Incremental encoders Solid shaft with clamping or synchro flange pulses per revolution programmable
|
|
- Imogene Walker
- 5 years ago
- Views:
Transcription
1 pulses per revolution programmable Features Size mm Precise optical sensing Output signal level programmable (TTL or HTL) Clamping or synchro flange Connection axial, radial or tangential Pulses per revolution , programmable High protection up to IP 67 High resistance to shock and vibrations EIL580P with clamping flange Technical data - electrical ratings Voltage supply Reverse polarity protection Yes Short-circuit proof Consumption w/o load Initializing time VDC Yes 70 ma Pulses per revolution Scan ratio 0 ms after power on % typical at 8 ppr Reference signal Zero pulse 90 or 180 Sensing method Optical Output frequency 00 khz (TTL) 160 khz (HTL) Output signals A+, B+, R+, A-, B-, R- Output stages TTL/RS22 HTL/push-pull Programmable parameters Output level TTL/HTL Pulse number Zero pulse width 90 /180 Zero pulse position Signal sequence Interference immunity DIN EN Emitted interference DIN EN Approval UL 508 / CSA 22.2 Technical data - mechanical design Size (flange) Shaft loading Protection DIN EN mm 0 N axial 80 N radial IP 65 (without shaft seal), IP 67 (with shaft seal) Operating speed 6000 rpm (+ C, IP 67) 100 rpm (+ C, IP 65) Starting torque 0.01 Nm (+ C, IP 65) 0.02 Nm (+ C, IP 67) Materials Housing: aluminium die-cast Flange: aluminium Solid shaft: stainless steel Operating temperature C Relative humidity 90 % non-condensing Resistance DIN EN Vibration 0 g, -00 Hz DIN EN Shock 00 g, 6 ms Connection Flange connector M12, 8-pin Flange connector M2, 12-pin Cable Weight approx. 00 g EIL580P - clamping flange Shaft type ø x mm, solid shaft with edge (clamping flange) EIL580P - synchro flange Shaft type ø6 x mm, solid shaft with flat edge (synchro flange) 1
2 pulses per revolution programmable Part number Clamping flange EIL580P-S C. F. 02. B Operating temperature B C Pulses programmable programmable (factory setting: 2) F Voltage supply / output stages VDC, TTL/RS22, 6 channels (Vout = 5 VDC) - Factory setting HTL/push pull 6 channel (Vout = Vin) - programmable by customer Connection R Cable radial, 1 m L Cable radial, 2 m F Flange connector M2, 12-pin, radial, male, ccw B Flange connector M12, 8-pin, radial, male, ccw T Cable axial, 1 m U Cable axial, 2 m D Flange connector M2, 12-pin, axial, male, ccw A Flange connector M12, 8-pin, axial, male, ccw P Cable tangential, 1 m * Q Cable tangential, 2 m * Protection 5 IP 65 7 IP 67 Specification solid shaft ø x mm, with edge C Flange Clamping flange, centering collar ø6 mm, M/M Printed in bold = standard items (up to the quantity of will be supplied within 5 working days). * only available in protection 5 = IP 65 (Factory setting: 2 ppr, Vout = 5 VDC TTL, signal sequence A leading B (CW), zero pulse 90 A&B high) Stock items EIL580P-SC.5FF.02.B EIL580P-SC.5RF.02.B Numerous stock items in single quantity will be supplied within 2 hours respectively one day ex works. 2
3 pulses per revolution programmable Part number Synchro flange EIL580P-S Y 06. F. 02. B Operating temperature B C Pulses programmable programmable (factory setting: 2) F Voltage supply / output stages VDC, TTL/RS22, 6 channels (Vout = 5 VDC) - Factory setting HTL/push pull 6 channel (Vout = Vin) - programmable by customer Connection R Cable radial, 1 m L Cable radial, 2 m F Flange connector M2, 12-pin, radial, male, ccw B Flange connector M12, 8-pin, radial, male, ccw T Cable axial, 1 m U Cable axial, 2 m D Flange connector M2, 12-pin, axial, male, ccw A Flange connector M12, 8-pin, axial, male, ccw P Cable tangential, 1 m * Q Cable tangential, 2 m * Protection 5 IP 65 7 IP 67 Specification solid shaft 06 ø6 x mm, with edge Y Flange Synchro flange, flute ø5 mm, M/M Printed in bold = standard items (up to the quantity of will be supplied within 5 working days). * only available in protection 5 = IP 65 (Factory setting: 2 ppr, Vout = 5 VDC TTL, signal sequence A leading B (CW), zero pulse 90 A&B high) Stock items EIL580P-SY06.5FF.02.B EIL580P-SY06.5RF.02.B Numerous stock items in single quantity will be supplied within 2 hours respectively one day ex works.
