s For Aerospace & Defense Precision Cleaners Coating Removers Surface Preparation Solutions Advanced s For Advanced Cleaning
Advanced s For Advanced Cleaning Total Solution. Vantage offers manufacturers, MROs and airlines the most complete range of approved cleaning products in the market. From manual cleaning to sophisticated parts washing, Vantage s sales and technical professionals are trained to help customers select, evaluate and implement the most appropriate products and processes. What s more, by working with top cleaning equipment manufacturers, we can present a turnkey approach that addresses requirements for both throughput and cleanliness. Trusted Brands For High Reliability Cleaning. For more than 30 years, Vantage has supplied cleaning products engineered to meet the aerospace industry s performance and compatibility requirements. Brands such as AXAREL, BIOACT, CleanSafe, LENIUM and RE-ENTRY have been trusted and approved by leading manufacturers and repair facilities in over 30 countries worldwide. Safety, Health & Environmental Responsibility are cornerstones of both our products and work practices. From reducing VOC emissions to eliminating exposures to improving fire risk, we have extensive experience helping customers find suitable replacements for acetone, IPA, MEK, MPK, mineral spirits, TCE (US EPA ruled carcinogen), PERC, methylene chloride, HCFCs and other hazardous solvents. Contact us today to learn how we can address your solvent substitution initiatives.
s for Manual Cleaning and Surface Preparation BIOACT 105 Widely-approved manual cleaning solvent. Used for general clean-up and preparing surfaces for bonding, coating, sealing. Replaces acetone, IPA, MEK, MPK and other hazardous solvents. Cleans adhesive residues, greases, hydraulic fluids, lubricants, oils, silicones, waxes. Lowers use cost and EHS impact. BIOACT 105 is available in both liquid and pre-saturated wipes. Bell Helicopter, Boeing D6-17487, Douglas CSD#1, Bombardier, CFM, GE Aviation, Gulfstream Aerospace, IAE, Pratt & Whitney, Rolls-Royce, United Airlines BIOACT 108 Boeing BAC 5750 approved manual cleaning solvent (BMS 11-14A). Listed in Boeing AMMs. Used for general clean-up and preparing surfaces for bonding, coating, sealing. Replaces acetone, IPA, MEK, MPK and other hazardous solvents. Cleans adhesive residues, corrosion inhibiting compounds (CICs), greases, hydraulic fluids, oils, silicones, waxes. AXAREL 1000 MIL-PRF-680 Type I qualified solvent for manual cleaning. Replaces acetone, IPA, mineral spirits and other hazardous solvents. Used for general purpose clean-up and surface preparation. MIL-PRF-680, Airbus, Boeing, Embraer, Honeywell, Lockheed Martin, Pratt & Whitney, United Airlines AXAREL 2000 MIL-PRF-680 Type II qualified solvent for manual and immersion cleaning. Replaces acetone, IPA, mineral spirits, PD-680 solvents. Lowers use cost and EHS impact. Higher flash point than AXAREL 1000 (144 F/62 C). AXAREL 4000 MIL-PRF-680 Type IV qualified solvent for manual and immersion cleaning. Cleans adhesive residues, lubricants, oils, greases, hydraulic fluids. Flash point above 140 F/60 C; Does not ship as a flammable. Mild citrus odor. RE-ENTRY Prepsolv Boeing BAC 5750 approved D limonene-based solvent. Listed in Boeing AMMs. Used for manual and immersion cleaning applications. Cleans tape adhesive residues, corrosion inhibiting compounds (CICs), greases, oils. 100% bio-based. AXAREL 4100 AXAREL 6100 AXAREL 9100 Series of solvent cleaners approved to Rolls-Royce CSS No 255 and OMat 1/257M. Used for manual and immersion cleaning applications. Replaces acetone, IPA, MEK, MPK, mineral spirits and other hazardous solvents. Series flash point range from 116-205 F (47-96 C).
