Air ylinder Series S,,,,,, Series Variations Series Action asic Standard variations Page J JP J Standard Series S Series S Double acting Single rod Series S Double rod Series SW 4 4 M G M M A S S Series SW Low Friction Series SQ Double acting Single rod Series SQ 9 For the aluminum tubing of bore sizes, and, a new Series S model is now available with reduced weight and self weight deflection. Please consider using the S series. D- -X 9 -X
ombinations of Standard Products and Made Series S to Order Specifications Series S : Standard : Made to Order specifications : Special product (ontact SM for details.) : Not available Symbol Standard DS J S-K - XA X5 X6 X7 X9 X6 X3 X4 X5 X6 X7 Specification Standard uilt-in magnet opper and Fluorine-free hange of rod end shape Oversized rod cylinder Heat-resistant cylinder ( to ) old-resistant cylinder Low-speed cylinder (5 to mm/s) Large-bore air-hydro cylinder Special port location With heavy duty scraper Heat-resistant cylinder ( to ) Stainless steel Tie-rod, cushion valve, tie-rod nut and similar parts made of stainless steel Series Action/ Applicable bore size to to to to to to to to to S (Standard) Double acting Single rod to Note) to S (Standard) Double rod Double acting SQ (Low friction) Single rod to to J JP J M G M M A S S X X9 X X X X4 X5 X X6 Adjustable stroke cylinder/adjustable extension type Adjustable stroke cylinder/adjustable retraction type Dual stroke cylinder/double rod type Dual stroke cylinder/single rod type Tandem cylinder hange of trunnion bracket mounting position hange of tie-rod length Fluororubber seal levis pins with flat washer to Note) X7 Double clevis pins made of stainless steel (Stainless steel 4) to X X X X X X6 X6 Rod side trunnion mounted on the rod cover front With coil scraper Special trunnion axis levis hole with bushing Knuckle fixed with nuts Hard chrome plated stainless steel rod With rod end bracket Note) Applicable I.D.: to, and are available upon request for special order. D- 4 4 -X -X
Symbol Nil F,, to, L F G D T S L Mounting style asic style Foot style Rod side flange style Head side flange style Single clevis style Double clevis style enter trunnion style Tubing material Aluminum tube Steel tube Steel tube Tubing material Nil N H Stroke range or less or less or more or more All stroke Note) or less or less Refer to page for the maximum strokes. Note) The tubing material of items with a bore size of and corresponding to the lass Pressure Vessel Act is aluminum tubing. Air ylinder: Standard,, Series S, :,,,,,, :,, How to Order, mm mm mm mm mm mm mm For the aluminum tubing of bore sizes, and, a new Series S model is now available with reduced weight and self weight deflection. Please consider using the S series. Suffix for cylinder Rod boot J K N R H Nylon tarpaulin Heat resistant tarpaulin Without cushion With cushion in rod side With cushion in head side With cushion in both sides Nil ( type has no cushion.) If specifying more than one symbol, indicate them in alphabetically type has no cushion. No symbol indicates no cushion. ushion mm mm mm Made to Order (Refer to page for details.) ylinder stroke (Refer to Maximum Stroke on page.) Port thread type Nil Rc TN NPT TF G Mounting racket Part No. Foot style Flange style Single clevis style Double clevis style S-L S-F S- S-D S-L4 S-F4 S-4 S-D4 S-L6 S-F6 S-6 S-D6 S-L S-F S- S-D S-L S-F S- S-D S-L5 S-F5 S-5 S-D5 S-L S-F S- S-D Order two foot brackets per cylinder. When ordering the double clevis, the clevis pin and the cotter pin ( pcs.) are attached. For How to Order with auto switch, refer to page 4. 4
Air ylinder: Standard,, Series S JIS Symbol Double acting Made to Order Specifications (For details, refer to pages 373 to 4.) Symbol Specifications XA hange of rod end shape X5 Oversized rod cylinder X6 Heat-resistant cylinder ( to ) X3 Special port location X4 With heavy duty scraper X5 Heat resistant cylinder ( ) X6 Piston rod and rod end nut made of stainless steel X Adjustable stroke cylinder/adjustable extension type X9 Adjustable stroke cylinder/adjustable retraction type X Dual stroke cylinder/double rod type X Dual stroke cylinder/single rod type X4 hange of trunnion bracket mounting position X5 hange of tie-rod length X Fluororubber seal X6 levis pins with flat washer Double clevis pin and double knuckle pin X7 made of stainless steel X Rod side trunnion X With coil scraper X6 Hard chrome plated stainless steel rod X6 With rod end bracket Specifications Fluid Proof pressure Maximum operating pressure Minimum operating pressure Piston speed ushion Ambient and fluid temperature Stroke length tolerance, to Air.5 MPa to mm/s Interchangeable,, Turbine oil Note).57 MPa.97 MPa.6 MPa.5 to mm/s None or less st : +., 5 to, st : +.4,, to, st : +. to st : +., to st : +.6 asic style, Foot style, Rod side flange style, Mounting Head side flange style, Single clevis style, Double clevis style, enter trunnion style Note) Item corresponding to lass Pressure Vessel Act is.46 MPa. Maximum Stroke Tubing material or less or less or less or less or less or less or less Note) or less or less or less or less or less or less or less or less or less or less Note) The tubing material of items with a bore size of and corresponding to the lass Pressure Vessel Act is aluminum tubing. Accessory Standard equipment Option Mounting bracket Mounting levis pin, otter pin Rod end nut Single knuckle joint Double knuckle joint (levis pin, otter pin) Rod boot asic style Aluminum tube asic style, Head side flange style Single clevis style, Double clevis style enter trunnion style, Foot style Rod side flange style Foot style Rod side flange style Head side flange style Single clevis style Steel tube asic style Head side flange style Single clevis style Double clevis style enter trunnion style Double clevis style enter trunnion style In the case of using the rod end nut together with the single knuckle joint or double knuckle joint, refer to page 49. Foot style Rod side flange style Note) Note) J JP J M G M M A S S lass Pressure Vessel In the case of exceeding the following strokes, the cylinder is subject to lass Pressure Vessel Act. ylinder stroke,9 9 3 4 Rod oot Material Symbol Material J Nylon tarpaulin K Heat resistant tarpaulin Maximum ambient temperature Maximum ambient temperature for the rod boot itself. D- -X -X
Series S Principal Parts Material and Surface Treatment over Tube Sliding part seal Piston rod Piston,,,,, 4.5 (3.73) 6. (5.).53 (6.4).53 (6.4).9 (6.).3 (.6). (.6).77 Material plate Aluminum alloy arbon steel tube arbon steel tube Note) NR NR NR arbon steel ast iron Aluminum alloy casted (Iron tube: ast iron) Aluminum alloy casted (Iron tube: ast iron). (6.57). (9.9). (.57). (.57).7 (.6) 3. (.6) 3.7 (.).96 Note lack painted Hard anodized Inside: Hard chrome plated Inside: Hard chrome plated Note) JIS O-ring Hard chrome plated Note) For items corresponding to the lass Pressure Vessel Act, the material is Aluminum alloy and the note should state Hard anodized. Mass/Aluminum Tube: (, ) asic mass asic style Foot style Rod side flange style Head side flange style Single clevis style Double clevis style (levis pin, otter pin) Trunnion style Additional mass per each mm of stroke hromated (In the case of aluminum alloy casted) hromated (In the case of aluminum alloy casted) 4.77 (3.3) 7.57 (5.3) 3.6 (9.4) 3.6 (9.4).6 (.5) 3. (9.37) 3. (.). (kg) Precautions e sure to read before handling. Refer to front matters 54 and 55 for Safety Instructions and pages 3 to for Actuator and Auto Switch Precautions. Warning Do not use the cylinder as a shock absorber. Using the cylinder as a shock absorber may cause damage. aution Do not open the cushion valve excessively. If the cushion valve is rotated excessively in the opening direction (counterclockwise), it could be damaged. e aware that the valve could slip out, or the threads becomes too short. Regarding the installation of a knuckle joint Please contact SM if a knuckle joint must be installed on the piston rod by using the rod end nut. Do not place tape or other objects onto the painted surface of the unit. The paint of the S cylinder is dried naturally, so it may peel off if tape or another object is placed onto it. Single knuckle.9.6. Accessory bracket Double knuckle (Knuckie pin, otter pin).37.. Rod end nut.6.6.3 ( ): Denotes the non-lube and air-hydro type. alculation example: SL- asic mass 7.57 (Foot style, ) Additional mass./ stroke ylinder stroke stroke 7.57 +. x / =.5 kg Mass/Steel Tube Standard mass Additional mass per each mm of stroke Accessory bracket 44 asic style Foot style Rod side flange style Head side flange style Single clevis style Double clevis (levis pin, otter pin) Trunnion style Single knuckle Double knuckle (Knuckle pin, otter pin) Rod end nut 5. 6.3...7.73 9.33.66.9.37.6.3. 3.3 3.3.67 3.4 4. 3..6..6 5.4.4 3. 3..73 3.5 3.64 3.5...3 34.6 3..99.99 4.55 44.3 44.7 4.95 3.7 4.74.3 4.66.54 54.57 54.57 5. 54..65 5.75. 4..5 79.7 9..6.6.. 7.6 9. 5.3 9..6 (kg).94 33. 46.4 46.4 49. 54.96.37.5...
