onduit Hubs, able Glands & reather SSORIS onduit Hubs: or connecting conduit. Sizes - NPT. or Hazardous (classified) Locations. Zinc. able Glands: or connecting all types of cables. Sizes -4" NPT. or Wet and Hazardous (classified) Locations. Several gland materials available. reather: or ventilation. xplosion protection increased safety. INNOVTIV XPLOSION PROTTION by R. STHL 1-800-782-4357 J
ONTNTS ccessories................................................ J-J9 8166/11 Hazardous Location onduit Hubs...............................................................J1 8162/9 reather rain...............................................................................j2 able Glands and ccessories......................................................................j3-j9 Our products are updated to the newest standard developments and technologies which makes it necessary to reserve the right to product changes without notice. INNOVTIV XPLOSION PROTTION by R. STHL 1-800-782-4357
SSORIS 8166/11 Series onduit Hubs ONUIT HUS OR HZROUS (LSSII) LOTIONS LSSIITIONS N- lass I, Zones 1, x e II lass I, ivision 2 lass II, ivisions 1 & 2, Groups & G lass III - x e II lass I, ivision 2 lass II, ivision 2, Groups & G lass III nvironmental Protection Types 3, 4 and 4X; IP66 ile No. 200949 II 2 G x e II PT 00 TX 1114U Ingress Protection IP66 mbient Temperature Range +100 (+212 ) Max. 30 ( 22 ) Min. Grounding Terminal apacity: One or two copper wires, 14 to 8 WG, solid or stranded TURS The 8166/11 Series of onduit Hubs are listed for hazardous (classified) locations as specified above and are suitable for installation of rigid conduits with - NPT threads to metallic and non-metallic enclosures with appropriate ratings. They also provide a sure watertight seal by means of an embedded O Ring. They are made of zinc and are provided with a protective, insulated throat. The grounding locknut provides an increased safety terminal which prevents the ground wire from rotating when tightening. The locknut also has a set screw which after tightening provides firm metal-to-metal connection between the HU body and the locknut. Hazardous Location onduit Hubs with Increased Safety Grounding Terminal Ordering Information imensions in Inches Size atalog (H) nclosure NPT Number Thru Hole I.. 8166/11-01-N 7/8" 8166/11-02-N 1-1/8" 8166/11-03-N 1-3/8" 8166/11-04-N 1-1- 8166/11-05-N 8166/11-06-N 2-2- 8166/11-07-N 8166/11-08-N 3-5/8" Hub with e (I) G grounding nut (O..) (min.) (max.) (O..) 8166/11-01-N 1.31 1.54 0.73 0.56 0.65 1.54 0.34 0.80 8166/11-02-N 1.37 1.73 0.78 0.79 0.85 1.73 0.39 0.85 8166/11-03-N 1.59 2.04 0.90 1.01 1.08 2.04 0.46 0.92 8166/11-04-N 1.59 2.42 0.90 1.32 1.41 2.42 0.46 0.92 8166/11-05-N 1.59 2.79 0.90 1.54 1.65 2.79 0.46 0.92 8166/11-06-N 1.59 3.29 0.90 1.98 2.10 3.29 0.46 0.92 8166/11-07-N 1.47 3.70 1.56 2.44 2.49 3.70 0.56 1.00 8166/11-08-N 1.47 4.39 1.56 3.05 3.10 4.39 0.56 1.00 G J1 INNOVTIV XPLOSION PROTTION by R. STHL 1-800-782-4357
