Vertico 16 VF, door weight up to 15 kg, for 2 bi-parting doors Door height: 300 600 mm Door thickness: Min. 16 mm Side panel thickness: Min. 1 mm Running gear: Top and bottom running, 4 rollers, with ball bearing mounted, plastic sleeved rollers Counterweight: The bottom door is the counterweight for the top door, both doors must therefore weigh the same Door stop: Top and bottom stoppers for press fitting into the single running track Installation dimensions Running gear Cord guide Door stop Single running track Cord tensioner Cover profile installation Cord holder Cord Screw-in dowel FF.94
Running gear installation Door height H mm H1 mm H2 mm 300 379 300 160 30 459 30 240 460 600 460 320 Top door Bottom door Set Cat. No. For door heights of 300 379 mm 403.00.001 For door heights of 30 459 mm 403.00.002 For door heights of 460 600 mm 403.00.003 Packing: 1 set Order reference Please order running track and cover profile separately. Tracks and individual components Material Finish Length mm Cat. No. Single running track, for press fitting into the groove in the carcase front and screw fixing with countersunk chipboard screws Ø4 mm Aluminium Silver coloured 2,500 403.01.925 Cover profile, for covering the single running track, to clip on Aluminium Silver coloured 2,500 403.02.925 FF.95
Vertico 30 VF, door weight up to 20 kg Door heights: 20 1,200 mm Door thickness: Min. 16 mm Side panel thickness: Min. 1 mm Running gear: Top running, 4 rollers, with ball bearing mounted, plastic sleeved rollers Counterweight: Counterweight must correspond to door weight Door stop: Top and bottom stoppers for press fitting into the single running track Installation dimensions Cover plate, top, with cord guide Top door stop Cord Cover cap for counterweight box Glide profile Running gear Counterweight box Counterweight Door stop positioning Top door stop Mounting jig Cord suspending position Single running track Cover profile Lower cover plate Cover profile Sealing piece for running track and cover profile Bottom door stop Screw-in dowel FF.96
Running gear installation Calculating total weight of door If using extremely large or heavy door handles please take the weight of the door handle into consideration when calculating the total weight. Weight of door + Weight of running gears = 0.050 kg + Weight of door handle ------------------------------------------- = Total weight of door Weight of door = Width m x Height m x Weight kg/m 2 In the following table the weights are shown in kg/m 2 for chipboard material. Door height H mm H1 mm H2 mm 20 399 20 140 400 499 400 260 500 599 500 360 600 699 600 460 700 799 700 560 00 99 00 660 900 999 900 760 1,000 1,200 1,000 60 Door thickness mm 16.0 19.0 22.0 25.0 3.0 Weight kg/m 2 12.0 14.25 16.5 1.75 2.5 Total weight of door max. 10 kg Weight of both running gears Total weight of door kg Number of counterweights 200 g pcs. 100 g pcs. 3.30 14 2 3.52 16 3.94 1 4.14 1 2 4.36 20 4.5 20 2 4.0 22 5.02 22 2 5.22 24 5.44 24 2 5.6 26 2 6.0 2 6.30 2 2 6.50 30 6.72 30 2 6.94 32 7.16 32 2 7.56 34 2 7.7 36.00 36 2.22 3.44 3 2.64 40.6 40 2 9.0 42 9.50 44 9.70 44 2 9.96 46 Door height mm Weight of both running gears kg 20 399 0.24 400 499 0.32 500 599 0.3 600 699 0.45 700 799 0.52 00 99 0.5 900 999 0.65 1,000 1,200 0.72 FF.97
Total weight of door max. 15 kg Total weight of door kg Number of counterweights 200 g pcs. 100 g pcs. 10.14 46 2 10.36 4 10.5 4 2 10.7 50 11.00 50 2 11.42 52 2 11.64 54 11.4 54 2 12.06 56 12.2 56 2 12.50 5 12.72 5 2 13.12 60 2 13.34 62 13.56 62 2 13.7 64 13.9 64 2 14.20 66 14.42 66 2 14.64 6 Total weight of door max. 20 kg Total weight of door kg Number of counterweights 200 g pcs. 100 g pcs. 15.06 70 15.26 70 2 15.4 72 15.70 72 2 15.92 74 16.12 74 2 16.34 76 16.56 76 2 16.9 7 2 17.20 0 17.40 0 2 17.62 2 17.4 2 2 1.06 4 1.2 4 2 1.6 6 2 1.90 19.12 2 19.34 90 19.54 90 2 19.76 92 19.9 92 2 20.00 94 Set Cat. No. For door heights of 20 399 mm 403.10.001 For door heights of 400 499 mm 403.10.002 For door heights of 500 599 mm 403.10.003 For door heights of 600 699 mm 403.10.004 For door heights of 700 799 mm 403.10.005 For door heights of 00 99 mm 403.10.006 For door heights of 900 999 mm 403.10.007 For door heights of 1,000 1,200 mm 403.10.00 Packing: 1 set Order reference Please order running track, cover profile, counterweight box, counterweights and glide profile separately. FF.9