4 pulses per revolution programmable Accessories Connectors and cables 1278 Connection cable 2 m shielded with female connector M12, 8-pin, straight (ESG FH00G) 1292 Connection cable 5 m shielded with female connector M12, 8-pin, straight (ESG FH0500G) 129 Connection cable m shielded with female connector M12, 8-pin, straight (ESG FH00G) 961 Connection cable 2 m shielded with female connector M12, 8-pin, angled (ESW FH00G) 962 Connection cable 5 m shielded with female connector M12, 8-pin, angled (ESW FH0500G) Connection cable m shielded with female connector M12, 8-pin, angled (ESW FH00G) Connector M2, 12-pin Connection cable 1 m shielded with female connector M2, 12-pin Connection cable 2 m shielded with female connector M2, 12-pin 1100 Connection cable 5 m shielded with female connector M2, 12-pin 1101 Connection cable m shielded with female connector M2, 12-pin Connection cable connector M12 / connector D-SUB, 0.2 m Connection cable connector M12 / connector D-SUB, 1 m Connection cable connector M2 / connector D-SUB, 0.2 m (S2BG12/KSG9) Connection cable connector M2 / connector D-SUB, 1 m (S2BG12/KSG9) Mounting accessories for EIL580P - clamping flange 1659 Coupling CPS25 L=19 d1=0/d2= Coupling CPS25 L=19 d1=07/d2= 1659 Coupling CPS25 L=19 d1=08/d2= Coupling CPS25 L=19 d1=09/d2= Coupling CPS25 L=19 d1=/d2= Coupling CPS25 L=19 d1=/d2= Coupling CPS25 L=19 d1=/d2= Coupling CPS25 L=19 d1=/d2= Spring washer coupling D1=06 / D2= 111 Spring washer coupling D1= / D2= 118 Spring washer coupling D1= / D2= Spring washer coupling D1= / D2=1 Accessories Mounting accessories for EIL580P - clamping flange 111 Spring washer coupling D1= / D2= Bellows coupling aluminium/stainless steel D1=06 / D2= Double loops coupling D1= / D2= Mounting adaptor for encoders with clamping flange Set of eccentric fixings type A Tether arm Mounting accessories for EIL580P - synchro flange Coupling CPS25 L=19 d1=06/d2= Coupling CPS25 L=19 d1=06/d2= Coupling CPS25 L=19 d1=/d2= Coupling CPS25 L=19 d1=11/d2= Coupling CPS25 L=19 d1=12/d2= Spring washer coupling D1=06 / D2= Spring washer coupling D1=06 / D2= 119 Spring washer coupling D1=06 / D2= Bellows coupling aluminium/stainless steel D1=06 / D2= Mounting adaptor for encoders with synchro flange Set of eccentric fixings for mounting clamp (117667): x eccentric fixings, screws and nuts Set of eccentric fixings type A 812 Bearing flange for encoders with synchro flange (Z ) Programming accessories Handheld Programming Tool Z-PA-EI-H PC Programming Tool Z-PA-EI-P Matching measuring wheels available as accessories, see under measuring wheels (MR).
