PNEUMATIC RACK & PINION ACTUATOR Automax S-Series DOUBLE ACTING SPRING RETURN 1 Integral travel stops in both directions with 10 degrees of overtravel to assure precise adjustment of both the open and closed positions. 2 Full length gear engagement between piston rack & electroless nickel plated pinion. 3 Flat on pinion drive shaft accommodates wrench overrides and accessories. 4 Field reversible action simply by rotating pistons 180o. AUTOMAX 5 Precision die cast pistons with large cylinder bearings increases efficiency and cycle life 6 Valve, accessory and NAMUR control mounting pads. 7 Corrosion resistant hard anodized aluminum housings with stainless steel fasteners. 8 One compact design for double acting and spring return is easily field-convertible by installing or removing springs.
Watts PNEUMATIC ACTUATOR Series PA and PAS WATTS Double Acting 20 PSIG 40 PSIG 60 PSIG 80 PSIG 100 PSIG 120 PSIG PA180 45 90 135 180 225 270 PA400 100 200 300 400 500 600 PA1000 240 520 800 1 080 1 360 1 640 PA1500 320 700 1 100 1 500 1 900 2 300 PA3000 779 1 558 2 338 3 116 3 896 4 674 PA7000 1 750 3 500 5 250 7 000 8 750 10 500 DOUBLE RACK AND PINION DOUBLE ACTING AND SPRING RETURN 180 to 7000 in./lbs. Torque Output (80 psig) The double acting version (PA) and spring return version (PAS) fully comply with the original design concepts. Hybrid epoxy coated aluminum body and end caps, alodined pistons protect against premature failure due to corrosion and provide superior wear resistance. Using special die casting methods, pistons are produced with maximum density and wear resistance at the gear tooth location. Spring No. of 40 PSIG 60 PSIG 80 PSIG 100 PSIG 120 PSIG Spring Return Springs Start End Start End Strat End Start End Start End Start End 6 60 42 100 82 140 122 180 162 220 202 48 33 8 50 26 90 66 130 106 170 146 210 186 64 44 PAS180 10 - - 80 50 120 90 160 130 200 170 80 55 12 - - 70 34 110 64 150 114 190 154 96 66 14 - - 60 20 100 48 140 98 180 138 112 77 6 122 68 222 168 322 268 422 368 522 468 132 78 8 96 24 196 124 296 224 396 324 496 424 176 104 PAS400 10 - - 170 80 270 180 370 280 470 380 220 130 12 - - 144 36 244 136 344 236 444 336 264 156 14 - - - - 218 92 318 192 418 292 308 182 6 358 232 638 512 918 792 1 178 1 052 1 458 1 332 288 162 8 304 136 584 416 864 696 1 124 956 1 404 1 236 384 216 PAS1000 10 250 40 530 320 810 600 1 070 860 1 350 1 140 480 270 12 - - 476 224 756 504 1 016 764 1 296 1 044 576 324 14 - - 422 128 702 428 962 668 1 242 948 672 378 6 454 280 854 680 1 254 1 080 1 654 1 480 2 054 1 880 420 246 8 372 140 772 540 1 172 940 1 572 1 340 1 972 1 740 560 328 PAS1500 10 - - 690 400 1 090 800 1 490 1 200 1 890 1 600 700 410 12 - - 608 260 1 008 660 1 408 1 060 1 808 1 460 840 492 14 - - 526 120 926 520 1 326 920 1 726 1 320 980 574 6 1 070 690 1 820 1 440 2 620 2 240 3 416 3 036 4 170 3 790 860 480 8 890 