INSTALL GUIDE DOCUMENT NUMBER 9 REVISION DATE FIRMWARE FLC-GM(RS)-GM0-[FLRSGM0] HARDWARE FLRSGM0 ACCESSORIES FLPROG (REQUIRED) FLRF// (OPTIONAL) CARLINK ASCL (OPTIONAL) NOTICE The manufacturer will accept no responsability for any electrical damage resulting from improper installation of this product, be that either damage to the vehicle itself or to the installed device. This device must be installed by a certified technician. Please review the Installation Guide carefully before beginning any work. Automotive Data Solutions Inc. BEFORE INSTALLATION - Connect module to computer - Login to Weblink account - Flash firmware to module (module is not preloaded with firmware) - Use accessories accordingly (accessories are sold separately)
PAGE OF 0 DOC.: #9 VEHICLE LIST - OF DOOR UNLOCK PRIORITY UNLOCK TRUNK/HATCH RELEASE* Lucerne STD key AT 0- CTS STD key AT 08- DTS STD key AT 0- Escalade / ESV / Hybrid STD key AT 07- Escalade EXT STD key AT 07- SRX STD key AT 07-09 Avalanche STD key AT 07- Caprice STD key AT - Captiva Sport STD key AT 08- Equinox STD key AT 07-09 Express STD key AT 08- Impala STD key AT 0- Monte Carlo STD key AT 0-09 Silverado / Hybrid STD key AT 07- Silverado / Hybrid Premium Package STD key AT 07- Suburban STD key AT 07- Tahoe / Hybrid STD key AT 07- Traverse STD key AT Traverse with Auto Up/Down Windows STD key AT * If equiped ** If activated in vehicle settings Automotive Data Solutions Inc. 09-09- HEATED SEATS CTRL TAILGATE WINDOW RELEASE INSTALL TYPE RAP SHUTDOWN CTRL DOOR LOCK BRAKE PEDAL STATUS OUTPUT DISARM OEM ALARM TRUNK STATUS OUTPUT ARM OEM ALARM HOOD STATUS OUTPUT* X LOCK START/STANDALONE MOD. DOOR STATUS OUTPUT DATA IMMOBILIZER BYPASS 08- TACHOMETER OUTPUT YEAR Enclave STD key AT PUDDLE LIGHT CTRL** MODEL CHEVROLET CADILLAC BUICK MAKE FEATURES
PAGE OF 0 DOC.: #9 VEHICLE LIST - OF DISARM OEM ALARM DOOR LOCK DOOR UNLOCK PRIORITY UNLOCK PUDDLE LIGHT CTRL** TACHOMETER OUTPUT DOOR STATUS OUTPUT HOOD STATUS OUTPUT* TRUNK STATUS OUTPUT BRAKE PEDAL STATUS OUTPUT Savana STD key AT 08- Sierra STD key AT 07- Sierra Premium Package STD key AT 07- Yukon / XL / Denali / Hybrid STD key AT 07- H STD key AT 08-09 PONTIAC G8 STD key AT 08-09 Torrent STD key AT 07-09 Outlook STD key AT 07-0 Outlook with Auto Up/Down Windows STD key AT 07-0 Vue / Hybrid STD key AT 08-0 XL7 STD key AT 07-09 GMC HUMMER RAP SHUTDOWN CTRL ARM OEM ALARM HEATED SEATS CTRL X LOCK REMOTE START TAILGATE WINDOW RELEASE DATA IMMOBILIZER BYPASS TRUNK/HATCH RELEASE* YEAR 07- INSTALL TYPE MODEL 07- Acadia with Auto Up/Down Windows STD key AT MAKE Acadia STD key AT SUZUKI SATURN FEATURES * If equiped ** If activated in vehicle settings Automotive Data Solutions Inc.
PAGE OF 0 DOC.: #9 BOX CONTENTS - OF BOX CONTENTS MODULE 0 PIN CONNECTOR T-HARNESS VS LED BLUE BLACK BLACK 8 0 8 0 7 9 7 9 8 0 7 9 PROGRAMMING BUTTON LED A G F B E BLACK RF PORT/ WEBLINK PORT BLUE TELEMATIC PORT BLACK MS VS MS PIN CONNECTOR VS VS AFTERMARKET HOOD SWITCH AND CABLE C D 9 0 7 8 WHITE WARNING STICKER WEBLINK CABLE (required accessory sold separately) WEBLINK CABLE MODULE WEBLINK PORT COMPUTER USB PORT PIN BLACK CABLE Automotive Data Solutions Inc.
