PROJECT MODEL(S) TYPE DURATAPE TM HO High Output LED Tapelight Energy Efficient LED flexible linear light strip for continuous consistent color in linear applications. Extremely flexible and adjustable lengths for varied architectural applications. Key Features Energy efficient LED flexible linear light strip for continuous consistant color in linear applications Ideal for interior IP0 applications; cove, undercounter/ cabinet, lighting accents Optional sleeve available for IP65 rated applications Sold per foot manufactured in continuous lengths and shipped manufactured to specified lengths with factory attached end preps All Duratape features double sided solder points for maximum conductivity and durability Preassembled to specific lengths with various connector options for project requirements and efficient power configuration Max continuous length: up to 6 per run Multiple dimming options available Dimensional Drawings LED Data 0.66" O.C. Duratape features solder points for maximum continuity for long lifespan. Wattage Viewing Angle Lifespan at 90% drive 0.9W per LED 0 60,000hrs * LEDs operating at 90% of LED manufacturers maximum current rating. 0.48" 0.09" Details Spacing 0.66 OC LED Spacing LEDs 8 LEDs per foot Color Temp Available in 00 K, 400 K, 700 K, 3000 K and 3500 K Advanced LED binning with / step MacAdams ellipse End Preps Factory prepped end preps available (See Page ) Field Cuts See page for cut zones Mounting Includes installationready 3M tape adhesive for simplified installation directly to mounting channel or application surface Installation Power Supply Listing Compliance Warranty Fixture Data Color Temp Efficacy* Lm/Wt Lm/Ft Wt/Ft Wt/LED 3000 K 6. 306 5.0 0.8 * Meets Title 4 High efficacy rating. Optional mounting channels, protective lens covers, thermal channels & heat transfer tape for optimal maintainance. Field trimmable every 4 Listed Class II 4 VDC power supply required culus / CE listed ROHS compliant 3 year warranty Ordering Guide MODEL Duratape INTENSITY HO = High Output WATTAGE 50 = 5.0 W/ft IP RATING LED COLOR = 00 K 4 = 400 K 7 = 700 K 30 = 3000 K 35 = 3500 K VOLTAGE DL HO 50 4 I = Indoor IP0 D=Outdoor IP65 Sleeve 4 = 4 VDC SEE PAGE 4 FOR POWER SUPPLIES Copyright 05 DuraLamp S.p.A A brand of Targetti Group industries 0.8.5 Page of 6
Wiring Options A B C D E F G A 07UICBL Single lead wire prep. 4 Lead wire/dead end allows for connection to power at lead end and field trim of Duratape product at the other end. B 07UICBL Double ended lead wire prep. 4 lead wire at both ends. One end can be used for power connectivity while the other end can be used for a jumper cable to run to an additional length of Duratape. Caution: Pay attention to max run lengths and voltage drops from total lead/jumper wire C 07UIJMPCBLXX Jumper cable (specified length) Jumper cables can be factory attached to Duratape to meet your specified installation requirements. Jumper lengths available as,, 3, 4, 6,. Add length number to end of part number. Caution: Pay attention to max run lengths and voltage drops from total lead/jumper wire D 07UIADDCBL Additional lead wire Purchased per foot and factory attached to specified run leads. Lead wire can be field cut to desired length. E 07UIADDCON Additional connectors. Lead wire connectors /ea per connection. F 07UIMNCON 4 lead wire with IP66 female connector. See mounting accessories for additional Minilink components. G DLHOFOLDI Duratape segment. Wire fold 8ga wire factory attached between specified lengths of segments (4 intervals only). Field Cut Details Duratape can be field cut to accomodate most installations, by cutting at the indicated field cut sections. Caution! Field cutting should only be done before connection power. 4" Copyright 05 DuraLamp S.p.A A brand of Targetti Group industries 0.8.5 Page of 6
Mounting Accessories DL4EC Standard Silicone end cap for termination of tape. DL6EC Silicone end cap for termination of tape (DLSLEEVE required). DLALUMU4 Low profile aluminum UChannel for linear run lengths, available in 4 / ID, 5/8 OD, /4 H DLALUML4 Low profile aluminum LChannel for linear run Duratape can be mounted at either 0º or 90º mounting positions. Available in 4 / x / DLI45MCH4 45 mounting base, sold in 4 foot Used with Duratape (no PVC sleeve) for 45 mounted linear applications. DLI45CVR4C (Clear) DLI45CVR4F/0/F30/F60 (Frosted) 45 mounting base cover, sold in 4 foot DLIPCC (Clear) DLIPCF0/F30/F60 (Frosted) Twopiece mounting tube; base (clear) with cover, sold in 8 foot Used with Duratape (no PVC sleeve) for linear applications. Clear or frosted at 3 diffusion levels, 0%, 30% or 60%. 0.66 0.0 DLIMCHAN8 Mounting channel, sold in 8 foot Can be used with Duratape (no PVC sleeve) and outdoor Duratape (with PVC sleeve) for linear applications. 0.0 DLHTTAPE / wide thermally conductive mounting tape. Factory attached and sold per foot. DLHSTAPE wide aluminum foil tape, used to create a flexible thermal sink. Sold in 00 rolls. 0.69 0.66 0.375 0.63 0.6 Copyright 05 DuraLamp S.p.A A brand of Targetti Group industries 0.8.5 Page 3 of 6