460 1 640 1 210 2 440 2 010 3 190 2 760 3 990 3 560 1 090 660 PAS3000 10 750 150 1 500 900 2 300 1 700 3 050 2 450 3 850 3 250 1 400 800 12 - - 1 340 620 2 140 1 420 2 090 2 170 3 690 2 970 1 680 960 14 - - 1 180 340 1 980 1 140 2 730 1 890 3 530 2 690 1 960 1 120 6 2 410 1 520 4 160 3 270 5 910 5 020 7 660 6 770 9 410 8 520 1 980 1 090 8 2 030 860 3 780 2 610 5 530 4 360 7 280 6 110 9 030 7 860 2 640 1 470 PAS7000 10 1 630 200 3 380 1 950 5 130 3 700 6 880 5 450 8 630 7 200 3 300 1 870 12 - - 3 030 1 285 4 780 3 035 6 530 4 785 8 280 6 535 3 965 2 220 14 - - 2 500 625 4 250 2 375 6 000 4 125 7 750 5 875 4 625 2 750
CYLINDRE DE LEVAGE HOIST Part Number Description Numéros de Pièce Cylindre de Levage Hydraulique / Hydraulic Dump Cylinder HA017250 120 DA swivel trunnion HA017280 120 SA HA017308 120 SA HA017249 120 SA swivel trunnion HA017359 140 SA HA017252 159 SA swivel trunnion HA017252 159 SA swivel trunnion HA017026 170 HA017283 180 SA 4 stage HA017401 190 SA 4 stage HA017411 195 SA 4 stage HA017248 72 DA swivel trunnion HA017246 72 SA swivel trunnion FACE FRONT CÔTÉ SIDE Réservoir Vacuum ASYBCO Tank Vacuum Châssis du Camion Truck Frame Valve Réservoir Hydraulique Oil Tank SUPPORT DE CYLINDRE DE LEVAGE HOIST BRACKET FACE FRONT CÔTÉ SIDE FACE FRONT CÔTÉ SIDE
SUPPORT DE POMPES PUMP BRACKET RCF 500 - RCF 1200 ASYBCO FACE FRONT DESSUS TOP DESSOUS BOTTOM
HYDRAULIC OIL RESERVOIR Item Description Qty 1 Oil filler cap 1 2 Hydraulic oil filter 2 3 Filler tube 1 4 Gasket 1 5 3/8 hex bolt x 1 1/4 lg 10 6 Hydraulic oil filter head 1 7 1 1/2 half coupling 1 8 Diffuser 1 9 2 half coupling 1 10 Suction strainer 1 11 Sight gauge assembly 1 Part Number Fig.6 Description A B C i.g. usg Qty CP008205 Hydraulic oil reservoir ass y 16 16 48 45 54 1 CP008503 Hydraulic oil reservoir ass y 30 26 20 56 68 1 CP008206 Hydraulic oil reservoir ass y 14 20 72 73 87 2 CP008207 Hydraulic oil reservoir ass y 16 26 78 117 138 1 CP008366 Hydraulic oil reservoir ass y 16 30 78 135 162 1 Dimensions en pouces ASYBCO 10 2 3 1 8 7 9 6 4 5 Item Part Number Description Qty 1 Hydraulic oil reservoir assembly 1 (provide tank ser. #) 2 HA017185 Double filter assembly 1 3 HA005002 Filter oil (element) 2 4 HA005008 Diffuser oil tank 1 5 HA005010 Suction strainer 1 6 HA005011 Sight gauge assembly 1 7 CP008068 Hydraulic reservoir pipe cap - 6 1 8 FI016360 Breather cap hydraulic pressure assembly 1 9 PF022134 1 1/2 nipple SCH. 40 T.B.E. 6 1/2 long 1 10 HF018028 Fitting nipple 2083-24-24 1
COOLING SYSTEM For Vacuum Pump ASYBCO Item Description Qty 1 Antifreeze filler cap 1 2 Antifreeze sight gauge 1 3 Cooler enclosure and reservoir assembly 1 4 Mounting bracket 2 5 Mounting straps 2 6 Radiator 1 7 Fan blade 1 8 Fan shroud 1 9 Hydraulic fan motor 1 10 Electric fan and motor assembly 1 11 Mounting bracket 1 12 1/4 hex bolt x 1 lg 4 13 1/4 hex nut 4 14 Antifreeze 61. G.
