Contents Section E Vacuum um Pumps & Blowers Series ower Tank Accessories Section E.1 ASME Code Float Level Indicators... E.1.2 Non-Code Float Level Indicators... E.1.4 Sight Eye Assemblies and Parts... E.1.6 Shutoff Components Ball Seat Clamps... E.1.7 Float Balls... E.1.7 Accessories and Parts Duckbill Assemblies and Spill Clean-up Attachments... E.1.8 Gearboxes and Replacement Parts... E.1.8 Fasteners Wingnut Kits... E.1.9 Camover Kits... E.1.9 Wingnuts... E.1.10 Clevis Pins... E.1.10 Hinge Pins... E.1.10 Gauges Vacuum and Pressure... E.1.11 Drive Couplers Coupler Assemblies - 8, 9, 10S... E.1.12 Coupler Assemblies - Jaw Type... E.1.13 Coupler Hub - Rexnord... E.1.14 Belts and Pulleys Pulleys - 3 and 4 Groove... E.1.15 Pulleys - Bushings... E.1.15 Belts Parts List... E.1.16 Section E Contents Toll Free 800-253-5500 Toll Free 24-Hour Fax 800-998-6834 P.O. Box 685 Traverse City, MI 49685 USA Rev. 15-03 NVE 2015 Product Catalog E.1.1
ASME Code Float Level Indicators Float Level Indicators - ASME CODE FEATURES: - High quality components and design keeps the product in the tank where it belongs, not leaking out the sides of your indicator. - Available in carbon, aluminum and stainless steel weldable bases. - External indicator arrow. WARNING: The Float level indicator with the carbon steel, stainless steel and/or aluminum weld sleeve must be disassembled before installation. Failure to do so will cause heat damage to the internal components of the float level indicator. The float level Indicator should be installed in the center line of the tank. F E Float Level Indicator Weld In Float Level Indicators Parts List PART NUMBER DESCRIPTION 400-320-8CW FLOAT LEVEL INDICATOR 8 CARBON - WELD - ASME CODE WEIGHT 400-320-8AW FLOAT LEVEL INDICATOR 8 ALUMINUM - WELD - ASME CODE 14.00 400-320-8SW FLOAT LEVEL INDICATOR 8 SS - WELD - ASME CODE 15.00 12.00 North America s Leading Manufacturer & Wholesaler of Industrial Vacuum Equipment E.1.2 NVE 2015 Product Catalog Rev. 15-03
Series Vacuum um Pumps & Blowers ower Float Level Indicators - ASME CODE Continued Stainless Shaft 400-011-319 Float Arm Weldment 400-030-319 400-020-319 Grease Fitting 400-028-319 6003-2RS Sealed Ball Bearing Washer - Stainless 400-026-319 Snap Ring 400-002-319 Indicator Arrow 400-036-319 400-024-319 Internal Snap Ring ASME Code Float Level Indicators 400-022-319 400-006-319-CW **Disassemble Before Welding** 414-800-TT 8 - Stainless Float Ball with thru tube Float Level Indicators Replacement Parts List 400-002-319 FLOAT ARM ARROW SS 0.45 400-006-320-SW FLOAT LEVEL HOLDER - STAINLESS - WELDED ASME CODE 2.00 400-006-320-CW FLOAT LEVEL HOLDER - CARBON - WELDED ASME CODE 2.00 400-006-320-AW FLOAT LEVEL HOLDER - ALUMINUM - WELDED ASME CODE 1.0 0 400-011-319 FLOAT ARM WELDMENT, SS FOR 8 FLOAT BALL 8 GUARD 6.00 400-014-319-8B FLOATBALL