcs. (different surfces/sme surfce) 1 6 6 (n ) "n" pcs. (sme surfce) 1 + 3 + 3 + 3 + 3 6 + 3 6 + 3 (n =, 4, 6, ) (n = 4,,, ) (n = 4,,, ) (n = 4,,, ) (n = 4,,, ) (n = 4,,, ) 1 or pcs. (different surfces/sme surfce) 1 1 1 "n" pcs. (sme surfce) (n ) 1 + 1 + 1 + + + (n = 4,,, (n =, 4, 6, ) ) (n = 4,,, ) (n = 4,,, ) (n = 4,,, ) pcs. (different surfces/sme surfce) 1 1 "n" pcs. (sme surfce) (n ) + 1 + 1 + + + (n = 4,,, (n =, 4, 6, ) ) (n = 4,,, ) (n = 4,,, ) (n = 4,,, ) 1 pc. 1 1 1 or pcs. (different surfces/sme surfce) (n ) "n" pcs. (sme surfce) + + + + + (n =, 4, 6, ) (n = 4,,, ) (n = 4,,, ) (n = 4,,, ) (n = 4,,, ) Different surfces Sme surfce (n ) + + + Different surfces (n =, 4, 6, ) (n = 4,,, ) (n = 4,,, ) Sme surfce + (n ) + (n ) (n =, 3, 4 + (n ) ) (n =, 4, 6, ) (n =, 4, 6, ) 1 pc. 1 Different surfces Sme surfce Different surfces (n ) + + + (n =, 4, 6, ) (n = 4,,, ) (n = 4,,, ) Sme surfce + (n ) (n =, 3, 4 + (n ) ) (n =, 4, 6 + (n ) ) (n =, 4, 6, ) 1 pc. pcs. "n" pcs. pcs. "n" pcs. pcs. "n" pcs. pcs. "n" pcs. Different surfces Sme surfce Different surfces Sme surfce 1 pc. Different surfces Sme surfce Different surfces Sme surfce 1 pc. + 3 (n ) (n =, 3, 4 ) 1 + 1 (n ) (n =, 3, 4 ) 1 + 3 (n ) (n =, 3, 4 ) + (n ) (n =, 3, 4 ) 1 + 3 (n ) (n =, 4, 6, ) + 3 (n ) (n =, 4, 6, ) + (n ) (n =, 4, 6, ) 1 + 3 (n ) (n =, 4, 6, ) 1 + 1 (n ) (n =, 4, 6, ) + 3 (n ) (n =, 4, 6, ) + (n ) (n =, 6, ) + 3 (n ) (n =, 4, 6, ) + 3 (n ) (n =, 4, 6, ) + (n ) (n =, 4, 6, ) Courtesy of Steven Engineering, Inc.-3 Ryn Wy, South Sn rncisco, C 4-7-in Office: (6) --Outside Locl re: () --www.stevenengineering.com
Tie-rod Type ydrulic Cylinder Double cting/single Rod Series C uto Switch ounting rckets: Prt Nos. <Tie-rod mounting> uto switch models D- / V/ W/ WV D- L/ VL/ / V D- /J / W/JW D-L//NTL D- /6 /W <nd mounting> uto switch models D-G3/3/3 / D-G / D-G W/W/GL/G D-GNTL/ /64/W Note 1) ø4 7-4 T-4 ø4 D1-4 -4 [Stinless steel mounting screw kits] The following stinless steel mounting screw kits re vilble for use depending on the operting environment. (Switch mounting bnds re not included nd should be ordered seprtely.) 1 : D-, J,, 6 3 : D-G,,, 6 ø 7- T-6 ø D1- - Note ) Refer to the tble below for detils on 1, 3. ø 7- T-6 ø D1-6 Note 1) The uto switches listed below cnnot be mounted on ø. D-G,, G W, W, GL, G, GNTL,, 64, nd W Stinless mounting screw kit detils Prt no. 1 Contents No. Description Size Pcs. 1 uto switch mounting screws 4 x.7 x L 1 3 Set screw Set screw 4 x.7 x 6L 4 x.7 x L 3 4 uto switch mounting screws 4 x.7 x L 1 ø 7- T- ø D1- - pplicble uto switch mounting brcket prt nos. T- T-3, T-4, T- T-6, T-, T- 4-4, 4-, 4-4-3, 4- -3 7-4, 7-, 7- T-, T-, T- S4-, S4- S4-, S4- S-, S- S-, S- -1, -, -3, -4 -, -6, -, -1 -, - -3, -4 -, N-, SG1-3 -4, - -, -1-3, -4, - -6, -, -1 