HYDRAULIC COMPONENTS HYDROSTATIC TRANSMISSIONS GEARBOXES - ACCESSORIES Via M. L. King, 6-41122 MODENA (ITALY) Tel: +39 059 415 711 Fax: +39 059 415 729 / 059 415 730 INTERNET: http://www.hansatmp.it E-MAIL: hansatmp@hansatmp.it HT 01 / X / 106 / 0909 / E / N Hy-Trans Product Guide Innovation & Technology In Hydraulic Systems
Dear Sirs, We would like to welcome you to HANSA-TMP. The following gives you an insight to who we are and what we do. ABOUT US HANSA-TMP is an Italian manufacturer, that engineers hydraulic components to a very high standard. Its marketing department offers a multi-language team, all of whom are ready to help you in any possible way. OUR MANUFACTURED PRODUCTS Closed loop system variable displacement axial piston pumps in the sizes of 6 to 64 cm 3 /n. Open loop system variable displacement axial piston pumps in the sizes of 15 to 70 cm 3 /n. Spring loaded pressure released brakes up to 52 danm for orbit motors, small radial piston motors and other motors. Fixed and variable displacement axial piston motors in the size of 20 to 64 cm 3 /n. Wheel drive units with orbit or radial piston motors. Output torque from 1.500 up to 12.000 Nm. Should you need any information, you can access us on: http://www.hansatmp.it or contact us directly for further technical details and we will try to be as helpful as we can. HT 01 / X / 106 / 0909 / E Pag. 3
Variable Closed Loop System Axial Piston s - High rotation speed - Suitable for multiple pump assembly - Built in pressure relief valves Accessories: - By-pass valve - Manual displacement control - Hydraulic remote servo control - Electro-Hydraulic remote servo control - Zeroing control and special versions TPV 1000 For further information, please ask for cat. HT 16 / M / 1... TPV 6-7 6,95 TPV 8-7 8,88 TPV 9-7 9,65 TPV 11-7 11,2 300 TPV 12-7 12,8 210 3.900 TPV 13-7 13,58 TPV 15-9 15 TPV 17-9 17,16 280 TPV 18-9 18,44 270 TPV 19-9 19,20 200 250 3.200 8,8 - High rotation speed - Suitable for multiple pump assembly - Built in pressure relief valves Accessories: - Manual displacement control - Zeroing control and special versions TPV 20-9 20 TPV 30-9 30 TPV 2000 210 350 For further information, please ask for cat. HT 16 / M / 2... 3.900 12,2 Pag. 4 HT 01 / X / 106 / 0909 / E
Variable Closed Loop System Axial Piston s TPV 3200 - High rotation speed - Suitable for multiple pump assembly - Built in pressure relief valves Accessories: - Manual displacement servo-control - Hydraulic remote servo-control - Electro-Hydraulic remote servo-control - Automotive - Special versions TPV 21-9 21 TPV 28-9 28 250 350 3.600 For further information, please ask for cat. HT 16 / M / 5... 22 TPV 4000 cm 3 /n. TPV 28-9 28 TPV 34-9 34 TPV 38-9 38 TPV 41-9 41 250 350 3.900 For further information, please ask for cat. HT 16 / M / 28... 23 TPV 4200 TPV 32-9 32 TPV 38-9 38 TPV 45-9 45 TPV 50-9 50 250 350 3.900 For further information, please ask for cat. HT 16 / M / 4... 23 TPV 5000 TPV 46-9 46 TPV 50-7 50 TPV 64-9 64 250 400 3.600 For further information, please ask for cat. HT 16 / M / 6... 29 HT 01 / X / 106 / 0909 / E Pag. 5