PAGE OF 0 DOC.: #9 COMPATIBLE ACCESSORIES - OF RF KIT (accessories sold separately) FLRF// RF KIT (NC) MODULE RF PORT ANTENNA TELEMATIC KIT (accessories sold separately) CARLINK FLHRNTM MODULE TELEMATIC PORT (NC) TELEMATIC KIT (accessories sold separately) FLHRNTM PN 0 MODULE TELEMATIC PORT 7 8 9 0 VEHICLE OBDII PORT (NC) Automotive Data Solutions Inc. OBDII CONNECTOR CAR CONNECTION
PAGE OF 0 DOC.: #9 Escalade / ESV / Hybrid Escalade EXT Avalanche Caprice Equinox Express CHEVROLET Impala Monte Carlo Silverado / Hybrid 07-07- 07- - 07-09 08-0- 0-09 07- POLARITY MODULE LOCATION COMPONENT LOCATOR 0- WIRE COLOR DTS 08- POSITION CADILLAC CTS 0- CONNECTOR TYPE Lucerne CONNECTOR COLOR 08- /Tan CONNECTOR NAME YEAR Enclave WIRE DESCRIPTION MODEL BUICK MAKE TYPE - WIRE CHART - OF Silverado / Hybrid 07- Premium Package Suburban Tahoe / Hybrid Traverse 07-07- 09- Traverse with Auto 09- Up/Down Windows Automotive Data Solutions Inc.
PAGE 7 OF 0 DOC.: #9 GMC HUMMER PONTIAC SATURN CONNECTOR TYPE POSITION WIRE COLOR POLARITY MODULE LOCATION COMPONENT LOCATOR Acadia with Auto 07- Up/Down Windows Savana Sierra Sierra Premium Package SUZUKI CONNECTOR COLOR 07- CONNECTOR NAME YEAR Acadia WIRE DESCRIPTION MODEL MAKE TYPE - WIRE CHART - OF 08-07- 07- Yukon / XL / Denali / Hybrid 07- H 08-09 G8 Torrent Outlook 08-09 07-09 07-0 Outlook with Auto 07-0 Up/Down Windows XL7 07-09 Automotive Data Solutions Inc.
PAGE 8 OF 0 DOC.: #9 TYPE - WIRING DIAGRAM - OF MODULE VEHICLE IGNITION SWITCH A G RF PORT/WEBLINK PORT B F TELEMATIC PORT VS A IGNITION CONNECTOR E C D VS A IGNITION HARNESS A MS VS B PK CONNECTOR B VS B PK HARNESS 8 0 8 0 7 9 7 9 MS B A C VEHICLE 8 7 0 9 BROWN/BLACK - PARKING LIGHT OUTPUT GRAY - RAP SHUTDOWN OUTPUT CONNECT IF NOT SUPPORTED BY DATA OPTIONAL PARKING LIGHT DRIVER DOOR PIN HORN GRAY/GREEN - HORN OUTPUT D 8 0 7 9 0 GRAY/WHITE - HOOD STATUS INPUT WITHOUT OEM HOOD SWITCH: INSTALL AND CONNECT TO AFTERMARKET HOOD SWITCH AFTERMARKET HOOD SWITCH Automotive Data Solutions Inc.