Air ylinder: Standard,, Series S onstruction J JP J M G M In the case of aluminum tube M A S S In the case of aluminum tube omponent Parts No. Rod cover Head cover Material plate plate Note lack painted lack painted 3 ylinder to Aluminum alloy Hard anodized tube to arbon steel tube Inside: Hard chrome plated 4 5 6 7 9 Piston Piston rod Retaining plate ushing Valve guide Tie-rod Tie-rod nut Spring washer ast iron arbon steel ast iron Lead-bronze casted rass arbon steel Steel wire Hard chrome plated lack painted hromated lack zinc chromated lack zinc chromated Retaining plate bolt hromium molybdenum steel lack zinc chromated 3 4 5 6 9 3 Spring washer ushion ring A ushion ring ushion valve Spacer A Spacer Air releasing Air releasing A heck ball Tie-rod reinforcement ring Wear ring Steel wire hromium molybdenum steel hrome bearing steel Resin lack zinc chromated Zinc chromated Zinc chromated Electroless nickel plated Zinc chromated Zinc chromated Zinc chromated lack painted In the case of long strokes Aluminum tubing material of non-lube and air-hydro type is an aluminum alloy casted. Seal List No. 3 Wiper ring 4 ushion seal 5 Rod seal 6 Piston seal 7 Valve seal Tube gasket 9 Piston gasket Retaining plate gasket 3 Guide gasket 5 6 Material NR NR Material NR Note Seals except @5 and @6 are the same as for the lube-type. Rod seal Piston seal Seals except @5 and @6 are the same as for the lube-type. (Except cushion seal) No. 5 Rod seal 6 Piston seal Note Replacement Parts (Seal kit) For replacement parts no. (seal kit) for air cylinder standard type Series S, refer to page 46. Seal kits does not include cushion seal, piston seal and guide gasket because those are not replaceable parts. D- -X -X
Series S Standard/Replacement Parts/Seal Kit When ordering the replacement parts (seal kits) for standard style Series S air cylinders, indicate the order number listed in the table on the right. Each set of replacement parts contains the following: Wiper ring, rod seal, piston seal, valve seal, tube gasket, and push plate gasket (for cylinder). Standard () Kit no. S-A-PS S-A-PS S-A-PS S-A-PS S-A-PS S-A-PS S-A-PS omponent part numbers: @3, @5, @6, @7, @, # Seal kit includes a grease pack ( to : g, and : g, and : g). Order with the following part number when only the grease pack is needed. Grease pack part no.: GR-S- ( g), GR-S- ( g) Standard () Kit no. SNA-PS SNA-PS SNA-PS SNA-PS SNA-PS SNA-PS SNA-PS omponent part numbers: @3, @5, @6, @7, @, # Seal kit includes a grease pack ( to : g, and : g, and : g). Order with the following part number when only the grease pack is needed. Grease pack part no.: GR-S- ( g), GR-S- ( g) Kit no. SHA-PS SHA-PS SHA-PS omponent part numbers: @3, @5, @6, @7, @, # 46
With auto switch L F G D T Mounting style asic style Foot style Rod side flange style Head side flange style Single clevis style Double clevis style enter trunnion style With auto switch (uilt-in magnet) How to Order DS L Nil N H, mm mm mm mm mm uilt-in Magnet ylinder Model If a built-in magnet cylinder without auto switch is required, there is no need to enter the symbol for auto switch. Example) DS- Air ylinder Series DS,,,, mm mm mm Port thread type Nil TN TF Rc NPT G ylinder stroke (Refer to Maximum Stroke on page.) M9W Nil 3 S n Auto switch Nil Without auto switch Refer to the table below for the applicable auto switch model. Suffix for cylinder Rod boot ushion J K N R H Nil Number of auto switches pcs. 3 pcs. pc. n pcs. Made to Order (Refer to page for details.) Nylon tarpaulin Heat resistant tarpaulin Without cushion With cushon in rod side With cushon in head side With cushion in both sides ( type has no cushion.) If specifying more than one symbol, indicate them alphabetically. type has no cushion. No symbol indicates no cushion. J JP J M G M M A S S Applicable Auto Switch/Refer to pages to 37 for further information on auto switches. Special function Electrical entry Reed switch Solid state switch Diagnostic indication (-color indication) Water resistant (-color indication) With diagnostic output (-color indication) Grommet Terminal conduit Grommet Grommet Indicator light Yes Yes Yes No Yes No Wiring (Output) 3-wire (NPN) 3-wire (PNP) -wire 3-wire (NPN) -wire 3-wire (NPN) 3-wire (PNP) -wire 3-wire (NPN) 3-wire (PNP) -wire 4-wire (NPN) 3-wire (NPN equivalent) 4V 4V Load voltage Auto switch model Lead wire length (m) D 5V,V V 5V,V V 5V,V V 5V,V V 5V,V 5V V 5V,V A V, V V V or less V, V V or less Tie-rod mounting M9N M9P M9 J5 M9NW M9PW M9W M9NA M9PA M9A FF A96 A93 A A54 A64 AW and mounting G K A33 A34 A44.5 (Nil) (M) 3 (L) 5 (Z) Pre-wired connector Applicable load I circuit I circuit I circuit I circuit I circuit I circuit I circuit -wire 4V Terminal V PL conduit V, V Relay, DIN terminal PL Diagnostic indication (-color indication) Grommet Water resistant type auto switches can be mounted on the above models, but in such case SM cannot guarantee water resistance. onsult with SM regarding water resistant types with the above model numbers. Lead wire length symbols:.5 m Nil (Example) M9NW Solid state auto switches marked with are produced upon receipt of order. m M (Example) M9NWM 3 m L (Example) M9NWL 5 m Z (Example) M9NWZ Since there are other applicable auto switches than listed above, refer to page 4 for details. For details about auto switches with pre-wired connector, refer to pages 3 and. D-A9/M9/M9W/M9AL auto switches are shipped together (not assembled). (Only auto switch mounting brackets are assembled before shipped.) Relay, PL Relay, PL 4 D- -X -X
Series DS Specifications Fluid Proof pressure Maximum operating pressure Minimum operating pressure Piston speed ushion Ambient and fluid temperature Stroke length tolerance Mounting, Air,,,.57 MPa. MPa.97 MPa.7 MPa.5 MPa to mm/s Interchangeable Turbine oil,,.57 MPa.97 MPa.6 MPa.5 to mm/s None or less st : +., 5 to, st : +.4,, to, st : +. asic style, Foot style, Rod side flange style, Head side flange style, Single clevis style, Double clevis style, enter trunnion style JIS Symbol Double acting Made to Order Specifications (For details, refer to pages 373 to 4.) Maximum Stroke, Note Maximum stroke asic style, Head side flange style, Single clevis style, Double clevis style, enter trunnion style or less or less or less 9 or less : ylinders of the stroke range of 9 to are special products. Foot style, Rod side flange style or less or less or less 9 or less : ylinders of the stroke range of 9 to are special products. Symbol Specifications XA hange of rod end shape X5 Oversized rod cylinder X3 Special port location X4 With heavy duty scraper X6 Piston rod and rod end nut made of stainless steel X Adjustable stroke cylinder/adjustable extension type X9 Adjustable stroke cylinder/adjustable retraction type X Dual stroke cylinder/double rod type X Dual stroke cylinder/single rod type X4 hange of trunnio bracket mounting position X5 hange of tie-rod length X Fluororubber seal X6 levis pins with flat washer X7 Double clevis pin and double knuckle pin made of stainless steel X Rod side trunnion X With coil scraper X6 Hard chrome plated stainless steel rod X6 With rod end bracket Refer to pages 4 to 4 for auto switch specifications. Minimum auto switch mounting stroke Proper auto switch mounting position (detection at stroke end) and mounting height Operating range Switch mounting bracket: Part no.
