Group 0K High Pressure Fittings Tubing Nipples Adaptors
INEX Page ontents 2 Index 3 0K Fittings NPT-NPT 4 0K Fittings JI-JI, JI - NPT 5 X-Overs - HP Fittings / Male Threads -8 High Pressure Fitting and Tubing Low Pressure 9-0 Low Pressure Tubing -4 High Pressure Fittings and Tubing Medium Pressure 5- Medium Pressure Tubing 7 Medium Pressure oned-and-threaded Nipples 8-22 High Pressure Fittings and Tubing High Pressure 23-24 High Pressure Tubing 25 High Pressure oned-and-threaded Nipples We have certified industrial plumbers with offshore certificates. Ask us about pipe work. We are certified and have experience in: Metric IN Fittings (standard IN fittings), Flare Fittings, A-lok and High Pressure ouplings. We also have equipment and machinery for hire. On our website you will find the complete High Pressure ouplings catalogue. - 2 Flexible Solutions
0K FITTINGS 0 000 PSI NPT - NPT Material Quality: AISI stainless steel. Material certificate according to IN 500049. 3... Other material qualities available on request. STAINLESS STEEL STEEL NPT - NPT Thread Thread 2 Nipple Socket Nipple Socket Plug ap /8 /8 HN0K-0202 H0K-0202 FMA0K-0202 HP0K-02 P0K-02 /8 HN0K-0204 H0K-0204 FMA0K-0204 /8 FMA0K-0402 HN0K-0404 H0K-0404 FMA0K-0404 HP0K-04 P0K-04 HN0K-040 H0K-040 FMA0K-040 /2 HN0K-0408 H0K-0408 FMA0K-0408 FMA0K-004 HN0K-00 H0K-00 FMA0K-00 HP0K-0 P0K-0 /2 HN0K-008 H0K-008 FMA0K-008 /2 FMA0K-0804 /2 FMA0K-080 /2 /2 HN0K-0808 H0K-0808 FMA0K-0808 HP0K-08 P0K-08 /2 3/4 HN0K-082 H0K-082 FMA0K-082 /2 HN0K-08 H0K-08 FMA0K-08 3/4 /2 FMA0K-208 3/4 3/4 HN0K-22 H0K-22 FMA0K-22 HP0K-2 P0K-2 3/4 HN0K-2 H0K-2 FMA0K-2 /2 FMA0K-08 3/4 FMA0K-2 HN0K- H0K- FMA0K- HP0K- P0K- NPT - NPT Thread Thread 2 Elbow 90 o Female Elbow 90 o Male Elbow 90 o Male/Female Tee Female /8 /8 FE0K-0202 ME0K-0202 FME0K-0202 FT0K-02 MT0K-02 FE0K-0404 ME0K-0404 FME0K-0404 FT0K-04 MT0K-04 FE0K-00 ME0K-00 FME0K-00 FT0K-0 MT0K-0 /2 /2 FE0K-0808 ME0K-0808 FME0K-0808 FT0K-08 MT0K-08 Tee Male Safety factor: 4: www.fluidcontrol.no - 3
0K FITTINGS 0 000 PSI JI - JI, JI - NPT JI - JI Thread Thread 2 Nipple Elbow 90 o Male ap Plug 7/-20 7/-20 JHN0K-0404 JME0K-0404 JP0K-0404 JHP0K-0404 JFFS0K-0404 7/-20 9/-8 JFFS0K-040 7/-20 3/4- JFFS0K-0408 /2-20 /2-20 JHN0K-0505 JME0K-0505 JP0K-0505 JHP0K-0505 JFFS0K-0505 9/-8 9/-8 JHN0K-00 JME0K-00 JP0K-00 JHP0K-00 JFFS0K-00 9/-8 3/4- JFFS0K-008 9/-8 7/8-4 JFFS0K-00 9/-8./-2 JFFS0K-02 3/4-3/4- JHN0K-0808 JME0K-0808 JP0K-0808 JHP0K-0808 JFFS0K-0808 7/8-4 7/8-4 JHN0K-00 JME0K-00 JP0K-00 JHP0K-00./-2./-2 JHN0K-22 JME0K-22 JP0K-22 JHP0K-22.5/-2.5/-2 JHN0K- JME0K- JP0K- JHP0K- JI - NPT Thread Thread 2 Nipple Elbow 90 o Male Swivel Nipple 7/-20 /8 NJHN0K-0402 NJME0K-0402 NJMFS0K-0402 7/-20 NJHN0K-0404 NJME0K-0404 NJMFS0K-0404 7/-20 NJHN0K-040 NJME0K-040 NJMFS0K-040 /2-20 NJHN0K-0504 NJME0K-0504 NJMFS0K-0504 9/-8 NJHN0K-004 NJME0K-004 NJMFS0K-004 9/-8 NJHN0K-00 NJME0K-00 NJMFS0K-00 9/-8 /2 NJHN0K-008 NJME0K-008 NJMFS0K-008 3/4- NJHN0K-080 NJME0K-080 NJMFS0K-080 3/4- /2 NJHN0K-0808 NJME0K-0808 NJMFS0K-0808 3/4-3/4 NJHN0K-082 NJME0K-082 NJMFS0K-082 7/8-4 /2 NJHN0K-008 NJME0K-008 NJMFS0K-008 7/8-4 3/4 NJHN0K-02 NJME0K-02 NJMFS0K-02-4 Flexible Solutions
X-OVERS - HP FITTINGS / MALE THREAS X-OVERS - HP FITTINGS / MALE THREAS Thread High Pressure ouplings Thread 2 ( article description) Part No. Special Transition Nipples 7/ AS-244 Medium Pressure High Pressure ouplings x JI male / male adapter 9/ AS-24 Medium Pressure High Pressure ouplings x JI male / male adapter 7/ AS-24 Medium Pressure High Pressure ouplings x JI male / male adapter 9/ AS-2 Medium Pressure High Pressure ouplings x JI male / male adapter 9/ 7/ AS-294 Medium Pressure High Pressure ouplings x JI male / male adapter 9/ 9/ AS-29 Medium Pressure High Pressure ouplings x JI male / male adapter AS-344 Medium Pressure High Pressure ouplings x SP male / male adapter AS-34 Medium Pressure High Pressure ouplings x SP male / male adapter AS-34 Medium Pressure High Pressure ouplings x SP male / male adapter AS-3 Medium Pressure High Pressure ouplings x SP male / male adapter 9/ AS-394 Medium Pressure High Pressure ouplings x SP male / male adapter 9/ AS-39 Medium Pressure High Pressure ouplings x SP male / male adapter AS-444 Medium Pressure High Pressure ouplings x NPT male / male adapter AS-44 Medium Pressure High Pressure ouplings x NPT male / male adapter AS-44 Medium Pressure High Pressure ouplings x NPT male / male adapter AS-4 Medium Pressure High Pressure ouplings x NPT male / male adapter 9/ AS-494 Medium Pressure High Pressure ouplings x NPT male / male adapter 9/ AS-49 Medium Pressure High Pressure ouplings x NPT male / male adapter 7/ AS-9244 High pressure High Pressure ouplings x JI male / male adapter 7/ AS-924 High pressure High Pressure ouplings x JI male / male adapter 9/ AS-92 High pressure High Pressure ouplings x JI male / male adapter AS-9344 High pressure High Pressure ouplings x SP male / male adapter AS-934 High pressure High Pressure ouplings x SP male / male adapter Other dimensions and thread types on request. www.fluidcontrol.no - 5
