UR Ultra Rapid Fuses For Semiconductor Protection Over many decades SIBA has developed a very comprehensive product line of Ultra Rapid fuses that has achieved worldwide acceptance. SIBA's worldwide distribution network provides technical support and with our R&D engineering department provides design partnerships for the development of new products with the most modern equipment for the design, manufacturing and testing to minimize development time. 175
UR Ultra Rapid Fuses Technical Guide for Fuse Utilization URT Page 177 Size 000 and 00 DIN80 Fuses URB 190 600V AC - 1000V AC ND and D Type Fuses URD 204 440V AC - 500V AC DC Fuses URDC 210 440V DC - 5000V DC British Standard Fuses URE 290 240V AC - 700V AC Rectifier and Line Protection Combination - "Two in One" Fuse URL 316 690V AC - 700V AC German Style Knife Blade Fuses URM 352 500V AC - 2000V AC Square Body Fuses URS 388 690V AC - 2500V AC Cylindrical Fuses URZ 450 250V AC - 1000V AC New! - Solar Photovoltaic Fuses URDC-PV 499 250V DC - 1500V DC 176
URT Ultra-Rapid Fuse Links for the Protection of Semiconductor Rectifiers 1.General The design of rectifier equipment requires specific provisions in the switchgear for the protection of power semiconductor components have low thermal capacity so that the requirements for the planned protective device exceed those of standard devices. Both the rated current and voltage as the criteria for the fusing selection are no longer sufficient and the following has to be considered: High speed of response in the overload range Operating integrals adjusted to the limited load integrals of the semiconductor cell Low switching voltages during breaking process Low temperature rise and power loss of the protective device under operating conditions Further important design aspects are the price of the protection device in relation to the total the equipment, as well as down time after a fault. SIBA ultra-rapid fuse links meet these requirements and efficient protection is provided. Features include: Extremely fast time/current behavior and low operating integral values Low temperature rise at the insulating body due to excellent thermal conductivity of the special ceramic. Low power loss under rated conditions. Free of ageing, due to the use of pure silver elements. Low switching arc voltage due to special element design. The technical information presented here is intended to be used as a basis for design, and includes all the basics necessary for the selection of devices offering the maximum protection for rectifiers. Firstly, the fuse specific data is explained in detail, rendering a basis for the following chapters which examine the breaking process. SIBA data sheets include characteristic curves, these are described in this documentation and examples given. The most commonly used rectifier circuits are shown in tabular form, properties of parallel and series connection of fuse links are given, and possible faults in circuits are treated. Thermal influences, alternating load operation and current shock loads are considered and compensated by conversion coefficients described in the following chapter. Finally, the last chapter shows, the criteria for calculating the optimum fuse link, and includes a flow diagram for an easy overview. 2. Characteristic Values of Fuse Links Rated Voltage - U N The rated voltage of a semiconductor fuse link is the RMS value of a sinusoidal AC voltage. All test conditions and the operating voltage limit are stipulated on that basis. The fuse link rated voltage has to be determined in order to be higher than the voltage causing the short circuit current. Rated Current - I N The rated current of a fuse link is the RMS value of a sinusoidal AC current at a frequency range of 45Hz to 62 Hz. It is the current with which the fuse link can be loaded continuously under determined conditions without changing its characteristics. 177
URT These conditions, provided by the standards, are: Ambient temperature (20 ± 5) C No external cooling Connecting cross section specified Fuse links are mounted in open test rigs while testing In practice, however, conditions are usually more diverse, and so additional calculations are necessary, which may result in decreasing the fuse links rated current. Power Dissipation - P V The power dissipation (or power loss) of fuse links is calculated by multiplying the rated current by the value of the voltage drop measured over the fuse link after loading with rated current up to a final the steady temperature under the conditions described above. Initial Short Circuit Alternating Current - I K" The effective value of the short circuit current at the beginning of the short circuit which would flow if the short circuit would occur directly behind the fuse link and if the fuse link would be replaced by a member of negligible impedance. Cut-Off Current - I D Peak of the short circuit current limited by the fuse. Highest momentary value of the current during the breaking process. Melting Time - t S Period between the start of the fault current and the melting of all elements. Arcing Time or Extinguishing Time - t L Period between the melting of the elements and the definite arc extinction. Operating Time - t A Total of the melting time t s and the arcing time t L. Switching Voltage or Arcing Voltage - U L Maximum value (peak value) of the voltage occurring at the term Melting Integral - I²t s Integral of the current square above the melting time. The value of the melting integral depends, amongst other things, on the construction of the fuse elements and the ambient temperature. dt I² t S = i² dt I 2 t s = I2 0 ts 178
URT Arc Integral - I²t L Integral of the current square above the arcing time. The value of the arc integral depends on the system voltage, the short circuit current or respectively current rise rate di/dt and the short circuit impedances R K and Z K. I² t L = i²dt I 2 t L = I2 ts ta Operating integral I²t A Total of the melting integral and the arc integral 3. The Breaking Process I² It 2 t A I 2 s + I 2 A = I² t S + ti² L t L 3.1 Breaking At Low and Medium Overload The load current flowing through a fuse link results in a voltage drop according to its resistance. Multiplication of the voltage drop with the load current designates a power loss, which is in the form of heat, is transferred to the environment via the terminals and the cables. At load currents above the rated fuse current, temperatures rise at the melting element notches inside the fuse link, so that in time these notches will melt. At these interrupting spots individual arcs occur, allowing the current to flow until the arc is extinguished. In the range of low and medium fault currents where the melting time has the duration of some current half wave, an arcing time of less than 5 ms can be regarded as negligible. This melting time then to the total breaking time. 3.2 Breaking At Short Circuit Currents In the short circuit range the melting element notches melt and evaporate in nearly one millisecond due to the steep current rise. At the melted notches, arcs occur which remain active as long as a sufficient number of insulating bridges are created by the surrounding quenching medium. The arising arc voltage exceeds the value of the operating voltage however it is limited by the specific SIBA design of the melting element. The arcing time in this case can no be longer regarded as negligible, because the arcing time is than the melting time. Addition of melting time (t S ) and arcing time (t i ) results in the operating time (t A ). For protection of semiconductor components in this range the operating integral I 2 t A is decisive, that means the total of the melting integral and arc integral, I 2 t A must always be smaller than the limited load integral of the semiconductor element to be protected. 3.3 Voltage and Current Development At Short Circuit Currents Figure 3.3 shows the temporal development of a short circuit current at alternating and direct voltage. The voltage existing across the fuse link during the breaking process is indicated simultaneously with the current with regard to that time. The time t 0 is the beginning of the short circuit; a peak value as it is the maximum asymmetric short circuit current can be reached. After the time ts has passed, the fuse link limits the current to the value of the cut-off current I D. A breaking arc occurs, but is decreased rapidly during time t L by the influence of quartz sand. The breaking process is finished after the time t A. 179
URT Fig. 3.3 Short circuit interruption at AC and DC currents 4. Graphic Presentation of the Fuse Link Operating Behavior 4.1 Time-Current Curves(TCC) Time-current curves demonstrate the dependence of the melting time on the fault current though the fuse link. The curves are a result of testing the melting time of non preloaded fuse links. The individual measured points are the arithmetic average value of at least three melting tests. If not otherwise noted,the tolerance of the time-current curve is ± 7 % in direction of the current. The limited operating ranges of ultra-rapid fuse links are indicated by the dotted part of the curve. This is the range of load currents where the melting elements react, but the fuse links may not interrupt due to thermal reasons. From these broken line curves it is obvious that this group belongs to back up fuses of operating class ar. Due to a self heating of semiconductor fuses at currents with melting times higher than 30 seconds, these overcurrents have to be limited with preconnected protection devices. A parallel curve with a value 80 % of the dashed ones indicates the maximum acceptable interrupting current and response time of each protecting device. This is to limit the contact and insulation temperature of the cable and the fuse holder, if fitted. 4.2 Cut-Off Current Diagram The current limitation diagram is provided to determine the cut-off current I D and the maximum asymmetric short circuit current I s, depending on the initial short circuit alternating current I K" to be expected. The diagonal line in the diagram represents the possible peak value of the short circuit current to be expected according to the simple relation: Is=I K" * 2, should a fuse link not be used. Of more importance for the user are the individual current limitation curves of the fuse link rated current. The value of the cut-off current in respect of the dynamic load in cases of short circuit is an important figure for the design of the device to be protected. 4.4 Switching Voltage Diagram Usually, the switching voltage is given at the fuse link rated voltage. For operation of ultra- rapid links with a load voltage smaller than the rated voltage, reduction of the switching voltage has to be fuse calculated. The diagram allows 180
URT the determination of the arc voltage U L in relation to the loading voltage U B. 4.5 I²t Values At high failure currents with melting times smaller than 5ms, an indication of the actual melting or switching times is longer possible due to the adiabatic process inside the fuse link. In this case, the melting integral has to be used for the melting process, and the value of the operating integral stands for the sum of the extinguishing and melting process. Here the impulse is defined I 2 t A, which is a constant for each rating. I 2 t A is composed of two parts; I 2 t s, the current impulse needed to melt all of the element's notches, notches, and I 2 t L, the impulse current of the arc during the extinguishing process of the fuse. Note that this current impulse I 2 t A also passes through the semiconductor to be protected. In order to protect the semiconductor component from catastrophic failure, the rupture I 2 t of the device must be obtained. I2t A than the I 2 t rupture value of the semiconductor component. As the energy impulse for melting is always constant for a certain rated current, this value is shown in the respective diagram as a statistic value. The correction curve diagram allows calculation of the operating integral at different operating voltages by giving a coefficient which is then multiplied by the operating integral given in the datasheet. 4.6 Operating Classes The respective range of currents, over which the fuse link can operate, determines the operating classes. ar - Back-Up Semiconductor Protection Partial range breaking capacity fuse links, which are able to carry continuous currents from the lowest up to their rated current. The fuses are able to interrupt currents above a certain multiple of their rated current and up to the breaking current. gr - Full Range Semiconductor Protection Full range breaking capacity fuse links, which are able to carry continuous currents from the lowest up to their rated currents, and are able to interrupt currents from the minimum melting current up to the rated breaking current. grl(gs) - Fuses For the Simultaneous Protection of the Semiconductors and Cables Full range SIBA fuse links with the same behavior as the above mentioned fuses of class gr. In addition, this fuse is suitable for the overload protection of cables. Instead of using a semiconductor protection fuse and a cable protection fuse, it may possible to use only one fuse of class grl hence saving on space and cost.(see a special report at our website) 5. Applications 5.1 SIBA U ltra-r apid Fuse Links In Rectifier Circuits The most common rectifier circuits are shown in table 5.1. The operating currents and operating voltages are coordinated with the individual circuits. Given are the coefficients for: Operating current of a phase fuse link as a multiple of the D.C. load current Operating current of a fuse link placed at the inverter branch as a multiple of the D.C. load current Maximum value of the rectifier voltage as a multiple of the transformer voltage Operating voltage of the fuse link as a multiple of the floating voltage 181
URT Circuit Type Code Phase Fusing Location Branch I RMS /I DC I RMS /I DC U AC /U 2 U fuse /U DC Single Phase 1.00 0.50 0.41 Single Phase Half Wave M1 1.57 1.57 1.41 2.22 Single Phase Full Wave M2 0.71 0.71 2.83 2.22 Single Phase B2 1.00 0.71 1.83 1.11 Six Phase M6 0.41 0.41 2.50 1.48 Six Phase B6 0.82 0.58 2.50 0.74 Six Phase SD6 0.29 0.29 2.50 1.48 Twelve Phase SD12 0.14 0.14 2.50 1.48 Fig. 5.1 Cont. - Circuits for power semiconductors and appropriate calculation coefficients 182
URT 5.2 Series or Parallel Connection of SIBA Ultra-R apid Fuse Links 5.2.1 Series Connection of Fuse Links Rectifier circuits that operate at voltage levels exceeding, the rating of a single fuse, may have the possibility of being protected by the use of two standard voltage rated fuses that are series connected (see Figure 5.2a). This kind of protection requires that the series connected fuses are of the same voltage rating, and that the sum of the fuses, voltage ratings exceeds the rectifier s operating voltage. Fuses of the same current rating utilized in series requires that the resistance tolerance be very small. Usually this can be achieved by the use of fuses from the same production batch. In addition, it has to be ensured that the size of the available short circuit current exceeds the fuse s rated current by a minimum of a factor of 10. 5.2.2 Parallel Connection of Fuse Links To protect circuits with loading currents higher than the current range of the available fuse ratings, two or more fuse links can be used at parallel connection (see Fig. 5.2.b). This application requires an optimal equal current load for each fuse link group with identical rated current. In addition, the inner resistances of these fuse links have to be in close tolerance. It is also important to use fuses of the same production batch. a) b) c) Fig. 5.2 Series and Parallel Connection of Fuse Links 5.2.3 Semiconductors in Parallel Operation Parallel connection of semiconductors also requires equal path currents. In general, it is sufficient to make sure that none of the semiconductors have to take a too high let-through current. Some applications, especially when several semiconductors are connected in parallel, require measures against too high closing losses of the fastest switching thyristor. The series connection of resistances in the individual branches would be such a measure. Fuse links connected in series to thyristors can take over the function of resistances. Here it is certainly necessary that all fuse links have equal resistances. In such circuits (see Fig. 5.2.c) the same current flows through the fuse link and the semiconductor cell to be protected. The load current splits synchronously, half on each side. The integral values of the fuse link and the semiconductor cell are to be assigned directly to each other. 6. Consideration of Practical Behavior In Inverter Circuits SIBA ultra-rapid fuse links are developed and rated according to standardized conditions. In practice fuse links are often used for semiconductor protection under conditions differing from those stipulated and it may happen that the full rated current cannot be carried or that a higher load of the fuse link is possible. The conversion coefficients in the data sheets consider such deviating conditions. Therefore, it is necessary to consider the particular behavior of the fuse surrounding area, such as cooling, heat sources etc., and also to recognize cyclic load or peak currents. 6.1 Thermal Influences A higher ambient temperature may reduce the current rating of the fuse link. As the different types of fuse links react differently to high temperatures, each type is given a constant, "a". To consider a surrounding temperature above 183
URT 30 C it is necessary to calculate, on the basis of "a", the coefficient "A1": A1 = SQRT a - T (ambient-c) a - 30 Coefficient "B1" considers an additional cooling by external ventilation. If the air speed v L measured at the side of the fuse-body at a distance of 1 to 2 cm) is about 5 m/s then B1 has a value of 1.25. If the air speed is different to 5 m/s one has to calculate: B1 = 1 + 0.05 * v L With A1 and B1 it is possible to up rate the load current I L to the smallest fuse rated current I min : I min = I L / (A1 * B1) In case of thermal influences, the chosen fuse rated current must be equal to or higher than the calculated smallest fuse rated current Imin. 6.2 Cyclic Load Operation Cyclic load operation, with regular or irregular variation of load currents, has considerable influence on the fuse link s lifetime. (See the technical essay at our web-side) This kind of operation, with load periods of 0.1 second up to one hour, requires a complex calculation. For defined part times, coefficient A2 for regular and irregular load periods and B2 for each current step at the load periods have to be differentiated. Fig. 6.2 Regular and Irregular Load In the case of a cyclic load, the RMS-value of the load current obtained over the period Ts has to be divided by coefficient A2 to get the smallest fuse rated current. I min = I RMS / A2 184
URT While coefficient A2 influences the rated current, coefficient B2 has to be considered in coherence with the fuse curve. Here B2 indicates the distance between the value of the current step and the smallest value of the time-current curve obtained over the part periods tn. I TCC >= I n / B2 6.3 Extraordinary Overloads Should occasional short time overloads without interruption by the fuse link be considered; or if at load currents of a certain value a short circuit breaker, and not a fuse link positioned behind the circuit breaker, should cause the interruption of the circuit, coefficient Cf3 has to be used. Similar to the application of coefficient B2, Cf3 also indicates the difference between the value of the current step and the smallest value of the time/current-curve obtained over the part periods tn. I TCC >= I n / Cf3 Fig. 6.3 Extraordinary Overload 6.4 Application In sum, to find the appropriate rated current of the fuse link one first has to calculate the smallest possible rated current by I rated >= I Load / (A1 * B1 * A2) Then one needs to compare the single load current and the fuse curve I TCC of I rated >= I n / (B2) or/and I TCC of I rated >= I n / (Cf3) 185
URT 7. Optimal Protection For Rectifier Equipment The criteria for selection of the fuse link providing optimal protection of your rectifier are itemized below. To guarantee trouble free operation all the given points have to be considered. 7.1 Selection Criteria I B I rated The fuse link load current I B has to be smaller than or equal to the fuse link rated current I rated. All influencing components (alternating load, impulse load, thermal influences) have to be considered. U B U rated The operating voltage U B calculated or determined from Figure 5.1 has to be smaller than or equal to the fuse link rated voltage U rated. If in doubt, the rated voltage of the component to be protected can be used as a basis. It has to be considered that during faults and regenerative loads the voltage to be interrupted at the fuse link may reach 1.8 times the supply voltage. I²t A < I²t semi The breaking integral value of the fuse link I²t A has to be smaller than the limited load integral of the semiconductor cell. If necessary, the limited load integral can be calculated by indication of the peak current limit value ITSM of the semiconductor. U L < U RRM/DRM The arc or switching voltage U L shall not exceed the value of the positive or negative blocking voltage of the semi- conductor cell. I K" < I kmax It should be checked whether the prospective short circuit current I K" resulting from the reactance of the is installation smaller than the tested maximum breaking capacity of the fuse link. 7.2 Selection Procedure The flow chart gives guidelines on how to select fuse links considering different conditions and influences. 7.3 Protection Analysis or Synthesis Available at SIBA A straightforward solution to designing the appropriate protection for your equipment is offered by the engineering staff in our company. Based on many years of research into semiconductor components, electrical tests and experience in rating fuse links in rectifier circuits, SIBA is in the position to elaborate maximum possible safety. Supported by a fuse calculating program, our engineers will consider your given maximum conditions and accordingly recommend the proper ratings and types for suitable protection. 7.4 Special Designs There may be applications that do not allow the use of standardized fuse links or fuse links of sizes the offered in the catalogues. Our possibilities to meet your specifications include, for example, the specific design of contacts; decrease or increase of rated current offered in the data sheets, or specific characteristic of time-current behavior of a fuse link different from our data sheets. Any variation is of course only practicable within physical limits. In any case, our engineers are of prepared to discuss and analyze your technical problems. 186
URT Calculate Fuse Rating Calculate current through the fuse taking into account alternating and surge loads Determine the rated voltage of the fuse link U N > U B Enter Data of the semiconductors U DRM, U RRM, I TSM Yes Determine type of fuse Sizes, contacts, approvals Installation of the fuse link under standard conditions Select different type of fuse No Yes Is it possible? Consider influencing factors, temperature, cooling, cable size, encapsulation Apply data sheet coefficients to fuse Calculate minimum current the fuse link can carry continuously Improve operating conditions cooling, terminal cross section Select rated current according series of standards, I N > I B Burst Integral > Operating integral Off state voltage > Switching voltage Peak current > Cut-off current Optimum component protection Select Article No. from appropriate datasheet Fig 7.2 Flow chart for the selection of the semiconductor fuse link 187
URT U ltra-r apid Fuse Links for the protection of semiconductor rectifiers Annex A: Example calculations Thermal influences A semiconductor cell has to be protected by a low voltage fuse link. The fuses are installed inside a temperature controlled cabinet with an air speed of about v L = 4 m/s, while the temperature in the cabinet is 80 C. The fuses carry a load current of I L = 200A. Fuses of size 000 with bolted connections was preferred. According to the data sheets for these fuses the thermal constant "a" is given as 130. A1 = SQRT a - T (ambient-c) a - 30 = SQRT 130-80 130-30 = 0.71 B1 = 1 + 0.05 * V L = 1 + 0.05 * 4 = 1.2 I min = I Load / ( A1 * B1 ) = 200 / ( 0.71 * 1.2 ) = 235A The rated current of the fuse link should be 235A or higher. Typically, one would take a rating of 250A. Cyclic Load Operation The designer calculates a regular load period through the thyristor in a given circuit. Load times and currents are shown in the load diagram. The fuse links will be connected in series with the semiconductor. As the preferred fuses of type "SQB", the coefficients for cyclic load operation "A2" and "B2" have to be taken from the fuse data sheet. I 1 = 260A I 2 = 340A I 3 = 0A t 1 = 1020 t 2 = 300 t 3 = 420 Calculation of the load current R.M.S. value: From SQB-dat A2 = 0 B2 = 0 I RMS = SQRT I 1 2 *t 1 + I 2 2 *t 2 + I 3 2 *t 3 t 1 + t 2 + t 3 = SQRT 260 2 *1020 + 340 2 *300 + 0*420 1020 + 300 + 420 = 244A Calculation of the smallest fuse rated current I min = I RMS / A2 = 244A / 0.75 = 325A The rated current of the fuse link should be 325A or higher. Typically, one would take a rating of 355A. Review of the load steps and comparison with the time-current-curve of the rating 355A: I TCC >= I n / B2 188
URT Checking the time-current-curve of the rating 355A at 1020s: 560A 650A >= 340A / 0.6 = 567A 560 A >= 260A / 0.6 = 433A Checking the time-current-curve of the rating 355A at 300s: 650A Based on the above calculation, a fuse rating of 355A will carry the load represented in the diagram continuously. As a next step, one should observe the I²t-limits of the semiconductor and compare them with the fuse integral. In this case it may be necessary to reduce the fuse rated current. Extraordinary Overloads An impulse load on the D.C. side of a converter causes a current through the fuse link as shown in the load diagram. A load-break-switch interrupts such a load in a period of <200ms. One should determine whether the fuse link can carry the current for the duration of the overload without interruption. I 1 max = 200 t 1 = 14m ( I 2 RMS about 1 I s RMS = 90 t 2 = 200m SQB Fuse Link Rated current Cf3 = 0. Review of the load first wave and the load-rms value, and comparison with the time-current-curve(tcc) of the rating of 355A: I TCC >= I n / Cf3 Checking the time-current-curve of the rating 355A at 14ms: 1900A 1900A >= 1300A / 0.8 = 1625 A Checking the time-current-curve of the rating 355A at 200ms: 1600A 1600A >= 900A / 0.8 = 1125 A Based on the above calculation, a fuse rating of 355 A will carry the load according to the diagram continuously. 189
URB URB Fuses for Semiconductor Protection - European Standard Class: ar Voltage ratings: 660V AC to 1000V AC Current ratings: 16 A to 400 A Standards: UL 248-13 IEC 60269-1 & 4 DIN VDE 0636-40 DIN 43653 Approvals: E180276 Features and Benefits Extremely High interrupting ratings 100kA - 300kA Protection of Power Semiconductor according to IEC 60269-1 & 4 Complies with DIN 43653 for fuse sizes 000 and 00 Class; ar, 16A - 400A according to IEC 60269-4 and DIN VDE 0636-40 Fuse accessories available - Fuse Bases and Microswitches 190
URB Fuses for Applications Fuses for Semiconductor Protection - European Standard Article Description 690V AC -IEC / 700V AC -UL NH000 DIN80 Selection Guide Technical Data 2028221 80mm mounting centers No blown fuse indication 2028220 80mm mounting centers With blown fuse indication 192 192-193 2055820 80mm mounting centers With fitting for microswitch NH00 DIN80 2018921 2018920 2041220 2028241 2028204 2055804 2018941 2018904 2041204 2056021 2056020 2056220 80mm mounting centers 80mm mounting centers 80mm mounting centers 80mm mounting centers 80mm mounting centers 80mm mounting centers 80mm mounting centers 80mm mounting centers 80mm mounting centers 80mm mounting centers 80mm mounting centers 80mm mounting centers No blown fuse indication With blown fuse indication With fitting for microswitch 660V AC -IEC NH000 DIN80 No blown fuse indication With blown fuse indication With fitting for microswitch NH00 DIN80 No blown fuse indication With blown fuse indication With fitting for microswitch 1000V AC -IEC No blown fuse indication With blown fuse indication With fitting for microswitch Accessories 194 200 194-195 196 196-197 198 198-199 200-201 2800201 2800202 2800203 2800204 2118901 2118908 2118911 Standard Level Low Level 80mm mounting centers GL-Microswitch Single Change Over Circuit Fuse Base 202 203 191
URB URB Rated Voltage Rated Breaking Test [U n ] Capacity Voltage 690V AC - IEC 200kA 660V AC E180276 700V AC - UL Size NH000 - DIN 80 Class ar UL 248-13 IEC 60269-4 VDE 0636 Part 40 Rated Without Indicator With With Top Indicator Power Pre-arcing Total Current Top Indicator and Fitting for Loss I 2 t I 2 t * I n UL UL Microswitch UL @ 660V AC [A] Article Number rec Article Number rec Article Number rec [W] [A 2 s] [A 2 s] 32 2028221.32 2028220.32 2055820.32 8 52 290 35 2028221.35 2028220.35 2055820.35 9 66 360 40 2028221.40 2028220.40 2055820.40 10 90 500 50 2028221.50 2028220.50 2055820.50 12 140 770 63 2028221.63 2028220.63 2055820.63 14 250 1 400 80 2028221.80 2028220.80 2055820.80 18 470 2 600 100 2028221.100 2028220.100 2055820.100 22 730 4 000 125 2028221.125 2028220.125 2055820.125 26 1 300 7 200 160 2028221.160 2028220.160 2055820.160 32 2 800 15 400 180 2028221.180 2028220.180 2055820.180 35 3 700 20 400 200 2028221.200 2028220.200 2055820.200 39 4 500 25 000 250 2028221.250 2028220.250 2055820.250 47 8 000 44 000 315 2028221.315 2028220.315 2055820.315 58 14 000 77 000 Weight [kg /1] 0.18 Units per Package 6 0.17 Dimensions [in /mm] A 2.17 / 55 B 0.79 / 20 C 0.33 / 8.5 D 0.80 / 20.4 E 3.07 / 78 F 0.08 / 2.0 G 2.09 / 53.2 I 1.50 / 38 3.94 / 100 L max 2028221 / 2028220 Accessories 2055820 Fuse Bases UL File E186970 2118901 2118908 2118911 Page 203 Microswitch (Red Hammer) UL File E309038 2800201 - Standard 2800203 - Low Level Page 202 192
URB URB Rated Voltage Rated Breaking Test Class [U n ] Capacity Voltage ar 690V AC - IEC 200kA 660V AC E180276 700V AC - UL Size NH000 - DIN 80 UL 248-13 IEC 60269-4 VDE 0636 Part 40 Coefficients for Heavy Duty Applications a A2 B1 B2 Cf3 130 0.6 1.25 0.6 0.8 Cut-Off current Characteristics Time-Current Characteristics Cut-Off Current - Peak [ka] Virtual Pre-arcing time - [s] Prospective Short Circuit Current [ka] (Symmetrical r.m.s.) R.M.S. Prospective Current [A] N28220-60_1 Arc voltage Reduction factor Reduction factor for diagram for I 2 t total power loss 1500 1.2 1.0 UL V AC 1300 1100 1.0 K B 0.8 0.8 K w 0.6 900 0,6 0.4 700 0.4 0.2 500 200 400 600 800 UB V AC 0.2 200 400 600 800 UB V AC 0 0 0.2 0.4 0.6 0.8 1.0 IB I N 193
URB URB Rated Voltage [U n ] 690V AC - IEC E180276 700V AC - UL Size NH00 - DIN 80 Rated Breaking Test Capacity Voltage 200kA 700V AC Class ar UL 248-13 IEC 60269-4 VDE 0636 Part 40 Rated Without Indicator With With Top Indicator Power Pre-arcing Total Current Top Indicator and Fitting for Loss I 2 t I 2 t * I n UL UL Microswitch UL @ 660V AC [A] Article Number rec Article Number rec Article Number rec [W] [A 2 s] [A 2 s] 35 2018921.35 2018920.35 2041220.35 8 66 360 40 2018921.40 2018920.40 2041220.40 10 90 500 50 2018921.50 2018920.50 2041220.50 12 140 770 63 2018921.63 2018920.63 2041220.63 14 250 1 400 80 2018921.80 2018920.80 2041220.80 17 470 2 600 100 2018921.100 2018920.100 2041220.100 21 730 4 000 125 2018921.125 2018920.125 2041220.125 25 1 300 7 200 160 2018921.160 2018920.160 2041220.160 31 2 800 15 400 180 2018921.180 2018920.180 2041220.180 34 4 200 23 100 200 2018921.200 2018920.200 2041220.200 37 5 000 27 500 250 2018921.250 2018920.250 2041220.250 44 8 500 46 800 315 2018921.315 2018920.315 2041220.315 53 15,600 86 000 350 2018921.350 2018920.350 2041220.350 57 20 000 110 000 400 2018921.400 2018920.400 2041220.400 68 28 400 156 000 Weight [kg /1] 0.19 0.21 Units per Package 6 Dimensions [in /mm] A 2.20 / 56 B 1.13 / 28.8 C 0.40 / 10.3 D 1.16 / 29.5 E 3.07 / 78 F 0.98 / 2.5 G 2.48 / 63 I 1.85 / 47 L max 4.13 / 105 2018921 / 2018920 2041220.200 2041220 Accessories Fuse Bases Microswitch (Red Hammer) UL File E186970 Page UL File E309038 2118901 2800201 - Standard 2118908 203 2800203 - Low Level 2118911 Page 202 194
URB URB Rated Voltage Rated Breaking Test [U n ] Capacity Voltage 690V AC - IEC 200kA 700V AC E180276 700V AC - UL Size NH00 - DIN 80 Coefficients for Heavy Duty Applications a A2 B1 B2 Cf3 130 0.6 1.25 0.6 0.8 Class ar UL 248-13 IEC 60269-4 VDE 0636 Part 40 10 3 ka Cut-Off current Characteristics N18920-40_1 Time-Current Characteristics Cut-Off Current - Peak [ka] 10 2 10 1 10 0 8 6 4 350 A 400 A 315 A 250 A 180 A 200 A 160 A 125 A 100 A 80 A 63 A 50 A 35 A 40 A Virtual Pre-arcing time - [s] 3 2 10-1 10 1 10 0 10 2 ka 10 3 2 3 4 6 8 Prospective Short Circuit Current [ka] (Symmetrical r.m.s.) R.M.S. Prospective Current [A] N18920-60_1 Arc voltage Reduction factor Reduction factor for diagram for I 2 t total power loss 1500 1.2 1.0 UL VAC 1300 1100 1.0 K B 0.8 0.8 K w 0.6 900 0,6 0.4 700 0.4 0.2 500 200 400 600 800 UB V AC 0.2 200 400 600 800 UB V AC 0 0 0.2 0.4 0.6 0.8 1.0 IB I N 195
URB URB Rated Voltage [U n ] 660V AC - IEC Rated Breaking Test Capacity Voltage 100kA 660V AC Class gr100a ar125a IEC 60269-4 VDE 0636 Part 40 Size NH000 - DIN 80 Rated Current I n [A] 16 20 25 32 35 40 50 63 80 100 125 160 Without Indicator With With Top Indicator Power Pre-arcing Total Top Indicator and Fitting for Loss I 2 t I 2 t * Microswitch @ 660V AC Article Number Article Number Article Number [W] [A 2 s] [A 2 s] 2028241.16 2028204.16 2055804.16 5 10 70 2028241.20 2028204.20 2055804.20 6 17 120 2028241.25 2028204.25 2055804.25 7 29 200 2028241.32 2028204.32 2055804.32 9 66 450 2028241.35 2028204.35 2055804.35 9 81 550 2028241.40 2028241.50 2028204.40 2028204.50 2055804.40 2055804.50 10 11 103 184 700 1 300 2028241.63 2028204.63 2055804.63 13 330 2 300 2028241.80 2028204.80 2055804.80 18 512 3 500 2028241.100 2028204.100 2055804.100 22 930 6 400 2028241.125 2028204.125 2055804.125 24 1 650 11 200 2028241.160 2028204.160 2055804.160 28 4 250 29 000 Weight [kg /1] 0.17 Units per Package 6 Dimensions [in /mm] 2.17 / 55 A B C D E F G I L max 0.79 / 20 0.33 / 8.5 0.80 / 20.4 3.07 / 78 0.08 / 2.0 2.09 / 53.2 1.50 / 38 3.94 / 100 2028241 / 2028204 Accessories 2055804 Fuse Bases UL File E186970 2118901 2118908 2118911 Page 203 Microswitch (Red Hammer) UL File E309038 2800201 - Standard 2800203 - Low Level Page 202 196
URB URB Rated Voltage [U n ] 660V AC - IEC Rated Breaking Test Capacity Voltage 100kA 660V AC Class gr100a ar125a IEC 60269-4 VDE 0636 Part 40 Size NH000 - DIN 80 Coefficients for Heavy Duty Applications a A2 B1 B2 Cf3 130 0.8 1.25 0.8 0.8 Cut-Off current Characteristics Time-Current Characteristics Cut-Off Current - Peak [ka] Virtual Pre-arcing time - [s] Prospective Short Circuit Current [ka] (Symmetrical r.m.s.) R.M.S. Prospective Current [A] N28204-60_1 Arc voltage Reduction factor Reduction factor for diagram for I 2 t total power loss 1500 1.2 1.0 UL VAC 1300 1100 1.0 K B 0.8 0.8 K w 0.6 900 0,6 0.4 700 0.4 0.2 500 200 400 600 800 U V B AC 0.2 200 400 600 800 U V B AC 0 0 0.2 0.4 0.6 0.8 1.0 I I B N 197
URB Rated Breaking Test Class URB Rated Voltage Rated Breaking Test Class [U n ] Capacity Voltage gr100a IEC 60269-4 660VAC - IEC 200kA 660V AC ar>100a VDE 0636 Part 40 Size NH00 - DIN 80 Rated Without Indicator With With Top Indicator Power Current Top Indicator and Fitting for Loss I n Microswitch [A] Article Number Article Number Article Number [W] 16 2018941.16 2018904.16 2041204.16 4.6 20 2018941.20 2018904.20 2041204.20 5.5 25 2018941.25 2018904.25 2041204.25 6.7 32 2018941.32 2018904.32 2041204.32 8.9 35 2018941.35 2018904.35 2041204.35 9.2 40 2018941.40 2018904.40 2041204.40 9.8 50 2018941.50 2018904.50 2041204.50 11 63 2018941.63 2018904.63 2041204.63 13 80 2018941.80 2018904.80 2041204.80 15 100 2018941.100 2018904.100 2041204.100 18 125 2018941.125 2018904.125 2041204.125 22 160 2018941.160 2018904.160 2041204.160 26 200 2018941.200 2018904.200 2041204.200 28 250 2018941.250 2018904.250 2041204.250 31 Weight [kg /1] 0.19 0.21 Units per Package 6 Pre-arcing I 2 t [A 2 s] 10 17 29 66 81 103 184 330 512 930 1 650 4 250 8 000 16 800 Total I 2 t * @ 660V AC [A 2 s] 70 120 200 450 550 700 1 300 2 300 3 500 6 400 11 200 29 000 54 400 114 300 Dimensions [in /mm] A 2.20 / 56 B 1.13 / 28.8 C 0.40 / 10.3 D 1.16 / 29.5 E 3.07 / 78 F 0.98 / 2.5 G 2.48 / 63 I 1.85 / 47 L max 4.13 / 105 2018941 / 2018904 2041204 Accessories Fuse Bases UL File E186970 2118901 2118908 2118911 Page 203 Microswitch (Red Hammer) UL File E309038 2800201 - Standard 2800203 - Low Level Page 202 198
URB URB Rated Voltage [U n ] 660VAC - IEC Rated Breaking Test Capacity Voltage 200kA 660V AC Class gr100a IEC 60269-4 ar>100a VDE 0636 Part 40 Size NH00 - DIN 80 Coefficients for Heavy Duty Applications a A2 B1 B2 Cf3 130 0.8 1.25 0.8 0.8 Cut-Off current Characteristics Time-Current Characteristics Cut-Off Current - Peak [ka] Virtual Pre-arcing time - [s] Prospective Short Circuit Current [ka] (Symmetrical r.m.s.) R.M.S. Prospective Current [A] N18904-60_1 Arc voltage Reduction factor Reduction factor for diagram for I 2 t total power loss 1500 1.2 1.0 UL VAC 1300 1100 1.0 K B 0.8 0.8 K w 0.6 900 0,6 0.4 700 0.4 0.2 500 200 400 600 800 U V B AC 0.2 200 400 600 800 U V B AC 0 0 0.2 0.4 0.6 0.8 1.0 I I B N 199
URB URB Rated Voltage Rated Breaking Test Class [U n ] Capacity Voltage ar 1000V AC 100kA 1000V AC 30kA 750V DC (L/R=4ms) Size NH00 - DIN 80 IEC 60269-4 VDE 0636 Part 40 Rated Without Indicator With With Top Indicator Power Pre-arcing Total Current Top Indicator and Fitting for Loss I 2 t I 2 t * I n Microswitch @ 1000V AC [A] Article Number Article Number Article Number [W] [A 2 s] [A 2 s] 32 2056021.32 2056020.32 2056220.32 14 32 220 40 2056021.40 2056020.40 2056220.40 16 56 400 50 2056021.50 2056020.50 2056220.50 18 100 700 63 2056021.63 2056020.63 2056220.63 22 180 1 200 80 2056021.80 2056020.80 2056220.80 25 410 2 800 100 2056021.100 2056020.100 2056220.100 28 740 5 000 125 2056021.125 2056020.125 2056220.125 32 1 300 9 000 160 2056021.160 2056020.160 2056220.160 40 2 600 17 500 200 2056021.200 2056020.200 2056220.200 46 4 600 31 000 250 2056021.250 2056020.250 2056220.250 51 8 200 55 000 280* 2056021.280 * 2056020.280 * 2056220.280 * 55 10 600 70 500 315* 2056021.315 * 2056020.315 * 2056220.315 * 59 16 000 106 000 * Rated 900Vac Weight [kg /1] 0.19 0.21 Units per Package 6 Dimensions [in /mm] A 2.20 / 56 B 1.13 / 28.8 C 0.40 / 10.3 D 1.16 / 29.5 E 3.07 / 78 F 0.98 / 2.5 G 2.48 / 63 I 1.85 / 47 L max 4.13 / 105 2056021 / 2056020 2056220 Accessories Fuse Bases UL File E186970 2118901 2118908 2118911 Page 203 Microswitch (Red Hammer) UL File E309038 2800201 - Standard 2800203 - Low Level Page 202 200
