Hydraulic shop presses WPP 15 T - Hydraulic table shop press with manual pump and mobile cylinder for professional use For all repair and assembly works, e.g.: Straightening Robust frame with perforation to adjust the working table Reliable particularly precise hydraulic made in Pressure generation manual by actuating the pump lever With automatic return of the piston With chrome-plated cylinder piston With safety valve to protect the system the system against overload Including 2-piece prism kit to insert round material To machine flats, to press in bearings, bolts or similar materials imperatively use optional perforated plates WPP 15 T! To machine flats, to press in bearings, bolts or similar materials imperatively use the optional perforated plate for WPP 15 T,. 410 4005. Type WPP 15 T 400 1115 Power Max. load prism jaw Weight 15 t 3.5 t 105 kg 6-piece pressure mandrel kit with perforated plate, Ø 29, 24, 18, 14, 10, 5 mm Dimensions 1350 690 500 550 550 900 6-piece pressure mandrel kit with perforated plate for WPP 15 T 410 1115 Perforated plate for WPP 15 T 410 4005 142
WPP - Hydraulic shop presses with mobile cylinder and manual pump for professional use For all repair and assembly works, e.g.: straightening Robust frame with perforation to adjust the working table Reliable particularly precise hydraulic made in With chrome-plated cylinder piston With automatic return of the piston with safety valve to protect the system against overload Including 2-piece prism kit to insert round material To machine flats, to press in bearings, bolts or similar materials imperatively use optional perforated plates WPP 30 additionally equipped with hoist to lift and lower the working table Magnetic drilling Cutting Metal grinding Trimming retrofitting kit Foot pedal for pump Notching & Punching WPP 15 Fig. with optional foot pedal WPP 30 Equipped with a winch to lift and lower the workbench Bending! To machine flats, to press in bearings, bolts or similar materials imperatively use optional perforated plates. Presses Type WPP 15 WPP 20 WPP 30 400 1015 400 1020 400 1030 Power 15 t 20 t 30 t Max. load prism jaw 3,5 t 5 t 7,5 t Weight 120 kg 140 kg 230 kg 6-piece pressure mandrel kit with perforated plate, Ø 29, 24, 18, 14, 10, 5 mm Circular saws Dimensions in mm WPP 15 WPP 20 WPP 30 1890 620 600 500 900 1900 770 600 610 950 1980 890 600 710 1 6-piece pressure mandrel kit with perforated plate for WPP 15 410 1115 for WPP 20 410 1020 for WPP 30 410 1030 Perforated plate for WPP 15 and WPP 20 410 4005 Perforated plate for WPP 30 410 4006 Retrofitting kit foot pedal for pump without assembly for WPP 15 and WPP 20 410 1021 143 Roller conveyors Band saws
Hydraulic shop presses WPP BK - Medium-weight hydraulic shop presses with mobile cylinder, with manual and foot pump for professional use For all repair and assembly works, e.g.: straightening Robust frame with perforation to adjust the working table Reliable particularly precise hydraulic made in Pressure build-up by hand and foot control of the pump lever Due to manually operated foot pump, both hands are free to fix the workpiece With mobile cylinder piston With automatic return of the piston With safety valve to protect the system the system against overload Including 2-piece prism kit to insert round material To machine flats, to press in bearings, bolts or similar materials imperatively use optional perforated plates WPP 20 BK! To machine flats, to press in bearings, bolts or similar materials imperatively use optional perforated plates. WPP 50 BK Equipped with a winch to lift and lower the workbench Type WPP 20 BK WPP 30 BK WPP 50 BK 400 2020 400 2030 400 2050 Power 20 t 30 t 50 t Max. load prism jaw 5 t 7.5 t 12,5 t Weight 210 kg 280 kg 360 kg 6-piece pressure mandrel kit with perforated plate, Ø 29, 24, 18, 14, 10, 5 mm Dimensions WPP 20 BK WPP 30 BK WPP 50 BK 1 870 690 950 1010 1920 990 790 200 1030 1240 2000 990 790 210 1400 144 6-piece pressure mandrel kit with perforated plate for WPP 20 BK 410 2020 for WPP 30 BK 410 2030 for WPP 50 BK 410 2050 Perforated plate for WPP 20 BK 410 4002 Perforated plate for WPP 30 BK 410 4003 Perforated plate for WPP 50 BK 410 4004
WPP 50 M - Hydraulic shop presses with electrical pump and double-acting cylinder for professional use For all repair and assembly works, e.g.: straightening robust frame with punch hole for the height adjustment of the press table Automatic switch-over from accelerated idle speed to slow working speed of the cylinder Reliable particularly precise hydraulic made in With safety valve to protect the system the system against overload With a winch to lift and lower the workbench Pressure power readable on the manometer Magnetic drilling Trimming Equipped with doubleacting cylinder Including 2-piece prism kit to insert round material To machine flats, to press in bearings, bolts or similar materials imperatively use optional perforated plates Bending Metal grinding Cutting Notching & Punching WPP 50 M Presses Type WPP 50 M 400 3050 Power 50 t Max. load prism jaw 12.5 t Slow feed 1.7 mm/sec. Rapid feed 20 mm/sec. Motor power 1.5 kw Power connection 50 Hz Weight 420 kg 6-piece pressure mandrel kit with perforated plate for WPP 50 M 410 2050 Perforated plate for WPP 50 M 410 4004 Optional 6-piece pressure mandrel kit Ø 29, 24, 18, 14, 10, 5 mm Dimensions F - Height passage min. I - Width of the pump WPP 50 M 2290 985 790 210 65 1050 250 1350 350 Circular saws Roller conveyors 145 Band saws