s for Immersion and Spray Cleaning Applications BIOACT 280 BIOACT 280E Immersion solvent used to dissolve wax coatings and tooling compounds. Bath life averages 18-24 months. Replaces chlorinated solvents such as TCE and PERC. Non-hazardous. Very high flash point (285 F/141 C). For wax masking, ask a sales representative about AEROWAX HT. Boeing D6-17487, CFM, GE Aviation, Honeywell, IAE, Messier-Dowty, Pratt & Whitney, Rolls-Royce AXAREL 2000 MIL-PRF-680 Type II qualified solvent for immersion and manual cleaning. Also used in airless vacuum degreasing equipment and solvent basin systems. Drop-in for mineral spirits, PD-680 solvents, low flash point solvents. Flash point above 140 F/60 C; Does not ship as a flammable. AXAREL 3000 MIL-PRF-680 Type III qualified solvent for immersion and manual cleaning. Very high flash point (205 F/96 C); Ships as non-hazardous. Used in ambient or heated immersion cleaning equipment. CleanSafe 787C Aqueous cleaning solution for spray washers and agitated immersion systems. Cleans greases, metalworking fluids, lubricants, oils and other organic contaminants. Essentially non-foaming even at low operating temperatures. Safe on all metals alloys, composites, faying surfaces. Bell Helicopter, Boeing, CFM, Engine Alliance, GE Aviation, Honeywell, IAE, Messier-Dowty, Pratt & Whitney, Rolls-Royce, Safran, Spirit AeroSystems, United Airlines CleanSafe 686 Aqueous ultrasonic and immersion cleaning solution. Optimized cavitation with no cloud point at normal operating temperatures. Cleans buffing compounds, carbonaceous soils, greases, lubricants, metalworking fluids, oils. Excellent hard water-stability. Approved by Rolls-Royce and conforms to ASTM F-945. AXAREL 4100 AXAREL 6100 AXAREL 9100 Series of solvent cleaners approved to Rolls-Royce CSS No 255 and OMat 1/257M. Used for manual and immersion cleaning applications. Safe alternative to acetone, IPA, MEK, MPK, mineral spirits. Series flash point range from 116-205 F (47-96 C). AXAREL 9100 may be heated to improve cleaning performance. AXAREL 56 Boeing BAC 5200, BAC 5763 approved emulsion cleaning solvent. Used for immersion and spray cleaning. Removes greases and high melting soils. Approved for cleaning and degreasing anti-friction bearings. Water-rinsable.
s for Vapor Degreasing Equipment LENIUM FHD Fluorinated-based solvent used in vapor degreasing systems. Drop-in replacement for chlorinated and brominated solvents such as TCE, PERC, HCFCs, npb. Non-flammable; Non-ozone depleting; Low toxicity. Low boiling point (99 F/37 C). Does not require acid acceptance testing. Boeing BAC 5408, BAC 5750 approved. Listed in Boeing AMMs. Boeing, Lockheed Martin, Rolls-Royce, Safran LENIUM GS Solvent life is extended with our high-performance npb SuperBooster additive. Cleans adhesive residues, grease, lubricants oils, silicones, waxes. BAC 5408 approved. Bell Helicopter, Boeing, Lockheed Martin, Messier-Dowty, Praxair, Safran LENIUM ES Cleans flux residues from circuit assemblies. Extend solvent life with our high-performance npb SuperBooster additive. Lockheed Martin, Messier-Dowty, Safran, s For Coating Removal BIOACT 105 Widely-approved manual cleaning solvent. Cleans corrosion inhibiting compounds (CICs), mold release compounds, silicones, waxes, adhesive/sealant residues. Replaces acetone, IPA, MEK, MPK and other hazardous solvents. Used for general clean-up and preparing surfaces for bonding, coating, sealing. Available in both liquid and pre-saturated wipes. Bell Helicopter, Boeing D6-17487, Douglas CSD#1, Bombardier, CFM, GE Aviation, Gulfstream Aerospace, IAE, Pratt & Whitney, Rolls-Royce, United Airlines BIOACT 108 Powerful manual cleaning solvent. Cleans corrosion inhibiting compounds (CICs), mold release compounds, silicones, waxes, adhesive/sealant residues. Replaces acetone, IPA, MEK, MPK and other hazardous solvents. Used to prepare surfaces for bonding, coating, sealing. Boeing BAC 5750 approved cleaning solvent (BMS 11-14A). Listed in Boeing AMMs. BIOACT 280 BIOACT 280E Immersion solvent used to dissolve wax coatings and tooling compounds. Bath life averages 18-24 months. Replaces chlorinated solvents such as TCE and PERC. Non-hazardous. Very high flash point (285 F/141 C). For wax masking, ask a sales representative about AEROWAX HT. Boeing D6-17487, CFM, GE Aviation, Honeywell, IAE, Messier-Dowty, Pratt & Whitney, Rolls-Royce