Air ylinder Series DS Principal Parts Material and Surface Treatment over Tube Sliding part seal Mass,,, type type type Piston rod Piston arbon steel Aluminum alloy casted Hard chrome plated hromated Foot style, Rod side flange style: In the case of bore size of and, the stoke range is to. In the case of, piston seals of the stroke range to are NLP. In the case of bore size and, piston seals are NLP. asic style Foot style Rod side flange style asic Head side flange style mass Single clevis style Double clevis (levis pin, otter pin) Trunnion style Additional mass per each stroke Accessory bracket Single knuckle Double knuckle (Knuckle pin, otter pin) Rod end nut 3.79 5.4 6. 6. 6.6.3.9.77.9.37.6 Material plate Aluminum alloy NR NR NR 6.64 9.6.64.64.93.6.37.96.6..6 3. 5.9 9. 9.. 9..5....3 Note lack painted Hard anodized JIS O-ring 7.55 3.75 37.3 37.3.94 37.6 3.7.5 3.7 4.74.3 (kg)..99.. 46..4. 3.4. 4..5 J JP J M G M M A S S Mounting racket Part No. Foot style Flange style Single clevis style Double clevis style S-L S-F S- S-D S-L4 S-F4 S-4 S-D4 S-L6 S-F6 S-6 S-D6 S-L S-F S- S-D S-L S-F S- S-D Order two foot brackets per cylinder. When ordering the double clevis, the clevis pin and the cotter pin ( pcs.) are attached. D- 49 -X -X
Series DS onstruction () Foot style: Rod side flange style In the case of, to st In the case of to st () In the case of, (), (): type is used. :,, only omponent Parts No. 3 4 5 6 7 9 3 4 5 6 9 3 4 5 6 7 Rod cover Head cover ylinder tube Piston Piston rod Retaining plate ushing Valve guide Tie-rod Tie-rod nut Spring washer Retaining plate bolt Spring washer ushion ring A ushion ring ushion valve Spacer A Spacer Air releasing Air releasing A heck ball Auto switch Set screw Switch mounting bracket Switch mounting screw Magnet Wear ring Material plate plate Aluminum alloy Aluminum alloy casted arbon steel ast iron Lead-bronze casted rass arbon steel Steel wire hromium molybdenum steel Steel wire hromium molybdenum steel hrome bearing steel hromium molybdenum steel Aluminum alloy opper wire Resin Note lack painted lack painted Hard anodized hromated Hard chrome plated lack painted hromated lack zinc chromated lack zinc chromated lack zinc chromated lack zinc chromated Zinc chromated Zinc chromated Electroless nickel plated Zinc chromated Zinc chromated Zinc chromated Zinc chromated Nickel plated Seal List No. Rod seal Piston seal Material NR NR Material NR Note () (For lube-type, refer to page 4.) 9 3 3 33 34 Wiper ring ushion seal Rod seal Piston seal Valve seal Tube gasket Piston gasket Retaining plate gasket Guide gasket Seals except # and # are the same as lube type. 3 Rod seal Piston seal Seals except # and # are the same as lube type. No. 3 Replacement Parts (Seal kit) Note For replacement part no. (seal kits) of cylinder with auto switch Series DS, refer to page 4. Seal kits does not include cushion seal, piston seal and guide gasket because those are not replaceable parts.
Air ylinder Series S With Auto Switch/Replacement Parts/Seal Kit When ordering the replacement parts (seal kits) for Series DS cylinder with auto switches, indicate the order number listed in the table on the right. Each set of replacement parts contains the following: wiper ring, rod seal, piston seal, valve seal, tube gasket, and push plate gasket (for cylinder). () Kit no. S-A-PS S-A-PS S-A-PS DS-A-PS DS-A-PS Kit no. SNA-PS SNA-PS SNA-PS SNA-PS SNA-PS Kit no. DSLA-PS DSLA-PS DSLA-PS omponent part numbers: @, #, #, #, #3, #5 Seal kit includes a grease pack ( to : g, and : g). Order with the following part number when only the grease pack is needed. Grease pack part no.: GR-S- ( g), GR-S- ( g) omponent part numbers: @, #, #, #, #3, #5 Seal kit includes a grease pack ( to : g, and : g). Order with the following part number when only the grease pack is needed. Grease pack part no.: GR-S- ( g), GR-S- ( g) () omponent part numbers: @, #, #, #, #3, #5 Foot style, Rod side flange style:, to stroke, to stroke Seal kit includes a grease pack ( to : g, and : g). Order with the following part number when only the grease pack is needed. Grease pack part no.: GR-S- ( g), GR-S- ( g) J JP J M G M M A S S Kit no. SHA-PS SHA-PS SHA-PS omponent part numbers: @, #, #, #, #3, #5 D- 4 -X -X
Series S asic Style: S type (S), type (SN), type (SH) x P ZZ + l + Stroke ZZ + Stroke With auto switch: DS ~= ~ = d ~ = d x P ZZ + l + Stroke ZZ + Stroke Stroke range A to to to to to to 7 to Without rod boot H 5 ZZ.5 34.5 37.5 d 9 96 AL 53 67 76 e 75 75 75 5 5 6 4 6 77 3 The minimum stroke with rod boot is mm or more. 44 6 5 7 D 7 E f h l 55 55 33 33 4 53 53 6. stroke. stroke. stroke. stroke. stroke. stroke. stroke EA 7 74 6 96 ZZ 5 5 77.5 99 99.5 37.5 F FA 4 4 4 G 6 6.5.5.5 3 3 J M4 x.5 M4 x.5 M6 x.5 M x.5 M x.5 M4 x.5 M x.5 K 5 5 5 KA 3 3 4 46 65 Stroke range Up to Up to Up to Up to Up to 9 M 7 7.5 4.5 5.5 S 6 MM M x.5 M x.5 M x.5 M x.5 M x.5 M x M64 x With Auto Switch: to Only N 49 49 Without rod boot ZZ.5 5 P S 6 4 46 ZZ 5 5 77.5 3 Dimensions except mentioned above are the same as standard type. For the auto switch mounting position and its mounting height, refer to page 4. Refer to Minimum Stroke for Auto Switch Mounting on page 444. 4
Air y linder Series S Foot Style: SL type (SL), type (SLN), type (SLH) x P d 4 x LD J JP ZZ + l + Stroke L ZZ + Stroke J Long stroke x P M G M M d 4 x LD A ZZ + l + Stroke L ZZ + Stroke S S With auto switch: DSL x P ~= d 4 x LD ~ = ~ = ZZ + l + Stroke L ZZ + Stroke Stroke range * Long stroke range Up to to Up to to Up to to Up to to Up to to Up to to Up to to A 7 AL 53 67 76 6 4 6 77 3 44 6 5 7 Without rod boot RY S X Y H ZZ d e 64 73 75 4 3 75 4 57 3 6 4 46 5 5 3 3 4 9 96 75 5 5 The minimum stroke with rod boot is mm or more. D 7 E EA 7 74 6 96 F FA 4 4 4 f h l ZZ 33. stroke 96 33. stroke 6 4. stroke 3 53. stroke 4 53. stroke 4 55 6. stroke 7 55. stroke 466 G 6 6.5.5.5 3 3 J K KA LD LH LS LT LX LY MM N P M4 x.5 M4 x.5 M6 x.5 M x.5 M x.5 M4 x.5 M x.5 5 5 5 3 3 4 46 65 9 9 9 4 4 9 33 5 6 3 6 3 3 9 9 5 3 57.5.5 97 7.5 5 M x.5 M x.5 M x.5 M x.5 M x.5 M x M64 x 49 49 55 55 With Auto Switch: to Only Stroke range Without rod boot S LS ZZ ZZ Up to 73 96 Up to 3 6 Up to 6 6 3 Up to 3 Up to 9 3 3 Dimensions except mentioned above are the same as standard type. For the auto switch mounting position and its mounting height, refer to page 4. Refer to Minimum Stroke for Auto Switch Mounting on page 444. RT D- -X -X