PAGE 9 OF 0 DOC.: #9 Captiva Sport cyl STD key 08-08-0 Vue cyl STD key 08-0 Automotive Data Solutions Inc. CONNECTOR TYPE POSITION WIRE COLOR POLARITY MODULE LOCATION COMPONENT LOCATOR Ignition Green 0 pin Pink (+) Ignition connector Passlock Green 0 pin 0 White (+) Ignition connector Ignition Black 0 pin Pink (+) Ignition connector CONNECTOR NAME CONNECTOR COLOR 08- SATURN Vue cyl / Hybrid STD key 07-09 WIRE DESCRIPTION MODEL Captiva Sport cyl / Hybrid STD key YEAR MAKE SRX STD key CHEVROLET CADILLAC TYPE - WIRE CHART - OF Passlock Black 0 pin 0 White/Black (+) Ignition connector Ignition Green 0 pin 0 Pink (+) Ignition connector Passlock Green 0 pin 0 White/Black (+) Ignition connector Ignition Black 0 pin Pink (+) Ignition connector Passlock Black 0 pin 0 White/Black (+) Ignition connector Ignition Green 0 pin 0 Pink (+) Ignition connector Passlock Green 0 pin 0 White/Black (+) Ignition connector
PAGE 0 OF 0 DOC.: #9 TYPE - WIRING DIAGRAM - OF MODULE VEHICLE IGNITION SWITCH CUT CONNECTOR FROM HARNESS A G RF PORT/WEBLINK PORT B F TELEMATIC PORT E C A VS D PINK IGNITION (+) YELLOW A PASSLOCK (+) REFER TO WIRE CHART FOR WIRE COLOR AND LOCATION VS IGNITION CONNECTOR (NC) MS VS B PK CONNECTOR B VS 8 0 8 0 7 9 7 9 B PK HARNESS MS B A C VEHICLE 8 7 0 9 BROWN/BLACK - PARKING LIGHT OUTPUT GRAY - RAP SHUTDOWN OUTPUT CONNECT IF NOT SUPPORTED BY DATA OPTIONAL PARKING LIGHT DRIVER DOOR PIN HORN GRAY/GREEN - HORN OUTPUT D 8 0 7 9 0 GRAY/WHITE - HOOD STATUS INPUT WITHOUT OEM HOOD SWITCH: INSTALL AND CONNECT TO AFTERMARKET HOOD SWITCH AFTERMARKET HOOD SWITCH Automotive Data Solutions Inc.
MODULE PROGRAMMING PROCEDURE - OF Close driver door. 07 Re-open driver door to wake up data bus. 08 Wait, LED will turn solid GREEN for seconds. (This may take up to minute.) Turn key to position. ACC 0 Insert key into ignition. ACC ON START Module Programming Procedure completed. ON START 0 09 PAGE OF 0 DOC.: #9 Turn key to ACC position. ACC ON START 0 Wait, LED will turn solid RED. 0 Turn key to ON position. ACC ON START Automotive Data Solutions Inc.
VALET MODE PROGRAMMING PROCEDURE - OF >> NOTE: In Valet Mode, the Remote starter is not functional. Keyless entry, Lock and Unlock will remain functional. See RF kit user manual for alternate valet mode programming. Time restriction. Complete next step within 7 seconds. ACC ON START >> PAGE OF 0 DOC.: #9 To exit valet mode: repeat steps to. Cycle ignition ON five times [x /ON] rapidly. ENGINE START STOP 0 0 Wait, LED will turn solid RED for seconds. Set ignition to position. ACC ON START ENGINE START STOP 0 Valet Mode Programming Procedure completed. Automotive Data Solutions Inc.
AFTERMARKET REMOTE PROGRAMMING - OF PAGE OF 0 DOC.: #9 AFTERMARKET REMOTE PROGRAMMING: NOTES I All aftermarket remotes must be programmed to the RF-Kit. Refer to the RF-Kit user guide for aftermarket remote features and programming procedures. Automotive Data Solutions Inc.
