Pressure relief valve DHV 7R set range: 0,3 0,0 bar Benefits pressure setting possible at any time, also during operation optimum monitoring valves high reproducibility of the set pressure high level of operating safety and long service life constant, low vibration control lowmaintenance can be easily connected to the pipework by proven technologies solvent or fusion welding radial removal is possible even after installation low pressure increase until the valve is fully opened reliable diaphragm fastening with standard stainless steel screws considerably shortened facetoface dimension with injection moulded threaded neck according to DIN 03 metal inserts in the valve housing allow the valves to be directly fitted to mounting sets, the movability of the union nuts on the valves made of, PP and remains unaffected suitable for oscillating pumps Application chemical plants industrial plants water treatment Intended Use The pressure relief valve which is directly controlled by the medium, is used in technical processing plants for keeping preset working pressures constant on the primary side. The pressure relief valve 7R, specially designed for dosing technology, is used for ensuring constant dosing quantities in conjunction with oscillating pumps. In the event of any counterpressure on the secondary side, the admission pressure and thus the dosing quantity remain constant. not suitable for equipment with safety function according to the Pressure Equipment Directive. Valve Function If the working or inlet pressure rises above the set value, the pressurized valve piston is lifted against the spring force. The valve opens and a pressure relief on the secondary side (outlet side) takes place. The valve closes as soon as the working pressure at the valve piston is lower than the set spring preload. When in the case of the dynamic flow valve with set working pressure, counter pressure is generated on the outlet side, this pressure acts simultaneously underneath the active area of the diaphragm and on the loosely guided valve piston, i.e. the forces under the diaphragm surface and the piston cancel each other out. The valve lift and thus the working pressure remain virtually constant. Valve Setting Set or adjust the desired or permissible working pressure at the adjustment screw with the aid of pressure gauges (ASV diaphragm pressure gauge guard, type MDM 90) in the pipe system after removing the. The adjustment screw is secured by a counter nut and can be sealed against unauthorized adjustment, if necessary. Classification Of The Identification Number refer table on page 7 Application Media Technically pure, neutral and aggressive fluids, provided that the selected valve materials coming into contact with the media are resistant at the operating temperature according to the ASVresistance guide. For nitric acid or sulfuric acid please specify the precise operating conditions of the application. Fluid Temperature see pressure/temperature diagram Operating Pressure see pressure/temperature diagram Size DN 0 DN 50 Set Range 0.3 0.0 bar Nominal Pressure (H O, 0 C) PN 0 Working Pressure set pressure plus flow dependent pressure increase (see characteristic curves): approx. 0.3 0.0 bar Deviation From The Working Pressure up to 5 bar counterpressure: approx. ±0.3 bar over 5 bar counterpressure: approx. ±0.5 bar Opening Pressure approx. 0.3 0.5 bar Hysteresis Difference between opening and closing pressure approx. 0.3 bar > data sheet no.: 3305 03/0/ ASVStübbe GmbH & Co. KG Hollwieser Str. 5 D30 Vlotho Tel. +9(0)5733. 7990 Fax +9(0)5733. 7995000 contact@asvstuebbe.de www.asvstuebbe.de