Series S Rod Side Flange Style: SF type (SF), type (SFN), type (SFH) x P 4 x FD d 4 x FD d 4 x FD d ZZ + l + Stroke ZZ + Stroke Long stroke x P ZZ + l + Stroke ZZ + Stroke With auto switch: DSF x P ~= ~ = ~ = ZZ + l + Stroke ZZ + Stroke Stroke Without rod boot range A AL D E EA F FA FD FT FX FY FZ G J K KA M S N P MM H ZZ d e f h l ZZ Up to 4 9 4 6 M4 x.5 5 3 M x.5 3 75 33 6 Up to 6 4 9 55 6 M4 x.5 5 M x.5 3 75 33 55. x Up to 53 44 4 9 75.5 M6 x.5 6 6 M x.5 5 75 4 Stroke 73 Up to 4 6 7 4 5 65 3.5 M x.5 4 3 M x.5 77 9 5 53 95 Up to 5 6 74 4 5 3.5 M x.5 46 3 M x.5 77 96 53 95 Up to 7 Up to 67 76 75 77 5 3 3 7 7 6 96 9 33 5 5 3 3 M4 x.5 5 M x.5 65 4 46 49 49 M x M64 x 3 5 9 5 55 55 6. x Stroke 34 Long Stroke With Auto Switch: to Only Long stroke Without rod boot Without rod boot M M RT RY Stroke range S range ZZ ZZ ZZ ZZ to 64 53 Up to 3 6 to 9 9 4 7 Up to 3 55 to to to 6 6 6 6 4 57 7 7 69 Up to Up to Up to 9 6 5 6 73 99 4 to 55 33 3 Dimensions except mentioned above are the same as standard type. to 55 3 7 37 For the auto switch mounting position and its mounting height, The minimum stroke with rod boot is mm or more. refer to page 4. Refer to Minimum Stroke for Auto Switch Mounting on page 444. 44
Air ylinder Series S Head Side Flange Style: SG type (SG), type (SGN), type (SGH) x P 4 x FD d J JP ZZ + l + Stroke ZZ + Stroke J M G x P ~= 4 x FD M M ~ = A d ~ = S ZZ + l + Stroke ZZ + Stroke S Stroke range * Up to Up to Up to Up to Up to Up to Up to A 7 AL 53 67 76 5 75 3 6 4 6 77 3 44 6 5 7 D 7 E EA 7 74 6 96 F FA 4 4 4 FD 9 9 9 4 4 9 33 FT 4 5 5 FX 65 5 FY 3 FZ 55 75 3 5 G 6 6.5.5.5 3 3 J M4 x.5 M4 x.5 M6 x.5 M x.5 M x.5 M4 x.5 M x.5 K 5 5 5 KA 3 3 4 46 65 MM M x.5 M x.5 M x.5 M x.5 M x.5 M x M64 x N P 49 49 Without rod boot S H ZZ d e f h l 75 33. stroke 75 33. stroke 6 4 46 5 46 7 7 33 9 96 75 5 5 55 55 4 53 53 6. stroke. stroke. stroke. stroke. stroke The minimum stroke with rod boot is mm or more. ZZ 5 67 9 9 3 6 With Auto Switch: to Only Stroke range S Up to Up to Up to 6 Up to Up to 9 Without rod boot ZZ 46 75 ZZ 5 67 93 Dimensions except mentioned above are the same as standard type. For the auto switch mounting position and its mounting height, refer to page 4. Refer to Minimum Stroke for Auto Switch Mounting on page 444. D- -X -X
Series S Single levis Style: S type (S), type (SN), type (SH) x P d Z + l + Stroke ZZ + l + Stroke Z + Stroke ZZ + Stroke With auto switch: DS x P ~= ~ = d ~ = Z + l + Stroke ZZ + l + Stroke Z + Stroke ZZ + Stroke Stroke range Up to Up to Up to Up to Up to Up to Up to A 7 AL 53 67 76 6 4 6 77 3 44 6 5 7 S 6 4 46 U Without rod boot H Z ZZ d 65 5 73 3 6 3 3 4 34 3 3 466 9 96 e 75 75 75 5 5 The minimum stroke with rod boot is mm or more. DH 5 3 +.4 +.4 +. +. +. +. +. T 3 5 37 X 3..3..3..3..3..3..3..3 D 7 E f h l Z ZZ 33. stroke 96 33. stroke 6 33 4. stroke 37 3 53. stroke 4 53. stroke 4 55 6. stroke 55. stroke 466 534 EA 7 74 6 96 F FA 4 4 4 G 6 6.5.5.5 3 3 J M4 x.5 M4 x.5 M6 x.5 M x.5 M x.5 M4 x.5 M x.5 K 5 5 5 KA 3 3 4 46 65 L 65 75 MM M x.5 M x.5 M x.5 M x.5 M x.5 M x M64 x N 49 49 With Auto Switch: to Only P RR 9 3 44 44 55 6 Stroke range Without rod boot S Z ZZ Z ZZ Up to Up to Up to Up to Up to 9 6 73 3 6 3 3 34 34 39 96 6 37 3 33 3 7 Dimensions except mentioned above are the same as standard type. For the auto switch mounting position and its mounting height, refer to page 4. Refer to Minimum Stroke for Auto Switch Mounting on page 444. 46
Air ylinder Series S Double levis Style: SD type (SD), type (SDN), type (SDH) x P D hole H Shaft d9 J d JP J Z + l + Stroke ZZ + l + Stroke With auto switch: DSD Z + Stroke ZZ + Stroke M G M x P D hole H Shaft d9 ~= M A ~ = S d ~ = S Z + l + Stroke ZZ + l + Stroke Z + Stroke ZZ + Stroke Note) levis pin and cotter pin are shipped together. Stroke range Up to Up to Up to Up to Up to Up to Up to A 7 AL 53 67 76 6 4 6 77 3 44 6 5 7 DH T X Z 5 3 +.4 +.4 +. +. +. +. +. 3 5 37 3 +.3 +. +.3 +. +.3 +. +.3 +. +.3 +. +.3 +. +.3 +. D E EA F FA G J K KA 64. 7....3..3. 6.3..3 7 7 74 6 96 4 4 4 6 6.5.5.5 3 3 M4 x.5 M4 x.5 M6 x.5 M x.5 M x.5 M4 x.5 M x.5 5 5 5 3 3 4 46 65 65 75 L MM M x.5 M x.5 M x.5 M x.5 M x.5 M x M64 x With Auto Switch: to Only Without rod boot Without rod boot S U Stroke range S H Z ZZ d e f h l Z ZZ Z ZZ Z ZZ 73 75 33. stroke 96 Up to 73 96 3 75 33. stroke 6 33 Up to 3 6 33 6 6 3 3 34 3 3 9 96 75 5 4 53 53. stroke. stroke. stroke 37 4 4 3 Up to Up to Up to 9 6 6 3 3 34 34 39 37 3 3 7 4 65 4 466 5 55 6. stroke Dimensions except mentioned above are the same as 46 5 55. stroke 466 534 standard type. For the auto switch mounting position and its mounting The minimum stroke with rod boot is mm or more. height, refer to page 4. Refer to Minimum Stroke for Auto Switch Mounting on page 444. N P 49 49 RR 9 3 44 44 55 6 D- -X -X
Series S enter Trunnion Style: ST type (ST), type (STN), type (STH) Z + l + / stroke Z + / stroke x P d h + l ZZ + l + Stroke ZZ + Stroke With auto switch: DST Z + l + / stroke Z + / stroke x P ~= ~ = d ~ = h + l ZZ + l + Stroke ZZ + Stroke Stroke range A AL D E EA F FA G J K KA M MM N P R S TDe TT TX 5 to 4 6 M4 x.5 5 3 9 M x.5. 3.9 to 6 4 6 M4 x.5 5 3 9 M x.5..5.9 55 to 53 44 4.5 M6 x.5 M x.5 3. 4.5 6.9 to 4 6 7.5 M x.5 4 6 M x.5 3. 4.9 to 6 74.5 M x.5 46 6 M x.5 3. 4.9 65. to 7 67 77 5 6 3 M4 x.5 5 M x 49.6 69 3. to 76 3 7 7 96 3 M x.5 65 M64 x 49 4 46 67.6 79 With Auto Switch: to Only Without rod boot Without rod boot TY TZ Stroke range S H Z ZZ d e f h l Z ZZ Z ZZ Z ZZ 64 34 7 75 33. stroke UP to 7 4 6 7 75 33. stroke UP to 7 4 9 75 4. stroke 94 69 UP to 6 94 69.5 7 9 5 53. stroke.5 UP to 9.5 76.5 94 57 5.5 7 96 53. stroke.5 UP to 9 95 3 99 4.5 33 5 55 6. stroke 46.5 3 Dimensions except mentioned above are the same as 3 534 5 7 55. stroke 37 standard type. For the auto switch mounting position and its mounting height, refer to page 4. Refer to Minimum Stroke for Auto Switch Mounting on page 444. The minimum stroke with rod boot is mm or more. (The minimum stroke with rod boot, but for bore size and is mm or more.)
