Industrial Hydraulics Electric Drives and Controls Linear Motion and Assembly Technologies Pneumatics Service Automation Mobile Hydraulics Modern Explosion Protection ATEX valves for use in industrial controls ATEX Directive 94/9/EC
Publisher Bosch Rexroth AG D-97813 Lohr a. Main Zum Eisengießer 1 D-97816 Lohr a. Main Telephone ++49 (0) 93 52/18-0 Fax ++49 (0) 93 52/18-23 58 Telex 6 89 418-0 email documentation@boschrexroth.de Internet www.boschrexroth.de Document no. RE 00854/11.04 Printed by Hinckel Druck D-978877 Wertheim Reprinting or translation, either in whole or in part, only with the publisher's permission. Subject to revision.
Bosch Rexroth AG Industrial Hydraulics 3 Table of contents On/Off valves Type Type of protection page < Directional valve M-.SE 6 XD Flameproof enclosure 6 < Directional valve.we 6../.B..XD Flameproof enclosure 6 < Directional valve Type H-4WEH XD Flameproof enclosure 7 < Directional valve M-.SED 6 XE Increased safety 7 < Directional valve M-.SEW 6 XE Increased safety 8 < Directional valve M-.SEW 10 XE Increased safety 8 < Directional valve.we 6../.E..XE Increased safety 9 < Directional valve H-4WEH XE Increased safety 9 < Directional valve.we 6../.B..XH Intrinsic safety 10 < Directional valve.-.se 6 XH Intrinsic safety 10 < Directional valve M-.SED 6 XN Not lightining 11 < Directional valve.we 6../.E..XN Not lightining 11 Proportional valves < Proportional valve 4WRA 6.../.XEJ Increased safety 12 < Proportional valve 4WRZ XE Increased safety 12 < Proportional valve 3DREP 6../ XE Increased safety 13 < Servo-valve 4WS2EM 6 XN Not lightining 13 < Servo-valve 4WS2EM 10 XN Not lightining 14 < Servo-valve 4WS2EM 10 XH Intrinsic safety 14 Accessories < Pressure switch HED 8 XN Not lightining 15
Introduction 4 Industrial Hydraulics Bosch Rexroth AG Be on the Safe Side with Rexroth as your Partner for Industrial Hydraulics Our products are manufactured and delivered strictly observing the ATEX Directive. Due to detailed analyses, risks in design, production and operation are recognized in due course and ruled out right from the beginning. Our products therefore comply with the very stringent safety and health requirements laid down in Directive 94/9/EC. To ensure compliance with these high standards, new processes were integrated in our production sequence, or existing processes revised and updated. < Risk analysis and conformity assessment procedures < Type tests < Quality assurance with process representation and ensured traceability of products < Issue of a declaration of conformity, CE marking and Ex marking < Creation and provision of operating instructions for components, devices and power units < Filing of design documentation with notified bodies < Nomination of an explosion protection officer Group I (mines, firedamp / combustible dusts) Group II (explosive atmospheres consisting of gas/air or dust/air mixtures, mists or vapors) Category M Category 1 Category 2 Category 3 1 2 For equipment that ensures a very high level of protection Operation is ensured also in the rare case of incidents. Two independent means of protection, or functioning ensured if two faults occur dependently of each other. For equipment that ensures a high level of protection. Shutdown possible in the event of an explosive atmosphere. Suitable for normal operation and more severe operating conditions. G (gas; zone 0) D (dust; zone 20) For equipment that ensures a very high level of protection. Intended for the case of an expected permanent, frequent or long-term explosive atmosphere. Two independent means of protection, or functioning ensured if two faults occur independently of each other. No ignition sources even with rare faults. G (gas; zone 1) D (dust; zone 21) For equipment that ensures a high level of protection. Intended for the occasional occurrence of an explosive atmosphere. No ignition sources even with faults that regularly occur. G (gas; zone 2) D (dust; zone 22) For equipment that ensures the normal level of protection. Intended for the rare case that explosive atmospheres are unlikely to occur, or if they do occur are likely to do so far a short period only. No ignition sources during normal operation.