Valve Body PP PTFE carbon fibre reinforced stainless steel.57 (VA) Bonnet PP, glass fibre reinforced Piston PP PTFE piston for the media to permeation (penetration) tilt (such as HF, HCl, HNO3). Sealing PTFE Diaphragm PTFE ( diaphragm with PTFE coating on the surfaces coming into contact with the medium) PTFE membrane with ECTFE film for media (such as HF, HCl, HNO3) for the permeation (penetration) tilt. Screws stainless steel (.30) Actuation medium controlled Connection refer comments on the identification numbers Flow Direction always in the direction of the arrow Mounting Position as required Fastening via threaded inserts (metal inserts) in the valve body Colour valve body:, grey, RAL 70 valve body: PP, grey, RAL 703 valve body:, opaque, yellowishwhite bonnet: orange, RAL 00 valve body: PTFE, black valve body: stainless steel, unpainted Pressure Gauge Connection see»version with threaded holes for pressure gauge mounting«> data sheet no.: 3305 03/0/ ASVStübbe GmbH & Co. KG Hollwieser Str. 5 D30 Vlotho Tel. +9(0)5733. 7990 Fax +9(0)5733. 7995000 contact@asvstuebbe.de www.asvstuebbe.de
Pressure relief valve DHV 7R Pressure/temperature diagram Pressure/temperature diagram P = operating pressure T = temperature The pressure/temperature limits are applicable for the stated nominal pressures and a computed operating life factor of 5 years. These are standard values for harmless media (DIN 03), to which the valve material is resistant. For other media please refer to the ASV resistance guide. The durability of wear parts depends on the operating conditions of the application. For temperatures below 0 C (PP < +0 C) please specify the precise operating conditions of the application. The rated pressure depends on the valve size and material. For the corresponding rated pressure value of the valve, please refer to the»order table«. P = operating pressure T = temperature The pressure/temperature limits are applicable for the stated nominal pressures and a computed operating life factor of 5 years. These are standard values for harmless media (DIN 03), to which the valve material is resistant. For other media please refer to the ASV resistance guide. The durability of wear parts depends on the operating conditions of the application. For temperatures below 0 C (PP < +0 C) please specify the precise operating conditions of the application. The rated pressure depends on the valve size and material. For the corresponding rated pressure value of the valve, please refer to the»order table«. > data sheet no.: 3305 03/0/ ASVStübbe GmbH & Co. KG Hollwieser Str. 5 D30 Vlotho Tel. +9(0)5733. 7990 Fax +9(0)5733. 7995000 contact@asvstuebbe.de www.asvstuebbe.de 3