Air ylinder Series S Accessory racket Dimensions I Single Knuckle Joint Knuckle Pin, levis Pin ND hole H Shaft d9 Part no. I- I-4 I-6 I- I- I-5 I- Applicable bore size A 9 9 A E L 54 54 67 67 75.5 4.5 46 55 7 7 6 5 5 5 Y Double Knuckle Joint MM M x.5 M x.5 M x.5 M x.5 M x.5 M x M64 x NDH 5 3 +.4 +.4 +. +. +. +. +. Material: ast iron NX 3..3..3..3..3..3..3..3 RR U 7 33 34 4.5 44 4.5 44 53 66 66 7 Material: ast iron Applicable Part no. bore size A E L MM NDH NX NZ RR U +.4 +.3. Y- 46 M x.5 5 3 +. 64.3 +.4 +.3. Y-4 5 M x.5 +. 7.3 +. +.3. Y-6 55 M x.5 3 +..3 +. +.3. Y- 7 M x.5 +..3 +. +.3. Y- 7 M x.5 +..3 +. +.3. Y-5 9 6 M x +. 6.3 +. +.3. Y- 9 5 5 M64 x +..3 7 34 4.5 4.5 53 66 4 46 54 54 7 Use a single knuckle joint or a double knuckle joint individually. (Screw it entirely over the rod end threads and tighten it.) Extend the dimensions of A, H. when using a single/double knuckle joint together with a rod end nut. (To extend dimensions A/H, refer to the table below, and specify the product as Made-to-order -XAO.) Pin and cotter pin are attached for double knuckle joint. The rod end bracket type is available as Made to Order -X6 when ordering the cylinder and attached mounting brackets. Refer to page 4-. l x d Material: arbon steel Applicable bore d Applicable Part no. size Dd9 L l m (Drill through) cotter pin.65 IY- 5. 79.5 69.5 5 4 4 x.65 IY-4. 6.5 76.5 5 4 4 x. IY-6 3.4 94.5 4.5 5 4 4 x. IY-,.4 5 5 4 4 x 55. IY-5.4 44 3 6 5 5 x 65. IY-.4 66 6 5 5 x IY- includes a pin and cotter pins. Rod End Nut Part no. NT- NT-6 NT- NT- NT-5 NT-, d M x.5 M x.5 M x.5 M x.5 M x M64 x Material: H 3 7 34 3 46 55 7 5 95 53..5 69.3... D 44 53 57 67 9 J JP J M G M M A S S 49 D- -X -X
With auto switch uilt in magnet ( to ) (uilt-in magnet) Symbol Nil F,,, Tubing material Aluminum tube Steel tube Steel tube SW DSW Double rod type Mounting style Stroke range Without switch or less or less or less or less Note) or less or less or less L L asic style Foot style Rod side flange style enter trunnion style Tubing material With switch or less or less or less 9 or less or less or less Refer to page for the maximum strokes. Note) For items corresponding to the lass Pressure Vessel Act, the material is aluminum alloy. L F T uilt-in magnet cylinder model If a built-in magnet cylinder without auto switch is required, there is no need to enter the symbol for auto switch. (Example) DSW- Lead wire length symbols:.5 m Nil (Example) M9NW m M (Example) M9NWM 3 m L (Example) M9NWL 5 m Z (Example) M9NWZ How to Order Nil N H Port thread type Nil TN TF Rc NPT G, mm mm mm mm mm mm mm mm mm mm It is not available with auto switch. ylinder stroke (Refer to Maximum Stroke on page.) Applicable Auto Switch/Refer to pages to 37 for further information on auto switches. Reed switch Solid state switch Special function Diagnostic indication (-color indication) Water resistant (-color indication) With diagnostic output (-color indication) Diagnostic indication (-color indication) Electrical entry 3-wire (NPN) Grommet 3-wire (PNP) 4 V -wire Terminal 3-wire (NPN) conduit -wire Yes 3-wire (NPN) 3-wire (PNP) -wire 4 V Grommet 3-wire (NPN) 3-wire (PNP) -wire 4-wire (NPN) 3-wire(NPN equivalent) Yes Grommet Terminal conduit DIN terminal Grommet Indicator light No Yes No Yes Wiring (Output) -wire 4 V Load voltage M9N M9P M9 J5 M9NW M9PW M9W M9NA M9PA M9A FF A96 A93 A A54 A64 AW and mounting G K A33 A34 A44 M9W Number of auto swithes Nil pcs. 3 3 pcs. S pc. n n pcs. Auto switch Nil Without auto switch Suffix for cylinder Rod boot in one side Rod boot in both sides ushion J K JJ KK N R H Nil Nylon tarpaulin Heat resistant tarpaulin Nylon tarpaulin Heat resistant tarpaulin Without cushion With cushion in rod side With cushion in head side With cushion in both sides ( type has no cushion.) If specifying more than one symbol, indicate them in alphabetically. type has no cushion. No symbol indicates no cushion. Solid state auto switches marked with are produced upon receipt of order. Since there are other applicable auto switches than listed above, refer to page 4 for details. For details about auto switches with pre-wired connector, refer to pages 3 and. D-A9/M9/M9W/M9AL auto switches are shipped together (not assembled). (Only auto switch mounting brackets are assembled before shipped.) D 5 V, V V 5 V, V V 5 V, V V 5 V, V A V, V 5 V, V 5 V V V 5 V, V V or less V, V V or less V V, V Auto switch model Tie-rod mounting Water resistant type auto switches can be mounted on the above models, but in such case SM cannot guarantee water resistance. onsult with SM regarding water resistant types with the above model numbers. 4 Air ylinder: Double Rod Series SW, :,,,,,, :,, For the aluminum tubing of bore sizes, and, a new Series S model is now available with reduced weight and self weight V deflection. Please consider using the S series. Refer to the table below for the applicable auto switch model. Lead wire length (m).5 3 5 (Nil) (M) (L) (Z) Pre-wired connector Made to Order (Refer to page for details.) Applicable load I circuit I circuit I circuit I circuit I circuit I circuit I circuit Relay, PL Relay, PL PL Relay, PL
Air ylinder: Double Rod Series SW JIS Symbol Made to Order Specifications (For details, refer to pages 373 to 4.) Symbol Specifications XA hange of rod end shape X6 Heat-resistant cylinder ( to ) X4 With heavy duty scraper X5 Heat resistant cylinder ( ) X6 Piston rod and rod end nut made of stainless steel X4 hange of trunnion bracket mounting position X5 hange of tie-rod length X Rod side trunnion X With coil scraper Refer to pages 4 to 4 for auto switch specifications. Minimum auto switch mounting stroke Proper auto switch mounting position (detection at stroke end) and mounting height Operating range Switch mounting bracket: Part no. Specifications, Fluid Air Turbine oil Proof pressure.57 MPa Note) Max. operating pressure Min. operating pressure Piston speed ushion Ambient and fluid temperature.97 MPa.5 MPa to mm/s Interchangeable Without switch to 7 (No freezing) With switch to (No freezing).97 MPa.6 MPa.5 to mm/s None 5 to Stroke length tolerance st or less: +. 5 to, st : +.4, to, st : +. Mounting asic style, Foot style, Rod side flange style, enter trunnion style Note) Item corresponding to lass Pressure Vessel Act is.46 MPa. Maximum Stroke Tubing material Mounting bracket,, Accessory Option Aluminum tube Steel tube Without switch With switch Without switch asic style, Foot style, Rod side flange style, enter trunnion style or less or less or less or less or less 9 or less Note ) Mounting asic style Foot style Rod end nut Single knuckle joint Double knuckle joint (levis pin, otter pin) Rod boot or less or less or less or less Note ) or less Note ) For models with a bore size of with auto switches, strokes of 999 to are available as special orders. Note ) For items corresponding to the lass Pressure Vessel Act, the material is aluminum tubing. Rod side flange style enter trunnion style Mounting racket Part No. Foot style SW-L SW-L4 SW-L6 SW-L SW-L SW-L5 SW-L Flange style S-F S-F S-F6 S-F S-F S-F5 S-F Order two foot brackets per cylinder. J JP J M G M M A S S lass Pressure Vessel In the case of exceeding the following strokes, the cylinder is subject to lass Pressure Vessel Act. ylinder stroke 9 3 4 Rod oot Material Symbol Material Maximum ambient temperature J Nylon tarpaulin 7 K Heat resistant tarpaulin Maximum ambient temperature for the rod boot itself. D- -X -X