HIGH PRESSURE FITTINGS AN TUING LOW PRESSURE HIGH PRESSURE FITTINGS AN TUING LOW PRESSURE Pressures to psi (034 bar) Since 945 Autoclave Engineers has designed and built premium quality valves, fittings and tubing. This commitment to engineering and manufacturing excellence has earned Autoclave a reputation for reliable, efficient product performance. Autoclave Engineers has long been established as the world leader in high pressure fluid handling components for the chemical/petrochemical,research, and oil and gas industries. Low Pressure Fittings and Tubing Features: Single-ferrule compression sleeve. Fast easy make-up of connection. Available sizes are /, /8,,, & /2. Fittings manufactured from cold worked stainless steel. Tubing is manufactured from dual rated /L and 304/304L annealed stainless steel. All items available in special materials. Operating temperatures from -00 F (-73 ) to 50 F (343 ). Molybdenum disulfide-coated gland nuts to prevent galling. The Low Pressure Series uses Autoclave s Speedite connection. This single-ferrule compression sleeve connection delivers fast, easy makeup and reliable bubble-tight performance, in liquid or gas service. Autoclave Engineers Low Pressure Fittings are designed for use with low pressure valves and tubing. These fittings feature improved Speedite compression connections with larger orifices for excellent flow capabilities. Autoclave fittings and components are manufactured of cold-worked type stainless steel. Optional materials are available upon request. onnection omponents All valves and fittings are supplied complete with appropriate glands and compression sleeves. To order these components separately, use order numbers listed. When using plug, sleeve is not required. Gland SMN ( ) Sleeve SSL ( ) When ordering glands separately for 0V Series and valves, substitute 0N for SMN. / tubing system components are available in the minifitting series. / tubing components can be used in 0V Series valves and fittings if required. onsult factory for information on / tubing assembly in /8 tubing components. Plug SP ( ) Add tube size ( ) /8-20 - 40-0 /2-80 Example: Gland - SMN 40 Note: Special material glands may be supplied with four flats in place of standard hex. To ensure proper fit use Autoclave Engineers tubing. For mounting hole option add suffix PM to catalog number. onsult factory for mounting hole dimensions. - Flexible Solutions
HIGH PRESSURE FITTINGS AN TUING LOW PRESSURE atalog Number onnection Type Outside iameter Tube Pressure Rating psi (bar)* Minimum Opening imensions - inches (mm) A Typical E F G lock Fitting Pattern Elbow SL2200 SL4400 SL00 SL8800 Tee ST2220 ST4440 ST0 ST8880 W25 SW250 SW375 SW500 W25 SW250 SW375 SW500 /8 /2 /8 /2 (034.9) (034.9) (034.9) 0,000 (89.4) (034.9) (034.9) (034.9) 0,000 (89.4) 0.88 (4.78) 0.250 0.375 0.88 (4.78) 0.250 0.375.75.75 2.50 (3.50) 2.50 (3.50) 0.3 (7.87) 0.44 (.8) (3.4) (3.4) 0.3 (7.87) 0.44 (.8) (3.4) (3.4) 0.3 (5.88) 0.93 (23.2) 0.3 (5.88) 0.93 (23.2).25 (3.75).25 (3.75).25 (3.75).25 (3.75) 0.2 0.2 Fig. Fig. 2 ross SX2222 SX4444 SX SX8888 W25 SW250 SW375 SW500 /8 /2 (034.9) (034.9) (034.9) 0,000 (89.4) 0.88 (4.78) 0.250 0.375 2.50 (3.50) 2.50 (3.50) 0.3 (7.87) 0.44 (.8) (3.4) (3.4) 0.3 (5.88) 0.93 (23.2).25 (3.75).25 (3.75) 0.2 Fig. 3 Figure Figure 2 Figure 3 E F HEX A E F HEX A E F HEX A Elbow *Maximum pressure rating is based on the lowest rating of any component. Tee ross Actual working pressure may be determined by tubing pressure rating, if lower. All dimensions for reference only and subject to change. For prompt service, Autoclave stocks select products. onsult your local representative. All general terms and conditions of sale, including limitations of our liability, apply to all products and services sold. www.fluidcontrol.no - 7
HIGH PRESSURE FITTINGS AN TUING LOW PRESSURE atalog Number onnection Type Outside iameter Tube Pressure Rating psi (bar)* Minimum Opening imensions - inches (mm) A Typical E F G lock Fitting Pattern oupling 5F22 F4422 F22 4F8822 ulkhead oupling 5F22 F4422 F22 4F8822 W25 SW250 SW375 SW500 W25 SW250 SW375 SW500 /8 /2 /8 /2 (034.9) (034.9) (034.9) 0,000 (89.4) (034.9) (034.9) (034.9) 0,000 (89.4) 0.88 (4.78) 0.250 0.375 0.88 (4.78) 0.250 0.375 0.2 0.90 (7.53) 0.940 (23.88) 0.940 (23.88).20.25 (3.75).2.75.75.88 (47.75).88 (47.75) 2.38 (0.45) 0.3 (7.87) 0.44 (.8) (3.4) (3.4) 0.3 (7.87) 0.44 (.8) (3.4) (3.4) 0.3 (5.88) 0.93 (23.2) 0.3 (5.88) 0.93 (23.2) 0.78 (9.8) Fig. 4 Fig. 5 Figure 4 Figure 5 A HEX G MAX HEX F HEX HEX A E (A=Panel hole drill size) oupling ulkhead oupling *Maximum pressure rating is based on the lowest rating of any component. Actual working pressure may be determined by tubing pressure rating, if lower. All dimensions for reference only and subject to change. For prompt service, Autoclave stocks select products. onsult your local representative. All general terms and conditions of sale, including limitations of our liability, apply to all products and services sold. - 8 Flexible Solutions
