Appendix A COILS FOR RUN-AROUND HEAT RECOVERY SYSTEM Cooling Coil Model number D--B45 Coil Information Tag Exhaust Wint Actual airflow Quantity System type 1 Chilled Water Entering dry bulb Entering wet bulb Unit size 80 Total capacity Coil type UW Sensible Capacity Coil tube drainability Leaving dry bulb Rows 2 Leaving wet bulb Nominal coil height 45" (1143 mm) Actual coil face area Finned length 126" (3200 mm) APD Fin material Aluminum Volume Fin spacing 143 fins per foot Elevation Fin type Delta flo E Face velocity Tube matl/wall thickness.016 (0.406 mm) copper Max Air PD Coil coating No Max face velocity Rigging weight 252.6 lb Max fin spacing Installed weight 344.4 lb Turbulators Note: Ratings outside the scope of the ARI Air-Cooling and Air-Heating Coils Certification Program. 19437 cfm 70.00 F 54.00 F 212.28 MBh 212.27 MBh 60.00 F 49.72 F 39.38 sq ft 0.18 in H2O 9.35 gal 0.00 ft 493.64 ft/min Yes Chilled Water Information Fluid type Ethylene Glycol Fluid concentration 30.00 % Standard fluid flow rate 43.00 gpm Entering fluid temp 45.00 F Fluid temp rise 11.23 F Leaving water temperature 56.23 F Fluid PD Maximum water pressure drop Fluid velocity Fouling factor Reynolds number 5.00 ft H2O 2.11 ft/sec 0.00000 hr-sq ft-deg 2690.73 Each 56 03/01/2005
Refrigerant Information Refrigerant type Liquid temp Suction temp Circuiting type Distributor type - ent air side Distributor type - lvg air side DX circuits - ent air side DX circuits - lvg air side LDB - ent air vert split Packed elbows LWB - ent air vert split Cooling coil Number of distr - ent coil type #1 Number of distr - lvg coil type #1 Number of distr - ent coil type #2 Number of distr - lvg coil type #2 Number of distr - ent coil type #3 Number of distr - lvg coil type #3 Total cap ent coil type #1 Total cap lvg coil type #1 Total cap ent coil type #2 Total cap lvg coil type #2 Total cap ent coil type #3 Total cap lvg coil type #3 Stacked Coil Information Qty of stacked coil #1 Qty of stacked coil #2 Qty of stacked coil #3 Nominal ht stacked coil #1 Nominal ht stacked coil #2 Nominal ht stacked coil #3 Coil bank airflow 38874 cfm Coil bank total cap Coil bank sensible cap Coil bank standard flow rate Coil bank volume Coil bank rigging weight Coil bank installed weight Coil bank fluid PD 424.56 MBh 424.54 MBh 86.00 gpm 18.71 gal 505.1 lb 688.8 lb 5.00 ft H2O 57 03/01/2005
Cooling coil ( CLCL ) Items: Exhaust Wint Exhaust Wint Tags: Exhaust Wint Exhaust Wint 03/01/2005 07:15:50 PM Job01 3/8" (10mm) NPT (INT) VENT 5 1 /4" (1 33mm ) (L.H.) 8 1/ 8" (20 6mm ) (R.H.) 2 1/2" (64mm) NPT (EXT) SUPPLY R.H. 2 1/2" (64mm) NPT (EXT) RETURN L.H. 2 1/2" (64mm) NPT (EXT) RETURN R.H. 2 1/2" (64mm) NPT (EXT) SUPPLY L.H. 1 02 1/ 8" (25 94mm ) 3/8" (10mm) NPT (INT) DRAIN LEFT HAND 8 1 1/8" (2061 mm) AIR FLOW AIR FLOW RIGHT HAND 7 8" (19 81mm ) 54 5/8 " (13 87mm ) 58" (1 473m m) 34 5/8" (879mm) 3 1 1/2" (800 mm) 11 1 /2" (2 92mm ) 8 1/8" (206 mm) (L.H.) 5 1/4" (133m m) (R.H.) 58 TOPSS Dimension Drawing ALL WEIGHTS AND DIMENSIONS ARE APPROXIMATE. CERTIFIED PRINTS ARE AVAILABLE UPON REQUEST. Page: 1