Series SW Principal Parts Material and Surface Treatment Tube Sliding seal Piston over,,,,, Piston rod Material plate Aluminum alloy arbon steel tube arbon steel tube Note) NR NR NR arbon steel ast iron (With auto switch: Aluminum alloy casted) Aluminum alloy casted (Iron tube: ast iron) Aluminum alloy casted (Iron tube: ast iron) Note lack painted Hard anodized Hard chrome plated Hard chrome plated Note) JIS O-ring Hard chrome plated hromated (In the case of aluminum alloy casted) hromated (In the case of aluminum alloy casted) hromated (In the case of aluminum alloy casted) In the case of an auto switch with bore sizes and, tubing material is aluminum alloy (hard anodized). Piston seal is NLP. Note) For items corresponding to the lass Pressure Vessel Act, the material is Aluminum alloy and the note should state Hard anodized. Mass/Aluminum Tube: (, ) asic style 6.5 (5.) 9.6 (.) 6.65 (4.79) (kg) asic mass Foot style Rod side flange style.4 (6.9) 9.9 (.96).4 (.64) 4.6 (3.) 9. (7.) 33.4 (3.) Trunnion style.64 (9.4) 5. (3.5) 34.5 (3.9) Add l mass per each mm stroke.57.76 3.3 Single knuckle.9.6. Accessory bracket Double knuckle (Knuckle pin, otter pin).37.. Rod end nut.6.6.3 ( ): Denotes the non-lube and air-hydro type. alculation: (Example) SWL- asic mass.4 (Foot style, ) Additional mass.57/ stroke ylinder stroke stroke.4 +.57 x / =.99 kg Mass/Steel Tube asic mass asic style Foot style Trunnion style Add l mass per each mm stroke Accessory bracket Rod side flange style Single knuckle Double knuckle (Knuckle pin, otter pin) Rod end nut (kg) 6.5.3 7...79 5....55 9.9 4..67 94.6.67 9.53 5.3 33.5 46.73 57.7 7. 5.. 3.46.9 5.76 3..6 34.5 4.57..37...6.6.3.5 6. 3.7.7 7.9. 3.. 5.3 6. 5.. 4.74 4. 9...3.5.6.
Air ylinder: Double Rod Series SW onstruction, With auto switch type With auto switch J JP J Aluminum tube Steel tube to, M G M M A S S omponent Parts No. Rod cover ylinder tube Material to Aluminum alloy to arbon steel tube Note lack painted Hard anodized Inside: Hard chrome plated 3 4 5 6 7 9 3 4 5 6 9 Piston Piston rod A Piston rod Retaining plate ushing Valve guide Tie-rod Tie-rod nut Spring washer Retaining plate bolt Spring washer ushion ring A ushion valve Spacer A Air releasing Air releasing A heck ball Magnet ast iron arbon steel arbon steel ast iron Lead-bronze casted rass arbon steel Steel wire hromium molybdenum steel Steel wire hromium molybdenum steel hrome bearing steel Hard chrome plated Hard chrome plated lack painted hromated lack zinc chromated lack zinc chromated lack zinc chromated lack zinc chromated Zinc chromated Electroless nickel plated Zinc chromated In the case of the aluminum tube of non-lube and airhydro type, piston material is an aluminum alloy casted. In the case of auto switch bore size and, piston material is aluminum alloy casted and tubing material is aluminum alloy (hard anodized). Aluminum tube Seal List Auto switch No. Material Note Wiper ring ushion seal Rod seal 3 Piston seal 4 Valve seal 5 Tube gasket NR 6 Piston gasket 7 Retaining plate gasket Guide gasket Seals except @ and @3 are the same as lube type. Rod seal 3 Piston seal NR Seals except @ and @3 are the same as lube type. No. Material Note Rod seal 3 Piston seal NR (With switch) Seals except # are the same as lube type. No. Material Note 3 Piston seal NR Replacement Parts (Seal kit) For replacement parts no. (seal kits) of double rod style cylinder for Series SW, refer to page 4. Seal kits does not include cushion seal, piston seal and guide gasket because those are not replaceable parts. 3 D- -X -X
Series SW Double Acting, Double Rod/Replacement Parts /Seal kit When ordering the replacement parts (seal kits) for Series SW double rod type cylinder, indicate the order number listed in the table at right. Each set of replacement parts contains the following: wiper ring, rod seal, piston seal, valve seal, tube gasket, and push plate gasket (for cylinder). Kit no. SW-A-PS SW-A-PS SW-A-PS SW-A-PS SW-A-PS SW-A-PS SW-A-PS omponent part numbers: @, @, @3, @4, @5, @7 Seal kit includes a grease pack ( to : g, and : g, and : g). Order with the following part number when only the grease pack is needed. Grease pack part no.: GR-S- ( g), GR-S- ( g) with Auto Switch Kit no. SWNA-PS SWNA-PS SWNA-PS SWNA-PS SWNA-PS SWNA-PS SWNA-PS omponent part numbers: @, @, @3, @4, @5, @7 It is not available with auto switch. Seal kit includes a grease pack ( to : g, and : g, and : g). Order with the following part number when only the grease pack is needed. Grease pack part no.: GR-S- ( g), GR-S- ( g) with Auto Switch Kit no. SWA-PS SWA-PS SWA-PS DSWA-PS DSWA-PS omponent part numbers: @, @, @4, @5, @7, # Seal kit includes a grease pack ( to : g, and : g). Order with the following part number when only the grease pack is needed. Grease pack part no.: GR-S- ( g), GR-S- ( g) Kit no. SWHA-PS SWHA-PS SWHA-PS omponent part numbers: @, @, @3, @4, @5, @7 4
Air ylinder: Double Rod Series SW asic Style: SW type (SW), type (SWN), type (SWH) x P J JP (One side) ZZ + stroke H + Stroke J M G e M d M l f h + l ZZ + l + stroke ( on one side) A S (oth sides) MM FA G x P G FA MM S d d E e D D e E AL A K l h + l f N ZZ + l + stroke N M f l + Stroke K h + l + Stroke AL A Stroke range Without rod boot Up to to Up to to Up to to Up to to Up to to Up to to Up to to Without rod boot H 5 ZZ 3 3 346 3 3 46 496 d 9 96 A 7 AL 53 67 76 6 44 4 6 6 77 5 3 7 D 7 E (Single side) (oth sides) e f h l ZZ ZZ 75 33. stroke 34 4 75 33. stroke 34 4 75 4. stroke 7 3 5 53. stroke 9 4 53. stroke 9 4 5 55 6. stroke 7 493 55. stroke 5 EA 7 74 6 96 F FA 4 4 4 G 6 6.5.5.5 3 3 J M4 x.5 M4 x.5 M6 x.5 M x.5 M x.5 M4 x.5 M x.5 K 5 5 5 KA 3 3 4 46 65 M 7 7.5 4.5 5.5 MM M x.5 M x.5 M x.5 M x.5 M x.5 M x M64 x With Auto Switch: to Only N 49 49 S 6 4 46 Without Stroke range rod boot (Single side) (oth sides) S Without rod boot ZZ ZZ ZZ Up to to 3 34 4 Up to to 3 34 4 Up to to 6 Up to to 346 35 7 3 3 4 Up to 9 to 9 3 46 Refer to Minimum Stroke for Auto Switch Mounting on page 444. P D- -X -X 4