8162/9 Series reather SSORIS LSSIITIONS N- lass I, Zones 1 & 2 x e II lass I, ivision 2 LIST - ile No. 200949 ile No. 3000248 : Nylon Ingress Protection IP54, Type 3R when installed in enclosures of the same rating Ordering Information SRIPTION reather 8162/9 Thread NPT Parts SRIPTION elt Washer TLOG NUMR 1 piece 81 620 03 01 0 100 pieces 81 620 05 02 0 SIGNTION TLOG NUMR Polyamide 81 628 01 52 0 pplication The breather is designed for ventilation where there is the possibility of moisture or condensation being trapped within an enclosure. eatures: The breather is suitable for installation in conduit hubs or drilled and tapped conduit openings of general purpose or increased safety enclosures. They must be protected from severe impact. The felt insert is replaceable. 20 piece imensions P1 ø 1.18" (ø 30 mm) 1.06" (27 mm) P2 1.4 (36 mm) 0.6" (15 mm) NPT Temperature-dependent pressure differences between the interior of an enclosure (P1) and the external atmosphere (P2) are reliable equalized by means of the breather. ondensation build-up in the enclosure is thus kept to a minimum. INNOVTIV XPLOSION PROTTION by R. STHL 1-800-782-4357 J2
SSORIS 2KX able Glands OR WT & HZROUS LOTIONS LSSIITIONS N- lass I, Zone 1, x e II lass I, iv. 2, Groups,, & NOT: When installed in compliance with the N. Types 4X; IP66, IP67 & IP68 NOT: or IP67 and IP68 requirements the cable diameter (minimum value) shown in table should be increased by 1.0 mm to ensure compliance. ile No. UW.200163 JR.256367 ertificate No. 1310517 MRIN PPROVLS Lloyds pproval No.: 01/00171 Gost K ert. No.: KZ7500052.05.01.00063 RoK pproval No.: 08-06/7693 NV pproval No.: -8119 S pproval No.: 01-L234401/1-P Ingress Prot. oc.: 5046 549G eluge Prot. ompliance: TS01 : 91 eluge Prot. oc.: 5046 549G- ontinuous Operating Temperature +130 (+266 ) Max. 60 ( 76 ) Min. TURS The 2KX cable gland is suitable for use with armored and jacketed cables with wire braid armor. The cable gland provides mechanical retention and electrical continuity via the armor termination. The standard cable gland material is rass with lectroless Nickel Plated rass entry component as pictured above. al materials are: rass, Stainless or rass - ully lectroless. Ordering Information (imensions in Inches) L GLN SIZ NPT 1-2- 2-3- THR LNGTH MX. L ING I. 0.461 0.461 0.551 1.035 1.268 1.504 1.736 1.969 5 2.441 2.677 3.150 OVRLL L MX. 0.240 0.374 0.492 0.551 0.717 0.933 1.098 1.386 1.795 2.150 2.323 2.626 3.000 0.453 0.626 0.823 0.866 1.031 1.335 1.839 2.091 2.339 2.594 2.839 3.091 3.559 TYP 2KX Standard Gland rass with ntry omponent al Gland rass, Stainless or rass - ully lectroless Seal SOLO LS Thermoplastic lastomer able Type rmored & Jacketed rmor lamping etachable rmor one & nyway Universal lamping Ring Sealing Technique Unique LRS Outer Seal (Load Retention Seal) Sealing rea(s) able Outer Jacket al ccessories Locknut, Shroud, ntry Thread See page J9 Seal, Serrated Washer, dapter/reducer RMOR RNG MX. 63 0.945 0.945 1.201 1.476 1.476 1.811 2.165 2.362 2.756 2.953 3.150 3.504 3.898 4.488 ROSS LTS RNRS. MX. MX. 1.047 1.047 1.311 1.594 1.594 2.008 