We're everywhere you need us to be! Proportional Regulator E22 Series Pneumatic-Catalogue-GB-09/05 659
General Informationen The E22 Series electronic proportional regulator quickly and accurately adjusts output pressure in relation to an electronic control signal. It meets requirements of industrial environments including rapid cycling, high flow, quick response and repeatability; which are found in paint, welding, packaging, textile, medical and many other process applications. E22 Series Endless Modulary to 22 Serie FlexiBlok Components 660 Pneumatic-Catalogue-GB-09/05
Contents Series Description Page E22 General Information................................... 660 Technical Data.......................................... 662 Overview.............................................. 663 Dimensions............................................ 664 Accessories Female Connectors...................................... 665 Shut Off......................................... 665 Diverter Block........................................... 665 Bracket / Muffler Kit...................................... 665 Particulate Filter......................................... 666 Filter / Regulator........................................ 666 Digital Switch................................... 666 Pneumatic-Catalogue-GB-09/05 661
Technical Data E22 Series Regulator Available in 1/4; 3/8 and 1/2 with G, NPTF or MPT threads Three ways of mounting (integral mounting holes, bracket kit and bottom mount) Modular to 22 Series FlexiBlok design Three setable performance modes in a single unit (accurate, standard and fast) Large digital display for easy reading Designed to meet IP 65 / NEMA 4 Full ported 1/2 exhaust for optimal performance Programmable in steps of 0.05 bar Performance Graphs Linearity Hysteresis Repeatability Characteristics Set 3 bar Technical Data Minimum supply pressure: Maximum supply pressure: Regulating pressure range: 662 Specifications Set pressure + 1 bar 12 bar 0-10 bar Power supply: Voltage: 24 VDC ± 10 % Current consumption: 0.04 A Input signal: Current: 4 to 20 ma Voltage: 0 to 5 VDC; 0 to 10 VDC Input impedance: Current: 250 Voltage: Output signal: Analog output: 0 to 15 VDC; 0 to 10 VDC; 4 to 20 ma Linearity: Hysteresis: Repeatability: Sensitivity: Switch output: 4.8 K 24 VDC (PNP) ± 1 % of span ± 0.5 % of span ± 0.5 % of span ± 0.2 % of span Temp characteristics: ± 0.5 % of span / C Output display: Accuracy: ± 0.5 % of span Minimum unit: PSI 0.1; bar 0.01; kpa 001.; kgf/cm 2 0.01 Temperature range: 4 to 50 C Enclosure: Weight: Flow Characteristics Supply 8.3 bar Relief Flow Characteristics Supply 8.3 bar IP 65 and NEMA 4 equivalent 0.64 kg Pneumatic-Catalogue-GB-09/05
How to Order: (example) Overview E22 2 G 04 2 H E22 = 22 Series Series Input Signal 1 = 4 to 20 ma 2 = 0 to 5 VDC 3 = 0 to 10 VDC 9 = 2 bit, 4 pressure select G = N = R = Thread Types G thread NPTF thread MPT thread (Asia) Feedback Signal 1 = 4 to 20 ma 2 = 0 to 5 VDC 3 = 0 to 10 VDC 9 = 24 VDC switch 0 = 2 bit, 4 pressure select Feed back signal must match input signal, unless the 24 VDC switch feedback signal is chosen Port Tap Size 02 = 1/4 03 = 3/8 04 = 1/2 How it works 1. Microprocessor control circuit compares input signal to pressure sensor signal, which monitors the downstream regulated pressure. Microprocessor control circuit analyzes this data and energizes the appropriate control valve (supply or exhaust control valve). 2. If the regulated pressure is too low the microprocessor control circuit energizes the supply control valve, which allows supply pressure to increase the control pressure moving the rolling diaphragm downward opening the supply poppet allowing supply pressure downstream increasing regulated pressure. 