URB URB Rated Voltage Rated Breaking Test Class [U n ] Capacity Voltage ar 1000V AC 100kA 1000V AC 30kA 750V DC (L/R=4ms) Size NH00 - DIN 80 IEC 60269-4 VDE 0636 Part 40 Coefficients for Heavy Duty Applications a A2 B1 B2 Cf3 130 0.6 1.25 0.6 0.8 Cut-Off current Characteristics Time-Current Characteristics Cut-Off Current - Peak [ka] Virtual Pre-arcing time - [s] Prospective Short Circuit Current [ka] (Symmetrical r.m.s.) R.M.S. Prospective Current [A] N56020-60_1 Arc voltage Reduction factor Reduction factor for diagram for I 2 t total power loss 2000 1.2 1.0 UL VAC 1800 1600 K B 1.0 0.8 K w 0.8 0.6 1400 0.6 0.4 1200 0.4 0.2 1000 500 700 900 1100 UB V 0.2 500 700 900 1100 UB V 0 0 0.2 0.4 0.6 0.8 1.0 IB I 201
URB URB Accessories Microswitches and Fuse Bases GL Microswitch Standard Level Insulating Change Interrupt Rating Voltage Over AC DC Article Number [V] Circuits [V] [A] [V] [A] 2800201 5(resistive) 33 3(resistive) 1 250 2800202 3(inductive) 26 3(inductive L/R =10ms) Low Level Interrupt Rating Minimum Maximum 2800203 5V AC 30V AC 1 1mA(resistive) 0.3A 2800204 5V DC 30V DC Weight [kg / 1] 0.02 Units per Package 10 2800201 / 2800203 (Black Hammer) 2800202 / 2800204 (Red Hammer) Fuse Base 2118908 202
URB URB Rated Voltage Rated Current Power Acceptance 1000VAC 400A 34W E186970 Size NH000/00 DIN 80 Accessories Fuse Bases 2118901 2118908 Dimensions [in / mm] 2118901 2118908 2118911 A 4.96 / 126 4.96 / 126 4.96 / 126 B 1.57 / 40 B 1 1.57 / 40 B 2 1.34 / 34 C 0.50 / 13 0.50 / 13 0.50 / 13 D 0.75 / 19 0.75 / 19 0.75 / 19 E 3.15 / 80 3.15 / 80 3.15 / 80 F 0.12 / 3 0.12 / 3 0.12 / 3 G 1.73 / 44 1.81 / 46 G 1 2.00 / 51 G 2 1.73 / 44 H 4.40 / 112 2.91 / 74 4.40 / 112 I 0.26 / 6.5 0.26 / 6.5 0.26 / 6.5 J 0.60 / 15.5 0.60 / 15.5 0.60 / 15.5 K 0.63 / 16 0.63 / 16 0.63 / 16 L max 5.75 / 146 5.75 / 146 L 1 5.75 / 146 L 2 6.50 / 165 M M8 M8 M8 N 0.98 / 25 0.98 / 25 0.98 / 25 Max M8 nut torque 12N m 8.8lb ft 106lb in Max base mounting torque 4N m 3lb ft 35lb in 2118911 203
URD URD Fuses for Semiconductor Protection - European Standard Class: Voltage ratings: Current ratings: Standards: gr / ar 440V AC to 500V AC 2A to 200A IEC 60269-4 DIN VDE 0636-40 DIN 49515 / 49360 DIN 43653 SIBA D-Fuse also known as Diazed and Neozed Features and Benefits Class gr for rated current to 100A Class ar for rated current above 100A Al fuses have blown fuse indication Protection of power semiconductors according to IEC 60269-4 Fuse bases and accessories available 204
URD Fuses for Applications Article Description Selection Guide Technical Data 500V AC 1000207 ND - E16 1000507 Dll - E27 1000707 Dlll - E33 With blown fuse indication 206 206-207 1000907 DlV - R1-1/4" 1001007 DV - R2" 440V AC 1002707 D01 - E14 1002807 D02 - E18 With blown fuse indication 208 208-209 1002907 D03 - M30x2 205
URD URD Size ND, Dll, Dlll, DlV & DV Rated Current [A] 2 4 6 10 16 20 25 30 35 50 63 ND Rated Voltage Rated Breaking Test [U n ] Capacity Voltage 500V AC 100kA 500V AC Article Number Article Number Article Number 1000207.2* 1000507.2* 1000207.4* 1000507.4* 1000207.6 1000507.6 1000207.10 1000507.10 1000207.16 1000507.16 1000207.20 1000507.20 1000207.25 1000507.25 1000207.30 1000507.30 1000707.35 1000707.50 1000707.63 Weight [kg / 1] 0.016 0.031 0.031 Units per Package 50 5 5 * No Indicator * No Indicator Dll Dlll Class gr Power Loss [W] 1.8 3.1 4 6 7 8 10 12 13 16 19 Pre-arc I 2 t [A 2 s] 1 4 6 13 26 45 75 125 IEC 60269-4 VDE 0636 Part 40 DIN 49365 Total Total I 2 t @ 500V AC [A 2 s] 1.5 6 8 17 2 8 11 25 40 70 55 I 2 t @ 230V DC [A 2 s] 100 170 115 185 205 290 330 425 430 670 750 1 260 1 160 1 850 Rated Current [A] 80 100 125 160 200 DlV DV Article Number Article Number 1000907.80 1000907.100 1001007.125 1001007.160 1001007.200 Weight [kg / 1] 0.116 0.116 Units per Package 5 5 ND 1000207 Dll 1000507 Dimensions [in / mm ] Dlll 1000707 DlV 1000907 Power Loss [W] 33 42 32 43 56 Pre-arc Total Total I 2 t I 2 t @ 230V DC I 2 t @ 500V AC [A 2 s] [A 2 s] [A 2 s] 800 1 500 2 300 1 400 3 400 6 800 2 700 6 500 13 000 4 500 11 200 23 100 10 000 19 000 35 000 DV 1001007 D L 0.50 / 12.5 0.87 / 22 1.06 / 27 1.97 / 50 1.97 / 50 1.97 / 50 1.30 / 33 1.97 / 50 1.80 / 46 1.97 / 50 206
2A 4A URD URD Rated Voltage Rated Breaking Test [U n ] 500V AC Capacity 100kA Voltage 500V AC Size ND, Dll, Dlll, DlV & DV Class gr IEC 60269-4 VDE 0636 Part 40 DIN 49365 10 2 Cut-Off current Characteristics Time-Current Characteristics 10 4 ka 10 3 Cutoff Current - Peak [ka] 1 10 0 10-1 10 8 6 200 A 125 A 160 A 80 A 50 A 63 A 30 A 35 A 20 A 25 A 16 A 4A 2A 100 A 10 A 6A Virtual Pre-arcing time - [s] s 10 2 10 1 10 0 6A 10 A 16 A 30 A 25 A 20 A 35 A 50 A 63 A 80 A 100A 125 A 160 A 200 A 4 3 2-2 -1 0 1 2 3 2 3 4 6 8 ka 10 10 10 10 10 10 Prospective Short Circuit Current [ka] (Symmetrical r.m.s.) 10-1 8 6 5 4 3 2 10-2 10 0 2 3 4 5 6 8 10 1 2 3 4 5 6 8 10 2 2 3 4 5 6 8 10 3 A 2 3 4 5 6 8 10 4 R.M.S. Prospective Current [A] 207
URD URD Rated Voltage Rated Breaking Test Class [U n ] Capacity Voltage gr 440V AC 100kA 500V AC Size D01, D02 & D03 Rated Power Pre-arc Total Total Current D01 D02 D03 Loss I 2 t I 2 t @ 230V DC I 2 t @ 400V AC [A] Article Number Article Number Article Number [W] [A 2 s] [A 2 s] [A 2 s] 2 2.5 1 1.5 3.5 6 1002707.6 3.3 4 6 10 10 1002707.10 4.3 10 15 25 16 1002707.16 5.9 25 40 65 20 1002807.20 5 40 60 100 25 1002807.25 6 65 100 170 35 1002807.35 8 140 240 400 50 1002807.50 11 420 900 1 500 63 1002807.63 15 640 1 450 2 400 80 1002907.80 18 860 2 000 3 300 100 1002907.100 22 1 400 3 400 5 600 Weight [kg per 1] 0.014 Units per Package 0.006 Units per Package 50 25 0.042 Units per Package 25 Dimensions [in / mm ] D01 D02 D03 1002707 1002807 1002907 IEC 60269-4 VDE 0636 Part 40 DIN 49522 D L 0.43 / 11 0.60 / 15.3 0.90 / 22.5 1.42 / 36 1.97 / 50 1.70 / 43 208
2A 4A URD URD Rated Voltage Rated Breaking Test Class [U n ] Capacity Voltage gr 440V AC 100kA 500V AC Size D01, D02 & D03 IEC 60269-4 VDE 0636 Part 40 DIN 49522 10 2 Cut-Off current Characteristics Time-Current Characteristics 10 4 ka 10 3 Cutoff Current - Peak [ka] 1 10 0 10-1 10 8 6 100 A 63 A 80 A 50 A 35 A 20 A 25 A 10 A 16 A 2A 6A Virtual Pre-arcing time - [s] s 10 2 10 1 10 0 6A 10 A 25 A 20 A 16 A 35 A 50 A 63 A 100 A 80 A 4 3 2-2 -1 0 1 2 3 10 10 10 10 10 10 2 3 4 6 8 ka Prospective Short Circuit Current [ka] (Symmetrical r.m.s.) 10-1 8 6 5 4 3 2 10-2 10 0 2 3 4 5 6 8 10 1 2 3 4 5 6 8 10 2 2 3 4 5 6 8 10 3 A 2 3 4 5 6 8 10 4 R.M.S. Prospective Current [A] 209
URDC Fuses for DC and Traction Applications Classes: Voltage ratings: Current ratings: ar / gr / grl(gs) 440V DC to 4200V DC 6A to 1000A Standards: UIC 550 IEC 60269-4 IEC 60077-5 VDE 0636-40 SIBA DC Fuses are available for clip-mounted and bolt design. The fuses are used for traction, battery and railway power circuit applications. Due to the variety of applications please contact SIBA fo information regarding use at different voltage ratings, class or L/R time constants Features and Benefits Designed for heavy duty applications Shock and vibration tested to 30 g Developed according to customers specifications Tested with different time constants Designed for long life under severe service conditions 210
URDC Fuses for DC and Traction Applications Article 5012434 5012634 5012934 5014034 5014234 5014534 5014634 5019006 5019106 5019206 5011806 5020106 5020206 2029221 2029220 2025920 2055604 5021506 5021606 5021706 9030020 9030021 9035020 9035021 9031020 9031021 9036020 9036021 63mm mounting centers 80mm mounting centers PCB mounting 80mm mounting centers 80mm mounting centers PCB mounting 50.6mm mounting centers Bladed 156mm mounting centers Threaded M10 Bladed 156mm mounting centers Threaded M8 Description 440V DC 14mmx51mm No blown fuse indication With 2.5N Striker No blown fuse indication 22mmx58mm No blown fuse indication With 2.5N Striker No blown fuse indication No blown fuse indication 660V DC / 440V DC 27mmx60mm No blown fuse indication With 2.5N Striker No blown fuse indication 700V DC 14mmx51mm No blown fuse indication No blown fuse indication 000 DIN 80 No blown fuse indication With blown fuse indication With fitting for microswitch 750V DC NH1 With fitting for microswitch 1000V DC 10mmx38mm No blown fuse indication SQB -DC90 No blown fuse indication With fitting for microswitch No blown fuse indication With fitting for microswitch SQB -DC91 No blown fuse indication With fitting for microswitch No blown fuse indication With fitting for microswitch Selection Guide Technical Data 216 216-217 218 218-219 220 220-221 222 222-223 224 224-225 226 226-227 228 228-229 230 230-231 232 232-233 234 234-235 211
URDC Fuses for DC and Traction Applications Article 9032020 9032021 9037020 9037021 9037821 9033020 9033021 9038020 9038021 9038821 9008310 9008010 9008210 9022325 9022326 9020325 9020326 9021325 9021326 9008110 9008610 9009010 9009110 9009410 9009510 9022225 9022226 9020225 9020226 Bladed 171mm mounting centers Threaded M10 Threaded M10 Bladed 171mm mounting centers Threaded M12 Threaded M12 Bracket 172mm mounting centers Bracket 142mm mounting centers Bracket 142mm mounting centers Bracket 194mm mounting centers Bracket 194mm mounting centers Description 1000V DC SQB -DC92 No blown fuse indication With fitting for microswitch No blown fuse indication With fitting for microswitch SQB -DC92-2(Double Body) With fitting for microswitch SQB -DC93 No blown fuse indication With fitting for microswitch No blown fuse indication With fitting for microswitch SQB -DC93-2(Double Body) With fitting for microswitch NH4 No blown fuse indication 20mmx127mm With blown fuse indication With 2.5N Striker 1200V DC SQB-DC0 No blown fuse indication With fitting for microswitch SQB-DC2 No blown fuse indication With fitting for microswitch SQB-DC2-2(Double Body) No blown fuse indication With fitting for microswitch 1500V DC 20mmx127mm No blown fuse indication With 2.5N Striker 20mmx190mm No blown fuse indication With 2.5N Striker 36mmx190mm No blown fuse indication With 2.5N Striker 2000V DC SQB-DC0 No blown fuse indication With fitting for microswitch SQB-DC2 No blown fuse indication With fitting for microswitch Selection Guide Technical Data 236 236-237 238 238-239 240 240-241 242 243 244 244-245 246 246-247 248 248-249 250 250-251 252 252-253 254 254-255 256 256-257 258 258-259 260 260-261 212
URDC Fuses for DC and Traction Applications Article 9022125 9022126 9020125 9020126 9021125 9021126 9010010 9022025 9022026 9020025 9020026 9021025 9021026 2040704 2040404 Article 2800104 2800201 2800202 Bracket 246mm mounting centers Bracket 244mm mounting centers Bracket 244mm mounting centers Bracket 416mm mounting centers Bracket 416mm mounting centers Bracket 416mm mounting centers Description 2400V DC SQB-DC0 No blown fuse indication With fitting for microswitch 4000V DC 40mmx254mm No blown fuse indication 4200V DC SQB-DC0 No blown fuse indication With fitting for microswitch No blown fuse indication With fitting for microswitch 1000V AC NH3 No blown fuse indication 2000V AC NH3 No blown fuse indication Accessories for DC and Traction Application Fuses Description Selection Guide Microswitches - Standard Level M-Microswitch Standard Level Single Change Over Circuit 278 Standard Level No blown fuse indication With fitting for microswitch SQB-DC2 No blown fuse indication With fitting for microswitch SQB-DC2-2(Double Body) No blown fuse indication With fitting for microswitch SQB-DC2 SQB -DC92-2(Double Body) GL-Microswitch Single Change Over Circuit B-Microswitch Selection Guide 262 264 265 268 268-269 270 270 & 272 274 267 Technical Data 262-263 264 & 265 265-266 271 271-272 276 278 274-275 276-277 Technical Data 2800311 2800312 2800320 2800321 2800322 Standard Level Single Change Over Circuit Double Change Over Circuit 278-279 213
URDC 2801104 2800203 2800204 2800410 2800411 2800412 2800420 2800421 2800422 9108001 5106305.1DC 5106305.1LDC 5106305.2DC 5106305.2LDC 5105805.1DC 5105805.1LDC 5105805.1SDC 5105805.2DC 5105805.2LDC 5106305.1 5106305.1L 5106305.2 5106305.2L 5106305.3 5106305.3L 5106305.4 5106305.4L 2155601 2500301 2100301.26 2118901 2118908 2118911 9109001 9109401 9109601 Low Level Low Level Low Level Accessories for DC and Traction Application Fuses 20mmx127mm 1-Pole 10mmx38mm 1-Pole, 1000V DC 10mmx38mm 1-Pole, 1000V DC 10mmx38mm 2-Pole, 1000V DC 10mmx38mm 2-Pole, 1000V DC 14mmx51mm 1-Pole 14mmx51mm 2-Pole 10mmx38mm 1-Pole, 750V AC/DC 10mmx38mm 2-Pole, 750V AC/DC 10mmx38mm 3-Pole, 750V AC/DC 10mmx38mm 4-Pole, 750V AC/DC NH1, 1-Pole External wall for 21 556 01 Insulating Contact Cover 80mm mounting centers 20mmx190mm 36mmx190mm 36mmx250mm Microswitches - Low Level M-Microswitch Single Change Over Circuit GL-Microswitch Single Change Over Circuit 278 B-Microswitch Single Change Over Circuit Double Change Over Circuit Fuse Modules w/ Neon Lamp Indicator w/ Neon Lamp Indicator Fuse Modules w/ Neon Lamp Indicator w/ Microswitch w/ Neon Lamp Indicator w/ Neon Lamp Indicator w/ Neon Lamp Indicator w/ Neon Lamp Indicator w/ Neon Lamp Indicator Fuse Bases 278 279-280 280 281 282 283 281 284 285 214
1202103 p7 SIBA UR 175 516pp 8/22/13 3:32 PM Page 215 URDC Accessories for DC and Traction Application Fuses Fuse Clips and Terminals Article Description Fuse Clips and Terminals 5806316 10mm diameter contacts - PCB Mounting 5806319 10mm diameter contacts - PCB Mounting 5806317 10mm diameter contacts - Screw Mounting 6301701 Clamping Plate for 50 063 01 6101701.3 Terminal Link for 50 063 01 6100101.2 14mm diameter contacts - Screw Mounting 6301701 Clamping Plate for 61 001 01.2 5805806 6100201.3 6300201 6100201.4 5806006 6100401.3 6300201 9109401.3 9109401.4 14mm diameter contacts - PCB Mounting 20mm & 22mm diameter contacts - Screw Mounting Clamping Plate for 61 002 01.3 Terminal Link for 61 002 01.3 20mmx & 22mm diameter contacts - PCB Mounting 27mm diameter contact - Screw Mounting Clamping Plate for 61 004 01.3 36mm diameter contact - Screw Mounting Terminal Link for 91 094 01.3 Selection Guide Technical Data 286 287 288 289 215
URDC URDC E180276 Size 14x51mm Rated Current I n [A] 10 12 16 20 25 30 32 35 40 Without Indicator Article Number 5012434.10 5012434.12 5012434.16 5012434.20 5012434.25 5012434.30 5012434.32 5012434.35 5012434.40 Rated Voltage Rated Breaking Test Class [Un] Capacity Voltage grl UL 248-13 440V DC 30kA(L/R=30ms 440V DC (gs) IEC 60269-4 VDE 0636 Part 4 UL rec With Striker 2.5N Striker Article Number 5012634.10 5012634.12 5012634.16 5012634.20 5012634.25 5012634.30 5012634.32 5012634.35 UL rec 5012634.40 0.03 Units per Package 10 Without Indicator 63mm Article Number 5012934.10 5012934.12 5012934.16 5012934.20 5012934.25 5012934.30 5012934.32 5012934.35 5012934.40 UL rec Power Loss [W] 1.9 Pre-arcing I 2 t [A 2 s] 8 12 2.3 2.8 25 3.0 46 3.2 100 3.8 190 4.0 250 4.2 370 4.4 420 Total I 2 t * @ 440V DC [A 2 s] 70 105 210 400 850 1 600 2 100 3 150 3 600 * L/R=30ms A B B A 5012434 B C D Dimensions [in /mm] 2.00 / 51 0.55 / 14 A B C D E F G H 0.28 / 7 0.20 / 4.9 2.50 / 63.5 3.03 / 7 0.34 / 8.7 0.20 / 5.5 E F G H A 5012934 5012634 Accessories Fuse Modules - DIN Rail Mounting w/lockout Clip Page Fuse Clips 5105805.1DC 1-Pole 6100101.2 Fuse Clips Screw mounting 282 5105805.1LDC 1-Pole w/neon lamp indicator 6301701 Clamping plate for 6100101.2 5105805.2DC 2-Pole 5805806 Fuse Clips PCB mounting 5105805.2LDC 2-Pole w/neon lamp indicator Page 287 750V/50A E186970 216
URDC URDC E180276 Size 14x51mm Rated Voltage [Un] 440V DC Rated Breaking Test Capacity Voltage 30kA(L/R=30ms 440V DC Class grl (gs) UL 248-13 IEC 60269-4 VDE 0636 Part 4 Coefficients for Heavy Duty Applications a A2 B1 B2 Cf3 130 1.0 1.25 0.6 0.8 Time-Current Characteristics Virtual Pre-arcing time - [s] R.M.S. Prospective Current [A] 217
URDC URDC E180276 Size 22x58mm Rated Voltage [Un] 440V DC Rated Breaking Test Capacity Voltage 30kA(L/R=30ms) 440V DC Class grl (gs) UL 248-13 IEC 60269-4 VDE 0636 Part 4 Rated Current Without Indicator With 2.5N Without Indicator Without Indicator Power Loss Pre-arcing I 2 t Total I 2 t * I n UL Striker UL 80mm UL PCB UL @ 440V DC [A] Article Number rec Article Number rec Article Number rec Article Number rec [W] [A 2 s] [A 2 s] 25 5014034.25 5014234.25 5014534.25 5014634.25 3.6 100 800 30 5014034.30 5014234.30 5014534.30 5014634.30 4.6 190 1 500 32 5014034.32 5014234.32 5014534.32 5014634.32 4.8 250 2 000 35 5014034.35 5014234.35 5014534.35 5014634.35 5.0 370 2 900 40 5014034.40 5014234.40 5014534.40 5014634.40 5.2 420 3 300 50 5014034.50 5014234.50 5014534.50 5014634.50 5.4 870 6 800 63 5014034.63 5014234.63 5014534.63 5014634.63 6.8 1 300 10 200 80 5014034.80 5014234.80 5014534.80 5014634.80 7.5 2 500 19 500 100 5014034.100 5014234.100 5014534.100 5014634.100 7.7 4 600 35 800 Weight [kg/1] * L/R=30ms 0.055 Units per Package 10 5014034 5014234 22 22 4.9 58 58 7 5014634 Accessories 5014534 Fuse Modules - DIN Rail Mounting w/lockout Clip Page Fuse Clips & Terminal Links 5106005.1 1-Pole 283 6100201.3 Fuse Clips Screw mounting 5106005.1L 1-Pole w/neon lamp indicator 6300201 Clamping plate for 6100201.3 5106005.1S 1-Pole w/microswitch 6100201.4 Terminal Link for 6100201.3 5106005.2 2-Pole 5806006 Fuse Clips PCB mounting 5106005.2L 2-Pole w/neon lamp indicator 5106005.2S 2-Pole w/microswitch 750V/100A 5106005.3 3-Pole 5106005.3L 3-Pole w/neon lamp indicator E186970 5106005.3S 3-Pole w/microswitch Page 288 218
URDC URDC E180276 Size 22x58mm Rated Voltage Rated Breaking Test Class [Un] Capacity Voltage grl UL 248-13 440V DC 30kA(L/R=30ms) 440V DC (gs) IEC 60269-4 VDE 0636 Part 4 Coefficients for Heavy Duty Applications a A2 B1 B2 Cf3 130 1.0 1.25 0.6 0.8 Time-Current Characteristics Virtual Pre-arcing time - [s] R.M.S. Prospective Current [A] 219
URDC URDC E180276 Size 27x60mm Rated Current I n [A] 8 10 12 16 20 25 32 40 50 63 80 100 110 125 160 Without Indicator Article Number 5019006.8 5019006.10 5019006.12 5019006.16 5019006.20 5019006.25 5019006.32 5019006.40 5019006.50 5019006.63 5019006.80 5019006.100 5019006.110 5019006.125 5019006.160 0.09 Rated Voltage [Un] 660V DC /440V DC UL rec Rated Breaking Test Capacity Voltage 30kA Class gr Company Standard With Without Rated Voltage[U n ] Power Pre-arcing 2.5N Indicator Loss I 2 t Striker a 80mm UL Article Number Article Number rec [V] [W] [A 2 s] 5019106.8 5019206.8 660V DC 2.0 4 5019106.10 5019206.10 660V DC 2.2 8 5019106.12 5019206.12 660V DC 2.7 12 5019106.16 5019206.16 660V DC 3.1 32 5019106.20 5019206.20 660V DC 3.5 62 5019106.25 5019206.25 660V DC 3.9 130 5019106.32 5019206.32 660V DC 4.6 250 5019106.40 5019206.40 660V DC 6.6 420 5019106.50 5019206.50 660V DC 7.5 620 5019106.63 5019206.63 660V DC 8.9 1 200 5019106.80 5019206.80 660V DC 10.9 2 100 5019106.100 5019206.100 660V DC 13.5 3 500 5019106.110 5019206.110 660V DC 14.2 4 600 5019106.125 5019206.125 440V DC 16.0 7 900 5019106.160 5019206.160 440V DC 19.0 11 800 a Striker minimum operating Voltage 10V Weight [kg/1] 0.10 Units per Package 10 0.11 U n Total I 2 t * @660V DC [A 2 s] 20 40 60 160 310 650 1 250 2 100 3 100 6 000 10 500 17 500 23 000 29 600 44 900 * L/R=10ms 5019006 5019106 5019206 Fuse Clips & Terminal Links 6100401.3 Fuse Clips Screw mounting 6300201 Clamping plate for 6100401.3 Accessories Page 288 Page 220
URDC URDC E180276 Size 27x60mm Rated Voltage [Un] 660V DC /440V DC Rated Breaking Test Capacity Voltage 30kA U n Class gr Company Standard Coefficients for Heavy Duty Applications a A2 B1 B2 Cf3 130 0.6 1.25 0.6 0.8 Time-Current Characteristics Virtual Pre-arcing time - [s] R.M.S. Prospective Current [A] 221
URDC URDC E180276 Size 14x51mm Rated Voltage [Un] 700V DC Rated Breaking Test Capacity Voltage 50kA 700V DC Class ar UL 248-13 Rated Without Power Pre-arcing Total Current Indicator Loss I 2 t I 2 t * I n [A] 6 8 10 12 16 20 25 30 Article Number 5011806.6 5011806.8 5011806.10 5011806.12 5011806.16 5011806.20 5011806.25 5011806.30 UL rec [W] 1.3 1.7 2.6 3.1 4.7 6.0 7.6 9.8 [A 2 s] 2.9 3.9 6.5 8.0 12 20 32 @ 700V DC [A 2 s] 12 17 25 41 52 70 130 190 35 5011806.35 10.3 72 430 40 5011806.40 11.2 103 620 50 5011806.50 12.6 128 770 Weight [kg/1] * (L/R=1ms) 0.022 Units per Package 10 14 2.0 51 5011806 Accessories Fuse Modules - DIN Rail Mounting w/lockout Clip 5105805.1DC 1-Pole 5105805.1LDC 1-Pole w/neon lamp indicator 5105805.2DC 2-Pole 5105805.2LDC 2-Pole w/neon lamp indicator Page Fuse Clips 282 6100101.2 6301701 5805806 Fuse Clips Screw mounting Clamping plate for 6100101.2 Fuse Clips PCB mounting Page 287 750V/50A E186970 222
URDC URDC E180276 Size 14x51mm Rated Voltage Rated Breaking Test Class [Un] 700V DC Capacity 50kA Voltage 700V DC ar UL 248-13 Coefficients for Heavy Duty Applications a A2 B1 B2 Cf3 130 0.55 1.25 0.6 0.8 Time-Current Characteristics Virtual Pre-arcing time - [s] R.M.S. Prospective Current [A] E11806- _ Arc voltage diagram DC voltage reduction Reduction factor for for L/R power loss 1200 100 1,0 I p > 6 x In UL V DC 1000 800 L R 80 60 0,8 K w 0,6 600 40 0,4 400 20 0,2 200 200 400 600 800 UB V DC 0 200 400 600 800 UB V DC 0 0 0,2 0,4 0,6 0,8 1,0 IB I N 223
URDC URDC E180276 Size 14x51mm Rated Voltage [Un] 700V DC Rated Breaking Test Capacity Voltage 30kA 700V DC Class ar UL 248-13 Rated Without Without Power Pre-arcing Current Indicator Indicator Loss I 2 t I n UL 63mm UL [A] Article Number rec Article Number rec [W] [A 2 s] 10 5020106.10 5020206.10 1.1 12 12 5020106.12 5020206.12 1.2 20 16 5020106.16 5020206.16 2.0 32 20 5020106.20 5020206.20 2.3 63 25 5020106.25 5020206.25 3.1 82 32 5020106.32 5020206.32 4.1 130 40 5020106.40 5020206.40 4.6 250 50 5020106.50 5020206.50 7.0 330 63 5020106.63 5020206.63 9.5 512 Weight [kg / 1] 0.022 Units per Package 10 Total I 2 t* @ 700V DC [A 2 s] 67 120 190 360 480 740 1 460 1 900 3 900 *L/R=1ms A 5020106 B Dimensions [in /mm] A B C D E F G 2.00 / 51 0.55 / 14 - - 2.50 / 63.5 3.03 / 77 0.34 / 8.7 A E F B G H 5020206 Accessories Fuse Modules - DIN Rail Mounting w/lockout Clip Page Fuse Clips 5105805.1DC 1-Pole 6100101.2 Fuse Clips Screw mounting 282 5105805.1LDC 1-Pole w/neon lamp indicator 6301701 Clamping plate for 6100101.2 5105805.2DC 2-Pole 5805806 Fuse Clips PCB mounting 5105805.2LDC 2-Pole w/neon lamp indicator Page 287 750V/50A E186970 224
URDC URDC E180276 Size 14x51mm Rated Voltage [Un] 700V DC Rated Breaking Test Capacity Voltage 30kA 700V DC Class ar UL 248-13 Coefficients for Heavy Duty Applications a A2 B1 B2 Cf3 150 0.6 1.25 0.6 0.8 Time-Current Characteristics Virtual Pre-arcing time - [s] R.M.S. Prospective Current [A] E21006-60_0 Arc voltage DC voltage reduction Reduction factor for diagram for L/R power loss 1200 100 1.0 I > 6 x I p n U L V DC 1000 800 L R 80 60 0.8 K w 0.6 600 40 0.4 400 20 0.2 200 200 400 600 800 UB V DC 0 200 400 600 800 UB V DC 0 0 0.2 0.4 0.6 0.8 1.0 IB IN 225
URDC URDC Rated Voltage [Un] 700V DC E180276 Size NH000 - DIN 80 Rated Breaking Test Class Capacity Voltage ar 30kA 700V DC Fuse Links for Low Inductance Applications UL 248-13 VDE 0636 Part 40 Rated Without With Top With Top Power Pre-arcing Current Indicator Indicator Indicator Loss I 2 t I n DIN 80 UL DIN 80 UL 70mm [A] Article Number rec Article Number rec Article Number [W] [A 2 s] 35 2029221.35 2029220.35 2025920.35 14 26 50 2029221.50 2029220.50 2025920.50 17 104 63 2029221.63 2029220.63 2025920.63 20 140 80 2029221.80 2029220.80 2025920.80 23 330 100 2029221.100 2029220.100 2025920.100 26 930 125 2029221.125 2029220.125 2025920.125 30 1 400 160 2029221.160 2029220.160 2025920.160 35 1 950 200 2029221.200 2029220.200 2025920.200 40 3 740 250 2029221.250 2029220.250 2025920.250 45 5 580 315 2029221.315 2029220.315 2025920.315 51 12 300 Weight [kg/1] 0.17 Units per Package 3 Total I 2 t * @ 700V DC [A 2 s] 135 530 690 1 650 4 300 6 400 8 000 16 000 22 900 46 000 * (L/R=1ms) 2029221 / 2029220 2025920 Accessories Fuse Bases 2118901 2118908 Fuse Base 1-Pole 2118911 Page 284 E186970 226
URDC URDC E180276 Size NH000 - DIN 80 DIN80 Rated Voltage Rated Breaking Test Class [Un] Capacity Voltage ar UL 248-13 700V DC 30kA 700V DC VDE 0636 Part 40 Fuse Links for Low Inductance Applications Coefficients for Heavy Duty Applications a A2 B1 B2 Cf3 130 0.6 1.25 0.6 0.8 Time-Current Characteristics Virtual Pre-arcing time - [s] R.M.S. Prospective Current [A] 227
URDC URDC Rated Voltage [Un] 750V DC Rated Breaking Test Capacity Voltage 50kA 700V DC Class gr Company Standard Size NH1 Rated Current I n With Top Indicator Power Loss [A] Article Number [W] 32 2055604.32 5.9 40 2055604.40 7.1 50 2055604.50 8.6 63 2055604.63 10 80 2055604.80 12 100 2055604.100 15 125 2055604.125 19 160 2055604.160 23 Weight [kg/1] 0.37 Units per Package 3 Pre-arcing I 2 t [A 2 s] 100 180 290 410 740 1 300 2 500 3 700 Total I 2 t * @ 750V DC [A 2 s] 800 1 400 2 200 3 200 5 700 10 000 19 000 29 000 * (L/R=1ms) Indicator 2055604 Accessories Fuse Base 2155601 1-Pole, Page 281 Microswitch (Red Hammer) 2800202 Standard Level 2800204 Low Level Page 278 228
URDC URDC Rated Voltage [Un] 700V DC Rated Breaking Test Capacity Voltage 50kA 700V DC Class gr Company Standard Size NH1 Coefficients for Heavy Duty Applications a A2 B1 B2 Cf3 130 0.6 1.3 0.6 0.8 Time-Current Characteristics Virtual Pre-arcing time - [s] R.M.S. Prospective Current [A] 229
URDC URDC E180276 Size 10x38mm Rated Current I n [A] 4 6 8 10 12 16 20 Rated Voltage [Un] 1000V DC Rated Breaking Test Capacity Voltage 30kA(L/R=1ms) 1000V DC Without Without Without Indicator Indicator Indicator UL PCB UL 50.6mm UL Article Number rec Article Number rec Article Number rec 5021506.4 5021606.4 5021706.4 5021506.6 5021606.6 5021706.6 5021506.8 5021606.8 5021706.8 5021506.10 5021606.10 5021706.10 5021506.12 5021606.12 5021706.12 5021506.16 5021606.16 5021706.16 5021506.20 5021606.20 5021706.20 Weight [kg/1] 0.009 Units per Package 10 Class gr UL 248-13 Power Loss [W] 0.5 0.7 1.1 1.5 1.6 2.1 2.5 Pre-arcing I 2 t [A 2 s] 3 5 7 10 20 30 52 Total I 2 t * @ 1000V DC [A 2 s] 25 40 55 77 155 230 395 * (L/R=10ms) 5021506 5021606 5021706 Accessories Fuse Module -DIN Rail Mounting 5106304.DC 1-Pole w/neon lamp indicator 5106304.2DC 2-Pole Page 281 Fuse Clips 5806316 Fuse Clips PCB mounting 5806319 Fuse Clips PCB mounting 58063 7 Fuse Clips Screw Mounting 6101701.3 Terminal Link Page 286 230
URDC URDC E180276 Size 10x38mm Rated Voltage [Un] 1000V DC Rated Breaking Test Capacity Voltage 30kA(L/R=1ms) 1000V DC Class gr UL 248-13 Coefficients for Heavy Duty Applications a A2 B1 B2 Cf3 130 0.9 1.25 0.5 0.8 Time-Current Characteristics Virtual Pre-arcing time - [s] R.M.S. Prospective Current [A] 231
URDC URDC Size SQB-DC90 Rated Current I n [A] 50 63 80 100 125 160 Rated Voltage [Un] 900V DC Rated Breaking Test Capacity Voltage 30kA(L/R=30ms) 1000V DC 100kA(L/R=40ms) 900V DC 100kA(L/R=100ms 750V DC Without With Without With Indicator Microswitch Indicator Microswitch Adapter Adapter Article Number Article Number Article Number Article Number 9030020.50 9030021.50 9035020.50 9035021.50 9030020.63 9030021.63 9035020.63 9035021.63 9030020.80 9030021.80 9035020.80 9035021.80 9030020.100 9030021.100 9035020.100 9035021.100 9030020.125 9030021.125 9035020.125 9035021.125 9030020.160 9030021.160 9035020.160 9035021.160 Bladed Contacts Threaded Contacts Weight [kg/1] 0.8 0.7 Units per Package 1 Class gr IEC 60 077-5 UIC 550 VDE 0115 Part 460-5 Power Loss [W] 11 13 16 19 24 31 Pre-arcing I 2 t [A 2 s] 480 900 1 900 3 600 6 600 11 200 Total I 2 t* @ 1000V DC [A 2 s] 3 200 6 200 13 000 24 500 45 000 76 500 * (L/R=10ms) Coefficients for Heavy Duty Applications a A2 B1 B2 Cf3 130 0.6 1.25 0.5 0.8 Time-Current Characteristics Virtual Pre-arcing time - [s] R.M.S. Prospective Current [A] 232
URDC URDC Size SQB-DC90 Rated Voltage [Un] 900V DC Rated Breaking Test Capacity Voltage 30kA(L/R=30ms) 1000V DC 100kA(L/R=40ms) 900V DC 100kA(L/R=100ms 750V DC Class gr IEC 60 077-5 UIC 550 VDE 0115 Part 460-5 Dimensions [in / mm 9030020 9030021 4.88 / 124 0.79 / 20 1.69 / 43 6.14 / 156 0.24 / 6 0.43 / 11 0.43 / 11 7.13 / 181 A 4.88 / 124 B 0.79 / 20 D 1.69 / 43 E 6.14 / 156 F 0.24 / 6 G 2.28 / 58 H 3.27 / 83 I 0.43 / 11 J 0.43 / 11 L 7.13 / 181 9030020 Accessories B & M Microswitches 278-280 9030021 Dimensions [in / mm 9035020 4.88 / 124 A 9035021 4.88 / 124 0.79 / 20 B 0.79 / 20 1.69 / 43 D 1.69 / 43 G 2.28 / 58 H 3.27 / 83 4.96 / 126 L 4.96 / 126 M8 M M8 Thread Depth 0.39 / 10 Maximum Torque 22N m 16.2lb ft 9035020 9035021 233
URDC URDC Size SQB-DC91 Rated Voltage [Un] 900V DC Rated Breaking Test Class Capacity Voltage gr IEC 60 077-5 30kA(L/R=30ms) 1000V DC UIC 550 100kA(L/R=40ms) 900V DC VDE 0115 Part 460-5 100kA(L/R=100ms 750V DC Rated Without With Without With Power Current Indicator Microswitch Indicator Microswitch Loss I n Adapter Adapter [A] Article Number Article Number Article Number Article Number [W] 160 9031020.160 9031021.160 9036020.160 9036021.160 28 200 9031020.200 9031021.200 9036020.200 9036021.200 37 250 9031020.250 9031021.250 9036020.250 9036021.350 45 Bladed Contacts Threaded Contacts Weight [kg/1] 1.2 1.1 Units per Package 1 Pre-arcing I 2 t [A 2 s] 9 500 17 000 27 000 Total I 2 t* @ 1000V DC [A 2 s] 51 000 116 000 184 000 * (L/R=10ms) Coefficients for Heavy Duty Applications a A2 B1 B2 Cf3 130 0.6 1.25 0.5 0.8 Time-Current Characteristics Virtual Pre-arcing time - [s] R.M.S. Prospective Current [A] 234
URDC URDC Size SQB-DC91 Rated Voltage [Un] 900V DC Rated Breaking Test Capacity Voltage 30kA(L/R=30ms) 1000V DC 100kA(L/R=40ms) 900V DC 100kA(L/R=100ms 750V DC Class gr IEC 60 077-5 UIC 550 VDE 0115 Part 460-5 Dimensions [in / mm 9031020 5.08 / 129 A 1.02 / 26 B 2.01 / 51 D 6.54 / 166 E 0.24 / 6 F G H 0.73 / 18.5 I 0.43 / 11 J 7.48 / 190 L 9031021 5.08 / 129 1.02 / 26 2.01 / 51 6.54 / 166 0.24 / 6 2.60 / 66 3.58 /91 0.73 / 18.5 0.43 / 11 7.48 / 190 9031020 Accessories B & M Microswitches 278-280 9031021 Dimensions [in / mm 9036020 9036021 5.08 / 129 A 5.08 / 129 0.94 / 22 B 0.94 / 22 2.01 / 51 D 2.01 / 51 G 2.60 / 66 H 3.58 /91 5.18 / 131.5 L 5.18 / 131.5 M10 M M10 Thread Depth 0.43 / 11 Maximum Torque 39N m 28.7lb ft 9036020 9036021 235
URDC URDC Rated Voltage [Un] 900V DC Size SQB-DC92 Rated Breaking Test Class Capacity Voltage gr IEC 60 077-5 30kA(L/R=30ms) 1000V DC UIC 550 100kA(L/R=40ms) 900V DC VDE 0115 Part 460-5 100kA(L/R=100ms 750V DC Rated Without With Without With Power Pre-arcing Total Current Indicator Microswitch Indicator Microswitch Loss I 2 t I 2 t* I n Adapter Adapter @ 1000V DC [A] Article Number Article Number Article Number Article Number [W] [A 2 s] [A 2 s] 250 9032020.250 9032021.250 9037020.250 9037021.250 48 21 500 141 000 315 9032020.315 9032021.315 9037020.315 9037021.315 57 38 000 249 000 350 9032020.350 9032021.350 9037020.350 9037021.350 61 57 100 374 000 400 9032020.400 9032021.400 9037020.400 9037021.400 67 79 800 522 000 Bladed Contacts Threaded Contacts * (L/R=10ms) Weight [kg/1] 1.36 1.26 Units per Package 1 Coefficients for Heavy Duty Applications a A2 B1 B2 Cf3 130 0.6 1.25 0.5 0.8 Time-Current Characteristics Virtual Pre-arcing time - [s] R.M.S. Prospective Current [A] 236
URDC URDC Size SQB-DC92 Rated Voltage [Un] 900V DC Rated Breaking Test Capacity Voltage 30kA(L/R=30ms) 1000V DC 100kA(L/R=40ms) 900V DC 100kA(L/R=100ms 750V DC Class gr IEC 60 077-5 UIC 550 VDE 0115 Part 460-5 Dimensions [in / mm 9032020 9032021 5.08 / 129 A 5.08 / 129 1.02 / 26 B 1.02 / 26 2.36 / 60 D 2.36 / 60 6.73 / 171 E 6.73 / 171 0.24 / 6 F 0.24 / 6 G 2.95 / 75 H 3.94 / 100 0.77 / 19.5 I 0.77 / 19.5 0.51 / 13 J 0.51 / 13 8.11 / 206 L 8.11 / 206 9032020 Accessories B & M Microswitches 278-280 9032021 Dimensions [in / mm 90 370 20 90 370 21 5.08 / 129 A 5.08 / 129 0.94 / 24 B 0.94 / 24 2.36 / 60 D 2.36 / 60 G 2.95 / 75 H 3.94 / 100 5.18 / 131.5 L 5.18 / 131.5 M10 M M10 Thread Depth 0.43 / 11 Maximum Torque 39N m 28.7lb ft 9037020 9037021 237
URDC URDC Size SQB-DC92-2 Rated Current I n [A] 500 630 700 800 With Microswitch Adapter Article Number 9037821.500 9037821.630 9037821.700 9037821.800 Weight [kg/1] 2.59 Units per Package 1 Rated Voltage [Un] 900V DC Rated Breaking Test Capacity Voltage 30kA(L/R=30ms) 1000V DC 100kA(L/R=40ms) 900V DC 100kA(L/R=100ms 750V DC Class gr IEC 60 077-5 UIC 550 VDE 0115 Part 460-5 Power Loss [W] 96 114 122 134 Pre-arcing I 2 t [A 2 s] 86 000 152 000 228 400 319 200 Total I 2 t* @ 1000V DC [A 2 s] 564 000 996 000 1 496 000 2 088 000 * (L/R=10ms) Coefficients for Heavy Duty Applications a A2 B1 B2 Cf3 130 0.6 1.25 0.5 0.8 Time-Current Characteristics Virtual Pre-arcing time - [s] R.M.S. Prospective Current [A] 238
URDC URDC Rated Voltage [Un] 900V DC Size SQB-DC92-2 Rated Breaking Test Capacity Voltage 30kA(L/R=30ms) 1000V DC 100kA(L/R=40ms) 900V DC 100kA(L/R=100ms 750V DC Class gr IEC 60 077-5 UIC 550 VDE 0115 Part 460-5 Dimensions [ in / mm] A 5.08 / 129 B 1.77 / 45 C 0.43 / 11 D 2.36 / 60 F 0.16 / 4 G 5.79 / 147 H 6.77 / 172 I 2.83 / 72 J 1.89 / 48 K 5.81 / 147.6 L 5.18 / 131.5 M M10 Thread Depth 0.43 / 11 Maximum Torque 39N m 28.7lb ft Accessories B & M Microswitches 278-280 9037821 239
URDC URDC Size SQB-DC93 Rated Voltage [Un] 900V DC Rated Breaking Test Capacity Voltage 30kA(L/R=30ms) 1000V DC 100kA(L/R=40ms) 900V DC 100kA(L/R=100ms 750V DC Class gr IEC 60 077-5 UIC 550 VDE 0115 Part 460-5 Rated Without With Without With Power Pre-arcing Total Current Indicator Microswitch Indicator Microswitch Loss I 2 t I 2 t* I n Adapter Adapter (L/R=10ms) [A] Article Number Article Number Article Number Article Number [W] [A 2 s] [A 2 s] 450 9033020.450 9033021.450 9038020.450 9038021.450 75 106 000 691 000* 500 9033020.500 9033021.500 9038020.500 9038021.500 86 129 000 835 000* 550 9033020.550 9033021.550 9038020.550 9038021.550 97 153 000 1 357 000** 630 9033020.630 9033021.630 9038020.630 9038021.630 112 180 000 1 615 000** 700 9033020.700 9033021.700 9038020.700 9038021.700 127 240 000 2 150 000** Bladed Contacts Threaded Contacts * @ 1000V DC Weight [kg/1] ** @ 900V DC 2.06 1.96 Units per Package 1 Coefficients for Heavy Duty Applications a A2 B1 B2 Cf3 130 0.6 1.25 0.5 0.8 Time-Current Characteristics Virtual Pre-arcing time - [s] R.M.S. Prospective Current [A] 240
URDC URDC Size SQB-DC93 Rated Voltage [Un] 900V DC Rated Breaking Test Capacity Voltage 30kA(L/R=30ms) 1000V DC 100kA(L/R=40ms) 900V DC 100kA(L/R=100ms 750V DC Class gr IEC 60 077-5 UIC 550 VDE 0115 Part 460-5 Dimensions [in / mm 9033020 5.14 / 130.5 A 1.38 / 35 B 2.87 / 73 D 6.73 / 171 E 0.24 / 6 F G H 0.94 / 24 I 0.51 / 13 J 8.11 / 206 L 9033021 5.14 / 130.5 1.38 / 35 2.87 / 73 6.73 / 171 0.24 / 6 3.46 / 88 4.45 / 113 0.94 / 24 0.51 / 13 8.11 / 206 9033020 Accessories B & M Microswitches 278-280 9033021 Dimensions [in / mm 90 380 20 90 380 21 5.14 / 130.5 A 5.14 / 130.5 1.10 / 28 B 1.10 / 28 2.87 / 73 D 2.87 / 73 G 3.46 / 88 H 4.45 / 113 5.18 / 131.5 L 5.18 / 131.5 M12 M M12 Thread Depth 0.51 / 13 Maximum Torque 52N m 38.3lb ft 9038020 9038021 241
URDC URDC Size SQB-DC93-2 Rated Voltage [Un] 900V DC Rated Breaking Test Capacity Voltage 30kA(L/R=30ms) 1000V DC 100kA(L/R=40ms) 900V DC 100kA(L/R=100ms 750V DC Class gr IEC 60 077-5 UIC 550 VDE 0115 Part 460-5 Rated With Power Pre-arcing Total Current Microswitch Loss I 2 t I 2 t* I n Adapter (L/R=10ms) [A] Article Number [W] [A 2 s] [A 2 s] 900 9038821.900 150 424 000 2 764 000* 1000 9038821.1000 172 516 000 3 340 000* 1100 9038821.1100 194 612 000 5 428 000** 1250 9038821.1250 224 720 000 6 460 000** 1400 9038821.1400 254 960 000 8 600 000** Weight [kg/1] * @ 1000V DC 4.04 ** @ 900V DC Units per Package 1 Coefficients for Heavy Duty Applications a A2 B1 B2 Cf3 130 0.6 1.25 0.5 0.8 Accessories B & M Microswitches 287-289 Time-Current Characteristics Dimensions [ in / mm] A 5.14 / 130.5 B 1.97 / 50 C 0.51 / 13 D 2.87 / 73 F 0.16 / 4 G 6.85 / 174 H 7.83 / 199 I 3.39 / 86 J 2.13 / 54 K 5.81 / 147.6 L 5.18 / 131.5 M M12 Thread Depth 0.51 / 13 9038821 Maximum Torque 52N m 38.3lb ft Virtual Pre-arcing time - [s] R.M.S. Prospective Current [A] 242
URDC URDC Rated Voltage [Un] 1000V DC Rated Breaking Test Capacity Voltage 40kA 1000V DC Class gf IEC 60 077-5 UIC 550 Size NH4 Rated Current I n [A] 500 550 630 700 800 Without Indicator Article Number 9008310.500 9008310.550 9008310.630 9008310.700 9008310.800 Weight [kg/1] 3.9 Units per Package 1 Power Loss [W] Pre-arcing I 2 t [A 2 s] 250 000 330 000 480 000 695 000 1 030 000 Total I 2 t * @ 1000V DC [A 2 s] 750 000 980 000 1 400 000 2 000 000 2 900 000 * (L/R=15ms) 9008310 Coefficients for Heavy Duty Applications a A2 B1 B2 Cf3 130 0.6 1.25 0.6 0.8 Time-Current Characteristics Virtual Pre-arcing time - [s] R.M.S. Prospective Current [A] 243
URDC URDC Rated Voltage [Un] 1000V DC Rated Breaking Test Capacity Voltage 100kA 1000V DC Class ar/gr EN IEC 60269-4 DIN VDE-0636 Part 40 Size 20x127mm Rated Power Pre-arcing Total Current Loss I 2 t I 2 t* I n @ 1000V DC [A] Article Number Article Number [W] [A 2 s] [A 2 s] Without Indicator 3.15 9008010.3.15 ar 9008210.3.15 ar 4.1 2 13 With Indicator With Striker 6 9008010.6 gr 9008210.6 gr 3.0 3 17 8 9008010.8 gr 9008210.8 gr 3.2 7 42 10 9008010.10 gr 9008210.10 gr 3.4 13 75 12 9008010.12 gr 9008210.12 gr 4.6 20 120 16 9008010.16 gr 9008210.16 gr 5.7 52 300 20 9008010.20 gr 9008210.20 gr 6.8 82 470 25 9008010.25 gr 9008210.25 gr 8.1 118 670 32 9008010.32 gr 9008210.32 gr 10.0 184 1 050 40 9008010.40 gr 9008210.40 gr 12.0 472 2 700 50 9008010.50 gr 9008210.50 gr 13.2 737 4 200 63 9008010.63 gr 9008210.63 gr 17.7 1 300 7 500 Weight [kg/1] * (L/R=1ms) 0.1 Units per Package 12 9008010 Accessories 9008210 Fuse Modules Page Fuse Clips 9108001 1-Pole 6100201.3 Fuse Base 280 6300201 9108001-B1 1-Pole 6100201.4 5806006 Fuse Clips Screw mounting Clamping plate for 6100201.3 Terminal Link for 6100201.3 Fuse Clips PCB mounting Page 287-288 244
URDC URDC Rated Voltage [Un] 1000V DC Rated Breaking Test Capacity Voltage 100kA 1000V DC Class ar/gr EN IEC 60269-4 DIN VDE-0636 Part 40 Size 20x127mm Coefficients for Heavy Duty Applications a A2 B1 B2 Cf3 130 0.6 1.25 0.6 0.8 Time-Current Characteristics Virtual Pre-arcing time - [s] R.M.S. Prospective Current [A] UL VDC 2500 2000 1500 Arc voltage DC voltage reduction Reduction factor for diagram for L/R power loss L R 100 80 60 I p >6xIn K w 1.0 0.8 0.6 1000 40 0.4 500 20 0.2 0 0 400 800 1200 U V B DC 0 800 900 1000 1100 U V B DC 0 0 0.2 0.4 0.6 0.8 1.0 IB IN 245
URDC URDC Rated Voltage [Un] 900V DC Rated Breaking Test Capacity Voltage 30kA 1200V DC Class ar IEC 60 077-5 UIC 550 Size SQB-DC0 Rated Without With Current Indicator Microswitch I n Adapter [A] Article Number Article Number 25 9022325.25 9022326.25 32 9022325.32 9022326.32 40 9022325.40 9022326.40 50 9022325.50 9022326.50 63 9022325.63 9022326.63 80 9022325.80 9022326.80 100 9022325.100 9022326.100 125 9022325.125 9022326.125 160 9022325.160 9022326.160 200 9022325.200 9022326.200 215 9022325.215 9022326.215 Weight [kg/1] 2 Units per Package 1 Power Loss [W] 15 19 23 28 34 41 50 58 80 88 Pre-arcing I 2 t [A 2 s] 20 45 80 130 250 510 1 000 1 650 2 500 5 250 Total I 2 t* @ 1200V DC [A 2 s] 190 410 730 1 150 2 250 4 600 8 900 14 800 16 500 35 000 * (L/R=15ms) 9022325 M8 Contact Bolt Maximum Torque 15N m 11.1lb ft 133lb in Accessories B & M Microswitches 278-280 9022326 246
URDC URDC Rated Voltage Rated Breaking Test Class [Un] Capacity Voltage ar IEC 60 077-5 900V DC 30kA 1200V DC UIC 550 Size SQB-DC0 Coefficients for Heavy Duty Applications a A2 B1 B2 Cf3 130 0.55 1.25 0.6 0.8 Time-Current Characteristics Virtual Pre-arcing time - [s] R.M.S. Prospective Current [A] 247