s for Military and Defense Contractors AXAREL 1000 MIL-PRF-680 Type I qualified solvent for manual cleaning. Replaces acetone, IPA, mineral spirits and other hazardous solvents. Used for general purpose clean-up and surface preparation. MIL-PRF-680, Airbus, Boeing, Embraer, Honeywell, Lockheed Martin, Pratt & Whitney, United Airlines AXAREL 2000 MIL-PRF-680 Type II qualified solvent for manual and immersion cleaning. Also used in airless vacuum degreasing systems and solvent basin units. Replaces mineral spirits, PD-680 solvents, acetone, IPA. Flash point above 140 F/60 C; Does not ship as a flammable. AXAREL 3000 MIL-PRF-680 Type III qualified solvent for manual cleaning and immersion cleaning. Very high flash point (205 F/96 C); Ships as non-hazardous. May be heated to improve cleaning performance. AXAREL 4000 MIL-PRF-680 Type IV qualified solvent for manual and immersion cleaning. Cleans adhesive residues, lubricants, oils, greases, hydraulic fluids. Flash point above 140 F/60 C; Does not ship as a flammable. Mild citrus odor. LENIUM FHD Fluorinated-based solvent used in vapor degreasing systems. Drop-in replacement for chlorinated and brominated solvents such as TCE, PERC, HCFCs, npb. Non-flammable; Non-ozone depleting; Low toxicity. Low boiling point (99 F/37 C). Does not require acid acceptance testing. Boeing BAC 5408, BAC 5750 approved. Listed in Boeing AMMs. Boeing, Lockheed Martin, Rolls-Royce, Safran LENIUM GS Cleans adhesive residues, buffing compounds, greases, oils, silicones, waxes. Solvent life is extended with our high-performance npb SuperBooster additive. Boeing BAC 5408 approved. Bell Helicopter, Boeing, Lockheed Martin, Messier-Dowty, Praxair, Safran LENIUM ES Cleans a range of flux residues from electronic assemblies. Solvent life is extended with our high-performance npb SuperBooster additive. Lockheed Martin, Messier-Dowty, Safran,
s for Avionics, Electronic Assemblies and Rework BIOACT EC-7M Electronics cleaner for manual and immersion defluxing applications. Also cleans adhesives, inks, oils, greases and some conformal coatings from electronic assemblies. Suitable for cleaning equipment designed for IPA. AXAREL 2200 Solvent based manual and immersion cleaner. Removes flux residues from electronic assemblies. Also cleans uncured surface mount adhesives and raw solder paste from stencils and misprinted circuits. Eliminates white residues caused by ineffective flux removal with IPA. BIOACT EC-78 Aqueous cleaner for batch spray defluxing equipment. Cleans RMA and No Clean flux residues. Formulated for high temperatures and extended wash cycles. Protects surface finishes while maximizing performance in surface insulation resistance (SIR) testing. Requires no anti-foaming agents or other additives to maintain performance. BIOACT EC-7R Semi-aqueous solvent cleaner designed for immersion and spray defluxing equipment. Effective solution for removing RMA flux residues. Readily separates from water allowing close loop water recycling and zero discharge. Used at ambient temperature. BIOACT EC-88 Aqueous cleaner for conveyorized spray defluxing equipment. Superior RMA and No Clean flux residue removal. Protects surface finishes while maximizing performance in surface insulation resistance (SIR) testing. Designed for high throughput and long bath life. Requires no anti-foaming agents or other additives to maintain performance. LENIUM ES Cleans a range of flux residues from electronic assemblies. Solvent life is extended with our high-performance npb SuperBooster additive. Lockheed Martin, Messier-Dowty, Safran,
Vantage products are used to clean a wide range of components and assemblies. Engines and auxiliary power units Landing gears, wheels and brakes Aircraft exterior and interior surfaces Flight control surfaces Avionics and electrical components Breathing system components Rocket motor components Weapon systems and small arms Ground support equipment Honeycomb structures Composite structures Hydraulic line assemblies Vantage cleaning products are used in the following applications. General purpose clean-up Teardown and assembly Removal of greases, hydraulic fluids, lubricants, oils Removal of masking and fixturing waxes Removal of buffing and polishing compounds Removal of corrosion inhibiting compounds (CICs) Removal of adhesive residues Cleaning prior to nondestructive testing Cleaning prior to bonding, sealing, painting Cleaning prior to welding Vantage cleaning products are approved by the following companies. Airbus Bell Helicopter The Boeing Company Bombardier CFM International Embraer Engine Alliance Eurocopter GE Aviation Goodrich Corporation International Aero Engines Honeywell Aerospace Lockheed Martin Messier-Bugatti-Dowty Pratt & Whitney Praxair Rolls-Royce Safran Sikorsky Aircraft Scott Aviation Spirit AeroSystems Turbomeca United Airlines US Department of Defense UTAS Vantage Performance Materials 3938 Porett Drive Gurnee, Illinois 60031 USA T 800 432 7187 or 847 244 3410 F 847 249 6346 www.petroferm.com www.vantagegrp.com AXAREL, BIOACT, LENIUM and RE-ENTRY are registered trademarks of Vantage Specialties, Inc. AEROWAX and CleanSafe are trademarks of Vantage Specialties, Inc. A Vantage Specialty Chemicals Business NA Version 25 2/2017