Pressure relief valve DHV 7R Pressure loss curve (standard values for H O, 0 C) Pressure loss curve (standard values for H O, 0 C) P = pressure loss Q = flow pressure loss and k v value The diagram shows the pressure loss P in relation to the flow Q. Conversion aid: c v = k v x 0.07; f v = k v x 0.055 Units: k v [l/min]; c v [gal/min] US; f v [gal/min] GB P = pressure loss Q = flow pressure loss and k v value The diagram shows the pressure loss P in relation to the flow Q. Conversion aid: c v = k v x 0.07; f v = k v x 0.055 Units: k v [l/min]; c v [gal/min] US; f v [gal/min] GB > data sheet no.: 3305 03/0/ ASVStübbe GmbH & Co. KG Hollwieser Str. 5 D30 Vlotho Tel. +9(0)5733. 7990 Fax +9(0)5733. 7995000 contact@asvstuebbe.de www.asvstuebbe.de
Pressure relief valve DHV 7R Operating behaviour pe = set Pressure pa = working pressure pö = opening pressure ps = closing pressure pö ps = hystersis pe pa = flow dependent pressure reduction Q = flow Sectional drawing DHV 7R DHV 7R with pressure gauge A = primary side B = secondary side = = adjustment screw 3 = counter nut = piston 5= diaphragm = flat sealing ring 7 = valve seat The pressure relief valve can be factory fitted with a pressure gauge for neutral media. The resistance of the pressure gauge material has to be taken into consideration for other media. > data sheet no.: 3305 03/0/ ASVStübbe GmbH & Co. KG Hollwieser Str. 5 D30 Vlotho Tel. +9(0)5733. 7990 Fax +9(0)5733. 7995000 contact@asvstuebbe.de www.asvstuebbe.de 5
Pressure relief valve DHV 7R Applications for Pressure Relief Valve Example : Constant system pressure Applications for Pressure Relief Valve Example 3: Pressure relief valve as backflow preventer X = valve opens Y = valve closed pa = working pressure pp = pump pressure pö = opening pressure Applications for Pressure Relief Valve Example : Consumer and/or opens, pressure relief valve closes X = valve opens Y = valve closed pmax = max. pressure pp = pump pressure pö = opening pressure Applications for Pressure Relief Valve Example : Pressure relief valve as overflow valve:the container pressure or system must not exceed the max. pressure value X = valve opens Y = valve closed pa = working pressure pp = pump pressure pö = opening pressure X = valve opens Y = valve closed pa = working pressure pp = pump pressure pö = opening pressure > data sheet no.: 3305 03/0/ ASVStübbe GmbH & Co. KG Hollwieser Str. 5 D30 Vlotho Tel. +9(0)5733. 7990 Fax +9(0)5733. 7995000 contact@asvstuebbe.de www.asvstuebbe.de
Pressure relief valve DHV 7R Malfunctions, possible causes, rectification Maintenance note Screw tightening torque (Nm) The specified values apply to lubricated screws. Check the tightening torque of the body screws at certain intervals in case of setting of the diaphragms and/or temperature fluctuations. Ident code Settingrange and option A = standard ident no. ( digits) B = ident code for settingrange C = ident code for»washed free of silicone«a = ident code»0«not washed free of silicone b = Ident code»«washed free of silicone example c = ident no. / setting = 0,5 bar / not washed free of silicone example d = ident no. / setting =,0 bar / not washed free of silicone example e = ident no. / setting = 0 bar / washed free of silicone > data sheet no.: 3305 03/0/ ASVStübbe GmbH & Co. KG Hollwieser Str. 5 D30 Vlotho Tel. +9(0)5733. 7990 Fax +9(0)5733. 7995000 contact@asvstuebbe.de www.asvstuebbe.de 7