URDC URDC Rated Voltage [Un] 900V DC Rated Breaking Test Capacity Voltage 30kA 1200V DC Class ar IEC 60 077-5 UIC 550 Size SQB-DC2 Rated Without With Power Pre-arcing Total Current Indicator Microswitch Loss I 2 t I 2 t* I n Adapter @ 1200V DC [A] Article Number Article Number [W] [A 2 s] [A 2 s] 100 9020325.100 9020326.100 60 620 5 400 125 9020325.125 9020326.125 68 1 150 10 100 160 9020325.160 9020326.160 78 2 100 18 000 200 9020325.200 9020326.200 89 4 000 36 000 250 9020325.250 9020326.250 101 8 200 73 000 315 9020325.315 9020326.315 114 15 000 133 000 350 9020325.350 9020326.350 128 18 500 106 000 400 9020325.400 9020326.400 Weight [kg/1] 137 26 500 151 000 * (L/R=15ms) 3.5 M8 Contact Bolt Units per Package Maximum Torque 1 15N m 11.1lb ft 133lb in 9020325 Accessories B & M Microswitches 278-280 9020326 248
URDC URDC Rated Voltage Rated Breaking Test Class [Un] Capacity Voltage ar IEC 60 077-5 900V DC 30kA 1200V DC UIC 550 Size SQB-DC2 Coefficients for Heavy Duty Applications a A2 B1 B2 Cf3 130 0.55 1.25 0.6 0.8 Time-Current Characteristics Virtual Pre-arcing time - [s] R.M.S. Prospective Current [A] 249
URDC URDC Rated Voltage [Un] 900V DC Rated Breaking Test Class Capacity Voltage ar IEC 60 077-5 30kA 1200V DC UIC 550 Size SQB-DC2-2 Rated Without With Current Indicator Microswitch I n Adapter [A] Article Number Article Number 500 9021325.500 9021326.500 630 9021325.630 9021326.630 700 9021325.700 9021326.700 800 9021325.800 9021326.800 Weight [kg/1] 7.0 Units per Package 1 Accessories B & M Microswitches 278-280 Power Loss [W] 212 240 269 288 Pre-arcing I 2 t [A 2 s] 32 800 60 000 74 000 106 000 Total I 2 t* @ 1200V DC [A 2 s] 292 000 532 000 424 000 604 000 * (L/R=15ms) 9021325 9021326 M8 Contact Bolt Maximum Torque 15N m 11.1lb ft 133lb in 250
URDC URDC Rated Voltage [Un] 900V DC Rated Breaking Test Capacity Voltage 30kA 1200V DC Class ar IEC 60 077-5 UIC 550 Size SQB-DC2-2 Coefficients for Heavy Duty Applications a A2 B1 B2 Cf3 130 0.55 1.25 0.6 0.8 Time-Current Characteristics Virtual Pre-arcing time - [s] R.M.S. Prospective Current [A] 251
URDC URDC Size 20x127mm Rated Voltage [Un] 1500V DC Rated Breaking Test Capacity Voltage 30kA 1500V DC Rated Without With With Current Indicator Indicator 2.5N I n Striker [A] Article Number Article Number Article Number 2 3.15 9008110.2 9008110.3.15 ar ar 5 9008110.5 gr 9008610.5 gr 6 9008110.6 gr 9008610.6 gr 8 9008110.8 gr 9008610.8 gr 10 9008110.10 gr 9008610.10 gr 12 9008110.12 gr 9008610.12 gr 16 9008110.16 gr 9008610.16 gr 20 9008110.20 gr 9008610.20 gr 25 9008110.25 gr 9008610.25 gr Weight [kg/1] 0.1 Units per Package 12 Class ar/gr IEC 60 269-4 VDE 0636-4 DIN EN 60 369-4 Power Pre-arcing Total Loss I 2 t I 2 t* @ 1500V DC [W] [A 2 s] [A 2 s] 3.9 0.64 5 4.1 2.0 16 3.0 4.8 11 3.0 3.0 17 3.2 7.0 42 3.4 13 75 3.6 20 120 4.6 52 300 5.5 82 470 6.9 118 670 * (L/R=1ms) 9008110.2-3.15 9008110.5-25 / 9008610.5-25 Accessories Fuse Modules Page Fuse Clips Page 9108001 1-Pole 6100201.3 Fuse Clips Screw mounting Fuse Base 280 6300201 Clamping plate for 6100201.3 287-288 9108001-B1 1-Pole 6100201.4 Terminal Link for 6100201.3 5806006 Fuse Clips PCB mounting 252
URDC URDC Size 20x127mm Rated Voltage Rated Breaking Test Class [Un] Capacity Voltage ar/gr 1500V DC 30kA 1500V DC Coefficients for Heavy Duty Applications a A2 B1 B2 Cf3 130 0.6 1.25 0.6 0.8 IEC 60 269-4 VDE 0636-4 DIN EN 60 369-4 Time-Current Characteristics Time-Current Characteristics Virtual Pre-arcing time - [s] R.M.S. Prospective Current [A] T08110- _ 3000 Arc voltage DC voltage reduction Reduction factor for diagram for L/R power loss 100 I p > 6 x In 1.0 U L V DC 2500 2000 L R 80 60 K w 0.8 0.6 1500 40 0.4 1000 20 0.2 500 500 1000 1500 UB V DC 0 1000 1500 UB V DC 2000 0 0 0.2 0.4 0.6 0.8 1.0 IB IN 253
URDC URDC Size 20x190mm Rated Voltage [Un] 1500V DC Rated Breaking Test Class Capacity Voltage gr IEC 60 077-5 60kA 1500V DC UIC 550 VDE 0115 Part 460-5 Rated Without With Power Pre-arcing Total Current Indicator 2.5N Loss I 2 t I 2 t I n Striker @ 1500V DC [A] Article Number Article Number [W] [A 2 s] [A 2 s] 6 9009010.6 9009110.6 3.1 7.4 44 8 9009010.8 9009110.8 4.1 13 80 10 9009010.10 9009110.10 4.4 30 180 12 9009010.12 9009110.12 4.7 53 320 16 9009010.16 9009110.16 6.2 90 550 20 9009010.20 9009110.20 7.6 150 900 25 9009010.25 9009110.25 8.1 240 1 400 32 9009010.32 9009110.32 9.7 600 3 600 Weight [kg/1] 0.11 Units per Package 6 9009010 9009110 Accessories Fuse Base Page 9109001 1-Pole 285 Fuse Clips 6100201.3 6300201 6300201.4 5806006 Fuse Clips Screw mounting Clamping plate for 6100201.3 Terminal Link for 6100201.3 Fuse Clips PCB mounting Page 287-288 254
URDC URDC Size 20x190mm Rated Voltage [Un] 1500V DC Rated Breaking Test Class Capacity Voltage gr IEC 60 077-5 60kA 1500V DC UIC 550 VDE 0115 Part 460-5 Coefficients for Heavy Duty Applications a A2 B1 B2 Cf3 130 0.6 1.25 0.6 0.8 Time-Current Characteristics Virtual Pre-arcing time - [s] R.M.S. Prospective Current [A] T09010-60 _0 Arc Voltage Arc Voltage Diagram Diagram Reduction Reduction factor for factor I 2 t for I 2 t Reduction Reduction factor for for factor powe powe for powe 3000 100 1.0 U L V DC 2500 2000 L R 80 60 K w 0.8 0.6 1500 40 0.4 1000 20 0.2 500 500 1000 1500 2000 UB V DC 0 500 1000 1500 2000 UB V DC 0 0 0.2 0.4 0.6 0.8 1.0 IB I N 255
URDC URDC Rated Voltage [Un] Rated Breaking Test Capacity Voltage 30kA 1500V DC Class gr In compliance with VDE 0636-1 & 4 Size 36x190mm Rated Without With Power Pre-arcing Total Current Indicator 2.5N Loss I 2 t I 2 t* I n Striker @ 1500V DC [A] Article Number Article Number [W] [A 2 s] [A 2 s] 20 9009410.20 9009510.20 9 60 470 25 9009410.25 9009510.25 12 100 770 32 9009410.32 9009510.32 16 130 950 40 9009410.40 9009510.40 22 290 2 200 50 9009410.50 9009510.50 25 620 4 600 63 9009410.63 9009510.63 30 1 000 7 500 80 9009410.80 9009510.80 34 2 050 15 300 100 9009410.100 9009510.100 38 3 500 25 800 Weight [kg/1] * (L/R=30ms) 1 Units per Package 1 9009410 9009510 Accessories Fuse Modules 9109401 1-Pole Page 285 Fuse Clips 9100401.3 9101401.4 Fuse Clips Screw mounting Terminal Link for 6100201.3 Page 288 256
URDC URDC Rated Voltage [Un] 1500V DC Rated Breaking Test Capacity Voltage 30kA 1500V DC Class gr In compliance with VDE 0636-1 & 4 Size 36x190mm Coefficients for Heavy Duty Applications a A2 B1 B2 Cf3 130 0.6 1.25 0.6 0.8 10 4 Time-Current Characteristics 10 3 s 10 2 Virtual Pre-arcing time - [s] 10 1 10 0 20A 32A 25A 40 A x 63A 50A 80A 100 A 10-1 8 6 5 4 3 2 10-2 10 1 2 3 4 5 6 8 10 2 2 3 4 5 6 8 10 3 2 3 4 5 6 8 10 4 A 2 3 4 5 6 8 10 5 R.M.S. Prospective Current [A] M8 Contact Bolt Maximum Torque 15N m 11.1lb ft 133lb in 257
URDC URDC Rated Voltage [Un] 1700V DC Rated Breaking Test Capacity Voltage 30kA 2000V DC Class ar IEC 60 077-5 UIC 550 Size SQB-DC0 Rated Without With Current Indicator Microswitch I n Adapter [A] Article Number Article Number 20 9022225.20 9022226.20 25 9022225.25 9022226.25 32 9022225.32 9022226.32 40 9022225.40 9022226.40 50 9022225.50 9022226.50 63 9022225.63 9022226.63 80 9022225.80 9022226.80 100 9022225.100 9022226.100 125 9022225.125 9022226.125 150 9022225.150 9022226.150 200 9022225.200 9022226.200 Weight [kg/1] 2 Units per Package 1 M8 Contact Bolt Maximum Torque 15N m 11.1lb ft 133lb in Power Loss Pre-arcing I 2 t [W] [A 2 s] 25 11.5 28 20 37 32 43 46 57 82 60 184 73 328 75 80 85 125 1 000 1 660 2 950 5 300 Total I 2 t* @ 2000V DC [A 2 s] 96 170 270 390 680 1 600 2 700 8 400 13 800 24 500 30 000 * (L/R=15ms) Accessories M Microswitches 9022225 278-280 9022226 258
URDC URDC Rated Voltage Rated Breaking Test Class [Un] Capacity Voltage ar IEC 60 077-5 1700V DC 30kA 2000V DC UIC 550 Size SQB-DC0 Coefficients for Heavy Duty Applications a A2 B1 B2 Cf3 130 0.55 1.25 0.6 0.8 Time-Current Characteristics Virtual Pre-arcing time - [s] R.M.S. Prospective Current [A] 259
URDC URDC Rated Voltage [Un] 1700V DC Rated Breaking Test Capacity Voltage 30kA 2000V DC Class ar IEC 60 077-5 UIC 550 Size SQB-DC2 Rated Without With Power Pre-arcing Total Current Indicator Microswitch Loss I 2 t I 2 t* I n Adapter @ 2 000V DC [A] Article Number Article Number [W] [A 2 s] [A 2 s] 125 9020225.125 9020226.125 89 1 300 10 900 160 9020225.160 9020226.160 103 2 500 20 600 200 9020225.200 9020226.200 115 5 200 38 300 250 9020225.250 9020226.250 134 9 900 82 500 315 9020225.315 9020226.315 152 20 300 170 000 350 9020225.350 9020226.350 165 25 000 120 000 400 9020225.400 9020226.400 178 40 000 190 000 Weight [kg/1] * (L/R=15ms) 2 Units per Package Accessories 1 M Microswitches 278-280 M8 Contact Bolt Maximum Torque 15N m 11.1lb ft 133lb in 9020225 9020226 260
URDC URDC Rated Voltage Rated Breaking Test Class [Un] Capacity Voltage ar IEC 60 077-5 1700V DC 30kA 2000V DC UIC 550 Size SQB-DC2 Coefficients for Heavy Duty Applications a A2 B1 B2 Cf3 130 0.55 1.25 0.6 0.8 Time-Current Characteristics Virtual Pre-arcing time - [s] R.M.S. Prospective Current [A] 261
URDC URDC Rated Voltage [Un] 1800V DC Rated Breaking Test Class Capacity Voltage ar IEC 60 077-5 30kA 2400V DC UIC 550 Size SQB-DC0 Rated Without With Current Indicator Microswitch I n Adapter [A] Article Number Article Number 25 9022125.25 9022126.25 32 9022125.32 9022126.32 40 9022125.40 9022126.40 50 9022125.50 9022126.50 63 9022125.63 9022126.63 80 9022125.80 9022126.80 100 9022125.100 9022126.100 125 9022125.125 9022126.125 150 9022125.150 9022126.150 Weight [kg/1] 2.9 Units per Package 1 Accessories M Microswitches 278-280 Power Pre-arcing Total Loss I 2 t I 2 t* @ 2400V DC [W] [A 2 s] [A 2 s] 28 32 260 38 46 380 45 82 700 56 128 1 050 60 228 2 400 72 512 4 200 75 1 150 9 400 80 2 050 16 700 98 3 330 27 100 * (L/R=15ms) M8 Contact Bolt Maximum Torque 15N m 11.1lb ft 133lb in 9022125 9022126 262
URDC URDC Size SQB-DC0 Rated Voltage [Un] 1800V DC Rated Breaking Test Class Capacity Voltage ar IEC 60 077-5 30kA 2400V DC UIC 550 Coefficients for Heavy Duty Applications a A2 B1 B2 Cf3 130 0.55 1.25 0.6 0.8 Time-Current Characteristics Virtual Pre-arcing time - [s] R.M.S. Prospective Current [A] 263
URDC URDC Rated Voltage [Un] 1800V DC Rated Breaking Test Capacity Voltage 30kA 2400V DC Class ar IEC 60 077-5 UIC 550 Size SQB-DC2 & SQB-DC2-2 Rated Without With Current Indicator Microswitch I n Adapter [A] Article Number Article Number 100 9020125.100 9020126.100 125 9020125.125 9020126.125 160 9020125.160 9020126.160 200 9020125.200 9020126.200 250 9020125.250 9020126.250 315 9020125.315 9020126.315 400 9020125.400 9020126.400 Weight [kg/1] 3.54 Units per Package 1 Size SQB-DC2 Accessories M Microswitches 278-280 Power Loss 355 9020125.355 9020126.355 177 [W] [A 2 s] [A 2 s] 58 68 82 96 130 175 180 Pre-arcing I 2 t 1 700 3 000 5 300 9 100 16 100 26 600 30 700 55 400 M8 Contact Bolt Maximum Torque 15N m 11.1lb ft 133lb in Total I 2 t* @ 2400V DC 13 500 24 000 42 700 73 500 131 000 216 000 288 000 401 000 * (L/R=15ms) 9020125 9020125 264
URDC URDC Rated Voltage [Un] 1800V DC Rated Breaking Test Capacity Voltage 30kA 2400V DC Class ar IEC 60 077-5 UIC 550 Size SQB-DC2 & SQB-DC2-2 Rated Current I n [A] 400 500 630 700 800 Without Indicator Article Number With Microswitch Adapter Article Number 9021125.400 9021126.400 9021125.500 9021126.500 9021125.630 9021126.630 9021125.700 9021126.700 9021125.800 9021126.800 Weight [kg/1] 7.08 Units per Package 1 Size SQB-DC2-2 Accessories M Microswitches 278-280 Power Loss [W] Pre-arcing I 2 t [A 2 s] 202 36 400 273 64 400 368 160 400 372 158 800 378 221 600 M8 Contact Bolt Maximum Torque 15N m 11.1lb ft 133lb in Total I 2 t* @ 2400V DC [A 2 s] 294 000 524 000 864 000 1 152 000 1 604 000 * (L/R=15ms) 9021125 9021126 265
URDC URDC Rated Voltage [Un] 1800V DC Rated Breaking Test Capacity Voltage 30kA 2400V DC Class ar IEC 60 077-5 UIC 550 Size SQB-DC2 & SQB-DC2-2 Coefficients for Heavy Duty Applications a A2 B1 B2 Cf3 130 0.55 1.25 0.6 0.8 Time-Current Characteristics Virtual Pre-arcing time - [s] R.M.S. Prospective Current [A] 266
URDC URDC Size 40x254mm Rated Without Current Indicator Rated Voltage [Un] 3600V DC Rated Breaking Test Capacity Voltage 3.2kA(L/R=16ms) 4000V DC 1.6kA(L/R=11ms) Class ar IEC 60 077-5 UIC 550 Power Pre-arcing Total Loss I 2 t I 2 t* I n [A] 2 3.15 3.9 5 6.3 8 12.5 16 20 Article Number 9010010.2 9010010.3.15 9010010.3.9 9010010.5 9010010.6.3 9010010.8 9010010.12.5 9010010.16 9010010.20 Weight [kg/1] 2 Units per Package 1 @ 4000V DC [W] [A 2 s] [A 2 s] 9 2.5 3.5 13 4 8 24 8 13 18 15 21 22 24 41 21 27 110 40 68 220 23 72 360 27 120 600 * (L/R=1ms) 9010010 Coefficients for Heavy Duty Applications a A2 B1 B2 Cf3 130 0.55 1.25 0.6 0.8 Time-Current Characteristics Virtual Pre-arcing time - [s] R.M.S. Prospective Current [A] 267
URDC URDC Rated Voltage [Un] 3600V DC Rated Breaking Test Capacity Voltage 30kA 4200V DC Class ar IEC 60 077-5 UIC 550 Size SQB-DC0 Rated Without With Power Pre-arcing Total Current Indicator Microswitch Loss I 2 t I 2 t* I n Adapter @ 4200V DC [A] Article Number Article Number [W] [A 2 s] [A 2 s] 40 9022025.40 9022026.40 91 82 640 50 63 9022025.50 9022025.63 9022026.50 9022026.63 99 105 184 328 1 400 2 600 80 9022025.80 9022026.80 117 740 5 700 100 9022025.100 9022026.100 121 1 300 10 200 125 9022025.125 9022026.125 142 2 500 19 200 150 9022025.150 9022026.150 153 4 000 31 200 Weight [kg/1] * (L/R=15ms) 1.78 Accessories Units per Package M Microswitches 1 278-280 M8 Contact Bolt Maximum Torque 15N m 11.1lb ft 133lb in 9022025 9022026 268
URDC URDC Size SQB-DC0 Rated Voltage [Un] 3600V DC Rated Breaking Test Class Capacity Voltage ar IEC 60 077-5 30kA 4200V DC UIC 550 Coefficients for Heavy Duty Applications a A2 B1 B2 Cf3 130 0.55 1.25 0.6 0.8 Time-Current Characteristics Virtual Pre-arcing time - [s] R.M.S. Prospective Current [A] 269
URDC URDC Rated Voltage [Un] 3600V DC Rated Breaking Test Capacity Voltage 30kA 4200V DC Class ar IEC 60 077-5 UIC 550 Size SQB-DC2 & SQB-DC2-2 Rated Current I n [A] 100 125 160 200 250 280 315 Without Indicator Article Number With Microswitch Adapter Article Number Size SQB-DC2 Power Loss Pre-arcing I 2 t* @ 4200V DC 9020025.100 9020026.100 75 2 300 19 000 9020025.125 9020026.125 90 4 000 33 500 9020025.160 9020026.160 120 6 600 55 300 9020025.200 9020026.200 145 11 800 98 000 9020025.250 9020026.250 165 21 000 175 000 9020025.280 9020026.850 205 27 000 221 000 9020025.315 9020026.315 220 33 000 273 000 Weight [kg/1] * (L/R=15ms) 3.54 Accessories M8 Contact Bolt Units per Package M Microswitches Maximum Torque 1 278-280 15N m 11.1lb ft 133lb in I 2 t [W] [A 2 s] Total [A 2 s] 9020025 9020026 270
URDC URDC Rated Voltage [Un] 3600V DC Rated Breaking Test Capacity Voltage 30kA 4200V DC Class ar IEC 60 077-5 UIC 550 SizeeSQB-DC2 & SQB-DC2-2 Rated Current I n [A] 400 500 630 Without Indicator Article Number With Microswitch Adapter Article Number 9021025.400 9021026.400 9021025.500 9021026.500 9021025.630 9021026.630 Weight [kg/1] 7.08 Units per Package 1 Size SQB-DC2-2 Accessories M Microswitches 278-280 Power Pre-arcing Loss I 2 t [W] [A 2 s] 305 47 200 348 84 000 465 132 000 M8 Contact Bolt Maximum Torque 15N m 11.1lb ft 133lb in Total I 2 t* @ 4200V DC [A 2 s] 392 000 700 000 1 092 000 * (L/R=15ms) 9021025 9021026 271
URDC URDC Rated Voltage [Un] 3600V DC Rated Breaking Test Capacity Voltage 30kA 4200V DC Class ar IEC 60 077-5 UIC 550 Size SQB-DC2 & SQB-DC0-2 Coefficients for Heavy Duty Applications a A2 B1 B2 Cf3 130 0.55 1.25 0.6 0.8 Time-Current Characteristics Virtual Pre-arcing time - [s] R.M.S. Prospective Current [A] 272
URDC URDC Rated Voltage Rated Breaking Test Class [Un] Capacity Voltage gr UL 248-13 600V DC 30kA (L/R=5ms) 600V DC (UL) gpv IEC 60 269-6 E180276 600V DC (IEC) Size 10x38mm Rated Without indicator Without indicator Without indicator Power Pre-arcing Total Current PCB 50.6mm Loss I 2 t I 2 t* I n Mounting @600V DC [A] Article Number UL Article Number UL Article Number UL [W] [A 2 s] [A 2 s] 1 5022526.1 5022626.1 5022726.1 0.8 0.33 2 5022526.2 5022626.2 5022726.2 1.2 3 3 5022526.3 5022626.3 5022726.3 1.6 12 4 5022526.4 5022626.4 5022726.4 1.8 10 5 5022526.5 5022626.5 5022726.5 2.0 20 6 5022526.6 5022626.6 5022726.6 2.5 45 8 5022526.8 5022626.8 5022726.8 1.5 3 10 5022526.10 5022626.10 5022726.10 1.8 5 12 5022526.20 5022626.20 5022726.20 2.3 9 15 5022526.15 5022626.15 5022726.15 2.3 20 16 5022526.16 5022626.16 5022726.16 2.6 20 20 5022526.20 5022626.20 5022726.20 3.1 29 25 5022526.25 5022626.25 5022726.25 3.6 66 30 5022526.30 5022626.30 5022726.30 5.3 82 Power loss limit of fuse base has to be considered 38 38 10.3 0.8 10.3 10.3 16.4 6.0 38 5022726 38.8 5022526 0.8 5.1 1.2 3.8 4.0 58.8 50.6 6.4 6.0 10.4 Time-Current Characteristics 5022626 Virtual Pre-arcing time - [s] Coefficients for Heavy Duty Applications a A2 B1 B2 Cf3 130 0.9 1.25 0.5 0.8 R.M.S. Prospective Current [A] Fuse Modules - DIN Rail Mounting w/lockout Clip Page Fuse Clips Page 5105805.1DC 1-Pole 282 6100101.2 Fuse Clips Screw mounting 5105805.1LDC 1-Pole w/neon lamp indicator 6301701 Clamping plate for 6100101.2 287 5105805.2DC 2-Pole 750V/50A 5805806 Fuse Clips PCB mounting 5105805.2LDC 2-Pole w/neon lamp indicator E186970 273
URDC URDC Rated Voltage [Un] 1000V AC Rated Breaking Test Capacity Voltage 100kA 1000V AC Class ar IEC 60 269-40 VDE 0636 Part 40 Size NH3 Rated With Power Pre-arcing Total Current Top Indicator Loss I 2 t I 2 t I n @ 1000V AC [A] Article Number [W] [A 2 s] [A 2 s] 100 2040704.100 28 2 100 5 800 125 2040704.125 34 2 900 8 900 160 2040704.160 36 4 100 12 800 200 2040704.200 41 5 600 18 000 224 2040704.224 45 6 700 21 500 250 2040704.250 49 10 000 31 000 315 2040704.315 73 34 000 97 000 355 2040704.355 77 51 000 152 000 400 2040704.400 79 60 000 180 000 450 2040704.450 82 74 000 220 000 500 2040704.500 87 125 000 370 000 Weight [kg/1] 1.01 Units per Package 1 2040704 Accessories Microswitch (Red Hammer) 2800202 Standard Level 2800204 Low Level Page 278 Page 274
URDC URDC Rated Voltage Rated Breaking Test Class [Un] Capacity Voltage ar IEC 60 269-40 1000V AC 100kA 1000V AC VDE 0636 Part 40 Size NH3 Coefficients for Heavy Duty Applications a A2 B1 B2 Cf3 130 0.55 1.3 0.6 0.8 Cut-Off current Characteristics Time-Current Characteristics Cutoff Current - Peak [ka] Virtual Pre-arcing time - [s] Prospective Short Circuit Current [ka] (Symmetrical r.m.s.) R.M.S. Prospective Current [A] 275
URDC URDC Rated Voltage [Un] 2000V AC Rated Breaking Test Capacity Voltage 100kA 2000V AC Class ar IEC 60 269-40 VDE 0636 Part 40 Size NH3 Rated Current I n [A] 200 224 250 300 315 355 400 450 With Power Pre-arcing Total Top Indicator Loss I 2 t I 2 t @ 2000V AC Article Number [W] [A 2 s] [A 2 s] 2040404.200 78 21 000 60 000 2040404.224 85 27 000 77 000 2040404.250 103 33 000 95 000 2040404.300 115 53 000 151 000 2040404.315 121 62 000 172 000 2040404.355 135 94 000 280 000 2040404.400 145 130 000 410 000 2040404.450 153 159 000 520 000 Weight [kg/1] 1.7 Units per Package 1 2040404 Accessories Microswitch (Red Hammer) 2800202 2800204 Standard Level Low Level Page 278 Page 276
URDC URDC Rated Voltage [Un] 2000V AC Rated Breaking Test Capacity Voltage 100kA 2000V AC Class ar IEC 60 269-40 VDE 0636 Part 40 Size NH3 Coefficients for Heavy Duty Applications a A2 B1 B2 Cf3 130 0.65 1.25 0.6 0.8 Cut-Off current Characteristics Time-Current Characteristics Cutoff Current - Peak [ka] Virtual Pre-arcing time - [s] Prospective Short Circuit Current [ka] (Symmetrical r.m.s.) R.M.S. Prospective Current [A] 277
URDC URDC Accessories Microswitch Article Number 2800201 2800202 Insulating Voltage [V] Change Over Circuits 1 GL Microswitch Standard Level Interrupt Rating AC DC [V] [A] [V] [A] 5(resistive) 33 3(resistive) 250 3(inductive) 26 3(inductive L/R =10ms) Low Level Interrupt Rating Minimum Maximum 2800203 5V AC 30V AC 1 1mA(resistive) 0.3A 2800204 5V DC 30V DC Weight [kg / 1] 0.02 Units per Package 10 2800201 / 2800203 (Black Hammer) 2800202 / 2800204 (Red Hammer) Article Number 2800104 Insulating Voltage [V] M Microswitch Standard Level Change Over Interrupt Rating (Resistive Load) Circuits Minimum Load Requirement AC/DC Maximum AC / DC [V] resistive [ma] [V] [A] 1 30 10 250 10 Low Level 2801104 1 5 1 250V AC 35V DC 10 1 2800104 Standard 2801104 Low Level E186970 278
URDC URDC Accessories Microswitch B Microswitch Standard Level Insulating Change Over Interrupt Rating (Resistive Load) Voltage Circuits Minimum Load Requirement AC/DC Maximum AC / DC 2800310 2800311 1250 2200 1 1 2800312 5500 1 Weight [kg / 1] 5V 50mA 0.025 250V AC 12A AC 30V 10mA Units per Package 35V DC 10A DC 10 100V 5mA 2800320 1250 2 2800321 2200 2 2800322 5500 2 Weight [kg / 1] 0.032 Units per Package 10 Low Level Insulating Change Over Interrupt Rating (Resistive Load) Voltage Circuits Minimum Load Requirement AC/DC Maximum AC / DC 2800410 1250 1 2800411 2200 1 DO NOT USE BELOW 2800412 5500 1 Weight [kg / 1] 0.025 5V 1mA 250V AC 10A AC Units per Package 35V DC 1A DC 10 2800420 1250 2 2800421 2200 2 2800422 5500 2 Weight [kg / 1] 0.032 Units per Package 10 279
URDC URDC Accessories Microswitch B - Microswitch 2800310 2800410 2800311 2800411 2800312 2800412 2800320 2800420 2800321 2800421 2800322 2800422 Maximum Torque - 10N m IEC 90947-3; AC20B, DC020B 9108001 280
URDC URDC Rated Voltage 690V AC / 1000V DC Accessories Fuse Bases IEC 60269-2 Fuse Fuse Base Rated Rated Power Weight Size Current Acceptance 1 Article No. [A] [W] [kg/1] 1 - Pole 2155601 250 32 0.72 Units External Wall Partition Wall Insulating per Contact Covers Package Article No. Article No. Article No. 1 2500301 2100301.26 2500301 URDC E341490 2155601 10x38mm DIN Rail Mounting Rated voltage; 1000V DC, UL / IEC Rated current; 30A UL, 32A IEC Power acceptance; 4W 2100301.26 Rated Voltage 25 003 01 1000V DC - UL / IEC UL 4248-1 & 18 UL 486E IEC 60269-1 & 2 CSA 22.2 5106305 DC 10mm x38mm Fuse Module IEC 60947-1 & 2 Article No. Description 5106305.1DC No indicator 1-Pole 5106305.1LDC w/ Neon lamp indicator Conductor solid; 0.75mm 2-16mm 2, 18AWG - 8AWG Conductor stranded; 0.75mm 2-16mm 2, 18AWG - 8AWG Maximum torque; 2.5N m - 3N m, 18lb in - 22lb in Utilization Category AC-21B 690V - DC-20B 1000V Pollution degree; 3 Rated insulation voltage; U imp = 6kV Degree of protection; IP-20* Construction, body & handle; Thermoplastic Polyester Contacts; copper-silver plated Flammability "UL 94"; V0 Operating temperature range; -50⁰C to +85⁰C** Rating of light indicator; 350V DC - 1000V DC *Depends on connection and mounting parts; Contact SIBA for stranded wire 6mm 2 or solid wire 10mm 2 ** Avoid handling of lever during installation or maitenance below -20⁰C Important: DO NOT OPEN UNDER LOAD! 5106305.2DC 5106305.2LDC 2-Pole No indicator w/ Neon lamp indicator Fuse module current derating for adjacent pole with direct contatact Number of Poles De-rating factor 1-3 1.0XI n 4-6 0.8XI n 7-9 0.7XI n 10 0.6XI n E341490 281
URDC URDC Rated Voltage 690V AC - 1000V DC - IEC w/lamp indicator Accessories UL 4248-1 CSA 22.2 Fuse Modules IEC 60269-1 & 2 IEC 60947-1 & 2 5105805 DC Series for 14x51mm 1000V Fuse Links 14x51mm DIN Rail Mounting Article No. Description Rated voltage; IEC 690V AC, 1000V C 5105805.1DC No indicator Rated current; 50A UL, 50A IEC 5105805.1LDC 1-Pole w/ Neon lamp indicator Power acceptance; 6W 5105805.1SDC w/ Microswitch Conductor solid; 1.5mm 2-35mm 2 5105805.2DC No indicator 2-Pole Conductor stranded; 1.5mm 2-25mm 2 5105805.2LDC w/ Neon lamp indicator Torque rating; 2.5N m - 3N m, 18lb in - 22lb in Fuse module current derating for adjacent pole with direct contatact Utilization Category AC-21B 690V - DC-20B 1000V Number of Poles De-rating factor Pollution degree; 3 1-4 1.0XI n Rated insulation voltage; U imp = 8kV 5-6 0.8XI n Degree of protection; IP-20* 7-9 0.7XI n Construction, body & handle; Thermoplastic Polyester 10 0.6XI n Contacts; copper-silver plated Flammability "UL 94"; V0 Operating temperature range; -40⁰C to +85⁰C** Rating of light indicator; 350V DC - 1000V DC *Depends on connection and mounting parts; Contact SIBA for stranded wire 10mm 2 or solid wire 10mm 2 ** Avoid handling of lever during installation or maitenance below -20⁰C Important: DO NOT OPEN UNDER LOAD! 282
URDC URDC E186970 Rated Voltage 750V AC/DC - UL 690V AC/ - 750V DC - IEC w/lamp indicator Accessories UL 4248-1 CSA 22.2 Fuse Modules IEC 60269-1 & 2 VDE 0636-1 & 2 IEC 60947-1 & 2 VDE 0660-100 & 107 5106305 DC Series for 10x38mm 750V AC/DC Fuse Links Article No. 10x38mm DIN Rail Mounting Rated voltage; 750V AC/DC UL(rec), 690V AC - 750V DC IEC 5106305.1 No indicator 1-Pole Rated current; 30A - UL, 32A - IEC 5106305.L w/ Neon lamp indicator Power acceptance; 4W 5106305.2 No Indicator 2-Pole Conductor solid; 0.75mm 2-16mm 2, 18AWG - 8AWG, 5106305.2L w/ Neon lamp indicator Conductor stranded; 0.75mm 2-16mm 2, 18AWG - 8AWG 5106305.3 No Indicator 3-Pole Torque rating; 2.5N m, 18lb in 5106305.3L w/ Neon lamp indicator Utilization Category AC-21B 690V - DC-20B 750V 5106305.4 No Indicator 4-Pole Pollution degree; 3 5106305.4L w/ Neon lamp indicator Rated insulation voltage; U imp = 6kV Fuse module current derating for adjacent pole with direct contatact Degree of protection; IP-20* Number of Poles De-rating factor Construction, body & handle; Thermoplastic Polyester 1-4 1.0XI n Contacts; copper-silver plated Flammability "UL 94"; V0 Operating temperature range; -50⁰C to +85⁰C** Rating of light indicator; 120V AC/DC - 690V AC/DC *Depends on connection and mounting parts; Contact SIBA for stranded wire 6mm 2 or solid wire 10mm 2 ** Avoid handling of lever during installation or maitenance below -20⁰C Important: DO NOT OPEN UNDER LOAD! 5-6 0.8XI n 7-9 0.7XI n 10 0.6XI n E186970 750V/30A 283
URDC URDC Rated Voltage 1000VAC Rated Current 400A Power Acceptance 34W E186970 Size NH000/00 DIN 80 Accessories Fuse Bases 2118901 289 08 Dimensions [in / mm] 21 189 01 21 189 08 21 189 11 A 4.96 / 126 4.96 / 126 4.96 / 126 B 1.57 / 40 B 1 1.57 / 40 B 2 1.34 / 34 C 0.50 / 13 0.50 / 13 0.50 / 13 D 0.75 / 19 0.75 / 19 0.75 / 19 E 3.15 / 80 3.15 / 80 3.15 / 80 F 0.12 / 3 0.12 / 3 0.12 / 3 G 1.73 / 44 1.81 / 46 G 1 2.00 / 51 G 2 1.73 / 44 H 4.40 / 112 2.91 / 74 4.40 / 112 I 0.26 / 6.5 0.26 / 6.5 0.26 / 6.5 J 0.60 / 15.5 0.60 / 15.5 0.60 / 15.5 K 0.63 / 16 0.63 / 16 0.63 / 16 L max 5.75 / 146 5.75 / 146 L 1 5.75 / 146 L 2 6.50 / 165 M N M8 M8 M8 0.98 / 25 0.98 / 25 0.98 / 25 Max M8 nut torque 12N m 8.8lb ft 106lb in Max base mounting torque 4N m 3lb ft 35lb in 2118911 284
URDC URDC Accessories Fuse Bases 0 36mmx190mm 91090 1 20mmx190mm 9109601 2000V DC - 36mmx250mm 285
URDC URDC Accessories Fuse Clips Fuse Clips for 10mm Diameter Contacts 5806316 Dimensions [ in / mm] 5806316 5806319 0.43 / 11.0 A 0.43 / 11.0 0.47 / 12.0 B 0.47 / 12.0 0.71 / 18.0 C 0.71 / 18.0 0.14 / 3.6 D 0.14 / 3.6 0.08 / 2.0 E E 1 0.08 / 2.0 E 2 0.12 / 3.0 0.03 / 0.65 F 0.03 / 0.65 0.43 / 11.0 G 0.43 / 11.0 0.18 / 4.45 H 0.18 / 4.45 0.06 / 1.5 I 0.06 / 1.5 0.22 / 5.5 J 0.22 / 5.5 0.45 / 11.5 L 0.45 / 11.5 5806319 5806317 Dimensions [ in / mm] 5806317 6301701 0.43 / 11.0 0.47 / 12.0 A B 0.39 / 10.0 0.35 / 9.0 0.71 / 18.0 C 0.08 / 2.0 0.17 / 4.2 D 0.17 / 4.2 E 0.03 / 0.65 F G H 0.06 / 1.5 I 0.22 / 5.5 J Dimensions [ in / mm] 6101701.3 A 0.83 / 21.0 B 0.24 / 6.0 C 0.08 / 2.0 D 1 / M5 D 2 / M4 E 0.61 / 15.5 F 0.43 / 11.0 G 0.22 / 5.5 6301701 6101701.3 286
URDC URDC Accessories Fuse Clips Fuse Clips for 14mm Diameter Contacts 6100101.2 Dimensions [ in / mm] 6100101.2 6301701 0.61 / 15.5 A 0.39 / 10.0 0.61 / 15.5 B 0.35 / 9.0 0.90 / 22.8 C 0.08 / 2.0 0.17 / 4.2 D 0.17 / 4.2 0.03 / 0.7 F 0.06 / 1.5 I 0.26 / 6.5 J 0.57 / 14.5 L 6301701 5805806 Dimensions [ in / mm] 5805806 0.63 / 16.0 A 0.47 / 12.0 B 0.61 / 15.5 C D E 0.14 / 3.5 E 1 0.20 / 5.0 E 2 0.03 / 0.70 F 0.42 / 10.7 G 0.17 / 4.2 H 0.04 / 1.0 I 0.12 / 3.0 K 0.33 / 8.5 L 6100201.3 Fuse Clips for 22mm Diameter Contacts Dimensions [ in / mm] 6100201.3 6300201 0.73 / 18.5 A 0.73 / 18.5 0.72 / 18.4 B 0.59 / 15.0 1.42 / 36.0 C 0.12 / 3.0 0.18 / 4.2 D / M4 0.31 / 8.0 E 0.31 / 8.0 0.05 / 1.2 F 0.31 / 8.0 G 0.31/ 8.0 0.08 / 2.0 I 0.16 / 4.0 J 0.16 / 4.0 0.98 / 25.0 L 6300201 287
URDC URDC Accessories Fuse Clips Fuse Clips for 22mm Diameter Contacts 5806006 Dimensions [ in / mm] 6100201.4 A 1.40 / 35.5 B 0.59 / 15.0 C 0.12 / 3.0 D 1 / M4 / M6 D 2 E 0.31 / 8.0 F 1 0.30 / 7.5 F 2 0.31 / 8.0 G 0.31 / 8.0 Dimensions [ in / mm] 5806006 0.67 / 17.0 A 0.79 / 20.0 B 0.91 / 23.0 C 0.08 / 2.0 D E 0.24 / 6.0 E 1 0.14 / 3.5 E 2 0.03 / 0.8 F 0.42 / 10.7 G 0.17 / 4.2 H 0.04 / 1.0 I 0.13 / 3.2 K 0.49 / 12.5 L 6100201.4 Fuse Clips for 27mm Diameter Contacts Dimensions [ in / mm] 6100401.3 0.73 / 18.5 A 6300201 0.73 / 18.5 0.91 / 23.2 1.79 / 45.5 B C 0.59 / 15.0 0.12 / 3.0 0.17 / 4.3 D / M4 0.31 / 8.0 E 0.31 / 8.0 0.05 / 1.2 F 0.31 / 8.0 G 0.31/ 8.0 0.08 / 2.0 I 0.16 / 4.0 J 0.16 / 4.0 6100401.3 1.14 / 29.0 L 6300201 288
URDC URDC Accessories Fuse Clips Fuse Clips for 36mm Diameter Contacts Dimensions [ in / mm] 9109401.3 9109401.4 1.38 / 35.0 A 2.48 / 63.0 0.98 / 25.0 B 0.79 / 20.0 2.17 / 55.0 C 0.24 / 6.0 0.33 / 8.5 D 1 0.33 / 8.5 0.20 / 5.1 D 2 0.20 / 5.1 0.06 / 1.5 F 0.49 / 12.5 G G 1 0.49 / 12.5 G 2 1.36 / 34.5 0.31 / 8.0 I 0.20 / 5.0 J 0.69 / 17.5 1.38 / 35.0 L 9109401.4 9109401.3 289
URE URE Fuses for Semiconductor Protection - European Standard Class: Voltage ratings: Current ratings: Standards: ar 240V AC to 700V AC 5 A to 900 A IEC 60269-4 BS 88-4 Features and Benefits Extremely High interrupting ratings 100kA Protection of Power Semiconductor according to IEC 60269-4 Complies with BS 88 Standard Class; ar, 5A - 900A according to IEC 60269-4 Fuse accessories available - Microswitches for fuses with striker. 290
URE Fuses for Applications Article Description Selection Guide 240V AC 5007606 8.4mmx27mm-38mm mounting 292 5005306 17.5mmx26mm-40mm mounting 294 Blown fuse indication - add on 5005406 35mmx31mm-59mm mounting 296 5007106 2X35mmx31mm-59mm mounting 298 Technical Data 292-293 294-295 296-297 298-299 690V AC 5007706 8.4mmx54mm-64mm mounting 5007306 17.5mmx48mm-63mm mounting Blown fuse indication - add on 5007406 35mmx52mm-80mm mounting 5007506 2X35mmx52mm-80mm mounting 000 DIN 85 2056120 No blown fuse indication 85mm mounting centers 2056122 W/fitting for microswitch 2056320 No blown fuse indication 2X85mm mounting centers 2056322 W/fitting for microswitch 000 BS 70 300 300-301 302 302-303 304 304-305 306 306-307 308 308-309 310 310-311 2055920 No blown fuse indication 2055921 70mm mounting centers Blown Fuse indication 312 312-313 2055922 W/fitting for microswitch Accessories 5805304 Clip Set for Indicator Fuse 5805307 Indicator Fuse 5805404 Clip Set for Indicator Fuse 5807307 Indicator Fuse 5805305.1 Indicator Fuse Microswitch 314 291
URE URE Rated Voltage Rated Breaking Test Class [Un] Capacity Voltage ar BS 88-4 240V AC 100kA 240V AC IEC 60 269-4 150V DC 30kA 150V DC VDE 0636 Part 40 Size 8.4mmx38mm - SLCT Rated Current I n [A] 5 6 10 12 16 20 Article Number 5007606.5 5007606.6 5007606.10 5007606.12 5007606.16 5007606.20 Weight [kg/1] 0.005 Units per Package 50 Power Loss [W] 1.5 1.7 3.3 2.0 2.4 3.3 Pre-arcing I 2 t [A 2 s] 1.7 2.9 4.2 8.0 19 25 Total I 2 t @ 240V AC [A 2 s] 9.5 18 24 41 92 110 A B C D E F G K L Dimensions in / mm 1.06 / 27 0.33 / 8.4 0.16 / 4 0.24 / 6 1.50 / 38 0.25 / 6.4 0.35 / 9 0.03 / 0.8 1.8 / 46 5007606 292
URE URE Rated Voltage Rated Breaking Test Class [Un] Capacity Voltage ar BS 88-4 240V AC 100kA 240V AC IEC 60 269-4 150V DC 30kA 150V DC VDE 0636 Part 40 Size 8.4mmx38mm -SLCT Coefficients for Heavy Duty Applications a A2 B1 B2 Cf3 130 0.55 1.25 0.6 0.8 Cut-Off current Characteristics Time-Current Characteristics Cut-Off Current - Peak [ka] Virtual Pre-arcing time - [s] Prospective Short Circuit Current [ka] (Symmetrical r.m.s.) E07606-60_1 R.M.S. Prospective Current [A] Arc voltage Reduction factor Reduction factor for diagram for I 2 t total power loss 700 1.2 1.0 600 1.0 0.8 UL K B K w VAC 500 0.8 0.6 400 0.6 0.4 300 0.4 0.2 200 50 100 200 300 UB V AC 0.2 50 100 200 300 UB V AC 0 0 0.2 0.4 0.6 0.8 1.0 IB I N 293
URE URE Rated Voltage Rated Breaking Test [Un] Capacity Voltage 240V AC 100kA 240V AC 150V DC 30kA 150V DC Size 17.5mmx40mm - SLET Rated Current I n [A] 25 32 35 40 50 63 75 80 100 125 160 180 Article Number 5005306.25 5005306.32 5005306.35 5005306.40 5005306.50 5005306.63 5005306.75 5005306.80 5005306.100 5005306.125 5005306.160 5005306.180 Weight [kg/1] 0.032 Units per Package 10 Class ar BS 88-4 IEC 60 269-4 VDE 0636 Part 40 Power Pre-arcing Total Loss I 2 t I 2 t @ 240V AC [W] [A 2 s] [A 2 s] 3.6 39 260 4.5 40 270 63 5.0 5.3 6.7 7.7 9.4 9.7 13 16.0 22.0 24.0 100 130 250 330 420 620 1 000 1 500 2 300 430 700 900 1 700 2 300 2 900 4 300 6 800 10 200 15 700 B A B C D E F G K L Dimensions in / mm 1.02 / 26 0.70 / 17.5 0.25 / 6.35 0.30 / 8 1.57 / 40 0.50 / 13 0.73 / 18.5 0.10 / 2.5 2.17 / 55 5005306 Accessories Article No. 5805304 Fuse Clips for Indicator 5805307 Fuse Indicator 5805305.1 Microswitch Description Page 314 294
URE URE Rated Voltage Rated Breaking Test [Un] Capacity Voltage 240V AC 100kA 240V AC 150V DC 30kA 150V DC Size 17.5mmx40mm - SLET Class ar BS 88-4 IEC 60 269-4 VDE 0636 Part 40 Coefficients for Heavy Duty Applications a A2 B1 B2 Cf3 130 0.6 1.25 0.6 0.8 Cut-Off current Characteristics Time-Current Characteristics Cut-Off Current - Peak [ka] Virtual Pre-arcing time - [s] Prospective Short Circuit Current [ka] (Symmetrical r.m.s.) R.M.S. Prospective Current [A] Arc voltage diagram E05306-60_1 Reduction factor for I 2 t total Reduction factor for power loss 700 1.2 1.0 600 1.0 0.8 UL K B K w VAC 500 0.8 0.6 400 0.6 0.4 300 0.4 0.2 200 50 100 200 300 UB V AC 0.2 50 100 200 300 UB V AC 0 0 0.2 0.4 0.6 0.8 1.0 IB I N 295
URE URE Rated Voltage Rated Breaking Test Class [Un] Capacity Voltage ar BS 88-4 240V AC 100kA 240V AC IEC 60 269-4 150V DC 30kA 150V DC VDE 0636 Part 40 Size 35mmx59mm - SLMT Rated Current I n [A] 160 200 250 315 355 400 450 Article Number 5005406.160 5005406.200 5005406.250 5005406.315 5005406.355 5005406.400 5005406.450 Weight [kg/1] 0.15 Units per Package 2 Power Pre-arcing Total Loss I 2 t I 2 t @ 240V AC [W] [A 2 s] [A 2 s] 23 1 300 8 000 27 2 500 15 300 34 28 000 36 48 000 38 40 46 4 600 7 800 13 000 18 500 27 000 76 000 113 000 163 000 A B C D E F G K L Dimensions in / mm 1.22 / 31 1.38 / 35 0.40 / 10.3 0.53 / 13.5 2.32 / 59 0.98 / 25 1.54 / 39 0.12 / 3 3.30 / 84 5005406 Accessories Article No. 5805404 Fuse Clips for Indicator 5805307 Fuse Indicator 5805305.1 Microswitch Description Page 314 296
URE URE Rated Voltage [Un] 240V AC 150V DC Size 35mmx59mm - SLMT Rated Breaking Test Capacity Voltage 100kA 240V AC 30kA 150V DC Class ar BS 88-4 IEC 60 269-4 VDE 0636 Tiel 40 Coefficients for Heavy Duty Applications a A2 B1 B2 Cf3 130 0.55 1.25 0.6 0.8 Cut-Off current Characteristics Time-Current Characteristics Cut-Off Current - Peak [ka] Virtual Pre-arcing time - [s] Prospective Short Circuit Current [ka] (Symmetrical r.m.s.) R.M.S. Prospective Current [A] E05406-60_1 Arc voltage Reduction factor diagram for I 2 t total Reduction factor for power loss 700 1.2 1.0 600 1.0 0.8 UL K B K w VAC 500 0.8 0.6 400 0.6 0.4 300 0.4 0.2 200 50 100 200 300 U V B AC 0.2 50 100 200 300 U V B AC 0 0 0.2 0.4 0.6 0.8 1.0 I I B N 297
URE URE Rated Voltage Rated Breaking Test Class [Un] Capacity Voltage ar BS 88-4 240V AC 100kA 240V AC IEC 60 269-4 150V DC 30kA 150V DC VDE 0636 Part 40 Size 2X35mmx59mm - SLMT Rated SLMMT Power Pre-arcing Current I n [A] 300 350 400 450 500 630 710 800 900 Article Number 5007106.300 5007106.350 5007106.400 5007106.450 5007106.500 5007106.630 5007106.710 5007106.800 5007106.900 Weight [kg/1] 0.29 Units per Package 1 Loss [W] 47 51 55 56 59 62 72 74 90 I 2 t [A 2 s] 5 300 8 200 10 000 19 000 34 000 50 000 70 000 106 000 150 000 Total I 2 t @ 240V AC [A 2 s] 32 000 50 000 61 000 116 000 205 000 305 000 427 000 647 000 915 000 A B C D E F G H K L Dimensions in / mm 1.22 / 31 1.38 / 35 0.40 / 10.3 0.53 / 13.5 2.32 / 59 0.98 / 25 1.65 / 42 3.07 / 78 0.12 / 3 3.30 / 84 5007106 Accessories Article No. 5805404 Fuse Clips for Indicator 5805307 5805305.1 Fuse Indicator Microswitch Description Page 314 298
URE URE Rated Voltage [Un] 240V AC 150V DC Size 2X35mmx59mm - SLMT SLMMT Rated Breaking Test Capacity Voltage 100kA 240V AC 30kA 150V DC Coefficients for Heavy Duty Applications a A2 B1 B2 Cf3 130 0.55 1.25 0.6 0.8 Class ar BS 88-4 IEC 60 269-4 VDE 0636 Part 40 Cut-Off current Characteristics Time-Current Characteristics Cut-Off Current - Peak [ka] Virtual Pre-arcing time - [s] Prospective Short Circuit Current [ka] (Symmetrical r.m.s.) E07106-60_1 R.M.S. Prospective Current [A] Arc voltage Reduction factor Reduction factor for diagram for I 2 t total power loss 700 1.2 1.0 600 1.0 0.8 UL V AC 500 K B 0.8 K w 0.6 400 0.6 0.4 300 0.4 0.2 200 50 100 200 300 U V B AC 0.2 50 100 200 300 U V B AC 0 0 0.2 0.4 0.6 0.8 1.0 I I B N 299
URE URE Rated Voltage [Un] 690V AC 450V DC Size 8.4mmx64mm - SCT Rated Current Rated Breaking Test Capacity Voltage 100kA 690V AC 30kA 450V DC Class ar BS 88-4 IEC 60 269-4 VDE 0636 Part 40 Power Loss Pre-arcing I 2 t Total I 2 t I n [A] 6 10 12 16 20 Article Number 5007706.6 5007706.10 5007706.12 5007706.16 5007706.20 Weight [kg/1] 0.008 Units per Package 50 [W] [A 2 s] 3.2 3 3.7 8 3.9 11 5.5 18 7.5 32 @ 690V AC [A 2 s] 20 53 77 120 215 B A B C D E F G K L Dimensions in / mm 2.11 / 53.5 0.33 / 8.4 0.16 / 4 0.24 / 6 2.53 / 64.3 0.25 / 6.4 0.35 / 9 0.03 / 0.8 2.87 / 73 5007706 300
URE URE Rated Voltage Rated Breaking Test Class [Un] Capacity Voltage ar BS 88-4 690V AC 100kA 690V AC IEC 60 269-4 450V DC 30kA 450V DC VDE 0636 Part 40 Size 8.4mmx64mm - SCT Coefficients for Heavy Duty Applications a A2 B1 B2 Cf3 130 0.6 1.25 0.6 0.8 Cut-Off current Characteristics Time-Current Characteristics Cut-Off Current - Peak [ka] Virtual Pre-arcing time - [s] Prospective Short Circuit Current [ka] (Symmetrical r.m.s.) R.M.S. Prospective Current [A] Arc voltage Reduction factor Reduction factor for diagram for I 2 t total power loss 1500 1.2 1.0 1300 1.0 0.8 U L V AC 1100 K B 0.8 K w 0.6 900 0.6 0.4 700 0.4 0.2 500 200 400 600 800 U V B AC 0.2 200 400 600 800 U V B AC 0 0 0.2 0.4 0.6 0.8 1.0 I I B N 301
URE URE Rated Voltage Rated Breaking Test Class [Un] Capacity Voltage ar BS 88-4 690V AC 100kA 690V AC IEC 60 269-4 450V DC VDE 0636 Part 40 Size 17.5mmx63mm - SFE Rated Current I n [A] 25 32 35 40 50 63 80 100 Article Number 5007306.25 5007306.32 5007306.35 5007306.40 5007306.50 5007306.63 5007306.80 5007306.100 Weight [kg/1] 0.042 Units per Package 10 Power Loss [W] 7 8 9.5 10 12 15 19 23 Pre-arcing Total I 2 t I 2 t @ 690V AC [A 2 s] [A 2 s] 25 110 60 260 63 280 80 330 190 780 420 1 900 520 2 500 740 3 100 A B C D E F G K L Dimensions in / mm 1.90 / 48 0.70 / 17.5 0.25 / 6.35 0.30 / 8 2.48 / 63 0.50 / 13 0.73 / 18.5 0.10 / 2.5 3.03 / 77 5007306 Accessories 5805304 5807307 5805305.1 Article No. Fuse Clips for Indicator Fuse Indicator Microswitch Description Page 314 302
URE URE Rated Voltage [Un] 690V AC Size 17.5mmx63mm - SFE Rated Breaking Test Class Capacity Voltage ar BS 88-4 100kA 690V AC IEC 60 269-4 450V DC VDE 0636 Part 40 Coefficients for Heavy Duty Applications a A2 B1 B2 Cf3 130 0.6 1.25 0.6 0.8 Cut-Off current Characteristics Time-Current Characteristics Cut-Off Current - Peak [ka] Virtual Pre-arcing time - [s] Prospective Short Circuit Current [ka] (Symmetrical r.m.s.) E07306-60_1 R.M.S. Prospective Current [A] Arc voltage Reduction factor Reduction factor for diagram for I 2 t total power loss 1500 1.2 1.0 1300 1.0 0.8 U L V AC 1100 K B 0.8 K w 0.6 900 0.6 0.4 700 0.4 0.2 500 200 400 600 800 U V B AC 0.2 200 400 600 800 U V B AC 0 0 0.2 0.4 0.6 0.8 1.0 I I B N 303