Tracks and individual components Material Finish Length mm Cat. No. Single running track, for press fitting into the groove in the carcase front and screw fixing with countersunk chipboard screws Ø4.0 mm Aluminium Silver coloured 2,500 403.11.925 Cover profile, for covering the single running track, to clip on Aluminium Silver coloured 2,500 403.12.925 Counterweight box, for press fitting into the single running track Max. door weight kg Material Finish Packing Cat. No. 10 Aluminium Silver coloured 550 mm 403.13.901 15 750 mm 403.13.902 20 1,000 mm 403.13.903 Glide profile. for press fitting into counterweight box _ Plastic Transparent 3,000 mm 403.14.430 100 g counterweight, for placing into counterweight box _ Lead Bright 1 or 10 pcs. 403.16.001 200 g counterweight, for placing into counterweight box _ Lead Bright 1 or 10 pcs. 403.16.002 Installation The length of the counterweight box is designed for the maximum door weight (10, 15 and 20 kg). A space is left in the upper area of the box when it is filled to the maximum capacity. This space allows fine adjustments to be made, i.e. weights can be removed or added. If the maximum door weight is less than the specified maximum weight, the box can also be shortened. Please note that a space of at least 70 mm is needed to make fine adjustments. FF.99
Vertico 16 VF SW, door weight up to 15 kg, for 2 bi-parting doors Door heights: 300 600 mm Glass thickness: 4 mm Side panel thickness: Min. 1 mm Running gear: Top and bottom running, 4 rollers, with ball bearing mounted, plastic sleeved rollers Counterweight: The bottom door is the counterweight for the top door, both doors must therefore weigh the same Door stop: Top and bottom stoppers for press fitting into the single running track Installation dimensions Cord guide Running gear Door stop Cord tensioner Cord holder Mounting plate Aluminium frame mounting Stop seal profile Frame fixing bracket Cord Frame fixing bracket Mounting plate Glass retaining profile Aluminium frame profile Slide glass retaining profile into aluminium frame profile Shorten profile to mitre of 45 Cover cap Single running track Cover cap mounting Single running track Cover profile Cover profile installation FF.100
Installation of running gear Door height H mm H1 mm H2 mm 300 379 300 160 30 459 30 240 460 600 460 320 Top door Bottom door Set Cat. No. For 2 doors, door heights of 300 379 mm 403.00.021 For 2 doors, door heights of 30 459 mm 403.00.022 For 2 doors, door heights of 460 600 mm 403.00.023 Packing: 1 set Order reference Please order running track, cover profile, aluminium frame profile, glass retaining profile and stop seal profile separately. Tracks and individual components Material Finish Length mm Cat. No. Single running track, for press fitting into the groove in the carcase front and screw fixing with countersunk chipboard screws Ø4.0 mm Aluminium Silver coloured 2,500 403.01.925 Cover profile, for covering the single running track, to clip on Aluminium Silver coloured 2,500 403.02.925 Aluminium frame profile, for screwing to frame fixing bracket Glass retaining profile, used for stabilising and as clatter prevention for the fitted pane of glass, for inserting into the aluminium frame profile Aluminium Silver coloured 2,500 403.03.925 Plastic Transparent 3,000 403.04.430 Stop seal profile, for inserting into aluminium frame profile Plastic Transparent 3,000 403.05.430 FF.101
Vertico 20 VF, door weight up to 20 kg Door heights: 20 1,200 mm Glass thickness: 4 mm Side panel thickness: Min. 1 mm Running gear: Top running, 4 rollers, with ball bearing mounted, plastic sleeved rollers Counterweight: Counterweight must correspond to door weight Door stop: Top and bottom stoppers for press fitting into the single running track Installation dimensions Aluminium frame construction Frame fixing bracket Mounting plate Glass retaining profile Aluminium frame profile Door stop positioning Top door stop Mounting jig Cord suspending position Cover profile Sealing piece for running track and cover profile A Cover plate, top, with cord guide B Top door stop C Cord D Cover cap for counterweight box E Glide profile F Running gear G Counterweight box H Counterweight I Single running track J Cover profile K Lower cover plate L Bottom door stop M Mounting plate FF.102
