MANUFACTURING HEAVY EQUIPEMENTS R.C.DAS ENGINEERING Engineering Excellence
PRODUCTS CLINKER HAMMER CRUSHER Clinker is a Lump or Nodules (usually 3-25mm diameter) which is produced by sintering Limestone and Alumino Silicate during cement kiln stage. Clinker crusher is designed to break the large material into smaller particle size. We are supplying Clinker Hammer Crusher Assembly for the following customers. Cement Industry
CLASSIFIER IN CEMENT PLANTS Coal plays an important role in the manufacturing process of cement. The main fuel used for firing preheater cyclone and rotary kiln is coal. Coal fineness has a direct relationship with its reactivity. Hence in the cement plant a special significance has been given to the milling behavior of coal. It has been observed that low volatile matter in coal can be compensated by finer grinding. We are supplying classifier for the following customers.
ROTARY CLASSIFIER IN POWER PLANT Coal continues to play a predominant role in the production of electricity in the world. Coal Pulverizer is one of the critical power plant component that is relied upon to convert the energy stored in coal into electricity. The Classifier located on top of the mill returns the over size material back to the pulverizer but allows the proper sized material to pass out of the mill to the burners. Classifier are critical in providing the desired quality of pulverized coal with the desired fineness. We are supplying Dynamic Classifier for M/S L&T MHI Boilers Pvt Ltd. MHI Power Plants
ATOX MILL ROLLER ASSEMBLY We are supplying Atox Mill Roller Assembly to M/S F.L.Smidth India Pvt. Ltd, Chennai for their Atox Raw Mill. The function of Atox Raw Mill uses pressure and shear generated between the rollers and the rotating table to crush and grind raw materials. We have received letter of appreciation from M/S F.L.Smidth India Pvt. Ltd, Chennai for manufacturing and development of atox mill roller assemby first time in India.
KILN SUPPORT ROLLER BEARING ASSEMBLY KILN Support Roller Bearing is the critical equipment in rotary KILN. The Support Roller Bearing of the Rollers must be carefully protected by heat of the KILN and ingress of dust. we are supplying KILN Support Roller Bearing to M/S F.L.Smidth India Pvt. Ltd, Chennai and M/S F.L Smidth A/S, Denmark.
OTHER PRODUCTS FAN SHAFT MEMBRANE COUPLING SUGAR ROLLER SHAFT ROLL CRUSHER SHAFT SHIP UNLOADER HOLD ROPE DRUM FLEXIBLE CONNECTION
QUALITY POLICY R.C.DAS ENGINEERING PRIVATE LTD., is an ISO 9001:2008 certified company and our commitment towards quality is well demonstrated by the numerous quality audits. We ensure quality work starting from material entry point up to the dispatch. The resources available with us will make a revolution in the Heavy Equipments Manufacturing Industry. The procedures being followed by us will be meeting the national and international codes and regulations. We will produce quality products and delivery in time to the customers. R.C. DAS ENGINEERING PRIVATE LTD., is committed in providing the best of service to its customers. Apart from ensuring on-time delivery of goods inline with stringent quality, high engineering standards and safety for all. We also strive to provide the highest quality of customer support to our customers. With strong commitment towards customer satisfaction, we exercise quality and technology at the core to achieve it since the beginning. We act as a solution provider for the demands of today s applications and needs. Our company is well prepared with the modern equipments and assessment facilities to ensure quality at each stage of development. R.C. DAS ENGINEERING has established fully functional six separate units to provide round the clock service to Customers.
CUSTOMERS MHI Cement Industry Windmills Power Plants Sugar Plants Heavy Engineering Various Other Industries
INFRASTRUCTURE AND UNITS Our machine shop is equipped with world class international heavy duty machines. Our infrastructure includes German made Horizontal Boring Machine, VTL, Radial Drilling and 25 tons of cranes for material handling. Our infrastructure is catered to meet the needs of heavy engineering industries like Cement, Sugar, Power and many more processing industries. R. C. DAS ENGINEERING: UNIT I Started in the year 1993, has a connected load of 150hp and 40 KVA equipped with Heavy Lathe Machineries and Slotting Machine. R. C. DAS ENGINEERING: UNIT II Started in the year 2000, has a connected load of 150hp and 40kva equipped with Heavy Lathe machineries and Boring machines. GANESAN HEAVY INDUSTRIES Started in the year 1996, has a connected 50hp and 20kva equipped with Small Lathe machineries and fabrication machineries. R. C. DAS ENGINEERING: UNIT III Started in the year 2006, has a connected load of 150hp and 40kva equipped with 5m CNC VTL and CNC Floor Boring machine. R. C. DAS ENGINEERING: UNIT IV Started in the year 2007, has a connected load of 50kva equipped with fabrication machineries. GEE VEE ENGINEERING Started in the year 2008, has a connected load of 70hp and 30Kva equipped with Balancing Machine and 3m/2m/1.4m CNC VTL.
MACHINERIES CNC VTL MACHINE 5m diameter, height 3500mm. 3m diameter, height 2500mm. 2m diameter, height 1200mm. 1.4m diameter, height 1000mm. Control FANUC. LATHES Lathe - 20 Nos. Range - Diameter upto 2000mm. Length - upto 12m. CNC FLOOR BORING MACHINE Spindle diameter - 180mm. X - 8000mm. Y - 3500mm. Z - 900mm. HORIZONTAL BORING MACHINES Spindle diameter - 110mm, make: WMW, Germany. Spindle diameter - 75mm, make: Kearns-Richards, England MILLING MACHINES Stroke - 1000mm, make: Rocford, USA. SLOTTING MACHINES Table Size - 2500mm X 710mm, make: Cincanatti, USA. ` MEASURING INSTRUMENTS We are equipped with: Outside Micrometer upto 1600mm. Vernier upto 2000mm. Digital Surface finish tester. BALANCING SERVICES Computerized balancing machine enable to balance a wide range of equipments from small electric motor to large industrial fans, rotor and rolls. The machine having a variety of pedestal configuration to cater for a wide range of jobs. This machine is manufactured to ISO 1940 requirements and capable of producing balancing certificates stating the original imbalance, the correction required and the final balance specification achieved. Make: abro Model: h-16k and H-100 Electronics: crt based type mp-102 From 25kgs to 25 tons on journals 4000 mm maximum diameter 8000 mm maximum length 16 mm to 400 mm journal diameter Belt drive arrangement with variable frequency speed drive
ADVANCED ENGINEERING FOR BETTER FUTURE The machine shop is equipped with an array of large and extra large machines to machine a single piece weighing more than 30 tons. The company has good reputation and more number of serving experience to manufacture heavy equipments for cement, sugar, wind power and other process industries. WHO WE ARE R. C. DAS ENGINEERING PRIVATE LTD., is an ISO 9001:2008 certified company having a heavy engineering and manufacturing facility incorporated in 1993. We have fast progressed to become one of the country's largest machining facility. WHAT WE DO We are manufacturing various equipments and machineries for the OEM of cement, power & material handling and other heavy engineering Industries. We are manufacturing the equipments as per OEM S design and quality norms. CONTACT US R.C.Das Engineering Pvt Ltd. S.P-61 & S.P-70, Ambattur Industrial Estate, Chennai - 600058, Tamil Nadu, India. Phone : +91-44-26257067, +91-44-26246282 Mobile : +91-9841049004 Fax : +91-44-26249004 Email : venu_g@vsnl.net, md@rcdas.in Website :