Job Information Cooling coil Job01 Richmond Comments Model number D--B45 Coil Information Tag Exhaust Wint Actual airflow Quantity System type 1 Chilled Water Entering dry bulb Entering wet bulb Unit size 80 Total capacity Coil type UW Sensible Capacity Coil tube drainability Leaving dry bulb Rows 2 Leaving wet bulb Nominal coil height 45" (1143 mm) Actual coil face area Finned length 126" (3200 mm) APD Fin material Aluminum Volume Fin spacing 143 fins per foot Elevation Fin type Delta flo E Face velocity Tube matl/wall thickness.016 (0.406 mm) copper Max Air PD Coil coating No Max face velocity Rigging weight 252.6 lb Max fin spacing Installed weight 344.4 lb Turbulators Note: Ratings outside the scope of the ARI Air-Cooling and Air-Heating Coils Certification Program. 19437 cfm 70.00 F 54.00 F 212.28 MBh 212.27 MBh 60.00 F 49.72 F 39.38 sq ft 0.18 in H2O 9.35 gal 0.00 ft 493.64 ft/min Yes Chilled Water Information Fluid type Ethylene Glycol Fluid concentration 30.00 % Standard fluid flow rate 43.00 gpm Entering fluid temp 45.00 F Fluid temp rise 11.23 F Leaving water temperature 56.23 F Fluid PD Maximum water pressure drop Fluid velocity Fouling factor Reynolds number 5.00 ft H2O 2.11 ft/sec 0.00000 hr-sq ft-deg 2690.73 Each 59 03/01/2005
Refrigerant Information Refrigerant type Liquid temp Suction temp Circuiting type Distributor type - ent air side Distributor type - lvg air side DX circuits - ent air side DX circuits - lvg air side LDB - ent air vert split Packed elbows LWB - ent air vert split Cooling coil Number of distr - ent coil type #1 Number of distr - lvg coil type #1 Number of distr - ent coil type #2 Number of distr - lvg coil type #2 Number of distr - ent coil type #3 Number of distr - lvg coil type #3 Total cap ent coil type #1 Total cap lvg coil type #1 Total cap ent coil type #2 Total cap lvg coil type #2 Total cap ent coil type #3 Total cap lvg coil type #3 Stacked Coil Information Qty of stacked coil #1 Qty of stacked coil #2 Qty of stacked coil #3 Nominal ht stacked coil #1 Nominal ht stacked coil #2 Nominal ht stacked coil #3 Coil bank airflow 38874 cfm Coil bank total cap Coil bank sensible cap Coil bank standard flow rate Coil bank volume Coil bank rigging weight Coil bank installed weight Coil bank fluid PD 424.56 MBh 424.54 MBh 86.00 gpm 18.71 gal 505.1 lb 688.8 lb 5.00 ft H2O 60 03/01/2005
Cooling coil ( CLCL ) Items: Exhaust Wint Exhaust Wint Tags: Exhaust Wint Exhaust Wint 03/01/2005 07:15:50 PM Job01 3/8" (10mm) NPT (INT) VENT 5 1 /4" (1 33mm ) (L.H.) 8 1/ 8" (20 6mm ) (R.H.) 2 1/2" (64mm) NPT (EXT) SUPPLY R.H. 2 1/2" (64mm) NPT (EXT) RETURN L.H. 2 1/2" (64mm) NPT (EXT) RETURN R.H. 2 1/2" (64mm) NPT (EXT) SUPPLY L.H. 1 02 1/ 8" (25 94mm ) 3/8" (10mm) NPT (INT) DRAIN LEFT HAND 8 1 1/8" (2061 mm) AIR FLOW AIR FLOW RIGHT HAND 7 8" (19 81mm ) 54 5/8 " (13 87mm ) 58" (1 473m m) 34 5/8" (879mm) 3 1 1/2" (800 mm) 11 1 /2" (2 92mm ) 8 1/8" (206 mm) (L.H.) 5 1/4" (133m m) (R.H.) 61 TOPSS Dimension Drawing ALL WEIGHTS AND DIMENSIONS ARE APPROXIMATE. CERTIFIED PRINTS ARE AVAILABLE UPON REQUEST. Page: 1
Job Information Heating Coil (HTCL) Job01 Richmond Comments Model number D--B24 Coil Information Tag AHU-3 Wint Quantity 1 System type Hot Water Unit size 66 Coil type 5W Coil tube drainability Drainable Rows 1 Finned length 126" (3200 mm) Nominal coil height 24" (610 mm) Fin type Prima-Flo H Fin material Aluminum Fin spacing 130 fins per foot Tube matl/wall thickness.020 (0.508 mm) copper Coil coating No Turbulators Yes Hot Water Information Fluid type Ethylene Glycol Fluid concentration 30.00 % Standard fluid flow rate 36.21 gpm Entering fluid temp 56.00 F Fluid temp drop 11.23 F Leaving fluid temp 44.77 F Fluid PD 20.45 ft H2O Max fluid PD Fluid velocity 5.00 ft/sec Fouling factor 0.00050 hr-sq ft-deg Reynolds number 7921.06 Steam Information Steam pressure Steam PD Modulated Degrees superheat Condensate flow rate Actual airflow Entering dry