VARIABLE FLOW CONTROL Brand FC Series Specifications See flow chart for capacity. Rated for 3000 psi (207 bar). Weight 7 3/4 lbs. (3.52 kg). 30 - Micron filtration recommended MODEL FCR51 MODEL FC55 MODEL FC 51 BRAND HAND OPERATED HYDRAULIC PUMP Brand HP Series Specifications Volume Displacement Hp22SA - 0.20 in 3 (when handle is pulled). HP61DA - 0.60 in 3 per full cycle. HP121DA - 1.20 in 3 per full cycle. Tank sizes 95 in 3, 80 in 3, 65 in 3 and 50 in 3. TL - 2 inch tank used with remote reservoir. Pressure rating used and (Standard relief setting). HP22SA - 6000 psi (4000 psi) HP61DA - 3000 psi (3000 psi) HP121DA - 2000 psi (2000 psi) Outlet port size #6 SAE (9/16-18) Filler Port Size 1/4 NPT Tank Size: 12-95 Cu. In. 10-80 Cu. In. 8-65 Cu. In. 6-50 Cu. In. 2 - TL #4 SAE Fill Port
NON-ADJUSTABLE FLOW CONTROL Series 83 BRAND Specifications Rated for 0-10 gpm (0-37.9 lpm). Rated for 3000 psi (207 bar). Weight 1/4 lb. (0.11 kg). 30-Micron filtration recommended. Port size #8 SAE (3/4-16). NON-ADJUSTABLE FIXED ORIFICE Series 84 Specifications Orifice DAI. 0-0.250 (0-0.635 cm) Rated for 3000 psi (207 bar). Weight 1/4 lb. (0.11 kg). 30-Micron filtration recommended. Port size #8 SAE (3/4-16). FLUID TEMPERATURE / LEVEL INDICATOR
COUPLINGS COUPLINGS FOR K16 CRIMPER Part No Hose I.D. Thread A B C D HU12-12MB 3/4 3/4-14 3.07 1.59 1.25.61 HU16-16MB 1 1-11 1/2 3.42 1.69 1.38.81 COUPLINGS FOR SC-101-SW SWAGE TOOL Part No Hose I.D. Thread A B C D SC12-12MB 3/4 3/4-14 3.07 1.59 1.25.61 SC16-16MB 1 1-11 1/2 3.42 1.69 1.38.81 PIPE SWIVEL ADAPTERS Part No Hose I.D. Thread A B C D SC12-12RM 3/4-3.70.52.61 - SC16-16RM 1-4.00.53.81 - Style MB Rigid male pipe NPTF dryseal thread Style MB Rigid male pipe NPTF dryseal thread Style RM Hose splicer ASYBCO Max Part No T1 T2 Working A B C D E Pressure 60SG -12x12 3/4-14 3/4-14 5 500 1.66.80 1.25 1.25.66 60SG-16x16 1-11 1/2 1-11 1/2 4 200 1.66.95 1.50 1.50.87 Style 60SG NPTF rigid female to NPSM swivel female
Brand HYDRAULIC RELIEF VALVE Specifications Pressure rating 3000 psi (207 bar) Pressure setting 150-3000 psi (10-207 bar) Weight 2 1/4 lbs (1.0 kg) BRAND MODEL RL75-3000 MODEL RLC75-3000 MODEL RLC16-1500 Brand Side View Front View 4-WAY DIRECTIONAL CONTROL VALVE Specifications Rated 0-5 gpm (0-19 lpm) Rated for 6000 psi (414 bar) Weighs 1.25 lbs. (0.6 kg) Standard port size 1/4 NPT all 30 - Micron filtration recommended Top View Side View Bottom View MODEL HPV4 MODEL HPV4D MODEL HPV4-T4
WATER PRESSURE BALL VALVE Asybco ASYBCO NEEDLE VALVES Asybco FLOW CONTROLS Asybco