ø1 7- T- ø1 D1-1 -1 pplicble uto switches D-, 6 D-, J D-Z7, Z D-Y, Y6, Y7 D- D- D-, 6 D-, J D-Z7, Z D-Y, Y6, Y7 D- D- D-, 6 D-G, ounting exmple for D- (V), W(V), (V)L. When D-L nd GL uto switches re shipped mounted on cylinder, the bove stinless steel screws re used. lso when switches re shipped seprtely, 1, 3 re included. Note 3) When using D- (V)L, order stinless mounting screw kit 1 insted of the iron uto switch mounting brckets (7-, S- ) in the tble bove, nd use the 4 x 6L stinless set screws included. CQ C CN C CS C C Relted Equipment D- esides the models listed in ow to Order, the following uto switches re pplicble. Refer to pges 7 to 46 for detiled uto switch specifictions. uto switch type Prt no. Electricl entry etures Solid stte Reed D-NV, PV, V D-NWV, PWV, WV D-NVL, PVL, VL D-, P, J D-W, PW, JW D-L D-NTL, GNTL D-3V, 6V D-V D-3, 6, 3 D-67 Grommet (perpendiculr) Grommet (in-line) Grommet (perpendiculr) Grommet (in-line) Dignostic indiction (-color disply) Wter resistnt (-color disply) Dignostic indiction (-color disply) Wter resistnt (-color disply) With timer Without indictor light Without indictor light Solid stte uto switches re lso vilble with pre-wired connector. Refer to pges nd 3 for detils. Normlly closed (N.C. = b contct), solid stte uto switches (D-G, ) re lso vilble. or detils, refer to pge. Courtesy of Steven Engineering, Inc.-3 Ryn Wy, South Sn rncisco, C 4-7-in Office: (6) --Outside Locl re: () --www.stevenengineering.com 3
Series C ow to ount nd ove the uto Switch <pplicble uto switch> Solid stte D-N(V), D-P(V), D-(V) D-NW(V), D-PW(V), D-W(V) D-N(V), D-P(V), D-(V) uto switch mounting screw. x.4 x 4 l Wtchmker s (precision) screwdriver <pplicble uto switch> Solid stte D-, D-P D-J, D-J1, D-L D-W, D-PW, D-JW D-, D-NTL Reed D-3, D-4, D-6, D-64, D-67 D-W exgon socket hed set screw 4 r uto switch mounting screw (4) w e uto switch Put the uto switch on the surfce of the cylinder tube. Set screw (4) uto switch uto switch mounting brcket q uto switch mounting brcket Tie-rod Tie-rod Cylinder tube 1. ix it to the detecting position with set screw by instlling n uto switch mounting brcket in cylinder tie-rod nd letting the bottom surfce of n uto switch mounting brcket contct the cylinder tube firmly.. ix it to the detecting position with hexgon socket hed set screw (4). (Use hexgon wrench.) 3. it n uto switch into the uto switch mounting groove to set it roughly to the mounting position for n uto switch. 4. fter confirming the detecting position, tighten up the mounting screw (.) ttched to n uto switch, nd secure the uto switch.. When chnging the detecting position, crry out in the stte of 3. 