bulb Leaving dry bulb Total capacity Actual coil face area APD Volume Elevation Face velocity Max air PD Max face velocity Max fin spacing Rigging weight Installed weight Stacked Information Qty of stacked coil #1 Qty of stacked coil #2 Qty of stacked coil #3 Nominal ht stacked coil #1 Nominal ht stacked coil #2 Nominal ht stacked coil #3 Coil bank airflow Coil bank total cap Coil bank standard flow rate Coil bank fluid PD Coil bank volume Coil bank rigging weight Coil bank installed weight 12265 cfm 8.00 F 21.44 F 178.74 MBh 21.00 sq ft 0.15 in H2O 3.14 gal 0.00 ft 584.06 ft/min 104.9 lb 131.0 lb 29130 cfm 424.50 MBh 86.00 gpm 20.45 ft H2O 7.45 gal 249.2 lb 311.2 lb Note: Rated and Certified in accordance with the current edition of ARI Standard 410. 62
Heating coil ( HTCL ) Items: AHU-3 Wint AHU-3 Wint Tags: AHU-3 Wint AHU-3 Wint 03/01/2005 07:15:49 PM Job01 24" 5W 1 ROW 1 1/2" (38mm) NPT (EXT) RETURN 1 1/8" (29mm) 9" (229mm) 3/8" (9mm) NPT (INT) VENT 25 1/2" (648mm) AIR FLOW 1 1/2" (38mm) NPT (EXT) SUPPLY 9" (229mm) 3/8" (9mm) NPT (INT) DRAIN 1 1/8" (29mm) 4" (102mm) 63 TOPSS Dimension Drawing ALL WEIGHTS AND DIMENSIONS ARE APPROXIMATE. CERTIFIED PRINTS ARE AVAILABLE UPON REQUEST. Page: 1
Job Information Heating Coil (HTCL) Job01 Richmond Comments Model number D--B33 Coil Information Tag AHU-3 Wint Quantity 1 System type Hot Water Unit size 66 Coil type 5W Coil tube drainability Drainable Rows 1 Finned length 126" (3200 mm) Nominal coil height 33" (838 mm) Fin type Prima-Flo H Fin material Aluminum Fin spacing 130 fins per foot Tube matl/wall thickness.020 (0.508 mm) copper Coil coating No Turbulators Yes Hot Water Information Fluid type Ethylene Glycol Fluid concentration 30.00 % Standard fluid flow rate 49.79 gpm Entering fluid temp 56.00 F Fluid temp drop 11.23 F Leaving fluid temp 44.77 F Fluid PD 20.45 ft H2O Max fluid PD Fluid velocity 5.00 ft/sec Fouling factor 0.00050 hr-sq ft-deg Reynolds number 7921.06 Steam Information Steam pressure Steam PD Modulated Degrees superheat Condensate flow rate Actual airflow Entering dry bulb Leaving dry bulb Total capacity Actual coil face area APD Volume Elevation Face velocity Max air PD Max face velocity Max fin spacing Rigging weight Installed weight Stacked Information Qty of stacked coil #1 Qty of stacked coil #2 Qty of stacked coil #3 Nominal ht stacked coil #1 Nominal ht stacked coil #2 Nominal ht stacked coil #3 Coil bank airflow Coil bank total cap Coil bank standard flow rate Coil bank fluid PD Coil bank volume Coil bank rigging weight Coil bank installed weight 16865 cfm 8.00 F 21.44 F 245.76 MBh 28.87 sq ft 0.15 in H2O 4.31 gal 0.00 ft 584.06 ft/min 144.3 lb 180.2 lb 29130 cfm 424.50 MBh 86.00 gpm 20.45 ft H2O 7.45 gal 249.2 lb 311.2 lb Note: Rated and Certified in accordance with the current edition of ARI Standard 410. 03/01/2005 64
Heating coil ( HTCL ) Items: AHU-3 Wint AHU-3 Wint Tags: AHU-3 Wint AHU-3 Wint 03/01/2005 07:15:49 PM Job01 33" 5W 1 ROW 1 1/2" (38mm) NPT (EXT) RETURN 1 1/8" (29mm) 13 1/2" (343mm) 3/8" (9mm) NPT (INT) VENT 34 1/2" (876mm) AIR FLOW 1 1/2" (38mm) NPT (EXT) SUPPLY 13 1/2" (343mm) 3/8" (9mm) NPT (INT) DRAIN 1 1/8" (29mm) 4" (102mm) TOPSS Dimension Drawing ALL WEIGHTS AND DIMENSIONS ARE APPROXIMATE. CERTIFIED PRINTS ARE AVAILABLE UPON REQUEST. Page: 2 65
Appendix B PUMP FOR HEAT RECOVERY SYSTEM 66
Appendix C EXPANSION TANK FOR HEAT RECOVERY SYSTEM 67
68
Appendix D DISTRIBUTED PUMPING PUMP SELECTIONS AHU-1: 69
AHU-2: 70
AHU-3: 71
AHU-4: 72
Appendix E RC-CURVES 73