118
117
Orbit Lock ORB1 140 70 14 Stainless 304, Die-Cast Zinc Alloy Polished Chrome WEIGHT 1.4kg 156 132 84 62 M6 mounting screws supplied Suitable for tough conditions Fits standard T-lock cutout ACCESSORIES Electronic Actuator Alternate Lock Barrel 3-Way Locking Rods 50 91.4 Adjustable. 0mm to 10mm grip range when using included 30mm Bolt 44.3 4.3 Handle Fascia Tongue Rotator Cam 10 74 1mm - 12mm Mount Material Thickness Whale Tail Compression Lock WTC140, WTP140 Cast WTC140 - Chrome Plated WTP140 - Black Powder Coated 141 41.1 70.1 140 18 HOLE FOR 6.35 PADLOCK 60.7 COMPRESSED 68 RELEASED 72 24.9 39.4 ADJUSTMENT 7 59.4 2 39.4 92.7 11 R8.4 0.76-3.1 PANEL RANGE R8.4 62 68 72.6 R16 86.4 119
Whale Tail Compression Lock W/ Electronic Actuator EWTC140, EWTP140 Cast EWTC140 - Chrome Plated EWTP140 - Black Powder Coated 171 64.5 41.1 70.1 140 18 60.7 COMPRESSED 68 RELEASED 72 24.9 39.4 ADJUSTMENT 7 59.4 2 39.4 92.7 241 R8.4 135 141 HOLE FOR 6.35 PADLOCK 72.6 86.4 ACTUATOR 11 0.76-3.1 PANEL RANGE R8.4 62 68 R16 Drop T Lock 9/01501, 9/01503, 9/01513 9/01501, 9/01503 - Stainless 9/01513-9/01501 to 9/01503 - Polished 9/01513-9/01501 - LH Mixed Keys 9/01503 - LH K/A FS880 9/01513 - LH K/A FS880 Polished die-cast hub, and neoprene seal under stianless cup washer for quality aesthetics, corrosion resistance and weatherproofing. Lift handle to turn latch bar with 5mm cam-form, adjustable through 12mm vertically. Latch travels 90 from centre (rest) position against stop, and is handed LH or RH (non-reversible). Four holes in flanges at 7.5mm diameter. Latch bar is adjusted by 2 X M10 nuts. Polished stainless steel with chrome handle and hub, or zinc plated mild steel. Optional black powder coat. 120
Drop T Lock 3 Way 9/01561/01 Stainless handle rod and guide Polished Complete system, supplied with rods and guides. Assembled on site. Can be purchased separately: 3/18702 - Spare rod 1050mm long 3/18716 - Spare guide Drop T Lock - Non-Locking 9/01505, 9/01515, 9/01505, - Stainless 9/01515, - 9/01505, - Polished 9/01515, - 30 30 7.5 70 9/01505, 9/01515 - Left Hand Drop-T Non-Locking Latches Identical in function to locking models, but with no lock cylinder and reduced pan dimensions. These are used when no secutrity is required or where free-opening is mandatory (fire equipment, etc) 102 90 69 120 68 Drop T Lock UES052047, UES052049, UES052048 Stainless Polished UES052047 Keyed alike. UES052049 Keyed differently. UES052048 Keyed alike, concealed fixing. 121
Drop T Lock 9/01571/01 120 69 7 21.5 70 Stainless Polished 124 95 8mm square shaft to suit. Locking. FS880 8 Drop T Lock 63.5 121 91247 - MX Zinc plated 150 Strainless steel fascia Vector Compression T-Handles 2750 Series w/ Stainless Handle Stainless Internal Pin Black Powder Coated Ergonomic design and styling. 30.8 12.8 82 131 8 9 (H) 18 Compression style T-handle. Stainless steel spring loaded padlock eye. Compression mechanism supported by roller bearing for smooth actuation. Left to right hand configuration with 180 rotation. 76.3 120 88 275024-06 275024-06 Vector 3-way drop T. Black powder coated handle with adjustable cam. Rotates 90. Gasket included. 3/16UNC studs. Tamper resistant locking mechanism. Can be used with rods to form a 2 or 3-point latching system. High impact BKV 133 plastic latching housing. 275063-68-S1 Vector lock drop T. Black powder coat handle, 1 point adjustable cam w/180 rotation. Integrated PUR seal making handle IP65 rated. Complete with dust shutter. M5 studs. 275021-06 Vector lock drop T. Black powder coat handle, 1 point adjustable cam w/180 rotation. Gasket included. Front fixing. 275020-31 Gasket, can be purchased separately. 122