2.402 2.618 3.094 3.276 3.504 4.000 4.374 5.063 NOM. PRO- TRUSION LNGTH 2.382 2.657 2.657 2.736 3.071 2.972 3.169 3.602 3.622 3.898 4.016 4.724 PV SHROU R. PV06 PV06 PV06 PV09 PV09 PV11 PV15 PV18 PV21 PV23 PV25 PV28 PV30 PV32 The standard is rass with lectroless ntry component, indicated by a 7 in the atalog Number. or other s change the 7 to the indicated number of the material options: Technical ata TLOG NUMR 20S162KX1R731 20S2KX1R731 202KX1R731 25S2KX1R732 252KX1R732 322KX1R733 402KX1R734 50S2KX1R735 502KX1R736 63S2KX1R736 632KX1R737 75S2KX1R737 752KX1R738 902KX1R739 Insert 1- luminum 4- Stainless 5- rass - ully lectroless J3 XPLOSION PROTTION by R. STHL 1-800-782-4357
T3S able Glands SSORIS OR WT & HZROUS LOTIONS LSSIITIONS Ordering Information (imensions in Inches) L GLN SIZ NPT 1-2- 2-3- THR LNGTH Technical ata L ING MX. 0.122 0.240 0.256 0.437 0.437 0.866 1.161 1.402 1.579 1.858 2.079 2.327 2.622 0.343 0.461 0.551 1.035 1.268 1.504 1.736 1.969 5 2.441 2.677 3.126 OVRLL L MX. 0.240 0.374 0.492 0.551 0.717 0.933 1.098 1.386 1.795 2.150 2.323 2.626 3.000 TYP T3S Standard rass with lectroless Gland rass ntry omponent esign UL 514 Specifications Seal SOLO LS Thermoplastic lastomer able Type rmored & Jacketed, Wire raid rmor, Served (Single) Wire rmor (SW) rmor Reversible rmor one & lamping nyway Universal lamping Ring Sealing Inner S System & Unique Technique LRS Outer Seal (Load Retention Seal) Sealing rea(s) able Inner edding & Outer Jacket al Locknut, Shroud, ntry Thread Seal, ccessories Serrated Washer See page J9 0.453 0.626 0.823 0.866 1.031 1.335 1.839 2.091 2.339 2.594 2.839 3.091 3.559 ROSS LTS RNRS. MX. MX. 0.945 1.047 0.945 1.047 1.201 1.311 1.476 1.594 1.476 1.594 1.811 2.008 2.165 2.402 2.362 2.618 2.756 3.094 2.953 3.276 3.150 3.504 3.504 4.000 3.898 4.374 4.488 5.063 XPLOSION PROTTION by R. STHL 1-800-782-4357 NOMINL SSML. LNGTH 2.756 2.756 2.835 3.228 3.228 3.346 3.386 3.858 3.937 4.252 4.355 4.434 4.520 5.512 PV SHROU R. PV02 PV04 PV06 PV09 PV09 PV11 PV15 PV18 PV21 PV23 PV25 PV28 PV30 PV32 The standard is rass with lectroless ntry component, indicated by a 7 in the atalog Number. or other s change the 7 to the indicated number of the material options: rmor Range TLOG NUMR 20S16T3S1R731 20ST3S1R731 20T3S1R731 25ST3S1R732 25T3S1R732 32T3S1R733 40T3S1R734 50ST3S1R735 50T3S1R736 63ST3S1R736 63T3S1R737 75ST3S1R737 75T3S1R738 90T3S1R739 Insert 1- luminum 4- Stainless 5- rass - ully lectroless GLN GROOV ON STPP ON SIZ NPT MX. MX. 1-2- 2-3- 63 35 35 35 49 49 63 63 79 79 79 79 79 79 0.124 49 49 63 63 79 79 98 98 98 98 98 98 0.124 NOT: Stepped one is suitable for SW cables. Grooved one is suitable for all other approved armored cables N- lass I, Zones 1 & 2, x e ll Types 3, 4 & 4X, IP66, 67 & 68 NOT: or IP67 and IP68 requirements the cable diameter (minimum value) shown in table should be increased by 1.0 mm to ensure compliance. ile No. UW.200163, YMJ.256366 & JR.256367 x d II / x e II lass I, iv. 2, Groups,, & lass II, iv. 2, Groups, & G lass III Types 3, 4 & 4X; IP66 & IP68 ertificate 1310517 MRIN PPROVLS Lloyds pproval No.: 01/00172 Gost K ert. No.: KZ7500052.05.01.00063 RoK pproval No.: 08-06/7693 NV pproval No.: -8119 S pproval No.: 01-L234401/1-P Ingress Prot. oc.: ITS 03 1006/Issue 1 eluge Prot. ompliance: TS01 : 91 eluge Prot. oc.: ITS 01005029 ontinuous Operating Temperature +130 (+266 ) Max. 60 ( 76 ) Min. TURS The T3S cable gland is suitable for use with all types of armored and jacketed marine cables with wire braid armor or served (single) wire. The cable gland provides a seal on the cable inner bedding and an environmental seal on the cable outer jacket. The T3S incorporates a unique ompensating isplacement Seal (S) system which provides full compatibility with restricted breathing equipment. The cable gland provides mechanical cable retention and electrical continuity via armor wire termination. reversible armor cone and nyway universal clamping ring allows easy disconnection in confined or areas of restricted access from equipment for maintenance or change out. Separate tightening actions for the inner ompensating isplacement Seal and armor termination creates maximum control over the pressure applied to the cable inner bedding. J4
SSORIS TMX able Glands OR WT & HZROUS LOTIONS LSSIITIONS N- lass I, Zone 1 & 2, x d II lass I, Groups,, & lass II, Groups, & G Ordinary & Wet Locations ile No. YMX7.161256, YMJ.256366 - lass I, Zone 1, x d II / x e II lass I, iv. 1 & 2, Groups,, & lass II, iv. 1 & 2, Groups, & G lass III, iv. 1 & 2 Types 3, 4 & 4X; IP66 & IP68 ertificate No. 1129339 MRIN PPROVLS Lloyds pproval No.: 01/00172 Gost K ert. No.: KZ7500052.05.01.00063 RoK pproval No.: 08-06/7693 NV pproval No.: -8119 S pproval No.: 01-L234401/1-P ontinuous Operating Temperature +130 (+266 ) Max. 60 ( 76 ) Min. TURS The TMX cable gland is suitable for all types of interlocked, continuously welded or corrugated metal clad armor cable and types M, M-HL or TK armored and armored & jacketed cable.the cable gland provides mechanical retention and electrical continuity via the armor termination and an environmental seal on the cable outer jacket. TMX allows for easy disconnection from equipment, for maintenance and change out. The gland utilizes a re-usable compression spring that provides grounding and gripping functions to the cable armor. The standard cable gland material is opper ree luminum (<0.4%), as pictured above. al materials are: Stainless or lectroless Nickel Plated rass. Ordering Information (imensions in Inches) L GLN SIZ NPT 1-2- 2-3- 4 THR LNGTH 0.90 0.90 0.98 1.437 1.437 Technical ata MX. L RMOR I. N STOP IN N STOP OUT MX. MX. 1 0.775 1.083 1.320 1.508 1.772 2.052 2.247 2.543 2.913 0.756 0.969 1.228 1.461 1.677 1.933 2.161 2.406 2.776 3.291 0.342 0.437 0.756 0.969 1.228 1.461 1.677 1.933 2.161 2.406 2.776 3.291 3.500 0.503 0.917 1.150 1.386 1.618 1.854 2.087 2.320 2.545 2.965 3.485 4.020 TYP TMX Standard Gland opper ree luminum (<0.4%) al Gland lectroless rass, Stainless Seal SOLO LS Thermoplastic lastomer / poxy Resin arrier able Type