URE URE Rated Voltage Rated Breaking Test Class [Un] Capacity Voltage ar BS 88-4 690V AC 100kA 690V AC IEC 60 269-4 450V DC 30kA 450V DC VDE 0636 Part 40 Size 35mmx80mm - SMT Rated Power Pre-arcing Current I n [A] 100 125 160 200 250 315 355 Article Number 5007406.100 5007406.125 5007406.160 5007406.200 5007406.250 5007406.315 5007406.355 Weight [kg/1] 0.19 Units per Package 3 Loss [W] 22 29 30 35 40 46 56 I 2 t [A 2 s] 1 000 1 700 4 600 9 000 18 000 27 000 41 000 Total I 2 t @ 690V AC [A 2 s] 6 500 11 000 30 000 58 000 116 000 173 000 262 000 A B C D E F G K L Dimensions in / mm 2.05 / 52 1.38 / 35 0.40 / 10.3 0.53 / 13.5 3.15 / 80 0.98 / 25 1.54 / 39 0.12 / 3 4.13 / 105 5007406 Accessories Article No. 5805404 Fuse Clips for Indicator 5807307 Fuse Indicator 5805305.1 Microswitch Description Page 314 304
URE URE Rated Voltage [Un] 690V AC 450V DC Size 35mmx80mm - SMT Rated Breaking Test Capacity Voltage 100kA 690V AC 30kA 450V DC Class ar BS 88-4 IEC 60 269-4 VDE 0636 Tiel 40 Coefficients for Heavy Duty Applications a A2 B1 B2 Cf3 130 0.55 1.25 0.6 0.8 Cut-Off current Characteristics Time-Current Characteristics Cut-Off Current - Peak [ka] Virtual Pre-arcing time - [s] Prospective Short Circuit Current [ka] (Symmetrical r.m.s.) R.M.S. Prospective Current [A] E07406-60_1 Arc voltage Reduction factor diagram for I 2 t total Reduction factor for power loss 1500 1.2 1.0 1300 1.0 0.8 U L V AC 1100 K B 0.8 K w 0.6 900 0.6 0.4 700 0.4 0.2 500 200 400 600 800 U V B AC 0.2 200 400 600 800 U V B AC 0 0 0.2 0.4 0.6 0.8 1.0 I I B N 305
URE URE [Un] Capacity Voltage ar BS 88-4 690V AC 100kA 690V AC IEC 60 269-4 450V DC 30kA 450V DC VDE 0636 Part 40 Size 2X35mmx80mm - SMT Rated Current I n [A] 315 355 400 450 500 630 710 Article Number 5007506.315 5007506.355 5007506.400 5007506.450 5007506.500 5007506.630 5007506.710 Weight [kg/1] 0.37 Units per Package 1 Power Loss [W] 48 55 58 63 68 87 104 Pre-arcing I 2 t [A 2 s] 18 500 22 300 36 100 52 300 70 100 106 000 163 000 Total I 2 t @ 690V AC [A 2 s] 119 000 143 000 231 000 335 000 449 000 679 000 1 044 000 A B C D E F G H K L Dimensions in / mm 2.05 / 52 1.38 / 35 0.40 / 10.3 0.53 / 13.5 3.15 / 80 0.98 / 25 1.65 / 42 3.07 / 78 0.24 / 6 4.12 / 105 5007506 Accessories Article No. 5805407 Fuse Clips for Indicator 5807307 Fuse Indicator 5805305.1 Microswitch Description Page 314 306
URE URE Rated Voltage [Un] 690V AC 450V DC Size 2X35mmx80mm - SMMT Rated Breaking Test Class Capacity Voltage ar BS 88-4 100kA 690V AC IEC 60 269-4 30kA 450V DC VDE 0636 Part 40 Coefficients for Heavy Duty Applications a A2 B1 B2 Cf3 130 0.6 1.25 0.6 0.8 Cut-Off current Characteristics Time-Current Characteristics Cut-Off Current - Peak [ka] Virtual Pre-arcing time - [s] Prospective Short Circuit Current [ka] (Symmetrical r.m.s.) E07506-60_1 R.M.S. Prospective Current [A] Arc voltage Reduction factor Reduction factor for diagram for I 2 t total power loss 1500 1.2 1.0 1300 1.0 0.8 U L V AC 1100 K B 0.8 K w 0.6 900 0.6 0.4 700 0.4 0.2 500 200 400 600 800 U V B AC 0.2 200 400 600 800 U V B AC 0 0 0.2 0.4 0.6 0.8 1.0 I I B N 307
URE URE Size Size NH000 DIN 85 Rated Current I n [A] 110 125 150 160 180 200 250 280 300 315 350 400 Without Indicator Article Number 2056120.110 2056120.125 2056120.150 2056120.160 2056120.180 2056120.200 Rated Voltage [Un] 690V AC With Indicator and Fitting for Microswitch Article Number 2056122.110 2056122.125 2056122.150 2056122.160 2056122.180 2056122.200 2056120.250 2056122.250 2056120.280 2056122.280 2056120.300 2056122.300 2056120.315 2056122.315 2056120.350* 2056122.350 2056120.400* 2056122.400 Weight (kg per 1) 0.19 0.19 Units per Package 6 6 Rated Breaking Test Capacity Voltage 120kA 690V AC *500V AC Class ar BS 88-4 IEC 60 269-4 VDE 0636 Part 40 Power Loss [W] 21 22 2 000 24 3 300 27 3 700 30 5 400 31 11 200 32 14 900 44 17 000 18 000 48 50 56 70 Pre-arcing I 2 t [A 2 s] 1 350 19 200 23 000 32 100 Total I 2 t @ 690V AC [A 2 s] 6 000 8 900 14 000 16 000 23 000 47 000 63 000 70 000 73 000 77 000 76 000 101 000 Dimensions in / mm 0.08 / 2 0.35 / 9 0.47 / 12 0.93 / 23.5 1.26 / 32 1.42 / 36 2.13 / 54 3.35 / 85 4.33 /110 1.50 / 38 2.01 / 51 2056120 2056122 Accessories Article No. Description Page 308
URE URE Size NH000 DIN 85 Rated Voltage [Un] 690V AC Rated Breaking Test Capacity Voltage 120kA 690V AC Class ar BS 88-4 IEC 60 269-4 VDE 0636 Part 40 Coefficients for Heavy Duty Applications a A2 B1 B2 Cf3 130 0.6 1.25 0.6 0.8 Cut-Off current Characteristics Time-Current Characteristics Cut-Off Current - Peak [ka] Virtual Pre-arcing time - [s] Prospective Short Circuit Current [ka] (Symmetrical r.m.s.) R.M.S. Prospective Current [A] 1500 N56120-60_1 Arc voltage Reduction factor Reduction factor for diagram for I 2 t total power loss 1.2 1.0 1300 1.0 0.8 UL K B K w VAC 1100 0.8 0.6 900 0.6 0.4 700 0.4 0.2 500 200 400 600 800 UB VAC 0.2 200 400 600 800 UB VAC 0 0 0.2 0.4 0.6 0.8 1.0 IB IN 309
URE URE Size 2XNH000 DIN 85 Rated Rated Voltage Rated Breaking Test [Un] Capacity Voltage 690V AC 120kA 690V AC Without Indicator With Indicator and Fitting for Microswitch Class ar BS 88-4 IEC 60 269-4 VDE 0636 Part 40 Power Loss Current I n [A] Article Number Article Number [W] 400 2056320.400 2056322.400 65 450 2056320.450 2056322.450 68 500 2056320.500 2056322.500 69 630 2056320.630 2056322.630 105 700 2056320.700* 2056322.700 118 800 2056320.800* 2056320.800* 147 Weight (kg per 1) *500V AC 0.38 Units per Package 3 Pre-arcing I 2 t [A 2 s] 44 800 52 000 59 600 76 800 95 200 129 000 Total I 2 t @ 690V AC [A 2 s] 188 000 220 000 252 000 308 000 304 000 404 000 Dimensions in / mm 0.08 / 2 0.35 / 9 0.47 / 12 0.93 / 23.5 1.26 / 32 1.42 / 36 2.13 / 54 3.35 / 85 4.33 /110 1.50 / 38 2.01 / 51 2056320 2056322 Accessories Article No. Description Page 310
URE URE Rated Voltage Rated Breaking Test Class [Un] Capacity Voltage ar BS 88-4 690V AC 120kA 690V AC IEC 60 269-4 VDE 0636 Part 40 Size 2XNH000 DIN 85 Coefficients for Heavy Duty Applications a A2 B1 B2 Cf3 130 0.6 1.25 0.6 0.8 Cut-Off current Characteristics Time-Current Characteristics Cut-Off Current - Peak [ka] Virtual Pre-arcing time - [s] Prospective Short Circuit Current [ka] (Symmetrical r.m.s.) N56120-60_1 R.M.S. Prospective Current [A] Arc voltage Reduction factor Reduction factor for diagram for I 2 t total power loss 1500 1.2 1.0 1300 1.0 0.8 UL K B K w VAC 1100 0.8 0.6 900 0.6 0.4 700 0.4 0.2 500 200 400 600 800 UB VAC 0.2 200 400 600 800 UB VAC 0 0 0.2 0.4 0.6 0.8 1.0 IB IN 311
URE URE Rated Voltage [Un] 690V AC Rated Breaking Test Class Capacity Voltage ar BS 88-4 120kA 690V AC IEC 60 269-4 VDE 0636 Part 40 Size NH000 BS 70 Rated Current I n [A] 32 35 40 50 63 80 100 125 160 180 200 250 315 Without Indicator With Indicator Article Number Article Number 2055921.32 2055920.32 2055921.35 2055920.35 2055921.40 2055920.40 2055921.50 2055920.50 2055921.63 2055920.63 2055921.80 2055920.80 2055921.100 2055920.100 2055921.125 2055920.125 2055921.160 2055920.160 2055921.180 2055920.180 2055921.200 2055920.200 2055921.250 2055920.250 2055921.315 2055920.315 Weight (kg per 1) 0.17 Units per Package 6 With Indicator and Fitting for Microswitch Article Number 2055922.32 2055922.35 2055922.40 2055922.50 2055922.63 2055922.80 2055922.100 2055922.125 2055922.160 2055922.180 2055922.200 2055922.250 2055922.315 Power Pre-arcing Total Loss I 2 t I 2 t @ 690V AC [W] [A 2 s] [A 2 s] 8 52 290 9 68 360 10 90 500 12 140 770 14 250 1 400 18 470 2 600 22 730 4 000 26 1 300 7 200 32 2 800 15 400 35 3 700 20 400 39 4 500 25 000 47 8 000 44 000 58 14 000 77 000 2055921 / 2055920 Dimensions in / mm 0.08 / 2 0.35 / 9 0.47 / 12 0.93 / 23.5 1.26 / 32 1.42 / 36 2.13 / 54 2.76 / 70 3.74 /95 1.50 / 38 2.01 / 51 2055922 Accessories Article No. Description Page 312
URE URE Rated Voltage Rated Breaking Test Class [Un] Capacity Voltage ar BS 88-4 690V AC 120kA 690V AC IEC 60 269-4 VDE 0636 Part 40 Size NH000 BS 70 Coefficients for Heavy Duty Applications a A2 B1 B2 Cf3 130 0.6 1.25 0.6 0.8 Cut-Off current Characteristics Time-Current Characteristics Cut-Off Current - Peak [ka] Virtual Pre-arcing time - [s] Prospective Short Circuit Current [ka] (Symmetrical r.m.s.) N28220-60_1 R.M.S. Prospective Current [A] Arc voltage Reduction factor Reduction factor for diagram for I 2 t total power loss 1500 1.2 1.0 UL VAC 1300 1100 K B 1.0 0.8 0.8 K w 0.6 900 0.6 0.4 700 0.4 0.2 500 200 400 600 800 U V B AC 0.2 200 400 600 800 U V B AC 0 0 0.2 0.4 0.6 0.8 1.0 I I B N 313
URE URE Accessories Indicators and Microswitches Article Number 5005306 5005406 5007306 5007406 5007106 5007506 I Clip Set for Indicator Fuse 5805304 5805404 5805304 5805404 5805404 5805404 II Indicator Fuse 5805307 5805307 5807307 5807307 5805307 5807307 III Microswitch 5805305.1 Dimensions [in/mm] H I J 0.98 / 25 0.87 / 22 0.94 / 24 1.60 / 41 1.46 / 37 1.54 / 39 0.98 / 25 0.87 / 22 0.94 / 24 1.60 / 41 1.46 / 37 1.54 / 39 0.98 / 25 0.87 / 22 0.94 / 24 1.60 / 41 1.46 / 37 1.54 / 39 314
URE UR 315
URL URL Fuses for Semiconductor Protection - European Standard Class: Voltage ratings: Current ratings: Standards: grl(gs) 400V AC to 700V AC 5 A to 800 A IEC 60269-4 DIN 43653 VDE 0636 Part 40 UL 248-13 Fuse type grl offers; U ltra R apid "gr" characteristic short circuit protection of semiconductors and "gg" characteristics for overload protection for cables Extremely High interrupting ratings up to 200kA Low I 2 t values Fuse accessories available - Microswitches for fuses with striker. 316
URL URL Fuses for Semiconductor Protection - European Standard Article Description 400V AC, D01,D02 & D03 1002734 1002834 1002934 D01 D02 D03 No blown fuse indication No blown fuse indication No blown fuse indication 500V AC, Dll & Dlll 1000534 Dll No blown fuse indication 1000734 Dlll No blown fuse indication 690V AC, NH000 2047734 Knife blade contacts With fitting for microswitch 2028234 DIN 80mm mounting centers With blown fuse indication 2055834 DIN 80mm mounting centers With fitting for microswitch 690V AC, NH00 2020934 Knife blade contacts With fitting for microswitch 2018934 DIN 80mm mounting centers With blown fuse indication 2041234 DIN 80mm mounting centers With fitting for microswitch 690V AC, NH1, SQB1 2021134 NH1, Knife blade contacts With fitting for microswitch 2025234 SQB1, M8, Flush contacts With fitting for microswitch 2027134 SQB1,DIN 110mm mounting centers With fitting for microswitch 690V AC, NH2, SQB2 2021234 NH2, Knife blade contacts With fitting for microswitch 2025334 SQB2, M10, Flush contacts With fitting for microswitch 2027434 SQB2,DIN 110mm mounting centers With fitting for microswitch 690V AC, NH3, SQB3 2021334 NH3, Knife blade contacts With fitting for microswitch 2025434 SQB3, M10, Flush contacts With fitting for microswitch 2027734 SQB3,DIN 110mm mounting centers With fitting for microswitch Selection Guide Technical Data 320 320-321 322 322-323 324 324-325 324 324-325 326 326-327 328 328-329 330 330-331 7006584 6003434 6006434 6007534 5012434 5012634 5012934 5014034 5014234 5014534 5014634 2118901 2118911 2118908 400V AC 6.3x32mm 600V AC 10x38mm 10x38mm, PCB mounting No blown fuse indication 10x38mm, Bolted contacts-50.6mm 690V AC - IEC / 700V AC - UL 14x51mm No blown fuse indication 14x51mm With blown fuse indication 14x51mm, Bolted contacts-63mm No blown fuse indication 22x58mm No blown fuse indication 22x58mm With striker 22x58mm, Bolted contacts-80mm No blown fuse indication 22x58mm, PCB mounting No blown fuse indication DIN 80 Fuse Base 332 332-333 334 334-335 336 336-337 338 338-339 340 317
URL Accessories Fuse Bases 2100101 NH000/00, 1-Pole 2100103 NH000/00, 3-Pole 2500101 External wall for 21 001 01 & 03 2500103.2 Partition wall for 21 001 01 2100301 NH1, 1-Pole 2100303 NH1, 3-Pole 2500301 External wall for 21 003 01 & 03 2500303.30 Partition wall for 21 003 01 2100301.26 Contact cover 2100401 NH2, 1-Pole 2100403 NH2, 1-Pole 2500401 External wall for 21 004 01 & 03 2100401.26 Contact cover 2100501 NH3, 1-Pole 2500501 External wall for 21 005 01 2100501.26 Contact cover 2132301 DIN 110mm 1-Pole, 630A 2132302 DIN 110mm 1-Pole, 1250A E186970 Fuse Modules 5106305 10x38mm 1-Pole 5106305.1L w/ Neon Lamp Indicator 5106305.2 10x38mm 2-Pole 5106305.2L w/ Neon Lamp Indicator 5106305.3 E189770 10x38mm 3-Pole 5106305.3L w/ Neon Lamp Indicator 5106305.4 10x38mm 4-Pole 5106305.4L w/ Neon Lamp Indicator 5105805.1 5105805.1L 14x51mm 1-Pole w/ Neon Lamp Indicator 5105805.1S w/ Microswitch 5105805.2 5105805.2L 14x51mm 2-Pole w/ Neon Lamp Indicator 5105805.2S E189770 w/ Microswitch 5105805.3 5105805.3L 14x51mm 3-Pole w/ Neon Lamp Indicator 5105805.3S w/ Microswitch 5106005.1 5106005.1L 22x58mm 1-Pole w/ Neon Lamp Indicator 5106005.1S w/ Microswitch 5106005.2 5106005.2L 22x58mm 2-Pole w/ Neon Lamp Indicator 5106005.2S E189770 w/ Microswitch 5106005.3 5106005.3L 22x58mm 3-Pole w/ Neon Lamp Indicator 5106005.3S w/ Microswitch Fuse Clips 199429 6.3mm, PCB mounting 204100 204101 6.3mm, Press on cap leads, 12.5A max 6.3mm, Press on cap leads, 20A max 341 342 343 344 345 346 346-347 346-347 348 318
URL 5806316 10mm, PCB mounting 5806319 10mm, PCB mounting 5806317 6301701 6101701.3 6100101.2 14mm, screw mounting 6301701 Clamping plate for 60 001 01.2 5805806 14mm, PCB mounting 6100201.3 22mm, screw mounting 6300201 Clamping plate for 60 002 01.3 6100201.4 Terminal link for 60 002 01.3 5806006 22mm, PCB mounting 2800203 2800202 2800204 10mm, screw mounting Clamping plate for 58 063 17 Terminal link for 58 063 17 2800201 GL microswitch, standard level GL microswitch, low level GL microswitch, standard level GL microswitch, low level 2800104 M microswitch, standard level 2801104 M microswitch, low level Accessories Fuse Clips Microswitches For SQB1, 2 & 3 348 349 350 351 319
URL URL Rated Voltage [Un] 400V AC Rated Breaking Test Capacity Voltage 120kA 400V AC Class grl (gs) IEC 60 269-4 VDE 0636 Part 40 Size D01, D02 & D03 Rated Current I n [A] 6 10 13 16 20 25 35 50 63 80 100 D01-E14 Article Number 1002734.6 1002734.10 1002734.13 1002734.16 D02-E18 D03-M30x2 Power Loss Article Number Article Number [W] 0.7 1.3 1.7 1.9 1002834.20 1.7 1002834.25 2.1 1002834.35 2.9 1002834.50 1002834.63 1002934.80 1002934.100 Weight [kg / 1] 0.006 0.014 0.042 Units per Package 50 10 3.9 5.1 5.5 6.5 Pre-arcing Total I 2 t I 2 t @ 400V AC [A 2 s] [A 2 s] 3 60 7.4 150 12 240 30 600 46 700 104 1 600 330 5 000 740 11 000 1 310 19 700 2 500 37 500 4 600 79 000 Dimensions [in / mm ] D01 D02 D03 1002734 1002834 1002934 D L 0.43 / 11 1.42 / 36 0.60 / 15.3 0.90 / 22.5 1.42 / 36 1.70 / 43 320
URL URL Rated Voltage Rated Breaking Test [Un] Capacity Voltage 400V AC 120kA 400V AC Class grl (gs) IEC 60 269-4 VDE 0636 Part 40 Size D01, D02 & D03 Coefficients for Heavy Duty Applications a A2 B1 B2 Cf3 130 0.8 1.25 0.6 0.8 Cut-Off current Characteristics Time-Current Characteristics Cutoff Current - Peak [ka] Virtual Pre-arcing time - [s] Prospective Short Circuit Current [ka] (Symmetrical r.m.s.) R.M.S. Prospective Current [A] R.M.S. Prospective Current [A] 321
URL URL Rated Voltage Rated Breaking Test Class [Un] Capacity Voltage grl 500V AC 120kA 500V AC (gs) IEC 60 269-4 VDE 0636 Part 40 Size Dll & Dlll Rated Current I n [A] 6 10 13 16 20 25 35 50 63 Power Pre-arcing Total Dll-E27 Dlll-E33 Loss I 2 t I 2 t @ 500V AC Article Number Article Number [W] [A 2 s] [A 2 s] 1000534.6 0.8 3.0 60 1000534.10 1.6 7.4 150 1000534.13 2.4 13 260 1000534.16 2.4 30 600 1000534.20 2.9 52 1 040 1000534.25 2.9 120 2 400 1000734.35 4.0 330 3 300 1000734.50 6.0 740 7 400 1000734.63 7.0 1 300 13 000 Weight [kg / 1] 0.031 0.051 Units per Package 25 Dimensions [in / mm ] Dll Dlll 1000534 1000734 D L 0.87 / 22 1.97 / 50 1.06 / 27 1.97 / 50 322
URL URL Rated Voltage [Un] 500V AC Rated Breaking Test Capacity Voltage 120kA 500V AC Class grl (gs) IEC 60 269-4 VDE 0636 Part 40 Size Dll & Dlll Coefficients for Heavy Duty Applications a A2 B1 B2 Cf3 130 0.8 1.25 0.6 0.8 Cut-Off current Characteristics Time-Current Characteristics Cutoff Current - Peak [ka] Virtual Pre-arcing time - [s] Prospective Short Circuit Current [ka] (Symmetrical r.m.s.) R.M.S. Prospective Current [A] R.M.S. Prospective Current [A] 323
URL URL Rated Voltage [Un] 690V AC - IEC E180276 700V AC - UL Size NH000, NH00 & DIN80 Rated Breaking Test Capacity Voltage 200kA 690V AC 20kA 220V DC Rated With top indicator With top indicator With top indicator Current and fitting for and fitting for I n microswitch UL UL microswitch UL [A] Article Number rec Article Number rec Article Number rec 16 2047734.16 2028234.16 2055834.16 20 2047734.20 2028234.20 2055834.20 25 2047734.25 2028234.25 2055834.25 32 2047734.32 2028234.32 2055834.32 40 2047734.40 2028234.40 2055834.40 50 2047734.50 2028234.50 2055834.50 63 2047734.63 2028234.63 2055834.63 80 2047734.80 2028234.80 2055834.80 100 2020934.100 2018934.100 2041234.100 125 2020934.125 2018934.125 2041234.125 160 2020934.160 2018934.160 2041234.160 200 2020934.200 2018934.200 2041234.200 Weight [kg / 1] 0.11 / 0.154 0.17 / 0.19 0.18 / 0.21 Units per Package 3 6 Class grl (gs) UL 248-13 IEC 60 269-4 VDE 0636 Part 40 Power Pre-arcing Total Loss I 2 t I 2 t @ 690V AC [W] [A 2 s] [A 2 s] 3.2 18 180 3.6 41 410 4.2 74 740 5.2 170 1 700 5.6 300 3 000 6.5 460 4 600 7.6 840 8 400 8.8 1 800 18 000 10.5 3 000 30 000 12.0 6 000 60 000 17 10 400 80 000 21 16 000 110 000 C E L C B A I F D 2028234 2018934 (DIN 80) C E L Max C B H G A Max F I D A B C D E F G H I L Dimensions [in / mm] NH000 NH00 NH000 NH00 NH000 NH00 2047734 2020934 2028234 2018934 2055834 2041234 2.17 / 55 2.17 / 55 2.17 / 55 0.60 / 15 0.80 / 20 1.13 / 28.8 0.80 / 20 1.13 / 28.8 1.85 / 47 1.85 / 47 0.33 / 8.8 0.40 / 10.3 0.33 / 8.8 0.40 / 10.3 0.80 / 20.5 1.16 / 29.5 0.80 / 20.5 1.16 / 29.5 0.80 / 20.5 1.16 / 29.5 1.60 / 40.5 1.80 / 46 3.08 / 78 3.08 / 78 0.24 / 6 0.24 / 6 0.24 / 6 1.38 / 35 - - 2.10 / 53 2.48 / 63 2.05 / 52 2.28 / 58 - - 2.76 / 70 3.15 / 80 0.28 / 7 0.50 / 13 1.54 / 39 1.85 / 47 1.54 / 39 1.85 / 47 3.07 / 78 3.94 /100 3.94 /100 3.94 /100 4.15 / 105 Accessories H G I 2055834 2041234 F D indicator B 2047734 2020934 C E A Max Fuse Bases 2100101 2118901 2118908 2118911 NH000/00 Fuse Base,1-Pole Fuse Base,1-Pole E 186970 Page 341 340 Microswitch For use with 2047734, 2020934 & 2055834 2800202 Standard Level (Red Hammer) For use with 2041234 2800201 Standard Level (Black Hammer) Page 351 324
URL URL Rated Voltage [Un] 690V AC - IEC E180276 700V AC - UL Size NH000, NH00 & DIN80 Rated Breaking Test Capacity Voltage 200kA 700V AC 20kA 220V DC Class grl (gs) UL 248-13 IEC 60 269-4 VDE 0636 Part 40 Coefficients for Heavy Duty Applications a A2 B1 B2 Cf3 130 1.0 1.25 0.6 0.8 Cut-Off current Characteristics Time-Current Characteristics Cut-Off Current - Peak [ka] Virtual Pre-arcing time - [s] Prospective Short Circuit Current [ka] (Symmetrical r.m.s.) R.M.S. Prospective Current [A] Arc voltage diagram N47734-60_1 Reduction factor Reduction factor for for I 2 t total power loss 1500 1.2 1.0 1300 1.0 0.8 U L V AC 1100 K B 0.8 K w 0.6 900 0.6 0.4 700 0.4 0.2 500 200 400 600 800 UB VAC 0.2 200 400 600 800 U V B AC 0 0 0.2 0.4 0.6 0.8 1.0 I I B N 325
URL URL Rated Voltage [Un] 690V AC - IEC E180276 700V AC - UL Size NH1 & SQB1 Rated With top indicator Current and fitting for I n microswitch [A] Article Number 63 2021134.63 80 2021134.80 100 2021134.100 125 2021134.125 160 2021134.160 200 2021134.200 250 2021134.250 315 2021134.315 UL rec With fitting for With fitting for microswitch microswitch SQB1 - M8 SQB1 - DIN 110 Article Number Article Number 2025234.63 2027134.63 2025234.80 2027134.80 2025234.100 2027134.100 2025234.125 2027134.125 2025234.160 2027134.160 2025234.200 2027134.200 2025234.250 2027134.250 2025234.315 2027134.315 Weight [kg / 1] 0.37 Units per Package 3 Rated Breaking Test Class Capacity Voltage grl 200kA 690V AC (gs) 32kA 500V DC (L/R=12ms) 2021134 A B C D E F G H I L Power Loss [W] 8.0 9.5 12.0 12.6 23 27 33 44 UL 248-13 IEC 60 269-4 VDE 0636 Part 40 Dimensions in / mm 20 211 34 2.95 / 75 0.80 / 20.3 2.56 / 65 1.65 / 42 2.03 / 51.5 0.24 / 6 1.57 / 40 2.52 / 64 0.55 / 14 5.30 / 135 Pre-arcing I 2 t [A 2 s] 840 1 800 3 000 6 000 7 400 15 000 30 000 43 000 Total I 2 t @ 690V AC [A 2 s] 5 300 11 300 19 000 38 000 47 000 95 000 190 000 271 000 2025234 2025234 1.87 / 47.5 0.94 / 24 2.00 / 51 2.60 / 66 3.50 / 89 2.00 / 51 / 8 A B C D E F G H L M 2027134 1.87 / 47.5 1.02 / 26 0.43 / 11 2.00 / 51 4.17 / 106 0.24 / 6 2.60 / 66 3.50 / 89 5.28 / 134 2027134 Accessories Fuse Bases 2100301 NH1 Fuse Base,1-Pole, 2100303 NH1Fuse Base,3-Pole 2132301 Fuse Base,1-Pole, 110mm, 630A Page 342 345 Microswitch For use with 2021134 2800202 Standard Level (Red Hammer) For use with 2025234 & 2027134 2800104 Standard Level Page 351 326
URL URL Rated Voltage [Un] 690V AC - IEC E180276 700V AC - UL Size NH1 & SQB1 Rated Breaking Test Class Capacity Voltage grl 200kA 690V AC (gs) 32kA 500V DC (L/R=12ms) Coefficients for Heavy Duty Applications a A2 B1 B2 Cf3 130 1.0 1.25 0.5 0.8 UL 248-13 IEC 60 269-4 VDE 0636 Part 40 Cut-Off current Characteristics Time-Current Characteristics Cut-Off Current - Peak [ka] Virtual Pre-arcing time - [s] Prospective Short Circuit Current [ka] (Symmetrical r.m.s.) N21134-60_1 R.M.S. Prospective Current [A] Arc voltage Reduction factor Reduction factor for diagram for I 2 t total power loss 1500 1.2 1.0 1300 1.0 0.8 U L V AC 1100 K B 0.8 K w 0.6 900 0.6 0.4 700 0.4 0.2 500 200 400 600 800 UB VAC 0.2 200 400 600 800 U V B AC 0 0 0.2 0.4 0.6 0.8 1.0 I I B N 327
URL URL Rated Voltage Rated Breaking Test Class [Un] Capacity Voltage grl 690V AC - IEC 200kA 690V AC (gs) E180276 700V AC - UL 32kA 500V DC (L/R=12ms) Size NH2 & SQB2 Units per Package 3 2021234 UL 248-13 IEC 60 269-4 VDE 0636 Part 40 Rated With top indicator With fitting for With fitting for Power Pre-arcing Total Current and fitting for microswitch microswitch Loss I 2 t I 2 t I n [A] microswitch Article Number UL rec SQB2 - M10 Article Number SQB2 - DIN 110 Article Number [W] [A 2 s] @ 690V AC [A 2 s] 160 2021234.160 2025334.160 2027434.160 23 7 400 47 000 200 2021234.200 2025334.200 2027434.200 27 15 000 95 000 250 2021234.250 2025334.250 2027434.250 30 30 000 190 000 315 2021234.315 2025334.315 2027434.315 40 43 000 271 000 350 400 450 500 2021234.350 2021234.400 2021234.450 2021234.500 2025334.350 2025334.400 2025334.450 2025334.500 2027434.350 2027434.400 2027434.450 2027434.500 43 48 50 63 58 000 85 000 107 000 170 000 310 000 442 000 560 000 880 000 Weight [kg / 1] 0.37 / 0.65 0.65 Dimensions [in / mm] 250A 2021234 >250A 2.95 / 75 0.80 / 20.3 2.56 / 65 1.65 / 42 2.03 / 51.5 0.24 / 6 1.90 / 48 2.83 / 72 0.55 / 14 5.90 / 150 A B C D E F G H I L 2.95 / 75 1.02 / 26 2.56 / 65 2.10 / 53 2.32 / 59 0.24 / 6 1.90 / 48 2.83 / 72 0.55 / 14 5.90 / 150 2025334 2025334 2027434 1.87 / 47.5 0.94 / 24 2.36 / 60 2.95 / 75 3.86 / 98 2.00 / 51 / 10 A B C D E F G H L M 1.87 / 47.5 1.02 / 26 0.43 / 11 2.36 / 60 4.17 / 106 0.24 / 6 2.95 / 75 3.86 / 98 5.28 / 134 2027434 Accessories Fuse Bases 2100401 NH2 Fuse Base,1-Pole 2100403 NH2 Fuse Base,3-Pole 2132301 Fuse Base,1-Pole, 110mm, 630A Page 343 345 Microswitch For use with 2021234 2800202 Standard Level (Red Hammer) For use with 2025334 & 2027434 2800104 Standard Level Page 351 328
URL URL Rated Voltage Rated Breaking Test Class [Un] Capacity Voltage grl UL 248-13 690V AC - IEC 200kA 690V AC (gs) IEC 60 269-4 E180276 700V AC - UL 32kA 500V DC (L/R=12ms) VDE 0636 Part 40 Size NH2 & SQB2 Coefficients for Heavy Duty Applications a A2 B1 B2 Cf3 130 1.0 1.3 0.6 0.8 Cut-Off current Characteristics Time-Current Characteristics Cut-Off Current - Peak [ka] Virtual Pre-arcing time - [s] Prospective Short Circuit Current [ka] (Symmetrical r.m.s.) N21234-60_1 R.M.S. Prospective Current [A] Arc voltage Reduction factor Reduction factor for diagram for I 2 t total power loss 1500 1.2 1.0 1300 1.0 0.8 U L V AC 1100 K B 0.8 K w 0.6 900 0.6 0.4 700 0.4 0.2 500 200 400 600 800 UB VAC 0.2 200 400 600 800 U V B AC 0 0 0.2 0.4 0.6 0.8 1.0 I I B N 329
URL URL Size NH3 & SQB3 Rated Voltage [Un] 690V AC - IEC 500V DC - IEC Rated Breaking Test Class Capacity Voltage grl 200kA 690V AC (gs) 32kA 500V DC (L/R=12ms) UL 248-13 IEC 60 269-4 VDE 0636 Part 40 Rated With top indicator With fitting for With fitting for Power Pre-arcing Total Current and fitting for microswitch microswitch Loss I 2 t I 2 t I n microswitch SQB3 - M12 SQB3 - DIN 110 @ 690V AC [A] Article Number Article Number Article Number [W] [A 2 s] [A 2 s] 315 2021334.315 2025434.315 2027734.315 38 43 000 271 000 350 2021334.350 2025434.350 2027734.350 42 58 000 310 000 400 2021334.400 2025434.400 2027734.400 46 85 000 442 000 450 2021334.450 2025434.450 2027734.450 48 107 000 560 000 500 2021334.500 2025434.500 2027734.500 55 170 000 880 000 560 2021334.560 2025434.560 2027734.560 58 190 000 1 100 000 630 2021334.630 2025434.630 2027734.630 64 280 000 1 400 000 710 2025434.710 2027734.710 69 420 000 1 900 000 800 2025434.800 2027734.800 74 620 000 2 500 000 Weight [kg / 1] 0.65 0.88 Dimensions Units per Package [in / mm] 3 315A 2021334 >315A 2021334 2.95 / 75 1.02 / 26 2.56 / 65 2.10 / 53 2.32 / 59 0.24 / 6 2.36 / 60 3.27 / 83 0.55 / 14 5.90 / 150 A B C D E F G H I L 2.95 / 75 1.26 / 26 2.56 / 65 2.56 / 65 2.90 / 73.5 0.24 / 6 2.36 / 60 3.40 / 86 0.67 / 17 5.90 / 150 2025434 2025434 2027734 1.93 / 49 1.10 / 28 2.87 / 73 3.46 / 88 4.37 / 111 2.00 / 51 / 12 A B C D E F G H L M 1.93 / 49 1.38 / 35 0.43 / 11 2.87 / 73 4.17 / 106 0.24 / 6 3.46 / 88 4.37 / 111 5.28 / 134 Accessories 2027734 Fuse Bases 2100501 NH3 Fuse Base,1-Pole 2132301 Fuse Base,1-Pole, 110mm, 630A 2132302 Fuse Base,1-Pole, 110mm, 1250A Page 344 345 Microswitch For use with 2021334 2800202 Standard Level (Red Hammer) For use with 2025434 & 2027734 2800104 Standard Level Page 351 330
URL URL Rated Voltage [Un] 690V AC - IEC 500V DC - IEC Size NH3 & SQB3 Rated Breaking Test Capacity Voltage 200kA 690V AC 32kA Class grl (gs) IEC 60 269-4 VDE 0636 Part 40 Coefficients for Heavy Duty Applications a A2 B1 B2 Cf3 130 1.0 1.25 0.5 0.8 Cut-Off current Characteristics Time-Current Characteristics Cut-Off Current - Peak [ka] Virtual Pre-arcing time - [s] Prospective Short Circuit Current [ka] (Symmetrical r.m.s.) R.M.S. Prospective Current [A] Arc voltage diagram N21334-60_1 Reduction factor Reduction factor for for I 2 t total power loss 1500 1.2 1.0 1300 1.0 0.8 U L V AC 1100 K B 0.8 K w 0.6 900 0.6 0.4 700 0.4 0.2 500 200 400 600 800 UB VAC 0.2 200 400 600 800 U V B AC 0 0 0.2 0.4 0.6 0.8 1.0 I I B N 331
URL URL E180276 Size 6.3mmx32mm Rated Current I n [A] 6.3 8 10 12.5 16 20 UL Article Number rec 7006584.6.3 7006584.8 7006584.10 7006584.12.5 7006584.16 7006584.20 Rated Voltage [Un] 400V AC Weight [kg / 1] 0.009 Units per Package 10 Rated Breaking Test Class Capacity Voltage grl UL 248-13 120kA 400V AC (gs) IEC 60 269-4 VDE 0636 Part 40 A B Power Loss [W] 1.2 1.5 1.8 1.9 2.3 3.2 Dimensions [in / mm] 1.26 / 32 0.25 / 6.35 Pre-arcing Total I 2 t I 2 t @ 400V AC [A 2 s] [A 2 s] 1.8 11 3.0 18 5.1 31 12 69 20 120 35 210 7006584 Accessories Fuse Clips Page 199429 PCB 348 Press on Cap Leads 204100 up to 12.5A maximum 204101 up to 20A maximum Page 348 332
URL URL E180276 Size 6.3mmx32mm Rated Voltage [Un] 400V AC Rated Breaking Test Capacity Voltage 120kA 400V AC Class grl (gs) UL 248-13 IEC 60 269-4 VDE 0636 Part 40 Coefficients for Heavy Duty Applications a A2 B1 B2 Cf3 130 0.8 1.25 0.8 0.8 Cut-Off current Characteristics Time-Current Characteristics Cut-Off Current - Peak [ka] Virtual Pre-arcing time - [s] Prospective Short Circuit Current [ka] (Symmetrical r.m.s.) R.M.S. Prospective Current [A] Fusing Time Limits Rated Current 6.3A 12.5A 16A 20A 1.1I n > 1hr 1.25I n 1.6I n > 1hr < 1hr < 1hr 2.0I n < 120s < 120s 333
URL URL E180276 Size 10x38mm Rated Current I n Without indicator Rated Voltage Rated Breaking Test Class [Un] Capacity Voltage grl 600V AC 200kA 500V AC (gs) Without indicator PCB Without indicator 50.6mm UL UL UL [A] Article Number rec Article Number rec Article Number rec 6 6003434.6 6006434.6 6007534.6 8 6003434.8 6006434.8 6007534.8 10 6003434.10 6006434.10 6007534.10 12 6003434.12 6006434.12 6007534.12 16 6003434.16 6006434.16 6007534.16 20 6003434.20 6006434.20 6007534.20 25 6003434.25 6006434.25 6007534.25 30 6003434.30 6006434.30 6007534.30 Weight [kg / 1] 0.009 Units per Package 10 10 10 Power Loss [W] 1.0 1.3 1.1 1.9 2.4 3.5 3.8 4.3 UL 248-13 IEC 60 269-4 VDE 0636 Part 40 Pre-arcing I 2 t [A 2 s] 2.5 3.3 5.1 8.7 17 29 66 120 Total I 2 t @ 500V AC [A 2 s] 20 36 41 69 130 240 530 950 A B Dimensions in / mm 1.50 / 38 0.41 / 10.3 6003434 6006434 A B C D E F G Dimensions in / mm 1.50 / 38 0.41 / 10.3 0.03 / 0.8 1.53 / 38.8 0.65 / 16.4 0.20 / 5.1 0.05 / 1.2 Accessories 6007534 Dimensions in / mm A 1.50 / 38 B 0.41 / 10.3 C 1.99 / 50.6 D 0.31 / 0.8 E 0.24 / 6.0 F 2.31 / 58.8 G 0.25 / 6.4 H 0.42 / 10.8 I 0.16 / 4.0 J 0.24 / 6.0 Page Fuse Modules - DIN Rail Mounting Fuse Clips 5106304. 1-Pole 5806316 Fuse Clips PCB mounting 345 5106304.L 1-Pole w/neon lamp indicator 5806319 Fuse Clips PCB mounting 5106304.2 2-Pole 5806317 Fuse Clips Screw mounting 5106304.2L 2-Pole w/neon lamp indicator 6301701 Clamping plate for 5806317 5106304.3 3-Pole 6101701.3 Terminal bar for 5806317 5106304.3L 3-Pole w/neon lamp indicator E186970 Page 348 349 334
URL URL E180276 Size 10x38mm Rated Voltage [Un] 600V AC Rated Breaking Test Capacity Voltage 200kA 500V AC Class grl (gs) UL 248-13 IEC 60 269-4 VDE 0636 Part 40 Coefficients for Heavy Duty Applications a A2 B1 B2 Cf3 150 1.0 1.25 0.5 0.8 Cut-Off current Characteristics Time-Current Characteristics Cut-Off Current - Peak [ka] Virtual Pre-arcing time - [s] Prospective Short Circuit Current [ka] (Symmetrical r.m.s.) Arc voltage diagram E03434-60_1 Reduction factor for I 2 t total R.M.S. Prospective Current [A] Reduction factor for power loss 1400 1.4 1.0 1200 1.2 0.8 U L V AC 1000 K B 1.0 K w 0.6 800 0.8 0.4 600 0.6 0.2 400 100 300 500 700 U V B AC 0.4 100 300 500 700 U V B AC 0 0 0.2 0.4 0.6 0.8 1.0 I I B N 335
URL URL Rated Voltage Rated Breaking Test Class [Un] Capacity Voltage grl UL 248-13 690V AC - IEC 200kA 690V AC (gs) IEC 60 269-4 E180276 700V AC - UL 30kA 440V DC VDE 0636 Part 40 Size 14x51mm Rated Current I n Without indicator With striker Without indicator 63mm UL UL UL [A] Article Number rec Article Number rec Article Number rec 10 5012434.10 5012634.10 5012934.10 12 5012434.12 5012634.12 5012934.12 16 5012434.16 5012634.16 5012934.16 20 5012434.20 5012634.20 5012934.20 25 5012434.25 5012634.25 5012934.25 30 5012434.30 5012634.30 5012934.30 32 5012434.32 5012634.32 5012934.32 35 5012434.35 5012634.35 5012934.35 40 5012434.40 5012634.40 5012934.50 Weight [kg / 1] 0.03 0.03 0.03 Units per Package 10 10 10 Power Loss Pre-arcing I 2 t [W] [A 2 s] 1.9 8 2.3 12 2.8 25 3.0 46 3.2 100 3.8 190 4.0 250 4.2 370 4.4 420 Total I 2 t @ 690V AC [A 2 s] 60 90 190 340 740 1 400 1 900 2 800 3 100 A B Dimensions [in / mm] 2.00 / 51 0.55 / 14 5012434 512934 A 2.00 / 51 B 0.55 / 14 C min 0.28 / 7 D 0.20 / 4.9 5012634 Accessories A B C D E F Dimensions [in / mm] 2.00 / 51 0.55 / 14 2.50 / 63.5 3.03 / 77 0.34 / 8.7 0.32 / 5.5 Page Fuse Modules - DIN Rail Mounting w/lockout Clip Fuse Clips 5105805.1 1-Pole 6100101.2 Fuse Clips Screw mounting 346 5105805.1L 1-Pole w/neon lamp indicator 6301701 Clamping plate for 6100101.2 5105805.1S 1-Pole w/microswitch 5805806 Fuse Clips PCB mounting 5105805.2 2-Pole 5105805.2L 2-Pole w/neon lamp indicator 5105805.2S 2-Pole w/microswitch 750V/50A 5105805.3 3-Pole 5105805.3L 3-Pole w/neon lamp indicator E186970 5105805.3S 3-Pole w/microswitch Page 349 336
URL URL Rated Voltage Rated Breaking Test Class [Un] 690V AC - IEC Capacity 200kA Voltage 690V AC grl (gs) UL 248-13 IEC 60 269-4 E180276 700V AC - UL 30kA 440V DC VDE 0636 Part 40 Size 14x51mm Coefficients for Heavy Duty Applications a A2 B1 B2 Cf3 130 1.0 1.25 0.5 0.8 Cut-Off current Characteristics Time-Current Characteristics Cut-Off Current - Peak [ka] Virtual Pre-arcing time - [s] Prospective Short Circuit Current [ka] (Symmetrical r.m.s.) R.M.S. Prospective Current [A] 337
URL URL Rated Voltage Rated Breaking Test Class [Un] Capacity Voltage grl UL 248-13 690V AC - IEC 200kA 690V AC (gs) IEC 60 269-4 E180276 700V AC - UL 30kA 440V DC VDE 0636 Part 40 Size 22x58mm Rated Current I n Without striker [A] Article Number 25 5014034.25 30 5014034.30 32 5014034.32 35 5014034.35 40 5014034.40 50 5014034.50 63 5014034.63 80 5014034.80 100 5014034.100 With striker* Without striker Without indicator Power Pre-arcing Total 80mm PCB Loss** I 2 t I 2 t UL UL UL UL @ 690V AC rec Article Number rec Article Number rec rec [W] [A 2 s] [A 2 s] 5014234.25 5014534.25 5014634.25 3.6 100 800 5014234.30 5014534.30 5014634.30 4.6 190 1 500 5014234.32 5014534.32 5014634.32 4.8 250 2 000 5014234.35 5014534.35 5014634.35 5.0 370 3 000 5014234.40 5014534.40 5014634.40 5.2 420 3 400 5014234.50 5014534.50 5014634.50 5.4 870 7 000 5014234.63 5014534.63 5014634.63 6.8 1 300 10 500 5014234.80 5014534.80 5014634.80 7.5 2 500 20 000 5014234.100 5014534.100 5014634.100 9.7 4 600 37 000 *Striker minimum operating Voltage 10V ** Power loss of fuse-base needs to be considered Weight [kg / 1] 0.055 Units per Package 10 5014034 5014234 5014534 5014634 50 145 34 Accessories Page Fuse Modules - DIN Rail Mounting w/lockout Clip Fuse Clips & Terminal Links 5106005.1 1-Pole 6100201.3 Fuse Clips Screw mounting 347 5106005.1L 1-Pole w/neon lamp indicator 6300201 Clamping plate for 6100201.3 5106005.1S 1-Pole w/microswitch 6100201.4 Terminal Link for 6100201.3 5106005.2 2-Pole 5806006 Fuse Clips PCB mounting 5106005.2L 2-Pole w/neon lamp indicator 5106005.2S 2-Pole w/microswitch 750V/100A 5106005.3 3-Pole 5106005.3L 3-Pole w/neon lamp indicator E186970 5106005.3S 3-Pole w/microswitch Page 350 338
URL URL Rated Voltage Rated Breaking Test Class [Un] Capacity Voltage grl UL 248-13 690V AC - IEC 200kA 690V AC (gs) IEC 60 269-4 E180276 700V AC - UL 30kA 440V DC VDE 0636 Part 40 Size 22x58mm Coefficients for Heavy Duty Applications a A2 B1 B2 Cf3 130 1.0 1.25 0.6 0.8 Cut-Off current Characteristics Time-Current Characteristics Cut-Off Current - Peak [ka] Virtual Pre-arcing time - [s] Prospective Short Circuit Current [ka] (Symmetrical r.m.s.) R.M.S. Prospective Current [A] 339
URL URL E186970 Size NH000/00 DIN 80 Accessories Fuse Bases 2118901 21 189 11 Dimensions [in / mm] 2118901 2118908 2118911 A 4.96 / 126 4.96 / 126 4.96 / 126 B 1.57 / 40 B 1 1.57 / 40 B 2 1.34 / 34 C 0.50 / 13 0.50 / 13 0.50 / 13 D 0.75 / 19 0.75 / 19 0.75 / 19 E 3.15 / 80 3.15 / 80 3.15 / 80 F 0.12 / 3 0.12 / 3 0.12 / 3 G 1.73 / 44 1.81 / 46 G 1 2.00 / 51 G 2 1.73 / 44 H 4.40 / 112 2.91 / 74 4.40 / 112 I 0.26 / 6.5 0.26 / 6.5 0.26 / 6.5 J 0.60 / 15.5 0.60 / 15.5 0.60 / 15.5 K 0.63 / 16 0.63 / 16 0.63 / 16 L max 5.75 / 146 5.75 / 146 L 1 5.75 / 146 L 2 6.50 / 165 M M8 M8 M8 N 0.98 / 25 0.98 / 25 0.98 / 25 Max M8 nut torque 12N m 8.8lb ft 106lb in Max base mounting torque 4N m 3lb ft 35lb in 2118908 340
URL URL NH 000/00 Fuse Size 000 / 00 1 - Pole 3 - Pole Fuse Base Article No. 2100101 2100103 Rated Voltage 690V AC -IEC Accessories Fuse Bases Rated Current Rated Power Acceptance Weight Units per [A] 160 [W] 12 [kg/1] 0.44 0.81 Package 1 External Wall DIN 43620 Partition Wall Insulating Article No. Article No. Contact Covers 2500101 2500103.2 M8x20 2100101 2500101 2500103.2 Maximum Torque Fuse base mounting - 12N m Cable connection - 12N m 2100103-3 Pole with two partition walls 341
URL URL NH 1 Rated Voltage 690V AC -IEC Accessories Fuse Bases DIN 43620 Fuse Fuse Base Rated Rated Power Weight Units External Wall Partition Wall Insulating Size Current Acceptance per Contact Covers 1 Article No. [A] [W] [kg/1] Package Article No. Article No. Article No. 1 - Pole 2100301 0.72 2100303.30 250 32 1 25 003 01 3 - Pole 2100303 2.31 2100301.26 Parallel installation of single pole fuse bases, distance between centers 58mm. 2500301 2100303 21 003 03.30 Maximum Torque Fuse base mounting - 20N m Cable connection - 32N m 2100301.26 2100303 with two partition walls 342
URL URL Size NH 2 Rated Voltage 690V AC -IEC Accessories DIN 43620 Fuse Bases Fuse Fuse Base Rated Rated Power Weight Units External Wall Partition Wall Insulating Size Current Acceptance per 2 Article No. [A] [W] [kg/1] Package Article No. Article No. Contact Covers 1 - Pole 2100401 0.88 400 45 3 - Pole 2100403 3.15 1 2500401 2100401.26 Parallel installation of single pole fuse bases, distance between centers 65mm. 2500401 2100401 Maximum Torque Fuse base mounting - 20N m Cable connection - 32N m 2100401.26 2100403 with two partition walls 343
URL URL NH 3 Rated Voltage 690V AC -IEC Accessories DIN 43620 Fuse Bases Fuse Fuse Base Rated Rated Power Weight Units External Wall Partition Wall Insulating Size Current Acceptance per 3 Article No. [A] [W] [kg/1] Package Article No. Article No. Contact Covers 1 - Pole 2100501 630 60 1.16 1 2500501 2100501.26 Parallel installation of single pole fuse bases, distance between centers 75mm. 2500501 2100501 Maximum Torque Fuse base mounting - 20N m Cable connection - 32N m 2100501.26 344
URL URL E186970 Article Number 2132301 2132302 Mounting Centers [mm] 110 Rated Voltage IEC / UL [V] 1400 / 1200 Rated Current IEC / UL [A] 630 / 630 1250 / 1250 2132301 2132302 E186970 Accessories Fuse Bases & Fuse Modules Interrupt Weight withstand current [ka] [kg / 1] 200 1.22 1.26 7.10 /180 3.35 / 85 Dimensions [in/mm] 2132301 2132302 A 7.10 /180 B C 3.35 / 85 0.63 / 16 0.63 / 16 0.83 /21 D 0.83 /21 4.33 / 110 E 4.33 / 110 0.30 / 8 F 0.30 / 8 1.80 / 46 G 1.80 / 46 5.00 / 127 H(Size 1) 5.00 / 127 5.12 / 130 H(Size 2) 5.12 / 130 5.40 / 137 H(Size 3) 5.40 / 137 0.35 / 9 I 0.35 / 9 4.10 / 104 J(Size 1) 4.10 / 104 4.25 / 108 J(Size 2) 4.25 /108 4.53 / 115 J(Size 3) 4.53 / 115 0.98 / 25 K 0.98 / 25 8.07 / 205 L max 8.07 / 205 / M10 2.36 / 60 M N / M10 2.36 / 60 1.57 /40 O 1.57 /40 Nut Torque Max - 48N m / 35.3lb ft Base Torque Max - 15N m / 41.3.3lb in 345
URL URL E186970 Rated Voltage 750V AC - UL 690V AC / 750V DC - IEC w/lamp indicator Accessories UL 4248-1 CSA 22.2 Fuse Modules IEC 60269-1 & 2 VDE 0636-1 & 2 IEC 60947-1 & 2 VDE 0660-100 & 107 5106305 5105805 5106005 10mm x 38mm 14mm x 51mm 22mm x 58mm Rated voltage; UL(rec) 750V AC/DC 750V AC 750V AC Rated voltage; IEC 690V AC / 750V DC 690V AC 690V AC Rated current; Power acceptance - rated/maximum; Conductor solid; Conductor stranded; Maximum torque; Utilization Category; AC-21B 690V Pollution degree; Rated insulation voltage; U imp = 6kV Degree of protection; IP-20* Construction, body & handle; Contacts; Flammability "UL 94"; Operating temperature range; Rating of light indicator; *Depends on connection and mounting parts; Contact SIBA for; stranded wire or solid wire or solid wire ** Avoid handling of lever during installation or maitenance below -20⁰C Important: DO NOT OPEN UNDER LOAD! 30A UL, 32A IEC 50A UL, 50A IEC 100A UL, 100A IEC 3W/4W 5W/6W 9.5W/12W 0.75mm 2-16mm 2 0.75mm 2-16mm 2 1.5mm 2-35mm 2 1.5mm 2-25mm 2 1.5mm 2-50mm 2 1.5mm 2-35mm 2 2.5N m 2.5N m - 3N m 3.5N m - 4N m DC-20B 750V AC-22B 500V 3 3 3 U imp = 6kV U imp = 8kV U imp = 8kV Contact SIBA* Contact SIBA* Contact SIBA* Thermoplastic Polyester copper-silver plated V0 V0 V0-50⁰C to +85⁰C** 120V AC/DC - 690V AC/DC 230V AC/DC - 690V AC/DC 230V AC/DC - 690V AC/DC 6mm 2 10mm 2 16mm 2 10mm 2 16mm 2 25mm 2 5106305 Series for 10x38mm Fuse Links Article No. 5106305.1 No indicator 1-Pole 5106305.1L w/ Neon lamp indicator 5106305.2 No indicator 2-Pole 5106305.2L w/ Neon lamp indicator 5106305.3 No indicator 3-Pole 5106305.3L w/ Neon lamp indicator 5106305.4 No indicator 4-Pole 5106305.4L w/ Neon lamp indicator Fuse module current derating for adjacent pole with direct contatact Number of Poles De-rating factor 1-3 1.0XI n 4-6 0.8XI n 7-9 0.7XI n 10 0.6XI n 750V/30A 346