Push To Close Latch 10204 Zinc Alloy Chrome Plated 14.5 88 82 109 62 Internal locking and release deadbolt GASKET action. Each lock set includes 2 overmoulded keys (CF301) and all mounting screws except striker plate screws. FRONT HOUSING 32-38 BACK HOUSING Recessed Paddle w/ Rotor Latch 9/00492, 9/00426 (Striker Pin) 9/00492 Stainless 9/00426 9/00492 Polished 9/00426 The paddle concept provides an attractive fully self-contained lock/latch, which is flush fitting and simple to install. Paddles with 2-step rotary latch The advantage of this new design is that the built-in rotary latch provides very positive slam-action and anti-burst protection, which prevents accidental opening through vibration or impact. Ideal for large mobile items of plant and equipment but not suitable for vehicle personnel doors. -Exceptionally smooth action, strong return on flap to prevent rattle, hardened steel claw and heavy duty locking cam on key cylinder. - Claw slams against striker pin, and is released when paddle flap is lifted -2-stage closing action of claw which is completely blocked when key is turned to locked position. Cannot be locked when claw is in open position. Non-handed, can be reversed. -Stainless models have pierced rim as shown, or internal welded studs. Gasket supplied. - FS as standard, optionally FT, 92, or DLP key types. Non-locking models are available. -Polished stainless steel, or mild steel, bright zinc-plated. Optional black powder-coat finish. -With stainless steel models, case and flap made in Grade 304. All other components mild steel, with die-cast cylinder and locking cam. -Highly competitive against market alternatives. Stainless models with pierced rim (& gasket) 9/00492 Rotary-latch paddle, locking 9/00426 Striker plate 123
Recessed Paddle Latch 9/00448/01, 9/00449, 9/00406, Stainless 9/00448/01, 9/00449 - Polished 9/00406 - Raw 95 140 9/00448/01 - Locking 9/00449 - Non-Locking 9/00406 - Loop Striker Bilnd-mounting models have four studs (M6x10mm) welded on inside rim. Striker made in 6mm diameter stainless rod, welded to stainless back plate. 83 94 108 48 5 110 12 36 9/00448/01 9/00406 7 20 55 48 31 Flush Paddle Locks 9/00408, 9/00418, 9/00418/01, 9/00418/01/IR Acetal Copolymer Black 9/00408 Non-locking 9/00418 Locking. FS keys are standard 9/00418/01 Keyed alike. Keyed FS 880 9/00418/01/IR A knob for inside release can be fitted to all slam-bolt models. This operates even when paddle has been locked from the outside. (Add suffix IR to part number) 9/00408 Paddles Slam-Bolt Models The paddle concept provides an attractive, fully self-contained lock/ latch, which is flush fitting and simple to install. These are the basic slambolt models, in either pierced rim or with internal welded studs. 9/00418 124
Anti-Burst Lock 3-Way Key Locking 0881/510 / Stainless 15 140 Black / SS Paddle 50 18 7 89 11.3 18 19 Flush Paddle Latch - Non Locking 91262 Stainless Polished 12 6 84 72 44 WEIGHT 220g 112 77 48 Flush Paddle Latch - Key Locking K/A 91264 Stainless 10.6 5 Polished 82 72 WEIGHT 266g 36 36 72 82 24 33 125
Flush Paddle Latch 0907/001 0907/215S Material Finish Weight Features 0907/001 350g 0907/003 370g Interior Release 0907/014 460g Interior Release - Keyed in Pairs 0907/015 460g Interior Release, K/A 64001 0907/514 / Stainless Black / SS Paddle 460g Interior Release - Keyed in Pairs 0907/215S / Stainless Black / SS Paddle 461g Interior Release, K/A 64001 Flush Paddle Lock 0912/401, 0912/410, 0912/418S, 0912/411 Stainless Polished 0912/401 Non-locking no interior release Weight: 410g 0912/410 Locking no interior release Weight: 470g 0912/410 0912/411 Locking no interior release All keys to pass Weight: 470g 0912/418S Locking with interior release Weight: 470g 126
