CREWCUT DIAMOND PRODUCTS LTD... here from the beginning Lower Dicker Upper Dicker A271 The Dicker Hailsham Crewcut Diamond Products Ltd Unit 2, Cranford Industrial Units, Berwick, East Sussex BN26 6TF Tel: 01323 871666 Fax: 01323 871999 Web: www.crewcutdiamond.co.uk PRICE LIST 2007 01323 871666
Crewcut Diamond Products Ltd Crewcut Diamond Products Ltd was established in 2004 by Graham Crewe in association with John Russell. All Crewcut s premium professional products are manufactured at Deudiam GmBH in Germany. Although a young company, Crewcut s main principals, Graham and John, share between them over 60 years of experience in the manufacture and sale of diamond machinery and tooling for use in the construction and stone industries. The combination of Crewcut s expertise in the latest bond and diamond technology with Deudiam s modern manufacturing facilities ensures that all our products give the optimum result in terms of performance and tool life, the two most important factors for the professional user. The range of quality professional and resale products are intended for use in floor and wall sawing, hand-held power tools, grooving and grinding, floor preparation, wire sawing and core drilling. They can be used to cut concrete, asphalt, brickwork, any type of hard refractory material and a wide range of natural stone from marble to the hardest granite. In addition to its range of professional diamond tooling, Crewcut also supplies core drilling machines together with motors and power packs, from companies such as Shibuya, DR Bender and Cedima. All of these are supported by a full maintenance and repair service. From its operational base at Berwick, East Sussex, products are supplied from stock on a next day basis to anywhere in the UK. Non-standard items can also be manufactured on a made to order basis in the minimum of time. In its relatively short career, Crewcut has established itself as a key supplier to some of the major diamond drilling and sawing contractors in the south east of England, and is rapidly expanding its operations elsewhere in the UK. This success is based on the quality of service, delivery, product integrity and technical support it provides to its customers across its entire product range. Contents Professional Range Wet Cutting Thin Wall Drills 4 Wet Cutting Core Drills 5 Accessories 6 Wet Cutting Floorsaw Blades 8 Wet Cutting Blades Looping and Grooving Blades 9 Wet Cutting Wallsaw Blades 10 Masonry Blades 11 Stone Blades Marble/Granite 12 Dry Core Drills & Accessories 14 Contractor Dry Blades 16 Ace/Deuce/Trio/Quad Dry Blades 17 Continuous Rim/Sintered/Turbo Blades 18 Cup Grinding Wheels/Grinding Plates & Mortar Raking Blades 19 Machinery Packages Drill Stands Motors and Accessories 20 Dr Bender Motors 21 Conditions of Sale 22
Wet Drill User Information Professional Thin Wall Core Drills To ensure the maximum performance from your Crewcut Diamond Core Drills the following rotational speeds and coolant flows are recommended. COOLANT FLOW LITRES/MIN Dia mm Flow l/min 20-52 0.5-2.0 57-82 2.0-3.0 87-152 3.0-4.0 162-250 4.0-6.0 275-350 6.0-8.0 400-500 8.0-12.0 600+ 15 These drills are designed to work with coolant. Insufficient water will shorten drill life and can result in segment loss on brazed bits. When drilling through reinforcement maintain coolant flow and keep a steady pressure on the drill bit. When using small diameter drills maintain a steady but not excessive pressure as they are not so robust as larger sized