Parker Hannifin RACCORDS PNEUMATIQUES PUSH-IN FITTINGS Pour Boyaux Flexible / For Flexible Tubing: Nylon, Teflon, Polyurethane Asybco Parker Hannifin Male Connector (Tube to UNF) CHECK VALVES RELIEF VALVE High Capacity Female Connector (Tube to NPT) Male Stud Elbow (Tube to NPT) Male Stud Run Tee (Tube to NPT) Male Stud Branch Tee (Tube to NPT) COUPLERS METAL HIGH FLOW MUFFLERS IN-LINE CHECK VALVES VACUUM RELIEF VALVE
LIVE SWIVEL ADAPTERS Series 59 Style 59SS Style 59UG Style 59UR T1- Flatface Flange T2- PA Flange (code 61) Style 59UA Style 59UH SPECIAL ADAPTERS Style 832-WM Style 59YA T2- Male Pipe Style 895-WM Style 59UB T2- Male ORB Style 59UJ T2-37 o Male Style 59YK T1- Female NPSM T2- Male 37 o Male SAE Flare Style 896-WM Style 59UC T1- Female NPSM Style 59UK T1- Female NPSM T2-37 o Male Style 59YN T1- Male Pipe T2-37 o Male Style 903 & 905-WM Style 59UD T1- Female NPSM T2- Male ORB Style 59UM T2-37 o Male Style 59YJ Style 1031, 1032 & 1033 Style 59UE T1- Male NPSM Style 59UN T2-37 o Male Style 59YR T1- Code 61 Flange/Clamp. T2- Code 61 Flange Style 59UF Style 59US PARKER HANNIFIN T1- Male NPSM T1- UNF (RH) T2- UNF (RH) T1- Male NPSM T2- Male NPSM Paint Adapter T1- Air Brake End O RINGS & LOCK NUTS Style 710-FSO Style 710-TTM Style PA-77 Style TT-77 Style 711BH-FS Style 711BH-TT Style 711-BHM O ring O ring O ring O ring Lock Nut Lock Nut Lock Nut
Supra-Flare 37 O TUBE ADAPTERS PARKER HANNIFIN Style 719-FSO T1- Male ORB T2- Female ORB Style 832-FS Style 842-FS T2-37 o Male Style 847-FS Style 849L-FS Style 852-FS Style 720-FSO T1- Male ORB Style 833-FS T2- Male NPTF Swivel Style 842H-FS Style 848-FS Style 849L-FSO T2- Adj.Male ORB Style 854-FSO Style 721-FSO T1- Male ORB Style 833-FSO T2- Male ORB Swivel Style 842L-FS Style 848-FSO T2- Male ORB Style 849LL-FS Style 854-FS Style 722-FSO T1- Male ORB Style 839-FS Plug Style 844-FS T2-37 o Male Style 848L-FS Style 849LL-FSO Style 854BH-FS Style 725-FSO T1- Adj. Male ORB Style 840-FS Sleeve (Use with 841-FS) Style 845-FS Style 848L-FSO T2- Male ORB Style 850-FS Style 855-FS Style 728-FSO T1- Female O Ring Boss Style 841-F Tube Nut (No sleeve req d) Style 845-FSO Style 849-FS Style 851-FS Style 855BH-FS Style 830-FS T1- ORB Cap Nut Style 841-FS T1- Tube Nut (Use with 840-FS) Style 846-FS Style 849-FSO Style 851-FSO Style 857-FS T2- Adj.Male ORB Style 858-FS Style 861-FS Style 870-FS Style 871-FS Style 872-FS Style 878-FS Style 879-FS T2-37 o Male T2-37 o Female swivel T2-37 o Female swivel T1-37 o Female swivel T2-37 o Female swivel Style 881-FS Style 881-FSO Style 882-FS Style 883-FS Style 889-FS T1-37 o Female swivel T1-37 o Female swivel T2- Male ORB T1-37 o Female swivel T1-37 o Female T2-37 o Male T2-37 o Female