Series SW Foot Style: SWL type (SWL), type (SWLN), type (SWLH) x RcP ZZ + stroke H + Stroke 4 x LD L h + l l f d e ZZ + l + stroke ( on one side) ZZ + l + stroke ( on both sides) Stroke range Without rod boot Up to to Up to to Up to to Up to to Up to to Up to to Up to to A 7 AL 53 67 76 6 4 6 77 3 44 6 5 7 D 7 E EA 7 74 6 96 F FA 4 4 4 G 6 6.5.5.5 3 3 J M4 x.5 M4 x.5 M6 x.5 M x.5 M x.5 M4 x.5 M x.5 K 5 5 5 KA 3 3 4 46 65 LD 9 9 9 4 4 9 33 LH 5 6 3 LS 6 3 3 LT 9 9 5 LX 3 LY 57.5.5 97 7.5 5 MM M x.5 M x.5 M x.5 M x.5 M x.5 M x M64 x N 49 49 P S 6 4 46 X Y 5 Without rod boot H ZZ 3 3 346 3 3 46 5 496 d 9 96 (Single side) e 75 75 75 5 5 f 55 55 h 33 33 4 53 53 6 l. stroke. stroke. stroke. stroke. stroke. stroke. stroke ZZ 34 34 7 9 9 7 5 (oth sides) ZZ 4 4 3 4 4 493 With Auto Switch: to Only Stroke range Without rod boot S LS Up to Up to Up to Up to Up to 9 to to to to to 9 6 6 3 3 346 35 3 Refer to Minimum Stroke for Auto Switch Mounting on page 444. Without rod boot ZZ (Single side) ZZ 34 34 7 3 (oth sides) ZZ 4 4 3 4 46 4
Air ylinder: Double Rod Series SW Rod Side Flange Style: SWF type (SWF), type (SWFN), type (SWFH) 4 x FD x RcP J JP d e l f h + l ZZ + l + stroke ( on one side) ZZ + l + stroke ( on both sides) H + Stroke ZZ + stroke J M G M M A S S Stroke range Without rod boot Up to to Up to to Up to to Up to to Up to to Up to to Up to to A 7 AL 53 67 76 5 75 3 6 4 6 77 3 44 6 5 7 D 7 E EA 7 74 6 96 F FA 4 4 4 FD 9 9 9 4 4 9 33 FT 4 5 5 FX 65 5 FY 3 FZ 55 75 3 5 G 6 6.5.5.5 3 3 J M4 x.5 M4 x.5 M6 x.5 M x.5 M x.5 M4 x.5 M x.5 K 5 5 5 KA 3 3 4 46 65 M 4 6 3 3 MM M x.5 M x.5 M x.5 M x.5 M x.5 M x M64 x N 49 49 P S 6 4 46 Without rod boot H ZZ 3 3 346 3 3 46 5 496 (Single side) d 9 96 e 75 75 75 5 5 f 55 55 h 33 33 4 53 53 6 l. stroke. stroke. stroke. stroke. stroke. stroke. stroke ZZ 34 34 7 9 9 7 5 (oth sides) ZZ 4 4 3 4 4 493 With Auto Switch: to Only Stroke range Without rod boot S Without rod boot ZZ Up to Up to Up to Up to Up to 9 to to to to to 9 6 3 3 346 35 3 Refer to Minimum Stroke for Auto Switch Mounting on page 444. (Single side) ZZ 34 34 7 3 (oth sides) ZZ 4 4 3 4 46 D- -X -X 7
Series SW enter Trunnion Style: SWT type (SWT), type (SWTN), type (SWTH) Z + / stroke x RcP Z + / stroke ZZ + stroke H + Stroke Z + l + / stroke d e l f h + l ZZ + l + stroke ( on one side) ZZ + l + stroke ( on both sides) Stroke range Without rod boot A AL D E EA F FA G J K KA M MM N P 5 to to 4 6 M4 x.5 5 3 9 M x.5 to to 6 4 6 M4 x.5 5 3 9 M x.5 to to to to to to to to to to 7 53 67 76 4 6 77 3 44 6 5 7 7 7 74 6 96 4.5.5.5 3 3 M6 x.5 M x.5 M x.5 M4 x.5 M x.5 5 4 46 65 6 6 M x.5 M x.5 M x.5 M x M64 x 49 49 Without rod boot (Single side) (oth sides) TDe TT TX TY TZ H Z ZZ d e f h l Z ZZ Z ZZ. 3.9 64 34 3 75 33. stroke 34 4..9 55 4 6 3 75 33. stroke 34 4..9 4 9 3 346 75 4. stroke 94 7 94 3..9.5 3 9 5 53. stroke.5 9.5 4..9 65 57 5.5 3 96 53. stroke.5 9.5 4..6 69 3 4.5 46 5 55 6. stroke 46.5 7 46.5 493. 67.6 79 3 534 5 496 55. stroke 5 R S.5.5 6 4 46 With Auto Switch: to Only Stroke range Without rod boot (Single side) (oth sides) S Without rod boot Z ZZ Z ZZ ZZ 5 to to 3 34 4 to to 3 34 4 to to to 9 to to to 9 6 3 9.5 95 346 35 3 94.5 3 7 3 3 4 46 Refer to Minimum Stroke for Auto Switch Mounting on page 444.
With auto switch L F G D T Mounting style asic style Foot style Rod side flange style Head side flange style Single clevis style Double clevis style enter trunnion style uilt-in magnet cylinder model If a built-in magnet cylinder without auto switch is required, there is no need to enter the symbol for auto switch. (Example) DSLQ- S DS L Q L Low friction type Q linder tube bore size mm mm mm Port thread type Nil TN TF How to Order Rc NPT G ylinder stroke Refer to Standard Stroke on page 4. 4V 4V 4V M9W Number of auto switches Nil pcs. S pc. 3 3 pcs. n n pcs. Auto switch Nil Without auto switch Refer to the table below for the applicable auto switch model. Suffix for cylinder Rod boot ushion Applicable Auto Switch/Refer to pages to 37 for further information on auto switches. Reed switch Solid state switch With auto switch (uilt-in magnet) Special function Diagnostic indication (-color indication) Water resistant (-color indication) With diagnostic output (-color indication) Electrical entry Grommet Grommet DIN terminal Diagnostic indication (-color indication) Grommet Air ylinder: Low Friction Series SQ,, Terminal conduit Grommet Terminal conduit Indicator light Yes Yes Yes No Yes No Wiring (Output) 3-wire (NPN) 3-wire (PNP) -wire 3-wire (NPN) -wire 3-wire (NPN) 3-wire (PNP) -wire 3-wire (NPN) 3-wire (PNP) -wire 4-wire (NPN) 3-wire(NPN equivalent) -wire J K A R H Nil Made to Order (Refer to page 4 for details.) Nylon tarpaulin Heat resistant tarpaulin With cushion in both sides With cushion in rod side With cushion in head side Without cushion If specifying more than one symbol, indicate them alphabetically. Load voltage Auto switch model Lead wire length (m).5 3 5 D A and mounting (Nil) (M) (L) (Z) 5V,V V 5V,V V 5V,V V 5V,V V 5V,V 5V V 5V,V V V, V V V or less V, V V or less V, V Tie-rod mounting M9N M9P M9 J5 M9NW M9PW M9W M9NA M9PA M9A FF A96 A93 A A54 A64 AW For the aluminum tubing of bore sizes, and, a new Smooth ylinder Series SY to realize dual-side low friction and low-speed operation. (Refer to est Pneumatics No. 3.) G K A33 A34 A44 Pre-wired connector Applicable load I circuit I circuit I circuit I circuit I circuit I circuit I circuit Water resistant type auto switches can be mounted on the above models, but in such case SM cannot guarantee water resistance. onsult with SM regarding water resistant types with the above model numbers. Lead wire length symbols:.5 m Nil (Example) M9NW Solid state auto switches marked with are produced upon receipt of order. m M (Example) M9NWM 3 m L (Example) M9NWL 5 m Z (Example) M9NWZ Since there are other applicable auto switches than listed above, refer to page 4 for details. For details about auto switches with pre-wired connector, refer to pages 3 and. D-A9/M9/M9W/M9AL auto switches are shipped together (not assembled). (Only auto switch mounting brackets are assembled before shipped.) Relay, PL Relay, PL PL Relay, PL 9 J JP J M G M M A S S D- -X -X