Bosch Rexroth AG Industrial Hydraulics 5 Einleitung Safety, Health and Quality To meet the exacting demands placed on health and safety of employees and to guarantee quality, comprehensive technical documentation has been produced. Each component is accompanied by a documentation package that includes the following items. < Written operating instructions in four languages and a CD-ROM with all further EU languages < General information about the use of equipment in potentially explosive atmospheres < Product data sheet < Product-specific instructions together with compulsory declaration of conformity The required technical product data sheets are, of course, also available online. Servicing and repair of equipment according to the old Directive is still permitted in the EU and worldwide. This is carried out quickly and competently by our Service Centers. Labour intensive and costly processes of this type can only be handled by a manufacturer such as Rexroth. Benefit from our know-how and the experience of our Product Units. The Conformity Assessment Procedure Depending on the category and equipment group, the following requirements must be met: Category to 94/9/EC Type of product Procedure Storing of documentation IM2/II2G/II2D IM2/II2G/II2D IM2/II2G/II2D II3G/II3D electrical and non-electrical electrical non-electrical electrical and non-electrical EC type testing by notified body EC type testing by notified body Conformity assessment by manufacturer Conformity assessment by manufacturer Rexroth + to notified body with confirmation Rexroth + to notified body with confirmation Rexroth + to notified body Rexroth
On/off valves 6 Industrial Hydraulics Bosch Rexroth AG 3/2- and 4/2-way poppet valves with solenoid actuation < Series 6X < Maximum operating pressure 420 bar < Maximum flow 12 L/min IM2; II2G < Type of protection of valve solenoid EEx dii; EEx dii CT4 as per DIN EN 50014/50018 Type M-.SE 6 XD RE 22047-XD-B2 I M2 Mining II 2G Gas, Mist, Vapour Type of protection of valve solenoid per DIN EN 50014/50018 EEx dii; EEx dii CT4 Flameproof enclosure 4/3, 4/2 and 3/2 directional poppet valves with wet pin DC or AC solenoids < Series 6X < Maximum operating pressure 315 bar < Maximum flow 60 L/min IM2; II2G < Type of protection of valve solenoid EEx dl; EEx dii CT4 as per DIN EN 50014/50018 Special features of seawater-resistant valves: < The external metal parts are galvanized or treated with anti-corrosion agent < The limited seawater resistance is defined by "SO329 in the ordering data. Type.WE 6../.B..XD RE 23178-XD-B2 I M2 Mining II 2G Gas, Mist, Vapour Type of protection of valve solenoid per DIN EN 50014/50018 EEx di; EEx dii CT4 Flameproof enclosure
Bosch Rexroth AG Industrial Hydraulics 7 On/off valves 4/2 and 4/3 directional control valves, pilot-operated < Size 10, 16, 25 and 32 < Series 4X, 6X, 7X < Maximum operating pressure 350 bar < Maximum flow 1100 L/min IM2; II2G < Type of protection of valve solenoid EEx dl; EEx dll CT4 as per DIN EN 50014/50018 Type H-4WEH XD I M2 Mining II 2G Gas, Mist, Vapour Type of protection of valve solenoid as per DIN EN 50014/50018 EEx dl; EEx dll CT4 Flameproof enclosure RE 24751-XD-B2 3/2 and 4/2-way poppet valves with solenoid actuation < Series 1X < Maximum operating pressure 350 bar < Maximum flow 25 L/min II2G < Type of protection of valve solenoid EEx em IIT4 as per DIN EN 50019/50028 Special features of seawater-resistant valves: < The external metal parts are galvanized or treated with anti-corrosion agent < The limited seawater resistance is defined by "SO321 in the ordering data Type M-.SED 6 XE Type of protection of valve solenoid as per DIN EN 50019/50028 II 2G Gas, Mist, Vapour EEx em IIT4 Increased safety RE 22049-XE-B2
