perfect body banks for troube-free canmaking ines sitters and body bank transfer units Technoogy that keeps you ahead
Sitters body bank transfer systems and Sitters for high precision and fast output. When it comes to versatiity, precision, reiabiity and production speed, our sitters are second to none. In a typica canbody production ine, the sitter is the first stage in the manufacturing process. It cuts printed and acquered meta sheets into body banks of the required size. The addition of a bank stack transfer unit further increases the sitter s efficiency. They are extremey robust, faciitate simpe, swift adjustment to different bank formats and ensure exceptionay high precision. Body bank transfer systems pay a crucia roe in any fuy automated canbody production ine. Our automatic transfer units fufi the most stringent demands. Our transfer systems feed the bank magazine of the canbody weder with cut banks from the sitter. Thanks to its substantia reserve capacity for banks, the transfer unit can compensate for short upstream or downstream production interruptions, thus guaranteeing non-stop operation of the production ine. With a feeding capacity of up to 1500 banks per minute, our transfer systems are suitabe for a system ayouts and configurations.
OCSAM SGS 120 COMBINED GUILLOTINE/ rotary CUTTERS The idea sitter for aeroso and genera ine can producers. Competey automatic and instantaneous body bank height changeover Body bank ength changeover in just a few minutes Possibiity to store and reca hundreds of different sheet-cutting ayouts State-of-the-art technoogy such as inear motors, servo motors, high-speed hydrauics, touch-screen pane and a revoutionary wear and maintenancefree guiotine ram guide system Dupex TSN 211 sitter connected to TP 1001 GP bank transfer unit in a fuy integrated configuration. This integrated version is avaiabe for a TSN 211 connected to any TP/ TPM/TPM-S units. In this set-up both units are controed by a singe touch-screen pane.
SGS 120 guiotine/rotary sitter connected to an RAS-3 automatic bank stacker in a fuy integrated version. In this set-up both units are controed by a singe, extraarge touch-screen pane. 110 MK CAR dupex sitter connected to an REN-3 bank stacker. OCSAM TSN211 DUPLEX SLITTER The idea dupex sitter for any canmaking ine, a «must» for high-speed ines. State-of-the-art technoogy Maximum speed High-eve precision Outstanding efficiency Perfect handing of thinnest pate Strips handed by drop-bars or eectro-magnetic bars Fuy automatic synchronization between sheetfeeder / feeding bets / sheet centering device / drop bars (or eectro-magnets) and second tabe chains Possibiity to store and reca different sheet cutting ayouts
CEPAK 110 MK2 CAR / FFS DUPLEX SLITTER One of the most popuar dupex sitters in the market, suitabe for a types of canmaking ines. Traditiona sitter with one singe-drive motor and mechanica connection between first and second tabe Easy to operate and maintain Dependabe and sturdy Outstanding cutting accuracy and maximum efficiency Avaiabe in CAR version with back-squaring system and in second operation or in FFS version with front-finger system in second operation Can be connected to a types of manua and automatic stackers, and thus to any kind of automatic body bank transfer unit CEPAK 110 MK2/1 SINGLE SLITTER High precision, high-speed automatic singe sitter. Avaiabe for tinpate and/or auminum sheets Easy to operate and to maintain Outstanding cutting accuray and highest efficiency Dependabe and sturdy 110 MK2/1 singe sitter connected to an RAS-4 automatic strip stacker (aso avaiabe with driven or undriven outet conveyor).
technica data dupex sitters s.p.m. mm mm strips mm mm OCSAM TSN211 BSS 10 50 W 500 1180 0.12 0.40 (*) 1 7 140 600 (*) 56 1200 Back Squaring System L 600 1200 Ø 45 189 Left or right-hand version CEPAK 110 MK2 CAR 10 40 W 510 1160 0.12 0.40 (*) 2 6 (*) 165 485 (*) 68 1160 (*) Back Squaring System L 550 1120 Ø 52 155 Left-hand version CEPAK 110 MK2 FFS 10 40 W 510 1160 0.18 0.40 (*) 1 3 312 1160 80 1160 Front Finger System L 550 1120 Ø 99 370 Left-hand version SINGLE sitters s.p.m. mm mm strips mm CEPAK 110 MK2/1 10 50 W 510 1160 0.12 0.40 (*) 1 18 (*) 68 1160 (*) Singe Rotary Sitter L 550 1120 combined guiotine/rotary cutters sitter guiotine strokes mm mm mm mm OCSAM SGS 120 max 150/min W 480 1150 0.14 0.40 (*) 56 1150 45 550 450 1100 straight guiotine sitter guiotine strokes mm mm strip height OCSAM SGS 1 max 150/min W 480 1150 0.14 0.40 (*) 45 550 450 1100 (*) Variations or extended range upon request
technica data body bank transfer units (By bank Stacks) cyces/min mm mm height mm OCSAM TPM-S 4.0 max ( ) 140 520 (*) 75 300 (*) 75 max Left or right-hand version Ø 45 165 OCSAM TPM 2.5 max ( ) 140 520 (*) 75 300 (*) 75 max Left or right-hand version Ø 45 165 OCSAM TP 1001 (GP) 2.5 max ( ) 140 520 (*) 75 300 (*) 75 max Left or right-hand version Ø 45 165 body bank transfer units (BLANK BY BLANK) BLANKS/min mm mm CEPAK TX2/606 300 max 312 520 90 300 Left-hand version Ø 99 165 STRIP/BLANK STACKERS REN-3 RAS-3 RAS-4 DESCRIPTION Bank stacker with pneumatic ejection of the bank stacks Automatic bank stacker with hydrauic tabe. It stacks banks in mutipe rows: aowing to coect one fu paet of perfecty stacked banks Automatic stacker with or without hydrauic tabe. Suitabe for strips and banks. (*) Variations or extended range upon request ( ) 1 cyce = 1 bank stack transferred to the weder magazine ACCESSORIES Driven roer infeed patform Cutter grinder Digita measuring device for quick and precise setting of the cutters Lacquer margin contro device Magnetic trim remova device
body bank transfer units Stand-aone versions TPM-S The fastest, most advanced and fexibe transfer unit Custom executions to match any ine ayout Abe to feed simutaneousy two weders running the same bank size (see picture) TPM The upgraded body bank transfer unit featuring: Buit-in bank stack over-turning or nonover-turning options Pivoting transfer arm Rotating pincer to match any ine ayout Touch-screen pane on pivoting arm TP1001 (GP) The basic body bank transfer unit Inexpensive and effective Bank stack over-turning or non-overturning options buit-in (GP version) This unit requires the sitter to be «straight-in-ine» with the weder Ocsam Cepak s.r.. Via Luciano Lama 6 42049 Caerno (RE) Itay Phone +39 0522 474007 E-Mai ocsam@soudronic.com www.ocsam-cepak.com Subject to modification E 10.16, printed in Switzerand Copyright by Ocsam Cepak s.r.., Caerno, Itay and Soudronic AG, Bergdietikon, Switzerand