drills. Make sure the rig is mounted securely and ensure there is not excess play on the rig. Crewcut Professional Thin Wall Core bits have been developed for use on a wide range of reinforced concrete. Specially developed for the UK market they offer strong performance and good life on both rig and hand held operations. Size mm Eff L Type New Retip OD ID mm 8 3 150 Crown 46 39 10 6 49 39 12 8 300 51 40 14 10 53 41 15 10 55 42 16 12 55 42 18 14 58 44 20 15 60 45 22 17 62 49 24 19 64 54 25 20 64 54 26 21 65 54 28 23 67 55 30 25 68 58 32 27 70 60 35 30 75 64 36 30 75 64 38 32 77 66 40 34 80 68 42 36 82 70 45 39 Segs 85 71 46 40 86 72 48 42 86 72 50 45 86 72 52 46 86 72 57 51 90 72 62 56 94 72 65 59 112 74 68 62 112 76 72 66 112 78 78 72 112 87 82 76 118 89 92 86 134 92 102 96 140 96 107 101 142 98 112 106 142 99 117 111 142 99 121 115 152 114 127 121 170 123 132 125 180 135 142 135 190 143 152 144 199 150 CCD2TW Recommended for all types of reinforced concrete on rig or hand held applications, for wet use only. All bits are supplied with 1 /2 BSP male backend, extra lengths available to order at extra cost. Retips subject to our inspection. 3 4
Professional Diamond Core Drills Drilling Accessories Crewcut Professional Diamond Core Drills are manufactured to the highest quality and are now laser welded for additional strength up to and including 200mm diameter (all other diameters are brazed). They are manufactured with a tapered top segment for easy starting and are designed to give a good life and acceptable drilling rates in flint reinforced concrete. Suitable for use on medium to high powered motors. Size mm New Retip OD ID 45 38 85 70 48 41 84 70 52 45 84 70 57 50 99 85 62 55 94 85 65 58 112 85 72 65 112 90 78 71 112 90 82 75 118 90 92 85 127 90 102 95 127 100 107 100 131 105 112 105 152 105 117 110 158 110 125 117 164 115 127 119 175 124 132 124 190 124 142 134 195 140 152 144 203 140 162 154 230 160 172 164 255 160 178 170 261 170 182 174 267 180 187 179 276 190 200 192 295 190 212 212 340 200 225 217 393 210 250 241 435 230 275 286 463 240 300 291 490 240 350 341 530 260 400 390 585 280 450 440 610 290 500 490 790 320 550 540 814 350 600 590 898 400 700 690 1090 460 800 790 1310 480 900 890 1575 500 1000 990 1700 550 Crewcut offers an extensive range of drilling accessories, adaptors and extension rods. Additional sizes and specifications are available on request. Adaptors 1 /2 BSP x 1 1 /4 UNC male to male adaptor 23 1 /2 BSP x 1 1 /4 UNC female to female adaptor 23 Extension rods 260mm 1 /2 BSP Extension Rod 35 300mm 1 /2 BSP Extension Rod 48 500mm 1 /2 BSP Extension Rod 68 100mm 1 1 /4 UNC Short Extension Rod 23 300mm 1 1 /4 UNC Extension Rod 48 450mm 1 1 /4 UNC Extension Rod 75 500mm 1 1 /4 UNC Extension Rod 80 Quick release anchor bolts 42 CCD3 For use on Very Hard Reinforced Concrete CCD5 For use on Medium to Hard Reinforced Concrete CCD6 For use on Medium to more Abrasive Reinforced Concrete CCD10 For use on Asphalt and Abrasive materials For wet cutting rig mounted applications only. All bits supplied with 1 1 /4 UNC female threaded solid backends Standard length 450mm effective, extra lengths available to order at extra cost. 5 6
