Your Source for a Complete Line of Electric Motors Rolled Steel Motors A Complete Line of Single Phase and Three Phase Rolled Steel Motors
Mission Statement To provide the United States market for industrial motors and controls with products which meet or exceed customer expectations for quality, performance, and reliability at the lowest possible cost and delivered in accordance with the customer s schedule, through our authorized distributor network. Company History North American Electric, Inc. is a wholesale supplier of Special Purpose and General Purpose, AC electric motors and controls. We take pride in supplying high performance, high quality products at extremely competitive prices throughout the United States. Donald E. Hackman, Sr. and David E. Hackman founded the company in October of 1993. The company s primary focus is sourcing quality electric motors from various manufacturers, both locally and internationally, and distributing them throughout the United States through local distributors and service centers. Our nationwide distributor and service network offer strong local support for our products by providing critical logistical, technical and maintenance support as well as fast, friendly customer service. WARRANTY POLICY All motors sold by North American Electric, Inc. are warranted to be free from defects in material and workmanship. The warranty is 24 months from the date of manufacture but no less than 18 months from date of invoice. Also, all motors installed within 24 months from date of manufacture will be warranted for no less than 12 months from the date the motor is installed. North American Electric, Inc. shall, at its option and expense, either repair or replace any such motor or part, which is defective within the warranty period. To be covered under warranty, any motor must have at all times been operated or used under normal operating conditions for which the motor was designed. In the event of warranty claims, North American Electric, Inc. must be notified promptly following any motor failure. The motor should be sent to a North American Electric, Inc. authorized service center to diagnose the cause of failure. After this examination, a determination will be made if the failure was due to defective material and/or workmanship. If the failure was due to defective material and/or workmanship, North American Electric, Inc. will replace or repair the motor. North American Electric s liability under this warranty or any other warranty whether expressed or implied in law or fact shall be limited to the repair or replacement of defective material and workmanship, and in no event shall North American Electric, Inc. be liable for consequential or indirect damages, including freight.
YOUR SOURCE FOR A COMPLETE LINE OF ELECTRIC MOTORS!!! SINGLE PHASE, 56C FRAME, TEFC 1/3 2 HP 2,4 POLE HIGH STARTING TORQUES MANUAL OVERLOAD PROTECTION (OPTIONAL) CAPACITOR START / CAPACITOR RUN DESIGN ROLLED STEEL FRAME CONSTRUCTION IP55 PROTECTION-REMOVABLE FEET SINGLE PHASE, FARM DUTY, TEFC 1/3 10 HP 4 POLE HIGH STARTING TORQUES MANUAL OVERLOAD PROTECTION (1/3 THRU 5 HP) CAPACITOR START / CAPACITOR RUN DESIGN ROLLED STEEL FRAMES CAST IRON ENDBELLS SINGLE PHASE OPEN DRIPPROOF 3,5 HP 4 POLE HIGH STARTING TORQUES CAPACITOR START / CAPACITOR RUN DESIGN ROLLED STEEL FRAME CONSTRUCTION CAST IRON ENDBELLS THREE PHASE, 56C FRAME, TEFC 1/3 3 HP 2,4 POLE HIGH EFFICIENCY DESIGN GENERAL PURPOSE MOTORS ROLLED STEEL FRAME CONSTRUCTION, ALUMINUM ENDBELLS IP55 PROTECTION REMOVABLE FEET THREE PHASE, TEFC ROLLED STEEL MOTORS PREMIUM EFFICIENCY DESIGN-GENERAL PURPOSE, LIGHT WEIGHT ROLLED STEEL FRAME THREE PHASE OPEN DRIPPROOF 1 15 HP 2,4 POLE PREMIUM EFFICIENCY DESIGN GENERAL PURPOSE MOTORS ROLLED STEEL FRAME CONSTRUCTION, CAST IRON ENDBELLS STAINLESS STEEL WASHDOWN DUTY MOTORS 1/3 HP - 20HP 2,4,6 POLE IP 67 PROTECTION INVERTER DUTY NEMA PREMIUM EFFICIENCY INVERTER