Total weight of door max. 10 kg Total weight of door kg Number of counterweights 200 g pcs. 100 g pcs. 3.30 14 2 3.52 16 3.94 1 4.14 1 2 4.36 20 4.5 20 2 4.0 22 5.02 22 2 5.22 24 5.44 24 2 5.6 26 2 6.0 2 6.30 2 2 6.50 30 6.72 30 2 6.94 32 7.16 32 2 7.56 34 2 7.7 36.00 36 2.22 3.44 3 2.64 40.6 40 2 9.0 42 9.50 44 9.70 44 2 9.96 46 Installation of running gear Weight of both running gears Door height mm Weight of both running gears kg 20 399 0.24 400 499 0.32 500 599 0.3 600 699 0.45 700 799 0.52 00 99 0.5 900 999 0.65 1,000 1,200 0.72 Calculating total weight of door If using extremely large or heavy door handles please take the weight of the door handle into consideration when calculating the total weight. Weight of glass door + Weight of running gears + Weight of aluminium frame + weight of fixing material for aluminium frame profile + Weight of door handle ------------------------------------------- = Total weight of door Weight of glass Weight of door = Width m x Height m x Weight kg/m 2 (4 mm glass) Weight of aluminium frame Weight = 2 x (door width + door height) x 0.57 kg Weight of fixing material for aluminium frame profile Weight = 0.15 kg Door height H mm H1 mm H2 mm 20 399 20 140 400 499 400 260 500 599 500 360 600 699 600 460 700 799 700 560 00 99 00 660 900 999 900 760 1,000 1,200 1,000 60 FF.103
Total weight of door max. 15 kg Total weight of door kg Number of counterweights 200 g pcs. 100 g pcs. 10.14 46 2 10.36 4 10.5 4 2 10.7 50 11.00 50 2 11.42 52 2 11.64 54 11.4 54 2 12.06 56 12.2 56 2 12.50 5 12.72 5 2 13.12 60 2 13.34 62 13.56 62 2 13.7 64 13.9 64 2 14.20 66 14.42 66 2 14.64 6 Total weight of door max. 20 kg Total weight of door kg Number of counterweights 200 g pcs. 100 g pcs. 15.06 70 15.26 70 2 15.4 72 15.70 72 2 15.92 74 16.12 74 2 16.34 76 16.56 76 2 16.9 7 2 17.20 0 17.40 0 2 17.62 2 17.4 2 2 1.06 4 1.2 4 2 1.6 6 2 1.90 19.12 2 19.34 90 19.54 90 2 19.76 92 19.9 92 2 20.00 94 Set Cat. No. For door heights of 20 399 mm 403.10.011 For door heights of 400 499 mm 403.10.012 For door heights of 500 599 mm 403.10.013 For door heights of 600 699 mm 403.10.014 For door heights of 700 799 mm 403.10.015 For door heights of 00 99 mm 403.10.016 For door heights of 900 999 mm 403.10.017 For door heights of 1,000 1,200 mm 403.10.01 Packing: 1 set Order reference Please order running track, cover profile, frame profile, glass retaining profile, counterweight box, counterweights, and glide profile separately. FF.104
Tracks and individual components Material Finish Length mm Cat. No. Single running track, for press fitting into the groove in the carcase front and screw fixing with countersunk chipboard screws Ø4.0 mm Aluminium Silver coloured 2,500 403.11.925 Cover profile, for covering the single running track, to clip on Aluminium Silver coloured 2,500 403.12.925 Aluminium frame profile, for screwing to frame fixing bracket Aluminium Silver coloured 2,500 403.14.925 Glass retaining profile, used for stabilising and as clatter prevention for the fitted pane of glass, for inserting into the aluminium frame profile Plastic Transparent 3,000 403.04.430 Additional components Counterweight box, for press fitting into single running track Glide profile, for press fitting into counterweight box Max. door weight kg Material Finish Packing Cat. No. 10 Aluminium Silver coloured 550 mm 403.13.901 15 750 mm 403.13.902 20 1,000 mm 403.13.903 _ Plastic Transparent 3,000 mm 403.14.430 100 g counterweight, for placing into counterweight box _ Lead Bright 1 or 10 pcs. 403.16.001 200 g counterweight, for placing into counterweight box _ Lead Bright 1 or 10 pcs. 403.16.002 Installation The length of the counterweight box is designed for the maximum door weight (10, 15 and 20 kg). A space is left in the upper area of the box when it is filled to the maximum capacity. This space allows fine adjustments to be made, i.e. weights can be removed or added. If the maximum door weight is less than the specified maximum weight, the box can also be shortened. Please note that a space of at least 70 mm is needed to make fine adjustments. FF.105