URL URL E186970 Rated Voltage 750V AC - UL 690V AC - 750V DC - IEC w/lamp indicator Accessories UL 4248-1 CSA 22.2 Fuse Modules IEC 60269-1 & 2 VDE 0636-1 & 2 IEC 60947-1 & 2 VDE 0660-100 & 107 5105805 Series for 14x51mm Fuse Links Article No. 5105805.1 5105805.1L 5105805.1S 5105805.2 5105805.2L 5105805.2S 5105805.3 5105805.3L 5105805.3S 1-Pole 2-Pole 3-Pole Description No indicator w/ Neon lamp indicator w/ Microswitch No indicator w/ Neon lamp indicator w/ Microswitch No indicator w/ Neon lamp indicator w/ Microswitch Fuse module current derating for adjacent pole with direct contatact Number of Poles De-rating factor 1-3 1.0XI n 4-6 0.8XI n 7-9 0.7XI n 10 0.6XI n 750V/50A 5106005 Series for 22x58mm Fuse Links Article No. 5106005.1 5106005.1L 5106005.1S 5106005.2 5106005.2L 5106005.2S 5106005.3 5106005.3L 5106005.3S 1-Pole 2-Pole 3-Pole Description No indicator w/neon lamp indicator w/microswitch No indicator w/neon lamp indicator w/microswitch No indicator w/neon lamp indicator w/microswitch Fuse module current derating for adjacent pole with direct contatact Number of Poles De-rating factor 1-3 1.0XI n 4-6 0.8XI n 7-9 0.7XI n 10 0.6XI n 750V/125A Lockout Clip 5106005.101 347
URL URL Accessories Fuse Clips Fuse Clips for 6.3mm Diameter Contacts 199429 Fuse Press on Caps with Axial Leads 6.3mm Diameter fuses Lead diameter Rated Current D[mm] Maximum [A] 204100 0.8 12.5 204101 0.8 20 5806316 Fuse Clips for 10mm Diameter Contacts Dimensions [ in / mm] 5806316 5806319 0.43 / 11.0 A 0.43 / 11.0 0.47 / 12.0 B 0.47 / 12.0 0.71 / 18.0 C 0.71 / 18.0 0.14 / 3.6 D 0.14 / 3.6 0.08 / 2.0 E E 1 0.08 / 2.0 E 2 0.12 / 3.0 0.03 / 0.65 F 0.03 / 0.65 0.43 / 11.0 G 0.43 / 11.0 0.18 / 4.45 H 0.18 / 4.45 0.06 / 1.5 I 0.06 / 1.5 0.22 / 5.5 J 0.22 / 5.5 0.45 / 11.5 L 0.45 / 11.5 5806319 348
URL URL Accessories Fuse Clips Fuse Clips for 10mm Diameter Contacts 5806317 6100101.2 5805806 5806317 6301701 0.43 / 11.0 A 0.39 / 10.0 0.47 / 12.0 B 0.35 / 9.0 0.71 / 18.0 C 0.08 / 2.0 0.17 / 4.2 D D 1 0.17 / 4.2 D 2 E 0.03 / 0.65 F G H 0.06 / 1.5 I 0.22 / 5.5 J 0.45 / 11.5 L Fuse Clips for 14mm Diameter Contacts Dimensions [ in / mm] 6100101.2 6301701 0.61 / 15.5 A 0.39 / 10.0 0.61 / 15.5 B 0.35 / 9.0 0.90 / 22.8 C 0.08 / 2.0 0.17 / 4.2 D 0.17 / 4.2 0.03 / 0.7 F 0.06 / 1.5 I 0.26 / 6.5 J 0.57 / 14.5 L 5805806 0.63 / 16.0 A 0.47 / 12.0 B 0.61 / 15.5 C 0.14 / 3.5 E 1 0.20 / 5.0 E 2 0.03 / 0.70 F 0.42 / 10.7 G 0.17 / 4.2 H 0.04 / 1.0 I 0.12 / 3.0 0.33 / 8.5 K L Dimensions [ in / mm] Dimensions [ in / mm] 6101701.3 0.83 / 21.0 0.24 / 6.0 0.08 / 2.0 / M5 / M4 0.61 / 15.5 0.43 / 11.0 0.22 / 5.5 6301701 6101701.3 6301701 349
URL URL Accessories Fuse Clips Fuse Clips for 22mm Diameter Contacts 6100201.3 Dimensions [ in / mm] 6100201.3 6300201 0.73 / 18.5 A 0.73 / 18.5 0.72 / 18.4 B 0.59 / 15.0 1.42 / 36.0 C 0.12 / 3.0 0.18 / 4.2 D / M4 D 1 D 2 6100201.4 1.40 / 35.5 0.59 / 15.0 0.12 / 3.0 / M4 / M6 0.31 / 8.0 E 0.31 / 8.0 0.31 / 8.0 0.05 / 1.2 F F 1 0.30 / 7.5 F 2 0.31 / 8.0 0.31 / 8.0 G 0.31/ 8.0 0.31 / 8.0 0.08 / 2.0 I 0.16 / 4.0 J 0.16 / 4.0 0.98 / 25.0 L 6300201 6100201.4 5806006 Dimensions [ in / mm] 5806006 0.67 / 17.0 A 0.79 / 20.0 B 0.91 / 23.0 C 0.08 / 2.0 D E 0.24 / 6.0 E 1 0.14 / 3.5 E 2 0.03 / 0.8 F 0.42 / 10.7 G 0.17 / 4.2 H 0.04 / 1.0 I 0.13 / 3.2 K 0.49 / 12.5 L 350
URL URL Accessories Accessories Microswitches GL - Microswitch Standard Level Insulating Change Interrupt Rating Voltage Over AC DC Article Number [V] Circuits [V] [A] [V] [A] 2800201 2800202 2800203 2800204 Weight [kg / 1] 0.02 Units per Package 10 1 250 1 5V AC 5V DC Low Level Minimum 5(resistive) 33 3(resistive) 3(inductive) 26 3(inductive L/R =10ms) 1mA(resistive) Interrupt Rating Maximum 30V AC 0.3A 30V DC 2800202 / 2800204 (Red Hammer) 2800201 / 2800203 (Black Hammer) M - Microswitch Standard Level Insulating Change Over Interrupt Rating Voltage Circuits Minimum Load Requirement AC/DC Maximum AC / DC Article Number [V] [V] resistive [ma] [V] [A] 2800104 1 30 10 10 2801104 1 5 Low Level 1 10 1 2800104 Standard 2801104 Low Level E186970 351
URM URM Fuses for Semiconductor Protection Knife Blade Contacts - German Standard SIBA Ultra-Rapid NH knife blade contact fuse type are available in various sizes and four voltage ratings. They follow DIN/VDE-IEC standard and can be fitted in a open fuse bases. Usage in the fuse bases requires comparison the power loss of the fuse and the power acceptance of the fuse base or switch. All SIBA type NH fuses are available with either integral blown fuse indicator or a separately fitted trip indicator microswitch operation. Class: Voltage Ratings: Sizes: Current Ratings: Standards: gr/ar 500V AC, 690V AC, 1000V AC and 2000V AC 000, 00, 0, 1, 2 and 3 16A - 800A DIN 43620 DIN 43653 Features and Benefits High current interrupt ratings up to 120kA Class gr to DIN VDE 0636-40 Class ar to IEC 60269-4 and DIN VDE 0636-40 Fuse bases, fuse switches, microswitches and other accessories are available 352
URM URM Fuses for Semiconductor Protection - German Standard Article Description Selection Guide Technical Data NH000/00,NH0, NH1, NH2, & NH3 500V AC 2000004 NH000 knife blade contacts With fitting for microswitch 2000104 2000704 2000204 2000904 NH1 knife blade contacts 2000404 External wall for 21 003 01 & 03 2100303.30 Partition wall for 21 003 01 2100301.26 Insulating Contact Cover 2100401 NH2, 1-Pole 2100403 NH2, 1-Pole 2500401 External wall for 21 004 01 & 03 2100401.26 Insulating Contact Cover 2100501 NH3, 1-Pole NH2 knife blade contacts 2500501 External wall for 21 005 01 2100501.26 Insulating Contact Cover 2132301 DIN 110mm 1-Pole, 630A 2132302 DIN 110mm 1-Pole, 1250A 368 368-369 2021220 NH2 knife blade contacts With fitting for microswitch 370 370-371 2021320 NH3 knife blade contacts With fitting for microswitch 372 372-373 1000V AC 2038404 NH0 knife blade contacts With fitting for microswitch 374 374-375 660V AC 2037304 NH3 bolted blade contacts 80mm With fitting for microswitch 376 376-377 1000V AC 2040704 NH3 bolted blade contacts 127mm With fitting for microswitch 378 378-379 2000V AC 2040404 NH3 bolted blade contacts 208mm With fitting for microswitch 380 380-381 2100101 NH000/00, 1-Pole 2100103 NH000/00, 3-Pole 2500101 External wall for 21 001 01 & 03 2500103.2 Partition wall for 21 001 01 With fitting for microswitch With integrated striker 2000504 NH3 knife blade contacts With fitting for microswitch 2001104 NH3 knife blade contacts With integrated striker 690V AC 2047720 NH000 knife blade contacts With fitting for microswitch 2100301 NH1, 1-Pole 2100303 NH1, 3-Pole 2500301 NH00 knife blade contacts With fitting for microswitch 2020920 NH00 knife blade contacts With fitting for microswitch 2021120 NH1 knife blade contacts With fitting for microswitch Fuse Bases 360 360-361 362 364 382 384 385 386 E186970 387 364-365 366 366-367 383 356-357 NH0 knife blade contacts With fitting for microswitch 358 358-359 2001004 NH2 knife blade contacts 2100204 NH0, 1-Pole NH00 knife blade contacts 2000304 NH1 knife blade contacts With integrated striker With fitting for microswitch With integrated striker 356 362-363 353
URM URM Accessories Microswitches 2800201 GL microswitch, standard level 2800203 GL microswitch, low level 2800202 GL microswitch, standard level 2800204 GL microswitch, low level 387 354
URM URM 355
URM URM Rated Voltage [Un] 500V AC Rated Breaking Test Capacity Voltage 120kA 500V AC Class gr100a IEC 60 269-4 ar125a VDE 0636 Part 40 Size NH000/00 Rated Current I n [A] 6 10 16 20 25 32 35 40 50 63 80 100 125 160 200 w/combi- Indicator and Fitting for Microswitch Article Number 2000004.6 2000004.10 2000004.16 2000004.20 2000004.25 2000004.32 2000004.35 2000004.40 2000004.50 2000004.63 2000004.80 2000104.100 2000104.125 2000104.160 2000104.200 With Integrated Signal Indicator Article Number 2000704.6 2000704.10 2000704.16 2000704.20 2000704.25 2000704.32 2000704.35 2000704.40 2000704.50 2000704.63 2000704.80 2000704.100 2000704.125 2000704.160 Weight [kg / 1] 0.11/ 0.15 0.19 Units per Package 3 Power Pre-arcing Total Loss I 2 t I 2 t * @ 500V AC [W] [A 2 s] [A 2 s] 2.7 0.72 10 2.6 3 42 4.8 10 140 5.7 185 6.7 8.1 9 10 12 14 19 21 25 30 36 17 20 305 67 460 82 650 90 800 190 1 400 330 2 600 510 4 200 920 7 600 1 660 12 300 2 800 19 500 4 800 33 500 2000004 / 2000104 Dimensions in / mm 2000004 2000104 2000704 2.13 / 54 2.13 / 54 A max 2.13 / 54 a 0.91 / 23 0.60 / 15 0.60 / 15 B 0.60 / 15 b 0.67 / 17 1.85 / 47 1.85 / 47 C 1.85 / 47 c 0.51 / 13 0.80 / 20.3 1.16 / 29.5 D 1.60 / 40.5 1.80 / 46 E 0.24 / 6 0.24 / 6 F 1.38 / 35 1.38 / 35 G 2.05 / 52 2.28 / 58 H 2.28 / 58 0.28 / 7 0.51 / 13 I 3.07 / 78 3.07 / 78 L 3.07 / 78 a 2000704 b c Accessories Fuse Bases 2100101 2100103 Fuse Base, 1-Pole Fuse Base, 3-Pole Page 382 Microswitch (Red Hammer) 2800202 Standard Level Page 387 356
URM URM Rated Voltage Rated Breaking Test Class [Un] 500V AC Capacity 120kA Voltage 500V AC gr100a IEC 60 269-4 ar125a VDE 0636 Part 40 Size NH000/00 Coefficients for Heavy Duty Applications a A2 B1 B2 Cf3 130 1.0 1.25 0.6 0.8 Cut-Off current Characteristics Time-Current Characteristics Cut-Off Current - Peak [ka] Virtual Pre-arcing time - [s] Prospective Short Circuit Current [ka] (Symmetrical r.m.s.) R.M.S. Prospective Current [A] 357
URM URM Rated Voltage Rated Breaking Test Class [Un] 500V AC Capacity 120kA Voltage 500V AC gr100a IEC 60 269-4 ar125a VDE 0636 Part 40 Size NH0 Rated Current I n [A] 16 20 25 32 35 40 50 63 80 100 125 160 w/combi- Indicator Power Pre-arcing Total and Fitting for Loss I 2 t I 2 t * Microswitch @ 500V AC Article Number [W] [A 2 s] [A 2 s] 2000204.16 6.1 10 140 2000204.20 2000204.25 2000204.32 2000204.35 2000204.40 2000204.50 2000204.63 2000204.80 2000204.100 7.2 8.6 10 11 12 15 18 21 25 17 20 67 82 90 190 330 510 920 185 305 460 650 800 1 400 2 600 4 200 7 600 2000204.125 2000204.160 30 36 1 660 2 800 12 300 19 500 Weight [kg / 1] 0.24 Units per Package 3 2000204 Dimensions in / mm A max 2.80 / 71.5 B 0.60 / 15 C 2.56 / 65 D 1.16 / 29.5 E 1.80 / 46 F 0.24 / 6 G 1.38 / 35 H 2.28 / 58 I 0.50 / 13 L 4.92 / 125 Accessories Fuse Bases Page Microswitch Page 2100204 Fuse Base, 1-Pole 383 2800204 Standard Level (Red Hammer) 387 358
URM URM Size NH0 Rated Voltage Rated Breaking Test [Un] Capacity Voltage 500V AC 120kA Class gr100a IEC 60 269-4 ar125a VDE 0636 Part 40 Coefficients for Heavy Duty Applications a A2 B1 B2 Cf3 130 0.6 1.25 0.6 0.8 Cut-Off current Characteristics Time-Current Characteristics Cut-Off Current - Peak [ka] Virtual Pre-arcing time - [s] Prospective Short Circuit Current [ka] (Symmetrical r.m.s.) N00204-60_1 R.M.S. Prospective Current [A] Arc voltage Reduction factor Reduction factor for diagram for I 2 t total power loss 1400 1.2 1.0 U L V AC 1200 1000 1.0 K B 0.8 0.8 K w 0.6 800 0.6 0.4 600 0.4 0.2 400 250 350 450 550 UB V AC 0.2 250 350 450 550 UB V AC 0 0 0.2 0.4 0.6 0.8 1.0 I B I N 359
URM URM Rated Voltage [Un] 500V AC Rated Breaking Test Capacity Voltage 120kA Class gr100a IEC 60 269-4 ar125a VDE 0636 Part 40 Size NH1 Rated w/combi- Indicator With Integrated Current and Fitting for Signal Indicator I n Microswitch [A] Article Number Article Number 63 2000304.63 2000904.63 80 2000304.80 2000904.80 100 2000304.100 2000904.100 125 2000304.125 2000904.125 160 2000304.160 2000904.160 200 2000304.200 2000904.200 224 2000304.224 2000904.224 250 2000304.250 2000904.250 315 2000304.315 2000904.315 Weight [kg / 1] 0.37 0.40 Units per Package 3 Power Pre-arcing Total Loss I 2 t I 2 t * @ 500V AC [W] [A 2 s] [A 2 s] 18 330 2 600 22 510 4 200 27 920 7 600 33 1 660 12 300 40 2 400 19 500 40 5 800 37 000 53 7 600 42 000 62 9 600 55 000 79 14 000 90 000 2000304 Dimensions in / mm 2000304 2000304 2000904 160A 200A 2.95 / 75 2.95 / 75 A max 2.95 / 75 0.80 / 20.3 0.80 / 20.3 a B 1.20 / 30.5 0.80 / 20.3 b 0.94 / 24 2.56 / 65 2.56 / 65 C 2.56 / 65 c 0.55 / 14 1.16 / 29.5 1.65 / 42 D 1.80 / 46 2.03 / 51.5 E 0.24 / 6 0.24 / 6 F 1.57 / 40 1.57 / 40 G 2.28 / 58 2.52 / 64 H 2.52 / 64 0.30 / 8 0.55 / 14 I 5.30 / 135 5.30 / 135 L 5.30 / 135 a 2000904 b c Accessories Fuse Bases Page Microswitch Page 2100301 Fuse Base, 1 - Pole 2800202 Standard Level (Red Hammer) 387 384 2100303 Fuse Base, 3 - Pole 360
URM URM Size NH1 Rated Voltage Rated Breaking Test [Un] Capacity Voltage 500V AC 120kA 500V AC Class gr100a IEC 60 269-4 ar125a VDE 0636 Part 40 Coefficients for Heavy Duty Applications a A2 B1 B2 Cf3 130 0.6 1.25 0.6 0.8 Cut-Off current Characteristics Time-Current Characteristics Cut-Off Current - Peak [ka] Virtual Pre-arcing time - [s] Prospective Short Circuit Current [ka] (Symmetrical r.m.s.) N00304-60_1 R.M.S. Prospective Current [A] Arc voltage Reduction factor Reduction factor for diagram for I 2 t total power loss 1400 1.2 1.0 U L V AC 1200 1000 1.0 K B 0.8 0.8 K w 0.6 800 0.6 0.4 600 0.4 0.2 400 250 350 450 550 UB V AC 0.2 250 350 450 550 UB V AC 0 0 0.2 0.4 0.6 0.8 1.0 I B I N 361
URM URM Rated Voltage Rated Breaking Test Class [Un] 500V AC Capacity 120kA Voltage 500V AC gr100a IEC 60 269-4 ar125a VDE 0636 Part 40 Size NH2 Rated Current I n [A] 100 125 160 200 224 250 315 355 400 w/combi- Indicator and Fitting for Microswitch With Integrated Signal Indicator Article Number Article Number 2000404.100 2001004.100 2000404.125 2001004.125 2000404.160 2001004.160 2000404.200 2001004.200 2000404.224 2001004.224 2000404.250 2001004.250 2000404.315 2001004.315 2000404.355 2001004.355 2000404.400 2001004.400 Weight [kg / 1] 0.37 / 0.65 0.70 Units per Package 3 Power Pre-arcing Total Loss I 2 t I 2 t * @ 500V AC [W] [A 2 s] [A 2 s] 23 920 7 600 29 1 660 12 300 40 2 400 19 500 40 5 800 37 000 44 7 600 39 000 51 9 600 51 000 69 14 000 84 000 81 20 000 125 000 94 27 000 155 000 2000404 2000404 250A 2.95 / 75 0.80 / 20 2.56 / 65 Dimensions in / mm 2000404 2001004 315A 2.95 / 75 A max 2.95 / 75 1.02 / 26 a B 1.65 / 42 1.02 / 26 b 1.10 / 28 2.56 / 65 C 2.56 / 65 c 0.55 / 14 1.65 / 42 2.10 / 53 D 2.03 / 51.5 2.32 / 59 E 0.24 / 6 0.24 / 6 F 1.90 / 48 1.90 / 48 G 2.83 / 72 2.83 / 72 H 0.55 / 14 0.55 / 14 I 5.90 / 150 5.90 / 150 L 2.83 / 72 5.90 / 150 a 2001004 b c Accessories Fuse Bases 2100401 2100403 Fuse Base, 1 - Pole Fuse Base, 3 - Pole Page 385 Microswitch 2800202 Standard Level (Red Hammer) Page 387 362
URM URM Rated Voltage [Un] 500V AC Rated Breaking Test Class Capacity Voltage gr100a IEC 60 269-4 120kA 500V AC ar125a VDE 0636 Part 40 Size NH2 Coefficients for Heavy Duty Applications a A2 B1 B2 Cf3 130 0.6 1.25 0.6 0.8 Cut-Off current Characteristics Time-Current Characteristics Cut-Off Current - Peak [ka] Virtual Pre-arcing time - [s] Prospective Short Circuit Current [ka] (Symmetrical r.m.s.) R.M.S. Prospective Current [A] N00404-60_1 Arc voltage Reduction factor diagram for I 2 t total Reduction factor for power loss 1400 1.2 1.0 U L V AC 1200 1000 1.0 K B 0.8 0.8 K w 0.6 800 0.6 0.4 600 0.4 0.2 400 250 350 450 550 UB V AC 0.2 250 350 450 550 UB V AC 0 0 0.2 0.4 0.6 0.8 1.0 I B I N 363
URM URM Rated Voltage Rated Breaking Test Class [Un] Capacity Voltage ar IEC 60 269-4 500V AC 120kA 500V AC VDE 0636 Part 40 Size NH3 Rated Current I n [A] 160 200 224 250 315 355 400 450 500 550 630 700 w/combi- Indicator With Integrated Power Pre-arcing Total and Fitting for Signal Indicator Loss I 2 t I 2 t * Microswitch @ 500V AC Article Number Article Number [W] [A 2 s] [A 2 s] 2000504.160 2001104.160 48 2 400 19 500 2000504.200 2001104.200 56 5 800 37 000 2000504.224 2001104.224 61 7 600 39 000 2000504.250 2001104.250 65 9 600 51 000 2000504.315 2001104.315 76 14 000 84 000 2000504.355 2001104.355 83 20 000 125 000 2000504.400 2001104.400 85 27 000 155 000 2000504.450 2001104.450 90 38 000 190 000 2000504.500 2001104.500 98 47 000 240 000 2000504.550 2001104.550 110 57 000 328 000 2000504.630 2001104.630 122 80 000 470 000 2000504.700 2001104.700 135 106 000 560 000 Weight [kg / 1] 0.65 / 0.88 0.70 Units per Package 3 2000504 2000504 Dimensions in / mm 2000504 2001104 400A 450A 2.95 / 75 2.95 / 75 A max 2.95 / 75 a 1.73 / 44 1.02 / 26 1.26 / 32 B 1.02 / 26 b 1.52 / 38.5 2.56 / 65 2.56 / 65 C 2.56 / 65 c 0.67 / 17 2.10 / 53 2.56 / 65 D 2.32 / 59 2.90 / 73.5 E 0.24 / 6 0.24 / 6 F 2.36 / 60 2.36 / 60 G 3.27 / 83 3.40 / 86 H 3.40 / 86 0.55 / 14 0.67 / 17 I 5.90 / 150 5.90 / 150 L 5.90 / 150 a 2001104 b c Accessories Fuse Bases 2100501 Page Microswitch Fuse Base, 1 - Pole 386 2800202 Standard Level (Red Hammer) Page 387 364
URM URM Size NH3 Rated Voltage Rated Breaking Test Class [Un] Capacity Voltage ar 500V AC 120kA 690V AC Coefficients for Heavy Duty Applications a A2 B1 B2 Cf3 130 0.6 1.25 0.6 0.8 IEC 60 269-4 VDE 0636 Part 40 Cut-Off current Characteristics Time-Current Characteristics Cut-Off Current - Peak [ka] Virtual Pre-arcing time - [s] Prospective Short Circuit Current [ka] (Symmetrical r.m.s.) N00504-60_1 R.M.S. Prospective Current [A] Arc voltage Reduction factor Reduction factor for diagram for I 2 t total power loss 1400 1.2 1.0 U L V AC 1200 1000 1.0 K B 0.8 0.8 K w 0.6 800 0.6 0.4 600 0.4 0.2 400 250 350 450 550 UB V AC 0.2 250 350 450 550 UB V AC 0 0 0.2 0.4 0.6 0.8 1.0 I B I N 365
URM URM Rated Voltage [Un] 690V AC Rated Breaking Test Capacity Voltage 100kA 690V AC Class gr100a ar125a IEC 60 269-4 VDE 0636 Part 40 Size NH000/00 Rated Current I n [A] 10 16 20 25 32 35 40 50 63 80 100 125 160 w/combi- Indicator and Fitting for Microswitch w/combi- Indicator and Fitting for Microswitch Article Number Article Number 2047720.10 2047720.16 2047720.20 2047720.25 2047720.32 2047720.35 2047720.40 2047720.50 2020920.63 2020920.80 2020920.100 2020920.125 2000920.160 Weight [kg / 1] 0.70 0.90 Units per Package 3 Power Loss [W] 2.5 4.1 5.0 6.0 6.5 7.1 9.2 12 14 17 21 25 32 Pre-arcing I 2 t [A 2 s] 2.5 5.5 12 16 46 53 61 110 190 350 610 1 200 2 100 Total I 2 t * @ 690V AC [A 2 s] 18 40 91 110 330 380 450 820 1 400 2 600 4 500 9 100 15 000 2047704 / 2020920 A max B C D E F G H I L Dimensions in / mm 2047720 2020920 2.13 / 54 2.13 / 54 0.60 / 15 0.60 / 15 1.85 / 47 1.85 / 47 0.80 / 20.3 1.16 / 29.5 1.60 / 40.5 1.80 / 46 0.24 / 6 0.24 / 6 1.38 / 35 1.38 / 35 2.05 / 52 2.28 / 58 0.28 / 7 0.50 / 13 3.07 / 78 3.07 / 78 Accessories Fuse Bases Page Microswitch 2100101 Fuse Base, 1 - Pole 2800202 382 2100103 Fuse Base, 3 - Pole Page Standard Level (Red Hammer) 387 366
URM URM Rated Voltage Rated Breaking Test [Un] Capacity Voltage 690V AC 100kA 690V AC Class gr100a IEC 60 269-4 ar125a VDE 0636 Part 40 Size NH000/00 Coefficients for Heavy Duty Applications a A2 B1 B2 Cf3 130 0.6 1.3 0.6 0.8 Cut-Off current Characteristics Time-Current Characteristics Cut-Off Current - Peak [ka] Virtual Pre-arcing time - [s] Prospective Short Circuit Current [ka] (Symmetrical r.m.s.) R.M.S. Prospective Current [A] Arc voltage Reduction factor Reduction factor for diagram for I 2 t total power loss 1500 1.2 1.0 U L V AC 1300 1100 K B 1.0 0.8 0.8 K w 0.6 900 0.6 0.4 700 0.4 0.2 500 200 400 600 800 U V B AC 0.2 200 400 600 800 U V B AC 0 0 0.2 0.4 0.6 0.8 1.0 I I B N 367
URM URM Rated Voltage Rated Breaking Test Class [Un] Capacity Voltage gr100a IEC 60 269-4 690V AC 100kA 690V AC ar125a VDE 0636 Part 40 Size NH1 Rated Current I n [A] 40 50 63 80 100 125 160 200 250 315 w/combi- Indicator and Fitting for Microswitch Article Number 2021120.40 2021120.50 2021120.63 2021120.80 2021120.100 2021120.125 2021120.160 2021120.200 2021120.250 2021120.315 Weight [kg / 1] 0.37 Units per Package 3 Power Loss [W] 8 11 14 20 24 31 42 52 71 88 Pre-arcing Total I 2 t I 2 t * [A 2 s] 80 140 250 470 650 1 050 1 900 2 800 5 000 11 000 @ 690V AC [A 2 s] 570 1 000 1 800 3 400 4 700 7 600 14 000 21 000 36 000 76 000 2001120 A max B C D E F G H I L Dimensions in / mm 2.95 / 75 0.80 / 20.3 2.56 / 65 1.65 / 42 2.03 / 51.5 0.24 / 6 1.57 / 40 2.52 / 64 0.55 / 14 5.30 / 135 Accessories Fuse Bases Page Microswitch 2100301 Fuse Base, 1 - Pole 2800202 384 2100303 Fuse Base, 3 - Pole Page Standard Level (Red Hammer) 387 368
URM URM Rated Voltage Rated Breaking Test Class [Un] Capacity Voltage gr100a IEC 60 269-4 690V AC 100kA 690V AC ar125a VDE 0636 Part 40 Size NH1 Coefficients for Heavy Duty Applications a A2 B1 B2 Cf3 130 0.6 1.3 0.6 0.8 Cut-Off current Characteristics Time-Current Characteristics Cut-Off Current - Peak [ka] Virtual Pre-arcing time - [s] Prospective Short Circuit Current [ka] (Symmetrical r.m.s.) N21120-60_1 R.M.S. Prospective Current [A] Arc voltage Reduction factor Reduction factor for diagram for I 2 t total power loss 1500 1.2 1.0 U L V AC 1300 1100 K B 1.0 0.8 0.8 K w 0.6 900 0.6 0.4 700 0.4 0.2 500 200 400 600 800 U V B AC 0.2 200 400 600 800 U V B AC 0 0 0.2 0.4 0.6 0.8 1.0 I I B N 369
URM URM Rated Voltage Rated Breaking Test Class [Un] Capacity Voltage ar 690V AC 100kA 690V AC IEC 60 269-4 VDE 0636 Part 40 Size NH2 Rated Current I n [A] 160 200 250 315 350 400 450 w/combi- Indicator and Fitting for Microswitch Article Number 2021220.160 w/combi- Indicator and Fitting for Microswitch Article Number 2021220.200 2021220.250 2021220.315 2021220.350 2021220.400 2021220.450 Weight [kg / 1] 0.37 0.65 Units per Package 3 Power Loss [W] 42 52 71 79 85 95 100 Pre-arcing I 2 t [A 2 s] 1 900 2 800 5 000 11 000 14 000 20 000 30 000 Total I 2 t * @ 690V AC [A 2 s] 14 000 21 000 36 000 76 000 100 000 145 000 220 000 2021220 A max B C D E F G H I L 250A 2.95 / 75 0.80 / 20 2.56 / 65 1.65 / 42 2.03 / 51.5 0.24 / 6 1.90 / 48 2.83 / 72 0.55 / 14 5.90 / 150 Dimensions in / mm 315A 2.95 / 75 1.02 / 26 2.56 / 65 2.10 / 53 2.32 / 59 0.24 / 6 2.36 / 60 2.83 / 72 0.55 / 14 5.90 / 150 Accessories Fuse Bases Page Microswitch 2100401 Fuse Base, 1 - Pole 2800202 Standard Level (Red Hammer) 385 2100403 Fuse Base, 3 - Pole Page 387 370
URM URM Rated Voltage Rated Breaking Test [Un] Capacity Voltage 690V AC 100kA 690V AC Class ar IEC 60 269-4 VDE 0636 Part 40 Size NH2 Coefficients for Heavy Duty Applications a A2 B1 B2 Cf3 130 0.6 1.3 0.6 0.8 Cut-Off current Characteristics Time-Current Characteristics Cut-Off Current - Peak [ka] Virtual Pre-arcing time - [s] Prospective Short Circuit Current [ka] (Symmetrical r.m.s.) R.M.S. Prospective Current [A] N21220-60_1 Arc voltage Reduction factor diagram for I 2 t total Reduction factor for power loss 1500 1.2 1.0 U L V AC 1300 1100 K B 1.0 0.8 0.8 K w 0.6 900 0.6 0.4 700 0.4 0.2 500 200 400 600 800 U V B AC 0.2 200 400 600 800 U V B AC 0 0 0.2 0.4 0.6 0.8 1.0 I I B N 371
URM URM Rated Voltage Rated Breaking Test Class [Un] Capacity Voltage ar 690V AC 100kA 690V AC IEC 60 269-4 VDE 0636 Part 40 Size NH3 Rated Current I n [A] 315 355 400 450 500 550 630 710 800 w/combi- Indicator w/combi- Indicator and Fitting for and Fitting for Microswitch Microswitch Article Number Article Number 2021320.315 2021320.355 2021320.400 2021320.450 2021320.500 2021320.550 2021320.630 2021320.710 2021320.800 Weight [kg / 1] 0.65 0.88 Units per Package 3 Power Loss [W] 79 85 95 95 100 110 130 150 177 Pre-arcing Total I 2 t I 2 t * @ 690V AC [A 2 s] [A 2 s] 11 000 76 000 14 000 100 000 20 000 150 000 30 000 220 000 42 000 300 000 55 000 400 000 67 000 490 000 84 000 610 000 144 500 1 050 000 2021320 A max B C D E F G H I L 400A 2.95 / 75 1.02 / 26 2.56 / 65 2.10 / 53 2.32 / 59 0.24 / 6 2.36 / 60 3.27 / 83 0.55 / 14 5.90 / 150 Dimensions in / mm 450A 2.95 / 75 1.26 / 32 2.56 / 65 2.56 / 65 2.90 / 73.5 0.24 / 6 2.36 / 60 3.40 / 86 0.67 / 17 5.90 / 150 Accessories Fuse Bases Page Microswitch 2100501 Fuse Base, 1 - Pole 386 2800202 Standard Level (Red Hammer) Page 387 372
URM URM Rated Voltage Rated Breaking Test Class [Un] Capacity Voltage ar 690V AC 100kA 690V AC IEC 60 269-4 VDE 0636 Part 40 Size NH3 Coefficients for Heavy Duty Applications a A2 B1 B2 Cf3 130 0.6 1.3 0.6 0.8 Cut-Off current Characteristics Time-Current Characteristics Cut-Off Current - Peak [ka] Virtual Pre-arcing time - [s] Prospective Short Circuit Current [ka] (Symmetrical r.m.s.) R.M.S. Prospective Current [A] Arc voltage diagram N21320-60_1 Reduction factor Reduction factor for for I 2 t total power loss 1500 1.2 1.0 U L V AC 1300 1100 K B 1.0 0.8 0.8 K w 0.6 900 0.6 0.4 700 0.4 0.2 500 200 400 600 800 U V B AC 0.2 200 400 600 800 U V B AC 0 0 0.2 0.4 0.6 0.8 1.0 I I B N 373
URM URM Rated Voltage Rated Breaking Test [Un] Capacity Voltage 1000V AC 100kA 1000V AC Class gr50a ar63a IEC 60 269-4 VDE 0636 Part 40 Size NH0 Rated w/combi- Indicator Current and Fitting for I n Microswitch [A] Article Number 16 20 25 32 40 50 63 80 100 125 160 2038404.16 2038404.20 2038404.25 2038404.32 2038404.40 2038404.50 2038404.63 2038404.80 2038404.100 2038404.125 2038404.160 gr gr gr gr gr gr ar ar ar ar ar Weight [kg/1] 0.24 Units per Package 6 Power Pre-arcing Total Loss I 2 t I 2 t * @ 1000V AC [W] [A 2 s] [A 2 s] 6.8 10 50 8 17 100 9 29 180 12 52 340 14 120 600 19 210 1 100 21 320 1 700 23 700 3 300 27 1 100 6 500 32 2 300 14 000 42 4 500 20 000 2038404 A max B C D E F G H I L Dimensions in / mm 2.80 / 71.5 0.60 / 15 2.56 / 65 1.16 / 29.5 1.80 / 46 0.24 / 6 1.38 / 35 2.28 / 58 0.50 / 13 4.92 / 125 Accessories Fuse Bases Page Microswitch 2138401 Fuse Base, 1 - Pole Contact 2800202 SIBA Standard Level (Red Hammer) Page 387 374
URM URM Rated Voltage Rated Breaking Test [Un] Capacity Voltage 1000V AC 100kA 1000V AC Class gr50a ar63a IEC 60 269-4 VDE 0636 Part 40 Size NH0 Coefficients for Heavy Duty Applications a A2 B1 B2 Cf3 130 0.6 1.3 0.6 0.8 Cut-Off current Characteristics Time-Current Characteristics Cut-Off Current - Peak [ka] Virtual Pre-arcing time - [s] Prospective Short Circuit Current [ka] (Symmetrical r.m.s.) Arc voltage diagram N38404-60_1 Reduction factor for I 2 t total R.M.S. Prospective Current [A] Reduction factor for power loss 2000 1.2 1.0 U L V AC 1800 1600 K B 1.0 0.8 K w 0.8 0.6 1400 0.6 0.4 1200 0.4 0.2 1000 500 700 900 1100 UB V AC 0.2 500 700 900 1100 U V B AC 0 0 0.2 0.4 0.6 0.8 1.0 I I B N 375
URM URM Rated Voltage Rated Breaking Test Class [Un] 660V AC Capacity 120kA Voltage 660V AC gr IEC 60 269-4 VDE 0636 Part 40 Size NH3 Rated w/combi- Indicator Power Pre-arcing Total Current and Fitting for Loss I 2 t I 2 t * I n Microswitch @ 660V AC [A] Article Number [W] [A 2 s] [A 2 s] 150 2037304.150 35 2 100 20 000 200 2037304.200 56 3 800 36 000 250 2037304.250 69 6 700 65 000 300 2037304.300 78 10 000 102 000 350 2037304.350 84 14 000 145 000 400 2037304.400 97 19 000 185 000 500 2037304.500 114 27 000 280 000 Weight [kg / 1] 0.83 Units per Package 6 2037304 A max B C D E F G H I J K L Dimensions in / mm 2.95 / 75 1.26 / 32 2.56 / 65 2.56 / 65 2.90 / 73.5 0.24 / 6 2.36 / 60 3.40 / 86 0.67 / 17 0.43 / 11 4.20 / 107 5.47 / 139 Accessories Fuse Bases Page Microswitch Page 2132301 Fuse Base, 1 - Pole 387 2800201 Standard Level (Black Hammer) 387 376
URM URM Rated Voltage [Un] 660V AC Rated Breaking Test Class Capacity Voltage gr 120kA 660V AC IEC 60 269-4 VDE 0636 Part 40 Size NH3 Coefficients for Heavy Duty Applications a A2 B1 B2 Cf3 130 0.55 1.25 0.6 0.8 Cut-Off current Characteristics Time-Current Characteristics Cut-Off Current - Peak [ka] Virtual Pre-arcing time - [s] Prospective Short Circuit Current [ka] (Symmetrical r.m.s.) N37304-60_1 R.M.S. Prospective Current [A] Arc voltage Reduction factor Reduction factor for diagram for I 2 t total power loss 1500 1.2 1.0 UL VAC 1300 1100 K B 1.0 0.8 K w 0.8 0.6 900 0.6 0.4 700 0.4 0.2 500 200 400 600 800 U V B AC 0.2 200 400 600 800 U V B AC 0 0 0.2 0.4 0.6 0.8 1.0 I I B N 377
URM URM Rated Voltage [Un] 1000V AC Rated Breaking Test Capacity Voltage 100kA 1000V AC Class ar IEC 60 269-4 VDE 0636 Part 40 Size NH3 Rated Current I n [A] 100 125 160 200 224 250 315 355 400 450 500 w/combiindicator and Fitting for Microswitch Article Number 2040704.100 2040704.125 2040704.160 2040704.200 2040704.224 2040704.250 2040704.315 2040704.355 2040704.400 2040704.450 2040704.500 Weight [kg / 1] 1.1 Units per Package 1 Power Loss [W] 28 34 36 41 45 49 73 77 79 82 87 Pre-arcing I 2 t [A 2 s] 2 100 2 900 4 100 5 600 6 700 10 000 34 000 51 000 60 000 74 000 125 000 Total I 2 t * @ 1000V AC [A 2 s] 5 800 8 900 12 800 18 000 21 500 31 000 97 000 152 000 180 000 220 000 370 000 2040704 A max B C D E F G H I J K L Dimensions in / mm 3.74 / 95 1.26 / 32 3.35 / 85 2.40 / 61 2.72 / 69 0.24 / 6 2.36 / 60 3.20 / 81.5 0.50 / 13 0.43 / 11 5.00 / 127 6.30 / 160 Accessories Fuse Bases Page Microswitch 2800202 Standard Level (Red Hammer) Page 387 378
URM URM Rated Voltage Rated Breaking Test Class [Un] Capacity Voltage ar 1000V AC 100kA 1000V AC IEC 60 269-4 VDE 0636 Part 40 Size NH3 Coefficients for Heavy Duty Applications a A2 B1 B2 Cf3 130 0.55 1.3 0.6 0.8 Cut-Off current Characteristics Time-Current Characteristics Cut-Off Current - Peak [ka] Virtual Pre-arcing time - [s] Prospective Short Circuit Current [ka] (Symmetrical r.m.s.) N40704-60_1 R.M.S. Prospective Current [A] Arc voltage Reduction factor Reduction factor for diagram for I 2 t total power loss 2000 1.2 1.0 1600 1.0 0.8 U L V AC 1200 K B 0.8 K w 0.6 800 0.6 0.4 400 0.4 0.2 0 100 500 900 1300 U V B AC 0.2 100 500 900 1300 U V B AC 0 0 0.2 0.4 0.6 08 1.0 I I B N 379
URM URM Rated Voltage Rated Breaking Test Class [Un] Capacity Voltage ar 2000V AC 100kA 2000V AC IEC 60 269-4 VDE 0636 Part 40 Size NH3 Rated w/combi- Indicator Power Pre-arcing Total Current and Fitting for Loss I 2 t I 2 t * I n Microswitch @ 2000V AC [A] Article Number [W] [A 2 s] [A 2 s] 200 224 250 2040404.200 2040404.224 2040404.250 78 85 103 21 000 27 000 33 000 60 000 77 000 95 000 300 2040404.300 115 53 000 151 000 315 2040404.315 121 62 000 172 000 355 2040404.355 135 94 000 280 000 400 450 2040404.400 2040404.450 145 153 130 000 159 000 410 000 520 000 Weight [kg / 1] 1.7 Units per Package 1 2040404 A max B C D E F G H I J K L Dimensions in / mm 7.10 / 180 1.26 / 32 6.50 / 165 2.40 / 61 2.72 / 69 0.24 / 6 2.36 / 60 3.40 / 86 0.50 / 13 0.43 / 11 8.20 / 208 9.45 / 240 Accessories Fuse Bases Page Microswitch Page 2800202 Standard Level (Red Hammer) 387 380
URM URM Size NH3 Rated Voltage Rated Breaking Test Class [Un] Capacity Voltage ar 2000V AC 100kA 2000V AC Coefficients for Heavy Duty Applications a A2 B1 B2 Cf3 130 0.65 1.25 0.65 0.8 IEC 60 269-4 VDE 0636 Part 40 Cut-Off current Characteristics Time-Current Characteristics Cut-Off Current - Peak [ka] Virtual Pre-arcing time - [s] Prospective Short Circuit Current [ka] (Symmetrical r.m.s.) R.M.S. Prospective Current [A] 4000 N40404-60_1 Arc voltage Reduction factor Reduction factor for diagram for I 2 t total power loss 1.2 1.0 3500 1.0 0.8 U L K B K w VAC 3000 0.8 0.6 2500 0.6 0.4 2000 0.4 0.2 1500 0 1000 2000 3000 U V B AC 0.2 0 1000 2000 3000 U V B AC 0 0 0.2 0.4 0.6 0.8 1.0 I I B N 381
URM URM Rated Voltage 690V AC -IEC Accessories DIN 43620 Size NH000/00 Fuse Bases IEC 60 269-2 Fuse Fuse Base Rated Rated Power Weight Units External Wall Partition Wall Size Current Acceptance per 000 / 00 Article No. [A] [W] [kg/1] Package Article No. Article No. Contact Covers 1 - Pole 2100101 0.44 2500103.2 160 12 1 2500101 3 - Pole 2100103 0.81 Insulating 2100101-1 Pole 2500101 M8x20 2500103.2 2100103-3 Pole with two partition walls Maximum Torque Fuse base mounting - 12N m Cable connection - 12N m 382
URM URM Rated Voltage 690V AC -IEC Accessories DIN 43620 Size NH0 Fuse Bases IEC 60 269-2 Fuse Fuse Base Rated Rated Power Weight Units External Wall Partition Wall Insulating Size Current Acceptance per 0 Article No. [A] [W] [kg/1] Package Article No. Article No. Contact Covers 1 - Pole 2100204 160 25 1 2100204 Maximum Torque Fuse base mounting - 12N m Cable connection - 12N m 383
URM URM Size NH1 Rated Voltage 690V AC -IEC Accessories Fuse Bases DIN 43620 IEC 60 269-2 Fuse Fuse Base Rated Rated Power Weight Units External Wall Partition Wall Insulating Size Current Acceptance per Contact Covers 1 Article No. [A] [W] [kg/1] Package Article No. Article No. Article No. 1 - Pole 2100301 0.72 2100303.30 250 32 1 2500301 3 - Pole 2100303 2.31 2100301.26 Parallel installation of single pole fuse bases, distance between centers 58mm. M10x30 2500301 2100301 M10x30 2100303.30 2100303 with two partition walls Maximum Torque Fuse base mounting - 20N m Cable connection - 32N m 2100301.26 384
URM URM Size NH2 Rated Voltage 690V AC -IEC Accessories Fuse Bases DIN 43620 IEC 60 269-2 Fuse Fuse Base Rated Rated Power Weight Units External Wall Partition Wall Insulating Size Current Acceptance per 2 Article No. [A] [W] [kg/1] Package Article No. Article No. Contact Covers 1 - Pole 2100401 0.88 400 45 3 - Pole 2100403 3.15 1 2500401 2100401.26 Parallel installation of single pole fuse bases, distance between centers 65mm. 2500401 2100401 M10x30 2100403 with two partition walls Maximum Torque Fuse base mounting - 20N m Cable connection - 32N m 2100401.26 385
URM URM Size NH3 Rated Voltage 690V AC -IEC Accessories Fuse Bases DIN 43620 IEC 60 269-2 Fuse Fuse Base Rated Rated Power Weight Units External Wall Partition Wall Insulating Size Current Acceptance per 3 Article No. [A] [W] [kg/1] Package Article No. Article No. Contact Covers 1 - Pole 2100501 630 60 1.16 1 2500501 2100501.26 Parallel installation of single pole fuse bases, distance between centers 75mm. 2500501 2100501 Maximum Torque Fuse base mounting - 20N m Cable connection - 32N m 2100501.26 386
URM URM E186970 Mounting Rated Voltage Rated Current Interrupt Weight Dimensions Centers IEC / UL IEC / UL withstand current Article Number [mm] [V] [A] [ka] [kg / 1] [in/mm] 2132301 630 / 630 1.22 2132301 2132302 110 1400 / 1200 200 2132302 1250 / 1250 1.26 A 7.10 /180 7.10 /180 B 3.35 / 85 3.35 / 85 C 0.63 / 16 0.63 / 16 D 0.83 /21 0.83 /21 E 4.33 / 110 4.33 / 110 F 0.30 / 8 0.30 / 8 G 1.80 / 46 1.80 / 46 H(Size 1) 5.00 / 127 5.00 / 127 H(Size 2) 5.12 / 130 5.12 / 130 H(Size 3) 5.40 / 137 5.40 / 137 I 0.35 / 9 0.35 / 9 J(Size 1) 4.10 / 104 4.10 / 104 J(Size 2) 4.25 / 108 4.25 /108 J(Size 3) 4.53 / 115 4.53 / 115 K 0.98 / 25 0.98 / 25 2132301 2132302 L max 8.07 / 205 8.07 / 205 M / M10 / M10 E186970 N 2.36 / 60 2.36 / 60 O 1.57 /40 1.57 /40 Nut Torque Max - 48N m / 35.3lb ft Base Torque Max - 15N m / 41.3.3lb in Article Number 2800201 2800202 2800203 2800204 Weight [kg / 1] 0.02 Units per Package 10 Accessories Fuse Modules GL - Microswitch Standard Level DIN43635 IEC 60269-4-1 Sec 1B Insulating Change Interrupt Rating Voltage Over AC DC [V] Circuits [V] [A] [V] [A] 5(resistive) 33 3(resistive) 1 250 3(inductive) 26 3(inductive L/R =10ms) 1 5V AC 5V DC Low Level Minimum 1mA(resistive) Interrupt Rating Maximum 30V AC 0.3A 30V DC 2800202 / 2800204 (Red Hammer) 2800201 / 2800203 (Black Hammer) 387
URS URS Fuses for Semiconductor Protection North American and European Standard Type - SQB Sizes 1, 2, 3, and 4 SIBA square body fuses type SQB are available in four body sizes. SQB sizes 1 thru 3 are available in various mounting styles, voltage and current ratings to the maximum flexibility in equipment design to meet global application requirements. SIBA SQB fuses provides superior engineered design for the protection of today's power semiconductors. The special shapes and forms of the pure silver melting elements embedded in a silicated arc quenching medium provides excellent low I 2 t value, low peak let thru currents, high current interrupting ratings with superb reliability under high cyclic loading conditions. Class: Voltage Ratings: Current Ratings: ar 700V AC, 1300V AC, 2000V AC and 2500V AC 50A - 4000A Standards: UL 248-13 IEC 60269-4 DIN VDE 0636-40 DIN 43653 Approvals: Tested at: Features and Benefits UL - 1.0xU n IEC - 1.1xU n E180276 U n 700V AC /1300V AC 690V AC /1250V AC High current interrupt ratings Very low I 2 t total values High cyclic loading withstand capabilities 388
URS Fuses for Semiconductor Protection Selection Guide North American and European Standard Type - SQB Sizes 1, 2, 3, and 4 Article Description Selection Guide Technical Data 690V AC IEC / 700V AC UL SQB1 2061632 US Bladed-Short 2061832 US Bladed-Long With fitting for micro-switch 392-393 2066432 2061232 Threaded 5/16" UNC DIN - 80mm 396-397 2061532 DIN - 110mm With fitting for micro-switch 394-395 2066132 DIN Threaded M8 SQB2 2062632 US Bladed-Short 2062832 US Bladed-Long With fitting for micro-switch 398-399 2067432 2062232 Threaded 3/8" UNC DIN - 80mm 402-403 2062532 DIN - 110mm With fitting for micro-switch 400-401 2067132 DIN Threaded M10 SQB2X2 (Double Body) 2067832 DIN Threaded M10 With fitting for micro-switch 404 SQB3 405 2063632 US Bladed-Short 2063832 US Bladed-Long With fitting for micro-switch 406-407 2068432 2063232 Threaded 1/2" UNC DIN - 80mm 410-411 2063532 DIN - 110mm With fitting for micro-switch 408-409 2068132 DIN Threaded M12 SQB3-70 2068152 DIN Threaded M12 With fitting for micro-switch 412 413 389
URS Fuses for Semiconductor Protection Selection Guide North American and European Standard Type - SQB Sizes 1, 2, 3, and 4 Article Description Selection Guide Technical Data 690V AC IEC / 700V AC UL SQB3X2 (Double Body) 2068832 DIN Threaded M12 With fitting for micro-switch 414 415 SQB4 2069532 DIN Threaded M10 With fitting for micro-switch 416 417 1250V AC IEC / 1300V AC UL SQB1 2071832 2076432 2071532 2076132 US Bladed-Long Threaded 5/16" UNC DIN - 110mm DIN Threaded M8 With fitting for micro-switch With fitting for micro-switch 418-419 420-421 422-423 SQB2 2072832 US Bladed-Long With fitting for micro-switch 424-425 2077432 Threaded 3/8" UNC 2072532 DIN - 110mm With fitting for micro-switch 426-427 2077132 DIN Threaded M10 SQB2X2 (Double Body) 2077832 DIN Threaded M10 With fitting for micro-switch 430 SQB3 428-429 431 2073832 US Bladed-Long No blown fuse indication 432-433 2078432 Threaded 1/2" UNC 436-437 2073532 DIN - 110mm No blown fuse indication 434-435 2078132 DIN Threaded M12 SQB3-70 2078152 DIN Threaded M12 With fitting for micro-switch 438 439 SQB3X2 (Double Body) 2078832 DIN Threaded M12 With fitting for micro-switch 440 441 SQB4 2079532 DIN Threaded M10 With fitting for micro-switch 442 Contact SIBA 2000V IEC SQB3 2075332 DIN Threaded M12 With fitting for micro-switch 443 Contact SIBA 2500V IEC SQB3 2079152 DIN Threaded M12 With fitting for micro-switch 444 445 390
URS Fuse Accessories for Semiconductor Protection Selection Guide North American and European Standard Type - SQB Sizes 1, 2, 3, and 4 Article Description Fuse Base Selection Guide Technical Data UL E186970 2131301 2131302 2132301 2132302 80mm mounting centers 80mm mounting centers 110mm mounting centers 110mm mounting centers 630A, 900V - IEC / 700V - UL 1250A, 900V - IEC / 700V - UL 630A, 1400V - IEC / 1200V - UL 1250A, 1400V - IEC / 1200V - UL 446-447 UL E35113 9990001 2800104 2801104 2800310 2800311 2800312 2800320 2800321 2800322 2800410 2800411 2800412 2800420 2800421 2800422 Standard Level Low Level Standard Level Low Level Fuse Standoff 1400A, 1000V - UL Microswitches B-Microswitch Single Change Over Circuit M-Microswitch Single Change Over Circuit Double Change Over Circuit Single Change Over Circuit Double Change Over Circuit 447 448-449 448-449 391