DUTY MOTORS MEETS OR EXCEEDS NEMA PREMIUM EFFICIENCY LEVELS QUALIFIES FOR ENERGY EFFICIENCY REBATES PREMIUM CRUSHER DESIGN MOTORS 1 500 HP 4,6,8 POLE NEMA DESIGN C HIGH STRENGTH 4140 GRADE STAINLESS STEEL SHAFT 586/7U FRAME HEAVY DUTY CAST IRON CONSTRUCTION (INCLUDING FAN COVER) BEARING SIZES: DE=NU324 ODE=6324 PREMIUM EFFICIENCY EXPLOSION PROOF MOTORS 1 300 HP 2,4,6 POLE ALL MOTORS MEET OR EXCEED UL 674 SPECIFICATION AS REQUIRED BY OSHA FOR INSTALLATION AND USE IN HAZARDOUS LOCATIONS. CLASS I, DIVISION I, GROUPS C&D AND CLASS II, DIVISION I, GROUPS E,F AND G UL CERTIFIED - FILE E228654 CSA + C + US - CANADIAN STANDARD ISO9001 OIL WELL PUMP MOTORS, TEFC 3 150 HP 6 POLE NEMA DESIGN D HIGH SLIP(5% TO 8% SLIP) SPECIAL PURPOSE OIL WELL PUMP MOTORS HEAVY DUTY CAST IRON FRAME CONSTRUCTION PREMIUM EFFICIENCY ALUMINUM MOTORS 1 10 HP 2,4 POLE HIGH EFFICIENCY DESIGN GENERAL PURPOSE, THREE PHASE, TEFC MOTORS LIGHT WEIGHT ALUMINUM FRAME VERTICAL HOLLOW SHAFT PUMP MOTORS 10 HP 250 HP, 4 POLE HIGH TORQUE - HIGH THRUST ELECTRIC MOTOR CONTROL FULL VOLTAGE STARTERS SOFT STARTS INVERTERS PUMP PACKAGES MOTOR SLIDE BASES AVAILABLE 56C THRU 505U 1
SINGLE PHASE, TEFC, 56C FRAME Buy on Value Not on Price 1/3-2 Horse Power 1800 and 3600 RPM C-Flange with Removable Feet IP55 Protection High Starting Torque Heavy (9) Gauge Rolled Steel Construction NEMA Design B Totally Enclosed Fan Cooled Protection Class F Insulation System with Class H VPI Epoxy Resin Protection Internal Oil Seal on Drive End C-Flange with Removable Feet Double Punched Foot Design APPLICATIONS: General Purpose Use on Pumps, Fans, Blowers, Compressors, Conveyors, Farm Equipment and Other Industrial Commercial Machinery Installed in Damp, Dusty or Dirty Environments. IP55 as Standard. Suitable for Indoor and Outdoor Applications. These Motors have High Starting Torques and are Well Suited for Applications with High Starting Loads. 2
SINGLE PHASE, 56C FRAME LIST PRICING Note: Also available with Manual Overload Protection. Please see Farm Duty Motors on Page 5. TECHNICAL DATA *Refer to page 17 for mounting dimensions 3
FARM DUTY MOTORS Buy on Value Not on Price 1/3-10 Horse Power 1800 RPM Manual Overload Protection through 5HP IP55 Protection High Starting Torques Heavy (9) Gauge Rolled Steel Construction NEMA Design B Manual Overload Protection Through 5 HP Class F Insulation System with Class H VPI Epoxy Resin Protection Totally Enclosed Fan Cooled (TEFC) Protection Internal Oil Seal on Drive End Double Punched Foot Design C-Flange Kit Available APPLICATIONS: General Purpose Use on Pumps, Fans, Conveyors, Poultry Equipment, Air Compressors and Other Farm Duty Machinery Requiring High Starting Torques. 4
FARM DUTY MOTORS LIST PRICING C FLANGE LIST PRICING TECHNICAL DATA *Refer to pages 17 & 18 for mounting dimensions 5
SINGLE PHASE OPEN DRIPPROOF Buy on Value Not on Price 3-5 Horse Power 1800 RPM Compressor Duty High Starting Torques High Efficiency Design NEMA Design B Heavy (9) Gauge Rolled Steel Construction Sealed Bearings Open Dripproof IP23 Protection Oversized Bearing Used on Both Drive End and Opposite Drive End Double Punched Foot Design Class F Insulation System with Class H VPI Epoxy Resin Protection APPLICATIONS: General Purpose Use on Pumps, Fans, Conveyors, Blowers, Air Compressors, Refrigeration Equipment, Industrial Equipment, Milling Machines, Tools, Farm Equipment, Aeration Equipment and Other General Purpose Applications Where Contaminants are Minimal. These Motors have Extremely High Starting Torques for use on Applications with High Starting Loads. 6
SINGLE PHASE OPEN DRIPPROOF MOTORS LIST PRICING C FLANGE LIST PRICING 180T 3180-SODP $65 12 TECHNICAL DATA *Refer to page 19 for mounting dimensions 7 7