Flush Paddle Latch FU902P/, FU902BB, FU902P/SS, FU902, FU902SS Stainless - FU902P/SS, FU902SS - FU902P/, FU902BB, FU902 120 105 76 - FU902P/, FU902 Black Powder Coated - FU902BB Polished - FU902P/SS, FU902SS A 21.9 75 80 92 A C/W Gasket FU902P/, FU902P/SS Non Locking FU902, FU902BB, FU902SS Locking Suggested outline of cutout 21 42.5 22 4.8 1.5 SECTION A-A Flush Paddle Latch - Weatherproof 9/05462, 9/00406 / Acetal Copolymer Black 9/00406 - Stainless steel striker plate The traditional paddle handle has been completely redesigned to make major improvements in function and specification. This new model will not corrode, will resist entry of water and is quickly installed without visible bolts or rivets. Resistant to water-penetration. Same aperture size as standard 4.25 x 5.5 paddles. No visible holes, integral gasket, quickly installed into simple cut-out with U-brackets provided.textured finish with selfcolour, corrosion resistant moulded materials. Hook-latch action with moulded block for smooth and secure engagement. The hook-latch design replaces conventional slam-bolts with a spring-loaded stainless steel hook that projects vertically from the back of the paddle case. This gives a much smoother action; doors close easily against a striker look and do not bounce back. The engagement positively resists vibration. 127
Push to Close Latch C2L1BP7, C2L1BP9, C2L1WP7, C2N1BP, C2NF1BP, C2NF1WP Zinc Alloy Black & White Powder Coated Heavy duty, low profile C2L1BP7 Locking, raised trigger, Black Keyed CH751 16 GRIP RANGE 1-24mm 15 35 C2 White C2L1BP9 Locking, raised trigger, Black Keyed SL019 C2L1WP7 Locking, raised trigger, White Keyed CH751 93 Non Locking, Flush Trigger Model C2N1BP Non Locking, without lock, Black C2NF1BP Non Locking flush trigger, Black C2NF1WP Non Locking, flush trigger, White 34 41 22 Large Compression Latch C5L1BP7, C5L2BP7, C5L2CP7, C5N2BP, C5L3CP7, C5L3BP7, C5L4BP7 Zinc Alloy Black Powder Coat & Chrome Plated Heavy duty, low profile C5L1BP7 Grip range 1-14mm, Locking, Keyed CH751 C5L2BP7 Grip range 15-29mm, Locking, Keyed CH751 C5L2CP7 Grip range 15-29mm, Chrome plated Locking, Keyed CH751 12 110 15 C5N2BP Grip range 15-29mm, Non-locking C5L3CP7 Grip range 30-45mm, Chrome Plated Locking, Keyed CH751 C5L3BP7 Grip range 30-45mm, Locking, Keyed CH751 C5L4BP7 Grip range 46-57mm, Locking, Keyed CH751 50 128
Lift & Turn Latches 62NBP, 62L1BP7 Zinc Alloy Black Powder Coated 60 56 GRIP RANGE Environmental sealing is achieved by using a cup gasket and sealing the mounting screw threads. Screw and lockwasher assembly M5 x 16. For door thickness greater than 6 calculate screw length using the following formula: Door thickness +10 Two flat keys provided. 62L1BP7 85.1 40 62NBP 4 34 3 COMPRESSION CAM RETAINING CLIP LOCKWASHER PRE-SET NUT SCREW & LOCKWASHER ASSEMBLY M5 FLARED MOUNTING BRACKET Large Compression Lock 10207B-CP, 10207B-BLK 30 110 10207B-CP - Chrome Plated 10207B-BLK - Black Powder Coated 57 Grip range 15-30mm 66 4.4 28 92 34.5 Small Compression Lock 10208B-CP, 10208B-BLK 114 87 10208B-CP Chrome Plated 10208B-BLK Black Powder Coat 41 Grip range 15-30 mm 70 24 59 129