Pressure relief valve DHV 7R Operating note Safe operation of the valve can only be ensured if it is properly installed, operated, serviced or repaired by qualified personnel according to its intended use while observing the accident prevention regulations, safety regulations, relevant standards, directives/technical regulations or codes of practice such as e.g. DIN, DIN EN, DIN ISO and DVS*. *DVS = German Welding Society The intended use includes adhering to specified limit values for pressure and temperature, as well as checking the resistance. This requires all components coming into contact with the medium to be "resistant" in accordance with the ASV resistance guide. Pressure gauge version If the valve body is equipped with a pressure gauge, do not tighten the pressure gauge with more than max. 3 Nm. Please take into account that the material PTFE is classified as resistant against many media, however, PTFE is not diffusion tight when used as a film, e.g. for the ASV membranes. Please contact us for limit cases (nitric acid or sulfuric acid). > data sheet no.: 3305 03/0/ ASVStübbe GmbH & Co. KG Hollwieser Str. 5 D30 Vlotho Tel. +9(0)5733. 7990 Fax +9(0)5733. 7995000 contact@asvstuebbe.de www.asvstuebbe.de
Pressure relief valve DHV 7R, Standard body size d(mm) 0 5 3 0 50 3 pressure range DN(mm) 0 5 0 5 3 0 50 DN(inch) 3/ / 3/ / / PN(bar) 0 0 0 0 0 0 0 version standard standard standard standard standard standard standard Connection sealing ident No. 350 35 35 353 35 355 35 socket end DIN ISO 3 37 3 39 370 37 37 spigot end FIX DIN ISO 0.0 kg 9 50 0.0 kg 0.5 kg 95 5 0.5 kg. kg 9 5. kg.90 kg 97 53.90 kg 9 5 5.0 kg 99 55 5.0 kg 5.0 kg 500 5 7 9 50 5 5 threaded sockets Rp 5 55 5 57 5 59 0 0.0 kg 0.5 kg 3 33 3 35 3 37 3 socket end ANSI 39 399 00 0 0 03 0 0.0 kg 0.5 kg 5 7 9 0 socket end BS 3 5 7 0.0 kg 0.5 kg 30 3 3 33 3 35 3 socket end JIS 3 39 0 3 0.0 kg 0.5 kg A.57 7 79 0 3 threaded sockets Rp 7 9 90 9 9 0.5 kg 0.9 kg GFR 5 57 5 59 530 53 flange DIN EN 09 50 5 5 53 5 55.0 kg PP / steel 55 555 55 557 55 559 flange ANSI 5 59 570 57 57 573.33 kg PE 3 5 7 spigot end DIN ISO 7 7 73 7 75 7 0.5 kg. kg. kg. kg. kg.00 kg. kg. kg. kg.90 kg.90 kg.90 kg.90 kg.09 kg. kg. kg.90 kg 5. kg 5. kg.0 kg 5.0 kg 5.0 kg 5.0 kg 5.0 kg 5. kg 5.5 kg.3 kg 5.0 kg 5.0 kg 5.0 kg 5.0 kg 5.0 kg 5.0 kg. kg. kg 7.00 kg 5.0 kg > data sheet no.: 3305 03/0/ ASVStübbe GmbH & Co. KG Hollwieser Str. 5 D30 Vlotho Tel. +9(0)5733. 7990 Fax +9(0)5733. 7995000 contact@asvstuebbe.de www.asvstuebbe.de 9
Pressure relief valve DHV 7R, Standard body PP size d(mm) 0 5 3 0 50 3 pressure range DN(mm) 0 5 0 5 3 0 50 DN(inch) 3/ / 3/ / / PN(bar) 0 0 0 0 0 0 0 version standard standard standard standard standard standard standard Connection sealing ident No. PP 3 5 7 spigot end DIN ISO 9 0 3 PP spigot end FIX DIN ISO 3 0.7 kg 0.7 kg 7 35 0.7 kg.57 kg 3.57 kg. kg 9 37. kg.0 kg 30 3.0 kg. kg 3 39. kg. kg 3 0 PP 59 599 00 0 0 03 threaded sockets Rp 05 0 07 0 09 0 0.7 kg GFR 3 5 7 flange DIN EN 09 9 50 5 5 53 5 0.9 kg PP / steel 5 57 5 59 0 flange ANSI 3 5 7.0 kg PP 5 53 5 55 5 57 5 socket end DIN ISO 590 59 59 593 59 595 59 0.7 kg 0.7 kg.57 kg.9 kg.0 kg.57 kg. kg.0 kg.55 kg. kg.0 kg.9 kg 5. kg.0 kg. kg.9 kg 5. kg. kg. kg. kg 5. kg.07 kg. kg 0 > data sheet no.: 3305 03/0/ ASVStübbe GmbH & Co. KG Hollwieser Str. 5 D30 Vlotho Tel. +9(0)5733. 7990 Fax +9(0)5733. 7995000 contact@asvstuebbe.de www.asvstuebbe.de