1. ix the uto switch on the uto switch mounting brcket with the uto switch mounting screw (4) nd instll the set screw.. it the uto switch mounting brcket into the cylinder tie-rod nd then fix the uto switch t the detecting position with the hexgonl wrench. (e sure to put the uto switch on the surfce of cylinder tube.) 3. When chnging the detecting position, loosen the set screw to move the uto switch nd then re-fix the uto switch on the cylinder tube. (Tightening torque of 4 screw should be 1 to 1. N m.) Note 1) To protect uto switches, ensure tht min body of n uto switch should be embedded into uto switch mounting groove with depth of mm or more. Note ) Set the tightening torque of hexgon socket hed set screw (4) to be 1 to 1. N m. Note 3) When tightening n uto switch mounting screw (.), use wtchmker s screwdriver with grip dimeter of to 6 mm. lso, set the tightening torque to be. to. N m. s guide, turn from the position where it comes to feel tight. 33 Courtesy of Steven Engineering, Inc.-3 Ryn Wy, South Sn rncisco, C 4-7-in Office: (6) --Outside Locl re: () --www.stevenengineering.com
CQ C CN C CS C C Relted Equipment D- Courtesy of Steven Engineering, Inc.-3 Ryn Wy, South Sn rncisco, C 4-7-in Office: (6) --Outside Locl re: () --www.stevenengineering.com 331
3. P Tie-rod Type ydrulic Cylinder Double cting/double Rod Series CW ø4, ø, ø, ø, ø1, ø, ø With uto Switch uilt-in gnet Cylinder odel uilt-in mgnet If built-in mgnet cylinder without uto switch is required, there is no need to enter the symbol for the uto switch. (Exmple) CDW-1 Nil CW L 4 1 L CDW 4 1 W L T U Tube mteril luminum lloy Steel tube ounting style sic style xil foot style Rod flnge style Center trunnion style Rod trunnion style ow to Order 4 1 4 1 4 mm mm mm mm 1 mm mm mm 4 mm mm mm mm 1 mm luminum tube luminum tube Steel tube Cylinder stroke Refer to the stndrd stroke tble on pge 333. Cylinder option Nil N Cushion R uto switch type Nil Without uto switch Select pplicble uto switch models from the tble below. Number of uto switches Nil S 3 n oth sides Without cushion With rod cushion With hed cushion pcs. 1 pc. 3 pcs. "n" pcs. pplicble uto Switches: Refer to pges 7 to 46 for further detils on ech uto switch. Type Reed switch Solid stte switch Specil function Lod voltge uto switch model Led wire length (m) Electricl Wiring entry (output). 1 3 DC C Tie-rod mount nd mount None (Nil) () (L) (Z) N 3-wire (NPN) G V, V P 3-wire (PNP) Grommet 4 V GP V -wire 1 V, V J1 Terminl 3-wire (NPN) V, V G3 conduit -wire V 3 Dignostic indiction (-color disply) Indictor light Yes 3-wire (NPN) 3-wire (PNP) 4 V V, V NW PW W pplicble lod Grommet -wire V W 3-wire (NPN) N V, V Wter resistnt 3-wire (PNP) P IC circuit (-color disply) -wire V G Dignostic output (-color disply) 4-wire (NPN) V, V G IC circuit 3-wire (NPN equiv.) V 6 IC circuit Yes 1 V 3 Grommet No 1 V or less IC circuit Rely Yes 1 V, V 4 4 PLC No V V or less 64 64 -wire 4 V Terminl 33 PLC conduit Yes 1 V, V Rely DIN terminl PLC Dignostic indiction (-color disply) Grommet W W Led wire length symbols:. m Nil (Exmple) NW Solid stte uto switches mrked " " re produced upon receipt of order. 