LOW PRESSURE TUING FITTINGS AN TUING LOW PRESSURE TUING Pressures to psi (034 bar) Autoclave Engineers offers a complete selection of annealed, seamless stainless steel tubing designed to match the performance standards of Autoclave low pressure valves and fittings. Autoclave low pressure tubing is furnished in random lengths between 20 feet ( meters) and 2.5 feet (8.0 meters). The average is 24 feet (7.3 meters). The tubing is available in five sizes and a variety of materials. In order to ensure proper sleeve bite into tubing, Autoclave Engineers specifies and controls the strength levels of both the tube and sleeve materials. Inspection and Testing Autoclave Engineers low pressure tubing is inspected for compliance with specified defect restrictions as well as carburization or intergranular carbide precipitation. The tubing outside diameter and wall thickness is controlled within close tolerance to assure proper fit. Sample pieces of tube (for each lot) are tested to confirm mechanical properties for proper compression sleeve bite and pressure capability. Furthermore, the sample tubes are pressure tested as a final check. Special Materials In addition to the type /L and 304/304L stainless steel tubing listed in this section, Autoclave has a limited stock of hard-to-obtain shorter lengths of the following tubing materials: Monel 400*, Inconel 00*, Titanium Grade 2*, Nickel 200*, Hastelloy 27* - (* Trademark names) Please consult factory for stock availabilty. Tubing Tolerance Nominal Tubing Size Tolerance/Outside iameter inches (mm) inches (mm) / (.59).04/.02 (.2/.57) /8.28/.25 (3.25/3.8).254/.250 (.45/.35).379/.375 (9.74/9.53) /2.505/.500 (2.83/2.70) www.fluidcontrol.no - 9
LOW PRESSURE TUING atalog Number Tube Materials Fits onnection Type Outside iameter Tube Size Inches (mm) Inside iameter Wall Flow Area in. 2 (mm 2 ) 0-00 F -7.8 to 37.8 Working Pressure psi (bar)* 200 F 93 400 F 204 00 F 50 F 343 MS5-070 SS W02 / (.59) 0.02 (0.) 0.08 (0.4) 0.0005 (0.32) (034.20) (034.20) 4,400 (992.83) 3,00 (937.7) 2,00 (88.73) MS5-200 MS5-** SS W25 0.052 (.32) 0.09 (.75) 0.03 (0.9) 0.028 (0.7) 0.002 (.29) 0.004 (2.58) (034.20) 9,950 (8.02) (034.20) 9,400 (48.0) 4,400 (992.83) 8,550 (589.49) 3,00 (937.7) 8,450 (582.0) 2,00 (88.73) 8,000 (55.57) MS5-203 SS 0.084 (2.3) 0.083 (2.) 0.029 (8.7) (034.) (034.) 4,400 (992.83) 3,00 (937.7) 2,00 (88.73) MS5-055 MS5-** MS5-09 SS SS W250 or SW250 0.25 0.80 (4.57) 0.80 (4.57) 0.02 (.57) 0.035 (0.89) 0.035 (0.89) 0.02 (7.74) 0.02 (.77) 0.02 (.77),50 (803.23) 5,450 (375.7) 5,450 (375.7),50 (7.8) 5,50 (355.07) 5,450 (375.7),250 (775.5) 4,700 (324.05) 5,250 (3.97) 0,00 (730.83) 4,00 (37.5) 4,950 (34.29) 9,850 (79.2) 4,400 (303.3) 4,00 (37.5) MS5-58** 0.94 (4.93) 0.028 (0.7) 0.029 (8.7) 4,00 (37.5) 4,350 (299.92) 3,950 (272.34) 3,900 (272.34) 3,700 (255.0) MS5-204 SS 0.39 (3.53) 0.8 () 0.05 (9.79) (034.) (034.) 4,400 (992.83) 3,00 (937.7) 2,00 (88.73) MS5-84 0.95 (4.95) 0.090 (2.29) 0.030 (9.35) 0,000 (89.4) 9,400 (48.0) 8,00 (592.94) 8,500 (58.05) 8,450 (582.0) MS5-084 MS5-55** SS W375 or SW375 0.95 (4.95) 0.250 0.090 (2.29) 0.02 (.57) 0.030 (9.35) 0.049 (3.) 0,000 (89.4) 7,500 (57.0) 0,000 (89.4) 7,00 (489.52) 9,50 (5.33),450 (444.70) 9,000 (2),350 (437.8) 8,400 (579.5),050 (47.3) MS5-02 SS 0.250 0.02 (.57) 0.049 (3.) 7,500 (57.0) 7,500 (57.0) 7,200 (49.4),800 (48.84),300 (434.3) MS5-2** 0.305 (7.75) 0.035 (0.89) 0.073 (47.0) 3,800 (2) 3,550 (244.7) 3,250 (224.08) 3,200 (220.3) 3,050 (20.29) MS5-205 SS 0.270 (.8) 0.8 () 0.055 (35.48) 0,000 (89.4) 0,000 (89.4) 9,50 (5.33) 9,000 (2) 8,400 (579.5) MS5-208** MS5-05 SS W500 or SW500 /2 0.270 (.8) 0.375 0.8 () 0.02 (.57) 0.055 (35.48) 0.0 (70.97) 0,000 (89.4) 5,500 (379.2) 9,400 (48.0) 5,500 (379.2) 8,00 (592.94) 5,250 (3.97) 8,500 (58.05) 4,950 (34.29) 8,450 (582.0 4,00 (37.5) MS5-5** 0.402 (0.2) 0.048 (.22) 0.27 (8.94) 4,000 (275.79) 3,750 (258.55) 3,400 (234.42) 3,400 (234.42) 3,200 (220.3) *Maximum pressure rating is based on the lowest rating of any component. Actual working pressure may be determined by tubing pressure rating, if lower. **Items are being discontinued. ontact the factory for available stock All dimensions for reference only and subject to change. For prompt service, Autoclave stocks select products. onsult your local representative. - 0 Flexible Solutions
HIGH PRESSURE FITTINGS AN TUING MEIUM PRESSURE HIGH PRESSURE FITTINGS AN TUING MEIUM PRESSURE Pressures to psi (379 bar) Since 945 Autoclave Engineers has designed and built premium quality valves, fittings and tubing. This commitment to engineering and manufacturing excellence has earned Autoclave a reputation for reliable, efficient product performance. Autoclave Engineers has long been established as the world leader in high pressure fluid handling components for the chemical/petrochemical,research, and oil and gas industries. Medium Pressure Fittings, Tubing and Nipples Features: oned-and-threaded onnection. Available sizes are,, 9/, 3/4, and -/2. Fittings manufactured from cold worked stainless steel. Tubing is manufactured from dual rated /L and 304/304L cold worked stainless steel. Operating Temperatures from -423 F (-252 ) to 200 F (49 ). Anti-vibration connection components available. All items available in special material. The medium pressure series uses Autoclave s medium pressure connection. This coned-and-threaded connection features orifice sizes to match