Wet Blade User information Professional Diamond Floorsaw Blades SOME WET CUTTING DO S AND DONT S DO ensure that there is an adequate water supply to both sides of the blade. DO ensure the blade is cutting parallel to the wheel axis. DO follow the manufacturers recommended pulley sizes and operating speeds for specific blade diameters. DO ensure that the drive belts are correctly tensioned so that all the available power is transmitted to the blade. DO ensure the blade cheek plates are clean and flat and the same size. DON T force the blade onto the shaft or mount the blade on an undersized shaft. DON T use paper washers to pack out the blade cheek plates. DON T operate the machine without a blade guard or with a damaged or open one. DO check the blade regularly for signs of cracking or undercutting on the steel centre and segments which can result in premature segment loss. Damaged or incorrectly fitted tools can cause serious injury. ALWAYS wear the correct personal safety equipment including head, ear and eye protection, gloves and safety footwear. WET CUTTING SPEED RECOMMENDATIONS Peripheral speed Dia mm RPM m/sec 350 2450 45 450 1900 45 600 1440 45 700 1230 45 750 1320 45 800 1070 45 900 960 45 1000 860 45 1200 720 45 Crewcut Professional Diamond Floorsaw blades are at the forefront of diamond tooling technology using bond and diamond systems that maximise the benefits of the latest diamond technology. All blades up to 1000mm are laser welded for enhanced product integrity during the working life of the blade. Grade Dia Width List mm mm PREMIUM C5P PREMIUM CCPC5P PREMIUM A10P TOPLINE C5T 350 2.7 285 400 3.5 420 450 3.5 438 500 3.8 450 600 3.8 660 600 4.5 700 600 4.8 715 650 4.8 790 700 4.5 845 750 4.5 980 770 4.5 1000 800 4.5 1100 900 4.5 1120 1000 4.5 1400 1200 4.5 1670 350 2.7 350 400 3.5 450 450 3.5 460 500 3.8 470 600 3.8 700 600 4.5 750 600 4.8 770 650 4.8 820 700 4.5 880 750 4.5 1080 770 4.5 1100 800 4.5 1200 900 4.5 1390 1000 4.5 1450 PREMIUM C5P :- General purpose floorsaw blade recommended for reinforced flint, limestone and gravel aggregate concretes on medium to high powered floorsaws. PREMIUM CCPC5P :- Recommended for electric floorsaws, for reinforced flint, limestone and gravel aggregate concretes. TOPLINE C5T :- Upgraded specification for use on high powered floorsaws Recommended for reinforced flint, limestone and gravel aggregate concretes. PREMIUM A10P :- Asphalt blade designed for use on medium to high powered floorsaws. Suitable for use on Petrol and Diesel powered floorsaws. 7 8
Professional Looping and Grooving Blades Professional Diamond Wallsaw Blades AG :- Soft specification for hard materials LOOPING BLADES Dia Width C5P CA11 mm mm 350 4 370 370 350 5 420 420 350 6 430 430 350 8 525 525 350 10 600 600 350 12 700 700 350 16 950 950 450 4 430 430 450 5 480 480 450 6 540 540 450 8 645 645 450 10 720 720 450 12 790 790 450 14 1000 1000 450 16 1100 1100 600 10 1000 1000 600 14 1350 1350 300 15 AG 370 Crewcut Professional Wallsaw blades incorporate the latest diamond tool technology and are in two formats to give the optimum choice for the contractor. The Short Cut range in both W3 and W8 types are designed for faster freer cutting. Wide Cut versions offer the option of more life on higher powered units and can be used on electric floorsaws. SHORT CUT WALLSAW RANGE Diameter Width Length Segment List mm mm mm Numbers 500 3.8 20 60 440 600 3.8 66 500 600 4.8 66 540 700 3.8 76 650 770 4.5 82 850 800 4.5 88 850 900 4.5 98 950 1000 4.5 104 1100 1200 4.5 128 1400 1500 4.5 160 1850 WIDE CUT WALLSAW RANGE Diameter Width Length Segment List mm mm mm Numbers 450 4.8 40 26 400 600 3.8 39 500 600 4.8 36 540 770 4.5 44 850 800 4.5 46 850 900 4.5 50 950 1000 4.5 54 1100 1200 4.5 62 1400 1500 4.5 75 1850 C5P :- Premium Concrete specification for general use on cured