THREE PHASE, TEFC, 56C FRAME Buy on Value Not on Price 1/3-3 Horse Power 1800 and 3600 RPM C-Flange with Removable Feet IP55 Protection Inverter Rated 10:1VT; 5:CT High Starting Torque Heavy (9) Gauge Rolled Steel Construction NEMA Design B Totally Enclosed Fan Cooled (TEFC) Protection Class F Insulation Systems with Class H VPI Epoxy Resin Internal Oil Seal on Drive End C-Flange with Removable Feet Double Punched Foot Design APPLICATIONS: General Purpose Use on Pumps, Fans, Blowers, Compressors, Farm Equipment and Other Industrial and Commercial Machinery Installed in Damp, Dusty or Dirty Environments. IP55 Protection as Standard. Suitable for Indoor and Outdoor Applications. Additionally, These Motors do Utilize Phase Insulation Materials That are Suitable for use with Variable Frequency Drives. 8
THREE PHASE, TEFC, 56C FRAME LIST PRICING TECHNICAL DATA *Refer to page 20 for mounting dimensions 9
THREE PHASE, TEFC, INTEGRAL HORSE POWER Buy on Value Not on Price 1-10 Horse Power 1800 and 3600 RPM Inverter Rated IP55 Protection Inverter Rated 10:1 Variable Torque 5:1 Constant Torque High Starting Torque Heavy (9) Gauge Rolled Steel Construction NEMA Design B Class F Insulation Systems with Class H VPI Epoxy Resin. Totally Enclosed Fan Cooled (TEFC) Protection Internal Oil Seal on Drive End Double Punched Foot Design C-Flange Kits Available APPLICATIONS: General Purpose Use on Pumps, Fans, Blowers, Compressors, Conveyors, Material Handling and Other Industrial Machinery Installed in Damp, Dusty or Dirty Environments. Additionally, These Motors are Suitable for use with Variable Frequency Drives. 10
THREE PHASE, TEFC, INTEGRAL HORSEPOWER LIST PRICING C FLANGE LIST PRICING 140T 180T 210T 3140-RSTE 3180-RSTE 3210-RSTE $34 $65 $69 10 12 15 TECHNICAL DATA HP Full load Frame Service DE ODE LRA Full load FLT Ft-Lb LRT % BDT % Full Load % Full Load % Weight RPM Factor Bearing Bearing At 460V At 460V Efficiency Power Factor *Refer to page 20 for mounting dimensions 11
THREE PHASE, OPEN DRIPPROOF MOTORS Buy on Value Not on Price 1-15 Horse Power 1800 and 3600 RPM Inverter Rated AC Inverter Rated 10:1 Variable Torque 5:1 Constant Torque High Efficiency Design High Starting Torques NEMA Design B Sealed Bearings Heavy (9) Gauge Rolled Steel Construction Open Dripproof IP23 Protection Oversized Bearings Used on Both Drive End and Opposite Drive End Class F Insulation System with Class H VPI Epoxy Resin Double Punched Foot Design APPLICATIONS: General Purpose Use on Pumps, Fans, Blowers, Compressors, Material Handling and Other General Purpose Applications Where Contaminants are Minimal. 12
THREE PHASE, OPEN DRIPPROOF LIST PRICING TECHNICAL DATA HP Full load Frame Service DE ODE LRA Full load FLT Ft-Lb LRT % BDT % Full Load % Full Load % Weight RPM Factor Bearing Bearing At 460V At 460V Efficiency Power Factor *Refer to page 21 for mounting dimensions 13
MOTOR SLIDE BASES FEATURES: Bases are provided with washers Primed with Oven-Baked Primer for easy painting All D bolts (or Motor mounting bolts) are welded into position to prevent spinning and dropping from the slots All D bolts are fixed to the exact foot pattern of the motor to aid in easier motor installation All sizes are double-adjusting screw type 14
MOTOR SLIDE BASE DIMENSIONS 56 286T 15
MOTOR SLIDE BASE DIMENSIONS 324T 505U FRAME 16
Single Phase TEFC Foot Mount 56 Frame 145T Frame Single Phase TEFC C-Flange Mount 56C 145TC Frame 17
Single Phase TEFC Foot Mount 182T 215T Frame Single Phase TEFC C-Flange Mount 182TC 215TC Frame 18
Single Phase Open Dripproof 182T 184T Frame C-Flange Single Phase Open Dripproof 182TC 184TC Frame 19
Three Phase TEFC 56 215T Frame C-Flange Three Phase TEFC 56C 215TC Frame 20
Three Phase Open Dripproof 143T 215T Frame C-Flange Three Phase Open Dripproof 143C 215TC Frame 21
Data subject to change without notice Distributed by: North American Electric, Inc. P.O. Drawer 130 350 Vaiden Drive Hernando, MS 38632 Toll Free: 800-884-0404 Phone: 662-429-8049 Fax: 662-429-8546 Sales: 800-884-0405 www.naemotors.com e-mail: sales@naemotors.com Revised April 2011