the high flow characteristics of this series. Autoclave Engineers medium pressure fittings, Series SF, are designed for use with Series 20SM medium pressure valves and Autoclave medium pressure tubing. They incorporate medium pressure conedand-threaded connections with orifices sized to match the high-flow Series 20S valves. onnection omponents All Autoclave valves and fittings are supplied complete with appropriate glands and collars. To order these components separately, use order numbers listed. When using plug, collar is not required. Gland GLX ( ) ollar LX ( ) Plug PX ( ) Add tube size ( ) - 40-0 9/ - 90 3/4-20 - 0 -/2-240 To ensure proper fit use Autoclave Engineers tubing. Note: Special material glands may be supplied with four flats in place of standard hex. Example: Gland - GLX 40 www.fluidcontrol.no -
HIGH PRESSURE FITTINGS AN TUING MEIUM PRESSURE atalog Number onnection Type Outside iameter Tube Pressure Rating psi (bar)* Minimum Opening imensions - inches (mm) A Typical E F G lock Fitting Pattern Elbow LX4400 LX00 LX9900 LX2 LX LX24 SF250X SF375X SF52X SF750X SF000X SF500X 9/ 3/4 -/2 (034.20) 0.25 0.29 (5.5) 0.359 (9.2) 0.5 (3.) 0.88 (7.48) 0.94 (23.80).2.75 2.25 (57.5) (7.20) 2.50 (3.50) (7.20) 4.2 (04.5) 4.00 5.75 (0.0) (4.05) 0.44 (.0) (3.4) 0.2 0.72 (8.29).2 0.2 0.94 (23.88).9.88 (47.3).25 (3.75) 2.0 (52.32) 2.88 (73.03).25 (3.75) 2.0 (52.32) 2.88 (73.03) 0.2 (34.93).75 2.25 (57.5) Fig. Tee TX4440 TX0 TX9990 TX2 TX TX24 SF250X SF375X SF52X SF750X SF000X SF500X 9/ 3/4 -/2 (034.20) 0.25 0.29 (5.5) 0.359 (9.2) 0.5 (3.) 0.88 (7.48) 0.94 (23.80).2.75 2.25 (57.5) (7.20) 2.50 (3.50) (7.20) 4.2 (04.5) 4.00 5.75 (0.0) (4.05) 0.44 (.0) (3.4) 0.2 0.72 (8.29).2 0.2 0.94 (23.88).9.88 (47.3).25 (3.75) 2.0 (52.32) 2.88 (73.03).25 (3.75) 2.0 (52.32) 2.88 (73.03) 0.2 (34.93).75 2.25 (57.5) Fig. Figure Figure 2 F HEX F HEX E A E A Elbow Tee *Maximum pressure rating is based on the lowest rating of any component. Actual working pressure may be determined by tubing pressure rating, if lower. For mounting hole option add suffix PM to catalog number. onsult factory for mounting hole dimensions. All dimensions for reference only and subject to change. For prompt service, Autoclave stocks select products. onsult your local representative. All general terms and conditions of sale, including limitations of our liability, apply to all products and services sold. - 2 Flexible Solutions
HIGH PRESSURE FITTINGS AN TUING MEIUM PRESSURE atalog Number onnection Type Outside iameter Tube Pressure Rating psi (bar)* Minimum Opening imensions - inches (mm) A Typical E F G lock Fitting Pattern ross XX4444 XX XX9999 XX2 XX XX24 SF250X SF375X SF52X SF750X SF000X SF500X 9/ 3/4 -/2 (034.20) 0.25 0.29 (5.5) 0.359 (9.2) 0.5 (3.) 0.88 (7.48) 0.94 (23.80) 2.50 (3.50) (7.20) 2.50 (3.50) (7.20) 4.2 4.2 (04.5) (04.5) 5.75 5.75 (4.05) (4.05) 0.44 (.0) (3.4) 0.2 0.72 (8.29).2 0.2 0.94 (23.88).9.88 (47.3).25 (3.75) 2.0 (52.32) 2.88 (73.03).25 (3.75) 2.0 (52.32) 2.88 (73.03) 0.2 (34.93).75 2.25 (57.5) Fig. 3 oupling / oupling 20FX44 20UFX44 20FX 20UFX 20FX99 20UFX99 20FX2 20UFX2 20FX 20UFX 5FX24 5UFX24 SF250X SF375X SF52X SF750X SF000X SF500X 9/ 3/4 -/2 (034.20) 0.25 0.29 (5.5) 0.359 (9.2) 0.5 (3.) 0.88 (7.48) 0.94 (23.80) 0.2.75 2.25 (25.5).2 (4.5).75 2.2 (53.85) 2.50 (3.50) 3.50 (88.90) 5.00 (27.00) 0.44 (.0) (3.4) 0.2 0.72 (8.29).2 0.2 0.94 (23.88).9.88 (47.3) Fig. 4 Figure 3 Figure 4 F HEX A HEX E A HEX ross oupling / oupling *Maximum pressure rating is based on the lowest rating of any component. Actual working pressure may be determined by tubing pressure rating, if lower. All dimensions for reference only and subject to change. For prompt service, Autoclave stocks select products. onsult your local representative. For mounting hole option add suffix PM to catalog number. onsult factory for mounting hole dimensions. ouplings are designed with a removable seat insert allowing disassembly and tubing removal without the necessity of loosening other items in a line. All general terms and conditions of sale, including limitations of our liability, apply to all products and services sold. www.fluidcontrol.no - 3
HIGH PRESSURE FITTINGS AN TUING MEIUM PRESSURE atalog Number onnection Type Outside iameter Tube Pressure Rating psi (bar)* Minimum Opening imensions - inches (mm) A Typical E F G lock Fitting Pattern ulkhead oupling 20FX44 20FX 20FX99 20FX2 20FX 5FX24 SF250X SF375X SF52X SF750X SF000X SF500X 9/ 3/4 -/2 (034.20) 0.25 0.29 (5.5) 0.359 (9.2) 0.5 (3.) 0.88 (7.48) 0.94 (23.80) 0.8 (20.57) 0.94 (23.88).2.9 (42.93).94 (49.28) 2.44 (.85).88 (47.75) 2.38 (0.45) 2.2 (.55) 3.50 (88.90) 5.00 (27.00) 0.44 (.0) (3.4) 0.2 0.72 (8.29).2 0.2 0.94 (23.88).9.88 (47.3) (3.4) 0.2 0.78 (9.8) 0.9 (23.).88 (47.75).88+ (47.75) 2.50+ (3.50) Fig. 5 Figure 5 G MAX F HEX HEX A E (A=Panel hole drill size) ulkhead oupling *Maximum pressure rating is based on the lowest rating of any component. Actual working pressure may be determined by tubing pressure rating, if lower. For mounting hole option add suffix PM to catalog number. onsult factory for mounting hole dimensions. + distance across flats All dimensions for reference only and subject to change. For prompt service, Autoclave stocks select products. onsult your local representative. All general terms and conditions of sale, including limitations of our liability, apply to all products and services sold. - 4 Flexible Solutions