5 pulses per revolution programmable Output signals A+ A- B+ B- R+ R- A+ A- Zero pulse electrical 90 A&B high (Factory setting at clockwise rotation (CW) in view of the encoder flange) Zero pulse electrical 180 B low (at clockwise rotation (CW) in view of the encoder flange) Terminal assignment Flange connector M2, 12-pin / cable Pin Core color Assignment 1 pink B- 2 blue R+ red R- 5 green A+ 6 yellow A- 7 R-Teach 1) 8 grey B+ 9 white GND brown UB Screen: Connected to housing Cable data: PUR, [x2x0,1 mm 2 ], bending radius >5,8 mm, outer diameter 6.1 mm ) The R-Teach input is used to set the reference pulse (zero pulse) on the current shaft position. R-Teach = UB 0 ms B+ B- R+ R- Trigger level Outputs Output level High Output level Low Load Outputs Output level High Output level Low Load TTL/RS V 0.5 V ma HTL/Push-pull UB - V 1.5 V ma Flange connector M12, 8-pin Pin Assignment 1 GND 2 UB A+ A- 5 B+ 6 B- 7 R+ 8 R
6 pulses per revolution programmable Dimensions Clamping flange, flange connector M12, radial 8 ø8± M12x1 øg7 ø6h8 ø5±0.05 Clamping flange, flange connector M2, radial 8 56 øg7 ø6h8 ø5±0.05 ø8± M2x1 Clamping flange, cable radial ø8±0.2 ~ øg7 ø6h8 ø5±0.05 6
7 pulses per revolution programmable Dimensions Clamping flange, flange connector M12, axial ø8±0.2 M12x1 øg7 ø6h8 ø5± Clamping flange, flange connector M2, axial ø8±0.2 M2x1 øg7 ø6h8 ø5± Clamping flange, cable axial ~2 8 ø8±0.2 øg7 ø6h8 ø5±
8 pulses per revolution programmable Dimensions Clamping flange, cable tangential ø8±0.2 5 øg9 ø6h8 ø5±0.05 Synchro flange, flange connector M12, radial 51. ø5±0.05 ø2±0.2 M12x Synchro flange, flange connector M2, radial ø2± M2x1 ø5±0.05 8
9 pulses per revolution programmable Dimensions Synchro flange, cable radial ~5 ø5±0.05 ø2± Synchro flange, flange connector M12, axial 21.9 ø2±0.2 M12x1 ø5± Synchro flange, flange connector M2, axial ø2±0.2 M2x1 26. ø5±
10 pulses per revolution programmable Dimensions Synchro flange, cable axial ~2 ø2±0.2 ø5±0.05 Synchro flange, cable tangential.5 ø2± ø5-0.05
Incremental encoders Solid shaft with square flange pulses per revolution
Incrementl encoders Solid shft with squre flnge EIL580 - squre flnge - OptoPulse Fetures Size mm Precise opticl sensing Output signl level TTL or HTL Squre flnge 2.5 (63.5 mm) Connection xil, rdil or tngentil
More informationSERIES PR90H PROGRAMMABLE INCREMENTAL HOLLOW SHAFT ENCODER FOR INDUSTRIAL APPLICATIONS REFERENCE PR90H - C C - C. External diameter 58 mm
PROGRAMMABLE INCREMENTAL HOLLOW SHAFT ENCODER FOR INDUSTRIAL APPLICATIONS Programmable incremental optical encoder from 1 to 65.536 pulses per rotation Programmable via USB, without an additional programming
More informationIncremental encoders Insulated through hollow shaft ø inch pulses per revolution programmable (interpolated system)
Features HS35P with insulate hollow shaft Robust inustrial encoer up to IP 67 protection Highly versatile fully programmable encoer Interchangeable bore size(s) using metal inserts Insulating sleeve to
More informationOnline data sheet. DBS60E-S4EP05000 DBS60 Core INCREMENTAL ENCODERS
Online data sheet DBS60ES4EP05000 DBS60 Core DBS60ES4EP05000 DBS60 Core A B C D E F Ordering information Type Part no. DBS60ES4EP05000 1071649 Other models and accessories www.sick.com/dbs60_core Illustration
More informationOnline data sheet DFS60B-S4EL00800 DFS60 INCREMENTAL ENCODERS
Online data sheet DFS60B-S4EL00800 DFS60 B C D E F Illustration may differ Detailed technical data Performance Ordering information Type Part no. DFS60B-S4EL00800 1053600 Other models and accessories www.sick.com/dfs60
More informationSERIE 59S. Rear clamp. Frontal clamp INCREMENTAL HOLLOW SHAFT ENCODER FOR INDUSTRIAL APPLICATIONS SIN/COS
INCREMENTAL HOLLOW SHAFT ENCODER FOR INDUSTRIAL APPLICATIONS Resolution up to 2.048 pulses per turn Shaft fixing through front or rear clamp External diameter 58 mm Hollow shaft Ø 10, 12 or 14 mm Protection
More informationOnline data sheet DFS60B-S4CA08192 DFS60 INCREMENTAL ENCODERS
Online data sheet DFS60B-S4C08192 DFS60 B C D E F Illustration may differ Detailed technical data Performance Ordering information Type Part no. DFS60B-S4C08192 1038099 Other models and accessories www.sick.com/dfs60
More informationØ 68 mm to ø 115 mm. Material: Weight: Shaft Loads: Enclosure Rating: Connection Options. Cable: Cable Glands:
Electrical Specifications Code: Incremental Resolution: Up to 10,000 ppr (pulses per revolution) Supply Voltage: ** 4.5 Vdc min. to 30 Vdc max. (45 ma max. - no load) Low: 500 mv max. at 10 ma Voltage:
More informationØ 68 mm to ø 115 mm. Material: Weight: Bearing Life: Shaft Loads: Operating Temp.: Storage Temp.: Shock: Vibration: Bump: Humidity: Enclosure Rating:
, EN 60079 Electrical Specifications Code: Incremental Resolution: Up to 10,000 ppr (pulses per revolution) Supply Voltage: ** 4.5 Vdc min. to 30 Vdc max. (45 ma max. - no load) Low: 500 mv max. at 10
More informationGeneral Purpose Incremental Encoder
Model Number Features Up to 5000 ppr Industrial standard housing Ø58 mm Servo or clamping flange 10 V... 30 V with short-circuit proof push-pull output Description Compatibility says it all for this incremental
More informationMaterial: Weight: Shaft Loads: Enclosure Rating: Cable: Cable Glands:
Oil & Gas / Heavy Industry Type 2REX-A EN 60079 Electrical Specifications Code: Incremental Resolution: 1 to 10,000 ppr (pulses per revolution) Supply Voltage: ** 4.5 Vdc min. to 30 Vdc max. (45 ma max.