On/off valves 8 Industrial Hydraulics Bosch Rexroth AG 2/2, 3/2 and 4/2-way poppet valves with solenoid actuation < Series 3X < Maximum operating pressure 420 bar < Maximum flow 25 L/min II2G < Type of protection of valve solenoid EEx em IIT4 as per DIN EN 50019/50028 Type M-.SEW 6 XE RE 22058-XE-B2 Type of protection of valve solenoid per DIN EN 50019/50028 II 2G Gas, Mist, Vapour EEx em IIT4 Increased safety 3/2 and 4/2-way poppet valves with solenoid actuation < Size 10 < Series 1X < Maximum operating pressure 420 bar < Maximum flow 40 L/min II2G < Type of protection of valve solenoid EEx em IIT4 as per DIN EN 50019/50028 RE 22075-XE-B2 Type M-.SEW 10 XE Group Category as per ATEX Application Type of protection of valve solenoid as per DIN EN 50019/50028 II 2G Gas, Mist, Vapour EEx em IIT4 Increased safety
Bosch Rexroth AG Industrial Hydraulics 9 On/off valves 4/3, 4/2 and 3/2 directional control valves with wet pin DC or AC solenoids < Series 6X < Maximum operating pressure 350 bar < Maximum flow 70 L/min II2G < Type of protection of valve solenoid EEx em IIT4 as per DIN EN 50019/50028 Special features of seawater-resistant valves: < The external metal parts are galvanized or treated with anti-corrosion agent < The limited seawater resistance is defined by "SO329 in the ordering data. Type.WE 6../.E..XE Type of protection of valve solenoid as per DIN EN 50019/50028 II 2G Gas, Mist, Vapour EEx em IIT4 Increased safety RE 23178-XE-B2 4/2 and 4/3 directional control valves, pilot-operated < Size 10, 16, 25 and 32 < Series 4X; 6X; 7X < Maximum operating pressure 350 bar < Maximum flow 1100 L/min II2G < Type of protection of valve solenoid EEx em IIT4 as per DIN EN 50019/50028 Type H-4WEH XE Type of protection of valve solenoid as per DIN EN 50019/50028 II 2G Gas, Mist, Vapour EEx em IIT4 Increased safety RE 24751-XE-B2
On/off valves 10 Industrial Hydraulics Bosch Rexroth AG 4/3, 4/2 and 3/2-way directional control valves with wet pin DC solenoids < Series 5X < Maximum operating pressure 210 bar < Maximum flow 20 L/min IM2; II2G < Type of protection of valve solenoid EEx ib II CT6 / EEx ib I as per DIN EN 50014/50020 Type.WE 6../.B..XH RE 23177-XH-B2 I M2 Mining II 2G Gas, Mist, Vapour Type of protection of valve solenoid per DIN EN 50014/50020 EEx ib II CT6 / EEx ib I Intrinsic safety 3/2 and 4/2-way poppet valves with solenoid actuation < Series 6X < Maximum operating pressure 420 bar < Maximum flow 4 L/min IM2; II2G < Type of protection of valve solenoid EEx ib II CT6 / EEx ib I as per DIN EN 50014/50020 Type E-.SE 6 XH and W-.SE 6 XH RE 22047-XH-B2 I M2 Mining II 2G Gas, Mist, Vapour Type of protection of valve solenoid as per DIN EN 50014/50020 EEx ib II CT6 / EEx ib I Intrinsic safety
Bosch Rexroth AG Industrial Hydraulics 11 On/off valves 3/2 and 4/2-way poppet valves with solenoid actuation < Series 1X < Maximum operating pressure 350 bar < Maximum flow 25 L/min II3G; II3D < Type of protection of valve solenoid EEx na II T140 C as per DIN EN 50021 and IP 65 T140 C as per DIN EN 50281 Type M-.SED 6 XN Type of protection of valve solenoid as per DIN EN 50021/50281 RE 22049-XN-B2 II 3G Gas, Mist, Vapour EEx na II T140 C; II 3D Dust IP 65 T140 C Not lightining 4/3, 4/2 and 3/2 directional control valves with wet pin DC solenoids < Series 6X < Maximum operating pressure 350 bar < Maximum flow 80 L/min II3G; II3D < Type of protection of valve solenoid EEx na II T140 C as per DIN EN 50021 and IP 65 T140 C as per DIN EN 50281 Type.WE 6../.E..XN Type of protection of valve solenoid as per DIN EN 50021/50281 RE 23178-XN-B2 II 3G Gas, Mist, Vapour EEx na II T140 C; II 3D Dust IP 65 T140 C Not lightining