concrete on medium to high power floorsaws CA11 :- Harder specification for more abrasive applications green concrete, asphalt and joint raking applications GROOVING BLADES Dia Width Concrete Asphalt mm mm 300 3 150 150 300 4 160 160 CCWS W3/W3S :- Recommended for hard reinforced concrete in both Short and Wide ranges. Short cut blades are freer cutting. CCWS W8/W8S :- Recommended for medium reinforced concretes in both Short and Wide ranges. Short cut blades are freer cutting. Crewcut Wall saw blades are for wet cutting only. All blades are supplied with a 60mm bore and are drilled for Hydrostress flush cut as standard. Other bore sizes and drive pin holes available to order For machines below 15KW only use CCWS W3S specification. 9 10
Professional Diamond Masonry Blades Professional Stone Blades Crewcut Contractor Dry blades are a high quality product for the Professional contractor. Based on the latest specifcations this range is designed to give a good life at an economical price. MASONRY SERIES Premium range of laser welded Masonry Blades for use on a wide range of materials. These blades are all narrow gullet design to give a clean edge finish on table and bench saw applications. Diamond depth is 8.5mm on all blades. M3 M5 M8 M10 Dia Width Narrow Narrow Narrow Narrow mm mm Slot Slot Slot Slot 300 2.7 230 240 240 230 450 3.5 320 340 340 320 500 3.8 380 400 500 380 600 3.8 450 470 600 450 M3 recommended applications :- Hard engineering bricks, clay paviours, clay roof tiles, hard clay pipes, fused aluminia refractories and hard non abrasive products. M5 recommended applications :- Medium facing bricks, hard aggregae concrete paving slabs, medium hard block paviours, medium granite setts and natural stone. M8 recommended applications :- Stock bricks, medium hard concrete blocks and paving, York stone, medium alumina refractories and general purpose medium abrasive products. M10 recommended applications :- Concrete blocks up to 15Kn, lignacite blocks, coarse sandstone, abrasive silica and graphite refractories. CCMB 145 Marble Blades Quality blades economically priced suitable for all types of marble, in both standard and silent centre formats. Dia Width Impreg Seg STD SILENT mm mm mm nos 300 2.8 7 21 78 110 350 3.2 7 25 97 141 400 3.6 7 28 125 160 450 4.0 7 32 144 200 500 4.0 7 36 188 254 CCGB 155 Granite Blades Quality blades suitable for hard granites and some types of marble, in standard and silent centre formats. Dia Width Impreg Seg STD SILENT mm mm mm nos 300 2.8 15 21 121 154 350 3.0 15 25 154 192 400 3.2 15 28 194 235 450 3.4 15 32 228 285 500 3.6 15 36 275 345 600 4.3 15 42 344 422 CCGB 160 Granite Blades Quality blades suitable for softer more abrasive granites in standard and silent centre formats. Dia Width Impreg Seg STD SILENT mm mm mm nos 300 2.8 15 21 119 150 350 3.0 15 25 150 192 400 3.2 15 28 191 231 450 3.4 15 32 222 282 500 3.6 15 36 275 338 All blades manufactured to EN13236 standard. 11 12
Dry Drill User information Professional Diamond Dry Core Drills Use at least an 850 watt percussion drill fitted with a clutch for safety with variable speed control if possible. Pilot Drill the wall first with a 13mm (1/2 ) masonry drill. Then follow through with the diamond core drill fitted with a guide rod to start the hole. Remove the guide rod once the drill has started the hole. Hammer action must not be used when drilling with the diamond core drill. Use the machine at between 900 and 1300rpm. The harder the brick and the larger the core