GUARD, 8 BOLT ON 1.0 0 400-016-319 RETAINING WASHER, 5/8 STEPPED SS 0.01 400-020-319 GREASE FITTING 5/16-24 UNF 0.01 400-022-319 SEAL,.750 ROD. U-CUP VITON 0.01 400-024-319 SNAP RING INTERNAL 1.378 BORE 0.01 400-026-319 SNAP RING EXTERNAL.500 SHAFT 0.01 400-028-319 BEARING 6003 2RS 35MM X 17MM X 10 00.1 400-030-319 BEARING.75 ID X 1.0 OD X 1.0 0.0 5 400-040-319 O-RING 2-210 VITON 75 DURO 0.01 400-042-319 BACKUP RING 8-210 SPIN PTFE 0.01 414-800-TT FLOAT BALL THRU 8 SS THRU TUBE 5/8 ID 3/4 OD FOR 1/2 ROD 2.00 SEE DESC 5/8-11 UNC NUT Toll Free 800-253-5500 Toll Free 24-Hour Fax 800-998-6834 P.O. Box 685 Traverse City, MI 49685 USA Rev. 15-03 NVE 2015 Product Catalog E.1.3
Non Code Float Level Indicators Float Level Indicators FEATURES: - High quality components and design keeps the product in the tank where it belongs, not leaking out the sides of your indicator. - Available in carbon, aluminum and stainless steel weldable bases. - External indicator arrow. WARNING: The Float level indicator with the carbon steel, stainless steel and/or aluminum weld sleeve must be disassembled before installation. Failure to do so will cause heat damage to the internal components of the float level indicator. The float level Indicator should be installed in the center line of the tank. F E Float Level Indicator Thread In Universal Float Level Indicators Parts List PART NUMBER DESCRIPTION 400-319-8CT FLOAT LEVEL INDICATOR 8 CARBON - THREADED WEIGHT 14.00 Weld In Float Level Indicators Parts List PART NUMBER DESCRIPTION 400-319-8CW FLOAT LEVEL INDICATOR 8 CARBON - WELD WEIGHT 12.00 400-319-8AW FLOAT LEVEL INDICATOR 8 ALUM - WELD 14.00 400-319-8SW FLOAT LEVEL INDICATOR 8 SS - WELD 15.00 Float Level Indicator Repair Kit PART NUMBER DESCRIPTION WEIGHT 400-319-0 REPAIR KIT - FLOAT LEVEL INDICATOR 0.30 North America s Leading Manufacturer & Wholesaler of Industrial Vacuum Equipment E.1.4 NVE 2015 Product Catalog Rev. 15-03
Float Level Indicators Continued Vacuum um Pumps & Blowers Series ower 21 Non Code Float Level Indicators Float Level Indicators Parts List ITEM 1 400-006-319-CT FLOAT LEVEL HOLDER - CARBON - THREADED 3.00 2 400-002-319 FLOAT ARM ARROW SS 0.45 3 400-030-319 BEARING.75 ID X 1.0 OD X 1.0 0.05 4 400-011-319 FLOAT ARM WELDMENT SS FOR 8 FLOAT BALL 8 GUARD 6.00 5 400-018-319 GASKET THD D INSERT VITON 0.15 6 400-016-319 WASHER, 5/8 STEPPED SS 0.01 7 414-800-TT FLOAT BALL 8 SS THRU TUBE 5/8 ID 3/4 OD FOR 1/8 ROD 2.00 8 400-006-319-SW FLOAT LEVEL HOLDER STAINLESS WELDED 2.00 400-006-319-CW FLOAT LEVEL HOLDER, CARBON WELDED 2.00 400-006-319-AW FLOAT LEVEL, ALUMINUM WELDED 1.00 9 400-028-319 BEARING 6003 2RS 35 MM X 17 MM X 10 0.01 10 400-020-319 GREASE FITTING 5/16-24 UNF 0.01 11 400-022-319 SEAL,.750 ROD. U-CUP VITON 0.01 12 400-024-319 SNAP RING INTERNAL 1.378 BORE 0.01 13 400-026-319 SNAP RING EXTERNAL.500 