More informationOnline data sheet DFS60B-S4PC10000 DFS60 INCREMENTAL ENCODERS
Online data sheet DFS60-S4PC10000 DFS60 DFS60-S4PC10000 DFS60 C D E F H I J K L M N O P Q R S T Ordering information Type Part no. DFS60-S4PC10000 1036721 Other models and accessories www.sick.com/dfs60
More informationType 2REX-A. Oil & Gas / Heavy Industry
Oil & Gas / Heavy Industry Type 2REX-A EN 60079 Electrical Specifications Code: Incremental Resolution: 1 to 10,000 ppr (pulses per revolution) Supply Voltage: ** 4.5 Vdc min. to 30 Vdc max. (45 ma max.
More informationLength measurement system LMSLA12
Length measurement system LMSLA12 www.wachendorff-automation.com/lmsla12 Wachendorff Automation... systems and encoders Complete systems Industrial rugged encoders to suit your application Standard range
More informationRI360P0-QR24M0- INCRX2-H1181 Contactless Encoder Incremental
RI360P0-QR24M0- INCRX2-H1181 Contactless Encoder Incremental Features Compact, rugged housing Many mounting possibilities Status displayed via LED Immune to electromagnetic interference 1024 pulses per
More informationContactless Encoder with Stainless Steel Housing Incremental: ppr RI360P0-EQR24M0- INCRX2-H1181
Compact, rugged housing Active face, plastic PA12-GF30 Housing, stainless steel V4A (1.4404) Status displayed via LED Immune to electromagnetic interference 1024 pulses per revolution (default) 360, 512,
More informationRotative measurement Incremental rotary encoder RI-10S10C-2B500-H1181
Clamping flange, Ø 58 mm Solid shaft, Ø 10mm x 20mm Optical measuring principle Shaft material, stainless steel Protection class IP67 on the shaft side -40 +85 C Max. 6000 rev/min (continuous operation
More information2: A, B 3: A, B, Z 4: A, A _, B, B _ 6: A, A _, B, B _, Z, Z _
Diameter mm Shaft Type/Hollow Type/Built-In Type Incremental Rotary Encoder Features Diameter mm flange type Suitable for measuring angle, position, revolution, speed, acceleration and distance Power supply:
More informationSine encoders Insulated through hollow shaft ø inch sinewave cycles per turn
Features Rugge esign up to IP 67 protection Shock resistant up to 200 g s Insulating insert to prevent high shaft currents from amaging bearings Wie range voltage supply 4.75...30 VDC Precision 60 arc-secons
More informationRotative measurement Incremental rotary encoder Ri-10S10C-2B5000-H1181
Clamping flange, Ø 58 mm Solid shaft, Ø 10mm x 20mm Optical measuring principle Shaft material, stainless steel Protection class IP67 on the shaft side -40 +85 C Max. 6000 rev/min (continuous operation
More informationRotative measurement Incremental rotary encoder Ri-10S10C-2B1000-H1181
Clamping flange, Ø 58 mm Solid shaft, Ø 10 mm x 20 mm Optical measuring principle Shaft material, stainless steel Protection class IP67 on the shaft side -40 +85 C Max. 6000 rev/min (continuous operation
More informationAccessories Encoders COUNTERS CONTROLLERS ENCODERS. Features. Cable-operated mechanism
5125 Cable-operated mechanism Cable-operated mechanisms transform linear movements - following pull-out and draw-in of a rope - into rotations. Depending on the requirements, these rotations can be used
More informationProduct Overview. Rotary Encoders for Potentially Explosive Atmospheres (ATEX)
Product Overview Rotary Encoders for Potentially Explosive Atmospheres (ATEX) December 2013 Rotary encoders for use in potentially explosive areas Introduction There are many types of applications in industry
More informationINTELLIGENT FLANGE STRÖTER. Magnetic pulse generator
INTELLIGENT FLANGE STRÖTER agnetic pulse generator Incremental magnetic pulse generator addons to drive systems is now possible in an easy and economical way both in new and existing installations. The
More informationFor air dampers and control valves of oil or gas burners
7 813 Actuators For air dampers and control valves of oil or gas burners SQM33... Electromotoric actuators Torques: - SQM33.4 up to 1.2 Nm nominal output torque - SQM33.5 up to 3 Nm nominal output torque
More informationFixed Displacement Bent Axis Axial Piston Motors TMB 700
HYDRAULIC COMPONENTS HYDROSTATIC TRANSMISSIONS GEARBOXES - ACCESSORIES Certified Company ISO 9001:2015-14001:2015 ISO 9001:2015 Certificate N 12-Q-0200545-TIC ISO 14001:2015 Certificate N 12-E-0200545-TIC
More informationContents. Part no.: MLC500T Safety light curtain transmitter
Part no.: 68000315 MLC500T30-1500 Safety light curtain transmitter Figure can vary Contents Technical data Suitable receivers Dimensioned drawings Electrical connection Circuit diagrams Operation and display
More informationEncoder WDG 58V.