MEIUM PRESSURE TUING FITTINGS, TUING AN NIPPLES MEIUM PRESSURE TUING Pressures to psi (379 bar) Autoclave Engineers offers a complete selection of austenetic, cold drawn stainless steel tubing designed to match the performance standards of Autoclave valves and fittings. Autoclave medium pressure tubing is manufactured specifically for high pressure applications requiring both strength and corrosion resistance. The tubing is furnished in random lengths between 20 feet ( meters) and 2.5 feet (8.0 meters). The average is 24 feet (7.3 meters). Medium Pressure Tubing is available in six sizes and a variety of materials. Inspection and Testing Autoclave Engineer s medium pressure tubing is inspected to assure freedom from seams, laps, fissures or other flaws, as well as carburization or intergranular carbide precipitation. The outside and inside diameters of the tubing are subject to special inspection and are controlled within close tolerences to assure proper fit. Sample pieces of tube for each lot are tested to confirm mechanical properties. Hydrostatic testing is also performed on a statistical basis and is conducted at the working pressure of the tube. Autoclave will perform 00% hydrostatic testing at additional cost if desired. Special Materials In addition to the type /L and 304/304L stainless steel tubing listed in this section, Autoclave has limited stock of hard-to-obtain special tubing materials: Monel 400*, Inconel 00*, Inconel 25*, uplex, Super uplex, Titanium Grade 2*, Nickel 200*, Hastelloy 27* (*Trademark names) Some are available in shorter lengths only. Please consult factory for stock availability. Tubing Tolerance Nominal Tubing Size Tolerance/Outside iameter inches (mm) inches (mm).248/.243 (.30/.7).370/.35 (9.40/9.27) 9/ (4.27).557/.552 (4.5/4.02) 3/4.745/.740 (8.92/8.80).995/.990 (25.27/25.4) -/2.495/.490 (37.98/37.85) www.fluidcontrol.no - 5
MEIUM PRESSURE TUING atalog Number Tube Materials Fits onnection Type Outside iameter Tube Size Inches (mm) Inside iameter Wall Flow Area in. 2 (mm 2 ) -423 to 00 F -252 to 37.8 Working Pressure psi (bar)* 200 F 93 400 F 204 00 F 800 F 427 MS5-092 MS5-92 SS SF250X 0.09 (2.77) 0.070 (.78) 0.009 (5.8) 8,950 (30.54) 9,250 (327.22) 7,200 (85.88) 8,050 (244.48) 7,000 (72.09),800 (58.30),50 (3.49) MS5-093 MS5-93 SS SF375X 0.203 (5.) 0.08 (2.8) 0.032 (20.5) 9,250 (327.22) 9,250 (327.22) 8,050 (244.48) 8,050 (244.48),800 (58.30),800 (58.30) MS5-085 MS5-87 SS SF52X 9/ 0.32 (7.92) 0.25 0.07 (49.03) 9,250 (327.22) 9,250 (327.22) 8,050 (244.48) 8,050 (244.48),800 (58.30),800 (58.30) MS5-097 MS5-94 SS SF52X 9/ 0.359 (9.2) 0.0 (2.57) 0.0 (5.) (034.) (034.) (034.) 4,70 (97.97) 4,400 (992.83) 2,900 (889.4) 3,50 (94.2) 2,750 (879.07) 2,70 (873.55) 2,70 (873.55) MS5-095 MS5-098 SS SS SF750X 3/4 0.438 (.3) 0.5 (3.) 0.5 (3.9) 0.7 (2.97) 0.5 (97.42) 0.209 (34.84) (034.) (034.) 9,250 (327.22) 4,400 (992.83) 8,050 (244.48) 3,50 (94.2),800 (58.30) 2,70 (873.55) MS5-09 MS5-099 SS SS SF000X (4.27) 0.88 (7.48) 0.29 (5.5) 0.5 (3.9) 0.248 (0.00) 0.37 (239.35) (034.) (034.) 9,250 (327.22) 4,400 (992.83) 8,050 (244.48) 3,50 (94.2),800 (58.30) 2,70 (873.55) 304 SS SF500X -/2 0.937 (23.80) 0.28 (7.5) 0.589 (444.88) (034.) (034.) 4,430 (994.90) 3,530 (932.85) 2,00 (88.73) Note: aution should be exercised in proper selection of Medium Pressure Tubing based on actual operating conditions. Two series available: psi (034 bar) and psi (379 bar). *Maximum pressure rating is based on the lowest rating of any component. Actual working pressure may be determined by tubing pressure rating, if lower. All dimensions for reference only and subject to change. For prompt service, Autoclave stocks select products. onsult your local representative. All general terms and conditions of sale, including limitations of our liability, apply to all products and services sold. - Flexible Solutions
MEIUM PRESSURE ONE-AN-THREAE NIPPLES FITTINGS, TUING AN NIPPLES MEIUM PRESSURE ONE-AN-THREAE NIPPLES Pressures to psi (379 bar) For rapid system make-up, Autoclave Engineers supplies precut, conedand-threaded nipples in various sizes and lengths for Autoclave medium pressure valves and fittings. Special lengths In addition to the standard lengths listed in the table below, nipples are available in any custom length. onsult factory. Materials** atalog numbers in table refer to Type Stainless steel. Optional materials available. onsult factory. atalog Number 2.75 (9.85) NX4402- (7.20) NX4403- NX03-4.00 (0.0) NX4404- NX04- NX9904- NLX9904- NLX204- NLX204- Nipple Length In (mm).00 (52.40) NX440- NX0- NX990- NLX990- NLX20- NLX20- NX0- NLX0- NLX240-8.00 (203.20) NX4408- NX08- NX9908- NLX9908- NLX208- NLX208- NX08- NLX08- NLX2408-0.00 (254.00) NX4400- NX00- NX9900- NLX9900- NLX200- NLX200- NX00- NLX00- NLX2400- Tube Size inches (mm) Fits (304.80) onnection Type O.. I.. NX4402- NX02- NX9902- NLX9902- NLX202- NLX202- NX02- NLX02- NLX2402- SF250X SF375X SF52X SF52X SF750X SF750X SF000X SF000X SF500X 9/ 9/ 3/4 3/4 -/2 0.09 (2.77) 0.203 (5.) 