drill the slower the speed. Faster rotational speeds do not necessarily mean better penetration rates. Make sure the chuck is tightened before drilling. Make sure that the debris is cleared at regular intervals. A build up of debris will cause jamming, overheating, extensive clutch wear and possible damaged drills. Rotate the core bit when entering and exiting the hole. Try to keep the bit square on to the hole while drilling, to avoid jamming. Don t force the bit let it do the work. This will prolong the life of the bit and reduce breakages. If the bit starts to vibrate reduce pressure. Treat your bit with respect don t put a wrench on it to remove it from the adaptor. Always wear the appropriate safety equipment. GENERAL GUIDE TO DRILL SPEEDS ADAPTOR PACKS OD ID Eff L Type NEW RETIP mm mm mm 22 17 300 Crown 60 41 28 23 70 44 Segmental 32 25 150 3 48 35 38 31 3 48 35 48 41 4 58 41 52 45 4 60 41 65 58 4 65 41 78 71 4 75 55 91 84 5 85 65 107 99 5 95 67 117 109 5 110 75 127 119 5 135 90 152 144 5 150 90 162 154 7 160 115 172 163 8 190 130 178 169 8 210 150 182 173 8 220 170 200 191 9 240 180 Available as either slotted or unslotted drills. 38-152MM HEXAGONAL DRIVE ADAPTOR 1 /2 BSP MALE 19 GUIDE ROD AND DRIFT KEY SDS DRIVE ADAPTOR 24 GUIDE ROD AND DRIFT KEY ACCESSORIES GUIDE ROD 4 1 /2 BSP MALE TO MALE ADAPTOR TO SUIT TAPER GUIDE ROD 23 150MM HEXAGONAL EXTENSION ROD 17 250 HEXAGONAL EXTENSION ROD 18 200MM SDS EXTENSION ROD x 1 /2 BSP 28 Crewcut CCDC5 Dry Core Drills have been developed for use on a wide range of building materials encounterd in today s construction industry. Specially developed for the UK market they offer good life and performance and are laser welded to give added protection against segment loss. 13 14
Dry Blade User Information Professional Diamond Dry Blades SOME DRY CUTTING DO S AND DONT S DO read the information on the label regarding max recommended speed and safety instructions, and make sure the blade is the correct specification for the material being cut. DO ensure that the arrow on the blade corresponds to the direction rotation of the machine. DO ensure that fitting is carried out by a competent person. DO check that the flanges are clean and the same size before mounting the blade. DO check that the machine bearings and the blade arbor are not worn and that the blade runs true before use. DO make sure the bore size is the correct one for the machine, never fit a blade with an oversize bore to machine. DO use the correct blade guard for the machine. DO N0T use the blade for side grinding. Avoid tilting the blade when cutting. DO check the blade regularly for signs of cracking or undercutting on the steel centre and segments which can result in premature segment loss. Damaged or incorrectly fitted tools can cause serious injury. ALWAYS wear the correct personal safety equipment including head, ear and eye protection, gloves and safety footwear. DRY CUTTING SPEED RECOMMENDATIONS Peripheral speed Dia mm RPM m/sec 105 13,300 80 115 13,300 80 125 13,300 80 230 6,600 80 300 6,300 100 350 5,400 100 400 4,700 100 450 4,200 100 Crewcut Contractor Dry blades are a high quality product for the Professional contractor. Based on the latest specifcations this range is designed to give a good life at an economical price. CONTRACTOR SERIES Premium range of Dry Blades for the Professional contractor suitable for hand held machines and low powered floorsaws. C3W C5W C8W A10W Dia Width Wide Wide Wide Wide mm mm Slot Slot Slot Slot 300 2.7 160 160 160 