orrugated & Interlocked Metal lad rmor or TK, continuously Welded Metal lad rmor rmor lamping arth ontinuity in ontact with Metal lad rmor (M-HL) Sealing Technique isplacement Seal Sealing rea(s) Inner ompound arrier & able Outer Jacket al ccessories Locknut, Shroud, ntry Thread See page J9 Seal, Serrated Washer, dapter/reducer L JKT MX. 0.354 0.550 0.910 1.161 1.402 1.579 1.858 2.079 2.327 2.622 2.992 3.700 0.550 1.035 1.268 1.504 1.736 2.008 5 2.441 2.677 3.126 3.830 4.220 NVLOP I. ROSS LTS RNRS. 1.18 1.42 1.61 1.96 2.16 2.36 2.78 2.96 3.14 3.35 4.33 5.25 5.25 1.31 1.57 1.79 2.18 2.40 2.62 3.06 3.28 3.49 3.71 4.80 5.82 5.84 NOMINL SSML. LNGTH 2.24 2.24 2.37 2.60 2.81 2.88 2.88 3.92 4.61 7.66 PV SHROU R. PV06 PV09 PV10 PV13 PV16 PV18 PV21 PV24 PV25 PV27 PV32 The standard is opper ree luminum (<0.4%), indicated by an at the end of the atalog Number. or other s change the to the indicated letters of the material options: TLOG NUMR TMX050S TMX050 TMX075 TMX100 TMX125 TMX150 TMX200S TMX200 TMX250S TMX250 TMX300 TMX350 TMX400 Insert SS- Stainless N- lectroless rass J5 XPLOSION PROTTION by R. STHL 1-800-782-4357
TM able Glands SSORIS OR WT & HZROUS LOTIONS LSSIITIONS N- lass I, Zone 1 & 2, x e II Ordinary & Wet Locations ile No. PJOX.163112 YMJ.256366 Ordering Information (imensions in Inches) L GLN SIZ NPT 1-2- 2-3- 4" THR LNGTH 0.90 0.90 0.98 1.437 1.437 MX. L RMOR I. N STOP IN N STOP OUT MX. MX. 1 0.775 1.083 1.320 1.508 1.772 2.052 2.247 2.543 2.91 0.756 0.969 1.228 1.461 1.677 1.933 2.161 2.406 2.776 3.291 0.342 0.437 0.756 0.969 1.228 1.461 1.677 1.933 2.161 2.406 2.776 3.291 3.500 0.503 0.917 1.150 1.386 1.618 1.854 2.087 2.320 2.545 2.965 3.485 4.020 TYP TM Standard Gland opper ree luminum (<0.4%) lternative Gland lectroless rass, Stainless Seal SOLO LS Thermoplastic lastomer able Type orrugated & Interlocked Metal lad rmor or TK, continuously Welded Metal lad rmor rmor lamping arth ontinuity in ontact with Metal lad rmor Sealing Technique isplacement Seal Sealing rea(s) able Outer Jacket al ccessories Locknut, Shroud, ntry Thread See page J9 Seal, Serrated Washer, dapter/reducer L JKT MX. 0.354 0.510 0.910 1.161 1.402 1.579 1.858 2.079 2.327 2.622 2.992 3.700 0.550 1.035 1.268 1.504 1.736 2.008 5 2.441 2.677 3.126 3.830 4.220 NVLOP I. ROSS LTS RNRS. 1.18 1.42 1.61 1.96 2.16 2.36 2.78 2.96 3.14 3.35 4.33 5.25 5.28 1.31 1.57 1.79 2.18 2.40 2.62 3.06 3.28 3.49 3.71 4.80 5.82 5.84 NOMINL SSML. LNGTH 2.24 2.24 2.37 2.58 2.49 2.50 2.52 3.57 4.61 7.66 PV SHROU R. The standard is opper ree luminum (<0.4%), indicated by an at the end of the atalog Number. or other s change the to the indicated letters of the material options: Technical ata PV06 PV09 PV10 PV13 PV16 PV18 PV21 PV24 PV25 PV27 PV32 TLOG NUMR TM050S TM050 TM075 TM100 TM125 TM150 TM200S TM200 TM250S TM250 TM300 TM350 TM400 Insert SS- Stainless N- lectroless rass - lass I, Zone 1, x e II lass II, iv. 1 & 2, Groups, & G lass III, iv. 1 & 2 Types 3, 4, 4X; IP66 ertificate No. 1129339 MRIN PPROVLS Lloyds pproval No.: 01/00172 Gost K