URS URS Rated Voltage 690V AC /600V AC E180276 700V AC Size SQB1 - North American Rated Breaking Test Class Capacity Voltage ar 200kA IEC - 1.1Un UL - 1.0Un UL 248-13 IEC 60269-4 DIN VDE 0636-40 Rated US-Blade Short US-Long Long US-Threaded 5/16" UNC Current With fitting for microswitch With fitting for microswitch With fitting for microswitch I n UL UL UL [A] Article Number rec Article Number rec Article Number rec 50 2061632.50 2061832.50 2066432.50 63 2061632.63 2061832.63 2066432.63 80 2061632.80 2061832.80 2066432.80 100 2061632.100 2061832.100 2066432.100 125 2061632.125 2061832.125 2066432.125 160 2061632.160 2061832.160 2066432.160 200 2061632.200 2061832.200 2066432.200 250 2061632.250 2061832.250 2066432.250 315 2061632.315 2061832.315 2066432.315 350 2061632.350 2061832.350 2066432.350 400 2061632.400 2061832.400 2066432.400 450 2061632.450 2061832.450 2066432.450 500 2061632.500 2061832.500 2066432.500 550 2061632.550 2061832.550 2066432.550 630 2061632.630 2061832.630 2066432.630 700 2061632.700 2061832.700 2066432.700 800 2061632.800 2061832.800 2066432.800 900 2061632.900* 2061832.900* 2066432.900* * Rated 600Vac - IEC Weight [kg / 1] 0.52 0.52 0.52 0.52 0.50 0.50 Units per Package 3 3 3 3 3 3 Accessories Microswitch 2800104 2801104 Standard Low level E309038 Page 448-449 Page 392
URS URS Rated Voltage 690V AC /600V AC E180276 700V AC Size SQB1 - North American Rated Breaking Test Capacity Voltage 200kA IEC - 1.1Un UL - 1.0Un Class ar UL 248-13 IEC 60269-4 DIN VDE 0636-40 US-Blade Short US-Long Long US-Threaded 5/16" UNC With fitting for microswitch With fitting for microswitch With fitting for microswitch A B C D E 1 E 2 F G H L M Torque Max 2061632 2061832 2066432 1.87 / 47.5 1.02 / 26 0.55 / 14 2.00 / 51 4.29 / 109 2.87 / 73 0.24 / 6 2.60 / 66 3.50 / 89 5.28 / 134 Dimensions [in / mm] 1.87 / 47.5 1.02 / 26 0.55 / 14 2.00 / 51 5.04 / 128 3.62 / 92 0.24 / 6 2.60 / 66 3.50 / 89 6.06 / 154 1.87 / 47.5 0.94 / 24 2.00 / 51 2.60 / 66 3.50 / 89 2.00 / 51 5/16-UNC - Thread Depth 0.43 / 11 22N m / 16.2lb ft 2061632 / 2061832 2066432 393
URS URS E180276 Size SQB1 - DIN 43653 Rated Current I n 80mm With fitting for microswitch Rated Voltage 690V AC /600V AC 700V AC Rated Breaking Test Capacity Voltage IEC - 1.1Un 200kA UL - 1.0Un 110mm With fitting for microswitch Class ar UL 248-13 IEC 60269-4 VDE 0636- Part 40 M8 With fitting for microswitch UL UL UL [A] Article Number rec Article Number rec Article Number rec 50 2061232.50 2061532.50 2066132.50 63 2061232.63 2061532.63 2066132.63 80 2061232.80 2061532.80 2066132.80 100 2061232.100 2061532.100 2066132.100 125 2061232.125 2061532.125 2066132.125 160 2061232.160 2061532.160 2066132.160 200 2061232.200 2061532.200 2066132.200 250 2061232.250 2061532.250 2066132.250 315 2061232.315 2061532.315 2066132.315 350 2061232.350 2061532.350 2066132.350 400 2061232.400 2061532.400 2066132.400 450 2061232.450 2061532.450 2066132.450 500 2061232.500 2061532.500 2066132.500 550 2061232.550 2061532.550 2066132.550 630 2061232.630 2061532.630 2066132.630 700 2061232.700 2061532.700 2066132.700 800 2061232.800 2061532.800 2066132.800 900 2061232.900* 2061532.900* 2066132.900* * Rated 600Vac - IEC Weight [kg / 1] 0.51 0.51 0.51 0.51 0.50 0.50 Units per Package 3 3 3 3 3 3 Accessories E186970 Fuse Base 2131301 80mm center (900V) to 630A 2131302 80mm center (900V) to 1250A 2132301 110mm center (1400V) to 630A 2132302 110mm center (1400V) to 1250A Page 446-447 446-447 Microswitch 2800104 2801104 Standard Low level E309038 Page 448-449 394
URS URS Rated Breaking Test Class Rated Voltage Capacity Voltage ar UL 248-13 690V AC /600V AC IEC - 1.1Un IEC 60269-4 200kA E180276 700V AC UL - 1.0Un VDE 0636- Part 40 Size SQB1 - DIN 43653 80mm 110mm M8 With fitting for microswitch With fitting for microswitch With fitting for microswitch A B C D E F G H L M Torque Max 2061232 2061532 2066132 Dimensions [in / mm] 1.87 / 47.5 1.87 / 47.5 1.87 / 47.5 1.02 / 26 1.02 / 26 0.94 / 24 0.43 / 11 0.43 / 11 2.00 / 51 2.00 / 51 2.00 / 51 3.00 / 76 4.17 / 106 0.24 / 6 0.24 / 6 2.60 / 66 2.60 / 66 2.60 / 66 3.50 / 89 3.50 / 89 3.50 / 89 4.30 / 109 5.28 / 134 2.00 / 51 M8 - Thread Depth 0.43 / 11 22N m / 16.2lb ft 2061232 / 2061532 2066132 395
URS URS Rated Voltage 690V AC /600V AC E180276 700V AC Size SQB1 - North American/DIN Rated Current I n [A] 50 63 80 100 125 160 200 250 315 350 400 450 500 550 630 700 800 900 Rated Breaking Test Capacity Voltage 200kA IEC - 1.1Un UL - 1.0Un Class ar Rated Voltage[U n ] Rated Voltage[U n ] Power Loss Pre-arcing Total IEC 60269-4 UL 248-13 I 2 t I 2 t @ 660V AC [V] [V] [W] [A 2 s] [A 2 s] 690 700 12 110 590 690 700 19 160 850 690 700 24 260 1 400 690 700 30 420 2 300 690 700 35 600 3 100 690 700 40 1 400 7 500 690 700 44 2 400 13 000 690 700 51 3 700 21 000 690 700 59 6 600 39 000 690 700 61 9 900 55 000 690 700 65 17 000 96 000 690 700 70 22 000 130 000 690 700 72 31 000 180 000 690 700 75 41 000 250 000 690 700 80 61 000 370 000 690* 700 85 86 000 490 000 690* 700 99 120 000 750 000 600* 700 105 170 000 990 000 * Tested @ 1.05xU n UL 248-13 IEC 60269-4 VDE 0636- Part 40 396
URS URS Rated Breaking Test Class Rated Voltage Capacity Voltage ar UL 248-13 690V AC /600V AC IEC - 1.1Un IEC 60269-4 200kA E180276 700V AC UL - 1.0Un VDE 0636- Part 40 Size SQB1 - North American/DIN Coefficients for Heavy Duty Applications a A2 B1 B2 Cf3 130 0.6 1.25 0.6 0.8 Cut-Off current Characteristics Time-Current Characteristics Cut-Off Current - Peak [ka] Virtual Pre-arcing time - [s] Prospective Short Circuit Current [ka] (Symmetrical r.m.s.) R.M.S. Prospective Current [A] 1.2 1.0 b a 0.8 0.6 0.4 0.2 397
URS URS Rated Voltage 690V AC /600V AC E180276 700V AC Size SQB2 - North American Rated Current I n [A] 250 315 350 400 450 500 550 630 700 800 900 1000 1100 1250 Rated Breaking Test Capacity Voltage 200kA IEC - 1.1Un UL - 1.0Un US-Blade Short US-Long Long With fitting for microswitch With fitting for microswitch Class ar UL 248-13 IEC 60269-4 VDE 0636- Part 40 US-Threaded 3/8" UNC With fitting for microswitch UL UL UL Article Number rec Article Number rec Article Number rec 2062632.250 2062832.250 2067432.250 2062632.315 2062832.315 2067432.315 2062632.350 2062832.35 2067432.350 2062632.400 2062832.400 2067432.400 2062632.450 2062832.450 2067432.450 2062632.500 2062832.500 2067432.500 2062632.550 2062832.550 2067432.550 2062632.630 2062832.630 2067432.630 2062632.700 2062832.700 2067432.700 2062632.800 2062832.800 2067432.800 2062632.900 2062832.900 2067432.900 2062632.1000 2062832.1000 2067432.1000 2062632.1100* 2062832.1100* 2067432.1100* 2062632.1250* 2062832.1250* 2067432.1250* * Rated 600Vac - IEC Weight [kg / 1] 0.60 0.60 0.60 0.60 0.50 0.50 Units per Package 3 3 3 3 3 3 Accessories Microswitch 2800104 2801104 Standard Low level E309038 Page 448-449 Page 398
URS URS Rated Breaking Test Rated Voltage Capacity Voltage 690V AC /600V AC IEC - 1.1Un 200kA E180276 700V AC UL - 1.0Un Size SQB2 - North American US-Blade Short US-Long Long With fitting for microswitch With fitting for microswitch Class ar UL 248-13 IEC 60269-4 VDE 0636- Part 40 US-Threaded 3/8" UNC With fitting for microswitch A B C D E 1 E 2 F G H L M Torque Max 2061632 2061832 1.87 / 47.5 1.02 / 26 0.55 / 14 2.36 / 60 4.29 / 109 2.87 / 73 0.24 / 6 2.95 / 75 3.86 / 98 5.28 / 134 Dimensions [in / mm] 1.87 / 47.5 1.02 / 26 0.55 / 14 2.36 / 60 5.04 / 128 3.62 / 92 0.24 / 6 2.95 / 75 3.86 / 98 6.06 / 154 2066432 1.87 / 47.5 0.94 / 24 2.36 / 60 2.95 / 75 3.86 / 98 2.00 / 51 3/8-UNC - Thread Depth 0.43 /11 39N m / 28.7lb ft 2062632 / 2062832 2067432 399
URS URS Rated Voltage 690V AC /600V AC E180276 700V AC Size SQB2 - DIN 43653 Rated Current I n [A] 250 315 350 400 450 500 550 630 700 800 900 1000 1100 1250 Rated Breaking Test Capacity Voltage 200kA IEC - 1.1Un UL - 1.0Un Class ar UL 248-13 IEC 60269-4 VDE 0636- Part 40 80mm 110mm M10 With fitting for microswitch With fitting for microswitch With fitting for microswitch UL UL UL Article Number rec Article Number rec Article Number rec 2062232.250 2062532.250 2067132.250 2062232.315 2062532.315 2067132.315 2062232.350 2062532.350 2067132.350 2062232.400 2062532.400 2067132.400 2062232.450 2062532.450 2067132.450 2062232.500 2062532.500 2067132.500 2062232.550 2062532.550 2067132.550 2062232.630 2062532.630 2067132.630 2062232.700 2062532.700 2067132.700 2062232.800 2062532.800 2067132.800 2062232.900 2062532.900 2067132.900 2062232.1000 2062532.1000 2067132.1000 2062232.1100* 2062532.1100* 2067132.1100* 2062232.1250* 2062532.1250* 2067132.1250* * Rated 600Vac - IEC Weight [kg / 1] 0.51 0.51 0.51 0.51 0.50 0.50 Units per Package 3 3 3 3 3 3 Accessories E309038 Fuse Base Page Microswitch 2131301 80mm center (900V) to 630A 2800104 Standard 446-447 2131302 80mm center (900V) to 1250A 2801104 Low level 2132301 110mm center (1400V) to 630A 446-447 2132302 110mm center (1400V) to 1250A E309038 Page 448-449 400
URS URS Rated Breaking Test Rated Voltage Capacity Voltage 690V AC /600V AC IEC - 1.1Un 200kA E180276 700V AC UL - 1.0Un Size SQB2 - DIN 43653 80mm 110mm With fitting for microswitch With fitting for microswitch Class ar UL 248-13 IEC 60269-4 VDE 0636- Part 40 M10 With fitting for microswitch A B C D E F G H L M Torque Max 2062232 2062532 Dimensions [in / mm] 1.87 / 47.5 1.87 / 47.5 1.02 / 26 1.02 / 26 0.43 / 11 0.43 / 11 2.36 / 60 2.36 / 60 3.00 / 76 4.17 / 106 0.24 / 6 0.24 / 6 2.95 / 75 3.86 / 98 4.30 / 109 2.95 / 75 3.86 / 98 5.28 / 134 2067132 1.87 / 47.5 0.94 / 24 2.36 / 60 2.95 / 75 3.86 / 98 2.00 / 51 M10 - Thread Depth 0.43 / 11 39N m / 28.7lb ft 2062232 / 2062532 2067132 401
URS URS Rated Voltage 690V AC /600V AC E180276 700V AC Size SQB2 - North American/DIN Rated Current Rated Voltage[U n ] Rated Voltage[U n ] Rated Breaking Test Capacity Voltage 200kA IEC - 1.1Un UL - 1.0Un Power Loss Pre-arcing Class ar Total UL 248-13 IEC 60269-4 VDE 0636- Part 40 I n [A] 250 315 350 400 450 500 550 630 700 800 900 1000 1100 1250 IEC 60269-4 [V] UL 248-13 [V] [W] I 2 t [A 2 s] I 2 t @ 660V AC [A 2 s] 690 50 5 600 32 000 690 56 7 800 45 000 690 61 11 800 68 000 690 700 65 13 000 75 000 690 700 75 18 000 110 000 690 700 80 26 000 150 000 690 700 85 36 000 195 000 690 700 94 55 000 300 000 690 700 99 74 000 410 000 690 700 108 100 000 580 000 690* 700 111 170 000 950 000 690* 600 115 230 000 1 260 000 600* 600 130 290 000 1 600 000 600* 140 370 000 2 140 000 * Tested @ 1.05xU n 402
URS URS Rated Voltage 690V AC /600V AC E180276 700V AC Size SQB2 - North American/DIN Rated Breaking Test Capacity Voltage 200kA IEC - 1.1Un UL - 1.0Un Class ar UL 248-13 IEC 60269-4 VDE 0636- Part 40 Coefficients for Heavy Duty Applications a A2 B1 B2 Cf3 130 0.6 1.25 0.6 0.8 Cut-Off current Characteristics Time-Current Characteristics Cut-Off Current - Peak [ka] Virtual Pre-arcing time - [s] Prospective Short Circuit Current [ka] (Symmetrical r.m.s.) R.M.S. Prospective Current [A] 1.2 1.0 b a 0.8 0.6 0.4 0.2 403
URS URS Rated Voltage 690V AC Rated Breaking Test Capacity Voltage 200kA IEC - 1.1Un Class ar IEC 60269-4 VDE 0636- Part 40 Size SQB2x2 - DIN 43653 Rated Current With fitting for Rated Voltage[U n ] Rated Voltage[U n ] Power Loss Pre-arcing Total I n microswitch IEC 60269-4 UL 248-13 I 2 t I 2 t @ 660V AC [A] Article Number [V] [V] [W] [A 2 s] [A 2 s] 800 2067832.800 690 136 52 000 300 000 1000 2067832.1000 690 168 104 000 600 000 1250 2067832.1250 690 197 220 000 1 200 000 1400 2067832.1400 690 208 296 000 1 264 000 1600 2067832.1600 690 229 400 000 2 320 000 Weight [kg / 1] 1.28 Units per Package For DC Application see pages 402 1 2067832 Dimensions [in / mm] A 1.87 / 47.5 B 1.77 / 45 C 0.43 / 11 D 2.32 / 59 F 0.16 / 4 G 5.79 / 147 H 6.69 / 170 I 2.83 / 72 J 1.90 / 48 K 2.64 / 67 L M 2.00 / 51 M10 - Thread Depth 0.43 / 11 Torque Max - 39N m / 28.7lb ft Accessories Microswitch 2800104 2801104 Standard Low level E309038 Page 448-449 Page 404
URS URS Rated Voltage 690V AC Rated Breaking Test Capacity Voltage 200kA IEC - 1.1Un Class ar IEC 60269-4 VDE 0636- Part 40 Size SQB2x2 - DIN 43653 Coefficients for Heavy Duty Applications a A2 B1 B2 Cf3 130 0.6 1.25 0.6 0.8 Cut-Off current Characteristics Time-Current Characteristics Cut-Off Current - Peak [ka] Virtual Pre-arcing time - [s] Prospective Short Circuit Current [ka] (Symmetrical r.m.s.) R.M.S. Prospective Current [A] 1.2 1.0 b a 0.8 0.6 0.4 0.2 405
URS URS Rated Voltage 690V AC /600V AC E180276 700V AC Size SQB3 - North American Rated Current I n [A] 500 550 630 700 800 900 1000 1100 1250 1400 1500 1600 US-Blade Short With fitting for microswitch 3 Article Number 2063632.500 2063632.550 2063632.630 2063632.700 2063632.800 2063632.900 2063632.1000 2063632.1100 2063632.1250 2063632.1400 2063632.1500* 2063632.1600* 0.80 0.80 3 Rated Breaking Test Capacity Voltage 200kA IEC - 1.1Un UL - 1.0Un Class ar UL 248-13 IEC 60269-4 VDE 0636- Part 40 US-Long Long US-Threaded 1/2" UNC With fitting for microswitch With fitting for microswitch UL UL UL rec Article Number rec Article Number rec 2063832.500 2068432.500 2063832.550 2068432.550 2063832.630 2068432.630 2063832.700 2068432.700 2063832.800 2068432.800 2063832.900 2068432.900 2063832.1000 2068432.1000 2063832.1100 2068432.1100 2063832.1250 2068432.1250 2063832.1400 2068432.1400 2063832.1500* 2068432.1500* 2063832.1600* 2068432.1600* * Rated 600Vac - IEC Weight [kg / 1] 0.80 0.80 0.50 0.50 Units per Package 3 3 3 3 Accessories Microswitch 2800104 2801104 Standard Low level E309038 Page 448-449 Page 406
URS URS Rated Voltage 690V AC /600V AC E180276 700V AC Size SQB3 - North American US-Blade Short With fitting for microswitch Rated Breaking Test Capacity Voltage 200kA IEC - 1.1Un UL - 1.0Un US-Long Long With fitting for microswitch Class ar UL 248-13 IEC 60269-4 VDE 0636- Part 40 US-Threaded 1/2" UNC With fitting for microswitch A B C D E 1 E 2 F G H L M Torque Max 2063632 2063832 Dimensions [in / mm] 1.93 / 49 1.93 / 49 1.38 / 35 1.38 / 35 0.63 / 16 0.63 / 16 2.87 / 73 2.87 / 73 4.29 / 109 5.04 / 128 2.87 / 73 3.70 / 94 0.24 / 6 0.24 / 6 3.46 / 88 3.46 / 88 4.37 / 111 4.37 / 111 5.28 / 134 6.06 / 154 2068432 1.93 / 49 1.10 / 28 2.87 / 73 3.46 / 88 4.37 / 111 2.00 / 51 1/2-UNC - Thread Depth 0.47 / 12 52N m / 38.3lb ft 2063632 / 2063832 20 684 32 2068432 407
URS URS Rated Breaking Test Class Rated Voltage Capacity Voltage ar 690V AC /600V AC IEC - 1.1Un 200kA E180276 700V AC UL - 1.0Un Size SQB3 - DIN 43653 UL 248-13 IEC 60269-4 VDE 0636- Part 40 Rated 80mm 110mm M12 Current With fitting for microswitch With fitting for microswitch With fitting for microswitch I n UL UL UL [A] Article Number rec Article Number rec Article Number rec 500 2063232.500 2063532.500 2068132.500 550 2063232.550 2063532.550 2068132.550 630 2063232.630 2063532.630 2068132.630 700 2063232.700 2063532.700 2068132.700 800 2063232.800 2063532.800 2068132.800 900 2063232.900 2063532.900 2068132.900 1000 2063232.1000 2063532.1000 2068132.1000 1100 2063232.1100 2063532.1100 2068132.1100 1250 2063232.1250 2063532.1250 2068132.1250 1400 2063232.1400 2063532.1400 2068132.1400 1500 2063232.1500* 2063532.1500* 2068132.1500* 1600 2063232.1600* 2063532.1600* 2068132.1600* * Rated 600Vac - IEC Weight [kg / 1] 0.60 0.60 0.60 0.60 0.65 0.66 Units per Package 3 3 3 3 3 3 Accessories E309038 Fuse Base 2131301 80mm center (900V) to 630A 2131302 80mm center (900V) to 1250A 2132301 110mm center (1400V) to 630A 2132302 110mm center (1400V) to 1250A Page 446-447 446-447 Microswitch 2800104 2801104 Standard Low level E309038 Page 448-449 408
URS URS Rated Voltage 690V AC /600V AC E180276 700V AC Size SQB3 - DIN 43653 Rated Breaking Test Capacity Voltage 200kA IEC - 1.1Un UL - 1.0Un 80mm 110mm With fitting for microswitch With fitting for microswitch Class ar UL 248-13 IEC 60269-4 VDE 0636- Part 40 M12 With fitting for microswitch A B C D E F G H L M Torque Max 2063232 1.93 / 49 1.38 / 35 0.43 / 11 2.87 / 73 3.00 / 76 0.24 / 6 3.46 / 88 4.37 / 111 4.30 / 109 2063532 2068132 Dimensions [in / mm] 1.93 / 49 1.93 / 49 1.38 / 35 1.10 / 28 0.43 / 11 2.87 / 73 2.87 / 73 4.17 / 106 0.24 / 6 3.46 / 88 3.46 / 88 4.37 / 111 4.37 / 111 5.28 / 134 2.00 / 51 M12 - Thread Depth 0.47 / 12 52N m / 38.3lb ft 2063232 / 2063532 2068132 409
UR S URS Rated Voltage 690V AC /600V AC E180276 700V AC Size SQB3 - North American/DIN Rated Current I n [A] 500 550 630 700 800 900 1000 1100 1250 1400 1500 1600 Rated Breaking Test Capacity Voltage 200kA IEC - 1.1Un UL - 1.0Un Class ar Rated Voltage[U n ] Rated Voltage[U n ] Power Loss Pre-arcing Total IEC 60269-4 UL 248-13 I 2 t I 2 t @ 660V AC [V] [V] [W] [A 2 s] [A 2 s] 690 700 90 18 000 100 000 690 700 100 22 000 130 000 690 700 108 32 000 190 000 690 700 113 50 000 300 000 690 700 118 85 000 480 000 690 700 120 115 000 660 000 690 700 131 140 000 860 000 690 700 136 210 000 1 200 000 690* 700 147 290 000 1 750 000 690* 700 161 380 000 2 200 000 600* 171 490 000 3 000 000 600* 190 590 000 3 700 000 * Tested @ 1.05xU n UL 248-13 IEC 60269-4 VDE 0636- Part 40 410
URS URS Rated Voltage 690V AC /600V AC E180276 700V AC Size SQB3 - North American/DIN Rated Breaking Test Class Capacity Voltage ar UL 248-13 IEC - 1.1Un IEC 60269-4 200kA UL - 1.0Un VDE 0636- Part 40 Coefficients for Heavy Duty Applications a A2 B1 B2 Cf3 130 0.6 1.25 0.6 0.8 Cut-Off current Characteristics Time-Current Characteristics Cut-Off Current - Peak [ka] Virtual Pre-arcing time - [s] Prospective Short Circuit Current [ka] (Symmetrical r.m.s.) R.M.S. Prospective Current [A] 1.2 1.0 b a 0.8 0.6 0.4 0.2 411
URS URS Rated Voltage 550V AC /500V AC Rated Breaking Test Class Capacity Voltage ar IEC 60269-4 200kA IEC - 1.1Un VDE 0636- Part 40 Size SQB3-70 - DIN 43653 Rated Current I n [A] 1800 2000 2250 With fitting for microswitch Article Number 2068152.1800 2068152.2000 2068152.2250 Weight [kg / 1] 0.89 Units per Package 2 Rated Voltage[U n ] Rated Voltage[U n ] Power Loss Pre-arcing IEC 60269-4 UL 248-13 I 2 t [V] [V] [W] [A 2 s] 550 225 795 000 550 250 1 000 000 500 275 1 190 000 For DC Application see pages 410 Total I 2 t @ Rated Voltage [A 2 s] 3 720 000 4 950 000 6 000 000 A B D G H L M Dimensions [in / mm] 1.93 / 49 1.10 / 28 2.87 / 73 3.46 / 88 4.37 / 111 2.32 / 59 M12 - Thread Depth 0.47 / 12 Torque Max - 52N m / 38.3lb ft 20 681 52 Accessories Microswitch 2800104 2801104 Standard Low level E309038 Page 448-449 Page 412
URS URS Rated Breaking Test Class Rated Voltage Capacity Voltage ar 550V AC /500V AC 200kA IEC - 1.1Un IEC 60269-4 VDE 0636- Part 40 Size SQB3-70 - DIN 43653 Coefficients for Heavy Duty Applications a A2 B1 B2 Cf3 130 0.6 1.25 0.6 0.8 Cut-Off current Characteristics Time-Current Characteristics Cut-Off Current - Peak [ka] Virtual Pre-arcing time - [s] Prospective Short Circuit Current [ka] (Symmetrical r.m.s.) R.M.S. Prospective Current [A] 1.2 1.0 b a 0.8 0.6 0.4 0.2 413
URS URS Rated Breaking Test Class Rated Voltage Capacity Voltage ar 690V AC 200kA IEC - 1.1Un IEC 60269-4 VDE 0636- Part 40 Size SQB3x2 - DIN 43653 Rated Current With fitting for Rated Voltage[U n ] Rated Voltage[U n ] Power Loss Pre-arcing Total I n microswitch IEC 60269-4 UL 248-13 I 2 t I 2 t @ 660V AC [A] Article Number [V] [V] [W] [A 2 s] [A 2 s] 1000 2068832.1000 690 190 70 100 421 000 1100 2068832.1100 690 205 90 000 540 000 1250 2068832.1250 690 227 128 000 760 000 1400 2068832.1400 690 237 200 000 1 200 000 1600 2068832.1600 690 248 340 000 1 920 000 1800 2068832.1800 690 252 460 000 2 640 000 2000 2068832.2000 690 276 560 000 3 440 000 2500 2068832.2500 690* 310 1 160 000 7 000 000 2800 2068832.2800 690* 340 1 520 000 8 800 000 3000 2068832.3000 690* 359 1 960 000 12 000 000 Weight [kg / 1] *Tested at 1.05U n 1.7 Units per Package For DC Application see pages 410 1 2068832 Dimensions [in / mm] A B 1.93 / 49 1.97 / 50 C 0.50 / 13 D 2.87 / 73 F 0.16 / 4 G 6.85 / 174 H 7.76 / 197 I 3.39 / 86 J 2.13 / 54 K 2.64 / 67 L 2.00 / 51 M M12 - Thread Depth 0.47 / 12 Torque Max - 52N m / 38.3lb ft Accessories Microswitch 2800104 Standard 2801104 Low level E309038 Page 448-449 Page 414
URS URS Rated Breaking Test Class Rated Voltage Capacity Voltage ar 690V AC 200kA IEC - 1.1Un IEC 60269-4 Size SQB3x2 - DIN 43653 Coefficients for Heavy Duty Applications a A2 B1 B2 Cf3 130 0.6 1.25 0.6 0.8 Cut-Off current Characteristics Time-Current Characteristics Cut-Off Current - Peak [ka] Virtual Pre-arcing time - [s] Prospective Short Circuit Current [ka] (Symmetrical r.m.s.) R.M.S. Prospective Current [A] 1.2 1.0 b a 0.8 0.6 0.4 0.2 415
URS URS Rated Voltage 690V AC /400V AC Rated Breaking Test Class Capacity Voltage ar 100kA Un IEC 60269-4 Size SQB4 - DIN 43653 Rated Current With fitting for Rated Voltage[U n ] Rated Voltage[U n ] Power Loss Pre-arcing Total I n microswitch IEC 60269-4 UL 248-13 (@ 0.8xI n ) I 2 t I 2 t @ Rated Voltage [A] Article Number [V] [V] [W] [A 2 s] [A 2 s] 1250 2069532.1250 690 145 125 000 760 000 1600 2069532.1600 690 151 300 000 1 800 000 1800 2069532.1800 690 156 419 000 2 500 000 2000 2069532.2000 690 166 596 000 3 600 000 2200 2069532.2200 690 168 859 000 5 200 000 2500 2069532.2500 690 170 1 190 000 7 200 000 3000 2069532.3000 690* 192 2 080 000 12 100 000* 3500 2069532.3500 500 244 3 140 000 18 200 000 4000 2069532.4000 400 254 4 640 000 21 600 000 Weight [kg / 1] *Tested at 1.05U n 1.98 Units per Package 1 2069532 M Dimensions [in / mm] A 2.09 / 53 B 2.05 / 52 C 1.30 / 33 D 4.06 / 103 G 4.65 / 118 H 5.55 / 141 L 2.60 / 66 M M10 - Thread Depth 0.43 / 11 Torque Max - 39N m / 28.7lb ft C D G H B Press Pack Available Contact SIBA D Accessories A L Microswitch 2800104 2801104 Standard Low level E309038 Page 448-449 Page 416
URS URS Rated Voltage 690V AC /400V AC Rated Breaking Test Capacity Voltage 100kA Un Class ar IEC 60269-4 Size SQB4 - DIN 43653 Coefficients for Heavy Duty Applications a A2 B1 B2 Cf3 130 0.6 1.25 0.6 0.8 Time-Current Characteristics Virtual Pre-arcing time - [s] R.M.S. Prospective Current [A] 417
URS URS Rated Voltage 1250V AC /1000V AC E180276 1300V AC /1200V AC Size SQB1 - North American Rated Current I n [A] 50 63 80 100 125 160 200 250 315 350 400 450 500 550 630 700 Rated Breaking Test Capacity Voltage IEC - 1.1Un 120kA UL - 1.0Un US-Long Long US-Threaded 5/16" UNC With fitting for microswitch With fitting for microswitch UL Article Number rec Article Number 2071832.50 2076432.50 2071832.63 2076432.63 2071832.80 2076432.80 2071832.100 2076432.100 2071832.125 2076432.125 2071832.160 2076432.160 2071832.200 2076432.200 2071832.250 2076432.250 2071832.315 2076432.315 2071832.350 2076432.350 2071832.400 2076432.400 2071832.450 2076432.450 2071832.500* 2076432.500* 2071832.550* 2076432.550* 2071832.630* 2076432.630* 2071832.700** 20764 32.700** *Rated 1100V-IEC / 1200V-UL 248-13 **Rated 1000V-IEC Weight [kg / 1] 0.54 0.54 0.51 0.51 Units per Package 3 3 3 3 UL rec Class ar UL 248-13 IEC 60269-4 VDE 0636- Part 40 Accessories Microswitch 2800104 Standard 2801104 Low level E309038 Page 448-449 Page 418
URS URS Rated Breaking Test Class Rated Voltage Capacity Voltage ar UL 248-13 1250V AC /1000V AC IEC - 1.1Un IEC 60269-4 120kA E180276 1300V AC /1200V AC UL - 1.0Un VDE 0636- Part 40 Size SQB1 - North American US-Long Long US-Threaded 5/16" UNC With fitting for microswitch With fitting for microswitch A B 2071832 2.78 / 70.5 1.02 / 26 2.00 / 51 C 0.55 / 14 D E 1 5.20 / 132 E 2 3.78 / 96 F 0.24 / 6 G 2.60 / 66 H 3.50 / 89 L 6.18 / 157 M Torque Max Dimensions [in / mm] 2076432 2.78 / 70.5 0.94 / 24 2.00 / 51 2.60 / 66 3.50 / 89 2.90 / 73.5 5/16-UNC - Tread Depth 0.43 / 11 22N m / 16.2lb ft 2071832 2076432 419
URS URS Rated Breaking Test Class Rated Voltage Capacity Voltage ar 1250V AC /1000V AC IEC - 1.1Un 120kA E180276 1300V AC /1200V AC UL - 1.0Un Size SQB1 - DIN 43653 Rated 110mm M8 Current With fitting for microswitch With fitting for microswitch I n UL [A] Article Number rec Article Number 50 2071532.50 2076132.50 63 2071532.63 2076132.63 80 2071532.80 2076132.80 100 2071532.100 2076132.100 125 2071532.125 2076132.125 160 2071532.160 2076132.160 200 2071532.200 2076132.200 250 2071532.250 2076132.250 315 2071532.315 2076132.315 350 2071532.350 2076132.350 400 2071532.400 2076132.400 450 2071532.450 2076132.450 500 2071532.500* 2076132.500* 550 2071532.550* 2076132.550* 630 2071532.630* 2076132.630* 700 2071532.700** 2076132.700** *Rated 1100V-IEC / 1200V-UL 248-13 **Rated 1000V-IEC Weight [kg / 1] 0.54 0.54 0.51 0.51 Units per Package 3 3 3 3 UL rec UL 248-13 IEC 60269-4 VDE 0636- Part 40 Accessories E309038 Fuse Base Page Microswitch 2132301 110mm center (1400V) to 630A 2800104 Standard 446-447 2132302 110mm center (1400V) to 1250A 2801104 Low level E309038 Page 448-449 420
URS URS Rated Breaking Test Class Rated Voltage Capacity Voltage ar UL 248-13 1250V AC /1000V AC IEC - 1.1Un IEC 60269-4 120kA E180276 1300V AC /1200V AC UL - 1.0Un VDE 0636- Part 40 Size SQB1 - DIN 43653 110mm M8 With fitting for microswitch With fitting for microswitch A B C D E F G H L M Torque Max 2071532 2.78 / 70.5 1.02 / 26 0.43 / 11 2.00 / 51 4.17 / 106 0.24 / 6 2.60 / 66 3.50 / 89 5.43 / 138 Dimensions [in / mm] 2076132 2.78 / 70.5 0.94 / 24 2.00 / 51 2.60 / 66 3.50 / 89 2.90 / 73.5 M8 - Thread Depth 0.43 / 11 22N m / 16.2lb ft 2071532 2076132 421
URS URS Rated Voltage 1250V AC /1000V AC E180276 1300V AC /1200V AC Size SQB1 - North American/DIN Rated Breaking Test Capacity Voltage IEC - 1.1Un 120kA UL - 1.0Un Rated Current Rated Voltage[U n ] Rated Voltage[U n ] Power Loss Pre-arcing Class ar Total UL 248-13 IEC 60269-4 VDE 0636- Part 40 I n IEC 60269-4 UL 248-13 I 2 t I 2 t @ 1000V AC [A] [V] [V] [V] [W] [A 2 s] 50 1 250 1 300 29 130 730 63 80 1 250 1 250 1 300 1 300 32 35 250 410 1 400 2 300 1 250 1 300 38 930 5 200 1 300 41 1 400 7 800 100 125 160 200 250 280 315 350 400 450 500 550 630 700 1 250 1 250 1 300 45 2 500 14 000 1 250 1 300 49 4 600 25 000 1 250 1 300 58 8 400 46 000 1 250 1 300 60 12 500 64 000 1 250 1 300 67 15 000 81 000 1 250 1 300 70 22 000 120 000 1 250 1 300 75 36 000 200 000 1 250 1 300 80 44 000 250 000 1 100 1 200 87 66 000 340 000 1 100 1 200 94 83 000 430 000 1 100 1 200 99 126 000 670 000 1 000 105 181 000 962 000 422
URS URS Rated Voltage 1250V AC /1000V AC E180276 1300V AC /1200V AC Size SQB1 - North American/DIN Rated Breaking Test Capacity Voltage IEC - 1.1Un 120kA UL - 1.0Un Class ar UL 248-13 IEC 60269-4 VDE 0636- Part 40 Coefficients for Heavy Duty Applications a A2 B1 B2 Cf3 130 0.6 1.25 0.6 0.8 Cut-Off current Characteristics Time-Current Characteristics Cut-Off Current - Peak [ka] Virtual Pre-arcing time - [s] Prospective Short Circuit Current [ka] (Symmetrical r.m.s.) R.M.S. Prospective Current [A] 423
URS URS Rated Breaking Test Class Rated Voltage Capacity Voltage ar UL 248-13 1250V AC /1000V AC IEC - 1.1Un IEC 60269-4 120kA E180276 1300V AC /1200V AC UL - 1.0Un VDE 0636- Part 40 Size SQB2 - North American Rated US-Long Long US-Threaded 3/8" UNC Current With fitting for microswitch With fitting for microswitch I n UL [A] Article Number rec Article Number 250 2072832.250 2077432.250 280 2072832.280 2077432.280 315 2072832.315 2077432.315 350 2072832.350 2077432.350 400 2072832.400 2077432.400 450 2072832.450 2077432.450 500 2072832.500 2077432.500 550 2072832.550 2077432.550 630 2072832.630 2077432.630 700 2072832.700* 2077432.700* 800 2072832.800** 2077432.800** *Rated 1100V-IEC / 1200V-UL 248-13 **Rated 1100V-IEC / 1100V-UL 248-13 Weight [kg / 1] 0.75 0.75 0.73 0.73 Units per Package 3 3 3 3 UL rec Accessories Microswitch 2800104 Standard 2801104 Low level E309038 Page 448-449 Page 424
URS URS Rated Voltage 1250V AC /1000V AC E180276 1300V AC /1200V AC Size SQB2 - North American Rated Breaking Test Capacity Voltage IEC - 1.1Un 120kA UL - 1.0Un US-Long Long US-Threaded 3/8" UNC With fitting for microswitch With fitting for microswitch Class ar UL 248-13 IEC 60269-4 VDE 0636- Part 40 A B C D E 1 E 2 F G H L M Torque Max 2072832 2077432 Dimensions [in / mm] 2.78 / 70.5 1.02 / 26 0.55 / 14 2.36 / 60 5.20 / 132 3.78 / 96 0.24 / 6 2.95 / 75 3.86 / 98 6.18 / 157 2.78 / 70.5 0.94 / 24 2.36 / 60 2.95 / 75 3.86 / 98 2.90 / 73.5 3/8-UNC - Thread Depth 0.43 /11 39N m / 28.7lb ft 2072832 2077432 425
URS URS Rated Breaking Test Class Rated Voltage Capacity Voltage ar UL 248-13 1250V AC /1000V AC IEC - 1.1Un IEC 60269-4 120kA E180276 1300V AC /1200V AC UL - 1.0Un VDE 0636- Part 40 Size SQB2 - DIN 43653 Rated Current I n [A] 250 280 315 350 400 450 500 550 630 700 800 110mm M10 With fitting for microswitch With fitting for microswitch UL Article Number rec Article Number 2072532.250 2077132.250 2072532.280 2077132.280 2072532.315 2077132.315 2072532.350 2077132.350 2072532.400 2077132.400 2072532.450 2077132.450 2072532.500 2077132.500 2072532.550 2077132.550 2072532.630 2077132.630 2072532.700* 2077132.700* 2072532.800** 2077132.800** *Rated 1100V-IEC / 1200V-UL 248-13 **Rated 1100V-IEC / 1100V-UL 248-13 Weight [kg / 1] 0.75 0.75 0.73 0.73 Units per Package 3 3 3 3 UL rec Accessories E309038 Fuse Base Page Microswitch 2132301 110mm center (1400V) to 630A 2800104 Standard 446-447 2132302 110mm center (1400V) to 1250A 2801104 Low level E309038 Page 448-449 426
URS URS Rated Voltage 1250V AC /1000V AC E180276 1300V AC /1200V AC Size SQB2 - DIN 43653 110mm With fitting for microswitch Rated Breaking Test Capacity Voltage IEC - 1.1Un 120kA UL - 1.0Un M10 With fitting for microswitch Class ar UL 248-13 IEC 60269-4 VDE 0636- Part 40 A B C D E F G H L M Torque Max 2072532 2.78 / 70.5 1.02 / 26 0.43 / 11 2.36 / 60 4.17 / 106 0.24 / 6 2.95 / 75 3.86 / 98 5.43 / 138 Dimensions [in / mm] 2077132 2.78 / 70.5 0.94 / 24 2.36 / 60 2.95 / 75 3.86 / 98 M10 - Thread Depth 0.43 / 11 39N m / 28.7lb ft 2072532 2077132 427
URS URS Rated Breaking Test Class Rated Voltage Capacity Voltage ar 1250V AC /1000V AC IEC - 1.1Un 120kA E180276 1300V AC /1200V AC UL - 1.0Un Size SQB2 - North American/DIN Rated Current Rated Voltage[U n ] Rated Voltage[U n ] Power Pre-arcing Total I n IEC 60269-4 UL 248-13 Loss I 2 t I 2 t @ 1000V AC [A] [V] [V] [W] [A 2 s] [A 2 s] 250 1 250 1 300 55 8 200 45 000 280 1 250 1 300 59 9 900 56 000 315 1 250 1 300 66 14 000 78 000 350 1 250 1 300 71 20 000 110 000 400 1 250 1 300 75 31 000 170 000 450 1 250 1 300 80 42 000 240 000 500 1 250 1 300 90 56 000 310 000 550 1 250 1 300 105 71 000 350 000 630 1 250 1 300 110 105 000 540 000 700 1 100 1 200 115 148 000 710 000 800 1 100 1 100 123 225 000 1 180 000 UL 248-13 IEC 60269-4 VDE 0636- Part 40 428
URS URS Rated Breaking Test Class Rated Voltage Capacity Voltage ar UL 248-13 1250V AC /1000V AC IEC - 1.1Un IEC 60269-4 120kA E180276 1300V AC /1200V AC UL - 1.0Un VDE 0636- Part 40 Size SQB2 - North American/DIN Coefficients for Heavy Duty Applications a A2 B1 B2 Cf3 130 0.6 1.25 0.6 0.8 Cut-Off current Characteristics Time-Current Characteristics Cut-Off Current - Peak [ka] Virtual Pre-arcing time - [s] Prospective Short Circuit Current [ka] (Symmetrical r.m.s.) R.M.S. Prospective Current [A] 429
URS URS Rated Voltage 1250V AC /1100V AC Rated Breaking Test Capacity Voltage 120kA IEC - 1.1Un Class ar IEC 60269-4 VDE 0636- Part 40 Size SQB2x2 - DIN 43653 Rated Current I n [A] 630 700 800 900 1000 1100 1250 1400 1600 With fitting for microswitch Article Number 2077832.630 2077832.700 2077832.800 2077832.900 2077832.1000 2077832.1100 2077832.1250 2077832.1400 2077832.1600 Weight [kg / 1] 1.68 Units per Package 1 Rated Voltage[U n ] Rated Voltage[U n ] Power Loss Pre-arcing Total IEC 60269-4 UL 248-13 I 2 t I 2 t @ 1000V AC [V] [V] [W] [A 2 s] [A 2 s] 1 250 139 56 000 312 000 1 250 149 80 000 440 000 1 250 158 124 000 680 000 1 250 168 168 000 960 000 1 250 189 224 000 1 240 000 1 250 221 284 000 1 400 000 1 250 230 420 000 2 160 000 1 100 242 592 000 2 840 000 1 100 258 900 000 4 720 000 For DC Application see pages 428 2077832 Dimensions [in / mm] A 2.78 / 70.5 B 1.77 / 45 C 0.43 / 11 D 2.36 / 60 F 0.16 / 4 G 5.83 / 148 H 6.69 / 170 I 2.83 / 72 J 1.89 / 48 K 3.54 / 90 L 2.89 / 73.5 M M10 - Thread Depth 0.43 / 11 Torque Max - 39N m / 28.7lb ft Accessories Microswitch 2800104 Standard 2801104 Low level E309038 Page 448-449 Page 430
URS URS Rated Breaking Test Rated Voltage Capacity Voltage 1250V AC /1100V AC 120kA IEC - 1.1Un Class ar IEC 60269-4 VDE 0636- Part 40 Size SQB2x2 - DIN 43653 Coefficients for Heavy Duty Applications a A2 B1 B2 Cf3 130 0.6 1.25 0.6 0.8 Cut-Off current Characteristics Time-Current Characteristics Cut-Off Current - Peak [ka] Virtual Pre-arcing time - [s] Prospective Short Circuit Current [ka] (Symmetrical r.m.s.) R.M.S. Prospective Current [A] 431
URS URS Rated Voltage 1250V AC /900V AC E180276 1300V AC /1000V AC Size SQB3 - North American Rated Current I n [A] 315 350 400 450 500 550 630 700 800 900 1000 1100 1250 1400 Rated Breaking Test Capacity Voltage IEC - 1.1Un 120kA UL - 1.0Un US-Long Long US-Threaded 1/2" UNC With fitting for microswitch With fitting for microswitch UL Article Number rec Article Number 2073832.315 2078432.315 2073832.350 2078432.350 2073832.400 2078432.400 2073832.450 2078432.450 2073832.500 2078432.500 2073832.550 2078432.550 2073832.630 2078432.630 2073832.700 2078432.700 2073832.800 2078432.800 2073832.900* 20784 32.900* 2073832.1000** 2078432.1000** 2073832.1100** 2078432.1100** 2073832.1250*** 2078432.1250*** 2073832.1400*** 2078432.1400*** *Rated 1200V-IEC / 1300V-UL 248-13 **Rated 1000V-IEC / 1000V-UL 248-13 ***Rated 900V-IEC Weight [kg / 1] 1.04 1.04 1.02 1.02 Units per Package 3 3 3 3 UL rec Class ar UL 248-13 IEC 60269-4 VDE 0636- Part 40 Accessories Microswitch 2800104 2801104 Standard Low level E309038 Page 448-449 Page 432
URS URS Rated Breaking Test Class Rated Voltage Capacity Voltage ar 1250V AC /900V AC IEC - 1.1Un 120kA E180276 1300V AC /1000V AC UL - 1.0Un Size SQB3 - North American US-Long Long US-Threaded 1/2" UNC With fitting for microswitch With fitting for microswitch UL 248-13 IEC 60269-4 VDE 0636- Part 40 A B C D E 1 E 2 F G H L M Torque Max 2073832 2078432 Dimensions [in / mm] 2.83 / 72 2.83 / 72 1.38 / 35 1.10 / 28 0.63 / 16 2.87 / 73 2.87 / 73 5.20 / 132 3.86 / 98 0.24 / 6 3.46 / 88 4.37 / 111 6.22 / 158 3.43 / 88 4.37 / 111 2.90 / 73.5 1/2-UNC - Thread Depth 0.47 / 12 52N m / 38.3lb ft 2073832 2078432 433
URS URS Rated Voltage 1250V AC /900V AC E180276 1300V AC /1000V AC Size SQB3 - DIN 43653 Rated Breaking Test Capacity Voltage IEC - 1.1Un 120kA UL - 1.0Un Rated 110mm M12 Current With fitting for microswitch With fitting for microswitch I n UL [A] Article Number rec Article Number 315 2073532.315 2078132.315 350 2073532.350 2078132.350 400 2073532.400 2078132.400 450 2073532.450 2078132.450 500 2073532.500 2078132.500 550 2073532.550 2078132.550 630 2073532.630 2078132.630 700 2073532.700 2078132.700 800 2073532.800 2078132.800 900 2073532.900* 2078132.900* 1000 2073532.1000** 2078132.1000** 1100 2073532.1100** 2078132.1100** 1250 2073532.1250*** 2078132.1250*** 1400 2073532.1400*** 2078132.1400*** *Rated 1200V-IEC / 1300V-UL 248-13 **Rated 1000V-IEC / 1000V-UL 248-13 ***Rated 900V-IEC Weight [kg / 1] 1.04 1.04 1.02 1.02 Units per Package 3 3 3 3 UL rec ar UL 248-13 IEC 60269-4 VDE 0636- Part 40 Accessories E309038 Fuse Base 2132301 110mm center (1400V) to 630A 2132302 110mm center (1400V) to 1250A Page Microswitch 446-447 2800104 2801104 Standard Low level E309038 Page 448-449 434
URS URS Rated Breaking Test Class Rated Voltage Capacity Voltage ar UL 248-13 1250V AC /900V AC IEC - 1.1Un IEC 60269-4 120kA E180276 1300V AC /1000V AC UL - 1.0Un VDE 0636- Part 40 Size SQB3 - DIN 43653 110mm With fitting for microswitch M12 With fitting for microswitch A B C D E F G H L M Torque Max 2073532 2.83 / 72 1.38 / 35 0.43 / 11 2.87 / 73 4.17 / 106 0.24 / 6 3.46 / 88 4.37 / 111 5.43 / 138 Dimensions [in / mm] 2078132 2.83 / 72 1.10 / 28 2.87 / 73 3.46 / 88 4.37 / 111 2.90 / 73.5 M12 - Thread Depth 0.47 / 12 52N m / 38.3lb ft 2073532 2078132 435
URS URS 1250V AC /900V AC E180276 1300V AC /1000V AC Size SQB3 - North American/DIN Rated Current I n [A] 315 350 400 450 500 550 630 700 800 900 1000 1100 1250 1400 Rated Voltage Rated Breaking Test Class Capacity Voltage ar 120kA IEC - 1.1Un UL - 1.0Un Rated Voltage[U n ] Rated Voltage[U n ] Power Loss Pre-arcing Total IEC 60269-4 UL 248-13 I 2 t I 2 t @ 1000V AC [V] [V] [W] [A 2 s] [A 2 s] 1 250 1 300 83 11 000 60 000 1 250 1 300 85 15 000 90 000 1 250 1 300 92 22 000 130 000 1 250 1 300 99 33 000 190 000 1 250 1 300 110 42 000 230 000 1 250 1 300 115 56 000 320 000 1 250 1 300 120 83 000 480 000 1 250 1 300 131 113 000 640 000 1 250 1 300 135 201 000 1 070 000 1 200 1 300 140 236 000 1 300 000 1 000 1 000 150 350 000 1 900 000 1 000 1 000 174 443 000 2 400 000 900 198 652 000 3 300 000 900 210 852 000 3 900 000 UL 248-13 IEC 60269-4 VDE 0636- Part 40 436
URS URS Rated Voltage 1250V AC /900V AC E180276 1300V AC /1000V AC Size SQB3 - North American/DIN Rated Breaking Test Capacity Voltage IEC - 1.1Un 120kA UL - 1.0Un Class ar UL 248-13 IEC 60269-4 VDE 0636- Part 40 Coefficients for Heavy Duty Applications a A2 B1 B2 Cf3 130 0.6 1.25 0.6 0.8 Cut-Off current Characteristics Time-Current Characteristics Cut-Off Current - Peak [ka] Virtual Pre-arcing time - [s] Prospective Short Circuit Current [ka] (Symmetrical r.m.s.) R.M.S. Prospective Current [A] 437
URS URS Rated Voltage 1250V AC /900V AC Rated Breaking Test Capacity Voltage 120kA Un Class ar IEC 60269-4 VDE 0636- Part 40 Size SQB3-70 - DIN 43653 Rated Current I n [A] 1000 1100 1250 1400 1500 1600 With fitting for microswitch Article Number 2078152.1000 2078152.1100 2078152.1250 2078152.1400 2078152.1500 2078152.1600 Weight [kg / 1] 1.34 Units per Package 2 Rated Voltage[U n ] Rated Voltage[U n ] Power Loss Pre-arcing Total IEC 60269-4 UL 248-13 (@ 0.8xI n ) I 2 t I 2 t @ rated voltage [V] [V] [W] [A 2 s] [A 2 s] 1 250 90 346 000 1 000 000 1 250 99 486 000 1 400 000 1 250 109 678 000 2 000 000 1 000 118 903 000 3 600 000 900 128 1 126 000 5 000 000 900 137 1 374 000 6 100 000 For DC Application see pages 436 2078152 A B D G H L M Dimensions [in / mm] 3.23 / 82 1.10 / 28 2.87 / 73 3.46 / 88 4.37 / 111 3.58 / 91 M12 - Thread Depth 0.47 / 12 Torque Max - 52N m / 38.3lb ft Accessories Microswitch 2800104 Standard 2801104 Low level E309038 Page 448-449 Page 438
URS URS Rated Voltage 1250V AC /900V AC Rated Breaking Test Capacity Voltage 120kA Un Class ar IEC 60269-4 VDE 0636- Part 40 Size SQB3-70 - DIN 43653 Coefficients for Heavy Duty Applications a A2 B1 B2 Cf3 130 0.6 1.25 0.6 0.8 Cut-Off current Characteristics Time-Current Characteristics Cut-Off Current - Peak [ka] Virtual Pre-arcing time - [s] Prospective Short Circuit Current [ka] (Symmetrical r.m.s.) R.M.S. Prospective Current [A] 439
URS URS Rated Voltage 1250V AC /850V AC Rated Breaking Test Capacity Voltage 120kA 1000V AC Class ar IEC 60269-4 VDE 0636- Part 40 Size SQB3x2 - DIN 43653 Rated Current With fitting for Rated Voltage[U n ] Rated Voltage[U n ] Power Loss Pre-arcing Total I n microswitch IEC 60269-4 UL 248-13 I 2 t I 2 t @ 1000V AC [A] Article Number [V] [V] [W] [A 2 s] [A 2 s] 800 2078832.800 1 250 193 88 000 520 000 900 2078832.900 1 250 208 132 000 760 000 1000 2078832.1000 1 250 231 168 000 920 000 1250 2078832.1250 1 250 252 332 000 1 920 000 1400 2078832.1400 1 250 275 452 000 2 560 000 1600 2078832.1600 1 250 284 804 000 4 280 000 1800 2078832.1800 1 200 294 944 000 5 200 000 2000 2078832.2000 1 000 315 1 400 000 7 600 000 2200 2078832.2200 1 000 365 1 772 000 9 600 000 2500 2078832.2500 900 416 2 600 000 13 200 000 2800 2078832.2800 850 441 3 400 000 15 600 000 Weight [kg / 1] 2.87 For DC Application see pages 436 Units per Package 1 2078832 Dimensions [in / mm] A 2.83 / 72 B 1.97 / 50 C 0.51 / 13 D 2.87 / 73 F 0.16 / 4 G 6.85 / 174 H 7.76 / 197 I 3.39 / 86 J 2.13 / 54 K 3.54 / 90 L 2.89 / 73.5 M M12 - Thread Depth 0.47 / 12 Torque Max - 52N m / 38.3lb ft Accessories Microswitch 2800104 Standard 2801104 Low level E309038 Page 448-449 Page 440