Rotor Latches 9/00423 (LH), 9/00424 (RH) Series 400 Anti-Burst Latches The exceptionally neat and compact design of the Series 400 makes it suitable for confined spaces and thin doors. It provides 2-stage anti-burst latching, with mounting through the pivot points for increased strength. Travel 6.5mm Slam-action against striker pin, both hands available. Claw engages pin with 2-stage action, and is released by pull as shown on 2-lobe actuator arm. Clear zinc-plated throughout. Alternative actuator arms to special order. 21 Use with remote-action handles, turn buttons, wire and rod linkages, etc. Anti-Burst Properties When ring-tested, these latches can achieve values in excess of 8-9 KN* transverse load in fully latched condition. However, vehicle builders are responsible for evaluating performance in their own particular application and for ensuring that appropriate legislation is satisfied. *SAE & ECE11 Specification 55 o Rotor Latch Striker Pin 9/00425 Striker pin head 8mm x 4mm deep thread form 14 UNC Class 2A Not handed. 30 19 26 14 44 130
Coach Bin Door Lock 602-0405 600-0488 602-0579 - Plastic All other - 602-0579 - Black 602-0600 - Chrome finish 602-0620 - Black plastic head All other - 602-0405 - Coach bin lock complete assembly. 602-0579 - Lock handle 602-0600 - Lock cylinder 602-0620 - Lock key Other components to be ordered seperately: 600-0485 - Anti burst lock LH 600-0486 - Anti burst lock RH 600-0487 - Lock striker pin 600-0488 - Lock connecting rod 600 0488 600 0488 600 0486 600 0487 600 0485 600 0487 602 0405 black 24 Volt Electric Bin Door Kit 602-0573, 602-0562, 602-0658, 602-0552 602-0573 - 24 Volt central locking unit with key and remote 602-0562 - 24 Volt electric bin door kit 602-0658 - Handle and solenoid 602-0552 - Connector module 602-0573 602-0552 47 158 145 118 10 6.5 602-0562 36 81 95 131
Push Button Anti Burst Lock 9300/001, 9300/002 Plastic Black 9300/001 Push button handle, keyed in pairs. 9300/002 Push button handle, keyed alike This system is ideal for use on any door, especially tractor cabs etc. This handle is made from very tough plastic and operates by pressing the push button which in turn depresses the lock paddle which then opens the lock rotor. It is fitted by three screws from the inside of the cab door, and is lockable by means of a double side key. The latter has extra protection by way of a dust cover. This handle is primarily used in conjunction with the following anti burst locks. Anti Burst Type Cab Door Lock 9301/001, 9301/002, 9301/S 9301/001 Left Hand 9301/002 Right Hand This door lock is an anti burst type lock and is operated by the above push button handle as well as its own inside integral lever handle, which can very easily be turned into a remote operation, and is supplied complete with striker pin 9301/S 9301/S (Striker pin for above) 132
Toilet Door Lock 600-0595, 600-0596 Polyamide Black WEIGHT 400g Micro switch with sensor: 600-0595 - LH 600-0596 - RH Without Micro switch: 600-0611 - LH 600-E898 - RH Plant On Slam Latch 2115/001, 2115/002 WEIGHT 380g 2115/001 LH 2115/002 RH Left Hand Pressed steel case. Malleable iron tongue. PVC dipped handle. 133
Slam Latch - Heavy Duty 9/00805, 9/00806 Yellow 32 165 Follow bush to take 8mm steel shaft 9/00805 - LH 9/00806 - RH PVC Dipped handle. 64 19 25.7 9/00805 - LH 9/00806 - RH These are plant-on latches with a top-mounted handle, and exceptionally deep steel fellow-push operation by a standard 8.0mm shaft (normally closed off on the inside for visual appearance). Finish is yellow zinc-plated with plack plastic-coated handle. (Chromium-plating to special request only). 20 12.5 15.5 5 20 20 15 70 90 Internal Slam Latch 0891/001 (LH), 0891/002 (RH) WEIGHT 310g Right Hand Pressed steel case Malleable Iron tongue Cabin Screw-On Lock 600-0093, 600-0094, 580-0002 Complete with inner handle, supplied separately Left Hand Cabin Screw-On Locks Finish 600-0093 Left Hand Black 600-0094 580-0002 Right Hand Handle Black Chrome plated 134