3. If the regulated pressure is too high the microprocessor control circuit energizes the exhaust control valve, which allows the control pressure to vent to atmosphere, moving the rolling diaphragm upward opening the exhaust poppet and allowing downstream regulated pressure to decrease by exhausting to atmosphere. 4. If the regulated pressure matches the commanded pressure the microprocessor control circuit leaves the supply and exhaust control valves de-energized keeping the control pressure constant. Input Signal Power Supply Exhaust Control Valve Supply Control Valve Control Supply Microprocessor Control Circuit Supply Valve Supply Sensor Rolling Diaphragm Exhaust Poppet Input Signal Microprocessor Control Circuit Regulated Control H = Exhaust Control Valve Exhaust Regulated Sensor Regulating 0-10 bar regulating pressure range Supply Poppet Pneumatic-Catalogue-GB-09/05 663
E22 Series Proportional Regulator Dimensions Pin 4 Monitor Output Pin 1 + 24 VDC Micro female 90 degree Micro female straight Analog pin configuration shown. For additional pin configurations see Pin 3 Common 0 VDC Pin 2 Command Shown with optional bracket Dimensions [mm] A B C D E F G H J K L M N P R S T U 141.5 10.4 32.8 9.7 46.5 76.2 2.5 40.1 25.4 43.2 36.1 4.8 4.7 45.7 111.3 60.5 55.1 86.9 664 Pneumatic-Catalogue-GB-09/05
M12 Female Connector Accessories view on mating side M12 straight female connector Dimensions [mm] Description A B C D E Weight Order Shut Off Valve Description G-thread Order Code NPTF-thread MPT-thread Shut off valve, ports 1/4 VS22G02 VS22-02 VS22R02 Shut off valve, ports 3/8 VS22G03 VS22-03 VS22R03 Shut off valve, ports 1/2 VS22G04 VS22-04 VS22R04 Diverter Block Description G-thread Order Code NPTF-thread MPT-thread Diverter block, ports 3/8 DK22G03 DK22-03 DK22R03 Bracket Muffler Kit Description Order Code view on mating side approx. [kg] M12 elbow 5 pin female connector, without cable 35.0 20.0 SW19 M12x1 27.5 0.025 230-956 M12 straight 5 pin female connector, without cable 52.0 20.0 SW19 M12x1 0.033 230-957 M12 elbow female connector Code Bracket muffler kit BRK-E22 Note: Bracket / Muffler kit consists of muffler (M4MN), bracket (E22-21), muffler fitting (E22-29) Pneumatic-Catalogue-GB-09/05 665
22 Series Particulate Filter Accessories 22 Series Particulate Filter / Regulator Ports Size Bowl Type Polycarbonate CircleVision Metal 1/4 G thread F22BG02 F22BG02C F22BG02M 1/4 NPTF thread F22B-02 F22B-02C F22B-02M 1/4 MPT thread F22BR02 F22BR02C F22BR02M 3/8 G thread F22BG03 F22BG03C F22BG03M 3/8 NPTF thread F22B-03 F22B-03C F22B-03M 3/8 MPT thread F22BR03 F22BR03C F22BR03M 1/2 G thread F22BG04 F22BG04C F22BG04M 1/2 NPTF thread F22B-04 F22B-04C F22B-04M 1/2 MPT thread F22BR04 F22BR04C F22BR04M For more information on 22 Series Particulate Filter see page 584 Ports Size Bowl Type Polycarbonate CircleVision Metal 1/4 G thread P22BG02 P22BG02C P22BG02M 1/4 NPTF thread P22B-02 P22B-02C P22B-02M 1/4 MPT thread P22BR02 P22BR02C P22BR02M 3/8 G thread P22BG03 P22BG03C P22BG03M 3/8 NPTF thread P22B-03 P22B-03C P22B-03M 3/8 MPT thread P22BR03 P22BR03C P22BR03M 1/2 G thread P22BG04 P22BG04C P22BG04M 1/2 NPTF thread P22B-04 P22B-04C P22B-04M 1/2 MPT thread P22BR04 P22BR04C P22BR04M Digital / Vacuum Sensor DPS / DVS For more information on 22 Series Particulate Filter / Regulator see page 604 Port Thread R Setting range bar Tolerance at 20 C bar Static pressure max. bar Order Code With 2 m cable 1/8-0.5 to +10 ± 0.2 80 DPSG180P With 2 m cable 1/8-0.05 to -1 ± 0.3 80 DVSG180P For more information on Digital / Vacuum Sensor DPS / DVS see page 738 666 Pneumatic-Catalogue-GB-09/05