URS URS Rated Voltage 1250V AC /850V AC Rated Breaking Test Class Capacity Voltage ar IEC 60269-4 120kA 1000V AC VDE 0636- Part 40 Size SQB3x2 - DIN 43653 Coefficients for Heavy Duty Applications a A2 B1 B2 Cf3 130 0.6 1.25 0.6 0.8 Cut-Off current Characteristics Time-Current Characteristics Cut-Off Current - Peak [ka] Virtual Pre-arcing time - [s] Prospective Short Circuit Current [ka] (Symmetrical r.m.s.) R.M.S. Prospective Current [A] 441
URS URS Rated Breaking Test Class Rated Voltage Capacity Voltage ar 1100V AC /800V AC 120kA 1000V AC IEC 60269-4 Size SQB4 - DIN 43653 Rated Current With fitting for Rated Voltage[U n ] Rated Voltage[U n ] I n microswitch IEC 60269-4 UL 248-13 [A] Article Number [V] [V] 1600 2079532.1600 1 100 1800 2079532.1800 1 100 2000 2079532.2000 1 000 2200 2079532.2200 1 000 2400 2079532.2400 900 Power Loss (@ 0.8xI n ) [W] 180 185 190 195 199 Pre-arcing Total I 2 t I 2 t @ 1000V AC [A 2 s] [A 2 s] 635 000 3 200 000 886 000 4 800 000 1 180 000 5 560 000 1 770 000 8 350 000 2 720 000 12 800 000 3000 3200 2079532.3000 2079532.3200 Weight [kg / 1] 1.9 Units per Package 1 Press Packs Contact SIBA 800 235 800 260 M Coefficients for Heavy Duty Applications a A2 B1 B2 Cf3 N 130 0.6 1.25 0.6 0.8 1.5 I 2 t @ 880V AC [A 2 s] 3 613 000 22 300 000 4 640 000 28 640 000 Dimensions [in / mm] A 2.95 / 75 B 2.05 / 52 C 1.30 / 33 D 4.06 / 103 G 4.65 / 118 H 5.55 / 141 L 3.46 / 88 M M10 - Thread Depth 0.43 / 11 Torque Max - 39N m / 28.7lb ft C D G H B D Accessories 2079532 A L Microswitch 2800104 Standard 2801104 Low level E309038 Page 448-449 Page 442
URS URS Rated Voltage 2000V AC Rated Breaking Test Capacity Voltage 100kA 2200V AC Class ar IEC 60269-4 VDE 0636- Part 40 Size SQB3 - DIN 43653 Rated Current With fitting for Rated Voltage[U n ] Rated Voltage[U n ] I n microswitch IEC 60269-4 UL 248-13 [A] Article Number [V] [V] 250 2075332.250 2 000 450 2075332.450 2 000 500 2075332.500 2 000 550 2075332.550 2 000 630 2075332.630 2 000 700 2075332.700 2 000 Weight [kg /1] 2.1 Units per Package 1 Power Loss Pre-arcing Total I 2 t I 2 t @ 2000V AC [W] [A 2 s] [A 2 s] 129 56 500 356 000 131 66 500 419 000 135 89 200 562 000 138 124 600 785 000 142 220 000 1 390 000 145 329 000 2 250 000 New Product Contact SIBA Dimensions [in / mm] A 5.61 / 149.5 B 1.10 / 28 D 2.87 / 73 G 3.43 / 88 H 4.45 / 113 L 5.65 / 143.5 M M12 - Thread Depth 0.47 / 12 Torque Max - 52N m / 38.3lb ft Coefficients for Heavy Duty Applications a A2 B1 B2 Cf3 130 0.6 1.25 0.5 0.8 H G D D M B L A 2075332 Accessories Microswitch 2800311 2800411 Standard Level Low level Single Change Over Circuit Page 448-449 Microswitch 2800321 2800421 Standard Level Low level Double Change Over Circuit Page 448-449 443
URS URS Rated Voltage 2500V AC Rated Breaking Test Capacity Voltage 100kA 2500V AC Class ar Company - Standard Size SQB3 - DIN 43653 Rated Current With fitting for Rated Voltage[U n ] Rated Voltage[U n ] Power Loss Pre-arcing Total I n microswitch I 2 t I 2 t @ 2 500V AC [A] Article Number [V] [V] [W] [A 2 s] [A 2 s] 400 2079152.400 2 500 105 18 400 122 000 315 2079152.315 2 500 111 34 900 230 000 350 2079152.350 2 500 117 49 000 323 000 400 2079152.400 2 500 123 81 000 533 000 450 2079152.450 2 500 128 121 000 798 000 500 2079152.500 2 500 132 166 000 1 100 000 550 2079152.550 2 500 136 248 000 1 632 000 630 2079152.630 2 500 142 357 000 2 350 000 700 2079152.700 2 500 146 486 000 3 200 000 800 2079152.800 2 000 71 903 000 5 050 000* 1000 2079152.1000 1 800 111 1 160 000 5 450 000* Weight [kg / 1] *Tested at 1.1U n 2.6 Units per Package 1 New Product Contact SIBA Dimensions [in / mm] A 7.17 / 181 B 1.10 / 28 D 2.87 / 73 G 3.43 / 88 H 5.98 / 152 L 7.52 / 191 M M12 - Thread Depth 0.37 / 9.5 Torque Max - 52N m / 38.3lb ft M D G D H A L B 2079152 Accessories Page Microswitch Microswitch 2800312 Standard Level Single Change 2800322 448-449 28004 2 Low level Over Circuit 2800422 Standard Level Low level Double Change Over Circuit Page 448-449 444
URS URS Rated Breaking Test Class Rated Voltage [U n ] Capacity Voltage ar 2500V AC 100kA 2500V AC Company - Standard Size SQB3 - DIN 43653 Coefficients for Heavy Duty Applications a A2 B1 B2 Cf3 130 0.6 1.25 0.6 0.8 Time-Current Characteristics Virtual Pre-arcing time - [s] R.M.S. Prospective Current [A] Arc voltage Reduction factor Reduction factor for diagram for I 2 t total power loss 5500 1.2 1.0 5000 1.0 0.8 UL V AC 4500 K B 0.8 K w 0.6 4000 0.6 0.4 3500 0.4 0.2 3000 1400 1800 2200 2600 UB V AC 0.2 1000 1500 2000 2500 UB VAC 0 0 0.2 0.4 0.6 0.8 1.0 I B I N 445
URS URS E186970 Accessories DIN 43653 Fuse Bases for Fuse Links With Blade Contacts IEC 60269-4 - 1 700V - UL / 900V-IEC and 1200V -UL / 1400V - IEC - Sec 1B Fuse Bases for DIN SQB Sizes 1, 2 and 3 Fuses UL E186970 Article Number 2131301 2131302 2132301 2132302 Mounting Centers [mm] 80 80 110 110 Rated Voltage IEC / UL [V] 900 / 700 900 / 700 1400 / 1200 1400 / 1200 Rated Current IEC / UL [A] 630 / 630 1250 / 1250 630 / 630 1250 / 1250 Interrupt withstand current [ka] 200 200 120 120 Rated power acceptance [W] 60 110 60 110 Weight [kg / 1] 0.91 1.22 0.93 1.26 UL E35113 9990001 / 1000 / 1400 200 0.2 80mm Center 2131301 5.90 / 150 3.35 / 85 0.63 / 16 Dimensions [in / mm] A B C 0.83 / 21 D 3.15 / 80 E 4.33 / 110 0.30 / 8 F 0.30 / 8 1.80 / 46 G 1.80 / 46 5.00 / 127 H(Size 1) 5.00 / 127 5.12 / 130 H(Size 2) 5.12 / 130 5.40 / 137 H(Size 3) 5.40 / 137 0.35 / 9 I 0.35 / 9 4.10 / 104 J(Size 1) 4.10 / 104 4.25 / 108 J(Size 2) 4.25 / 108 4.53 / 115 J(Size 3) 4.53 / 115 0.98 / 25 K 0.98 / 25 8.07 / 205 8.07 / 205 L max M 110mm Center 2132301 7.10 / 180 3.35 / 85 0.63 / 16 0.83 / 21 / M10 / M10 2.36 / 60 1.57 / 40 N O 2.36 / 60 1.57 / 40 Nut Torque Max - 48N m / 35.3lb ft Base Torque Max - 15N m / 41.3.3lb in 446
URS URS E186970 Accessories Fuse Bases for Fuse Links with Blade Contacts 700V - UL / 900V-IEC and 1200V -UL / 1400V - IEC DIN 43653 IEC 60269-4 - 1 - Sec 1B Dimensions [in / mm] 80mm Center 110mm Center 2131302 2132302 5.90 / 150 A 7.10 / 180 3.35 / 85 B 3.35 / 85 0.63 / 16 C 0.63 / 16 0.83 / 21 D 0.83 / 21 3.15 / 80 E 4.33 / 110 0.30 / 8 F 0.30 / 8 1.80 / 46 G 1.80 / 46 5.00 / 127 H(Size 1) 5.00 / 127 5.12 / 130 H(Size 2) 5.12 / 130 5.40 / 137 H(Size 3) 5.40 / 137 0.35 / 9 I 0.35 / 9 4.10 / 104 J(Size 1) 4.10 / 104 4.25 /108 J(Size 2) 4.25 / 108 4.53 / 115 J(Size 3) 4.53 / 115 0.98 / 25 K 0.98 / 25 8.07 / 205 L max 8.07 / 205 / M10 M / M10 2.36 / 60 N 2.36 / 60 1.57 / 40 O 1.57 / 40 Nut Torque Max - 48N m / 35.3lb ft Base Torque Max - 15N m / 41.3.3lb in 9990001 Rated Voltage - 1000V -UL Rated Current - 1400A - UL Maximum insulator base temperature 125C. Insulator base: Thermal Plastic Flammability rating of insulator: UL 94 V-0 Stud: Steel, Zinc platted Nuts: Steel, Nickel plated Belleville washer: Steel, Zinc plated RoHS Compliant Nut Torque: 300lb in Mounting: 1/4" fastener, Torque 25-30lb in 9990001 447
URS Accessories Microswitches for Fuse Links DIN 43653 Article Number 2800310 2800311 2800312 Weight [kg / 1] 0.025 Units per Package 10 2800320 2800321 2800322 Weight [kg / 1] 0.032 Units per Package 10 Insulating Voltage [V] 2800104 1250 2200 5500 1250 2200 5500 Standard Level Micro-switches Change Over Circuits 1 1 1 1 2 2 2 Interrupt Rating (Resistive Load) Minimum Load Requirement AC/DC Maximum AC/DC [V] resistive [ma] [V] [A] M-Switch 30 10 250 10 B-Switch 5V 30V 100V Low Level Micro-switches Insulating Change Over Interrupt Rating (Resistive Load) Voltage Circuits Minimum Load Requirement AC/DC Maximum AC/DC Article Number [V] [V] resistive [ma] [V] [A] M-Switch 2801104 1 5 1 250V AC 10A AC 35V DC 1A DC B-Switch 2800410 1250 1 2800411 2200 1 DO NOT USE BELOW 2800412 5500 1 Weight [kg / 1] 0.025 250V AC 10A AC 5V 1mA Units per Package 35V DC 1A DC 10 2800420 1250 2 2800421 2200 2 2800422 5500 2 Weight [kg / 1] 0.032 Units per Package 10 50mA 10mA 5mA 250V AC 35V DC 12A AC 10A DC 448
URS Accessories Microswitches for Fuse Links B-Microswitch 2801004 Standard 2801104 Low Level E186970 M-Microswitch 2800310 2800410 2800311 2800411 2800312 2800412 2800320 2800420 2800321 2800421 2800322 2800422 449
URZ URZ Fuses for Semiconductor Protection - Cylindrical Fuses SIBA cylindrical Ultra-Rapid fuses are available in six different sizes. They can be ordered with an integral striker for blown fuse indication or operation of microwitch for remote monitoring or without the striker. Class: Voltage ratings: Current ratings: Standards: gr, ar and grl(gs) 250V AC to 1000V AC 16 A to 400 A UL 248-13 IEC 60269-1 & 4 DIN VDE 0636-40 DIN 43653 Approvals: E180276 Features and Benefits High interrupt ratings, up to 300kA Power semiconductor protection according to IEC 60269-1 & 4 Fuse classes according to IEC 60269-4 and DIN VDE 0636-40 Accessories available are fuse bases, micro-switches fuse clips. 450
URZ URZ Fuses for Semiconductor Protection - Cylindrical Article No. Description Selection Guide Technical Data 250V AC 7000140 7000740 5x20mm, ar, No blown fuse indication 454 454-455 400V AC 7006584 6.35x32mm, grl(gs) No blown fuse indication 457 600V AC 6003434 6006434 6007534 6003305 10x38mm, grl(gs) 10x38mm, grl(gs), PCB Mount 10x38mm, grl(gs), 50.6mm centers 10x38mm, ar No blown fuse indication No blown fuse indication No blown fuse indication No blown fuse indication 458 458-459 460 460-461 600V AC /500V AC 5005806 5005906 14x51mm, ar 14x51mm, ar No blown fuse indication w/striker 462 462-463 660V AC /500V AC 5006006 5006106 5019320 5019420 22x58mm, ar 22x58mm, ar 27x60mm, ar 27x60mm, ar No blown fuse indication w/striker No blown fuse indication w/striker 464 464-465 466 466-467 5019006 5019106 5019206 5012406 5012606 5012906 5012434 27x60mm, gr 27x60mm, gr 27x60mm, gr, 80mm centers 14x51mm, ar 14x51mm, ar 14x51mm, ar, 63mm centers 14x51mm, grl(gs) 14x51mm, grl(gs) 14x51mm, grl(gs), 63mm centers 22x58mm, gr/ar 22x58mm, gr/ar, 80mm centers 22x58mm, gr/ar 22x58mm, gr/ar, 80mm centers 22x58mm, grl(gs) 22x58mm, grl(gs) 22x58mm, grl(gs), 80mm centers 22x58mm, grl(gs), PCB mount 660V DC No blown fuse indication w/striker No blown fuse indication 700V AC -UL/690V AC -IEC No blown fuse indication w/striker No blown fuse indication No blown fuse indication w/striker 5012634 5012934 No blown fuse indication 5014006 No blown fuse indication 5014206 w/striker 5014506 No blown fuse indication 5015406 w/striker 5014034 No blown fuse indication 5014234 w/striker 5014534 No blown fuse indication 5014634 No blown fuse indication 468 468-469 470 470-471 472 472-473 474 474-475 476 476-477 700V AC /500V AC 7012540 5017906 5018106 5018006 6.35x32mm, ceramic, ar 10x38mm, gr 10x38mm, gr 10x38mm, gr, 50.6mm centers No blown fuse indication No blown fuse indication w/ blown fuse indicator No blown fuse indication 478 480 478-479 480-481 700V DC 5011806 5020106 5020206 14x51mm, ar 14x51mm, ar 14x51mm, ar, 63mm centers No blown fuse indication No blown fuse indication No blown fuse indication 482 484 482-483 484-485 451
1202103 p7 SIBA UR 175 516pp 8/22/13 3:35 PM Page 452 URZ Fuses for Applications Fuses for Semiconductor Protection - Cylindrical Article No. Description Selection Guide Technical Data 1000V AC 5019620 27x60mm, ar No blown fuse indication 5019720 27x60mm, ar w/striker 486 486-487 7017240 5021006 5019906 6.35x32mm, ar, DMI 10x35mm, ar 10x38mm, gr 5105805.1DC No blown fuse indication 14x51mm 1-Pole, DIN Rail mount 5105805.1LDC w/ Neon Lamp Indicator 5105805.2DC No blown fuse indication 14x51mm 2-Pole, DIN Rail mount 5105805.2LDC w/ Neon Lamp Indicator 5106305.1DC No blown fuse indication 10x38mm 1-Pole, DIN Rail mount 5106305.1LDC w/ Neon Lamp Indicator 5106305.2DC No blown fuse indication 10x38mm 2-Pole, DIN Rail mount 5106305.2DLC w/ Neon Lamp Indicator 5106305.1 No blown fuse indication 10x38mm 1-Pole, DIN Rail mount 5106305.1L w/ Neon Lamp Indicator 5106305.2 No blown fuse indication 10x38mm 2-Pole, DIN Rail mount 51063 05.2L w/ Neon Lamp Indicator 51063 05.3 w/ Neon Lamp Indicator 10x38mm 3-Pole, DIN Rail mount 5106305.3L w/microswitch 5106305.4 5106305.4L 10x38mm 4-Pole, DIN Rail mount 5105805.1 No blown fuse indication 5105805.1L 14x51mm 1-Pole, DIN Rail mount w/ Neon Lamp Indicator 5105805.1S w/microswitch 5105805.2 No blown fuse indication 5105805.2L 14x51mm 2-Pole, DIN Rail mount w/ Neon Lamp Indicator 5105805.2S w/microswitch 5105805.3 No blown fuse indication 5105805.3L 14x51mm 3-Pole, DIN Rail mount w/ Neon Lamp Indicator 5105805.3S w/microswitch 5106005.1 No blown fuse indication 5106005.1L 22x58mm 1-Pole, DIN Rail mount w/ Neon Lamp Indicator 5106005.1S w/microswitch 5106005.2 No blown fuse indication 5106005.2L 22x58mm 2-Pole, DIN Rail mount w/ Neon Lamp Indicator 5106005.2S w/microswitch 5106005.3 No blown fuse indication 5106005.3L 22x58mm 3-Pole, DIN Rail mount w/ Neon Lamp Indicator 5106005.3S w/microswitch 1000V AC /1000V DC No blown fuse indication 488 No blown fuse indication 489 No blown fuse indication 490 490-491 Accessories for URZ Fuses Fuse Modules w/ Neon Lamp Indicator w/microswitch Fuse Clips and Terminals 492 492 493 493-494 493-494 452
URZ Accessories for URZ Fuses Fuse Clips Article No. Description Selection Guide Technical Data 204000 5mm dia. fuse push on caps with leads up to 6.3A 204001 204002 5mm dia. fuse push on caps with leads up to 10A 5mm dia. fuse push on caps with leads up to 16A 204100 6.3mm dia. fuse push on caps with leads up to 12.5A 204101 6.3mm dia. fuse push on caps with leads up to 20A 199073 5mmdia. fuse clips for PCB mounting 199207 199487 199429 5mmdia. fuse clips for PCB mounting 5mm dia. fuse clips for PCB mounting 6.3mm dia. fuse clips for PCB mounting 5806316 10mm diameter contacts - PCB Mounting 5806319 10mm diameter contacts - PCB Mounting 5806317 10mm diameter contacts - Screw Mounting 6301701 Clamping Plate for 50 063 01 6101701.3 Terminal Link for 50 063 01 6100101.2 14mm diameter contacts - Screw Mounting 6301701 Clamping Plate for 61 001 01.2 5805806 14mm diameter contacts - PCB Mounting 6100201.3 20mm & 22mm diameter contacts - Screw Mounting 6300201 Clamping Plate for 61 002 01.3 6100201.4 Terminal Link for 61 002 01.3 5806006 20mmx & 22mm diameter contacts - PCB Mounting 6100401.3 27mm diameter contact - Screw Mounting 6300201 Clamping Plate for 61 004 01.3 495 496 497 498 453
URZ URZ E180276 Size 5x20mm Rated Voltage [Un] 250V AC Rated Breaking Test Capacity Voltage 300kA 250V AC 1.5kA (6.3A up) 250V AC Rated Rated Voltage Current Ceramic Breaking Drop I n [A] 0.100 0.125 0.160 Article Number 7000140.0.100 7000140.0.125 7000140.0.160 UL rec Current [A] 300kA @ 250V AC 300kA @ 250V AC 300kA @ 250V AC @I n [mv] 4 000 3 500 1 300 0.200 0.250 0.315 0.400 0.500 0.630 0.800 1 7000140.0.200 7000140.0.250 7000140.0.315 7000140.0.400 7000140.0.500 7000140.0.630 7000140.0.800 7000140.1 300kA @ 250V AC 300kA @ 250V AC 300kA @ 250V AC 300kA @ 250V AC 300kA @ 250V AC 300kA @ 250V AC 300kA @ 250V AC 300kA @ 250V AC 600 550 500 500 550 600 600 600 1.25 1.6 2 2.5 3.15 4 5 6.3 7000140.1.25 7000140.1.6 7000140.2 7000140.2.5 7000140.3.15 7000140.4 7000140.5 7000140.6.3 300kA @ 250V AC 300kA @ 250V AC 300kA @ 250V AC 300kA @ 250V AC 300kA @ 250V AC 300kA @ 250V AC 300kA @ 250V AC 1.5kA @ 250V AC 400 400 400 400 400 350 350 300 8 7000140.8 1.5kA @ 250V AC 300 10 7000140.10 1.5kA @ 250V AC 300 12.5 7000140.12.5 1.5kA @ 250V AC 200 6.3 8 10 12.5 7000740.6.3 7000740.8 7000740.10 7000740.12.5 300kA @ 250V 1 AC 300kA @ 250V 1 AC 300kA @ 250V 1 AC 300kA @ 250V 1 AC 250 230 180 150 Weight (kg per 100) 1 cos(phi) = 0.2 0.14 Units per Package For 6.3A and higher, consideration should be given to heat dissipation 10 Class FF Power Loss @ 1.0xI n [W] 0.4 0.5 0.3 0.2 0.2 0.2 0.2 0.3 0.4 0.5 0.6 0.5 0.7 0.8 1 1.3 1.4 1.8 1.9 2.4 3 2.5 2.8* 3.0* 3.4* 4* Company Standard Pre-arcing I 2 t [A 2 s] 0.0016 0.0024 0.004 0.01 0.02 0.04 0.07 0.07 0.15 0.32 0.32 0.20 0.31 0.64 0.88 1.6 3.2 5.9 10 19 30 115 1.6 4.5 8.8 15 Total I 2 t @ 250V AC [A 2 s] 0.0023 0.0034 0.0056 0.011 0.027 0.042 0.084 0.091 0.24 0.42 0.45 0.28 0.51 1 1.5 2.7 5.4 10 17 32 54 210 4.8 14 26 44 7000740 Accessories Fuse Clips 199073 199207 199429 Page PCB 495 Press on Cap Leads 204000 up to 6.3A maximum 204001 up to 10A maximum 204002 up to 16A maximum Page 495 454
URZ URZ Rated Voltage [Un] Rated Breaking Test Capacity Voltage Class FF Company Standard E180276 Size 5x20mm 250V AC 300kA 250V AC 1.5kA (6.3A up) 250V AC Fusing Time Limits Rated Current 100mA 800mA 1A 12.5A Rated Current 6.3A 12.5A 1.0I n 2.0I n 2.75I n 4I n 10I n 70 001 40 > 1hr < 60ms < 6ms 4ms 1ms > 1hr < 1s < 3ms 100ms 25ms 70 007 40 1.2I n 2.0I n 2.75I n 4I n 10I n 4ms 1ms > 1hr < 30m < 1ms 300ms 30ms Normalized Current, Time-Current Characteristics Accessories Fuse Clips Page Press on Cap Leads 199429 PCB 495 204100 up to 12.5A maximum 204101 up to 20A maximum Page 495 455
URZ URZ 456
URZ URZ E180276 Size 6.3x32mm Rated Current I n [A] 6.3 8 10 12.5 16 20 UL Article Number rec 7006584.6.3 7006584.8 7006584.10 7006584.12.5 7006584.16 7006584.20 Weight (kg per 100) 0.9 Units per Package 10 Rated Voltage Rated Breaking Test Class [Un] Capacity Voltage grl IEC 60269-4 400V AC 120kA 400Vac (gs) VDE 0636 Part 40 Rated Breaking Current [ka] 120 120 120 120 120 120 Voltage Drop @I n [mv] 190 190 180 150 150 160 Power Loss @ I n [W] 1.2 1.5 1.8 1.9 2.3 3.2 Pre-arcing I 2 t [A 2 s] 1.8 3.0 5.1 12 20 35 Total I 2 t @ 400V AC [A 2 s] 11 18 31 69 120 210 Rated Current 6.3A 12.5A 16A 20A Fusing Time Limits 1.1I n 1.25I n 1.5I n 2.0I n 70 065 84 > 1hr < 1h < 120ms > 1hr < 1h < 120ms 7006584 Normalized Current, Time-Current Characteristics Accessories Fuse Clips Page 199429 PCB 495 Press on Cap Leads 204100 up to 12.5A maximum 204101 up to 20A maximum Page 495 457
URZ URZ E180276 Size 10x38mm Rated Current I n [A] 6 8 10 12 16 20 25 30 Rated Voltage [Un] 600V AC Rated Breaking Test Capacity Voltage 200kA 500V AC Class grl (gs) To IEC 60 629-4 Without Without Without Power Pre-arcing Total Indicator Indicator Indicator Loss I 2 t I 2 t UL PCB UL 50.6mm UL @ 500V AC Article Number rec Article Number rec Article Number rec [W] [A 2 s] [A 2 s] 6003434.6 6006434.6 6007534.6 1.0 2.5 20 6003434.8 6006434.8 6007534.8 1.3 3.3 36 6003434.10 6006434.10 6007534.10 1.1 5.1 41 6003434.12 6006434.12 6007534.12 1.9 8.7 69 6003434.16 6006434.16 6007534.16 2.4 17 130 6003434.20 6006434.20 6007534.20 3.5 29 240 6003434.25 6006434.25 6007534.25 3.8 66 530 6003434.32 60064 4.32 6007534.32 4.3 120 950 Weight (kg per 1) 0.009 Units per Package 6006434 10 6003434 6007534 Accessories Fuse Modules - DIN Rail Mounting 5106304. 1-Pole 5106304.L 1-Pole w/neon lamp indicator 5106304.2 2-Pole 5106304.2L 2-Pole w/neon lamp indicator 5106304.3 3-Pole 5106304.3L 3-Pole w/neon lamp indicator Page Fuse Clips Page 492 5806316 Fuse Clips PCB mounting 5806319 Fuse Clips PCB mounting 496 5806317 Fuse Clips Screw mounting 6301701 Clamping plate for 5806301 496 6101701.3 Terminal bar for 5806301 E186970 458
URZ URZ E180276 Size 10x38mm Rated Voltage [Un] 600V AC Rated Breaking Test Capacity Voltage 200kA 500V AC Class grl (gs) To IEC 60 629-4 Coefficients for Heavy Duty Applications a A2 B1 B2 Cf3 150 1.0 1.25 0.5 0.8 Cut-Off current Characteristics Time-Current Characteristics Cut-Off Current - Peak [ka] Virtual Pre-arcing time - [s] Prospective Short Circuit Current [ka] (Symmetrical r.m.s.) R.M.S. Prospective Current [A] E03434-60_1 Arc voltage Reduction factor Reduction factor for diagram for I 2 t total power loss 1400 1.4 1.0 1200 1.2 0.8 UL V AC 1000 K B 1.0 K w 0.6 800 0.8 0.4 600 0.6 0.2 400 100 300 500 700 UB V AC 0.4 100 300 500 700 UB V AC 0 0 0.2 0.4 0.6 0.8 1.0 IB IN 459
URZ URZ E180276 Size 10x38mm Rated Voltage [Un] 600V AC Rated Breaking Test Capacity Voltage 300kA 600V AC Class ar Ul 248-13 IEC 60 269-4 VDE 0636 Part 40 Rated Without Power Pre-arcing Total Current Indicator Loss I 2 t I 2 t I n [A] 1 2 4 5 6 8 10 12 16 20 25 30 Article Number 6003305.1 6003305.2 6003305.4 6003305.5 6003305.6 6003305.8 6003305.10 6003305.12 6003305.16 6003305.20 6003305.25 6003305.30 UL rec [W] 1.0 1.8 1.1 1.4 1.6 1.8 2.1 2.5 3.0 3.6 4.5 5.8 [A 2 s] 0.1 0.64 1.1 1.3 2 3 5.1 7.4 13 29 52 81 @ 600V AC [A 2 s] 0.9 5.8 6 12 18 28 48 63 120 200 420 730 Weight (kg per 1) 0.009 Units per Package 10 6003305 Accessories Fuse Modules - DIN Rail Mounting Page Fuse Clips 5106304. 1-Pole 5806316 Fuse Clips PCB mounting 492 51063 04.L 1-Pole w/neon lamp indicator 5806319 Fuse Clips PCB mounting 5106304.2 2-Pole 5806317 Fuse Clips Screw mounting 5106304.2L 2-Pole w/neon lamp indicator 6301701 Clamping plate for 58 063 01 5106304.3 3-Pole 6101701.3 Terminal bar for 58 063 01 5106304.3L 3-Pole w/neon lamp indicator E186970 Page 496 496 460
URZ URZ E180276 Size 10x38mm Rated Voltage [Un] 600V AC Rated Breaking Test Capacity Voltage 300kA 600V AC Class ar Ul 248-13 IEC 60 269-4 VDE 0636 Part 40 Coefficients for Heavy Duty Applications a A2 B1 B2 Cf3 150 0.6 1.25 0.6 0.8 Cut-Off current Characteristics Time-Current Characteristics Cut-Off Current - Peak [ka] Virtual Pre-arcing time - [s] Prospective Short Circuit Current [ka] (Symmetrical r.m.s.) R.M.S. Prospective Current [A] E03305-60_1 Arc voltage Reduction factor Reduction factor for diagram for I 2 t total power loss 1400 1.2 1.0 U V AC L 1200 1000 K w 1.0 0.8 K w 0.8 0.6 800 0.6 0.4 600 0.4 0.2 400 100 300 500 UB 700 V AC 0.2 100 300 500 700 U B V AC 0 0 0.2 0.4 0.6 0.8 1.0 I I B N 461
URZ URZ Size 14x51mm Rated Current Without Indicator Rated Voltage [Un] 600V AC 500V AC (50A) With Striker Rated Breaking Test Capacity Voltage 100kA 500V AC 100kA 500V AC Class ar Power Loss UL 248-13 Pre-arcing I 2 t Total I 2 t I n [A] 6 8 10 12 16 20 25 32 40 50 Article Number Article Number 5005806.6 5005906.6 5005806.8 5005906.8 5005806.10 5005906.10 5005806.12 5005906.12 5005806.16 5005906.16 5005806.20 5005906.20 5005806.25 5005906.25 5005806.32 5005906.32 5005806.40 5005906.40 5005806.50 5005906.50 Weight (kg per 1) 0.022 Units per Package 10 [W] [A 2 s] 1.3 3 1.7 5 2.4 8 12 21 32 2.5 4.0 4.6 6.4 8.2 9.1 12 63 104 140 230 @500V AC [A 2 s] 18 27 48 93 150 250 400 680 1 200 1 600 5005806 5005906 Accessories Fuse Modules - DIN Rail Mounting w/lockout Clip 5105805.1 1-Pole 5105805.1L 1-Pole w/neon lamp indicator 5105805.1S 1-Pole w/microswitch 5105805.2 2-Pole 5105805.2L 2-Pole w/neon lamp indicator 5105805.2S 2-Pole w/microswitch 5105805.3 3-Pole 5105805.3L 3-Pole w/neon lamp indicator 5105805.3S 3-Pole w/microswitch Page 493 750V/50A E186970 Fuse Clips 6100101.2 6301701 5805806 Fuse Clips Screw mounting Clamping plate for 6100101.2 Fuse Clips PCB mounting Page 497 462
URZ URZ Size 14x51mm Rated Voltage [Un] 600V AC 500V AC (50A) Rated Breaking Test Capacity Voltage 100kA 500V AC 100kA 500V AC Class ar UL 248-13 Coefficients for Heavy Duty Applications a A2 B1 B2 Cf3 170 0.6 1.25 0.6 0.8 Cut-Off current Characteristics Time-Current Characteristics Cut-Off Current - Peak [ka] Virtual Pre-arcing time - [s] Prospective Short Circuit Current [ka] (Symmetrical r.m.s.) E05806-60_1 R.M.S. Prospective Current [A] Arc voltage Reduction factor Reduction factor for diagram for I 2 t total power loss 1400 1.4 1.0 1200 1.2 0.8 UL V AC 1000 K B 1.0 K w 0.6 800 0.8 0.4 600 0.6 0.2 400 100 300 500 700 UB VAC 0.4 100 300 500 700 UB VAC 0 0 0.2 0.4 0.6 0.8 1.0 IB IN 463
URZ URZ Size 22x58mm Rated Current I n [A] 12 16 20 25 32 40 50 63 80 100 Without Indicator Article Number 5006006.12 5006006.16 5006006.20 5006006.25 5006006.32 5006006.40 5006006.50 5006006.63 5006006.80 5006006.100 Rated Voltage Rated Breaking Test [Un] Capacity Voltage 600V AC 100kA 500V AC With Striker Article Number 5006106.12 5006106.16 5006106.20 5006106.25 5006106.32 5006106.40 5006106.50 5006106.63 5006106.80 5006106.100 Weight [kg / 1] 0.055 Units per Package 10 Class ar Power Loss [W] 2.1 3.6 4.6 5.3 8.2 8.6 11 15 18 20 IEC 60 269-4 DIN 60 269-4 VDE 0636 Part 4 acc. to UL 248-13 Pre-arcing I 2 t [A 2 s] 16 21 32 63 104 140 230 350 740 1 400 Total I 2 t @ 500V AC [A 2 s] 93 170 250 400 730 1 000 1 800 2 600 5 000 10 000 5006006 5006106 Accessories Fuse Modules - DIN Rail Mounting w/lockout Clip Page Fuse Clips & Terminal Links 5106005.1 1-Pole 6100201.3 Fuse Clips Screw mounting 5106005.1L 1-Pole w/neon lamp indicator 494 6300201 Clamping plate for 6100201.3 5106005.1S 1-Pole w/microswitch 6100201.4 Terminal Link for 6100201.3 5106005.2 2-Pole 5806006 Fuse Clips PCB mounting 5106005.2L 2-Pole w/neon lamp indicator 5106005.2S 2-Pole w/microswitch 750V/100A 5106005.3 3-Pole 5106005.3L 3-Pole w/neon lamp indicator E186970 5105805.3S 3-Pole w/microswitch Page 497-498 464
URZ URZ Size 22x58mm Rated Voltage [Un] 600V AC Rated Breaking Test Capacity Voltage 100kA 500V AC Class ar IEC 60 269-4 DIN 60 269-4 VDE 0636 Part 4 acc. to UL 248-13 Coefficients for Heavy Duty Applications a A2 B1 B2 Cf3 170 0.6 1.25 0.6 0.8 Cut-Off current Characteristics Time-Current Characteristics Cut-Off Current - Peak [ka] Virtual Pre-arcing time - [s] Prospective Short Circuit Current [ka] (Symmetrical r.m.s.) R.M.S. Prospective Current [A] Arc voltage diagram E6006-60_1 Reduction factor Reduction factor for for I 2 t total power loss 1400 1.4 1.0 1200 1.2 0.8 U L V AC 1000 K B 1.0 K w 0.6 800 0.8 0.4 600 0.6 0.2 400 100 300 500 700 UB VAC 0.4 100 300 500 700 UB V AC 0 0 0.2 0.4 0.6 0.8 1.0 I B I N 465
URZ URZ Rated Voltage Rated Breaking Test [Un] Capacity Voltage 660V AC 200kA 660V AC Class ar IEC 60 269-4 VDE 0636 Part 40 Size 27x60mm Rated Current I n [A] 20 25 32 40 50 63 80 100 125 160 200 250 Without With Striker Power Indicator Loss Pre-arcing Article Number Article Number [W] [A 2 s] 5019320.20 5019420.20 8 17 5019320.25 5019420.25 9 30 5019320.32 5019420.32 10 67 5019320.40 5019420.40 13 90 5019320.50 5019420.50 15 150 5019320.63 5019420.63 16 330 5019320.80 5019420.80 22 472 5019320.100 5019420.100 25 850 5019320.125 5019420.125 30 1 310 5019320.160 5019420.160 32 2 950 5019320.200 5019420.200 37 5 000 5019320.250 5019420.250 43 8 100 Weight [kg / 1] 0.06 Units per Package 10 I 2 t Total I 2 t @ 660V AC [A 2 s] 100 180 400 550 900 2 000 2 900 5 400 7 900 17 700 30 000 49 000 5019320 5019420 Fuse Clips & Terminal Links 6100401.3 Fuse Clips Screw mounting 6300201 Clamping plate for 6100401.3 Accessories Page 498 Page 466
URZ URZ Rated Voltage Rated Breaking Test Class [Un] Capacity Voltage ar IEC 60 269-4 660V AC 200kA 660V AC VDE 0636 Part 40 Size 27x60mm Coefficients for Heavy Duty Applications a A2 B1 B2 Cf3 130 0.6 1.25 0.6 0.8 Cut-Off current Characteristics Time-Current Characteristics 10 4 Cut-Off Current - Peak [ka] Virtual Pre-arcing time - [s] 10 3 s 10 2 10 1 10 0 20 A 25 A 32A 40A 50 A 63A 80 A 100A 125 A 160 A 200 A 250 A 10-1 8 6 5 4 3 Prospective Short Circuit Current [ka] (Symmetrical r.m.s.) 2 10-2 10 1 2 3 4 5 6 8 10 2 2 3 4 5 6 8 10 3 2 3 4 5 6 8 10 4 A 2 3 4 5 6 8 10 5 R.M.S. Prospective Current [A] Arc voltage Reduction factor diagram for I 2 t total Reduction factor for power loss 1500 1.2 1.0 U L V DC 1400 1300 K B 1.0 0.8 K w 0.8 0.6 1200 0.6 0.4 1100 0.4 0.2 1000 100 300 500 700 UB V DC 0,..2 100 300 500 700 UB V DC 0 0 0.2 0.4 0.6 0.8 1.0 IB I N 467
URZ URZ E180276 Size 27x60mm Rated Current I n Without Indicator [A] Article Number 8 5019006.8 10 5019006.10 12 5019006.12 16 5019006.16 20 5019006.20 25 5019006.25 32 5019006.32 40 5019006.40 50 5019006.50 63 5019006.63 80 5019006.80 100 5019006.100 110 5019006.110 125 5019006.125 160 5019006.160 0.09 Rated Voltage [Un] 660V DC 440V DC 125A With Striker Without Rated Voltage[U n ] Power Pre-arcing Total 2.5N Indicator Loss I 2 t I 2 t* UL Striker a 80mm UL @660V DC rec Article Number Article Number rec [W] [W] [A 2 s] [A 2 s] 5019106.8 5019206.8 660V DC 2.0 4 20 5019106.10 5019206.10 660V DC 2.2 8 40 5019106.12 5019206.12 660V DC 2.7 12 60 5019106.16 5019206.16 660V DC 3.1 32 160 5019106.20 5019206.20 660V DC 3.5 62 310 5019106.25 5019206.25 660V DC 3.9 130 650 5019106.32 5019206.32 660V DC 4.6 250 1 250 5019106.40 5019206.40 660V DC 6.6 420 2 100 5019106.50 5019206.50 660V DC 7.5 620 3 100 5019106.63 5019206.63 660V DC 8.9 1 200 6 000 5019106.80 5019206.80 660V DC 10.9 2 100 10 500 5019106.100 5019206.100 660V DC 13.5 3 500 17 500 5019106.110 5019206.110 660V DC 14.2 4 600 23 000 5019106.125 5019206.125 440V DC 16.0 7 800 29 600 5019106.160 5019206.160 440V DC 19.0 11 800 44 900 a Striker minimum operating Voltage 10V *L/R=10ms Weight [kg / 1] 0.10 Units per Package 10 Rated Breaking Test Capacity Voltage 30kA 30kA L/R=10ms 660V DC 0.11 Class gr UL 248-13 IEC EN 60 269-4 DIN 60 269-4 VDE 0636 Part 4 5019006 5019106 5019206 Accessories Fuse Clips & Terminal Links 6100401.3 Fuse Clips Screw mounting 6300201 Clamping plate for 6100401.3 Page 498 468
URZ URZ E180276 Size 27x60mm Rated Voltage [Un] 660V DC 440V DC 125A Rated Breaking Test Capacity Voltage 30kA 30kA L/R=10ms 660V DC Class gr UL 248-13 IEC EN 60 269-4 DIN 60 269-4 VDE 0636 Part 4 Coefficients for Heavy Duty Applications a A2 B1 B2 Cf3 130 0.6 1.25 0.6 0.8 Cut-Off current Characteristics Time-Current Characteristics Cut-Off Current - Peak [ka] Virtual Pre-arcing time - [s] Prospective Short Circuit Current [ka] (Symmetrical r.m.s.) R.M.S. Prospective Current [A] Arc voltage diagram Reduction factor for I 2 t total. Reduction factor for power loss U L (V AC ) K K B W.... U B (V AC ) U B (V AC )..... I B ( N I ) 469
URZ URZ E180276 Size 14x51mm Rated Voltage [Un] 700V AC Rated Breaking Test Capacity Voltage 200kA 660V AC Class gr UL 248-13 IEC 60 269-4 VDE 0636 Part 40 Rated Without With Striker Without Power Pre-arcing Current Indicator Indicator Loss I 2 t I n UL UL 63mm UL [A] Article Number rec Article Number rec Article Number rec [W] [A 2 s] 6 5012406.6 5012606.6 5012906.6 1.3 2.9 8 5012406.8 5012606.8 5012906.8 1.7 5.1 10 5012406.10 5012606.10 5012906.10 2.6 7.7 12 5012406.12 5012606.12 5012906.12 3.1 8.1 16 5012406.16 5012606.16 5012906.16 4.7 11 20 5012406.20 5012606.20 5012906.20 6.0 21 25 5012406.25 5012606.25 5012906.25 7.6 32 32 5012406.32 5012606.32 5012906.32 9.5 63 40 5012406.40 5012606.40 5012906.40 10 140 50 5012406.50 5012606.50 5012906.50 12 250 Weight [kg/1] 0.03 0.03 0.03 Units per Package 10 10 10 Total I 2 t* @ 660V AC [A 2 s] 18 28 39 75 115 190 340 620 1 050 1 900 5012406 5012606 5012906 Accessories Fuse Modules - DIN Rail Mounting w/lockout Clip Page Fuse Clips 5105805.1 1-Pole 6100101.2 Fuse Clips Screw mounting 493 5105805.1L 1-Pole w/neon lamp indicator 6301701 Clamping plate for 6100101.2 5105805.1S 1-Pole w/microswitch 5805806 Fuse Clips PCB mounting 5105805.2 2-Pole 5105805.2L 2-Pole w/neon lamp indicator 5105805.2S 2-Pole w/microswitch 750V/50A 5105805.3 3-Pole 5105805.3L 3-Pole w/neon lamp indicator E186970 5105805.3S 3-Pole w/microswitch Page 497 470
URZ URZ E180276 Size 14x51mm Rated Voltage [Un] 700V AC Rated Breaking Test Capacity Voltage 200kA 660V AC Class gr UL 248-13 IEC 60 269-4 VDE 0636 Part 40 Coefficients for Heavy Duty Applications a A2 B1 B2 Cf3 130 0.6 1.25 0.6 0.8 Cut-Off current Characteristics Time-Current Characteristics Cut-Off Current - Peak [ka] Virtual Pre-arcing time - [s] Prospective Short Circuit Current [ka] (Symmetrical r.m.s.) R.M.S. Prospective Current [A] Arc voltage diagram E12406-60_1 Reduction factor for I 2 t total Reduction factor for power loss 1400 1.2 1.0 1200 1.0 0.8 UL K B K w VAC 1000 0.8 0.6 800 0.6 0.4 600 0.4 0.2 400 100 300 500 700 UB V AC 0.2 100 300 500 700 UB V AC 0 0 0.2 0.4 0.6 0.8 1.0 IB IN 471
URZ URZ E180276 Size 14x51mm Rated Current I n [A] 10 12 16 20 25 30 32 35 40 Without Indicator Article Number 5012434.10 5012434.12 5012434.16 5012434.20 5012434.25 5012434.30 5012434.32 5012434.35 5012434.40 0.03 Rated Voltage Rated Breaking Test [Un] Capacity Voltage 700V AC UL 690V AC IEC 200kA 660Vac 440V DC, L/R=30ms 30kA With Striker Without Indicator UL UL 63mm UL rec Article Number rec Article Number rec 5012634.10 5012934.10 5012634.12 5012934.12 5012634.16 5012934.16 5012634.20 5012934.20 5012634.25 5012934.25 5012634.30 5012934.30 5012634.32 5012934.32 5012634.35 501293435 5012634.40 5012934.40 Weight [kg/1] 0.03 0.03 Units per Package 10 10 10 Class grl (gs) Power Loss UL 248-13 Pre-arcing I 2 t [W] [A 2 s] 1.9 8 2.3 12 2.8 25 3.0 46 3.2 100 3.8 190 4.0 250 4.2 370 4.4 420 Total I 2 t @ 660V AC [A 2 s] 60 90 190 340 740 1 400 1 900 2 800 3 100 5012434 5012634 5012934 Accessories Fuse Modules - DIN Rail Mounting w/lockout Clip Page Fuse Clips 5105805.1 1-Pole 6100101.2 Fuse Clips Screw mounting 493 5105805.1L 1-Pole w/neon lamp indicator 6301701 Clamping plate for 6100101.2 5105805.1S 1-Pole w/microswitch 5805806 Fuse Clips PCB mounting 5105805.2 2-Pole 5105805.2L 2-Pole w/neon lamp indicator 5105805.2S 2-Pole w/microswitch 750V/50A 5105805.3 3-Pole 5105805.3L 3-Pole w/neon lamp indicator E186970 5105805.3S 3-Pole w/microswitch Page 497 472
URZ URZ E180276 Size 14x51mm Rated Voltage Rated Breaking Test [Un] Capacity Voltage 700V AC UL 690V AC IEC 200kA 660Vac 440V DC, L/R=30ms 30kA Class grl (gs) UL 248-13 Coefficients for Heavy Duty Applications a A2 B1 B2 Cf3 130 1.0 1.25 0.5 0.8 Cut-Off current Characteristics Time-Current Characteristics Cut-Off Current - Peak [ka] Virtual Pre-arcing time - [s] Prospective Short Circuit Current [ka] (Symmetrical r.m.s.) R.M.S. Prospective Current [A] Arc voltage diagram Reduction factor for I 2 t total Reduction factor for power loss.. U L (V A C ) K B K W........ U B (V AC ). U B (V A C )..... I B (I N ) 473
URZ URZ E180276 Size 22x58mm Rated Voltage [Un] 700V AC UL 690V AC IEC Rated Without With Without With Power Pre-arcing Total Current Indicator Striker Indicator Striker Loss I 2 t I 2 t I n UL UL 80mm UL 80mm UL @ 660V AC [A] Article Number rec Article Number rec Article Number rec Article Number rec [W] [A 2 s] [A 2 s] 6 5014006.6 5014206.6 5014506.6 5015406.6 3.0 2 10 8 5014006.8 5014206.8 5014506.8 5015406.8 3.5 4 20 10 5014006.10 5014206.10 5014506.10 5015406.10 4.0 6 30 12 5014006.12 5014206.12 5014506.12 5015406.12 4.8 8 35 16 5014006.16 5014206.16 5014506.16 5015406.16 5.5 12 53 20 5014006.20 5014206.20 5014506.20 5015406.20 6.0 21 91 25 5014006.25 5014206.25 5014506.25 5015406.25 7.2 32 140 32 5014006.32 5014206.32 5014506.32 5015406.32 9.6 63 315 40 5014006.40 5014206.40 5014506.40 5015406.40 12 140 610 50 5014006.50 5014206.50 5014506.50 5015406.50 15 210 910 63 5014006.63 5014206.63 5014506.63 5015406.63 16 510 2 260 80 5014006.80 5014206.80 5014506.80 5015406.80 18 1 000 4 400 100 5014006.100 5014206.100 5014506.100 5015406.100 19 2 050 8 900 125* 5014006.125 5014206.125 5014506.125 5015406.125 23 3 000 22 000 135* 5014006.135 5014206.135 5014506.135 5015406.135 26 3 500 25 000 Weight [kg / 1] 0.055 Units per Package 1 * Power loss limit of base or module must be cosidered Rated Breaking Test Class Capacity Voltage gr100a 200kA 660Vac ar125a UL 248-13 IEC 60 269-4 DIN EN 60 269-4 VDE 0636 Part 4 5014006 5014206 Accessories 5014506 / 5015406 Fuse Modules - DIN Rail Mounting w/lockout Clip 5106005.1 1-Pole 5106005.1L 1-Pole w/neon lamp indicator 5106005.1S 1-Pole w/microswitch 5106005.2 2-Pole 5106005.2L 2-Pole w/neon lamp indicator 5106005.2S 2-Pole w/microswitch 5106005.3 3-Pole 5106005.3L 3-Pole w/neon lamp indicator 5106005.3S 3-Pole w/microswitch Page 494 750V/100A E186970 Fuse Clips & Terminal Links 6100201.3 Fuse Clips Screw mounting 6300201 Clamping plate for 6100201.3 6100201.4 Terminal Link for 6100201.3 5806006 Fuse Clips PCB mounting Page 497-498 474
URZ URZ E180276 Size 22x58mm Rated Voltage [Un] 700V AC UL 690V AC IEC Rated Breaking Test Capacity Voltage 200kA 660Vac Class gr100a ar125a UL 248-13 IEC 60 269-4 DIN EN 60 269-4 VDE 0636 Part 4 Coefficients for Heavy Duty Applications a A2 B1 B2 Cf3 170 0.6 1.25 0.6 0.8 Cut-Off current Characteristics Time-Current Characteristics Cut-Off Current - Peak [ka] Virtual Pre-arcing time - [s] Prospective Short Circuit Current [ka] (Symmetrical r.m.s.) R.M.S. Prospective Current [A] E14006_60_1 Arc voltage Reduction factor Reduction factor for diagram for I 2 t total power loss 1400 1.2 1.0 1200 1.0 0.8 UL V AC 1000 K B 0.8 K w 0.6 800 0.6 0.4 600 0.4 0.2 400 100 300 500 700 U V B AC 0.2 100 300 500 700 UB V AC 0 0 0.2 0.4 0.6 0.8 1.0 I I B N 475
URZ URZ Rated Voltage Rated Breaking Test Class [Un] Capacity Voltage grl UL 248-13 700V AC UL (gs) IEC 60 269-4 200kA 660V E180276 690V AC IEC AC DIN EN 60 269-4 Size 22x58mm 440V DC 30kA 440V DC (L/R=30ms) VDE 0636 Part 4 Rated Without With Striker Without Without Power Pre-arcing Total Current Indicator Indicator Indicator Loss I 2 t I 2 t I n UL UL 80mm UL PCB UL @ 660V AC [A] Article Number rec Article Number rec Article Number rec rec [W] [A 2 s] [A 2 s] 25 5014034.25 5014234.25 5014534.25 5014634.25 3.6 100 800 30 5014034.30 5014234.30 5014534.30 5014634.30 4.6 190 1 500 32 5014034.32 5014234.32 5014534.32 5014634.32 4.8 250 2 000 35 5014034.35 5014234.35 5014534.35 5014634.35 5.0 370 3 000 40 5014034.40 5014234.40 5014534.40 5014634.40 5.2 420 3 400 50 5014034.50 5014234.50 5014534.50 5014634.50 5.4 870 7 000 63 5014034.63 5014234.63 5014534.63 5014634.63 6.8 1 300 10 500 80 5014034.80 5014234.80 5014534.80 5014634.80 7.5 2 500 20 000 100 5014034.100 5014234.100 5014534.100 5014634.100 9.7 4 600 37 000 Weight [kg / 1] 0.055 Units per Package 1 5014034 5014234 5014634 Accessories 5014534 Fuse Modules - DIN Rail Mounting w/lockout Clip Page Fuse Clips & Terminal Links 5106005.1 1-Pole 6100201.3 Fuse Clips Screw mounting 5106005.1L 1-Pole w/neon lamp indicator 494 6300201 Clamping plate for 6100201.3 5106005.1S 1-Pole w/microswitch 6100201.4 Terminal Link for 6100201.3 5106005.2 2-Pole 5806006 Fuse Clips PCB mounting 5106005.2L 2-Pole w/neon lamp indicator 5106005.2S 2-Pole w/microswitch 750V/100A 5106005.3 3-Pole 5106005.3L 3-Pole w/neon lamp indicator E186970 51060 5.3S 3-Pole w/microswitch Page 497-498 476
URZ URZ E180276 Size 22x58mm Rated Voltage [Un] 700V AC UL 690V AC IEC 440V DC Rated Breaking Test Capacity Voltage 200kA 30kA 660V AC 440V DC Class grl (gs) UL 248-13 IEC 60 269-4 DIN EN 60 269-4 VDE 0636 Part 4 Coefficients for Heavy Duty Applications a A2 B1 B2 Cf3 130 1.0 1.25 0.6 0.8 Cut-Off current Characteristics Time-Current Characteristics Cut-Off Current - Peak [ka] Virtual Pre-arcing time - [s] Prospective Short Circuit Current [ka] (Symmetrical r.m.s.) R.M.S. Prospective Current [A] Arc voltage diagram Reduction factor for I 2 t total Reduction factor for power loss.. U L (V AC ) KB KW........ U B (V AC ). U B (V A C )..... I B ( I ) N 477