Variable Open Loop Circuit Axial Piston s - High efficiency - Multiple optional control system - Suitable for multiple pump assembly - Electro-Hydraulic proportional pressure and Flow control type - Low noise level - Wide application ranges - Long life V Delivery under Input speed range unloading conditions cm 3 /n. lt/min. 1.500 1.800 min. max. V 15 15 250 22,5 27 13 V 18 17,8 250 26,7 32 13 V 23 23 250 35,4 41,4 22 V 25 25 210 37,5 45 22 500 1.800 V 38 37,8 250 56,7 68 26 V 42 42 210 63 76 26 V 50 51,5 210 77,2 92,7 55 V 70 69,7 210 104,5 125,4 56 For further information please ask for cat. HT 130 / A / 10... Variable Open Loop Circuit Axial Piston s - High efficiency - Multiple optional control system - Low noise level - Wide application ranges - Long life AR AR 16 15,8 AR 22 22,2 Minimum 165 210 500 For further information please ask for cat. HT 130 / A / 10... Intermittent 1.800 9,4 Pag. 6 HT 01 / X / 106 / 0909 / E
Fixed Axial Piston Motors TMF 300 - Excellent /Power ratio - High rotation speed - Excellent volumetric and mechanical efficiency Motor cm 3 /n. TMF 20-9 20 TMF 30-9 30 250 350 For further information please ask for cat. HT 16 / M / 7... 3.600 8 Motor cm 3 /n. TMF 34-9 34 TMF 46-9 46 TMF 50-7 50 TMF 64-9 64 TMF 500 - Excellent /Power ratio - High rotation speed - Excellent volumetric and mechanical efficiency 250 400 3.600 13 For further information please ask for cat. HT 16 / M / 7... Variable Axial Piston Motors TMV 550 - Excellent /Power ratio - High rotation speed - Excellent volumetric and mechanical efficiency Motor TMV 46-9 46 280 TMV 50-7 50 250 TMV 64-9 64 250 For further information please ask for cat. HT 16 / M / 7... 350 4.000 20 HT 01 / X / 106 / 0909 / E Pag. 7
Spring Loaded Disc Brakes - Breaking torque up to 52 danm - Suitable for different input / output shafts and flanges Brake Static Torque danm Pilot BTM Minimum Complete Opening For further information, please ask for cat. HT 58 / A / 30... BTM 03 3-4 3-5 BTM 07 6-8 4-6 BTM 11 10-12 7-9 BTM 18 17-19 11-13 350 BTM 24 23-25 11-13 1.000 9,5 BTM 32 32-33 15-17 BTM 42 40-44 15-17 BTM 50 48-52 17-19 Wheel Drive Unit Gearboxes - Available with or without static brake - Available with or without motor Wheel Drive Unit Gear Ratio S... - SM... Output Torque Nm Static Load N Input (without motor) S 050 - S 050 M 3,75 : 1 1.500 5.000 500 35 S 050 / 2 25 : 1 1.500 5.000 2.000 37 S 070 - S 070 M 4,75 : 1 2.500 5.000 1.000 43 S 070 / 2 34 : 1 2.500 5.000 2.000 46 S 120 - S 120 M 4,80 : 1 6.500 17.000 1.000 75 S 220 - S 220 M 6,60 : 1 12.000 17.000 1.000 90 For further information, please ask for cat. HT 58 / A / 40..., HT 58 / A / 70..., HT 58 / A / 90... and HT 58 / A / 95... Pag. 8 HT 01 / X / 106 / 0909 / E
Closed Loop s Typical Applications Two Wheels Walking Tractor Brush Cutter Concrete Floor Finisher Articulated Tandem Vibratory Roller Mowers De-Mining Flail HT 01 / X / 106 / 0909 / E Pag. 9
Closed Loop s Typical Applications Hydraulic Powerpacks Plastic Moulding Machine for industrial applications Hydraulic Presses Wood Splitting Machine Pag. 10 HT 01 / X / 106 / 0909 / E
HYDRAULIC COMPONENTS HYDROSTATIC TRANSMISSIONS GEARBOXES - ACCESSORIES Via M.L. King, 6-41122 MODENA (ITALY) Tel: +39 059 415 711 Fax: +39 059 415 729 / 059 415 730 INTERNET: http://www.hansatmp.it E-MAIL: hansatmp@hansatmp.it HEADQUATER IN ITALY PARTNERSHIP LOCATION HYDROMA HIDROMA SISTEMS HYDROMA PHU Czech Republic Poland Croatia HYDROMA SK GIDROMA SISTEMS MINO - Hydraulika Slovak Republic Belarus Czech Republic Distributor