FEATURES EXCELLENT ANTI-SURGE & ANTI-SULFUR CHARACTERISTICS AEC-Q200 QUALIFIED RATED POWER UPGRADE IN SMALLER PACKAGE SIZE AVAILABLE IN ± TOLERANCE BOTH FLOW SOLDER AND REFLOW SOLDERING ARE APPLICABLE SPECIFICATIONS NRCPS06 0603 NRCPS0 0805 NRCPS2 206 NRCPS25 20 Power Rating at 70 C /4W (0.25W) /3W (0.33W) /2W (0.50W) 3/4W (0.75W) Max. * Working Voltage Max. *2 Overload Voltage 50 200 Tolerance Code Note * - Maximum allowable continuous Working Voltage for all resistors is the lower of the two values: Maximum Working Voltage as specified above (or) Power rating (Watts) x (Ohms) Temperature Coefficient (ppm/ C) Note *2 - Maximum allowable Overload voltage is 2.5 times the Maximum Working Voltage (see Note * above) or Maximum Overload Voltage as specified in the table whichever is lower Range (Ω) ±200ppm.0 ~ 9. ±200ppm.0 ~ 9. ±200ppm.0 ~ 9. ±200ppm.0 ~ 9. RoHS Compliant includes all homogeneous materials *See Part Number System for Details Value Operating Temperature Range -55 C ~ +55 C PART NUMBER SYSTEM ( VALUES) NRCPS 06 J 04 TR Q Y F RoHS Compliant Q = AEC-Q200 qualified Tape & Reel Packaging Code: First 2 figures are significant, 3rd digit is the multiplier, R indicates a decimal point. Tolerance Code: J=5% : 06=0603, 0=0805, 2=206, 25=20 Series "Y" denotes suitable for automotive equipment, sourced to special production and inspection at TS-6949 certified production site PART NUMBER SYSTEM (E-96 VALUES) NRCPS 06 F 5 TR Q Y F RoHS compliant Q = AEC Q-200 Qualified Tape & Reel Packaging Code: First 3 figures are significant, 4th digit is the multiplier, R indicates a decimal point. Tolerance Code: D=0.5%, F=% : 06=0603, 0=0805, 2=206, 25=20 Series "Y" denotes suitable for automotive equipment, sourced to special production and inspection at TS-6949 certified production site
COMPONENT DIMENSIONS (mm) L W H P P2 NRCPS06 0603.60 ± 0.0 0.80 +0.5/-0.05 0.45 ± 0.0 0.30 ± 0.0 0.25 ± 0.0 NRCPS0 0805 2.00 ± 0.0.25 ± 0.0 0.55 ± 0.0 0.40 ± 0.20 0.30 ± 0.20 NRCPS2 206 3.0 ± 0.0.60 ± 0.5 0.55 ± 0.0 0.50 ± 0.25 0.40 ± 0.25 NRCPS25 20 3.0 ± 0.5 2.50 ± 0.5 0.55 ± 0.0 0.50 ± 0.25 0.40 ± 0.25 COMPONENT MARKING EXAMPLES (0805, 206 & 20 s) No Marking on 0603 E-96 Values % AND 5% TOLERANCE VALUES 0.5% & % TOLERANCE E-96 VALUES Value: 0KW AND E-96 STANDARD VALUES E-96 00 00 02 05 07 0 0 3 5 8 20 2 24 27 30 30 33 37 40 43 50 47 50 54 58 60 62 65 69 74 80 78 82 87 9 200 96 200 205 20 220 25 22 226 232 240 237 243 249 255 270 26 267 274 280 300 287 294 30 309 330 36 324 332 340 360 348 357 365 374 390 383 392 402 42 430 422 432 442 453 470 464 475 487 499 50 5 523 536 549 560 562 576 590 604 620 69 634 649 665 680 68 698 75 732 750 750 768 787 806 820 825 845 866 887 90 909 93 953 976 Value: 562KW 03 5623 0603, 0805, 206 & 20 s 0805, 206 & 20 s 2
CONSTRUCTION No. Item Main Material Substrate Alumina 2 Resistor Thick Film RuO2 3 Protective Coating Glass 4 Protective Coating Resin 5 Bottom Terminal Thick Film Ag 6 Upper Terminal Thick Film Ag-Pd 7 Upper Terminal 2 Thick Film Ag 8 Side Terminal Thin Film NiCr 9 Terminal Plating st (Ni) 0 Terminal Plating 2nd (00% Sn) 8 7 6 2 3 4 9 0 5 3.0 Hydrogen Sulphide Test Test Conditions: H2S: 0ppm, 60 C, 90% RH 2.0 DR/R (%).0 0.0 -.0 250h 500h 000h 000 Single Pulse Power Characteristics NRCPS vs. NRC Series NRCPS25 NRC25 NRCPS2 NRC2 One Pulse Power (W) 00 0 NRCPS0 NRCPS06 NRC0 NRC06 0 00 000 Pulse Duration (ms) 3
