Linear Rail Slides Highlights Drive Double acting pneumatic cylinder maximum drive force in extend and retract movement pressure force up to 1 N Guide Profile rail guide with ball circuit and wiper smooth torsion stiff Intake flange Direct connection of customer specific application possible on several sides with intake groove for adapter plates Direct connection of a further linear slide from the same series no additional adapter plates required easiest assembly Adapter plate Easiest connection and positioning of application low design effort *available as accessory 6 Data, Drawings, 3-D models, Operating Instructions - www.sommer-automatic.com
Series LS Terms Handling weight: Cycle: Maintenance: max. allowable extension load one complete movement of the piston forward and back maintenance free up to 1 Mio. cycle (please see the owner s manual for conditions, download from www.sommer-automatic.com) - long maintenance intervals keep costs down - long durability Design 1 Linear guide with recirculating ball and wiper - precise and rigid recirculating ball guide for high forces and moments capacity 2 Mounting groove - quick and cost effective positioning of adapter plates: Accessory, Art. No. AP...G 5 Mounting groove for magnetic field sensor Integrated, space saving position sensing 6 Drive - double-acting pneumatic cylinder 1 2 34 5 6 7 8 3 Mounting and positioning - Mounting possible from several sides for versatile positioning 4 Energy feed - alternate on several sides 7 Robust, lightweight - hard, coated aluminium alloy 8 Stroke limiting screw 7
Linear Rail Slides Time diagram Travel time against the extension load. [sec].2 Forces and Moments Max allowable static forces and moments on face A. Mb.16.12 Ma A Mc.8.4 Picture shows LS1-25.4.8 1.2 1.6 2 [kg] Included with purchase Loads diagram Divitation under load against the stroke. X/Y [mm].1.8.6 Fy Fx.4.2 Recommended accessories Stroke [mm] 6 12 18 24 3 Test run with recommended handling weight. Accessory Pneumatic fittings Order no.: DRVM3X4 Order no.: MFS24KHC Order no.: MFS24SKHC Cable straight plug Order no.: KAG5 Plug 3- pole Order no.: S12-G-3 Adapter plate Order no.: APLS1G 1 Data, Drawings, 3-D models, Operating Instructions - www.sommer-automatic.com
LS1-25 Order no.: LS1-25 Stroke [mm]: 25 Extension force max. [N]: 4 Retraction force max. [N]: 3 Recommended handling weight [kg]*: 2 Ma [Nm]: 3.2 Mb [Nm]: 3.2 Mc [Nm]: 5.1 Piston diameter [mm]: 1 Guide rail size [mm]: 7 Operating temperature [ C]**: 5-8 Air volume per cycle [cm³]: 3.6 Weight [kg]:.15 All data measured at 6 bar * on face A ** High-temperature-resistant model (up to 15 ) add T to part number 1 Fixing linear cylinder 2 Energy supply 3 Fixing application 5 Stop screw for stroke limitation 6 Inquiry groove for magnetic field sensor bl Groove for base plate A Air connection (retract) B Air connection (extend) K Air connection altemate (retract) L Air connection altemate (extend) *replaced by DIN EN ISO 4762 11
Linear Rail Slides Time diagram Travel time against the extension load. [sec].2 Forces and Moments Max allowable static forces and moments on face A. Mb.16.12 Ma A Mc.8.4 Picture shows LS1-5.4.8 1.2 1.6 2 [kg] Included with purchase Loads diagram Divitation under load against the stroke. X/Y [mm].2.16.12 Fy Fx.8.4 Recommended accessories Stroke [mm] 12 24 36 48 6 Test run with recommended handling weight. Accessory Pneumatic fittings Order no.: DRVM3X4 Order no.: MFS24KHC Order no.: MFS24SKHC Cable straight plug Order no.: KAG5 Plug 3- pole Order no.: S12-G-3 Adapter plate Order no.: APLS1G 12 Data, Drawings, 3-D models, Operating Instructions - www.sommer-automatic.com