180 350 2.7 180 180 180 200 400 3.5 240 240 240 270 400 4.5 325 450 3.5 280 280 280 315 500 3.8 325 325 325 365 600 3.8 420 420 420 475 C3N C5N C8N A10N Dia Width Narrow Narrow Narrow Narrow mm mm Slot Slot Slot Slot 300 2.7 180 180 180 285 350 2.7 200 200 200 225 400 3.5 265 265 265 305 450 3.5 320 320 320 360 500 3.8 385 385 385 440 600 3.8 470 470 470 530 Dia Width mm mm BETOMAX 115 2.1 50 230 2.6 110 C276C 230 2.6 110 C3 W/N and BETOMAX for hard non abrasive materials eg granite, engineering brick, hard concrete and glazed pipes. C5 W/N for medium hard materials and general purpose applications C276C Chasing blade for blockwork and brickwork C8 W/N for Asphalt over Concrete applications A10 W/N for Abrasive Concrete Blocks, Sandstone and Asphalt. All blades manufactured to EN13236 standard. 15 16
Professional Diamond Dry Blades Professional Products ACE Hard material blades for granites, clay pipes, clay paviors, concrete and hard facing bricks. mm mm mm 115 2.3 8 17 125 2.3 8 22 230 2.6 8 49 300 3.0 8 66 350 3.0 8 102 400 3.0 8 145 450 3.3 8 185 DEUCE General purpose blades for concrete products, paviors, lintels, and medium facing bricks mm mm mm 115 2.3 8 17 125 2.3 8 22 230 2.6 8 49 300 3.0 8 64 350 3.0 8 98 400 3.0 8 130 450 3.3 8 185 TRIO Blades for abrasive materials, blockwork, sandstone, soft bricks and asphalt. mm mm mm 115 2.3 8.5 25 125 2.3 8.5 27 230 2.6 8.5 55 300 3.0 8.5 69 350 3.0 8.5 110 400 3.0 8.5 140 450 3.3 8.5 185 QUAD Blades for steel, reinforced concrete, and hard materials in general. mm mm mm 230 3.0 8.5 110 300 3.2 8.5 160 350 3.2 8.5 185 Continuous Rim Blades Suitable for marble, slate, granite, floor and wall tiles and most hard materials. Wet or mm mm mm Dry 115 1.6 8 15 W or D 125 1.6 8 20 W or D 180 1.6 8 22 W or D 200 1.6 8 23 W only 230 1.8 8 34 W only 250 1.8 8 35 W only 300 2.5 8 37 W only 350 2.5 8 54 W only Sintered Segmented Blades General concrete products, kerbs, slabs, concrete paviors, lintels, and medium facing bricks. mm mm mm Dry 115 2.0 10 7 125 2.0 10 20 180 2.0 10 25 230 2.4 10 26 300 3.0 10 41 350 3.0 10 57 Turbo Blades General concrete products, kerbs, slabs, concrete paviors, lintels, and medium facing bricks on hand held machines. mm mm mm Dry 115 2.4 8 15 125 2.4 8 20 180 2.4 8 24 230 3.0 8 34 300 3.0 8 37 350 3.0 8 55 All blades manufactured to EN13236 standard. All blades manufactured to EN13236 standard. 17 18
Professional Products Professional Diamond Drilling Equipment Cup Grinding Wheels For stock removal of concrete and masonry, single row for fast stock removal, double row for longer life and better finish. Dia Single Double Turbo Spiral mm row row List List List List 115 34 50 125 40 57 98 180 108 93 Grinding Plates Quality heavy duty plates suitable for most types of concrete and grinding machines for wet or dry use. Standard Mortar Raking Blades Suitable for general mortar raking applications. Contractor Mortar Raking Blades Dia No of Impreg List mm Segs mm 240 10 10 373 240 16 10 438 mm mm mm 115 6 5 43 125 6 5 50 mm mm mm 115 6 5 98 125 6 5 120 230 6 5 178 230 10 5 320 Spec: 656B A quality blade designed for the professional contractor to give good life and performance. Crewcut Drillstands are designed to accept a wide range of motors acceptable to the professional Contractor. TS162 Drillstand with the RH1531 Hand held unit mounted for rig use. TS 403 Drillstand with the RH2231 Motor Shibuya Motors List RH1531 Hand Held 110v 3 Speed Drill Motor 800/2000/4150 rpm 838 1 1 /4 UNC / 1 /2 