SW-600H-600NH-80 PNEL SWTCHES DSTNCTVE FETURES Robust mechanism High current/voltage rating nsulated or metal lever UL, CS and NF-VDE (EN 6058-) approved ELECTRCL SPECFCTS Max. current/voltage ratings : see tables below Peak current : 30 max. during / sine, 50 VC nitial contact resistance : 0 mω max. nsulation resistance :,000 MΩ min. at 500 VDC Dielectric strength :,000 Vrms 50 Hz min. between terminals,500 Vrms 50 Hz min. between terminals and frame Electrical life : 0,000 cycles at full load PPROVED RTNGS 600H - 600NH Models Single and double pole Three pole Functions - OFF () - (6) Other (4-5-7-8-9) - OFF () & - (6) Other (4-5-7-8-9) UL CS NF-VDE UL 054 CS - EN 6058-5 / HP 5-50 VC 0(4) 400 VC 0 / HP 5-50 VC T 85/55 (600H) 5 / HP 5-50 VC 0 / HP 5-50 VC T 5/55 (600NH) FOR NFORMT Max. current/voltage rating w. resistive load Functions Ratings Electrical life - OFF - OFF Other 5 50 VC 0 4 VDC 5 VDC 5 50 VC 5 4 VDC 5 5 VC 50 VC 5 4 VDC 0,000 cycles 6,000 cycles 0,000 cycles 0,000 cycles The company reserves the right to change specifications without notice.
PNEL SWTCHES GENERL SPECFCTS TERMNLS Torque :.50 Nm (.0 Ft.lb) max. applied to nut Panel thickness : 4.5 mm (.77) max. between nuts Operating temperature : -0 C to +55 C (-4 F to +3 F) MTERLS 600H/ & 600NH/ 600H & 600NH Case : polyester UL94-V0 ctuator : - 600H : brass, nickel plated - 600NH : black polyamide Bushing : brass, nickel plated Contacts : silver/nickel alloy PEM products may be recycled at end-of-life for the re-claiming of valuable metal components. ELECTRCL FUNCTS GENCY PPROVLS EN 6058- EN 6058- PNEL CUT-OUT vailability : see chart on previous page. Marking : approved models are standard marked.
PNEL SWTCHES BULD YOUR PRT NUMBER BSC PRT NUMBER 6 SERES NUMBER OF POLES ELECTRCL FUNCTS CTUTOR ND TERMNLS MOMENTRY 3 Single pole 4 Double pole 5 Three pole For 4 pole, see 660 series. - OFF 5 MOM - 6-7 MOM OFF MOM 8 OFF MOM H H/ H/3 NH Metal lever, screw terminals Metal lever, solder lug/quickconnect terminals * Metal lever, normalized quick-connect terminals nsulated lever, screw terminals -R MOM -R MOM MOM 9 OFF 4 MOM MOM MOM NH/ NH/3 nsulated lever, solder lug/ quick-connect terminals nsulated lever, normalized quick-connect terminals * Must not have blank in "momentary" box. * On request. OPTS FOR 600H SERES LY OPTS LOCKNG LEVERS CTUTOR OPTS For models with metal lever only -V locked position -4 30 mm (.8) long actuator T Tropicalized case -V locked positions -5 40 mm (.574) long actuator K Front panel sealing -3V 3 locked positions -6 Retro style actuator L Bushing 6 mm (.69) LUXE Chrome finish X595 Ergonomic flat plastic actuator TKLUXE G GK Front panel sealing + T and LUXE Black finish Black finish + front panel sealing G-038 Black finish + uminous tip on lever BOUT THS SERES On the following pages, you will find successively basic part numbers of switches and options in the same order as in above chart. Notice : please note that not all combinations of above numbers are available. Refer to following pages for further information. Switch guards are available to prevent inadvertent lever operation. See "Switch Guards" section on website. Sealing boots are available on 600H series to protect the switches against dust and water. See "Sealing Boots" section of website. Mounting accessories : standard hardware supplied with all models : - 600H and series : hex nut U66 and knurled nut U4-600NH series : hex nut U66 and knurled nut U5 3