Pressure relief valve DHV 7R, Standard body size d(mm) 0 5 3 0 50 3 pressure range DN(mm) 0 5 0 5 3 0 50 DN(inch) 3/ / 3/ / / PN(bar) 0 0 0 0 0 0 0 version standard standard standard standard standard standard standard Connection sealing ident No. socket end DIN ISO spigot end DIN ISO spigot end FIX DIN ISO PP / steel flange ANSI PP / steel flange DIN EN 09 70.0 kg 700.07 kg 7.07 kg.07 kg 70.07 kg 730.5 kg 7. kg 7. kg 7. kg 70. kg 73.7 kg 77.5 kg 73.5 kg.5 kg 703.5 kg 73 3.5 kg 7 3. kg 7 5.5 kg 9 5.5 kg 70 5.5 kg 733.7 kg 79.99 kg 75 5.55 kg 90 5.55 kg 705 5.55 kg 73. kg 70 7.35 kg 7 5.5 kg 9 5.5 kg 70 5.5 kg 735 7. kg 7 7.7 kg body PTFE size d(mm) 0 5 3 0 50 3 pressure range DN(mm) 0 5 0 5 3 0 50 DN(inch) 3/ / 3/ / / PN(bar) 0 0 0 0 0 0 0 version standard standard standard standard standard standard standard Connection sealing ident No. PTFE threaded neck G PTFE 7.00 kg 75.00 kg 7.0 kg 77.0 kg 7 5.0 kg 79 5.0 kg 750 5.0 kg > data sheet no.: 3305 03/0/ ASVStübbe GmbH & Co. KG Hollwieser Str. 5 D30 Vlotho Tel. +9(0)5733. 7990 Fax +9(0)5733. 7995000 contact@asvstuebbe.de www.asvstuebbe.de
Pressure relief valve DHV 7R, Standard body A.57 size d(mm) 0 5 3 0 50 3 pressure range DN(mm) 0 5 0 5 3 0 50 DN(inch) 3/ / 3/ / / PN(bar) 0 0 0 0 0 0 0 version standard standard standard standard standard standard standard Connection sealing ident No. A.57 threaded neck G PTFE 75.00 kg 753.0 kg 75.0 kg 755.0 kg 75.0 kg 757.0 kg 75. kg > data sheet no.: 3305 03/0/ ASVStübbe GmbH & Co. KG Hollwieser Str. 5 D30 Vlotho Tel. +9(0)5733. 7990 Fax +9(0)5733. 7995000 contact@asvstuebbe.de www.asvstuebbe.de
Pressure relief valve DHV 7R, Standard dimensions d(mm) DN(mm) DN(inch) version 0 5 3 0 50 3 0 5 0 5 3 0 50 3/ / 3/ / / standard standard standard standard standard standard standard dimensions(mm) d M G Rp.57/PTFE H PP// H.57/PTFE h PP// h L PP L L L.57/PTFE L PP// L PP L3 PP L3 L3 socket end DIN ISO L3 threaded sockets Rp L3 L3 ANSI L3 BS t L PP/ b GFR PP// b PP / steel b N.57 V PP/PTFE//V 3/ 3/ 73 7 0 5 0 0 9 7 3 0 0 / 73 7 0 5 50 30 5 0 0 5 3 3 0 5 / 3/ 0 0 5 3 0 30 50 50 5 5 5 5 5 5 0 5 5 9 7 3.5 07 3 / 0 0 5 3 0 70 30 7 50 50 5 5 5 5 5 5 59 5 7 5 5.5 07 0 / 37 5 30 33 395 3 05 0 09 7 7 7.5 7 5 5 50 / / 37 5 30 33 395 37 05 0 09 3 7 7.5 7 5 5 3 3/ 37 5 50 33 395 333 05 0 09 3 9 3 9 7 5 5 > data sheet no.: 3305 03/0/ ASVStübbe GmbH & Co. KG Hollwieser Str. 5 D30 Vlotho Tel. +9(0)5733. 7990 Fax +9(0)5733. 7995000 contact@asvstuebbe.de www.asvstuebbe.de 3
Pressure relief valve DHV 7R, Pressure gauge version Version For Pressure Gauge Installation version with x threaded hole G /" for pressure gauge connection body size d(mm) 0 5 3 0 50 3 pressure range DN(mm) 0 5 0 5 3 0 50 DN(inch) 3/ / 3/ / / PN(bar) 0 0 0 0 0 0 0 Connection sealing ident No. socket end DIN ISO spigot end FIX DIN ISO socket end ANSI GFR flange DIN EN 09 PP / steel flange ANSI 35 0.0 kg 50 0.0 kg 390 0.0 kg 359 0.5 kg 503 0.5 kg 39 0.5 kg 533.0 kg 5.33 kg 30. kg 50. kg 39. kg 53. kg 5. kg 3.90 kg 505.90 kg 393.90 kg 535. kg 53. kg 3 50 39 53 5. kg 5.0 kg 33 5.0 kg 507 5.0 kg 395 5.0 kg 537 5.5 kg 55.3 kg 3 5.0 kg 50 5.0 kg 39 5.0 kg 53. kg 5 7.00 kg > data sheet no.: 3305 03/0/ ASVStübbe GmbH & Co. KG Hollwieser Str. 5 D30 Vlotho Tel. +9(0)5733. 7990 Fax +9(0)5733. 7995000 contact@asvstuebbe.de www.asvstuebbe.de