PERFORMANCE CHARACTERISTICS Test Items High temperature exposure (storage) AEC-Q200 - No. 3 Temperature Cycling AEC-Q200 - No. 4 Humidity Load Life AEC-Q200 - No. 7 Requirement DR = ± ([ ] +0.05W) Test Method (AEC-Q200 REV. D) [.0%] 55 C,000 hours (no load) 00 times at -55 C 30 minutes/+25 C 30 minutes [%] +85 C, 85% RH @ 0% of rated power applied continuously for,000 hours Load Life AEC-Q200 - No. 8 [%] Voltage to achieve 35% of rated power or 50V whichever is less applied continuously for,000 hours @ 25 C Physical Dimensions AEC-Q200 - No. 0 JESD22 Method JB-00 As in table "DIMENSIONS (mm)" on page 2 to solvents AEC-Q200 - No. 2 No visible damage to marking and coating Solvent: 2-propanol @ 25 C 3 cycles of immersion for 3 minutes & brushed 0 times Mechanical Shock AEC-Q200 - No. 3 Vibration AEC-Q200 - No. 4 to Soldering Heat AEC-Q200 - No. 5 Waveform: alf sine, peak value 00G Normal duration 6ms, Condition: X, Y, Z 0 times in each direction Peak acceleration: 5g's for 20 minutes Frequency: 0Hz ~ 2,000Hz 2 cycles in each of 3 orientations Immersion into solder bath at 260 C for 0 seconds ESD AEC-Q200 - No. 7 Solderabiilty AEC-Q200 - No. 8 PCB Flexing AEC-Q200 - No. 2 Adhesion AEC-Q200 - No. 22 [.0%] Terminal surface shall be immersed, minimum of 95% coverage with new solder Human Body Model, 2K ohm resistor, 50pF capacitor Test voltage: 0603-2KV, 0805, 206 & 20-3KV J-STD-002 a) Method B, 4 hours @ +55 C dry heat. @+235 C for 5 secs. Sn96.5-Ag3-Cu0.5 b) Method B @ +25 C for 5 secs, category 3, Sn63Pb37 c) Method D, category 3 @ +260 C for 7 secs. AEC-Q200-005 Bending to 2mm for 60 seconds AEC-Q200-006 Pressurized force: 0603-0N, 0805, 206 & 20-7.7N Duration: 60 secs ± sec. 300 C 260 C 230 C 200 C 50 C 00 C 50 C REFLOW SOLDERING TEMPERATURE PROFILE Peak Temperature 50 C ~ 80 C 20 sec. max. Time above 230 C 30 sec. max. 260 C 0 sec. max. CLIMATE CATEGORY (IEC 60068): 55/55/56 Lower category temperature: -55 C Upper category temperature: +55 C Duration of damp heat, steady state: 56 days LAND PATTERN DIMENSIONS (mm) a b c 0603 Flow.0 0.5 0.8 Reflow.0 0.8 0.8 0805 Flow.3 0.7.25 Reflow.3 0.9.25 206 Flow 2.2 0.85.6 Reflow 2.2.05.6 20 Flow 2.2 0.85 2.5 Reflow 2.2.05 2.5 0 C Note: Maximum of 2 times RECOMMENDED FLOW SOLDERING CONDITIONS Pb-free Solder: Sn3.0 - Ag0.5 - Cu Preheat: 0 C ~ 30 C for 60 ~ 20 seconds Peak Temperature: 245 C ~ 250 C for 3 ~ 5 seconds a b c 4
PAPER CARRIER TAPE DIMENSIONS (mm) NRCPS06 0603.5 ± 0.5.90 ± 0.20 NRCPS0 0805.65 ± 0.5 2.50 ± 0.20 NRCPS2 206 2.00 ± 0.5 3.60 ± 0.20 A B D E F P o T W.5 +0./-0.75 ± 0. 3.5 ± 0.05 4.0 ± 0. 4.0 ± 0. 0.80 max..00 max 8.0 ± 0.2 P 0 D E Cover tape F W B T A PLASTIC CARRIER TAPE DIMENSIONS (mm) A B D E F P o T T2 W NRCPS25 20 2.85 ± 0.20 3.50 ± 0.20.5 +0./-0.75 ± 0.0 3.5 ± 0.05 4.0 ± 0. 4.0 ± 0. 0.3 max..00 ± 0.20 8.0 ± 0.3 T P 0 D E Cover tape F W B A T 2 REEL DIMENSIONS AND QUANTITY f60 +.0/-0 f80 +0/-.5 f3 ±0.2 L Quantity NRCPS06 0603 5,000 NRCPS0 0805 5,000 9.0 +.0/0 NRCPS2 206 5,000 NRCPS25 20 4,000 L 5