Hydraulic shop presses WPP - Heavy-type, hydraulic professional shop presses equipped with mobile cylinder and two piston feed speeds Appropriate for assembly and straightening works as well as for workpiece inspections or to press in or press out bearings and other components Perfect for technical shops, repair shops and technical training facilities Heavy machine frame welded from steel profiles to absorb the incidental compressive force of the cylinder With two piston feed rates and pressure regulation The hydraulic system is working quite precisely in the electrical mode as well as in the manual mode Easy hight adjustment of the heavy working table without effort with the help of the hydraulic cylinder WPP 60 WPP 100 D 0 Type D 0 with a passage width of 0 mm WPP 60 401 2060 WPP 100 401 2100 WPP 100 D 0 401 2101 WPP 401 2 WPP D 0 401 2161 WPP 200 401 2200 Piston stroke mm Power Press speed Feed speed Motor power Power connection 50 Hz Weight 60 t 2.1 mm/s 8.7 mm/s 1.5 kw 540 kg 100 t 2.5 mm/s 2.2 kw 970 kg 100 t 2.5 mm/s 2.2 kw 1145 kg 400 t 2.4 mm/s 3.0 kw 1195 kg 400 t 2.4 mm/s 3.0 kw 1430 kg 400 200 t 1.8 mm/s 5.7 mm/s 3.0 kw 1690 kg 146
With motor-driven piston return Piston with unscrewable bottom Pressure manometer integrated into the frame D 0 series with large passage width of 0 mm Magnetic drilling Chain for table height adjustment fixed on the cylinder via stable flange Trimming Manometer integrated into the frame Metal grinding Cylinder adjustment by means of the handle Easy table height adjustment with the help of the hydraulic cylinder and mounting bolts. Cutting Comfortable and clearly arranged operation of the hydraulic unit WPP Presses Notching & Punching Bending Prism block kit* for WPP60 410 0060 Prism block kit* for WPP 100 410 0100 Prism block kit* for WPP 410 0 Dimensions WPP 60 mm 2120 mm mm 695 mm mm 260 F - Width with pump mm 1315 G - Distance between bolts mm H - Height passage min. mm 197 I - Height adjustment working table mm J- Width working table mm 805 WPP 100 2140 1350 755 1100 300 1665 865 WPP 100 D 0 2140 1 755 0 300 2065 865 * Kit including 2 prism blocks WPP 60 loadable with 30 tons per block WPP 100 loadable with 50 tons per block WPP loadable with 80 tons per block WPP 2200 1410 825 1100 1725 935 WPP D 0 2270 1810 825 0 2125 935 WPP 200 2270 1610 865 1300 410 1925 935 Stable frame structure with flat construction at the same time Circular saws Roller conveyors 147 Band saws
THREADED BUSHINGS with the process Threading bushings which are no longer loose! No more getting loose or turning Saves annoying drilling and avoids claims Easy assembly On almost any OPTIMUM drill press Only 2 working steps Germany 1 Flow drill 2 Thread shaper Safe connection You need 1 When flow drilling a twist-secured bushing is formed of the existing material without chips by friction heat and then this bushing is threaded. Flow drill 2 Thread shaper Basic kit Suitable for steel, stainless steel, aluminium and non-ferrous metal Made of hard metal with polygon cut Precise for threads with gauge For standard fixtures The basic equipment includes all you need in order to be able to immediately work with the THERMDRILL Type "form" Type "cut" Thread shaper Basic kit With collar Without collar With TiN coating and oil grooves 6HX, shape C for MT 2 and MT 3 Size M 4 306 0104 306 0164 306 0184 306 0005 M 5 306 0105 306 0165 306 0185 M 6 306 0106 306 0166 306 0186 M 8 306 0108 306 0168 306 0188 M 10 306 0110 306 0170 306 0190 M 12 306 0112 306 0172 306 0192 1 x hook wrench and open-end wrench 4 x collets Ø 6/8/10/12 mm Reducing bush MT3-MT2 Lubricant Tool holder MT 3 Tool kits = Thermdrill + thread former Type "form" Type "cut" Size M 4 306 0024 306 0044 M 5 306 0025 306 0045 M 6 306 0026 306 0046 M 8 306 0028 306 0048 M 10 306 0030 306 0050 M 12 306 0032 306 0052 Recommended material thickness and speeds types Lubricant Paste for flow drilling (1 kg) including brush 306 0090 Thread moulder oil (1 litre) including brush 306 0092 Max. recommended material thickness [mm] for version "short" M 4 M 5 M 6 M 8 M 10 M 12 short long "form" 1.5 2.0 2.0 2.5 2.5 3.0 "cut" 2.0 3.0 3.0 4.0 4.0 4.5 For material which is thicker than indicated chose the Thermdrill version "long". For item No "S" replace by "L" 148 User video