SHAFT 0.01 14 SEE DESC 1/2 FLAT WASHER 15 SEE DESC 1/2-13 UNC 18-8 SS 16 SEE DESC 5/8-11 UNC 18-8 SS 17 400-038-319 NUT JAM 2-12UN PLAIN 1.00 18 400-042-319 BACKUP RING 8-210 SPIN PTFE 0.01 19 400-040-319 O-RING 2-210 VITON 75 DURO 0.01 20 400-008-319 FLOAT LEVEL WASHER 3.75 SS 0.30 21 400-014-319-8B FLOATBALL GUARD, 8 BOLT ON 1.00 Toll Free 800-253-5500 Toll Free 24-Hour Fax 800-998-6834 P.O. Box 685 Traverse City, MI 49685 USA Rev. 15-03 NVE 2015 Product Catalog E.1.5
Accessories Sight Eye Assemblies Sight Eye Assemblies and Parts 2 and 3 Sight Eye Assemblies 400-2A SIGHT EYE - 2 ALU 6061 0.45 400-2C SIGHT EYE - 2 CARBON STEEL 1.00 400-3C SIGHT EYE - CARBON 1.00 2 and 3 Sight Eye Parts List 400-3C 400-2C 400-001-2A SIGHT EYE WELDMENT - 2 ALUM 6061 0.25 400-001-2C SIGHT EYE WELDMENT - 2 0.36 400-001-3C SIGHT EYE WELDMENT - 3 1.00 400-002-2 SIGHT EYE GLASS & O-RING - 2 0.15 400-002-3 SIGHT EYE GLASS & O-RING - 3 0.30 400-003-2 SIGHT EYE O-RING - 2 0.05 5 Sight Eye Assemblies 400-5S 400-5A SIGHT EYE 5 - ALU 6061 2.00 400-5C SIGHT EYE 5 - CARBON 4.00 400-5S SIGHT EYE 5 - SS 4.00 5 Sight Eye Parts List 400-001-5A SIGHT EYE WELDMENT - 5 1.00 400-001-5C SIGHT EYE WELDMENT - 5 3.00 400-001-5S SIGHT EYE WELDMENT - 5 SS 3.00 400-002-5 SIGHT EYE BOWL - 5 1.00 400-003-5 SIGHT EYE GASKET - 5 BUNA 0.01 400-004-5 SIGHT EYE HANDWHEEL - 5 0.10 400-005-5 SIGHT EYE PRESSURE PLATE - 5 0.10 North America s Leading Manufacturer & Wholesaler of Industrial Vacuum Equipment E.1.6 NVE 2015 Product Catalog Rev. 15-03
Shutoff Components Ball Seats Parts List Series Vacuum um Pumps & Blowers ower 416-200-B BALL SEAT - 2 BUNA 0.25 416-300-B BALL SEAT - 3 BUNA 1.00 416-300-E BALL SEAT - 3 EPDM 1.00 416-300-V BALL SEAT - 3 VITON 1.00 416-400-B BALL SEAT - 4 BUNA 1.00 416-400-E BALL SEAT - 4 EPDM 1.00 416-400-V BALL SEAT - 4 VITON 2.00 416-600-B BALL SEAT - 6 BUNA 2.00 416-800-B BALL SEAT - 8 BUNA 2.00 416-300-B Accessories Shutoff Components Ball Seat Clamps Parts List 416-100-1WC CLAMP WORM - 1-2 DIA 0.05 416-200-1WC CLAMP WORM - 2 BALL SEATS 0.06 416-300-1WC CLAMP WORM - 3 BALL SEATS 0.08 416-400-1WC CLAMP WORM - 4 BALL SEATS 0.09 416-600-1WC CLAMP WORM - 6 BALL SEATS 0.02 416-300-1WC Float Balls Parts List 414-600-SS 414-800-TT 414-800-SPUD 414-400-SS FLOAT BALL 4 SS 1.00 414-600-SS FLOAT BALL 6 304 SS 1.00 414-600-SPUD FLOAT BALL 6 SS W/SPUD 1.00 414-600-TT FLOAT BALL 6 SS THRU TUBE 5/8 OD 1/2 ROD 1.00 414-800-SS FLOAT BALL 8 SS 2.00 414-800-SPUD FLOAT BALL 8 SS 5/8 SPUD 2.00 414-800-TT FLOAT BALL 8 35 THRU 5/8 ID 3.4 OD FOR 1/2 ROD 2.00 414-1000-SS FLOAT BALL 10 SS 3.00 414-1000-SS 10 STAINLESS STEEL FLOAT BALL 3.00 Toll Free 800-253-5500 Toll Free 24-Hour Fax 800-998-6834 P.O. Box 685 Traverse City, MI 49685 USA Rev. 15-03 NVE 2015 Product Catalog E.1.7