1 m (Exmple) NW Types D-G,, G W, W, GL, G, GNTL,, 64, nd W 3 m L (Exmple) NWL cnnot be mounted on ø bore size cylinders. m Z (Exmple) NWZ Since there re pplicble uto switches other thn listed, refer to pge 3 for detils. or detils bout uto switches with pre-wired connector, refer to pges nd 3. D-,, W, L uto switches re shipped together (not ssembled). (Only uto switch mounting brckets re pcked ssembled.) 33 Courtesy of Steven Engineering, Inc.-3 Ryn Wy, South Sn rncisco, C 4-7-in Office: (6) --Outside Locl re: () --www.stevenengineering.com GW GPW Pre-wired connector IC circuit IC circuit IC circuit Rely PLC
Tie-rod Type ydrulic Cylinder Double cting/double Rod Series CW Light Principle prts re light weight luminum lloy. Esy position detection: with uto switches luminum cylinder sizes ø4 to ø1 re uto switch cpble for esy stroke position detection. Smooth cushioning Cushioning nerly equl to shock bsorber is chieved with unique cushion ring configurtion nd cushion sel design. JIS symbol Specifictions with included uto switch re the sme for Double cting/single Rod. Refer to pges to 331. inimum Strokes for uto Switch ounting uto Switches: Proper ounting Positions nd ounting eights for Stroke End Detection Operting Rnge uto Switch ounting rckets: Prt Nos. odels odel CW CW Tube mteril luminum lloy Steel Specifictions ction luid Nominl pressure Proof pressure ximum llowble pressure inimum operting pressure mbient nd fluid temperture Piston speed Cushion Stroke length tolernce ounting 4,,,, 1 4,,,, 1,, Note) Refer to pge 4 for definitions of terms relted to pressure. Stndrd Strokes Stndrd strokes 4 to to to to 1 1 to 1 to 1 to Note) Refer to the stroke selection Tble in Technicl Dt, strting with pges 3 nd 4 to determine stroke limittion depending on the type of mounting brckets tht will be used. Then mke your selection. 4 1 Double cting/double rod ydrulic fluid 3. P. P 3. P. P Without uto switch: 1 to C With uto switch: 1 to 6 C to 3 mm/s Cushion sel +. +1. +1. to 1st, 1 to st, to st +1.4 +1. to 1st, 1 to st sic style (), xil foot style (L), Rod flnge style () Center trunnion style (T), Rod trunnion style (U) Cushion Strokes (or Rod Side nd ed Side) Effective cushion stroke CQ C CN C CS C C Relted Equipment D- ydrulic luid Comptibility ccessories (Options) Refer to pge. ydrulic fluid Comptibility nuckle brcket, Single knuckle Stndrd minerl hydrulic fluid Comptible Double knuckle, rcket pin, nuckle pin W/O hydrulic fluid Comptible Rod boot Note) Nylon trpulin O/W hydrulic fluid Comptible Neoprene cloth Wter/Glycol hydrulic fluid Not comptible Note) ximum mbient temperture: Phosphte hydrulic fluid Not comptible Nylon trpulin (6 C) Neoprene cloth ( C) Courtesy of Steven Engineering, Inc.-3 Ryn Wy, South Sn rncisco, C 4-7-in Office: (6) --Outside Locl re: () --www.stevenengineering.com 333