0.32 (7.92) 0.359 (9.2) 0.438 (.3) 0.5 (3.) (4.27) 0.88 (7.48) 0.937 (23.79) Working Pressure at 00 F psi (bar)* (034.) (034.) (034.) (034.) Note: aution should be exercised when selecting medium pressure nipples since two series are available: psi (034. bar) and psi (379 bar) medium pressure tubing section for pressures at various temperatures. *Maximum pressure rating is based on the lowest rating of any component. Actual working pressure may be determined by tubing pressure rating, if lower. **Type 304 Stainless Steel nipples available. All dimensions for reference only and subject to change. All general terms and conditions of sale, including limitations of our liability, apply to all products and services sold. www.fluidcontrol.no - 7
HIGH PRESSURE FITTINGS AN TUING HIGH PRESSURE HIGH PRESSURE FITTINGS AN TUING HIGH PRESSURE Pressures to 50,000 psi (0342 bar) Since 945 Autoclave Engineers has designed and built premium quality valves, fittings and tubing. This commitment to engineering and manufacturing excellence has earned Autoclave a reputation for reliable, efficient product performance. Autoclave Engineers has long been established as the world leader in high pressure fluid handling components for the chemical/petrochemical, research, and oil and gas, waterjet, and waterblast industries. High Pressure Fittings, Tubing and Nipples Features: oned-and-threaded onnection. Available sizes are, 5/,, 9/, and. Fittings manufactured from cold worked or high strength stainless steel. Tubing is manufactured from dual rated /L and 304/304L cold worked stainless steel. Operating Temperatures from -423 F (-252 ) to 200 F (49 ). Anti-vibration connection components available. Ultra-high pressure components. Autofrettaged tubing. High pressure high cycle tubing. The high and ultra-high pressure series uses Autoclave s high pressure connector. This coned-and-threaded connection provides dependable performance in gas or liquid service. SF are the industry standard for pressures to 50,000 psi (0342 bar). Utilizing Autoclave Engineers high pressure coned-and-threaded connections, these fittings are correlated with Series 30S, 43S, 30VM, 40VM, 0VM, 00VM, and 50V valves and Autoclave Engineers high pressure tubing. - 8 Flexible Solutions
HIGH PRESSURE FITTINGS AN TUING HIGH PRESSURE onnection omponents All Autoclave Engineers valves and fittings are supplied complete with appropriate glands and collars. To order these components separately, use order numbers listed. When using plug, collar is not required. Gland AGL ( ) ollar AL ( ) Plug AP ( ) Add tube size ( ) - 40 5/ - 50-0 9/ - 90-0 Example: 9/ Gland - AGL (90) To ensure proper fit use Autoclave Engineers tubing. Note: Special material glands may be supplied with four flats in place of standard hex. onnection Type Gland ollar Plug F250 F375 F52 AGL( ) AL( ) AP( ) F00043 GLX0 LX0 43P0 onnection omponents (Industry Standard) Autoclave Engineer s high pressure fittings, and 9/ Autoclave Engineer s high pressure fittings, and 9/ connection components to 0,000 psi (437 bar). For use with 30VM, 40VM, 0VM valves and fittings. Autoclave Engineer s high pressure connection components to 43,000 psi (295 bar) for use with 30S, 43Y valves, and fittings. F3250 GL50 L50 P50 00GL40 00GL0 00L40 00L0 00P40 00P0 Autoclave Engineer s ultra high pressure 5/ connection components to 50,000 psi ( 0342 bar) for use with 00VM and 50V valve and fittings. Autoclave Engineer s 00,000 psi (895 bar) connection components utilize our 5/ connection for and tubing. ( Note*) www.fluidcontrol.no - 9
HIGH PRESSURE FITTINGS AN TUING HIGH PRESSURE atalog Number onnection Type Outside iameter Tube Pressure Rating psi (bar)* Minimum Opening imensions - inches (mm) A Typical E F G lock Fitting Pattern Elbow L4400 00L4400 L5500 L00 00L00 L9900 40L9900 43L F250 F3250 F3250 F375 F3250 F52 F5240 F00043 5/ (7.94) 9/ 9/ 0,000 (43.79) 00,000 (894.5) 50,000 (034.97) 0,000 (43.79) 00,000 (894.5) 0,000 (43.79) 40,000 (2757.8) 43,000 (294.70) 0.25 0.88 (4.78) 0.250 0.438 (.3) 2.2 (53.85) 2.2 (53.85) 2.2 (53.85).88 (47.75).88 (47.775) (7.20) (7.20) (7.20) (7.20) 2.2 (.55) 2.2 (.55) 4.2 (04.5) (3.2) (3.2) (3.2) (3.2) 0.8 (20.57) 0.8 (20.57) 0.72 (8.29) 0.3 (5.88) 0.8 (20.2).9.9 0.2.2.2 2.0 (52.32) 0.88 (22.35).25 (3.75).88 (47.75).88 (47.75) 2.0 (52.32).75 Fig. Tee T4440 00T4440 T5550 T0 00T0 T9990 40T9990 43T F250 F3250 F3250 F375 F3250 F52 F5240 F00043 5/ (7.94) 9/ 9/ 0,000 (43.79) 00,000 (894.5) 50,000 (034.97) 0,000 (43.79) 00,000 (894.5) 0,000 (43.79) 40,000 (2757.8) 43,000 (294.70) 0.25 0.88 (4.78) 0.250 0.438 (.3).25 (3.75) 2.2 (53.85) 2.2 (53.85).5 (39.2) 2.2 (53.85) 2.2 (53.85) 2.2 (53.85) (7.20) (7.20) (7.20) (7.20) 2.2 (.55) 2.2 (.55) 4.2 (04.5) (3.2) (3.2) (3.2) (3.2) 0.8 (20.57) 0.8 (20.57) 0.72 (8.29) 0.3 (5.88) 0.8 (20.2).9.9 0.88 (22.35).0 (2.92) 2.0 (52.32).3 (47.75).88 (33.27) 2.0 (52.32).75 Fig. 2 Figure Figure 2 E F HEX A E F HEX A Elbow Tee *Maximum pressure rating is based on the lowest rating of any component. Actual working pressure may be determined by tubing pressure rating, if lower. All dimensions for reference only and subject to change. For prompt service, Autoclave stocks select products. onsult your local representative. Note: Fittings such as 45 elbows, reducer elbows, and reducer 45 elbows are available upon request. For mounting hole option add suffix PM to catalog number, consult factory for mounting hole dimensions. ontact your local sales representative for additional information. All general terms and conditions of sale, including limitations of our liability, apply to all products and services sold. - 20 Flexible Solutions - 20