ert. No.: KZ7500052.05.01.00063 RoK pproval No.: 08-06/7693 NV pproval No.: -8119 S pproval No.: 01-L234401/1-P ontinuous Operating Temperature +130 (+266 ) Max. 60 ( 76 ) Min. TURS The TM cable gland is suitable for all types of interlocked, continuously welded or corrugated metal clad armor cable and types M, M-HL or TK armored and armored & jacketed cable. The cable gland provides mechanical retention and electrical continuity via the armor termination and an environmental seal on the cable outer jacket. The TM cable gland comes as standard in luminum, complete with O-Ring and Locknut. It allows for easy disconnection from equipment, for maintenance and change out. The gland utilizes a re-usable compression spring that provides grounding and gripping functions to the cable armor. The standard cable gland material is opper ree luminum (<0.4%), as pictured above. al materials are: Stainless or lectroless Nickel Plated rass. XPLOSION PROTTION by R. STHL 1-800-782-4357 J6
SSORIS PX2KX able Glands OR WT & HZROUS LOTIONS LSSIITIONS N- lass I, Zone 1, x d II lass I, iv. 1 & 2, Groups,, & lass II, iv. 1 & 2, Groups, & G Types 4X; IP66, IP67, IP68 NOT: or IP67 and IP68 requirements the cable diameter (minimum value) shown in table should be increased by 1.0 mm to ensure compliance. - lass I, Zone 1, x d II lass I, iv. 1 & 2, Groups,, & lass II, iv. 1 & 2, Groups, & G ile No. LW.201187 JR.256367 MRIN PPROVLS Lloyds pproval No.: 01/00172 Gost K ert. No.: KZ7500052.05.01.00063 RoK pproval No.: 08-06/7693 NV pproval No.: -8119 S pproval No.: 01-L234401/-P Ingress Prot. oc.: 5046 549G eluge Prot. ompliance: TS01 : 91 eluge Prot. oc.: 5046 549G- ontinuous Operating Temperature +130 (+266 ) Max. 60 ( 76 ) Min. TURS The PX2KX cable gland is suitable for use with armored and jacketed cable providing a compound barrier seal around the cable conductors and an environmental seal on the cable outer jacket. The cable gland provides mechanical cable retention and electrical continuity via the armor termination. detachable armor cone and nyway universal clamping ring arrangement allows for easy disconnect from equipment for maintenance and change out. The design also allows remote make off procedures when termination is required in confined spaces or in areas of restricted access. The standard cable gland material is rass with lectroless rass entry component as pictured above. al materials are: luminum or Stainless. Ordering Information (imensions in Inches) L GLN SIZ NPT 1-2- 2-3- THR LNGTH Technical ata TYP Standard Gland al Gland Sealing able Type MX. I. NO. OVR O NTR. ORS 0.496 15 0.496 15 0.496 15 0.689 29 0.689 29 0.929 51 1.181 80 1.441 122 1.614 149 1.886 205 2.114 259 2.354 320 2.531 364 2.965 500 OVRLL L MX. 0.240 0.374 0.492 0.551 0.717 0.933 1.098 1.386 1.795 2.150 2.323 2.626 3.000 0.453 0.626 0.823 0.866 1.031 1.335 1.839 2.091 2.339 2.594 2.839 3.091 3.559 PX2KX rass with lectroless ntry omponent luminum or Stainless SOLO LS Thermoplastic lastomer / poxy Resin arrier ompound rmored & Jacketed