Encoder WDG 58V www.wachendorffautomation.com/wdg58v Wachendorff Automation... systems and encoders Complete systems Industrial rugged encoders to suit your application Standard range and customer versions
More informationSeries 7000 Torque Sensor for PTO-shafts
Properties PTO (Power Take-Off) shaft with integrated torque and angle measurement Non-contact measurement system, high robustness Special for PTO shafts 1 ¾ und 1 3/8 Plug & Play solution, no additional
More informationTemposonics. G-Series Analog Redundant. Magnetostrictive Position Sensors. Redundancy for enhanced safety
Temposonics Magnetostrictive Position Sensors m SENSORS G-Series Redundant Temposonics GT2 and GT3 Measuring length 25-1500 mm Redundancy for enhanced safety Up to 3 totally separated, independent measuring
More informationSeries 7000 Torque Sensor for PTO-shafts
Properties PTO (Power Take-Off) shaft with integrated torque and angle measurement Non-contact measurement system, high robustness Special for PTO shafts 1 ¾ und 1 3/8 Plug & Play solution, no additional
More informationVert-X 31E - 24V / 4-20mA. Applications Concrete pump Access control system Fork lift
Sensor principle MH-C MH-C2 Electrical data Measuring range 0... 360 0... 360 Indep. linearity (typ.) % of meas. range ±0.3 ±0.3 Max. hysteresis 0.1 0.1 Resolution bit 12 14 Max. repeatability 0.1 0.1
More informationfluid technology temperature sensors 1600 intelligent temperature sensor membrane keyboard, USB opto interface
fluid technology temperature sensors 1600 1 dimensions Ø38 x 118mm temperature operating range -40 to +300 C temperature measuring range from -40 to +300 C M12 socket for PT100 resistance thermometer analog
More informationN4 Series Magnetic Encoder Module High Resolution Module
Features and Benefits Two channel quadrature output Industry standard 7272 line driver output RS-422 compatible output 5V output standard; 24V output available Options up to 5000 pulses per channel per
More informationSteering column and sensor
Steering column and sensor Type LAB Series 1 x Nominal voltage 12 to 48 volt Output signal digital, analog and direction (option) HE 11874 / 09.2017 2 LAB HE 11874 / 09.2017 Page Content 4 4 5 6 7 7 8
More informationContents. Part no.: MLC510R Safety light curtain receiver
Part no.: 68001315 MLC510R30-1500 Safety light curtain receiver Figure can vary Contents Technical data Suitable transmitters Dimensioned drawings Electrical connection Circuit diagrams Operation and display
More informationProduct Information ECN 425 EQN 437. Absolute Rotary Encoders with Hollow Shaft and Expanding Ring Coupling for Safety-Related Applications
Product Information ECN 425 EQN 437 Absolute Rotary Encoders with Hollow Shaft and Expanding Ring Coupling for Safety-Related Applications 4/2014 ECN 425, EQN 437 Rotary encoders for absolute position
More informationFlow measurement FlexFlow PF20H Hygienic flow sensor
Product highlights Parallel measurement of flow and temperature Flow measurement independent of the mounting position Large measuring range up to 400 cm/s Measurement at high media temperatures up to 125
More informationTL-W. Standard Flat Sensors in Many Different Variations. Flat Inductive Proximity Sensor. Ordering Information
Flat Inductive Standard Flat s in Many Different Variations Only 6 mm thick yet provides a sensing distance of mm (MC1). Aluminum die-cast models also available. Be sure to read Safety Precautions on page
More informationStepper motors EMMS-ST
q/w Worldwide: Superb: Easy: Festo core product range Covers 80% of your automation tasks Always in stock Festo quality at an attractive price Reduces procurement and storing complexity qgenerally ready
More informationJUMO MIDAS S05 Pressure transmitter Type
Data Sheet 40.00 Page /8 JUMO MIDAS S05 Pressure transmitter Type 4000 Brief description The JUMO MIDAS S05 pressure transmitter is available with both relative pressure and absolute pressure measurement
More informationRed/green-LED for switching state indication (dyn.) Yellow LED for dirt accumulation indication