Plant On Slam Latch 2121/003, 2121/004 WEIGHT 330g 2121/003 2121/003 Non-locking 2121/004 Locking Pressed steel case. Malleable iron tongue. Slam Latch General Purpose 3/17332, 3/17330 DIMENSION A 3/17330-10mm 3/17332-16mm Pressed case. Malleable Iron tongue 135
D-Latch Standard Pattern G3046PZN WEIGHT 240g D-Latch Improved Pattern G3047PZN, G8047PSS G3047PZN G8047PSS WEIGHT G3047PZN G8047PSS SS 165G 176G 136
End-Slam Latch 9/01187, 3/22387 9/01187 - Stainless 3/22387-9/01187 - Raw 3/22387 - Precision-made latches which have become motor-industry standards, with solid, machine-cut steel bolts and quick-fit attachment point if desired. Adjustable bolt-pull allows bolt projection to be varied, and bolts are reversible to nose-up position. Bolt projection variable, 9-16mm. Minimum load 5kg for full bolt travel. Mild steel model made in CR4. Stainless models in grade 304 with stainless bolt-pull, bolt and spring. Slam Latch 602-0138, 602-0141 Galvanised 602-0138 Spring catch (less hook handle) 602-0141 Spring catch, weight 180g Slam Latch 2467/001 10-15 34 38 5 Gold passivated WEIGHT 80g 17 40 5 18 137
Moulded Slam Latch w/ Pull Knob 9/01528, 9/01529, 9/01530 Acetal Copolymer Black The unique design of these latches allows fix through mounting to suit narrow door pillars, sections and channels. Moulded construction provides the benefits of light weight, self-lubricating action, and total corrosion resistance at an inexpensive price. Note: Knob & rivet can be supplied loose, for assembly after latch is installed in panel. 9/01528 Moulded slam latch, reversed knob 9/01529 Moulded slam latch, pulled knob fitment 9/01530 Moulded slam (no knob) Rotary Latch R5NGP Zinc Plated Heavy duty design. Concealed installation. High tensile load. Install with 4 M6 screws or rivets (not supplied) www.uesint.com www.uesint.com Budget Lock 3/09656, 3/09656SS 3/09656 3/09656SS 316 Stainless 3/09656 3/09656SS Raw Simple dead-bolt latches in which bolt can move 180 completely through the case. 3/09656SS Marine grade S/S 138
Hooked Budget Lock 3/16200, 3/16201 3/16200 LH 3/16201 RH Budget Locks UES421024, UES421025 UES421025 UES421024 - Left Hand UES421025 - Right Hand Budget Lock Key 2257/001, 2257/004 WEIGHT 2257/001 60g 2257/004 130g 2257/001 83mm 2257/004 130mm Rust Proof 139
Push to Close Latch A31BP, A32BP ABS, SS Spring Black 25 57 FINGER DEPRESSION 28 DOOR THICKNESS Single hole snap-in installation TOTAL GRIP Corrosion resistant materials 6.5mm A31BP - Suits 1.5mm Door thickness A32BP - Suits 2.0mm Door thickness FRAME 47 2 15 6.4 LATCH TRAVEL SLIDE SPRING Moulded Budget Lock (Set) 9/01956 Acetal Copolymer Black Self lubricating Comes with matching keeper Budget Lock Escutcheon 9/01960 Acetal Copolymer Black 180 deg opening, no spring return 140
Budget Lock Escutcheon 0130/001, 0130/002 Zinc Die-Cast 0130/001 Chrome Plated 0130/002 Black Powder Coated WEIGHT 20g Gravelly Fastener w/ Plate 0662/001 Die-cast Chrome Plated WEIGHT 70g Grip Range 15-30mm Striker Plate - Two Step 1/27107 Zinc Die-Cast 12 38 2 step striker for thicker doors/frames with longer depth of travel for full closure. Serrated base. 20 11 141