Pressure relief valve DHV 7R, Pressure gauge version dimensions d(mm) DN(mm) DN(inch) 0 3/ 0 5 / 5 0 3/ 3 5 0 3 / 50 0 / 3 50 dimensions(mm) GFR PP / steel d M H h L L L L3 L3 ANSI t L b b N V 7 5 0 0 0 7 5 50 0 3 0 5 0 3 0 7 50 5 5 9 7 3 07 3 0 3 0 7 50 5 5 7 5 07 0 5 30 0 7 7 5 50 5 30 0 3 7 7 5 3 5 50 0 3 7 5 > data sheet no.: 3305 03/0/ ASVStübbe GmbH & Co. KG Hollwieser Str. 5 D30 Vlotho Tel. +9(0)5733. 7990 Fax +9(0)5733. 7995000 contact@asvstuebbe.de www.asvstuebbe.de 5
Pressure relief valve DHV 7R, Special Version Special Version for media (such as HF, HCl, HNO3) for the permeation (penetration) tilt. piston PTFE PTFEMembrane with ECTFE film body size d(mm) 0 5 3 0 50 3 pressure range DN(mm) 0 5 0 5 3 0 50 DN(inch) 3/ / 3/ / / PN(bar) 0 0 0 0 0 0 0 Connection sealing ident No. socket end DIN ISO spigot end FIX DIN ISO socket end ANSI GFR flange DIN EN 09 PP / steel flange ANSI 37 0.0 kg 5 0.0 kg 0 0.0 kg 375 0.5 kg 59 0.5 kg 07 0.5 kg 57.0 kg 575.33 kg 37. kg 50. kg 0. kg 5. kg 57. kg 377.90 kg 5.90 kg 09.90 kg 59. kg 577. kg 37 5 0 550 5. kg 57.0 kg 379 5.0 kg 53 5.0 kg 5.0 kg 55 5.5 kg 579.3 kg 30 5.0 kg 5 5.0 kg 5.0 kg 55. kg 50 7.00 kg > data sheet no.: 3305 03/0/ ASVStübbe GmbH & Co. KG Hollwieser Str. 5 D30 Vlotho Tel. +9(0)5733. 7990 Fax +9(0)5733. 7995000 contact@asvstuebbe.de www.asvstuebbe.de
Pressure relief valve DHV 7R, Special Version body size d(mm) 0 5 3 0 50 3 pressure range DN(mm) 0 5 0 5 3 0 50 DN(inch) 3/ / 3/ / / PN(bar) 0 0 0 0 0 0 0 Connection sealing ident No. socket end DIN ISO spigot end DIN ISO spigot end FIX DIN ISO PP / steel flange ANSI PP / steel flange DIN EN 09 7.0 kg 70.0 kg 79.07 kg 93.07 kg 709.07 kg 737.5 kg 73. kg 0. kg 9. kg 70. kg 73.7 kg 7.5 kg.5 kg 95.5 kg 7.5 kg 739 3.5 kg 75 3. kg 5.5 kg 9 5.5 kg 7 5.5 kg 70.7 kg 7.99 kg 3 5.55 kg 97 5.55 kg 73 5.55 kg 7. kg 77 7.35 kg 5.5 kg 9 5.5 kg 7 5.5 kg 7 7. kg 7 7.7 kg > data sheet no.: 3305 03/0/ ASVStübbe GmbH & Co. KG Hollwieser Str. 5 D30 Vlotho Tel. +9(0)5733. 7990 Fax +9(0)5733. 7995000 contact@asvstuebbe.de www.asvstuebbe.de 7
Pressure relief valve DHV 7R, Special Version dimensions d(mm) DN(mm) DN(inch) 0 3/ 0 5 / 5 0 3/ 3 5 0 3 / 50 0 / 3 50 dimensions(mm) GFR / PP / steel d M H h L L L L L L3 L3 L3 ANSI t L b b b N V 7 5 0 9 7 0 0 7 5 50 5 0 9 5 3 3 0 5 0 3 0 7 50 9 5 5 5 9 7 3.5 07 3 0 3 0 7 7 50 9 5 5 5 7 5 5.5 07 0 5 30 3 0 03 09 7 7.5 7 5 50 5 30 37 0 03 09 3 7 7.5 7 5 3 5 50 333 0 03 09 3 9 7 5 > data sheet no.: 3305 03/0/ ASVStübbe GmbH & Co. KG Hollwieser Str. 5 D30 Vlotho Tel. +9(0)5733. 7990 Fax +9(0)5733. 7995000 contact@asvstuebbe.de www.asvstuebbe.de