FLB Series FLB-F2-...-HS (High Speed) - High switching frequency (10kHz) - Integrated electronics - High sensitivity (adjustable via 5-step switch) - Pulse length adjustable via 5-step switch - Dynamic
More informationRotary Sensor potentiometric Heavy-duty. Series IPX-7900
Rotary Sensor potentiometric Heavy-duty Series IPX-7900 Special features exceptionally durable design for extreme environmental conditions absolute potentiometric measuring system angle ranges 120, 200
More informationInstruction Manual EDS-75-S EDS-100-S/F EDS-160-S/F EDS-200-S/F EDS-220-Z EDS-250-S/F
Instruction Manual -75-S -100-S/F -160-S/F -200-S/F -220-Z -250-S/F -260-Z -300-S/F/Z -370-Z -400-S/F/Z -500-S -630-S/F Long-Stroke sensors, Series Contents 1. Safety... 5 1.1 Symbols Used... 5 1.2 Warnings...
More informationOptical Kit Encoder Page 1 of 7. Description. Features
Description Page 1 of 7 The E3 is a high resolution rotary encoder with a rugged glass-filled polymer enclosure, which utilizes either a 5-pin locking or standard connector. This optical incremental encoder
More informationSTT280 SEALED TILT SENSOR
STT280 SEALED TILT SENSOR PERFORMANCE ELECTRICAL Measurement range Supply voltage Vdc Over voltage protection Vdc Maximum supply current ma Reverse polarity protection Short circuit protection Output to
More informationRotative measurement Absolute rotary encoder / Multiturn RM-29S10C-9A28B-R3M12
Clamping flange, Ø 58 mm Solid shaft, Ø 10mm x 20mm Optical measuring principle Shaft material, stainless steel Protection class IP67 on the shaft side -40 +80 C max. 3000 rev/min PROFIBUS Removable bus
More informationIncremental Optical Encoders, RCI range
Industrial Sensors Incremental Optical Encoders, RCI range RCI 40-S RCI 40-HS PRECILEC optical incremental encoders are designed for accurately measuring speed and position of rotating shafts in industrial
More informationStepper motors EMMS-ST
q/w Worldwide: Superb: Easy: Festo core product range Covers 80% of your automation tasks Always in stock Festo quality at an attractive price Reduces procurement and storing complexity qready for dispatch
More informationACME SCREW LINEAR ACTUATOR. OVERALL DIMENSIONS La =Lc + Stroke Lc T Capacitor
ACME SCREW LINEAR ACTUATOR ATL 10 AC motor Stroke OVERALL DIMENSIONS La =Lc + Stroke Lc T Capacitor Rear bracket SP Pin Standard head with threaded hollow bore 80 BA depth 17 Stroke end reed switches FCM
More informationDATAFLEX 42/1000 Torque Measuring Shaft Operating/Assembly instructions DATAFLEX
DATAFLEX 4/1000 1 of 1 DATAFLEX Torque measuring shaft type 4/1000 Drawn: 017-01-0 Shg/Koe Replaced for: dated 015-04-13 Verified: 017-01-0 Shg Replaced by: DATAFLEX 4/1000 of 1 DATAFLEX is a maintenance-free
More informationTransmotec. Transmotec. Ø mm W
Worm gear dc motors gear dc motors Worm Ø 43-123 mm 13-420W sell a broad range of geared DC motors in standard and customized configurations. ur motors are often available with gear heads, encoders and
More informationOptical Kit Encoder Page 1 of 8. Description. Mechanical Drawing. Features
Description Page 1 of 8 The E3 is a high resolution rotary encoder with a rugged glass-filled polymer enclosure, which utilizes either a 5-pin locking or standard connector. This optical incremental encoder
More informationAcceleration sensors (ICP technology) VBS 50 overview Configurations
VBS050_S25AT VBS 50 overview Configurations Vibration sensor VBS 50 VBS050_AR 0.SH.VBS.050ARXX VBS050_TRIAX_R Screw mounted, M8 thread Vibration sensor VBS 50 EPOXY 0.SH.VBS.050ATXX VBS050_TRIAX_B Screw
More informationElectric Mini Slides MSC-EL
Electric Mini Slides MSC-EL R10EN 2604 (11.08) The Drive & Control Company Electric Mini Slides, MSC-EL R10EN 2604 (11.08) Mini Slides, MSC-EL Product Description 4 Selection Guide 6 Maximum thrust 6
More informationECT Applications. Features
Industrial Pressure Transmitter Swiss based Trafag is a leading international supplier of high quality sensors and monitoring instruments for measurement of pressure and temperature. The economical pressure