Profiles.38.00 0.50.00 0.50 3.75 PRDE Aluminum channel with dual lens for dual tape runs illuminating in opposite directions..00.00 PRDSAP Aluminum channel with curved lens for dual tape runs for unique lighting effects. PRDSAN Aluminum channel with curved lens for 45º angled dual tape run illumination. 0.63 0.47 0.5 0.75 0.76 0.63 0.63.00 07UOSMC7 Surface mount aluminum channel. Anodized aluminum rigid profile complete with white diffuser plastic cover. Suitable for IP65 and IP66 installation applications. Available in 4 DLALCHANFROSTEDLENS Frosted lens, available in 4 DLALCHANEC End cap with hole for DLALCHANEC End cap with no hole for run 07UOFMC7 Flush mount aluminum channel. Anodized aluminum rigid profile complete with white diffuser plastic cover for flush mounting. Suitable for IP65 and IP66 installation applications. Available in 4 DLALCHANFROSTEDLENS Frosted lens, available in 4 DLALCHANEC End cap with hole for DLALCHANEC End cap with no hole for run DLALCHAN45 45º aluminum channel. Anodized aluminum rigid profile complete with white diffuser plastic cover for flush mounting. Suitable for IP65 and IP66 installation applications. Available in 4 DLALCHANFROSTEDLENS Frosted lens, available in 4 DLALCHAN45EC 45º end cap with hole for DLALCHAN45EC 45º end cap with no hole for run 07UOWOC Recessed aluminum channel for walkover inground applications, includes frosted polycarbonate cover. Suitable for IP65 and IP66 installation applications. Available in 4 DLALCHANFROSTEDLENS Walk over frosted lens, available in 4 DLALCHANLEC End cap with hole for DLALCHANLEC End cap with no hole for run Copyright 05 DuraLamp S.p.A A brand of Targetti Group industries 0.8.5 Page 4 of 6
Power Supplies Cat No Type Voltage Wattage Listing Dimensions Dimmable DELI044 Electronic 90305V AC / 4V DC 96W / X4A** culus 0 W X 0 L 4 D* Yes DELI4044 90305V AC / 4V DC 9W / X4A** culus 0 W X 0 L 4 D* DELI30344 90305V AC / 4V DC 88W / 3x4A** culus 0 W X 0 L 4 D* DEL044 90305V AC / 4V DC 96W / X4A** UL/CE.67 W X 8.66 L.53 D DELI044D 90305V AC / 4V DC 96W / X4A** culus 0 W X 0 L 4 D* Integral DELI4044D 90305V AC / 4V DC 9W / X4A** culus 0 W X 0 L 4 D* DELI30344D 90305V AC / 4V DC 88W / 3x4A** culus 0 W X 0 L 4 D* DEL044D 90305V AC / 4V DC 96W / X4A** UL/CE.67 W X 8.66 L.53 D DMG40.64 Magnetic 0V AC / 4V DC 40W / X.6A** cetlus.00 W X 5.06 L.4 D Yes DMG60.44 0V AC / 4V DC 60W / X.4A** cetlus.5 W X 6.55 L.55 D DMG044 0V AC / 4V DC 96W / X4A** cetlus 3.00 W X 9.80 L 3.00 D DMG944 0V AC / 4V DC 9W / X4A** cetlus 3.00 W X 9.80 L 3.00 D * Dimensions include enclosure with mounting bracket ** 4A maximum current protection for each seconday circuit *** Constant voltage drivers 50HZ, voltage regulated with short circuit protection. operating temperature 40 C 80 C Electronic Drivers For use with 00V interface (DLD0) for secondary side dimming control. Generally used for programmable dimming levels for changing scenarios. Magnetic Transformers For use with primary side dimming with an MLV forward phase dimming system (supplied by others). Generally used for a preset dimming level. Electronic Driver Electronic Driver Enclosure Magnetic Transformer Electronic Driver Power Supply Magnetic Power Transformer Supply Line Voltage Input Line Voltage Input UL listed Jbox by others Wiring from transformer to Jbox must be to Class II standard. Refer to NEC and local code requirements. UL listed Jbox by others Wiring from transformer to Jbox must be to Class II standard. Refer to NEC and local code requirements. Duratape Duratape Copyright 05 DuraLamp S.p.A A brand of Targetti Group industries 0.8.5 Page 5 of 6
Dimmers Cat No Type Voltage Max Load Dimensions DMG600 Magnetic 0VAC/0VAC 450W Single Gang Box Recessed DMG600H 77VAC/77VAC 450W Single Gang Box Recessed DMG000 0VAC/0VAC 800W Dual Gang Box Recessed DMG000H 77VAC/77VAC 800W Dual Gang Box Recessed DLD0 Electronic SEL V: 04V 96W.5 W X 7 L X 0.75 D Control: 0V (< 0.6 ma) Single Gang Dimmer DLD0 Dimming Module System Layout Example Diagram Circuit t 4V DC Input t 4V DC Input 00V Input 4V DC Input 00V Input t 4V DC Input Circuit 00V Input 4V DC Input Circuit 3 Osram DIM Osram DIM Osram DIM DIM DIM OT OT OT LED Output OT LED OT Output LED Output 3 LED Output LED Output LED OT Output 3 LED Output LED Output LED Output LED Output LED Output (to on/off switch) hot(input) V V N L neutral ground Copyright 04 DuraLamp S.p.A A brand of Targetti Group industries 0.8.5 Page 6 of 6