BMV SERIES HYDRAULIC MOTOR BMV series motor adapt the advanced Geroler gear set designed with disc distribution flow and high pressure.the unit can be supplied the individual variant in operating multifunction in accordance with requirement of applications. Characteristic features: * Advanced manufacturing devices for the Geroler gear set,which use low pressure of start-up, provide smooth and reliable operation and high efficiency. * The output shaft adapts in tapered roller bearings that permit high axial and radial forces. The case can offer capacities of high pressure and high torque in the wide of applications. * Advanced design in disc distrbution flow, which can automatically compensate in operating with high volume efficiency and long life, provide smooth and reliable operation. Main Specificaion Type BMV 315 BMV 400 BMV 0 BMV 630 BMV 00 BMV 00 Geometric displacement (cm 3 /rev.) 333 41 5 666 01 0 Max. speed Max. torque Max. output (rpm) (N m) (kw) Max. pressure drop (MPa) Max. flow Weight (kg) (L/min) peak peak 5 630 11 120 3.0 46.0 0 0 31. 0 600 10 40 47.0 56.0 0 32.6 400 40 60 60 47.0 56.0 0 33.5 3 30 60 140 40.0 56.0 0 34. 2 300 0 70 33.0 44.0 0 36.5 0 15 20 0.6 40.0 0 3.6 * Continuous pressure :Max. value of operating motor continuously. * Intermittent pressure :Max. value of operating motor in 6 seconds per minute. * Peak pressure:max. value of operating motor in 0.6 second per minute. 7
Performance Data BMV 315 [333cm 3 /rev.] 3.5 7 BMV 400 [41cm 3 /rev.] 3.5 7 0 0 0 26 153 55 5 3 2 136 24 123 36 1 445 7 4 2 56 24 3 54 312 4 304 2 22 6 366 2 443 26 473 54 440 23 466 53 465 2 45 5 452 20 442 364 4 441 430 470 412 50 6 636 52 654 642 1 636 7 626 361 615 437 60 466 53 54 742 77 51 15 137 7 3 7 7 7 430 70 460 576 45 5 4 133 40 2 36 2 06 4 5 452 71 565 00 70 44 1112 1 111 15 0 3 345 7 4 70 43 47 544 0 0 3 16 44 0 1 15 2 236 7 26 15 5 3 4 1 4 2 571 35 3 44 402 113 34 3 35 2 374 24 361 4 346 4 331 473 301 56 56 1 50 43 603 113 56 0 53 233 53 21 55 2 553 411 536 46 6 565 776 15 42 42 112 3 6 231 01 34 74 407 770 463 740 54 6 40 40 1 43 3 36 2 2 0 344 403 6 455 43 53 11 1152 3 16 1 157 3 17 2 15 3 15 36 11 44 530 122 1346 37 30 3 32 152 25 5 13 26 130 3 1377 3 16 43 1332 5 BMV 0 [5cm 3 /rev.] 3.5 7 BMV 630 [666cm 3 /rev.] 3.5 6 12 15 0 0 2 5 36 3 233 2 2 237 1 7 2 3 1 34 1 461 46 1 0 2 4 13 41 7 43 236 465 6 446 334 423 33 37 45 66 73 1 2 137 74 5 742 234 723 4 711 332 676 31 6 457 5 03 34 25 0 30 1 26 2 231 0 1 7 32 74 37 454 110 15 1232 33 10 132 1 10 2 0 6 123 325 12 374 12 4 13 13 134 32 4 5 1 72 3 60 3 2 0 6 3 135 366 1340 444 07 11 5 2 43 0 66 1 60 6 45 2 36 260 15 3 7 4 432 0 0 0 72 0 264 6 251 4 2 2 25 2 130 5 13 552 555 72 54 53 5 5 3 45 2 45 25 46 4 7 12 13 3 6 71 63 6 56 3 37 1 76 257 1 25 712 5 10 12 11 1137 6 11 4 3 1 71 63 7 52 254 23 7 1 126 12 1315 26 1364 6 12 2 13 13 1336 7 1330 5 1300 2 10 20 1237 346 154 11 07 2 66 0 74 1 5 3 2 36 6 11 4 1563 340 4 64 156 62 164 4 165 130 1 1 5 10 1 3 3 332 Torque (N m) 1340 Speed (rpm) 444 7