More informationCPLab / CP Factory. Application module magazine. Data sheets
CPLab / CP Factory Application module magazine Data sheets Data sheet: Push-in fitting QSM-M5-4 #153304 Size Mini Nominal size 2.2 mm Type of seal on screw-in stud Sealing ring Container size 10 Design
More informationPPT 802, Proximity Probe Transducer System
PPT 802, Proximity Probe Transducer System PPH 080 : Proximity Probe Head PEC 036 : Probe Extension Cable PRD 020 : Proximity Probe Driver Feature Non-contacting measurement system based on eddy current
More informationCTE8000 / CTU8000 Series
CTE8000 / CTU8000 Series FEATURES 250 mbar to 100 bar, 5 to 1500 psi gage1 or absolute10 pressure 0...5 V, 0...10 V or 4...20 ma output Field interchangeable For many industrial gases and liquids EMC according
More informationCompact cylinders series NYD Double acting with magnetic piston, ISO M5 to G1/8 Piston Ø 20 to 100 mm
Compact cylinders series NYD Double acting with magnetic piston, ISO 21287 M5 to G1/8 Piston Ø 20 to 100 mm 200, 210 220 600, 610 620 Order code NYD-032-125-210 High force cylinder series NYDK and multiple
More informationLexium integrated drives
Description ILp for CANopen, PROFIBUS DP, RS ILE with brushless DC motor Description ILE comprise control electronics with a fieldbus interface for CANopen DS, PROFIBUS DP or RS and a brushless DC motor.
More informationDCmind: DC direct-drive brush motors
DCmind: DC direct-drive brush motors 6 mm - W Silent motor V and V built in EMC filter class B Excellent efficiency ong life IP6 In accordance with U - CE - ROHS regulations Part numbers V V 8 V 9 V Type
More informationVP23 3-way proportional pressure control valve Directly-controlled seat valve with µp-driven pressure control G 1/4... G 3/4
-way proportional pressure control valve Directly-controlled seat valve with µp-driven pressure control G /... G / All-digital control electronics Variable pressure control Optional: serial interface with
More informationTransmotec PLANETARY GEAR DC MOTORS PLANETARY GEAR MOTORS. Transmotec. 43 mm to Ø123 mm 12 W to 421 W.
Transmotec PLANETARY GEAR MTRS PLANETARY GEAR DC MTRS mm to Ø123 mm 12 W to 421 W Transmotec www.transmotec.com Phone: +46 8 792 35 30 Fax: +46 8 792 35 20 e-mail: inquiry@transmotec.com Page 1 Rev. 2018
More informationPneumatic cylinders, piston-ø mm Double acting with magnetic piston DIN ISO 15552
Pneumatic cylinders, piston-ø 32 100 mm Double acting with magnetic piston DIN ISO 15552 Technical data for series SL 050 450 Order code SL-032-0250-050 Series Piston-Ø Stroke length (mm) Type of cylinder
More informationELA Electromechanical Linear Actuators
ELA Electromechanical Linear Actuators D Electromechanical Linear Actuators ELA Electromechanical Linear Actuators (ELA) consist of a completely enclosed aluminium housing with worm gearing and axial bearing
More informationMore Precision. mainsensor Magneto-inductive displacement sensor
More Precision mainsensor Magneto-inductive displacement sensor mainsensor Magneto-inductive sensors for non-contact linear displacement measurement Measuring principle mainsensor is based on an innovative
More informationENS22 ANGULAR SENSOR DIGITAL (SSI SPI) ENS22B ENS22F ENS22K
ENS22 The sensors of the ENS22 series use the magnetic technology to measure a rotation angle. The housing diameter is 22 mm. ANGULAR SENSOR DIGITAL (SSI SPI) The axis pull a magnet. The position of the
More informationHF Series Incremental Magnetic Encoder Decade Count High Resolution Kit
HF Series Incremental ic Encoder Features and Benefits ic technology offers robust performance. 100% Non-contacting design (no bearings or bushing) provides an extremely long life expectancy and is tolerant
More informationLexium integrated drives
Description ILp for DeviceNet, EtherCAT, Modbus TCP, ILE with brushless DC motor Description ILE comprise control electronics with a fieldbus interface for DeviceNet, EtherCAT, Modbus TCP or and a brushless