Accessories Duckbill & Gearboxes Accessories and Parts Duckbill Assemblies and Spill Clean-up Attachment Parts List 420-2F DUCKBILL - 2 FEMALE CAMLOCK 7.10 420-2M DUCKBILL - 2 MALE CAMLOCK 7.20 420-3F DUCKBILL - 3 FEMALE CAMLOCK 7.60 420-3M DUCKBILL - 3 MALE CAMLOCK 7.30 420-4F DUCKBILL - 4 FEMALE CAMLOCK 10.14 420-6F DUCKBILL - 6 FEMALE CAMLOCK 10.15 420-3F Gearboxes Parts List 422-200-1 GEARBOX - 200 SERIES 1:1 RATIO R200-9AAF-A0190 14.30 422-400-1 GEARBOX - 400 SERIES 1:1 RATIO 1-1/4 R500-9AAF-A0206 28.30 422-500-1 GEARBOX - 500 SERIES 1:2 RATIO 1-3/8 SHAFT R500-9GGF-N 27.75 422-600-1 GEARBOX - 600 SERIES 2:1 RATIO R600-9GGC-JO527 64.40 422-400-1 Gearbox Replacement Parts 422-001-400 SNAP RING - 400 GEARBOX 0.05 422-002-400 SEAL SHAFT GEARBOX 200 X 125 X 31 0.05 422-002-500 SEAL SHAFT R500 GEARBOX 200 X 137 X 31 0.05 422-002-600 SEAL SHAFT GEARBOX 600 GEARBOX 0.05 422-003-400 BEARING (CUP CONE) - 400 GEARBOX #414276 & 414124 0.75 422-003-500 BEARING (CUP CONE) - 500 GEARBOX #14137A & 414276 0.70 North America s Leading Manufacturer & Wholesaler of Industrial Vacuum Equipment E.1.8 NVE 2015 Product Catalog Rev. 15-03
Fasteners Series Vacuum um Pumps & Blowers ower Wingnut Kits and Lubenut Kits - Non Code Parts List 284-KIT-C 284-KIT-CLN 284-KIT-C WINGNUT ASSY: WINGNUT EYEBOLT/CLEVIS/COTTER PIN 1.45 284-KIT-CLN LN ASSY: LN EYEBOLT CLEVIS PIN & CP 1.55 Accessories Fasteners 284-KIT-CC Wingnut Kits - ASME Code Parts List 284-KIT-CC WINGNUT ASSY ASME WINGNUT EYEBOLT CLEVIS PIN E-CLIPS 1.60 284-KIT-CS WINGNUT ASSY ASME SS LO-PRO 1.50 Camover Kits - Non Code Parts List 284-KIT-CO CAMOVER HANDLE KIT (6 PACK) 13.70 20 cast aluminum lid modifications occurred March, 2009. Call to ensure your cast aluminum lid is cam over compatible. Toll Free 800-253-5500 Toll Free 24-Hour Fax 800-998-6834 P.O. Box 685 Traverse City, MI 49685 USA NVE 2014 Product Catalog Rev. 8-8 Call for quantity pricing. E.1.9
Fasteners Accessories Fasteners Wingnut Parts List 284-101-CCP 284-100-CSP 284-103-CLNP LN W/WASHER GREASE CAP & ZERK 0.85 284-102-CPZ WINGNUT CARBON PLATED W/WASHER 0.75 284-101-CCP WINGNUT ASME PLATED W/WASHER 0.80 284-100-CSP WINGNUT CODE LO-PRO SS POLISHED 0.85 284-400-1CS Clevis Pins Parts List 284-400-1C NON CODE.625 X 2.26 0.20 284-400-1CS CLEVIS PIN ASME SS 0.20 Hinge Pins Parts List 280-703-C 280-703-C HINGE PIN - CARBON STEEL PLATE 0.40 280-703-CS HINGE PIN - CODE SS 0.35 North America s Leading Manufacturer & Wholesaler of Industrial Vacuum Equipment E.1.10 NVE 2015 Product Catalog Rev. 15-03