Performance Data BMV 00 [01cm 3 /rev.] 2.5 5 13 BMV 00 [0cm 3 /rev.] 2.5 5 7 0 0 11 2 23 60 26 1 251 1 2 153 236 5 5 2 17 7 1 565 571 52 5 50 0 566 1 5 152 526 3 4 4 46 5 3 26 30 45 56 57 55 40 1 0 1 73 2 765 3 713 25 5 1 12 56 15 7 1 1 11 7 12 7 63 23 5 56 63 54 65 4 4 115 3 1 4 1377 6 1362 237 13 12 3 0 52 6 1 67 111 3 13 3 1 232 37 3 115 7 14 01 4 13 77 15 5 176 133 15 3 136 16 113 5 3 7 0 0 312 3 326 47 3 72 30 303 123 264 4 230 1 6 640 64 655 46 642 71 634 7 6 1 602 50 2 556 16 513 237 71 7 26 2 45 7 70 3 5 1 61 6 46 0 12 13 67 233 0 25 43 25 6 3 1 136 4 133 6 1300 10 1267 17 7 10 23 15 41 03 66 14 0 1 1 163 125 2 1 5 25 5 5 6 20 20 3 26 63 23 6 1 133 5 155 25 34 2 Torque (N m) 25 Speed (rpm) 5 0
BMV DIMINSIONS AND MOUNTING DATA Model BMV315 BMV400 BMV0 BMV630 BMV00 BMV00 L 7 2 232 4 255 1 L1 47 5 74 L2 1.5.5 6.5.5 1.5 5.5 Flange 4 Drain portt Porting D M Flange W S G M5 S1 Model BMVW315 L.5 L1 L2 3.5 Note:The thickness of the stator and rotor is the dimension of L1adding on 7mm. BMVW400 155.5 0.5 BMVW0 3.5.5 BMVW630.5 47 1.5 BMVW00 6.5 5 131.5 BMVW00 2.5 74 7.5 Content Code Mounting D (depth) M (depth) S (depth) G (depth) M5 (depth) S1 (depth) P(A,B) G1 () M33 x 2 () 1-5/-12UN() G1 () M33 x 2 () 1-5/-12UN() T G1/4 (12) M x 1.5 (12) /-UNF(12) G1/4 (12) M x 1.5 (12) 7/-UNF(12) C 4-M12 () 4-M12 () 1
BMV SHAFT EXTENSIONS DIMENSIONS DATA M12depth25 Shaft A: Cylindrical shaft ø Parallel key xx70 3/-UNC depth Shaft C: Cylindrical shaft ø57.15 Parallel key 12.7x12.7x57 3/-UNC depth M12depth25 Shaft B: Splined key -DP/ Shaft BD: Splined key -DP/ Shaft T: Cone-shaft ø60 Parallel key Bxx32 Tightening torque: 7±Nm Shaft T1: Cone-shaft ø57.2 Parallel key.30x.30x Tightening torque: 7±Nm 2
BMV Series Hydraulic Motor Permissible shaft seal pressure In applications without drain line, output shaft seal exceeds a bit of the pressure in the return line. When applications use the drain line, the pressure of output shaft seal equals the pressure in drain line. Standard direction of shaft rotation: Standard When facing shaft end of motor,shaft to rotate: Clockwise when port "A" is pressurized. Counter-clockwise port "B" is pressurized. Axial and Radial forces BMV The output shaft runs in tapered bearings that permit high axial and radial forces, Curve "A" shows max radial shaft load, Any shaft loads exceeding the values quoted in the curve will involve a risk of breakage, The two other curves apply to a B bearing life of 3000 hours at 0 RPM. 3
Order Information 1 2 3 4 5 6 7 BMV Pos.1 2 3 4 5 6 7 Code Displace Flange Output shaft Port and drain port ment Rotation Paint direction Unusually function 315 400 0 630 00 00 4 W 4-Ø Square-flangeØ0, pilot Ø0 11 4-Ø Wheel-flange Ø2, pilot Ø0 A BD B C T T1 Shaft Ø, parllel key 70 Shaft Ø53., splined key -DP/ Shaft Ø53., splined key -DP/ Shaft Ø57.15, parllel key 12.7 12.7 57.15 Cone shaft Ø60, parllel key B 32 Cone shaft Ø60, parllel key.30.30. D M S G M5 S1 G1 Manifold 4 M12, G1/4 M33 2 Manifold 4 M12, M 1.5 1-5/-12UN, /-UNF G1,G1/4 M33 2, M 1.5 1-5/-12UN(), 7/-UNF(12) R Standard Opposite 00 B S No paint Blue Black Silver grey Standard Note:When the table is used, please fill the code of left rows in dash area and give us, which the code information is consists of construction, displacement, mounting flange, output shaft and ports. If the specification is not in the table or you have specific requirements, please contact us. 4