HIGH PRESSURE FITTINGS AN TUING HIGH PRESSURE atalog Number onnection Type Outside iameter Tube Pressure Rating psi (bar)* Minimum Opening imensions - inches (mm) A Typical E F G lock Fitting Pattern ross X4444 00X4444 X5555 X 00X X9999 40X9999 43X F250 F3250 F3250 F375 F3250 F52 F5240 F00043 5/ (7.94) 9/ 9/ 0,000 (43.79) 00,000 (894.5) 50,000 (034.97) 0,000 (43.79) 00,000 (894.5) 0,000 (43.79) 40,000 (2757.8) 43,000 (294.70) 0.25 0.88 (4.78) 0.250 0.438 (.3).25 (3.75) (7.20) (7.20) 2.2 (53.85) 2.2 (7.20) 2.75 (9.85) 2.75 (9.85) (7.20) (7.20) (7.20) 2.2 (.55) 2.2 (.55) 4.2 4.2 (04.5) (04.5) (3.2) (3.2) (3.2) (3.2) 0.8 (20.57) 0.8 (20.57) 0.72 (8.29) 0.3 (5.88) 0.8 (20.2).9.9 0.2.0 (2.92) 2.0 (52.32).3 (33.27).3 (33.27) 2.0 (52.32).75 Fig. 3 Figure 3 F E A HEX ross *Maximum pressure rating is based on the lowest rating of any component. Actual working pressure may be determined by tubing pressure rating, if lower. All dimensions for reference only and subject to change. For prompt service, Autoclave stocks select products. onsult your local representative. Note: Fittings such as 45 elbows, reducer elbows, and reducer 45 elbows are available upon request. For mounting hole option add suffix PM to catalog number, consult factory for mounting hole dimensions. ontact your local sales representative for additional information. All general terms and conditions of sale, including limitations of our liability, apply to all products and services sold. www.fluidcontrol.no - 2
HIGH PRESSURE FITTINGS AN TUING HIGH PRESSURE atalog Number onnection Type Outside iameter Tube Pressure Rating psi (bar)* Minimum Opening imensions - inches (mm) A Typical E F G lock Fitting Pattern oupling/ oupling 0F4433 0UF4433 00F4433 00UF4433 50F5533 50UF5533 0F33 0UF33 00F33 00UF33 0F9933 0UF9933 40F9933 40UF9933 43F 43UF F250 F3250 F3250 F375 F3250 F52 F5240 F00043 (7.94) 5/ (7.94) 9/ 9/ 0,000 (43.79) 00,000 (034.97) 50,000 (034.97) 0,000 (43.79) 00,000 (894.5) 0,0 00 (43.79) 40,000 (2757.8) 43,000 (294.70) 0.25 0.88 (4.78) 0.250 0.438 (.3).2.2.2 (28.45.75 2.2 (.55) 2.2 (.55).75 2.2 (.55) 2.9 (55.3) 2.9 (55.3) 3.50 (88.90) (3.2) (3.2) (3.4) (3.2) 0.8 (20.57) 0.8 (20.57) 0.72 (8.29) 0.3 (5.88) 0.8 (20.2).9.9 Fig. 4 ulkhead oupling 0F4433 00F4433 50F5533 0F33 00F33 0F9933 40F9933 43F F250 F3250 F3250 F375 F3250 F52 F5240 F00043 5/ (7.94) 9/ 9/ 0,000 (43.79) 00,000 (894.5) 50,000 (034.97) 0,000 (43.79) 00,000 (894.5) 0,000 (43.79) 40,000 (2757.8) 43,000 (294.70) 0.25 0.88 (4.78) 0.250 0.438 (.3) 0.94 (23.88) 2.2 (53.85) 2.2 (53.85).2 2.2 (53.85).9 (42.93).9 (42.93).94 (49.28).88 (47.75) 3.25 (82.55) 3.25 (82.55) 2.38 (0.45) 3.25 (82.55) 2.75 (9.85) 2.75 (9.85) 3.50 (88.90) (3.2) (3.2) (3.4) (3.2) 0.8 (20.57) 0.8 (20.57) 0.72 (8.29) 0.3 (5.88) 0.8 (20.2).9.9 0.78 (9.8).88 (47.75).88 (47.75) 2.3 (54.0) (9.5) (9.5) (9.5) (9.5) (9.5) (9.5) (9.5) Fig. 5 Figure 4 Figure 5 A HEX G MAX HEX F A HEX E (A=Panel hole drill size) oupling / oupling ulkhead oupling *Maximum pressure rating is based on the lowest rating of any component. Actual working pressure may be determined by tubing pressure rating, if lower. All dimensions for reference only and subject to change. For prompt service, Autoclave stocks select products. onsult your local representative. ouplings are designed with a removable seat insert allowing disassembly and tubing removal without the necessity of loosening other items in a line. All general terms and conditions of sale, including limitations of our liability, apply to all products and services sold. - 22 Flexible Solutions
HIGH PRESSURE TUING FITTINGS, TUING AN NIPPLES HIGH PRESSURE TUING Pressures to 50,000 psi (0342 bar) Autoclave Engineers offers a complete selection of austenetic, cold drawn stainless steel tubing designed to match the performance standards of Autoclave valves and fittings. Autoclave high pressure tubing is manufactured specifically for high pressure applications requiring both strength and corrosion resistance. The tubing is furnished in random lengths between 20 feet ( meters) and 2.5 feet (8.0 meters). The average is 24 feet (7.3 meters). High pressure tubing is available in five sizes and a variety of materials. Special longer lengths are available. onsult factory. Inspection and Testing Autoclave Engineer s high pressure tubing is inspected to assure freedom from seams, laps, fissures or other flaws, as well as carburization or intergranular carbide precipitation. The outside and inside diameters of the tubing are controlled within close tolerances. Sample pieces of tubing for each lot are tested to