Fasteners Continued Eyebolts Parts List Series Vacuum um Pumps & Blowers ower 284-350-1CS EYEBOLT 4.5 X.625 ASME SS UNPOLISHED 0.55 284-350-1CSP EYEBOLT - 4.5 X.625 ASME SS POLISHED 0.40 284-351-1CC EYEBOLT - 6 X.625 ASME CARBON PLATED 0.50 284-351-1C EYEBOLT - 5 X.625 NON-CODE 0.45 Washers Parts List 284-100-SW WINGNUT WASHER SS - - - 280-875-AFW WASHER FLAT ALU 7/8 DIA 0.01 284-351-1C Accessories Fasteners & Gauges 280-704-S E-Clips and Cotter Pins Parts List 284-450-1CS 284-450-1CS E-CLIP -.625 DIA ASME SS 0.01 280-704-S COTTER PIN.125 X 1.5 SS 0.01 Gauges Vacuum and Pressure Gauges Vacuum and Pressure Gauges Parts List 408-350 408-250-LF GAUGE 2.5 VAC/PRES LIQ BOT CONN 1/4 NPT 0.45 408-350 GAUGE 3.5 VAC/PRES 1/4 NPT 0.45 408-400 GAUGE 4 VAC/PRES 1/4 NPT 0.55 408-400-LF GAUGE 4 VAC/PRES LIQ 1/4 NPT 1.00 Toll Free 800-253-5500 Toll Free 24-Hour Fax 800-998-6834 P.O. Box 685 Traverse City, MI 49685 USA Rev. 15-03 NVE 2015 Product Catalog E.1.11
Accessories Drive Couplers Drive Couplers Flange Couplers - 8S Parts List 424-008-100 COUPLER FLANGE 8S X 1 5.00 424-008-125 COUPLER FLANGE 8S X 1-1/4 5.00 424-008-138 COUPLER FLANGE 8S X 1-3/8 5.00 424-008-150 IN-ACTIVE COUPLER FLANGE 8S X 1.5 5.00 424-008-30MM COUPLER FLANGE 8S X 30MM 5.00 424-008-32MM COUPLER FLANGE 85 X 32MM 5.00 424-008-JE COUPLER FLANGE 8S EPDM 1.00 Flange Couplers - 9S Parts List 424-009-100 IN-ACT COUPLER FLANGE 9S X 1 8.00 424-009-125 COUPLER FLANGE 9S X 1-1/4 8.00 424-009-138 COUPLER FLANGE 9S X 1-3/8 W/5/6 KEYWAY 8.00 424-009-150 COUPLER FLANGE 9S X 1-1/2 W/3/8 KEYWAY 8.00 424-009-175 COUPLER FLANGE 9S X 1-3/4 7.00 424-009-225 IN-ACT COUPLER FLANGE 9S X 2-1/4 424-009-32MM COUPLER FLANGE 9S X 32MM 8.00 424-009-40MM COUPLER FLANGE 9S X 40MM 8.00 424-009-H IN-ACT COUPLER SLEEVE 9S HYTREL 2.00 424-009-JE COUPLER SLEEVE 9S EPDM 2.00 Flange Couplers - 10S Parts List 424-010-125 COUPLER FLANGE 10S X 1-1/4 13.00 424-010-156 IN-ACT COUPLER FLANGE 10S X 1-9/16 - - - 424-010-175 COUPLER FLANGE 10S X 1-3/4 12.00 424-010-187 COUPLER FLANGE 10S X 1-7/8 12.00 424-010-40MM IN-ACT COUPLER FLANGE 10S X 40MM 424-010-H COUPLE SLEEVE 10S HYTREL 3.00 424-010-JE COUPLER SLEEVE 10S EPDM 3.00 North America s Leading Manufacturer & Wholesaler of Industrial Vacuum Equipment E.1.12 NVE 2015 Product Catalog Rev. 15-03
Drive Couplers Continued Jaw Couplers Parts List Series Vacuum um Pumps & Blowers ower 424-150-100 COUPLER FLANGE LOVEJOY 150-1.00 X 1/4 KEYWAY 5.00 424-150-125 COUPLER FLANGE LOVEJOY 150-1.25 X 1/4 KEYWAY 4.00 424-150-125-HYD COUPLER FLANGE LOVEJOY 150-1.25 X 5/16 KEYWAY 5.00 424-150-1375 COUPLER FLANGE LOVEJOY 150-1.375 BORE 5/16 KEYWAY 8.00 424-150-150 COUPLER FLANGE LOVEJOY 150 X 1.50 BORE X 3/8 KEYWAY 5.00 424-150-175 COUPLER FLANGE LOVEJOY 150 X 1.75 BORE X 3/8 KEYWAY 5.00 424-150-30MM COUPLER FLANGE LOVEJOY 150 X 30MM 5.00 424-150-40MM COUPLER FLANGE LOVEJOY 150 X 40MM - - - 424-150-S SPIDER LOVEJOY 150 NBR 0.20 424-150-SH SPIDER LOVEJOY 150 HYTREL 0.20 424-190-100 COUPLER FLANGE HAYES L190 X 1 BORE 1/4 KEY 8.00 424-190-1375 COUPLER FLANGE HAYES L190 X 1-3/8 BORE 5/16 KEY 7.00 424-190-150 COUPLER FLANGE HAYES L190 X 1-1/2 BORE 3/8 KEY 7.00 424-190-150-PP COUPLER TACH L190 X 1.50 H3/8 KEY 8.00 