PAGE OF 0 DOC.: #9 MODULE NAVIGATION PROCEDURE - OF >> It is mandatory to exit the Module Navigation at the end of this procedure. Failure to exit the Module Navigation will drain vehicle battery. To exit the Module Navigation at any time: Follow STEP. 0 >> Module must be programmed to the vehicle. 0 >> Use the Module Navigation Chart on the next page. 0 Set ignition to position. 07 TO ACCESS THE MENUS: Press and hold programming button until LED turns solid GREEN. 08 IN THE MENUS: Press the programming button as many times as the menu number indicates. LED will flash GREEN an equal amount of times continuously. 09 ACC ON START TO ACCESS THE OPTIONS: Press and hold programming button until LED turns solid RED. 0 IN THE OPTIONS: Press the programming button as many times as the option number indicates. LED will flash RED an equal amount of times continuously. TO ACCESS THE SETTINGS: Press and hold programming button until LED turns solid GREEN. Configure every other setting and proceed to step. [Z] LED will flash GREEN as many times as the current (or default) setting number, continuously. MANDATORY: EXIT MODULE NAVIGATION. Press and hold programming button for 7 seconds. LED will flash RED rapidly. Release programming button. LED will turn. [Z] IN THE SETTINGS: Press the programming button as many times as necessary to access your setting. LED will flash GREEN an equal amount of times continuously. Module navigation completed. To return to the MENUS: exit the Module Navigation and redo the Module Navigation Procedure. >> Failure to exit the Module Navigation will drain vehicle battery. [Y] To save and return to the OPTIONS: Press and hold programming button until LED turns solid RED. [Y] LED will flash RED as many times as the current option number continuously. ENGINE START STOP 0 [X] Automotive Data Solutions Inc.
PAGE OF 0 DOC.: #9 [Y] OPTIONS [X] MENUS MODULE NAVIGATION CHART: NOTES I Default settings are listed in bold. II Make sure the option is covered on the vehicle before attempting to change the setting. 0 0 DISARM/UNLOCK BEFORE START RELOCK AFTER START RELOCK AFTER SHUTDOWN FORCE UNLOCK ALL ON FIRST PRESS 0 TAKEOVER 0 07 [Z] SETTINGS MODULE NAVIGATION CHART - OF FACTORY KEYLESS RS SEQUENCE CONFIGURATION 08 09 MODULE RUN TIME WAIT TO START DELAY ON ON ON ON ENABLE DISABLE* DISABLE 0 LOCK + UNLOCK + LOCK 0 LOCK + LOCK + LOCK 0 MIN 0 MIN 0 0 MIN 0 MIN 0 MIN 0 0 MIN 07 MIN 08 MIN SEC 0 SEC 0 08 SEC 0 0 SEC 0 SEC 0 0 SEC 07 SEC 08 0 SEC 0 *Vehicle will shutdown when a door is opened. Automotive Data Solutions Inc.
PAGE OF 0 DOC.: #9 [Y] OPTIONS [X] MENUS MODULE NAVIGATION CHART: NOTES [Z] SETTINGS MODULE NAVIGATION CHART - OF HORN EVENT TRIGGER CONFIGURATION -07 Technical Support only HORN CHIRPS WIDTH DOUBLE LOCK LOCK + UNLOCK 0 LOCK + UNLOCK + START 0 DOUBLE LOCK + START 0 msec msec 0 0 msec *Vehicle will shutdown when a door is opened. Automotive Data Solutions Inc.
[X] NUMBER OF PARKING LIGHT FLASHES DIAGNOSTIC REMOTE STARTER ERROR CODES - OF I WARNING: The following applies only when the parking lights are connected and supported by the system. 0 Foot brake is ON. 0 Hood is open. II After a remote starter failure, the parking lights will flash [X] number times to indicate an error code. See table. 0 Engine tach signal is lost. 0 System is in Valet Mode. 07 Vehicle is moving (VSS). 08 Glow plug timeout error. 09 RS not synchronized. Start vehicle with OEM key for sec before trying a new RS sequence. 0 CAN communication failure during RS sequence. REMOTE STARTER ERROR CODES: NOTES Automotive Data Solutions Inc. PAGE 7 OF 0 DOC.: #9
I II III DURING PROGRAMMING DURING REMOTE START WITH IGNITION Automotive Data Solutions Inc. DIAGNOSTIC TEST MODULE LED STATUS MODULE DIAGNOSTICS - OF Flashing RED Missing/wrong information from firmware or vehicle. Solid RED Module waiting for more vehicle information. Flashing GREEN Additional steps required to complete module programming. Solid GREEN then Module correctly programmed. No activity or module already programmed. Flashing RED Module incorrectly programmed. Solid RED Module incorrectly programmed. Flashing GREEN Module correctly programmed and operational. Solid GREEN then Reset in progress. Invalid ground when running status from remote starter. Flashing RED Module incorrectly programmed or connected. Solid RED Module not programmed. Waiting for more vehicle information. Flashing GREEN False ground when running status from remote starter. Solid GREEN then Reset in progress. Module at rest and ready for a remote start sequence. PAGE 8 OF 0 DOC.: #9