Internal Release Handle (Suits CT1178 Series) HA-602H Nylon Inside release handle with fluorescent mushroom head. Refrigeration Door Lock CT-1178 - with Offset Striker CT-1178/1 - with Flush Striker Chrome Plated 28 56 78 H = 90mm - Offset Striker H = 50mm - Flush Striker 72 56 69 52 38 Chrome slam latch with offset striker adjustable in 2.5mm increments and inside release handle. 6 This latch is widely used for large size insulated enclosures, such as cold stores or containerised units, where a surface-mounted latch is preferrable to avoid breaching the integrity of the door. H 57 10 Hole for Padlock (7mm) 156.5 10 50 With slam action against a roller striker, this system can be used on doors flush fit against the frame or offset between 35-70mm height. There is an inside safety punch handle for emergency release. 142
Striker plate - Two Step 1/27113 (Alt # 2268/001) Zinc Die-Cast Useful 2 step striker with adjustable mounting holes. Use with most slam latches, paddle latches. Serrated base. Striker Plate X1 Zinc Die-Cast CamLock Heavy Duty Weld-On UES0069 Suits 34mm OD Pipe 143
CamLock Light Duty Bolt-on - Suit 22mm OD Pipe K110-600 31.6 405.4 53.7 16 35.1 30 8.4 82.6 82.2 125.7 25 48 231.5 31 106.5 CamLock Medium Duty Bolt-on K110-500 113 9 57 Suits 27mm OD Pipe 385 410 CamLock Medium Duty Bolt-on UES0057, AJ0057 Suits 27mm OD Pipe UES0057 - Narrow Butt 44mm AJ0057 - Wide Butt 53mm 144
Magnetic Door Buffer & Holder 131011440 Black Traction force 500N. Ø27 tube Magnetic Door Buffer & Holder 131011441 Black Traction force 500N. Ø22 tube 145
Recessed Side Door CamLock ART10723 Stainless Polished Handle 29mm for 16mm Diameter Rod Recessed Side Door CamLock ART10116, ART10092 Stainless Polished Handle 35mm for 16mm Diameter Rod 336 59 102.5 102.5 59 5.5 5 152 139 76 ART10116-35 35 ART10092-29 303 24.5 14 146
Push Lock ART254 Plastic/Stainless Raw Slam Latch - Heavy Duty Full Assembly 23.44445 Mainly INDIVIDUAL PARTS 23.44445PH Upper zinc plated steel cam. Weight 0.255kg 23.44445GH Lock catch. Weight 0.225kg 23.44445AX Zinc plated steel pin DIA 16mm. Weight 0.27kg 23.44445CU base grey aluminium finish. Weight 0.5kg 23.44308PT Inside Teflon trigger. Weight 0.025kg 23.44445GU Graphite nylon bearing bracket. Weight 0.005kg 23.44445GO Grooved pin DIA 5mm x 26 self colour steel. 23.44445BA Chrome Plated locking cylinder. Weight 0.75kg 23.44445PO Zinc alloy handle grey Al finish. Weight 0.0.75kg Cam - Lower, Keeper - Lower 23.44445PB, 23.44445GB 23.44445PB - 23.44445GB - Cast Iron 23.44445PB - 23.44445GB -Raw WEIGHT 23.44445PB - 255g 23.44445GB - 150g 23.44445PB - Cam, Lower. 23.44445GB - Keeper, Lower. 147
Flush Pull Latches M1N1B,-C,-W,-SS; M1L1B,-SS UL94-HB ABS or 316 Stainless Ø61 32 26 13 Black, White, Cream polymer Satin Finish Stainless ABS Heavy duty design M1N1B - Non Locking Black M1N1C - Non Locking Cream M1N1W - Non Locking White M1N1SS - Non Locking Stainless M1L1B - Locking Black M1L1SS - Locking Stainless M1N1B, M1N1C, M1N1W, M1L1B - Grip range 0-8 mm M1N1SS, M1L1SS - Grip range 0-7 mm 21.4 3 32 Stainless For 12mm - 20mm applications use bracket M1WBK Bus Door Handle Kit VOLDDL Mild Stainless Turnbuckle & Nuts Zinc Plated & Grey P/C 57 46 61 130 108 For use in bus door locks 151 170 135 140 148
Push Button Latch 93NB, 93LB7 ABS Body; SS304 Keeper & Washer Black Push button opening with a single hole installation. 93NB - Non Locking 93LB7 - Locking CH751 55.2 22 38.1 19.1 5.6 31.8 Compartment Locks 1/27900, 1/27900/12, 1/27902, 1/27900/24 Zinc Die-Cast Chrome Plated 1/27900 - Mixed Keys 1/27900/12 - K/A FS901 1/27902 - K/A FS880 1/27900/24 - FS904 19 37 26 90 6 28 149