rmor lamping etachable ompound Tube / rmor one & nyway Universal lamping Ring Sealing Technique Unique LRS Outer Seal (Load Retention Seal) Sealing rea(s) Inner ompound arrier & able Outer Jacket al ccessories See page J9 Locknut, Shroud, ntry Thread Seal, Serrated Washer, dapter/reducer RMOR RNG MX. 63 NOM. ROSS PRO- PV TLOG LTS RNRS. TRUSION SHROU NUMR MX. MX. LNGTH R. 1.201 1.201 1.201 1.476 1.476 1.811 2.165 2.362 2.756 2.953 3.150 3.504 3.898 4.488 1.311 1.311 1.311 1.594 1.594 2.008 2.402 2.618 3.094 3.276 3.504 4.000 4.374 5.063 2.382 2.657 2.657 2.736 3.071 2.972 3.169 3.602 3.622 3.898 4.016 4.724 PV06 PV06 PV06 PV09 PV09 PV11 PV15 PV18 PV21 PV23 PV25 PV28 PV30 PV32 20S16PX2KX1R731 20SPX2KX1R731 20PX2KX1R731 25SPX2KX1R732 25PX2KX1R732 32PX2KX1R733 40PX2KX1R734 50SPX2KX1R735 50PX2KX1R736 63SPX2KX1R736 63PX2KX1R737 75SPX2KX1R737 75PX2KX1R738 90PX2KX1R739 The standard is rass with lectroless ntry component, indicated by a 7 in the atalog Number. or other s change the 7 to the indicated number of the material options: Insert 1 - luminum 4 - Stainless 5 - rass - ully lectroless J7 XPLOSION PROTTION by R. STHL 1-800-782-4357
PXSS2K able Glands SSORIS OR WT & HZROUS LOTIONS LSSIITIONS Ordering Information (imensions in Inches) L GLN SIZ NPT 1/2 " 1-2- 2-3- TYP Standard Gland al Gland Seal THR LNGTH Technical ata able Type Sealing Technique Sealing rea(s) al ccessories See page J9 MX. I. OVR NTR. 0.496 0.496 0.496 0.496 0.689 0.929 0.929 1.181 1.441 1.614 1.886 2.114 2.354 2.531 2.965 NO. O ORS 15 15 15 15 29 51 51 80 122 149 205 259 320 364 500 OVRLL L MX. 0.122 0.240 0.260 0.390 0.440 0.670 0.790 0.870 1.160 1.400 1.580 1.860 2.080 2.330 2.620 PXSS2K rass with lectroless ntry omponent lectroless rass, luminum or Stainless SOLO LS Thermoplastic lastomer / poxy Resin arrier ompound Non-rmored Marine & Tray able & xtra-hard Usage ord isplacement Seal Inner ompound arrier & able Outer Jacket Locknut, Shroud, ntry Thread Seal, Serrated Washer, dapter/reducer 0.343 0.470 0.530 0.780 1.030 1.079 1.260 1.500 1.730 1.960 0 2.440 2.670 3.120 ROSS LTS RNRS. MX. MX. 1.201 1.311 1.201 1.311 1.201 1.311 1.201 1.311 1.476 1.594 1.811 2.008 1.811 2.008 2.165 2.402 2.362 2.618 2.756 3.094 2.953 3.276 3.150 3.504 3.504 4.000 3.898 4.374 4.488 5.063 NOM. PRO- TRUSION LNGTH 2.382 2.382 2.657 2.736 2.736 3.071 2.972 3.169 3.602 3.622 3.898 4.016 4.724 PV SHROU R. PV04 PV04 PV05 PV05 PV09 PV10 PV10 PV13 PV15 PV18 PV21 PV23 PV24 PV26 PV31 The standard is rass with lectroless ntry component, indicated by a 7 in the atalog Number. or other s change the 7 to the indicated number of the material options: TLOG NUMR 20S16PXSS2K1R731 20SPXSS2K1R731 20PXSS2K1R731 20LPXSS2K1R731 25PXSS2K1R732 32PXSS2K1R733 32LPXSS2K1R733 40PXSS2K1R734 50SPXSS2K1R735 50PXSS2K1R736 63SPXSS2K1R736 63PXSS2K1R737 75SPXSS2K1R737 75PXSS2K1R738 90PXSS2K1R739 Insert 1 - luminum 4 - Stainless 5- rass - ully lectroless rass N- lass I, Zone 1, x d II, x e II lass I, iv. 2, Groups,, & lass II, iv. 2, Groups & G Types 4X; IP66, IP67, IP68 