M-iLAN- Laser Scanner Many fields of application due to modular construction Integrated controller LAN connection Low current consumption Due to the modular construction system several Scanner models can be used on different ambient conditions: Standard Model Basic module for the use in dust-free environments at temperatures up to 4 C Model -S with Protective Window Basic module with for the use in dusty environments Model -WS with Protective Window and Cooling Basic module with and cooling element for the use in dusty environments at high temperatures Please specify the desired model when ordering! DB-MiLAN-_8-4-E D-886 Eching +49 () 89 / 7 - +49 () 89 / 7-99
Specifications MiLAN- M-iLAN- 6/4 / / 4/ 6/ 8/4 /6 6/ 4/ 6/ 8/4 / [mm] 6 4 6 8 6 4 6 8 Begin of range [mm] 8.. 6 6 84 6 84 Begin of range [mm] 4 4 6 4 End of range [mm] 4. 6 4 8 7 8 4 7 Resolution * [mm]......4.6...6.8. Resolution * [mm].8...4.7.9.4.9.8.4.64.7 Linearity. % of range Laser protection class M (P mw), R (P mw), B (P mw); depending on the requirements of the measuring task Sampling rate Hz; option. 7 Hz Specials Feeler gage, elapsed hour counter, serial number and sensor data readable Light source Laser; 68 nm (red visible), optionally 4 nm (blue visible) Ambient light, Lux Operating time Laser diode:, h (typical) Max. vibration g up to khz Perm. pressure (cooling) Max. operating pressure. bar Cooling medium compatible with aluminium and NBR Operating temperature C... +4 C Storage temperature - C... +7 C Humidity < 9% RH Protection class IP 64 supply - V, Pw = W Measuring surface white to black, matt to glossy * Measurement on matt white, diffusely reflecting surface Pin assignment: cable - connector M, 4 pole, D-coded, female: Control cable - connector M, 8 pole, A-coded, male: Pin Signal Comment Pin Signal Comment Tx+ Transmission data + - V Rx+ Received data + Input Tx- Transmission data - GND Incremental encoder A + B 4 Rx- Received data - 4 Input Shield Connected with connector housing Sync out 6 Sync in For synchronization of sensors 7 TxD RS diagnostic interface 8 --- reserved Shield Scope of Delivery Scanner head without cable and power supply (please order separately) Manual Options please state for ordering Option -S (with ) Option -WS (with and cooling element) Scanners synchronized Accessories not included in delivery Connection cable (different lengths and types) cable (different lengths and types) Protective window supply DB-MiLAN-_8-4-E D-886 Eching +49 () 89 / 7 - +49 () 89 / 7-99
Laser Scanner M-iLAN--6/4 with thread M on both sides. 4 6 88 6 8.6 begin 7 6. 96.7 4.7 49 4. 6.9 49 4.6.96 4. 6 Weight 9 g Order Number i7 Product Name M-iLAN--6/4 DB-MiLAN-_8-4-E D-886 Eching +49 () 89 / 7 - +49 () 89 / 7-99
Laser Scanner MiLAN--/ 6.4 68.8 89.8 4 4 7 Weight 7 g 68.4 with thread M on both sides.8. 6 begin 49 49 78 96 innerø=4; outerø=6 4 cooling unit 4 7.8 Weight 8 g Weight g i M-iLAN--/ Standard model () i6 M-iLAN--S-/ Standard model with () i M-iLAN--WS-/ Standard model with and cooling element () DB-MiLAN-_8-4-E D-886 Eching +49 () 89 / 7 - +49 () 89 / 7-99
Laser Scanner M-iLAN--/ with thread M on both sides. 4. 6 84 6 8 6 6 Weight g 6. 7 begin 49 49 inner Ø=4; outer Ø=6 4 9 cooling unit 8 4.9 Weight 8 g Weight g i M-iLAN--/ Standard model () i6 M-iLAN--S-/ Standard model with () i M-iLAN--WS-/ Standard model with and cooling element () DB-MiLAN-_8-4-E D-886 Eching +49 () 89 / 7 - +49 () 89 / 7-99
Laser Scanner M-iLAN--4/ with thread M on both sides 6 9 6 8 6 6 Weight 6 g 6. 4 begin 49 49 6 8 4 inner Ø=4; outer Ø=6 9 cooling unit 4.9 Weight 4 g Weight 8 g i4 M-iLAN--4/ Standard model () i64 M-iLAN--S-4/ Standard model with () i4 M-iLAN--WS-4/ Standard model with and cooling element () DB-MiLAN-_8-4-E D-886 Eching +49 () 89 / 7 - +49 () 89 / 7-99
Laser Scanner M-iLAN--6/ with thread M on both sides 6 9 6 6 Weight 6 g begin 6. 6 49 49 4 4 Inner Ø=4; outer Ø=6 9 cooling unit 8 Ø 4.4 4.9 Weight 4 g Weight 8 g i6 M-iLAN--6/ Standard model () i66 M-iLAN--S-6/ Standard model with () i6 M-iLAN--WS-6/ Standard model with and cooling element () DB-MiLAN-_8-4-E D-886 Eching +49 () 89 / 7 - +49 () 89 / 7-99
Laser Scanner M-iLAN--8/4. 4. with thread M on both sides 6 4 6 8 6 Weight 46 g 6. 6 begin 4 8 49 49 8 4 inner Ø=4; outer Ø=6 9 cooling unit 4.9 Weight g Weight 7 g i8 M-iLAN--8/4 Standard model () i68 M-iLAN--S-8/4 Standard model with () i8 M-iLAN--WS-8/4 Standard model with and cooling element () DB-MiLAN-_8-4-E D-886 Eching +49 () 89 / 7 - +49 () 89 / 7-99
Laser Scanner M-iLAN--/6 with thread M on both sides.7.7 6 7. 6 6 8 6 6. Control Weight 4 g.6 6. 84 begin 6 49 49 8 4 inner Ø=4; outer Ø=6 9 84.8 cooling unit. Weight 6 g Weight 89 g i M-iLAN--/6 Standard model () i6 M-iLAN--S-/6 Standard model with () i M-iLAN--WS-/6 Standard model with and cooling element () DB-MiLAN-_8-4-E D-886 Eching +49 () 89 / 7 - +49 () 89 / 7-99
Laser Scanner M-iLAN--6/ with thread M on both sides approx. mm deep 6. 48. 7 7 44 74.8 6 Weight 9 g 6. begin 6 49 49 7 79.8 9 inner Ø=4; outer Ø=6 7 7 44 44 cooling unit 6..9 Weight 9 g Weight 46 g i6 M-iLAN--6/ Standard model () i66 M-iLAN--S-6/ Standard model with () i6 M-iLAN--WS-6/ Standard model with and cooling element () DB-MiLAN-_8-4-E D-886 Eching +49 () 89 / 7 - +49 () 89 / 7-99
Laser Scanner M-iLAN- for large ranges a freely movable and twistable clamping flange 6 8 MB AMB AMB EMB M-iLAN-- 4/ 6/ 8/4 / [mm] 4 6 8 Begin of range [mm] 6 84 Begin of range [mm] 4 End of range [mm] 8 4 7 Weight [g] 4 6 7 9 Length a [mm] 9 9 Order number i4 i6 i8 i DB-MiLAN-_8-4-E D-886 Eching +49 () 89 / 7 - +49 () 89 / 7-99