Series SQ Designed with a low sliding resistance of the piston, this air cylinder is ideal for applications such as contact pressure control, which requires smooth movements at low pressures. Application Example Low friction cylinder is used in combination with precision regulator (Series IR). Driving roller Widing roller Precision regulator Precision regulator (Moving object) Low sliding resistance Min. operating pressure.5 MPa Auto switch mounting is possible. Specifications Action Direction of low friction Fluid Proof pressure Maximum operating pressure Minimum operating pressure Ambient and fluid temperature Allowable leakage ushion Lubrication Mounting Double acting, Single rod oth directions Air.5 MPa.7 MPa.5 MPa.5l/min (ANR) or less None (With cushion is available.) Not required (),, asic style, Foot style, Rod side flange style, Head side flange style, Single clevis style, Double clevis style, enter trunnion style In the case of w/ cushion, pressure inside cushion stroke is not included. JIS Symbol Double acting Maximum Stroke Tubing material Mounting bracket Aluminum tube (with auto switch) asic style, Head side flange style Single clevis style, Double clevis style enter trunnion style Rod side flange style or less or less or less Iron tube (without auto switch) asic style, Head side flange style Single clevis style Double clevis style enter trunnion style or less or less or less Foot style Rod side flange style or less or less or less Made to Order Specifications (For details, refer to pages 373 to 4.) Symbol Specifications XA hange of rod end shape X3 Special port location X4 hange of trunnion bracket mounting position X5 hange of tie-rod length X6 levis pins with flat washer Refer to pages 4 to 4 for auto switch specifications. Minimum auto switch mounting stroke Proper auto switch mounting position (detection at stroke end) and mounting height Operating range Switch mounting bracket: Part no. X7 Double clevis pins made of stainless steel (Stainless steel 4) X Rod side trunnion 4
Air ylinder: Low Friction Series SQ Mounting racket Part No. Foot style S-L Flange style S-F Single clevis style S- Double clevis style S-D Order two foot brackets per cylinder. Accessory asic Mounting style style Standard equipment levis pin Rod end nut Single knuckle joint Option Double knuckle joint (Knuckle pin, otter pin) Rod boot Foot style S-L4 S-F4 S-4 S-D4 Rod side flange style Principal Parts Material and Surface Treatment over Tube Sliding part seal Piston rod Piston Material plate Aluminum alloy (with auto switch) arbon steel tube (without auto switch) NR arbon steel Aluminum alloy casted Head side Single flange style clevis style Mass/Steel Tube (For aluminum tube [with auto switch], refer to page 49.) asic mass asic style Foot style Rod side flange style Head side flange style Single clevis style Double clevis style Trunnion style 5. 6.3...7.73 9.33.3. 3.3 3.3.67 3.4 4. Additional mass per each mm of stroke.66 3. Accessory bracket Single knuckle Double knuckle (With pin).9.37.6. alculation: (Example) SLQ, asic mass.4 (Foot style, ) Additional mass 3.5/ stroke ylinder stroke stroke,.4 + 3.5 x / =.94 kg Sliding Resistance S-L6 S-F6 S-6 S-D6 Double clevis style 5.4.4 3. 3..73 3.5 3.64 3.5.. enter trunnion style Note lack painted Hard anodized Inside: Hard chrome plated Hard chrome plated hromated (kg) Rod oot Material Symbol J K Material Nylon tarpaulin Heat resistant tarpaulin Maximum ambient temperature for the rod boot itself. J JP J M G M M A S S Sliding resistance (MPa) (onverted into cylinder operating pressure)..5...3.4.5.6.7 Pressure (MPa) 44 D- -X -X
Series SQ onstruction omponent Parts No. Material Note No. Material Note 3 4 5 6 7 9 3 4 5 6 Rod cover Head cover ylinder tube Piston Piston rod Retaining plate ushing Valve guide Tie-rod Tie-rod nut Spring washer Retaining plate bolt Spring washer ushion ring A ushion ring ushion valve Wear ring With auto switch plate plate Aluminum alloy arbon steel tube Aluminum alloy casted arbon steel ast iron abbitt rass arbon steel Steel wire hromium molybdenum steel Steel wire Resin lack painted lack painted Hard anodized Hard chrome plated hromated Hard chrome plated lack painted hromated lack zinc chromated lack zinc chromated lack zinc chromated lack zinc chromated Zinc chromated Zinc chromated Electroless nickel plated Seal List Wiper ring 9 ushion seal Rod seal Piston seal NR Valve seal 3 Tube gasket 4 Piston gasket 5 Retaining plate gasket 6 Guide gasket It is used only in the case of w/ cushion type. Low Friction Kit no. SQA-PS SQA-PS SQA-PS omponent part numbers: @3, @5, @6, @7, @, # Since the seal kit does not include a grease pack, order it separately. Grease pack part no.: GR-L-5 (5 g), GR-L- ( g), GR-L- ( g) Seal kits does not include cushion seal, piston seal and guide gasket because those are not replaceable parts. asic Style: SQ Dimensions: According to Mounting rackets External dimensions for each mounting bracket other than basic style are the same as standard type. Refer to pages 4 to. x P EA ZZ + Stroke Stroke range A AL D E EA F G J K KA M MM N P S H ZZ Up to Up to Up to 53 6 44 6 6.5 M4 x.5 M4 x.5 M6 x.5 5 5 3 3 7 7.5 M x.5 M x.5 M x.5 / / 3 /4 6.5 44
Air ylinder Series S Proper Auto Switch Mounting Position (Detection at stroke end) and Mounting Height and mounting type D-A3 D-G3/K3 D-A44 ~ Hs = Auto switch Auto switch Applicable cable O.D. 6. to.5 Applicable cable O.D. 6. to 9.6 ~ Hs = Tie-rod mounting type D-A9A9V D-M9/M9V D-M9W/M9WV D-M9AL/M9AVL D-A5/A6 A D-F5/J5/D-F5NTL D-F5AL/FF D-F5W/JW D-Z7/Z D-Y/Y69/Y7P/Y7PV D-Y7W/Y7WV D-Y7AL Auto switch Auto switch ~ Ht ~ = =Ht ~ =Ht ~ =Ht ~ = Ht ~ Hs = ~ Hs = ~ Hs = J JP J M G M M A S S Proper Auto Switch Mounting Position Auto switch model D-A9 D-A9V A 4 4 4 9.5 4 4 4 7.5 D-M9 D-M9V D-M9W D-M9WV D-M9AL D-M9AVL A 3.5 6.5 4 Auto Switch Mounting Height D-Z7/Z D-Y5/Y6 D-Y7P/Y7PV D-Y7W D-Y7WV D-Y7AL A.5.5.5 7 9.5.5.5.5 5 7.5 Auto switch D-Z7/Z model D-A9 D-Y5/Y6 D-A9V D-M9V D-Y7P D-M9 D-M9WV D-Y7PV D-M9W D-M9AVL D-Y7W D-M9AL D-Y7WV D-Y7AL Hs 69 76 5 95 6 Ht 69.5 76 5 95 6 Hs 7.5 77.5 6 95.5 6 Ht 69.5 76 5 95 6 Hs 69 76 5 95 6 Ht 69.5 76 5 95 6 * Low friction type (DSQ):,, D-A5 D-A6 D-A3 D-A44 D-G D-K A 3.5.5 6 4 D-A3 D-G D-K Hs 6 4 34.5 44 54 D-AW A 7.5 D-A44 Ht 6 34 44.5 54 64 5.5 D-F5W D-JW D-F5AL D-F5 D-J5 D-FF A 4.5 4.5 4.5 4.5 4.5 4.5.5.5 * The mounting position should be referred for reference only for the auto switch mounting position at the stroke end detection. Adjust the auto switch after confirming the operation to set actually. * Low friction type (DSQ):,, D-A5 D-A6 D-AW Hs 75.5 9 97 7 Ht 69.5 76.5 7.5 97.5 D-F5NTL A 9.5 9.5 9.5 5.5 9.5 9.5 9.5 3 5.5 D-F5 D-J5 D-F5W D-JW D-F5AL D-FF D-F5NTL Hs Ht 74.5 7 76.5 7.5 96 97.5 7.5 4 D- -X -X