Pressure relief valve DHV 7R Item Overview DHV 7R,, PP, DN 0 DN 5 DHV 7R, PP, DN 0 DN 50 position 3 5 7 9 0. 3 5 7 7.5 3 5 7 quantity designation valve body bonnet separating disc pressure disc diaphragm pressure plate spring plate pressure spring steel ball piston, complete counter nut flat sealing ring hexagon nut washer washer Oring union end union nut Plug position 3 5 7 9 0. 3 5 7 7.5 3 5 quantity designation valve body bonnet separating disc pressure disc diaphragm pressure plate spring plate pressure spring steel ball piston, complete counter nut flat sealing ring hexagon nut washer washer Oring union end union nut > data sheet no.: 3305 03/0/ ASVStübbe GmbH & Co. KG Hollwieser Str. 5 D30 Vlotho Tel. +9(0)5733. 7990 Fax +9(0)5733. 7995000 contact@asvstuebbe.de www.asvstuebbe.de 9
Pressure relief valve DHV 7R DHV 7R PTFE DN 0 DN 5 DHV 7R PTFE DN 0 DN 50 position 3 5 7 9 0. 0. 0.3 3 5 7 7.. 3 5 7 quantity designation valve body bonnet separating disc pressure disc diaphragm pressure plate spring plate pressure spring steel ball piston piston point flat sealing ring counter nut flat sealing ring hexagon nut washer washer Oring union end union nut Plug position 3 5 7 9 0. 0. 3 5 7 7.. 3 5 7 quantity designation valve body bonnet separating disc pressure disc diaphragm pressure plate spring plate pressure spring steel ball piston piston point counter nut flat sealing ring hexagon nut washer washer Oring union end union nut Plug 0 > data sheet no.: 3305 03/0/ ASVStübbe GmbH & Co. KG Hollwieser Str. 5 D30 Vlotho Tel. +9(0)5733. 7990 Fax +9(0)5733. 7995000 contact@asvstuebbe.de www.asvstuebbe.de
Pressure relief valve DHV 7R stainless steel.57 DN 0 DN 5 stainless steel.57 DN 0 DN 50 position 3 5 7 9 0. 0. 0.3 3 quantity designation valve body bonnet separating disc pressure disc diaphragm pressure plate spring plate pressure spring steel ball piston piston point flat sealing ring counter nut washer Oring position 3 5 7 9 0. 0. 0.3 3 quantity designation valve body bonnet separating disc pressure disc diaphragm pressure plate spring plate pressure spring steel ball piston piston point flat sealing ring counter nut washer Oring > data sheet no.: 3305 03/0/ ASVStübbe GmbH & Co. KG Hollwieser Str. 5 D30 Vlotho Tel. +9(0)5733. 7990 Fax +9(0)5733. 7995000 contact@asvstuebbe.de www.asvstuebbe.de
Pressure relief valve DHV 7R Characteristic curves Configuration example The valve is set tight at 5 bar. A flow of approx. 000 l/h is reached at a pressure increase of bar. According to the curve, this results in the following values: set pressure pe: 5 bar; working pressure pa: bar; opening pressure pö: 5.5 bar; closing pressure ps: 5. bar DN 0 DN 0 pa = working pressure Q = flow DN 5 pa = working pressure Q = flow DN 5 pa = working pressure Q = flow pa = working pressure Q = flow > data sheet no.: 3305 03/0/ ASVStübbe GmbH & Co. KG Hollwieser Str. 5 D30 Vlotho Tel. +9(0)5733. 7990 Fax +9(0)5733. 7995000 contact@asvstuebbe.de www.asvstuebbe.de
Pressure relief valve DHV 7R DN 3 pa = working pressure Q = flow DN 0 pa = working pressure Q = flow DN 50 pa = working pressure Q = flow > data sheet no.: 3305 03/0/ ASVStübbe GmbH & Co. KG Hollwieser Str. 5 D30 Vlotho Tel. +9(0)5733. 7990 Fax +9(0)5733. 7995000 contact@asvstuebbe.de www.asvstuebbe.de 3
Pressure relief valve DHV 7R > data sheet no.: 3305 03/0/ ASVStübbe GmbH & Co. KG Hollwieser Str. 5 D30 Vlotho Tel. +9(0)5733. 7990 Fax +9(0)5733. 7995000 contact@asvstuebbe.de www.asvstuebbe.de