PRODUCT SPECIFICATION: A72-738[2].008 (WON 60725) Initial Issue CONSISTING OF DOCUMENTS: QTY QTY UNIT SPECIFICATION PC P72-738[2].004 PC PC LPR 0002(RJ45 M).000 ATR 002.00 PC ETR 090.002 Germany Malaysia USA Canada www.alysium.com
what you expect + More. P72-738.004 RJ45 Unified Plug Ind. Assembly (WON 60805) Specification Referesh L (Length in Meter), As per Customer Requirements 2 8 3±0.3 4.00 GigE Unified Plug UNLESS OTHERWISE SPECIFIED ASSY LENGTH TOLERANCE < 50mm = ±0 50mm and < 250mm = ±5 250mm and < 500mm = ±20 500mm and < 000mm = ±30 000mm and < 5000mm = ±50 5000mm and above = ±00 RoHS COMPLIANT This document is the property of Alysium-Tech. It must not be copied or otherwise disclosed without prior written consent BILL OF MATERIALS Item Description. A+ RJ45 Unified Plug 8P8C Diecast Metal Shell 2. A07-0528, [OD=5.89mm] <BLK> Halogen Free CAT7 4P x #26, Dual Shielded with LSZH TPU Jacket 3 Accessories (Please refer to Accessories Details): TEST SPECIFICATION Electrical Test (Continuity, Insulation Resistance, Conductance Test) For Assembly Length < 20m ) Voltage = 300VDC, 2) Insulation Resistance = 20MΩ 3) Conductance = 3Ω For Assembly Length 20m ) Voltage = 500VDC, 2) Insulation Resistance = 20MΩ 3) Conductance = 5Ω WIRING DIAGRAM Shell White/ Orange Orange White/ Green Blue White/ Blue Green White/ Brown Brown Shell Note: All the Pair Shield connected to B. Shield ACCESSORIES DETAILS This Assembly/ Item 3 inclusive of accesories as per below shown: A) Metal Sheet Bracket (pc) B) M2 Thumb Screw (2pcs) C) M2.6 x 2.5mm Flat Head Screw (pc) (Pre-Installed in RJ45 connector) D) M2.6 x 5.0mm Flat Head Screw (pc) (Use for install Metal Housing Bracket) A + D E) Spacer (Thickness =2 mm & 4mm) (Each pc) E B rev3 C A rev3 D
what you expect + More. P72-738.004 RJ45 Unified Plug Ind. Assembly (WON 60805) Specification Referesh PLUG LENGTH & LOCKING BRACKET CUSTOMIZATION: Horizontal Locking Plug Length: mm Spacer: 2mm 2mm Spacer Plug Length: 9mm Spacer: 4mm 4mm Spacer Plug Length: mm Spacer: 2mm 2mm Spacer Vertical Locking Plug Length: 9mm Spacer: 4mm 4mm Spacer Bracket Installation Guide line Step : Remove rubber ring from the die cast body to reveal the threaded mounting hole Rubber Ring Threaded hole Step 2: Determine the plug length required (9mm or mm) and insert the spacer to the plug from the front to depress on the latch tab 3.5±0.3 3.5±0.3 Spacer (.00) (9.00) (.00) (9.00) Step 3: After spacer installation, glide the bracket from the back and fasten using M2.6 x 5.0mm screw provided (26.00) 20±0.3 7.00±0.2 4.00 7.00±0.2 7.00±0.2 4.00 Bracket M2.6 x 5.0mm Screw 4.00 (26.00) 20±0.3 M2.6 x 2.5mm Screw (Remove) Step 4: Customization/ installation completed Same steps apply to horizontal bracket installation
what you expect + More. Heat Sealed PE Bag Packaging Cable Label Guideline LPR 0002(RJ45 M).000 Packaging Detail for RJ45 Assembly (A+ Series) (WON 60805) Initial Issue (30) 4 xx.xm XYZ Random Example PAD PRINT <WHITE> Refer to seperate file, Date Code Format xx.xm XYZ Specified Cable Length (2) Week Year (3) Shown 2 Coil Inner Diameter Please refer to Table 3 Packaging Contains ) Basic Assembly pc 2) Magic Tie / Cable Tie 2pcs 3) Accesories Set --> Metal Sheet Bracket pc --> Thumb Screw (M2) 2pcs --> Spacer (Thickness =2mm) pc --> Spacer (Thickness =4mm) pc --> M2.6 x 5.0mm Flat Head Screw pc 4) White Pad Print pc Table : Assembly Coiling Inner Diameter Type of Cable / Cable Jacket OD Coil ID (mm) General 250 This document is the property of Alysium-Tech. It must not be copied or otherwise disclosed without prior written consent RoHS COMPLIANT
ATR 002.00 Cat6A Application Testing (WON 60508) Equipments ) Fluke Model : DSX-5000 Cable Analyzer (main & remote unit); 2) Cat6a Adapters : DSX-PC6AS Cat6A Test Setup Test Setup Cat6A Cable Type : Select Type Of Cat Cable used to build the assembly Test Limit : ISO Patch Cord Cat6A Testing Method ) Cat6A Adapter installed on both main and remote unit of the DSX-5000 2) Connect RJ45 plug (assembly - both end) to the Patch Cord Adapters 3) Press Test Button. 4) Test Result will be shown on the Main Unit Of DSX-5000 5) Result analyzed and result saved. Refresh specification
ETR 090.002 Hi Pot Test Criteria (WON 608) Spec Referesh Electrical Test Criteria ) Open/Short circuit 2) Intermittent 3) Insulation Resistance Hi Pot Tester Model CT-868N (ATPN : ETE 0900) Hi Pot Tester kv HV DUT With Metal Enclosure Measurement Parameters Voltage = 300VDC, Insulation Resistance > 20M Ohm, Time = 0.s ma Return Simulated Line Leakage Diagram Sampling size 00% Check