PIPE SWIVEL ADAPTERS Style 60SA Style 60TG Style 60VH High Pressure Style 64SA Style 60UA Style 60VJ T1- Female NPSM BENT TUBE ADAPTERS Style 60SB T1- Male ORB Style 60UB T1- Adj. Male ORB Restricted Orifice Style 61SA Style 60SG Style 60UC Restricted Orifice Style 61UA High Pressure Style 64SG Style 60UD T1- Adj. Male ORB Style 60TA Style 60UG Style 60TB T1- Adj. Male ORB Style 60VC PARKER HANNIFIN Style 63TA Style 63UA Style 63UC Style 63SB Style 63UB Style 63TB Style 63SE T2-37 o Female swivel T2-37 o Female swivel T2-37 o Female swivel T2- Code 61 Flange T2- Code 61 Flange T2- Code 61 Flange T2- Code 61 Flange Style 63UE Style 63TE Style 63SF Style 63UF Style 63TF T2- Code 61 Flange T2- Code 61 Flange T2- Code 62 Flange T2- Code 62 Flange T2- Code 62 Flange
STEEL PIPE ADAPTERS PARKER HANNIFIN Style 24SA Style 25TG Style 25VT Style 830-TT T1- ORFS Cap Nut Style 24SB Style 25UA Style 25WJ Style 832-TT Style 24SG Style 25UG Titan Style 834-TT Style 24SJ Style 25UJ Style 836-TT T1- Silver Braze Ring Style 24SR Style 25VC Style 839-TT Plug Style 25SP Style 25VJ Style 24ST Style 25VK O RING FACE SEAL Style 840PF-TT T1- Flangeback Sleeve (Use with 841-TT) Style 840-TT T1- Braze Sleeve (Use with 841-TT) Style 841-TT Style 842-TT Style 844-TT Style 845-TT Style 845-TTO Style 846-TT Style 848-TT T1- Tube Nut Style 848-TTO Style 848L-TTO Style 849-TT Style 849L-TT Style 849-TTO Style 849L-TTO Style 849LL-TTO T2- Male ORB T2- Male ORB
O-RING FACE SEAL Titan Style 851-TTO Style 870-TT T2- Male ORFS Style 882-TT T1- Female ORFS Style 852-TT Style 871-TT T2- Female ORFS Style 883-TT T1- Female ORFS T2- Male ORFS Style 854-TT T1- Female ORFS Style 872-TT T2- Female ORFS METRIC STOCK PORT END Style 830-TM T1- ORFS Cap Nut Style 841-TM T1- Tube Nut Style 889-TT T2- Female ORFS Style 844-TM Style 854BH-TT T2- Male ORFS Style 878-TTO T1- Female ORFS Style 845-TTM T2- Metric Adj. Male ORB Style 854-TTO Style 879-TT T2- Female ORFS Titan II Style 848-TTM T1- Metric Male ORB T2- Male ORFS Style 855-TT Style 881-TT T1- Female ORFS Style 849-TTM T2- Metric Adj. Male ORB Style 855BH-TT T2- Male ORFS Style 881-TTO T1- Female ORFS T2- Male O-RB Style 851-TTM T2- Metric Adj. Male ORB PARKER HANNIFIN Style 852-TM Style 853-TTM Style 854-TTM Style 871-TTM Style 872-TM Style 879-TM Style 721-TTM T1- Metric Male ORB T2- Metric Adj. Male ORB T2- Female ORFS T2- Female ORFS T2- Female ORFS T1- Metric ORB METRIC ADAPTERS Style 901-FS T2- Metric DIN 7611 Style 902-FS T2- Metric Swivel DIN 3861SB Style 903-FS T2- Male BSP