424-190-175 COUPLER FLANGE HAYES L190 X 1-3/4 BORE 3/8 KEY - - - 424-190-875 COUPLER FLANGE HAYES L190 X 7/8 BORE 1/4 KEY 7.00 424-190-875S COUPLER FLANGE HAYES L190 X 7/8-13 SPLINE, 16/32 PITCH (HUB) 9.00 424-190-S SPIDER L190 NBR HAYES 0.30 424-225-175 COUPLER FLANGE LOVEJOY 225 X 1-3/4 - - - 424-225-187 COUPLER FLANGE LOVEJOY 225 X 1-7/8 - - - 424-225-S SPIDER LOVEJOY 225 NBR - - - 424-225-SH SPIDER LOVEJOY 225 HYTREL - - - Accessories Drive Couplers Toll Free 800-253-5500 Toll Free 24-Hour Fax 800-998-6834 P.O. Box 685 Traverse City, MI 49685 USA Rev. 15-03 NVE 2015 Product Catalog E.1.13
Accessories Drive Couplers Drive Couplers Continued Rexnord Coupler Parts List 424-200-125 COUPLER HUB E20 1-1/4 BORE 1/4 KEY 7.00 424-200-1375 COUPLER HUB E20 1 3/8 BORE 5/16 KEY 7.00 424-200-150 COUPLER HUB E20 1 1/2 BORE 3/8 KEY 7.00 424-200-175 COUPLER HUB E20 1 3/4 BORE 1/2 KEY 7.00 424-200-E20 COUPLER FLEX ELEMENT E20 4.00 424-050-100 COUPLER HUB E5 1 BORE 1/4 KEY 3.00 424-050-125 COUPLER HUB E5 1 1/4 BORE 1/4 KEY 3.00 424-050-E5 COUPLER FLEX ELEMENT 2.00 North America s Leading Manufacturer & Wholesaler of Industrial Vacuum Equipment E.1.14 NVE 2015 Product Catalog Rev. 15-03
Belts and Pulleys Pulley - 3 Groove Parts List Series Vacuum um Pumps & Blowers ower 430-100-003 PULLEY 3TB110 Q1 STYLE BUSHING 24 00 430-100-004 PULLEY 3TB36 P2 STYLE BUSHING 4.00 Accessories Belts & Pulleys Pulley - 4 Groove Parts List 430-100-006 PULLEY 4TB48-4.8 - USE P1 BUSHING 9.00 430-100-008 PULLEY 4TB110-11 Q1 BUSHING 27.00 Pulley Bushings - Split Taper Parts List 430-300-001 BUSHING G1 X 1 1/4 KEYWAY 0.25 430-300-002 BUSHING Q1 X 30MM BUSHING 8MM KEYWAY 4.00 430-300-003 BUSHING P2 X 1 1/4 KEYWAY 2.00 430-300-004 BUSHING Q1 X 32MM 10MM KEYWAY 4.00 430-300-005 BUSHING P1 X 7.5 3/8 KEYWAY 1.00 430-300-006 BUSHING SK X 1.5 3/8 KEYWAY 3.00 430-300-007 BUSHING SK X 1-3/4 3/8 KEYWAY 3.00 430-300-009 IN-ACT BUSHING P1 X 1-3/4 3/8 KEYWAY 1.00 Toll Free 800-253-5500 Toll Free 24-Hour Fax 800-998-6834 P.O. Box 685 Traverse City, MI 49685 USA Rev. 15-03 NVE 2015 Product Catalog E.1.15
Accessories Belts & Pulleys Belts and Pulleys Continued Belts Parts List 430-200-001 BELT GEAR 1.5 WIDE X 24 FOR 2000 ENGINE DRIVE 0.20 430-200-002 BELT 3 GROOVE GRIPBELT 65.8 2.00 430-200-003 BELT 4 GROOVE GRIP BELT 71.8 GBB X 70 4.00 430-200-004 BELT 3880 (#52880) TRUFLEX 5L 1.00 430-200-006 BELT BX56 COG V-BELT 57.8 DL - - - 430-200-007 BELT BX57 COG V-BELT 58.8 DL 1.00 430-200-009 BELT BX80 COG V-BELT 81.80 PD 1.00 430-200-010 BELT BX90 COG V-BELT 91.80 PD 4.00 430-200-011 BELT CX83 TRI-POWER V-BELT 87.0 O.C. 1.00 430-200-012 BELT BX83 COG V-BELT 85.9 P.L. BANDED 4.00 430-367-TM5 BX83 COG V-BELT 85.9 PL TOP MOUNT 1.00 North America s Leading Manufacturer & Wholesaler of Industrial Vacuum Equipment E.1.16 NVE 2015 Product Catalog Rev. 15-03