Series CW ss luminum tube ( mm stroke) sic mss sic style oot style lnge style Rod trunnion style Center trunnion style dditionl mss per 1 mm stroke Clcultion (Exmple) CWL-1 sic mss 3. (foot type, ø) dditionl mss./1 mm stroke Cylinder stroke 1 mm 3. +. x 1/1 = 4.4 kg Steel tube sic style oot style lnge style Rod trunnion style Center trunnion style dditionl mss per 1 mm stroke ( mm stroke) sic mss Unit: kg 4 1 1. 1. 1.6 1.71 1.6.1. 3..6.7...7 4. 3. 3. 3.. 4. 6.71.4 3.4 3.67.4 6. 1..6...3 Unit: kg 4 1 1..1 1.4 1.6.1.. 3.3.71.7... 4. 3.4 3. 3.6..1 7..7 6.. 7.4 1.3.1 1.3 1..4...1..31.6...4 4.3 3.46.4 3 Courtesy of Steven Engineering, Inc.-3 Ryn Wy, South Sn rncisco, C 4-7-in Office: (6) --Outside Locl re: () --www.stevenengineering.com
Tie-rod Type ydrulic Cylinder Double cting/double Rod Series CW Construction e!6!7 iq @ w y@1!t @ q!1!!3 o r!4!!u! @ CQ ø4 C Prts List No. 1 3 4 6 7 1 1 1 Description teril Note Rod cover luminum lloy 7% flt blck Cylinder tube luminum lloy rd nodized Crbon steel Piston rod Crbon steel rd chromium electronplted Piston rod Crbon steel rd chromium electronplted Piston luminum lloy Cushion ring Rolled steel Needle vlve Rolled steel ushing Led bronze Tie-rod Crbon steel Tie-rod wsher Steel wire Spring pin Rolled steel Needle vlve nut Crbon steel Tie-rod nut Crbon steel ir relese vlve lloy steel Check bll ering steel Wiper ring NR Rod sel NR Piston sel NR Needle vlve sel NR Cylinder tube gsket NR Piston gsket NR Cushion sel Replcement Prts: Sel it 4 1 Sel kit no. CW4-PS CW-PS CW-PS CW-PS CW1-PS CW-PS CW-PS Content Nos.!6 through @ nd @ from the chrt t left Sel kit consists of items of!6 through @ nd @ nd cn be ordered by using the sel kit number for ech bore size. CN C CS C C Relted Equipment D- 3 Courtesy of Steven Engineering, Inc.-3 Ryn Wy, South Sn rncisco, C 4-7-in Office: (6) --Outside Locl re: () --www.stevenengineering.com
Series CW Dimensions sic style: CW Width cross flts G 4 x J G ir relese G Width cross flts G x Rc P T T V V Cushion djustment screw W W R (mx.) N N S + Stroke + Stroke ZZ + strokes D d E G G J N P R S T V W ZZ 4 1 3 3 4 1 6 1 4 3 6 1. 1.1 1.1 6.1....4.. 4 4.6.6.74 6.74.74.74 1.7 3 3. 1 1 x 1. 1 x 1. 1 x 1. x 1. x 1. x x 6 1 1 4 x 1. x 1. x 1. x 1. x x 33 x 3 3 3 4 3/ 3/ 1/ 1/ 1/ 3/4 37 7 4 4 1 7. 1 4 1 1 1 46 6 3 3 3 Courtesy of Steven Engineering, Inc.-3 Ryn Wy, South Sn rncisco, C 4-7-in Office: (6) --Outside Locl re: () --www.stevenengineering.com