NOT: or IP67 and IP68 requirements the cable diameter (minimum value) shown in table should be increased by 1.0 mm to ensure compliance. - lass I, iv. 2, Groups,, & lass I, iv. 2, Groups & G x d II, x e II ile No. LW.201187, YMX.161256 & M.253914 MRIN PPROVLS Lloyds pproval No.: 01/00172 Gost K ert. No.: KZ7500052.05.01.00063 RoK pproval No.: 08-06/7693 NV pproval No.: -8119 S pproval No.: 01-L234401/1-P Ingress Prot. oc.: 5046 549J eluge Prot. ompliance: TS01 : 91 eluge Prot. oc.: 5046 549J- ontinuous Operating Temperature +100 (+212 ) Max. 60 ( 76 ) Min. TURS The PXSS2K cable gland is suitable for use with non-armored Marine and Tray able (Type T) and xtra-hard Usage ord, providing a compound barrier seal around the cable gland and an environmental seal on the cable outer jacket. The cable gland provides mechanical cable retention. combined detachable spacer and compound tube allows for easy disconnect from equipment for maintenance and change out etc. This feature also facilitates remote make off procedures when termination is required in confined spaces or in areas of restricted access. The standard cable gland material is rass with lectroless rass entry component as pictured above. al materials are: Nickel Plated rass, luminum or Stainless. XPLOSION PROTTION by R. STHL 1-800-782-4357 J8
SSORIS Locknuts, Sealing Washers & Serrated Washers OR WT & HZROUS LOTIONS Locknuts lectroless rass Locknuts are the recommended items for securing brass cable glands with nickel plated entry components. This prevents the electrolytic action of galvanic corrosion which can occur when dissimilar metals are coupled together. Ordering Information NPT THR 1-2- 3- THIKNSS. 0.19 4.75 0.19 4.75 0.18 4.50 0.19 4.75 0.20 5.10 0.20 5.10 0.39 1 0.39 1 0.45 11.5 ROSS LTS IMNSIONS 1.06 27.0 1.30 33.0 1.61 41.0 1.97 5 2.36 6 2.76 7 3.11 79.0 4.25 108.0 4.49 114.0 ROSS ORNRS 1.15 29.3 1.41 35.8 1.77 45.0 2.10 53.4 2.72 69.0 3.16 80.2 3.56 90.5 4.84 123.0 5.16 131.0 TLOG NUMR 050NPTLN5 075NPTLN5 100NPTLN5 125NPTLN5 150NPTLN5 200NPTLN5 250NPTLN5 300NPTLN5 350NPTLN5 Sealing Washers To maintain the Ingress Protection rating between the equipment and cable gland it is necessary to fit an ntry Thread Sealing washer at the gland entry interface. Ordering Information NPT R. 1-2- THIKNSS. 8 2.0 8 2.0 8 2.0 8 2.0 8 2.0 8 2.0 8 2.0 8 2.0 XTRNL 1.13 28.6 1.38 35.0 1.75 44.5 2.00 50.8 2.56 65.0 3.00 76.2 3.74 95.0 4.33 11 TLOG NUMR 050NPTTS 075NPTTS 100NPTTS 125NPTTS 150NPTTS 200NPTTS 250NPTTS 300NPTTS Serrated Washers These stainless steel serrated washers fitted internally to the equipment, before the application of a locknut prevent the locknuts from loosening in service. Ordering Information NPT R. 1-2- 3- THIKNSS. 0.15 3.7 0.15 3.7 0.15 3.7 0.15 3.7 0.15 3.7 0.18 4.5 0.20 5.0 0.20 5.0 0.25 6.3 OUTR 1.26 32.0 1.57 4 1.73 44.0 2.32 59.0 3.15 8 3.94 10 4.41 112.0 4.72 12 5.91 15 TLOG NUMR 050NPTSW4 075NPTSW4 100NPTSW4 125NPTSW4 150NPTSW4 200NPTSW4 250NPTSW4 300NPTSW4 350NPTSW4 J9 XPLOSION PROTTION by R. STHL 1-800-782-4357