URZ URZ E180276 Size 6.3x32mm Rated Current I n [A] Rated Voltage [Un] 700V AC / 500V AC 500V DC UL rec 0.100 7012540.0.100 20kA@500V DC 2 500 0.3 0.0009 0.003 0.125 7012540.0.125 50kA@700V AC 20kA@500V DC 1 600 0.3 0.0017 0.006 0.160 0.200 0.250 0.315 0.400 0.500 0.630 0.800 1 1.25 1.6 2 7012540.0.160 7012540.0.200 7012540.0.250 7012540.0.315 7012540.0.400 7012540.0.500 7012540.0.630 7012540.0.800 7012540.1 7012540.1.25 7012540.1.6 7012540.2 50kA@700V AC 50kA@700V AC 50kA@700V AC 50kA@700V AC 50kA@700V AC 50kA@700V AC 50kA@700V AC 50kA@700V AC 50kA@700V AC 50kA@700V AC 50kA@700V AC 50kA@700V AC 20kA@500V DC 20kA@500V DC 20kA@500V DC 20kA@500V DC 20kA@500V DC 20kA@500V DC 20kA@500V DC 20kA@500V DC 20kA@500V DC 20kA@500V DC 20kA@500V DC 20kA@500V DC 2 000 900 800 700 650 650 650 600 750 700 650 650 0.4 0.2 0.2 0.3 0.3 0.4 0.5 0.5 0.8 0.9 1.1 1.4 0.004 0.01 0.02 0.04 0.07 0.12 0.15 0.23 0.32 0.20 0.31 0.64 0.014 0.035 0.08 0.14 0.25 0.48 0.5 0.8 1.1 0.8 1.1 2.2 @ 600V AC 2.5 3.15 4 5 6.3* 8* 10* Ceramic Article Number 7012540.2.5 7012540.3.15 7012540.4 7012540.5 7012540.6.3 7012540.8 7012540.10 Rated Breaking Current [A] AC 50kA@600V AC 50kA@600V AC 50kA@600V AC 50kA@600V AC 50kA@600V AC 50kA@600V AC 50kA@600V AC Rated Breaking Test Capacity Voltage 50kA 700V AC / 500V AC 30kA 500V DC Rated Breaking Current [A] DC 20kA@500V 1 DC 20kA@500V 1 DC 20kA@500V 1 DC 20kA@500V 1 DC 20kA@500V 1 DC Voltage Drop [mv] 550 500 450 400 400 350 350 Class FF Power Loss @ 1/1.2xI n [W] 1.4 1.6 1.8 2.0 4 4.5 5 Company Standard Pre-arcing I 2 t 1.2 2 5 10 3 6.5 12 [A 2 s] Total I 2 t @ U rated [A 2 s] @ 700V AC 3 5 13 25 14 30 55 12.5* 16* 20* 7012540.12.15 7012540.16 7012540.20 50kA@500V AC 50kA@500V AC 50kA@500V AC 300 300 300 7 9 11 18 31 46 25* 7012540.25 50kA@500V AC 230 11 87 Weight (kg per 100) * Consideration should be given for heat dissipation 0.24 Units per Package 1 2.5A -10A, 50KA@600V AC 10 @ 500V AC 80 140 200 370 7012540 Accessories Fuse Clips 199429 PCB Page 495 Press on Cap Leads 204100 up to 12.5A maximum 204101 up to 20A maximum Page 495 478
URZ URZ E180276 Size 6.3x32mm Rated Voltage [Un] 700V AC 500V AC Rated Breaking Test Capacity Voltage 50kA 700V AC 30kA 500V AC Class FF Company Standard Rated Current 100mA 800mA 1A 5A 6.3A 20A 1.0I n > 1hr > 1hr 1.2I n 2.75I n 4I n 10I n > 1hr 70 125 40 4ms 150ms 4ms 300ms < 60ms 1ms 25ms 1ms 30ms < 6ms < 5ms < 2ms Normalized Current, Time-Current Characteristics t sec. 4 10 Type 7012540 100mA- 800mA 1A- 5A t sec. 4 10 Type 7012540 6.3A - 20A 3 10 3 10 2 10 2 10 1 10 1 10 10 0 100-1 10-1 10-2 10-2 10-3 10 1 2 3 4 5 6 7 8 9 10 I Irat. 15-3 10 1 2 3 4 5 6 7 8 910 15 I Ir at. 479
URZ URZ E180276 Size 10x38mm Rated Voltage [Un] 700V AC -UL 690V AC -IEC Rated Breaking Test Capacity Voltage 200kA 660V AC Class gr UL 248-13 IEC 60 699-4 DIN EN 60 269-4 DIN VDE 0636-Part 4 Rated Without Without Without Power Pre-arcing Current Indicator Indicator Indicator Loss I 2 t I n UL PCB UL 50.6mm UL [A] Article Number rec Article Number rec Article Number rec [W] [A 2 s] 1 5017906.1 5018106.1 5018006.1 1.0 0.13 2 5017906.2 5018106.2 5018006.2 1.8 0.64 3 5017906.3 5018106.3 5018006.3 1.6 2.6 4 5017906.4 5018106.4 5018006.4 1.1 0.8 5 5017906.5 5018106.5 5018006.5 1.5 2.0 6 5017906.6 5018106.6 5018006.6 1.8 3.0 8 5017906.8 5018106.8 5018006.8 1.8 3.1 10 5017906.10 5018106.10 5018006.10 2.3 5.1 12 5017906.12 5018106.12 5018006.12 2.8 7.4 16 5017906.16 5018106.16 5018006.16 3.7 13 20 5017906.20 5018106.20 5018006.20 4.7 29 25 5017906.25 5018106.25 5018006.25 5.4 52 30 5017906.30 5018106.30 5018006.30 6.4 81 Weight (kg per 1) 0.009 Units per Package 10 Total I 2 t @ 660V AC [A 2 s] 1.6 8.0 32 10 25 38 39 64 93 164 360 650 1 010 5017906 5018006 5018106 Accessories Fuse Modules - DIN Rail Mounting Page Fuse Clips 5106304. 1-Pole 5806316 Fuse Clips PCB mounting 492 5106304.L 1-Pole w/neon lamp indicator 5806319 Fuse Clips PCB mounting 5106304.2 2-Pole 5806317 Fuse Clips Screw mounting 5106304.2L 2-Pole w/neon lamp indicator 6301701 Clamping plate for 5806301 5106304.3 3-Pole 6101701.3 Terminal bar for 5806301 5106304.3L 3-Pole w/neon lamp indicator E186970 Page 496 496 480
URZ URZ E180276 Size 10x38mm Rated Voltage [Un] 700V AC -UL 690V AC -IEC Rated Breaking Test Capacity Voltage 200kA 660V AC Class gr UL 248-13 IEC 60 699-4 DIN EN 60 269-4 DIN VDE 0636-Part 4 Coefficients for Heavy Duty Applications a A2 B1 B2 Cf3 150 0.6 1.25 0.5 0.8 Cut-Off current Characteristics Time-Current Characteristics Cut-Off Current - Peak [ka] Virtual Pre-arcing time - [s] Prospective Short Circuit Current [ka] (Symmetrical r.m.s.) R.M.S. Prospective Current [A] E17906-60_2 Arc voltage Reduction factor diagram for I 2 t total Reduction factor for power loss 1500 1.2 1.0 1300 1.0 0.8 UL V AC 1100 K B 0.8 K w 0.6 900 0.6 0.4 700 0.4 0.2 500 100 300 500 700 U V B AC 0.2 100 300 500 700 U V B AC 0 0 0.2 0.4 0.6 0.8 1.0 I I B N 481
URZ URZ E180276 Size 14x51mm Rated Current I n [A] 6 8 10 12 16 20 25 30 35 40 50 Without Indicator UL Article Number rec 5011806.6 5011806.8 5011806.10 5011806.12 5011806.16 5011806.20 5011806.25 5011806.32 5011806.32 5011806.40 5011806.50 Weight [kg / 1] 0.03 Units per Package 10 Rated Voltage [Un] 700V DC Rated Breaking Test Capacity Voltage 50kA 700V DC Class ar UL 248-13 Power Pre-arcing Total Loss I 2 t I 2 t* @ 700V DC [W] [A 2 s] [A2s] 1.3 12 1.7 2.9 17 2.6 3.9 25 3.1 6.5 41 4.7 8.0 52 6.0 12 70 7.6 20 130 9.8 32 190 10.3 72 430 11.2 103 620 12.6 128 770 *L/R=1ms 2.0 5011806 Accessories Fuse Modules - DIN Rail Mounting w/lockout Clip Page Fuse Clips 5105805.1DC 1-Pole 6100101.2 Fuse Clips Screw mounting 5105805.1LDC 1-Pole w/neon lamp indicator 493 6301701 Clamping plate for 6100101.2 5105805.2DC 2-Pole 5805806 Fuse Clips PCB mounting 5105805.2LDC 2-Pole w/neon lamp indicator Page 497 750V/50A E186970 482
URZ URZ E180276 Size 14x51mm Rated Voltage Rated Breaking Test Class [Un] Capacity Voltage ar UL 248-13 700V DC 50kA 700V DC Coefficients for Heavy Duty Applications a A2 B1 B2 Cf3 130 0.55 1.25 0.6 0.8 Time-Current Characteristics Virtual Pre-arcing time - [s] R.M.S. Prospective Current [A] Arc voltage Reduction factor Reduction factor for diagram for I 2 t total power loss U L VDC 1200 1000 800 L R 100 80 60 I p > 6 x In K w 1.0 0.8 0.6 600 40 0.4 400 20 0.2 200 200 400 600 800 U V B DC 0 200 400 600 800 U V B DC 0 0 0.2 0.4 0.6 0.8 1.0 I I B N 483
URZ 1202103 p7 SIBA UR 175 516pp 8/22/13 3:32 PM Page 215 URZ E180276 Size 14x51mm Rated Voltage [Un] 700V DC Rated Breaking Test Capacity Voltage 30kA 700V DC Class ar UL 248-13 Rated Without Without Power Pre-arcing Current Indicator Indicator Loss I 2 t I n UL 63mm UL [A] Article Number rec Article Number rec [W] [A 2 s] 10 5020106.10 5020206.10 1.1 12 12 5020106.12 5020206.12 1.2 20 16 5020106.16 5020206.16 2.0 32 20 5020106.20 5020206.20 2.3 63 25 5020106.25 5020206.25 3.1 82 32 5020106.32 5020206.32 4.1 130 40 5020106.40 5020206.40 4.6 250 50 5020106.50 5020206.50 7.0 330 63 5020106.63 5020206.63 9.5 512 Weight [kg / 1] 0.022 Units per Package 10 Total I 2 t* @ 700V AC [A 2 s] 67 120 190 360 480 740 1 460 1 900 3 900 *L/R=1ms 5020206 Accessories Fuse Modules - DIN Rail Mounting w/lockout Clip Page Fuse Clips 5105805.1 1-Pole 6100101.2 Fuse Clips Screw mounting 5105805.1L 1-Pole w/neon lamp indicator 493 6301701 Clamping plate for 6100101.2 5105805.1S 1-Pole w/microswitch 5805806 Fuse Clips PCB mounting 5105805.2 2-Pole 5105805.2L 2-Pole w/neon lamp indicator 5105805.2S 2-Pole w/microswitch 750V/50A 5105805.3 3-Pole 5105805.3L 3-Pole w/neon lamp indicator E186970 5105805.3S 3-Pole w/microswitch Page 497 484
URZ URZ E180276 Size 14x51mm Rated Voltage Rated Breaking Test Class [Un] Capacity Voltage ar UL 248-13 700V DC 30kA 700V DC Coefficients for Heavy Duty Applications a A2 B1 B2 Cf3 130 0.55 1.25 0.6 0.8 Time-Current Characteristics Virtual Pre-arcing time - [s] R.M.S. Prospective Current [A] E20106-60_0 Arc voltage Reduction factor Reduction factor for diagram for I 2 t total power loss 1200 100 1.0 I p > 6 x In UL VDC 1000 800 L R 80 60 0.8 K w 0.6 600 40 0.4 400 20 0.2 200 200 400 600 800 U V B DC 0 200 400 600 800 U V B DC 0 0 0.2 0.4 0.6 0.8 1.0 I I B N 485
URZ URZ Rated Voltage [Un] 1000V AC Rated Breaking Test Capacity Voltage 100kA 1000V AC Class ar IEC 60 269-4 VDE 0636 Part 40 Size 27x60mm Rated Without With Striker Power Pre-arcing Total Current I n Indicator Loss I 2 t I 2 t @ 1000V AC [A] Article Number Article Number [W] [A 2 s] [A 2 s] 25 5019620.25 5019720.25 15 21 135 32 5019620.32 5019720.32 17 32 210 40 5019620.40 5019720.40 17 82 530 50 5019620.50 5019720.50 20 141 920 63 5019620.63 5019720.63 22 250 1 630 80 5019620.80 5019720.80 24 512 3 330 100 5019620.100 5019720.100 26 1 000 6 500 125 5019620.125 50197 0.125 26 2 260 14 700 160 5019620.160 5019720.160 34 4 600 30 000 170 5019620.170 5019720.170 30 7 790 50 600 Weight [kg / 1] 0.06 Units per Package 10 5019620 5019720 Accessories Fuse Clips & Terminal Links 6100401.3 Fuse Clips Screw mounting 6300201 Clamping plate for 6100401.3 Page 498 Page 486
URZ URZ Rated Voltage [Un] 1000V AC Rated Breaking Test Capacity Voltage Class ar IEC 60 269-4 VDE 0636 Part 40 Size 27x60mm Coefficients 100kA for Heavy Duty Applications 1000V AC a A2 B1 B2 Cf3 130 0.6 1.25 0.6 0.8 Cut-Off current Characteristics Time-Current Characteristics Cut-Off Current - Peak [ka] Virtual Pre-arcing time - [s] Prospective Short Circuit Current [ka] (Symmetrical r.m.s.) R.M.S. Prospective Current [A] Arc voltage diagram Reduction factor for I 2 t total Reduction factor for power loss 2000 1.2 1.0 1900 1.0 0.8 U L V AC 1800 K B 0.8 K w 0.6 1700 0.6 0.4 1600 0.4 0.2 1500 500 700 900 1100 U V B AC 0.2 500 700 900 1100 U V B AC 0 0 0.2 0.4 0.6 0.8 1.0 I I B N 487
URZ URZ-DM E167295 Size 6.3x32mm Rated Current I n [A] 0.100 0.125 0.160 0.200 0.315 0.400 Ceramic Article Number 7017240.0.100 7017240.0.125 7017240.0.160 7017240.0.250 0.250 7017240.0.200 7017240.0.315 7017240.0.400 7017240.0.500 0.500 0.630 7017240.0.630 0.800 7017240.0.800 1 7017240.1 1.6 7017240.1.6 2 7017240.2 Weight (kg per 100) Units per Package 10 Rated Voltage [Un] 1000V AC 1000V DC Rated Breaking Test Capacity Voltage 30kA 1000V AC 30kA 1000V DC Class FF (ar) Company Standard Rated Voltage Power Pre-arcing Breaking Drop Loss I 2 t UL rec Current [A] * 30kA @ 1000V AC/DC @ I n [mv] 2 500 @ I n [W] 0.3 @ 10I n [A 2 s] 0.0009 * 30kA @ 1000V AC/DC * 30kA @ 1000V AC/DC * 30kA @ 1000V AC/DC * 30kA @ 1000V AC/DC * 30kA @ 1000V AC/DC * 30kA @ 1000V AC/DC * 30kA @ 1000V AC/DC 30kA @ 1000V AC/DC 30kA @ 1000V AC/DC 30kA @ 1000V AC/DC 30kA @ 1000V AC/DC 30kA @ 1000V AC/DC 2 200 2 000 900 800 700 650 650 650 600 750 650 650 0.3 0.4 0.2 0.2 0.3 0.3 0.4 0.5 0.5 0.8 1.1 1.4 0.0017 0.004 0.01 0.02 0.04 0.07 0.12 0.15 0.23 0.32 0.31 0.64 *Additional testing 50kA @ 1000Vac/dc Normalized Current Time-Current Characteristics 4 10 Typ e Fusing Time Limits 7017240 t sec. 3 10 7017240 100mA - 800mA 1A - 2A Rated Current 100mA 800mA 1A 2A 1.0I n 2.75I n 4I n 70 172 40 > 1hr < 60ms 1ms > 1hr 25ms 10I n < 6ms < 6ms 2 10 1 10 100-1 10-2 10 Accessories -3 10 1 2 3 4 5 6 7 8 9 10 15 I r at. Fuse Clips Page Press on Cap Leads Page 199429 PCB 495 204100 up to 12.5A maximum 495 204101 up to 20A maximum 488
URZ URZ - DMI E180276 Size 10x35mm Rated Current I n [A] 0.200 0.250 0.315 0.400 0.440 Without Indicator UL Article Number rec 5021006.0.200 5021006.0.250 5021006.0.315 5021006.0.400 5021006.0.440 Weight (kg per 100) 0.8 Units per Package 10 Rated Voltage [Un] 1000V AC 1000V DC Rated Breaking Test Capacity Voltage 30kA 1000V AC 30kA 1000V DC Power Loss [W] 0.12 0.13 0.16 0.2 0.2 Pre-arcing Coeffic i 100 ents k fo A r Heavy Duty App 1000 licavti AC ons a A2 B1 B2 Cf3 150 0.6 1.25 0.6 0.8 I 2 t Class ar Total I 2 t* @ 1000V AC [A 2 s] [A 2 s] 0.2 0.4 0.15 0.28 0.7 0.5 0.11 0.8 0.17 1.2 Company Standard Total I 2 t* @ 1000V DC [A 2 s] 0.12 0.2 0.4 0.7 1 Cold Resistance @ 20C [m] 2 720 2 000 1 530 1 200 980 Time-Current Characteristics 5021006 Virtual Pre-arcing time - [s] R.M.S. Prospective Current [A] Accessories Fuse Modules - DIN Rail Mounting 5106304.DC 1-Pole w/neon lamp indicator 5106304.2DC 2-Pole Page 492 Fuse Clips 5806316 Fuse Clips PCB mounting 5806319 Fuse Clips PCB mounting Fuse Clips Screw mounting Clamping plate for 5806301 6101701.3 Terminal bar for 5806301 5806317 6301701 Page 496 496 489
URZ URZ - DMI E180276 Size 10x38mm Rated Voltage [Un] 1000V AC 1000V DC Rated Breaking Test Capacity Voltage 1000V AC 30kA L/R=1ms 1000V DC Class gr UL 248-13 Rated Without Power Pre-arcing Total Current Indicator Loss I 2 t I 2 t* I n [A] 4 6 8 10 11 Article Number 5019906.4 5019906.6 5019906.8 5019906.10 5019906.11 UL rec [W] 0.5 0.7 1.1 1.5 1.6 [A 2 s] 3 5 7 10 17 @ 1000V DC [A 2 s] 25 40 55 77 130 12 15 16 5019906.12 5019906.15 5019906.16 1.6 1.8 2.1 20 30 30 155 230 230 Weight (kg per 100) * L/R = 5ms 0.8 Units per Package 10 5019906 Accessories Fuse Modules - DIN Rail Mounting 5106304.DC 1-Pole w/neon lamp indicator 5106304.2DC 2-Pole Page 492 Fuse Clips 5806316 Fuse Clips PCB mounting 5806319 Fuse Clips PCB mounting 5806317 Fuse Clips Screw mounting 6301701 Clamping plate for 5806301 6101701.3 Terminal bar for 5806301 Page 496 490
URZ URZ - DMI Rated Voltage [Un] Rated Breaking Test Capacity Voltage Class gr UL 248-13 E180276 Size 10x38mm 1000V AC 1000V DC 30kA L/R=1ms 1000V AC 1000V DC Coefficients for Heavy Duty Applications a A2 B1 B2 Cf3 150 0.6 1.25 0.5 0.8 Time-Current Characteristics Virtual Pre-arcing time - [s] R.M.S. Prospective Current [A] 491
URZ 492 URZ E341490 10x38mm DIN Rail Mounting Rated voltage; UL/IEC 1000V DC Rated Voltage 1000V DC Accessories Fuse Modules w/lamp indicator 5106305 DC Series for 10x38mm 1000V DC Fuse Links Article No. Rated current; 30A UL, 32A IEC Power acceptance; 4W Conductor solid; 0.75mm 2-16mm 2 Conductor stranded; 0.75mm 2-16mm 2 Maximum torque; 2.5N m Utilization Category AC-21B 690V - DC-20B 1000V Pollution degree; 3 Rated insulation voltage; U imp = 6kV Degree of protection; IP-20* Construction, body & handle; Thermoplastic Polyester Contacts; copper-silver plated Flammability "UL 94"; V0 Operating and storage temperature range; -50⁰C to +85⁰C** Rating of light indicator; 350V DC - 1000V DC *Depends on connection and mounting parts; Contact SIBA for stranded wire 6mm 2 or solid wire 10mm 2 ** Avoid handling of lever during installation or maitenance below -20⁰C Important: DO NOT OPEN UNDER LOAD! 5105805 DC Series for 14x51mm 1000V DC Fuse Links Article No. UL 4248-1 CSA 22.2 IEC 60269-1 & 2 (Not UL ) IEC 60947-1 & 3 14x51mm DIN Rail Mounting Rated voltage; IEC 1000V DC, 690V AC Rated current; 50A UL, 50A IEC Power acceptance; 6W Conductor solid; 1.5mm 2-35mm 2 Conductor stranded; 1.5mm 2-25mm 2 Utilization Category AC-21B 690V - DC-20B 1000V Pollution degree; 3 Rated insulation voltage; U imp = 8kV Degree of protection; IP-20* Construction, body & handle; Thermoplastic Polyester Contacts; copper-silver plated Flammability "UL 94"; V0 Operating and storage temperature range; -50⁰C to +85⁰C** Rating of light indicator; -350V DC - 1000V DC *Depends on connection and mounting parts; Contact SIBA for stranded wire 10mm 2 or solid wire 10mm 2 ** Avoid handling of lever during installation or maitenance below -20⁰C Important: DO NOT OPEN UNDER LOAD! UL 4248-1 & -18 CSA 22.2 UL 486E IEC 60269-1 & -2 IEC 60947-1 & -3 Description 5106305.1DC No Indicator 1-Pole 5106305.1LDC w/ Neon Lamp Indicator 5106305.2DC No Indicator 2-Pole 5106305.2LDC w/ Neon Lamp Indicator Fuse module current derating for adjacent pole with direct contatact Number of Poles De-rating factor 1-3 1.0XI n 4-6 0.8XI n 7-9 0.7XI n 10 0.6XI n E341490 Description 5105805.1DC No Indicator 5105805.1LDC 1-Pole w/ Neon Lamp Indicator 5105805.1SDC w/ Microswitch 5105805.2DC No Indicator 2-Pole 5105805.2LDC w/ Neon Lamp Indicator Fuse module current derating for adjacent pole with direct contatact Number of Poles De-rating factor 1-4 1.0XI n 5-6 0.8XI n 7-9 0.7XI n 10 0.6XI n
URZ URZ E186970 Rated Voltage 750V AC -UL 690V AC / 750V DC -IEC w/lamp indicator Accessories Fuse Modules UL 4248-1 CSA 22.2 IEC 60269-1 & 2 VDE 0636-1 & 2 IEC 60947-1 & 2 VDE 0660-100 & 107 5106305 5105805 5106005 10mm x 38mm 14mm x 51mm 22mm x 58mm Rated voltage; UL(rec) 750V AC/DC 750V AC 750V AC Rated voltage; IEC 690V AC / 750V DC 690V AC 690V AC Rated current; Power acceptance - rated/maximum; Conductor solid; Conductor stranded; Maximum torque; Utilization Category: AC-21B 690V Pollution degree; Rated insulation voltage; U imp = 6kV Degree of protection; IP-20* Construction, body & handle; Contacts; Flammability "UL 94"; Operating temperature range; Rating of light indicator; *Depends on connection and mounting parts; Contact SIBA for; stranded wire or solid wire or solid wire ** Avoid handling of lever during installation or maitenance below -20⁰C Important: DO NOT OPEN UNDER LOAD! 30A UL, 32A IEC 50A UL, 50A IEC 100A UL, 100A IEC 3W/4W 5W/6W 9.5W/12W 0.75mm 2-16mm 2 0.75mm 2-16mm 2 1.5mm 2-35mm 2 1.5mm 2-25mm 2 1.5mm 2-50mm 2 1.5mm 2-35mm 2 2.5N m 2.5N m - 3N m 3.5N m - 4N m DC-20B 750V AC-22B 500V 3 3 3 U imp = 6kV U imp = 8kV U imp = 8kV Contact SIBA* Contact SIBA* Contact SIBA* Thermoplastic Polyester copper-silver plated V0 V0 V0-50⁰C to +85⁰C** 120V AC/DC - 750V AC/DC 230V AC/DC - 750V AC/DC 230V AC/DC - 750V AC/DC 6mm 2 10mm 2 16mm 2 10mm 2 16mm 2 25mm 2 5106305 Series for 10x38mm Fuse Links Article No. 5106305.1 No indicator 1-Pole 5106305.1L w/ Neon lamp indicator 5106305.2 No indicator 2-Pole 5106305.2L w/ Neon lamp indicator 5106305.3 No indicator 3-Pole 5106305.3L w/ Neon lamp indicator 5106305.4 No indicator 4-Pole 5106305.4L w/ Neon lamp indicator Fuse module current derating for adjacent pole with direct contatact Number of Poles De-rating factor 1-3 1.0XI n 4-6 0.8XI n 7-9 0.7XI n 10 0.6XI n 750V/30A 493
URZ URZ E186970 Rated Voltage 750V AC -UL 690V AC - 750V DC - IEC w/lamp indicator Accessories UL 4248-1 Fuse Modules IEC 60269-1 & 2 VDE 0636-1 & 2 IEC 60947-1 & 2 VDE 0660-100 & 107 5105805 Series for 14x51mm Fuse Links Article No. 5105805.1 5105805.1L 5105805.1S 5105805.2 5105805.2L 5105805.2S 5105805.3 515805.3L 5105805.3S 1-Pole 2-Pole 3-Pole Description No indicator w/ Neon lamp indicator w/ Microswitch No indicator w/ Neon lamp indicator w/ Microswitch No indicator w/ Neon lamp indicator w/ Microswitch Fuse module current derating for adjacent pole with direct contatact Number of Poles De-rating factor 1-3 1.0XI n 4-6 0.8XI n 7-9 0.7XI n 10 0.6XI n 750V/50A Article No. 5106005.1 5106005.1L 5106005.1S 5106005.2 5106005.2L 5106005.2S 5106005.3 5106005.3L 5106005.3S 1-Pole 2-Pole 3-Pole Description No indicator w/ Neon lamp indicator w/ Microswitch No indicator w/ Neon lamp indicator w/ Microswitch No indicator w/ Neon lamp indicator w/ Microswitch Fuse module current derating for adjacent pole with direct contatact Number of Poles De-rating factor 1-3 1.0XI n 4-6 0.8XI n 7-9 0.7XI n 10 0.6XI n 5106005 Series for 22x58mm Fuse Links 750V/125A Lockout Clip 5106005.101 494
URZ URZ Accessories Fuse Clips Fuse Press on Caps with Axial Leads and Clips for 5mm and 6.3mm Diameter Contacts Fuse Press on Caps with Axial Leads 5mm Diameter fuses 6.3mm Diameter fuses 204000 Lead diameter Rated Current Lead diameter Rated Current D[mm] Maximum [A] D[mm] Maximum [A] 0.65 6.3 204100 0.8 12.5 204001 0.8 10 204101 0.8 20 204002 1.0 16 Fuse Clips for 5mm and 6.3mm diameter fuses 199073 199207 199429 199487 495
URZ URZ Accessories Fuse Clips Fuse Clips for 10mm Diameter Contacts 5806316 Dimensions [ in / mm] 5806316 5806319 0.43 / 11.0 A 0.43 / 11.0 0.47 / 12.0 B 0.47 / 12.0 0.71 / 18.0 C 0.71 / 18.0 0.14 / 3.6 D 0.14 / 3.6 0.08 / 2.0 E E 1 0.08 / 2.0 E 2 0.12 / 3.0 0.03 / 0.65 F 0.03 / 0.65 0.43 / 11.0 G 0.43 / 11.0 0.18 / 4.45 H 0.18 / 4.45 0.06 / 1.5 I 0.06 / 1.5 0.22 / 5.5 J 0.22 / 5.5 0.45 / 11.5 L 0.45 / 11.5 5806319 5806317 Dimensions [ in / mm] 5806317 6301701 0.43 / 11.0 A 0.39 / 10.0 0.47 / 12.0 B 0.35 / 9.0 0.71 / 18.0 C 0.08 / 2.0 0.17 / 4.2 D 0.17 / 4.2 E 0.03 / 0.65 F G H 0.06 / 1.5 I 0.22 / 5.5 J 6301701 Dimensions [ in / mm] 6101701.3 A 0.83 / 21.0 B 0.24 / 6.0 C 0.08 / 2.0 D 1 / M5 D 2 / M4 E 0.61 / 15.5 F 0.43 / 11.0 G 0.22 / 5.5 6101701.3 496
URZ URZ Accessories Fuse Clips 6100101.2 Fuse Clips for 14mm Diameter Contacts Dimensions [ in / mm] 6100101.2 6301701 0.61 / 15.5 A 0.39 / 10.0 0.61 / 15.5 B 0.35 / 9.0 0.90 / 22.8 C 0.08 / 2.0 0.17 / 4.2 D 0.17 / 4.2 0.03 / 0.7 F 0.06 / 1.5 I 0.26 / 6.5 J 0.57 / 14.5 L 6301701 5805806 Dimensions [ in / mm] 5805806 0.63 / 16.0 A 0.47 / 12.0 B 0.61 / 15.5 C D E 0.14 / 3.5 E 1 0.20 / 5.0 E 2 0.03 / 0.70 F 0.42 / 10.7 G 0.17 / 4.2 H 0.04 / 1.0 I 0.12 / 3.0 K 0.33 / 8.5 L 6100201.3 Fuse Clips for 22mm Diameter Contacts Dimensions [ in / mm] 6100201.3 6300201 0.73 / 18.5 A 0.73 / 18.5 0.72 / 18.4 B 0.59 / 15.0 1.42 / 36.0 C 0.12 / 3.0 0.18 / 4.2 D / M4 0.31 / 8.0 E 0.31 / 8.0 0.05 / 1.2 F 0.31 / 8.0 0.08 / 2.0 G I 0.31/ 8.0 0.16 / 4.0 J 0.16 / 4.0 0.98 / 25.0 L 6300201 497
URZ URZ Accessories Fuse Clips Fuse Clips for 22mm Diameter Contacts Dimensions [ in / mm] 6100201.4 A 1.40 / 35.5 B 0.59 / 15.0 C 0.12 / 3.0 D 1 / M4 D 2 / M6 E 0.31 / 8.0 F 1 0.30 / 7.5 F 2 0.31 / 8.0 G 0.31 / 8.0 6100201.4 5806006 Dimensions [ in / mm] 5806006 0.67 / 17.0 A 0.79 / 20.0 B 0.91 / 23.0 C 0.08 / 2.0 D E 0.24 / 6.0 E 1 0.14 / 3.5 E 2 0.03 / 0.8 F 0.42 / 10.7 G 0.17 / 4.2 H 0.04 / 1.0 I 0.13 / 3.2 K 0.49 / 12.5 L Fuse Clips for 27mm Diameter Contacts Dimensions [ in / mm] 6100401.3 6300201 0.73 / 18.5 A 0.73 / 18.5 0.91 / 23.2 B 0.59 / 15.0 1.79 / 45.5 C 0.12 / 3.0 0.17 / 4.3 D / M4 0.31 / 8.0 E 0.31 / 8.0 0.05 / 1.2 F 0.31 / 8.0 G 0.31/ 8.0 0.08 / 2.0 I 0.16 / 4.0 J 0.16 / 4.0 1.14 / 29.0 L 6300201 6100401.3 498
URDC-PV URPV Fuses for PV Semiconductor Protection Class: gpv 0 Voltage ratings: 600V DC to 1500V DC Current ratings: 1 A to 450 A Standards: UL 2579 IEC 60 269-6 Approvals: E341342 E341490 Features and Benefits High interrupting ratings up to 30kA Low I 2 t values Fuse accessories available - Microswitches, Fuse Bases, 499
URDC-PV URPV UL 2579 Article Description Selection Guide Technical Data 600V DC 2018928 No blown fuse indication 2018929 NH00, DIN 80 With blown fuse indication 502 502-503 2041229 With fitting for microswitch 1000V DC 5021528 10x38mm 5021628 10x38mm - PCB Mount 5021728 10x38mm - 50.6mm mounting centers No blown fuse indication 504 504-505 5021828 10x38mm - For cable connection 1100V DC 5023528 14x65mm 5023728 14x65mm - 77.5mm mounting centers 5023828 10/14x85mm clip mounting No blown fuse indication 506 506-507 5023928 14x65mm for cable connection 2002828 2002829 NH1XL 2003328 SQB1 - US Short 2002929 NH2XL 2002929 SQB2 - US Short 2001828 SQB0 - M8 2001928 SQB1 - M8 2002028 SQB2 - M10 2002128 SQB3 - M12 2003128 2003129 2003428 2003429 2004728 2004528 2004129 2004229 2004328 2004428 2004628 2003628 5024028 5106305.1DC 5106305.1LDC 5106305.2DC 5106305.2LDC Accessories - Fuse Modules No blown fuse indication 10mmx38mm 1-Pole, 1000V DC w/ Neon Lamp Indicator 504 No blown fuse indication 10mmx38mm 2-Pole, 1000V DC w/ Neon Lamp Indicator Accessories - Fuse Base For use with microswitch 513 Fuse Base NH00 DIN80 With terminal covers Fuse Base NH1XL 508 Fuse Base NH3L 510 35A-200A, 3/0-10 CU9Al 200A-450A, 600kcmil -4/0CU9AlCU9Al 512 200A-450A, 2x250kcmil -6CU9Al 200A-450A, 2x250kcmil -6CU9Al Fuse base for 50 238 28 507 2118928 Fuse Base NH00 DIN80 2119028 2102828 2103128 PV1 Fuse Base PV2 Fuse Base PV3 Fuse Base PV4 Fuse Base 5123805 Fuses for PV Semiconductor Protection & Accessories No blown fuse indication With fitting for microswitch NH3L No blown fuse indication With fitting for microswitch SQB2 - US Long No blown fuse indication With fitting for microswitch 1500V DC SQB3 - US Short No blown fuse indication NH1XL - Knife blade No blown fuse indication NH1XL - SQB1- US Short With fitting for microswitch NH2XL - Knife blade With fitting for microswitch NH3L - Knife blade SQB0 - US Short SQB2 - US Short SQB3 - US Short 14mmx65mm With fitting for microswitch No blown fuse indication No blown fuse indication No blown fuse indication No blown fuse indication 508 509 510 512 513 508-509 510-511 500
URDC-PV URPV UL 2579 Fuse Accessories Accessories - Microswitcc 2800201 Microswitch 2800202 Accessories - Fuse Clips 5806316 10mm, PCB mounting 5806319 10mm, PCB mounting 5806317 10mm, screw mounting 6301701 Clamping plate for 58 063 17 6101701.3 Terminal link for 58 063 17 6100101.2 14mm, screw mounting 6301701 Clamping plate for 60 001 01.2 Fuse Clips 5805806 14mm, PCB mounting Grip Handle - Fuse Insertion-Removal Tool 2200102 Standard NH00-3, 690V AC 2200105 w/leather Sleeve 2212001 NH4a & NH4, 690V AC w/leather Sleeve 2203101 NH3, 1600V AC Standard 2203102 NH3, 1600V AC w/leather Sleeve 514 514 515 515 515 516 501
URDC-PV URPV E341342 Rated Voltage [Un] 600V DC Rated Breaking Test Capacity Voltage 30kA (L/R=1-3ms) 600V DC (UL) Class gpv UL 2579 IEC 60 269-2 Size NH00 - DIN 80 Rated Current I n Without indicator With Top Indicator With Top Indicator Power Pre-arcing Total and Fitting for Microswitch @600V DC [A] Article Number UL Article Number UL Article Number UL [W] [A 2 s] [A 2 s] 35 2018928.35 2018929.35 2041229.35 7.3 62 380 40 2018928.40 2018929.40 2041229.40 7.5 105 630 50 2018928.50 2018929.50 2041229.50 11.0 160 960 63 2018928.63 2018929.63 2041229.63 12.5 250 1 500 70 2018928.70 2018929.70 2041229.70 13.0 415 2 500 80 2018928.80 2018929.80 2041229.80 14.0 520 3 200 100 2018928.100 2018929.100 2041229.100 15.5 1 000 6 000 110 2018928.110 2018929.110 2041229.110 17.5 1 300 7 900 125 2018928.125 2018929.125 2041229.125 20.0 1 650 10 000 160 2018928.160 2018929.160 2041229.160 21.5 4 000 24 000 Weight [kg / 1] 0.78 Units per Package 1 IEC Part Numbers IEC - Contact SIBA for Data Sheets 2018926.(Amp) 2041226.(Amp) Loss I 2 t I 2 t* Microswitch 2018928 / 20 18929 2041229 Article Number 2119028 2118928 Accessories Fuse Base Page Article Number Microswitch - GL 80mm center, w/insulated covers 2800201 Standard (Black Hammer) 513 80mm center, use w/microswitch Page 514 502
URDC-PV URPV E341342 Rated Voltage Rated Breaking Test Class [Un] Capacity Voltage gpv UL 2579 1100V DC 30kA (L/R=1-3ms) 1100V DC (UL) IEC 60 269-2 Size NH00 - DIN 80 Coefficients for Heavy Duty Applications a A2 B1 B2 Cf3 130 0.8 1.25 0.5 0.8 Time-Current Characteristics Virtual Pre-arcing time - [s] R.M.S. Prospective Current [A] 503
URDC-PV URPV Rated Voltage Rated Breaking Test Class [Un] Capacity Voltage gpv UL 2579 E341342 1000V DC 30kA (L/R=1-3ms) 1000V DC (UL) 1000V DC (IEC) IEC 60 269-6 Size 10x38mm Rated Current I n Without indicator Without indicator Without indicator Without indicator Power Pre-arcing PCB Offset Tabs Mounting for cable attachment [A] Article Number UL Article Number UL Article Number UL Article Number UL [W] [A 2 s] 3.5 5021528.3.5 5021628.3.5 5021728.3.5 5021828.3.5 1.5 8 4 5021528.4 5021628.4 5021728.4 5021828.4 1.8 10 5 5021528.5 5021628.5 5021728.5 5021828.5 2 20 8 5021528.8 5021628.8 5021728.8 5021828.8 1.9 3 10 5021528.10 5021628.10 5021728.10 5021828.10 2.3 5 12 5021528.12 5021628.12 5021728.12 5021828.12 2.9 9 15 5021528.15 5021628.15 5021728.15 5021828.15 3.3 17 16 5021528.16 5021628.16 5021728.16 5021828.16 3.4 20 20 5021528.20 5021628.20 5021728.20 5021828.20 3.9 40 22.4 5021528.22.4 5021628.22.4 5021728.22.4 5021828.22.4 4.5 52 Power loss limit of fuse base has to be considered 38 10.3 5021528 50.6mm 38 10.3 16.4 0.8 Loss 38 Total I 2 t I 2 t* 3.5 @1000V DC [A 2 s] 10.3 0.8 38 10.3 3.8 38.8 0.8 5.1 1.2 6.0 58.8 5021628 6.4 50.6 58.8 4.0 6.0 10.4 6.4 5021828 Article No. 1-Pole 5106305.1DC 5106305.1LDC 2-Pole 5106305.2DC 5106305.2LDC Article Number Fuse Clips 10mm 5806316 PCB 5806319 PCB 5806317 Screw Mounting 5021728 5106305 DC Series for 10x38mm 1000V DC Fuse Links E341490 Accessories Page 514-515 10x38mm DIN Rail Mounting Rated voltage; IEC/UL 1000V DC / 690V AC Rated current; 30A UL, 32A IEC Power acceptance; 4W Utilization category; AC - 21B 690V AC, DC - 20B 1000V BC Rated insulating voltage; > 6kV Contacts; copper-silver plated Conductor; 0.75mm 2-16mm 2 solid wire or stranded wire Maximum torque; 2.5N m Degree of protection; IP-20 * ( cable size < 6mm 2 contact SIBA) Construction, body & handle; Thermoplastic Polyester Flammability "UL 94"; V0 Rating of indicator; 350V DC - 1000V DC Storage & Operating temperature range; -50C to +85C ** * Operating temperaure depends upon connections and mounting parts ** Avoid handling of lever during installation or maitenance below -20C Important: DO NOT OPEN UNDER LOAD! Article Number Page 504
URDC-PV URPV Rated Voltage Rated Breaking Test Class [Un] Capacity Voltage gpv UL 2579 E341342 1000V DC 30kA (L/R=1ms) 1000V DC (UL) IEC 60 269-2 Size 10x38mm Coefficients for Heavy Duty Applications a A2 B1 B2 Cf3 130 0.8 1.25 0.5 0.8 Time-Current Characteristics Virtual Pre-arcing time - [s] R.M.S. Prospective Current [A] URPV Rated Voltage Rated Breaking Test Class [Un] Capacity Voltage gpv UL 2579 E341342 1000V DC 30kA (L/R=1-3ms) 1000V DC (UL) IEC 60 269-6 1000V DC (IEC) Size 14x51mm New Contact SIBA URPV Rated Voltage Rated Breaking Test Class [Un] Capacity Voltage gpv UL 2579 E341342 1000V DC 30kA (L/R=1-3ms) 1000V DC (UL) IEC 60 269-6 1000V DC (IEC) Size 22x58mm New Contact SIBA 505
URDC-PV URPV E341342 Rated Voltage [Un] 1100V DC Rated Breaking Test Class Capacity Voltage gpv UL 2579 30kA (L/R=1ms) 1100V DC (UL) IEC 60 269-6 Size 14x65/85mm Rated Without indicator Current I n Without indicator 77.5mm Without indicator 10/14mm Without indicator w/offset Tabs Mounting Clip Mount @1100V DC [A] Article Number UL Article Number UL Article Number UL Article Number UL [W] [A 2 s] [A 2 s] 10 5023528.10 5023728.10 5023828.10 5023928.10 4.0 3 21 12 5023528.12 5023728.12 5023828.12 5023928.12 4.1 7.5 51 16 5023528.16 5023728.16 5023828.16 5023928.16 4.6 16 109 20 5023528.20 5023728.20 5023828.20 5023928.20 5.5 30 205 25 5023528.25 5023728.25 5023828.25 5023928.25 5.9 82 560 Weight [kg / 1] 0.78 Units per Package 1 1 1 1 IEC Part Numbers IEC - Contact SIBA for Data Sheets 5023526.(Amp) 5023726.(Amp) 5023826.(Amp) 5023926.(Amp) Power Loss Pre-arcing I 2 t Total I 2 t* 5023528 5023728 5023828 5023928 Article Number 5806316 5806319 5806317 Accessories Fuse Clips 10mm Page Article Number Fuse Clips 14mm PCB 6100101.2 Screw Mounting 514 PCB 5805806 PCB Screw Mounting 515 5123805 Fuse Base Page 515 507 506
URDC-PV URPV Rated Voltage Rated Breaking Test Class [Un] Capacity Voltage gpv UL 2579 E341342 1100V DC 30kA (L/R=1ms) 1100V DC (UL) IEC 60 269-6 Size 14x65/85mm Coefficients for Heavy Duty Applications a A2 B1 B2 Cf3 130 0.8 1.25 0.5 0.8 Time-Current Characteristics Virtual Pre-arcing time - [s] R.M.S. Prospective Current [A] DIN Rail Mounting Rated voltage; 1500V DC, 1000V AC Rated current; 32A Power acceptance; 6W Conductor; 0.7mm 2-25mm 2 (maximum) Insulating voltage(between fuse contacts & DIN rail); - Rated impulse current; - Construction, body & handle; - Degree of protection; - Maximum torque; 2.5N m Contacts; - Flammability - Operating temperature range; - Important: DO NOT OPEN UNDER LOAD! 5123805 For 5023828 Fuse 507
URDC-PV URPV E341342 Rated Voltage Rated Breaking Test Class [Un] Capacity Voltage gpv 1100V DC 30kA (L/R=1-3ms) 1100V DC (UL) UL 2579 IEC 60 269-6 Size NH1XL Rated Current I n Without indicator With Top Indicator and Fitting for Power Microswitch [A] Article Number UL Article Number UL [W] 50 2002828.50 2002829.50 17 63 2002828.63 2002829.63 20 80 2002828.80 2002829.80 23 100 2002828.100 2002829.100 27 125 2002828.125 2002829.125 32 150 2002828.150 2002829.150 34 160 2002828.160 2002829.160 36 175 2002828.175 2002829.175 37 200 2002828.200 2002829.200 43 Weight [kg / 1] 0.78 Units per Package 1 IEC Part Numbers ( Not UL) IEC - Contact SIBA for Data Sheets 2002921.(Amp) 2002920.(Amp) Fuse Base 2102801 Loss Pre-arcing I 2 t Total I 2 t* @1100V DC [A 2 s] [A 2 s] 270 900 600 2 000 1 100 4 000 1 900 6 500 3 600 12 000 6 700 22 000 7 600 25 000 9 600 31 500 14 300 47 000 Indicator 2002828 / 2002829 Fuse Size NH1XL 1 - Pole Fuse Base Article No. 2102828 Rated Voltage Rated Current Breaking Capacity Rated Power Acceptance Weight Units per [V DC ] [A] [ka] [W] [kg/1] Package 1100 200 30 32 0.84 1 External Wall Article No. 2500501 Partition Wall Article No. Insulating Contact Covers Article No. 2100301.26 E341490 2102828 508
URDC-PV URPV E341342 Rated Voltage [Un] 1100V DC Rated Breaking Test Class Capacity Voltage gpv 30kA (L/R=1-3ms) 1100V DC (UL) UL 2579 IEC 60 269-2 Size NH1XL Coefficients for Heavy Duty Applications a A2 B1 B2 Cf3 130 0.8 1.25 0.5 0.8 Time-Current Characteristics Virtual Pre-arcing time - [s] R.M.S. Prospective Current [A] Accessories Article Number Grip Handle, Insertion/Removal Tool Page Article Number Microswitch - GL 2203101 Standard 2800202 Standard (Red Hammer) 511 2203102 w/leather Sleeve Page 509 URPV Rated Voltage Rated Breaking Test Class [Un] Capacity Voltage gpv UL 2579 E341342 1100V DC 30kA (L/R=1-3ms) 1100V DC (UL) IEC 60 269-2 New Product - Contact SIBA Size NH2XL, SQB1, 2 & 3 Rated SQB1 NH2XL SQB2 SQB0 SQB1 SQB2 SQB3 Power Pre-arcing Total Current US Short Knife Blade US Short M8 M8 M10 M12 Loss I 2 t I 2 t* I n Article No Article No Article No Article No Article No Article No Article No @1100V DC [A] 2003328 2002929 2002929 2001828 2001928 2002028 2002128 [W] [A 2 s] [A 2 s] to 250A to 250A to 450A to 160A to 250A to 450A to 500A 509
URDC-PV URPV E341342 Rated Voltage Rated Breaking Test Class [Un] Capacity Voltage gpv 1100V DC 30kA (L/R=1-3ms) 1100V DC (UL) UL 2579 IEC 60 269-6 Size NH3L & SQB2 Rated Current Without indicator With Top Indicator and Fitting for Without indicator With Top Indicator and Fitting for Power Loss Pre-arcing I n Microswitch Microswitch @1100V DC [A] Article Number UL Article Number UL Article Number UL Article Number UL [W] [A 2 s] [A 2 s] NH3L SQB2 NH3L SQB2 200 2003128.200 2003129.200 2003428.200 2003429.200 42 39 13 000 63 000 250 2003128.250 2003129.250 2003428.250 2003429.250 48 42 26 500 130 000 315 2003128.315 2003129.315 2003428.315 2003429.315 65 59 38 000 185 000 350 2003128.350 2003129.350 2003428.350 2003429.350 64 62 57 000 280 000 400 2003128.400 2003129400 2003428.400 2003429.400 71 77 80 000 390 000 450 2003428.450 2003429.450-87 92 500 450 000 500 Contact SIBA Weight [kg / 1] 0.78 Units per Package 1 IEC Part Numbers ( Not UL) IEC - Contact SIBA for Data Sheets 2003121.(Amp) 2003120.(Amp) Fuse Base 2103101 I 2 t Total Dimensions in / mm I 2 t* 2003128 / 2003129 Indicator 2003428 / 2003429 A B C D E1 E2 F L 5.08 / 129 1.02 / 26 0.55 / 14 2.36 / 60 7.48 / 190 6.06 / 154 0.24 / 6 8.46 / 215 Fuse Fuse Base Rated Rated Breaking Rated Power Weight Units External Wall Partition Wall Insulating Size Voltage Current Capacity Acceptance per Contact Covers NH3L Article No. [V DC ] [A] [ka] [W] [kg/1] Package Article No. Article No. Article No. 1 - Pole 2103128 1100 450 30 60 1.16 1 2500501 2100501.26 Fuse Bases for SQB Series - 1500V DC (UL 4248-18 - Pending) E341490 2103128 PV2 Fuse Base 3 (200A -450A, 600kcmil -4/0CU9Al) 510
URDC-PV URPV E341342 Rated Voltage [Un] 1100V DC Rated Breaking Test Class Capacity Voltage gpv 30kA (L/R=1-3ms) 1100V DC (UL) UL 2579 IEC 60 269-6 Size NH3L & SQB2 Coefficients for Heavy Duty Applications a A2 B1 B2 Cf3 130 0.8 1.25 0.5 0.8 Time-Current Characteristics Virtual Pre-arcing time - [s] R.M.S. Prospective Current [A] Article Number 2203101 2203102 Accessories Grip Handle, Insertion/Removal Tool Page Article Number Microswitch - GL Page Standard 2800202 Standard (Red Hammer) 514 516 w/leather Sleeve 511
URDC-PV URPV Rated Voltage Rated Breaking Test Class [Un] Capacity Voltage gpv UL 2579 Pending 1500V DC 30kA (L/R=3ms) 1500V DC (UL) IEC 60 269-6 New Product - Contact SIBA Size NH1&2XL, SQB0, 1, 2, & 3 Rated SQB3 SQB1 NH1XL NH2XL NH3L SQB0 SQB2 SQB3 Current US Short US Short Knife Blade Knife Blade Knife Blade US Short US Short US Short Article No Article No Article No Article No Article No Article No Article No Article No I n [A] 2004728 2004528 2004129 2004229 2004329 2004428 2004628 2003628 to 355A to 160A to 200A to 250A to 250A to 160A to 250A to 500A Contact SIBA for Data Sheets L- Series SQB 0/1/2/3 Fuse Bases for SQB Series - 1500V DC (UL 4248-18 - Pending) SQB - Series E341490 Accessories PV1 Fuse Base (35-200A, 3/0-10 CU9Al) PV2 Fuse Base (200A -450A, 600kcmil -4/0CU9Al) PV3 Fuse Base (200A -450A, 2x250kcmil -6CU9Al) PV4 Fuse Base (35A -450A, bus bar - 12mm stud) Grip Handle, Insertion/Removal Tool Page Article Number Standard 2800202 516 w/leather Sleeve Microswitch - GL Standard (Red Hammer) Page 514 512
URDC-PV URPV Rated Voltage Rated Breaking Test Class [Un] Capacity Voltage gpv UL 2579 Pending 1500V DC 30kA (L/R=3ms) 1500V DC (UL) IEC 60 269-6 Rated Current 14mmx65m I n Article No [A] 5024028 to 30A Contact SIBA for Data Sheets URPV E341490 Size NH00 - DIN80 Fuse Size NH00 DIN80 1 - Pole Fuse Base Rated Accessories Fuse Bases Rated Breaking Rated Power Weight Units External Wall Partition Wall Insulating Voltage Current Capacity Acceptance per Contact Covers Article No. [V DC ] [A] [ka] [W] [kg/1] Package Article No. Article No. Article No. 2118928 0.25 5 Included 600 160 30 34 2119028 0.26 3 N/A Dimensions [in / mm] 2119028 2118928 4.96 / 126 A 4.96 / 126 B 1.57 / 40 1.57 / 40 B1 1.34 / 34 B2 0.50 / 13 C 0.50 / 13 0.75 / 19 D 0.75 / 19 3.15 / 80 E 3.15 / 80 0.12 / 3 F 0.12 / 3 1.81 / 46 G 1.81 / 46 G1 G2 2.91 / 74 H 4.40 / 112 0.26 / 6.5 I 0.26 / 6.5 0.60 / 15.5 J 0.60 / 15.5 0.63 / 16 K 0.63 / 16 Lmax 5.75 / 146 5.75 / 146 L1 6.50 / 165 L2 M8 M M8 0.98 / 25 N 0.98 / 25 Max M8 nut torque 12N m 106lb in 21 190 28 Max base mounting torque 4N m 35lb in 21 189 28 513
URDC-PV URPV Accessories Article Number 2800201 2800202 * Accessories Microswitches GL Microswitch Standard Level Insulating Change Interrupt Rating Voltage Over AC DC [V] Circuits [V] [A] [V] [A] 5(resistive) 33 3(resistive) 1 250 3(inductive) 26 3(inductive L/R =10ms) 2800203 2800204 Weight [kg / 1] 0.02 Units per Package 10 1 5V AC 5V DC Interrupt Rating Minimum 30V AC 1mA(resistive) 30V DC Maximum 0.3A 2800201 2800203 2800202 2800204 Fuse Clips for 10mm Diameter Contacts 5806316 Dimensions [ in / mm] 5806316 5806319 0.43 / 11.0 A 0.43 / 11.0 0.47 / 12.0 B 0.47 / 12.0 0.71 / 18.0 C 0.71 / 18.0 0.14 / 3.6 D 0.14 / 3.6 0.08 / 2.0 E E 1 0.08 / 2.0 E 2 0.47 / 12.0 0.03 / 0.65 F 6.85 / 174 0.43 / 11.0 G 0.43 / 11.0 0.18 / 4.45 H 0.18 / 4.45 0.06 / 1.5 I 0.06 / 1.5 0.22 / 5.5 J 0.22 / 5.5 0.45 / 11.5 L 0.45 / 11.5 5806319 514
URDC-PV URPV Accessories Fuse Clips Fuse Clips for 10mm Diameter Contacts Dimensions [ in / mm] 5806317 6301701 6101701.3 0.43 / 11.0 A 0.39 / 10.0 0.83 / 21.0 0.47 / 12.0 B 0.35 / 9.0 0.24 / 6.0 0.71 / 18.0 C 0.08 / 2.0 0.08 / 2.0 6301701 0.17 / 4.2 D 0.17 / 4.2 D 1 / M5 D 2 / M4 E 0.61 / 15.5 0.03 / 0.65 F 0.43 / 11.0 G 0.22 / 5.5 H 5806317 0.06 / 1.5 I 0.22 / 5.5 J 0.45 / 11.5 L 6101701.3 Fuse Clips for 14mm Diameter Contacts 6100101.2 5805806 Dimensions [ in / mm] 6100101.2 6301701 0.61 / 15.5 A 0.39 / 10.0 0.61 / 15.5 B 0.35 / 9.0 0.90 / 22.8 C 0.08 / 2.0 0.17 / 4.2 D 0.17 / 4.2 0.03 / 0.7 F 0.06 / 1.5 I 0.26 / 6.5 J 0.57 / 14.5 L Dimensions [ in / mm] 58 058 06 0.63 / 16.0 A 0.47 / 12.0 B 0.61 / 15.5 C 0.14 / 3.5 E 1 0.20 / 5.0 E 2 0.03 / 0.70 F 0.42 / 10.7 G 0.17 / 4.2 H 0.04 / 1.0 I 0.12 / 3.0 K 0.33 / 8.5 L 6301701 515
URDC-PV URPV Accessories - Insertion / Removal Tool European NH Knife Blade Fuse System to 1600V AC NH1 - NH3 (a 5 =120mm - 124mm) 2203101 (Standard) Do Not Operate Under Load! Do Not Operate Under Load! European NH Knife Blade Fuse System to 690V AC NH00 - NH3 2200102 (Standard) 2200105 (with Leather Sleeve) 2203102 (with Leather Sleeve) NH4 & 4a 2212001 (with Leather Sleeve) Do Not Operate Under Load! 516