PNEL SWTCHES METL LEVER - SNGLE POLE = ngle of throw 63H/ 63H 30 - OFF 635H/ 635H 6 MOM - 636H/ 636H 30-637H/ 637H 30 MOM OFF MOM 638H/ 638H 36 OFF MOM 639H/ 639H 36 OFF 9.50 (.6) 3 4.00 7.50 0.50 5.00.00 (.55) (.689) (.43) (.59) (.433) ngle of throw with K sealing option : functions, 5, 6, 7 : 6 - functions 8, 9 : 3 Ø.00x0.75 S (.47Dx0.75 S) 0.80 (.03) 7.0 4.90 (.79) (.586) METL LEVER - DOUBLE POLE 64H/ 64H 6 - OFF 644H/ 644H* 33 644H/R 644H-R* 33 MOM 644H/-R 644H-R* 33 MOM MOM 645H/ 645H 6 MOM - 646H/ 646H 6-647H/ 647H 6 MOM OFF MOM 648H/ 648H 6 OFF MOM 649H/ 649H 3 OFF 9.70 (.69) 3.50 7.50 0.50.40.00 (.846) (.689) (.43) (.846) (.433).00 (.433) B4 B5 B6 Ø.00x0.75 S (.47Dx0.75 S) 0.80 (.03) 4.65 (.578) 6.80 (.67) * Function 4 : SP in DP case - see "Technical information" on website METL LEVER - THREE POLE 8-7 8-9 34.50 7.50 0.50 4.00.00 (.358) (.689) (.43) (.949) (.433) 4 7 65H/ 65H 4 - OFF 655H/ 655H 5 MOM - 656H/ 656H 4-657H/ 657H 4 MOM OFF MOM 658H/ 658H 4 OFF MOM 659H/ 659H 8 OFF 3.80 (.5) 5 8 3 6 9.00.00 (.47) (.47) Ø.00x0.75 S (.47Dx0.75 S) 0.80 (.03) 4.90 (.586) 7.0 (.79) NSULTED LEVER - SNGLE POLE 4.00 3.50.50 5.00.00 (.55) (.53) (.453) (.59) (.433) 63NH/ 63NH 8 - OFF 635NH/ 635NH 4 MOM - 636NH/ 636NH 8-637NH/ 637NH 33 MOM OFF MOM 638NH/ 638NH 33 OFF MOM 639NH/ 639NH 33 OFF 9.50 (.6) 3 Ø.00x0.75 S (.47Dx0.75 S) 0.80x6.35 (.03x.5) 5.00 (.59) 7.0 (.79) 4
NSULTED LEVER - DOUBLE POLE 64NH/ 64NH 6 - OFF 644NH/ 644NH* 30 644NH/R 644NH-R* 6 MOM 644NH/-R 644NH-R* 6 MOM MOM 645NH/ 645NH 6 MOM - 646NH/ 646NH 6-647NH/ 647NH 6 MOM OFF MOM 648NH/ 648NH 30 OFF MOM 649NH/ 649NH 30 OFF 9.70 (.69) 3.50 3.50.50.50.00 (.846) (.53) (.45) (.846) (.433).00 (.433) B4 B5 B6 Ø.00x0.75 S (.47Dx0.75 S) 0.80x6.35 (.03x.5) 4.70 (.579) 6.80 (.67) * Function 4 : SP in DP case - see "Technical information" on website PNEL SWTCHES NSULTED LEVER - THREE POLE 8-7 8-9 65NH/ 65NH 4 - OFF 655NH/ 655NH 5 MOM - 656NH/ 656NH 4-657NH/ 657NH 4 MOM OFF MOM 658NH/ 658NH 4 OFF MOM 659NH/ 659NH 8 OFF 3.80 (.5) 34.50 3.50.0 4.00.00 (.358) (.53) (.44) (.949) (.433) 4 7 5 8 3 6 9.00.00 (.47) (.47) Ø.00x0.75 S (.47Dx0.75 S) 0.80x6.35 (.03x0.5) 4.90 (.586) 7.0 (.79) ll models also available with normalized quick-connect terminals H/3 or NH/3. OPTS BSC P/N For 600H series only T Tropicalized diallylphthalate case (-40 C to +85 C) (-40 F to +85 F) O-ring K Front panel sealing by O-ring and sealing washer. Protects the switch against water and dust. Panel seal withstands bar pressure and remains sealed even when switch is operated Sealing washer L Special threaded bushing, length 6 mm (.69) LUXE Chrome plated lever and cap nut U7 TK LUXE Options T, K and LUXE. GK G Black finish on bushing, lever and nuts. ncludes tropicalization (option T) and locking ring U. GK Option G + front panel sealing by O-ring and sealing washer (as described in option K) G-038 Option G + fluorescent tip on lever. White fluorescent tip becomes luminous when submitted to ultra violet rays. G-38 5
PNEL SWTCHES LOCKNG LEVERS BSC P/N For 600H series only For and pole models. For 3-pole models, refer to 6000 series. Ø.90-3NS (5/3''3NS).90 9.40 (.468) (.763) Ø.90-3NS (5/3''3NS).90 9.40 (.468) (.763) Ø.90-3NS (5/3''3NS).90 0.40 (.468) (.8) -V locked position -V locked positions -3V 3 locked positions CTUTOR OPTS BSC P/N For 600H series only For and pole models. Ø6.00 (.36D) -4 30 mm (.8) long actuator -5 40 mm (.574) long actuator -6 Retro style actuator (gold plated or chrome plated : on request) X595 Ergonomic flat plastic actuator Ø6.00 (.36D) 30.00 (.8) 40.00 (.574) 0.50 (.43).80 (.0) 6.30 (.035) Ø6.30 (.48D) 5.00 (.590) -4-5 -6 X595 6