LS1-5 Order no.: LS1-5 Stroke [mm]: 5 Extension force max. [N]: 4 Retraction force max. [N]: 3 Recommended handling weight [kg]*: 2 Ma [Nm]: 3.2 Mb [Nm]: 3.2 Mc [Nm]: 5.1 Piston diameter [mm]: 1 Guide rail size [mm]: 7 Operating temperature [ C]**: 5-8 Air volume per cycle [cm³]: 7.2 Weight [kg]:.2 All data measured at 6 bar * on face A ** High-temperature-resistant model (up to 15 ) add T to part number 1 Fixing linear cylinder 2 Energy supply 3 Fixing application 5 Stop screw for stroke limitation 6 Inquiry groove for magnetic field sensor bl Groove for base plate A Air connection (retract) B Air connection (extend) K Air connection altemate (retract) L Air connection altemate (extend) *replaced by DIN EN ISO 4762 13
Linear Rail Slides Time diagram Travel time against the extension load. [sec].2 Forces and Moments Max allowable static forces and moments on face A. Mb.16.12 Ma A Mc.8.4 Picture shows LS16-25.4.8 1.2 1.6 2 [kg] Included with purchase Loads diagram Divitation under load against the stroke. X/Y [mm].5.4.3 Fy Fx.2.1 Recommended accessories Stroke [mm] 6 12 18 24 3 Test run with recommended handling weight. Accessory Pneumatic fittings Order no.: DRVM5X4 Order no.: MFS24KHC Order no.: MFS24SKHC Cable straight plug Order no.: KAG5 Plug 3- pole Order no.: S12-G-3 Adapter plate Order no.: APLS1G 14 Data, Drawings, 3-D models, Operating Instructions - www.sommer-automatic.com
LS16-25 Order no.: LS16-25 Stroke [mm]: 25 Extension force max. [N]: 1 Retraction force max. [N]: 85 Recommended handling weight [kg]*: 6 Ma [Nm]: 6.4 Mb [Nm]: 6.4 Mc [Nm]: 9.6 Piston diameter [mm]: 16 Guide rail size [mm]: 9 Operating temperature [ C]**: 5-8 Air volume per cycle [cm³]: 9.6 Weight [kg]:.25 All data measured at 6 bar * on face A ** High-temperature-resistant model (up to 15 ) add T to part number 1 Fixing linear cylinder 2 Energy supply 3 Fixing application 5 Stop screw for stroke limitation 6 Inquiry groove for magnetic field sensor bl Groove for base plate A Air connection (retract) B Air connection (extend) K Air connection altemate (retract) L Air connection altemate (extend) *replaced by DIN EN ISO 4762 15
Linear Rail Slides Time diagram Travel time against the extension load. [sec].2 Forces and Moments Max allowable static forces and moments on face A. Mb.16.12 Ma A Mc.8.4 Picture shows LS16-5.4.8 1.2 1.6 2 [kg] Included with purchase Loads diagram Divitation under load against the stroke. X/Y [mm].1.8.6 Fy Fx.4.2 Recommended accessories Stroke [mm] 12 24 36 48 6 Test run with recommended handling weight. Accessory Pneumatic fittings Order no.: DRVM5X4 Order no.: MFS24KHC Order no.: MFS24SKHC Cable straight plug Order no.: KAG5 Plug 3- pole Order no.: S12-G-3 Adapter plate Order no.: APLS1G 16 Data, Drawings, 3-D models, Operating Instructions - www.sommer-automatic.com
LS16-5 Order no.: LS16-5 Stroke [mm]: 5 Extension force max. [N]: 1 Retraction force max. [N]: 85 Recommended handling weight [kg]*: 6 Ma [Nm]: 6.4 Mb [Nm]: 6.4 Mc [Nm]: 9.6 Piston diameter [mm]: 16 Guide rail size [mm]: 9 Operating temperature [ C]**: 5-8 Air volume per cycle [cm³]: 19.2 Weight [kg]:.3 All data measured at 6 bar * on face A ** High-temperature-resistant model (up to 15 ) add T to part number 1 Fixing linear cylinder 2 Energy supply 3 Fixing application 5 Stop screw for stroke limitation 6 Inquiry groove for magnetic field sensor bl Groove for base plate A Air connection (retract) B Air connection (extend) K Air connection altemate (retract) L Air connection altemate (extend) *replaced by DIN EN ISO 4762 17