e Static Indoor Key Features Flexible flat conductor strip with High Output Red 625nm, Green: 520nm, Blue: 465nm LEDs, RGB colors can be used together with White LED to create different tone of White or soften the RGB color pallet Ideal for IP20 interior or IP65 (with optional sleeve) location applications such as cove, under-counter/cabinet, and lighting accents Sold per foot and manufactured to specified lengths with factory attached end preps All Duratape features 2-circuit substrate for optimum heat dissipation, minimizing voltage drop while increasing run lengths per power feed, standardizing electrical flow over entire length of the strip for maximum product reliability All Duratape features double sided solder points for maximum conductivity and durability Pre-assembled to specific lengths with various connector options for project requirements and efficient power configuration Max continuous length: up to 16 per run DMX 512 interface available Dimensional Drawings 0.66" O.C. Field cut possible every 4. Caution! Field cutting should only be done before power is connected. Design Installation Examples uratape Static Indoor. With option PVC sleeve 0.48" 13/32 0.09" Spacing LEDs DURATAPE TM RGB RGB Tapelight LED Tapelight strip emits sharp, color changing effects in outdoor niche, cove and architectural decorative applications. Details 0.66 OC LED Spacing 18 LEDs per foot End Preps Factory preped end preps available (See Page 2) Field Cuts Mounting Installation Power Supply Listing Compliance Warranty Fixture Data Model Efficacy Lm/Wt See page 2 for cut zones Includes installation-ready 3M tape adhesive for simplified installation directly to mounting channel or application surface Optional aluminum channels with base and cover can be used to install decorative, protective covers Listed Class 2 output, 24V DC power supply required culus Class 2 Listed E471161 Tested in accordance with LM-79-08 ROHS compliant 3 year warranty Lm/Ft RGB 46.86 164 3.5 Wt/Ft LED Data Model IP20 Wt/LED Viewing Angle Class 2 Lifespan at 90% drive RGB 0.20 120 40,000hrs * LEDs operating at 90% of LED manufacturers maximum current rating. Cove Task ape Static Indoor. With option PVC sleeve Directional Cove Lighting Under Directional Directional Task Cove Lighting Cove Lighting Toe Kick Ordering Guide PRODUCT CODE INTENSITY WATTAGE IP RATING LED COLOR VOLTAGE + END PREP + MOUNTING + Shelf Lighting DL Duratape HO High Output 35 3.5 W/ft I Indoor Toe Kick Shelf Lighting IP20 RGB Red: 625nm, Green: 520nm Blue: 450nm 24 24 VDC Toe Kick Shelf Lighting POWER SUPPLY Targetti USA - A Targetti Group Company - 750-A W. 17 th St. Costa Mesa, CA 92627 - Phone (714) 513-1991 - Email: targettiusa@targetti.com - www.targetti.us - 06.18.18 - Page 1 of 6
End Preps and Connectors DURATAPE TM RGB FF F IP20 FF INDOOR F A B Required end preps: (One required for each run of tape) HH H C A 07UI3CBL1 (3-circuit RGB) Factory attached single 3 circuit lead wire prep. 24 four conductor Lead wire/dead end allows for connection to power at lead end and field trim of Duratape product at the other end. 07UI3ADDCBL: ADDITIONAL LEAD WIRE (3-circuit RGB) Additional lead wire purchased per foot and factory attached to specified run leads. Lead wire can be field cut to desired length. B 07UI3CBL2 (3-circuit RGB) Factory attached double ended 3 circuit lead wire prep. 24 four conductor lead wire at both ends. One end can be used for power connectivity while the other end can be used for interconnection to run to an additional length of Duratape. 