Tie-rod Type ydrulic Cylinder Double cting/double Rod Series CW oot style: CWL G ir relese G + Stroke x Rc P 4 x J T T VV Cushion djustment screw Width cross flts G LT W W N N Y X S + Stroke X Y LS + Stroke ZZ + strokes 4 x øld LT Width cross flts G R (mx.) L ±. LX LY CQ C CN C CS C C Relted Equipment 4 1 3 3 4 1 6 1 4 6 1 4 3 6 1 D. 1.1 1.1 6.1... d.4.. 4 E 4.6.6.74 6.74.74.74 1.7 3 3 G G. 1 1 1 1 J x 1. 1 x 1. 1 x 1. x 1. x 1. x x 6 LD L 6 1 LS 6 LT 1 1 LX 3 6 1 LY. 17 1 x 1. x 1. x 1. x 1. x x 33 x N 3 3 3 4 D- P R S T V W X Y ZZ 4 1 3/ 3/ 1/ 1/ 1/ 3/4 37 7 4 4 1 7. 1 4 1 3 37 4 6 1 1 46 6 3 3 Courtesy of Steven Engineering, Inc.-3 Ryn Wy, South Sn rncisco, C 4-7-in Office: (6) --Outside Locl re: () --www.stevenengineering.com 337
Series CW Dimensions Rod flnge style: CW Width cross flts G G ir relese G Width cross flts G x Rc P T T 4 x ød 4 x J VV R (mx.) Cushion djustment screw W W Y T N N S + Stroke + Stroke ZZ + strokes X Z D d E D T X Y Z G G J N P 4 1 3 3 4 1 6 1 4 6 1 4 3 6 1. 1.1 1.1 6.1....4.. 4 4.6.6.74 6.74.74.74 1.7 3 3 1 1 3 6 1 1 4. 1 1 1 1 x 1. 1 x 1. 1 x 1. x 1. x 1. x x 6 6 6 3 x 1. x 1. x 1. x 1. x x 33 x 3 3 3 4 3/ 3/ 1/ 1/ 1/ 3/4 R S T V W ZZ 4 1 37 7 4 4 1 7. 1 4 1 46 6 3 3 3 Courtesy of Steven Engineering, Inc.-3 Ryn Wy, South Sn rncisco, C 4-7-in Office: (6) --Outside Locl re: () --www.stevenengineering.com
Tie-rod Type ydrulic Cylinder Double cting/double Rod Series CW Center trunnion style: CWT Width cross flts G ZZ + 1/ stroke G ir relese W W TT ir relese G Width cross flts G R (mx.) x Rc P T T 4 x J VV Cushion djustment screw TR øtde TY N N S + Stroke + Stroke ZZ + strokes TX TZ. CQ C CN C CS C C Relted Equipment 4 1 3 3 4 1 6 1 4 3 6 1 D d E G G J N P R S T TDe. 1.1 1.1 6.1....4.. 4 4.6.6.74 6.74.74.74 1.7 3 3. 1 1 x 1. 1 x 1. 1 x 1. x 1. 1 x 1. 1 x x 6 1 1 1 x 1. x 1. x 1. x 1. x x 33 x 3 3 3 4 3/ 3/ 1/ 1/ 1/ 3/4 37 7 4 4 1.3..3..3..4.. 3.. 3... TR R. R. R. R. R. R. R. D- TT TX TY TZ V W Z ZZ 4 1 4 6 6 4 4 7 3 1 6 7 6 4 4 7. 1 4 1 3 1 6 7. 46 6 3 3 Courtesy of Steven Engineering, Inc.-3 Ryn Wy, South Sn rncisco, C 4-7-in Office: (6) --Outside Locl re: () --www.stevenengineering.com 33
Series CW Dimensions Rod trunnion style: CWU Width cross flts G Z TT G ir relese G 4 x J Width cross flts G x Rc P T T V V Cushion djustment screw TR øtde TY R (mx.) W W N N S + Stroke + Stroke ZZ + strokes TX. TZ D d E G G J N P R S T TDe TR 4 1 3 3 4 1 6 1 4 3 6 1. 1.1 1.1 6.1....4.. 4 4.6.6.74 6.74.74.74 1.7 3 3. 1 1 1 1 x 1. 1 x 1. 1 x 1. x 1. x 1. x x 6 1 x 1. x 1. x 1. x 1. x x 33 x 3 3 3 4 3/ 3/ 1/ 1/ 1/ 3/4 37 7 4 4 1.3..3..3..4.. 3.. 3... R. R. R. R. R. R. R. TT TX TY TZ V W Z ZZ 4 1 3 7 3 1 6 1 4 4 4 7. 1 4 1 6 7 3 3 46 6 3 3 Courtesy of Steven Engineering, Inc.-3 Ryn Wy, South Sn rncisco, C 4-7-in Office: (6) --Outside Locl re: () --www.stevenengineering.com