Compartment Locks CML1CP7 CML1CP7-AC CML1CP7-CW CML2CP7-AW CML2CP7-CW CMN2BPW-CW Chrome Plated Chrome Plated Chrome Plated Chrome Plated Black P/C Anti-clockwise Clockwise Anti-clockwise Clockwise Wing Head GRIP 16mm 16mm 22mm 22mm 22mm GRIP 6-26mm 6-26mm 12-32mm 12-32mm 12-32mm Keyed CH751 22 16 4 34 Grip Supplied with 2 cams 40 Wing Head Clip N Turn 1618001, 1618003, 1618005 POM Black GRIP (H) 1618001 13.5mm 1618003 18mm 1618005 25mm Quick tool-less assembly Panel thickness: Up to 4mm for 13.5mm and 18mm Up to 6mm for 25mm 150
E3 Compression Latch Keys Die-cast Zinc Alloy Compatible With: Chrome Plated ADAPTABLE to E3, E5 E3K7S - 7mm Square Driver E3K7T - 7mm Triangle Driver E3K8S - 8mm Square Driver E3K9R - 9mm Round Driver E3K3B - 3mm Double Bit UES E3 UES E5 8mm Square 7mm Square Round Double Bit 7mm Triangle E3 Compression Latch Die-cast Zinc Alloy Chrome Plated (E3L1CPXX) Black (E3L1BPXX) E3L1BP7S - 7mm Square Driver - Black E3L1BP7T - 7mm Triangle Driver - Black E3L1BP8H - 8mm Hex Driver - Black E3L1BP8S - 8mm Square Driver - Black E3L1BP9R - 9mm Round Driver - Black E3L1BPTH7 - T-Handle Locking Head Black E3L1CPTH7 - T-Handle Locking Head Chrome E3L1CP3P - Double Bit 3mm Driver Chrome E3L1BPDS - Slot Driver - Black E3L1BPWH - Wing Head Driver - Black E3L1SS7T - Stainless 7mm Triangle Driver - Black E3L1SS8H - Stainless 8mm Hexagon Driver - Black Double Bit 7 or 8mm Square 7mm Triangle UES KEY (Sold Separately). 9mm Round Slotted Head Wing Head ALL LATCHES COME WITH 3 CAMS OFFERING A GRIP RANGE OF 12MM - 81MM Double Bit Chrome 7mm Triangle SS 151
E5 Latch E5L1BP7S, E5L1BP7T Die-cast Zinc Alloy 20 Chrome Plated 0.5 Gasket 4.3 44 E5 Head Key Styles E5L1BP7S - 7mm Square Driver E5L1BP7T - 7mm Triangle Driver 7 Ø 31 19.4 LATCHES COME WITH 4 CAMS OFFERING A GRIP RANGES OF 6.5MM, 11.5MM, 15.5MM + 18MM 7 Ø 31 23 7mm Square 7mm Triangle Key 9mm Round E3SK9R 2.1 R5 R4.75 5.3 Zinc Plated Suits small E3S latch 41.5 50 Quarter Turn Latch E5N1BPWH 44 30 Zinc Plated, Black P/C Wing Head Supplied with 4 cams Grip Range: 7mm 10mm 12mm 20mm 20 Grip Range 48 152
Vibration Resistant Quarter-turn Fastener QT18 Zinc Die-Cast Chrome Plated Vibration resistant Assebled to IP 65/Nema 4 Complete with earth nut Zinc die-cast housing CP 32mm diamater X 18mm Fastener for any application requiring a quarter turn action to secure doors etc. The cam snaps in at the open and closed positions, preventing unintentional opening of the fastener due to vibrations. Cams sold separately Quarter-turn Latches We have a complete range. Please ask us for details if your application is not shown. P/N without projection H in mm 3mm Double Bit 5mm Double Bit 7mm Square 7mm Triangle 8mm Square-Slotted 8mm Square 8mm Triangle Slotted Quarter Turn Lock - 8mm Square QT18-8S-SS Stainless Polished Stainless steel quarter-turn fastener for applications where high corrosion resistance is required. Acid proof steel quality for extreme environments. The fastener can be installed assembled with cam. Handles and knobs an be used in combination with insert square 8/M6. 153
Cam Lock - Keyed Alike NAL-D Brass Body, Key and Cam Chrome Body, Nickel Finish Key Brass cylinder tubular lock cam. 90 cam rotation. Key is removable in locked position only. Keyed alike. Cut Out Dimensions Cam Lock - Mini - Keyed Alike NAL-S Zinc Alloy Chrome 90 cam rotation. Cam is reversible. NAL-S-1 : Key withdraws in locked position only (key works as a knob in unlocked position) NAL-S-2 : Key withdraws in both locked and unlocked positions NAL-S CAP : Black polythylene cover for dust Cut Out Dimensions 154