MODULE RESET PROCEDURE - OF Disconnect all connectors from module except the BLACK 0-PIN connector. 07 Reconnect all connectors. Disconnect the BLACK 0-PIN connector. 08 Repeat programming procedure. 0 PRESS AND HOLD the module s programming button while connecting the BLACK 0-PIN connector. >> Failure to follow procedure may result with a DTC or a CHECK ENGINE error message. 0 Wait, LED will flash RED. RELEASE programming button. 0 LED will turn RED for seconds. 0 Module RESET completed. Automotive Data Solutions Inc. PAGE 9 OF 0 DOC.: #9
INSTALLATION CHECKLIST - OF PAGE 0 OF 0 DOC.: #9 CHECKLIST WARNING: Vehicle engine will start many times. Test in a well ventilated area. Close all vehicle doors, hood and trunk. Press the LOCK button once [x] on the aftermarket keyfob. 9 Press the START/STOP button once [x] on the aftermarket keyfob to shut down vehicle. Question 7: Does the vehicle shut down? Question : Do the doors lock? YES: Go to next step. NO: Repeat step. If problem persists, press the brake pedal once [x] to shut down the vehicle and call technical support. RAP and auto light shutdown test YES: Go to next step. NO: Verify the remote programming, the RF connections and the wired door lock/unlock connections as illustrated in the wiring diagram, if applicable. Repeat the test and call technical support, if the problem persists. 0 Press the UNLOCK button once [x] on the aftermarket keyfob. YES: Go to next step. NO: Verify the RAP SHUTDOWN connections as illustrated in the wiring diagram. Repeat the test and call technical support if the problem persists. Question : Do the doors unlock? Question 8: Did the radio, interior controls and headlights turn off within 0 seconds after remote start shutdown? YES: Go to next step. NO: Verify the remote programming, the RF connections and the wired door lock/unlock connections as illustrated in the wiring diagram, if applicable. Repeat the test and call technical support, if the problem persists. Open hood. If not already installed, affix the mandatory orange warning sticker under the hood and proceed to next step. Press the TRUNK release button once [x] on the aftermarket keyfob if supported. Press the START/STOP button once [x] on the aftermarket keyfob to remote start vehicle. Question : Does the trunk or hatch open/unlock? Question 9: Does the vehicle remote start? YES: Close trunk or hatch and go to next step. NO: Verify the remote programming, the RF connections and the wired trunk/hatch connections as illustrated in the wiring diagram, if applicable. Repeat the test and call technical support, if the problem persists. Press the AUX button once [x] on the aftermarket keyfob if supported. Enter vehicle and close the doors. Question : Does the driver side sliding door open? Press the START/STOP button once [x] on the aftermarket keyfob to remote start vehicle. YES: Press the AUX button once [x] to close the driver sliding door and go to next step. 7 Wait for the vehicle to start. NO: Verify the remote programming and the RF connections. Repeat the test and call technical support, if the problem persists. 8 Press brake pedal. 7 Press the AUX button once [x] on the aftermarket keyfob if supported. YES: Go to next step. YES: The vehicle is not equipped with a factory hood pin. Install a mandatory aftermarket hood switch, then repeat the test. NO: Go to next step. Close hood. Question 0: Does the vehicle shut down? Question : Does the passenger side sliding door open? YES: Press the AUX button once [x] to close the passenger sliding door and go to next step. NO: Verify the remote programming and the RF connections. Repeat the test and call technical support, if the problem persists. NO: The module does NOT detect the brake pedal signal. Press the START/STOP button once [x] on the aftermarket keyfob to shut down vehicle, check connection as illustrated in the wiring diagram, if applicable, and call technical support. 9 Exit vehicle. 8 Press the START/STOP button once [x] on the aftermarket keyfob to remote start vehicle. 0 Installation checklist completed. Question : Does the vehicle remote start? YES: Go to next step. NO: Verify the remote programming, the RF connections and check the remote start error codes. Repeat the test and call technical support, if the problem persists. Automotive Data Solutions Inc.