confirm mechanical properties. Hydrostatic testing is also performed on a statistical basis and is conducted at the working pressure of the tube. Autoclave will perform 00% hydrostatic testing at additional cost if desired. Special Materials In addition to the type /L and 304/304L stainless steel tubing listed in this section, Autoclave has limited stock of hard-to-obtain shorter lengths of the following tubing materials in some sizes: Monel 400*, Inconel 00*, Inconel 25*, uplex, Super uplex, Titanium Grade 2*, Nickel 200*, Hastelloy 27* (*Trademark names) Some are available in shorter lengths only. Please consult factory for stock availability. Tubing Tolerance Nominal Tubing Size Tolerance/Outside iameter inches (mm) inches (mm).248/.243 (.30/.7) 5/ (7.94).30/.30 (7.87/7.77).370/.35 (9.40/9.27) 9/.557/.552 (4.5/4.02).995/.990 (25.27/25.4) www.fluidcontrol.no - 23
HIGH PRESSURE TUING atalog Number Tube Materials Fits onnection Type MS5-202 Stainless ( note 3) MS5-08 MS5-82 SS F250 MS5-082 SS F3250 MS5-20 Stainless ( note 3) MS5-087 MS5-83 MS5-20 MS5-083 MS5-85 SS Stainless SS F375 F52 MS5-090 SS F5240 MS5-209 Stainless F5240-32 MS5-2 SS F00043 MS5-99 F00043 Outside iameter 5/ (7.94) 9/ 9/ 9/ Tube Size Inches (mm) Inside iameter 0.083 (2.) 0.02 (.57) 0.25 0.88 (4.78) 0.250 0.32 (7.92) 0.438 (.3) 0.438 (.3) Wall 0.083 (2.) 0.25 0.25 0.87 (4.75) 0.5 (3.9) 0.25 0.28 (7.4) 0.28 (7.4) Flow Area in. 2 (mm 2 ) 0005 (3.23) 0.033 (.94) 0.02 (7.74) 0.028 (8.0) 0.048 (30.97) 0.07 (49.03) 0.5 (97.42) 0.5 (97.42) -423 to 00 F -252 to 37.8 00,000 (894.4) 0,000 (43.79) 0,000 (43.79) 50,000 (034.97) 00,000 (894.4) 0,000 (43.79) 0,000 (43.79) 00,000 (894.4) 0,000 (43.79) 0,000 (43.79) 40,000 (2757.8) 40,000 (2757.8) 43,000 (294.70) 43,000 (294.70) Working Pressure psi (bar)* 200 F 93 00,000 (894.4) 0,000 (43.79) 5,800 (39.) 50,000 (034.97) 00,000 (894.4) 0,000 (43.79) 5,800 (39. 00,000 (894.4) 0,000 (43.79) 5,800 (39. 40,000 (2757.8) 40,000 (2757.8) 43,000 (294.70) 40,00 (2799.23) 400 F 204 9,20 (33.24) 57,750 (398.) 5,50 (35.09) 44,400 (9955.87) 9,20 (33.24) 57,750 (398.) 5,50 (35.09) 9,20 (33.24) 57,750 (398.) 5,50 (35.09) 38,500 (254.44) 38,500 (254.44) 43,000 (294.70) 3,900 (2544.3) 00 F 90,38 (230.55) 54,250 (3740.35) 50,700 (3495.59) 3,350 (9400.85) 90,38 (230.55) 54,250 (3740.35) 50,700 (3495.59) 90,38 (230.55) 54,250 (3740.35) 50,700 (3495.59) 3,00 (2488.9) 3,00 (2488.9) 4,380 (2853.0) 3,300 (2502.7) 800 F 427 84,420 (5820.4) 50,700 (3495.59) 48,450 (3340.4) 2,750 (8738.97) 84,420 (5820.4) 50,700 (3495.59) 48,450 (3340.4) 84,420 (5820.4) 50,700 (3495.59) 48,450 (3340.4) 33,800 (2330.39) 33,800 (2330.39) 3,330 (2504.83) 34,700 (2392.44) Note:. Autofrettaged tubing available (see technical Information section: Pressure ycling for Autofrettage information) 2. For High Pressure, High ycle (HPH) tubing, MS5-20, MS5-202, MS5-209, and MS5-20 are available. ( Technical Information section: Pressure ycling for additional information) 3. For 00,000 psi rating use F3250 connection *Maximum pressure rating is based on the lowest rating of any component. Actual working pressure may be determined by tubing pressure rating, if lower. All dimensions for reference only and subject to change. For prompt service, Autoclave stocks select products. onsult your local representative. All general terms and conditions of sale, including limitations of our liability, apply to all products and services sold. - 24 Flexible Solutions
HIGH PRESSURE ONE-AN-THREAE NIPPLES FITTINGS, TUING AN NIPPLES HIGH PRESSURE ONE-AN-THREAE NIPPLES Pressures to 50,000 psi (0342 bar) For rapid system make-up, Autoclave Engineers supplies precut, conedand-threaded nipples in various sizes and lengths for Autoclave medium pressure valves and fittings. Special lengths In addition to the standard lengths listed in the table below, nipples are available in any custom length. onsult factory. Materials** atalog numbers in table refer to Type Stainless steel. Note: Most items available in. onsult factory for availability. 2.75 (9.85) (7.20) 4.00 (0.0) atalog Number Nipple Length In (mm).00 (52.40) 8.00 (203.20) 0.00 (254.00) Tube Size inches (mm) Fits (304.80) onnection Type O.. I.. N4402- N4403- N4404- N440- N4408- N4400- N4402- F250 N5504- N550- N5508- N5500- N5502- F3250 N03- N04- N0- N08- N00- N02- F375 N9904- N990- N9908- N9900- N9902- F52 40N9904-40N990-43N0-40N9908-43N08- Note: High pressure tubing section for pressure ratings at various temperatures. 40N9900-43N00-40N9902-43N02- F5240 F00043 9/ 9/ 3/4 3/4 0.09 (2.77) 0.203 (5.) 0.32 (7.92) 0.359 (9.2) 0.438 (.3) 0.5 (3.) Working Pressure* at 00 F (37.8 ) psi (bar)* (034.) (034.) Material in table is Stainless steel *Maximum pressure rating is based on the lowest rating of any component. Actual working pressure may be determined by tubing pressure rating, if lower. All dimensions for reference only and subject to change. For prompt service, Autoclave stocks select products. onsult your local representative. All general terms and conditions of sale, including limitations of our liability, apply to all products and services sold. www.fluidcontrol.no - 25
NOTES - 2 Flexible Solutions