BSP with Carry Case. R2231 110v 3.1Kw 3 Speed Drill Motor 300/800/1300 rpm x 1 1 /4 UNC 912 R2531 110v 3.1Kw 3 Speed Drill Motor 150/300/600 rpm x 1 1 /4 UNC 1748 Shibuya Drill Rigs TSH163 Drillstand x 800mm Column with fixed base and 60mm Clamp ring 376 TSH163 Drillstand x 800mm Column with swivel base and 60mm Clamp ring 462 TS 252 Drillstand x 1000 mm Column with swivel base 450 TS402 Drillstand x 1000mm Column with fixed base 602 Packages RH1531 Hand held unit and TS163 Drillstand with swivel base 1300 Small Vacuum Pad 92 R2231 3 Speed Motor and TS252 Drillstand with swivel base 1362 R2231 3 Speed Motor and TS402 Drillstand with fixed base 1514 R2531 3 Speed Motor and TS402 Drillstand with fixed base 2350 Large Vacuum Pad 140 750 Drillstand x 1000mm Column with Swivel Base 1330 620 Drillstand x 1000mm Column with Swivel Base 962 630 Drillstand x 1000mm Column with Swivel Base 1150 Accessories Dovetail Quick Release Unit 190 Gate Plate Quick Release Unit 120 25:1 Fine Feed Unit for 750 Drillstand 250 1 /2 BSP x 1 1 /4 UNC M to M adaptor 23 1 /2 BSP x 1 1 /4 UNC F to F adaptor 23 250mm 1 /2 BSP Extension Rod 35 300mm 1 /2 BSP Extension Rod 48 500mm 1 /2 BSP Extension Rod 68 100mm 1 1 /4 UNC Short Extension 23 300mm 1 1 /4 UNC Extension Rod 45 450mm 1 1 /4 UNC Extension Rod 75 500mm 1 1 /4 UNC Extension Rod 80 Quick Release Anchor Bolts 42 Crewcut offers an extensive range of drilling motors, stands and general machine equipment. In addition to this we also have available a full maintenance and repair service for all machine types. Further models and specifications are available on request, please contact us for details. 19 20
Professional Diamond Drilling Equipment Crewcut Diamond Products Ltd DR BENDER MOTORS Part no List EBM33F HAND HELD UNIT 200701 840 110V 1.8kw 3 speed motor 520/1400/2800 rpm BBM33LL EXTRA 200870 1370 110V 3kw 3 speed motor 315/720/1090 rpm DOLPHIN DX6L 200679 2180 400V 6kw 3 speed motor 120/280/440 rpm Prices are valid from 1/4/2007 and subject to alteration without notice Conditions of Sale Hours of Business Monday to Friday 8-30am to 5-00pm Terms and Conditions 1 Crewcut Diamond Products Ltd Terms and Conditions of Sale apply to all items shown in this Price List. Copies available on request. 2 VAT is charged extra at the current rate. 3 Prices are correct at the time of going to press but are subject to change without prior notice. Carriage Charges 1 Diamond Products, Machine spares and Accessories Delivery in the UK Kingdom by Carrier Service :- DOLPHIN DX6L EBM33 For goods less than 250 net value, next day carrier service for delivery up to 6pm 7.50 per consignment. For goods over 250 net Next day carrier service free. Delivery before 9am 30 per consignment. Delivery before 10.30am 20 per consignment. Delivery before 12 noon 15 per consignment. A surcharge will apply for any deliveries to Isle of Man, Isle of Wight, Isles of Scilly, Central and Northern Scotland, Northern Ireland and the Irish Republic. 2 Additional surcharges will apply for delivery of Machinery items. BBM33LL Extra Please note :- Crewcut Diamond Products Ltd policy of continuous development may result in product specifications being altered at anytime without prior notice. Crewcut offers an extensive range of drilling motors, stands and general machine equipment. In addition to this we also have available a full maintenance and repair service for all machine types. Further models and specifications are available on request, please contact us for details. 21 22