Proportional valves 12 Industrial Hydraulics Bosch Rexroth AG 4/2 and 4/3 proportional directional control valve, directly operated, without electrical position feedback < Series 2X < Maximum operating pressure 315 bar < Maximum flow 22 L/min II2G < Type of protection of valve solenoid EEx em IIT4X as per EN 50019/50028 Special features of seawater-resistant valves: < The external metal parts are galvanized and olive-green chromated. Type 4WRA 6.../.XEJ RE 29055-XE-B2 Type of protection of valve solenoid as per DIN EN 50019/50028 II 2G Gas, Mist, Vapour EEx em IIT4 Increased safety 4/2, 4/3 proportional directional valves, pilot operated, without electrical position feedback < Size 10, 16, 25 and 32 < Series 7X < Maximum operating pressure 350 bar < Maximum flow 1600 L/min II2G < Type of protection of valve solenoid EEx em IIT4 as per DIN EN 50019/50028 Special features of seawater-resistant valves: < The external metal parts are galvanized or treated with anti-corrosion agent. Type 4WRZ XE RE 29115-XE-B2 Type of protection of valve solenoid as per DIN EN 50019/50028 II 2G Gas, Mist, Vapour EEx em IIT4 Increased safety
Bosch Rexroth AG Industrial Hydraulics 13 Proportional valves Proportional pressure-reducing valve in 3-way version < Series 2X < Maximum operating pressure 100 bar < Maximum flow 15 L/min II2G < Type of protection of valve solenoid EEx em IIT4 as per DIN EN 50019/50028 Special features of seawater-resistant valves: < The external metal parts are galvanized and olive-green chromated. Type 3DREP 6../ XE Type of protection of valve solenoid as per DIN EN 50019/50028 II 2G Gas, Mist, Vapour EEx em IIT4 Increased safety RE 29184-XE-B2 Servo directional control valve of 4-way design < Series 2X < Maximum operating pressure 210/315 bar < Maximum flow 48 L/min II3G; II3D < Type of protection of valve solenoid EEx na II T5 as per DIN EN 50021 and IP 65 T100 C as per DIN EN 50281 Type 4WS2EM 6 XN Type of protection of valve solenoid per DIN EN 50021/50281 RE 29564-XN-B2 II 3G Gas, Mist, Vapour EEx na II T5; II 3D Dust IP 65 T100 C Not lightining
Proportional valves 14 Industrial Hydraulics Bosch Rexroth AG Servo directional control valve of 4-way design < Size 10 < Series 5X < Maximum operating pressure 315 bar < Maximum flow 180 L/min II3G < Type of protection of valve solenoid EEx na II T4 as per DIN EN 50014/50021 < Ambient temperature range 30 C to +70 C Type 4WS2EM 10 XN RE 29583-XN-B2 Type of protection of valve solenoid as per DIN EN 50014/50021 II 3G Gas, Mist, Vapour EEx na II T4 Not lightining Servo directional control valve of 4-way design < Size 10 < Series 5X < Maximum operating pressure 315 bar < Maximum flow 180 L/min II1G < Type of protection of valve solenoid EEx ia IICT4 as per DIN EN 50014/50020 < Ambient temperature range 20 C to 60 C Type 4WS2EM 10 XH RE 29583-XH-B2 Type of protection of valve solenoid as per DIN EN 50014/50020 II 1G Gas, Mist, Vapour EEx ia IICT4 Intrinsic safety
Bosch Rexroth AG Industrial Hydraulics 15 Accessories Hydro-electric pressure switch < Size 10 < Series 1X < Maximum operating pressure 630 bar II3D < Type of protection of valve solenoid II3D T 100 C as per DIN EN 50014/50281 Type HED 8 XN Type of protection of valve solenoid as per DIN EN 50014/50281 II 3D Dust II3D Not lightining RE 50060-XN-B2
Bosch Rexroth AG Industrial Hydraulics Zum Eisengießer 1 97816 Lohr, Germany info@boschrexroth.de www.boschrexroth.com Printed in Germany RE 00854/11.04