07UI3ADDCBL: ADDITIONAL LEAD WIRE (3-circuit RGB) Factory attached single 3 circuit lead wire prep. 24 four conductor Lead wire/dead end allows for connection to power at lead end and field trim of Duratape product at the other end. D C 07UI3FOLDCBL-XX (3-circuit RGB) Factory attached 3 circuit wire fold (specified length). Wire folds are factory attached to Duratape to meet your specified installation requirements. Wire fold lengths available are 2, 3, 4, 6, 12. Add length number to end of part number. GG G D 07UI3LICON (3-circuit RGB) Removable/lockable 3 circuit interconnect lead wire. 24 four conductor lead wire with locking and unlocking lead connector. E Optional Connectors: E 07UI3ADDCON (3-circuit RGB) Additional 3 circuit connectors. Lead wire connectors 3/ea per connection. H Targetti USA - A Targetti Group Company - 750-A W. 17 th St. Costa Mesa, CA 92627 - Phone (714) 513-1991 - Email: targettiusa@targetti.com - www.targetti.us - 06.18.18 - Page 2 of 6
DURATAPE TM RGB Profiles DL-ALUM-U-6 Low profi le aluminum U-Channel for linear run Available in 6 1/2 ID, 5/8 OD, 1/4 H DL-ALUM-L-6 Aluminum L-Channel 1/2 x 1/2 for linear run Duratape can be mounted at either 0º or 90º mounting positions. Available in 6 DL-I-MCHAN-4 Linear Mounting channel. Available in 4 DL-C-2PC-C (Clear) DL-C-2PC-F10/F30/F60 (Frosted) Two-piece mounting tube; base (clear) with cover (frosted) for linear applications. Frosted diffusion levels, 10%, 30% or 60%. Available in 4 DL-C-45-MCH-4 45 mounting base for 45 mounted linear applications. Available in 4 DL-C-45-CVR-4-C (Clear) DL-C-45-CVR-4-F10/F30/F60 (Frosted) 45 mounting base cover. Available in 4 0.66 0.20 0.73 0.20 0.375 0.66 0.62 0.81 0.87 Targetti USA - A Targetti Group Company - 750-A W. 17 th St. Costa Mesa, CA 92627 - Phone (714) 513-1991 - Email: targettiusa@targetti.com - www.targetti.us - 06.18.18 - Page 3 of 6
DURATAPE TM RGB Profiles 0.92 1.00 0.48 0.48 0.39 0.77 0.76 0.32 PRAP20 Surface mount aluminum channel. Anodized aluminum rigid profi le complete with opal translucent diffuser cover. Available in 6 KTPRAP20 Mounting Kit: (10) mounting clips for aluminum channel, (5) end caps with hole for interconnectivity, (5) end caps with no hole for run length PRIN20 Flush mount aluminum channel. Anodized aluminum rigid profi le complete with opal translucent diffuser cover. Available in 6 KTPRIN20 Mounting Kit: (10) mounting clips for aluminum channel, (5) end caps with hole for interconnectivity, (5) end caps with no hole for run length PRAN20 45º aluminum channel. Anodized aluminum rigid profi le complete with opal translucent diffuser cover. Available in 6 KTPRAN20 Mounting Kit: (10) mounting clips for aluminum channel, (5) end caps with hole for interconnectivity, (5) end caps with no hole for run length PRINTCG Surface mounted walk over rated continuous illumination aluminum channel. Includes frosted polycarbonate cover for shadowless light distribution. Available in 1M KTPRINTCG Mounting Kit: (10) mounting clips for aluminum channel, (5) end caps with hole for interconnectivity, (5) end caps with no hole for run length 0.60 1.00 2.52 PRINCG Flush Mount aluminum profi le for installation in plasterboard. Complete with white lens. Available in 6 Targetti USA - A Targetti Group Company - 750-A W. 17 th St. Costa Mesa, CA 92627 - Phone (714) 513-1991 - Email: targettiusa@targetti.com - www.targetti.us - 06.18.18 - Page 4 of 6
The aluminium profile is completed, depending on the application chosen, with screens (flat front and rear pair of screens for indirect emission), side closure caps and suspension kit. DURAPROFILE PLUS - ALUMINIUM DOUBLE EMISSION PROFILE * Code Description L Barcode 80119058 new PRDESO Double emission aluminium profile 1220 39970 1 new PRDESO-SL Rear support for surface mount 1220 39987 1 new PRDESO-FL Front screen in flat opal polycarbonate plate 1220 39994 1 DURATAPE TM RGB Duraprofile Plus Profile - Aluminum Double And Single Emissions new PRDESO-FLR Couple of opal polycarbonate rear screen 1220 40020 1 new KTPRDESO-FL Set of two side caps flat screen - 40068 1 new KTPRDESO Linear architectural Suspension profile kit configurable in direct, indirect * Available emission upon or request. both, for high levels of light emission Rear - support 40051 required 1 for ceiling mounting, code PRDESO-SL Profile features internal compartment suitable for integral power supply and dimming module (Consult Factory) The direct emission is configurable with the use of 1 to 4 Duratape strips; Indirect emission uses two strips Mounting: On ceiling for unidirectional or suspended for unidirectional or double emission (direct & indirect) Manufactured according to specification, with lens (flat front and rear pair of lens for indirect emisison), side closure caps and suspension kit Possibility of on/off switching and dimming separate for direct and indirect lighting 5ft Max. 2.87" Ceiling mounting shown with 4 strips for direct light. 2.44" Ceiling mounting shown with 3 strips for direct light. Suspended mounting shown with 2 strips for indirect lighting and SUSPENDED up to 4 strips MOUNTING for direct WITH TWO STRIPS FOR light. INDIRECT LIGHTING AND 4 FOR DIRECT LIGHT CEILING MOUNTING WITH 4 STRIPS FOR DIRECT LIGHT CEILING MOUNTING WITH 3 STRIPS FOR DIRECT LIGHT Suspended LINES OF LIGHT FOR GENERAL LIGHTING PRDESO (Required) Double emission aluminum channel. Available in 4 PRDESO-FL (Optional) Front lens in flat opal polycarbonate. Available in 4 PRDESO-FLR (Optional) Couple of opal polycarbonate rear lens. Available in 4 KTPRDESO-FL (Required) Set of two end caps. KTPRDESO (Required) Suspension kit completed with suspension mounting kit and 5ft aircraft cable. Surface Mount PRDESO (Required) Double emission aluminum channel. Available in 4 PRDESO-SL (Optional) Rear support for surface mount. Available in 4 PRDESO-FL (Optional) Front lens in flat opal polycarbonate. Available in 4 KTPRDESO-FL (Optional) Set of two end caps. KTPRDESO-FL Targetti USA - A Targetti Group Company - 750-A W. 17 th St. Costa Mesa, CA 92627 - Phone (714) 513-1991 - Email: targettiusa@targetti.com - www.targetti.us - 06.18.18 - Page 5 of 6
DURATAPE TM RGB Power Supply (REQUIRED) Type Wattage Input/Output Voltage Dimmable IP Rating Output Dimmensions DEDDI1001244CDMX ELECTRONIC ADDRESSABLE DMX DRIVER 100W 120-277V / 24V DMX DIMMING NEMA1 ENCLOSURE UL CLASS 2 12 x 12 x 4 1 DEDDI2002244CDMX ELECTRONIC ADDRESSABLE DMX DRIVER 2X100W 120-277V / 24V DMX DIMMING NEMA1 ENCLOSURE UL CLASS 2 12 x 12 x 4 1 DEDDxxxDMX consult factory ELECTRONIC ADDRESSABLE DMX DRIVER STANDALONE, UL LISTED ENCLOSURE PROVIDED BY OTHERS consult factory 120-277V / 24V DMX DIMMING N/A UR CLASS 2 consult factory 1 Dimensions include enclosure with mounting bracket. * Constant voltage drivers 50/60HZ, voltage regulated with short circuit protection. Operating temperature -40 C- 80 C * Installation of power supply must be compliant to Class 2 installation standards. Refer to NEC and local building code requirements. Controller (Optional) Type Application Voltage Listing Dimensions TGDMXSLESAU9 TGCBUPWMX44 Stand-alone DMX Programmable Controller with Easy to Use Software Interface CASAMBI PWM four channel wireless Bluetooth controller # Ouput Channels Number of Areas Number of Scenes Indoor Only 5.5V DC ETL, UL 5.3"W x 5.5"H x 1.9D 256 1 20 IP20 24V DC UL Plenum 2.2 x 1.2 x 0.7 4 1 CASAMBI App Drivin TGDMXSLESAU9 TGCBUPWM44 TAPE MAXIMUM LENGTH IN FEET PER DRIVER Fixture Wattage 2.8W 3.0W 3.9W 4.2W 4.4W 8.8W 40W 11FT 10FT 8FT 7FT 7FT 3FT Driver Wattage 60W 17FT 16FT 12FT 11FT 10FT 5FT 96W 27FT 25FT 19FT 17FT 17FT 8FT 90W 25FT 24FT 18FT 18FT 16FT 8FT 2X90W (2) 25FT (2) 24FT (2) 18FT (2) 18FT (2) 16FT (2) 8FT 3X90W (3) 25FT (3) 24FT (3) 18FT (3) 18FT (3) 16FT (3) 8FT 100W 28FT 26FT 20FT 19FT 18FT 9FT 2X100 (2) 28FT (2) 26FT (2) 20FT (2) 19FT (2) 18FT (2) 9FT Targetti USA - A Targetti Group Company - 750-A W. 17 th St. Costa Mesa, CA 92627 - Phone (714) 513-1991 - Email: targettiusa@targetti.com - www.targetti.us - 06.18.18 - Page 6 of 6