More informationType A-10 General Purpose Pressure Transmitter
General Purpose TRONIC > General Purpose > A-10 Type A-10 General Purpose Pressure Transmitter Standard Features Signal output: 4-20 ma 2-wire or 0-10 V 3-wire Supply voltage: 8-30 DC (14-30 VDC) Process
More informationEPI Applications. Features
EPI 887 Industrial Pressure Transmitter Swiss based Trafag is a leading international supplier of high quality sensors and monitoring instruments for measurement of pressure and temperature. The industrial
More informationProduct Information. ROC 2000 ROC 7000 Angle Encoders with Integral Bearing for Separate Shaft Coupling
Product Information ROC 2000 ROC 7000 Angle Encoders with Integral Bearing for Separate Shaft Coupling November 2015 ROC 2000 series For separate shaft coupling System accuracy ±5 A = Bearing À = Position
More informationElectronic Sensors Solid State, Reed and Proximity Sensors Feedback Packages
Electronic Solid State, Reed and Proximity Feedback Packages & Feedback Contents Hall Effect... 2 Reed Switches... 3 Cordsets... 4 Proximity... 5 Feedback Packages... 8 1 Sensor Specifications Solid State
More informationHall sensors. Overview Page 28 Functional principle and installation Page 29 Cylindrical designs Page 31. Hall sensors.
Overview Page 28 Functional principle and installation Page 29 Cylindrical designs Page 31 27 Kurzübersicht Hallsensoren Overview product family MHRM 12 MHRM 12 IHRM 12 MHRM 18 MTRM 16 dimension 12 mm
More informationVP23, 3-way proportional pressure control valves Seat valve with μp-driven pressure control
VP, -way proportional pressure control valves > > Port size: G/... G/ > > All-digital control electronics > > Variable pressure control > > Optional: serial interface with VP-Tool Software > > Optional
More informationPRM7-04. Functional Description HA /2012. Proportional Directional Control Valves. Replaces HA /2009
Proportional Directional Control Valves PRM7-6/ Size D () bar (6 PSI) L/min (. GPM ) Replaces /9 Digital control Compact design Operated by proportional solenoids High sensitivity and slight hysteresis
More informationFL7M-A Series. Aluminum-chip Immunity DC 2-wire Type Cylindrical Proximity Sensors. Specifications. click FEATURES ORDER GUIDE
6 FL7M-A Series FEATURES Workpieces Reliably Sensed Even if Aluminum or Cast Iron Chips Accumulate on the Sensing Head. This DC 2-wire type proximity sensor can be directly connected to programmable controllers
More informationM2-iLAN-2 Laser Scanner
M-iLAN- Laser Scanner Many fields of application due to modular construction Integrated controller LAN connection Low current consumption Due to the modular construction system several Scanner models can
More informationPlease read Safety Considerations in operation manual before using. [Ai-M-42 Series] [Ai-M-56 Series] [Ai-M-60 Series] 67.5mm mm. 73.
i- Series 2-Phase Closed-Loop Stepper otor Features inimal heat generating, high torque motor (control voltage 55V) Higher cost-efficiency compared to conventional servo motors vailable in motor frame
More informationElectronic Temperature Sensor ETS 300
Description: The ETS 300 is a compact electronic temperature sensor with digital display. Two different models are available for optimum adaptation to particular applications. The ETS 300 with built-in
More informationEnergy-saving motors (ESM)
Energy-saving motors (ESM) Technology Accessories EC-SYSTEMS ESM General information K series Q-motor EC axial EC axial fans A series fans Energy-saving motors (ESM) 316 Air performance curves 3 Energy-saving
More informationPRM7-06. Functional Description HA /2006. Proportional Directional Control Valves. Replaces HA /2002
Proportional Directional Control Valves PRM7-6 HA 59 /6 Size D (6)...6 PSI ( bar)...6 GPM ( L/min) Replaces HA 57 / Digital control Compact design Operated by proportional solenoids High sensitivity and
More informationPRM7-06. Functional Description HA /2014. Proportional Directional Control Valves. Replaces HA /2013
Proportional Directional Control Valves PRM7-6 / Size 6 (D ) bar (76 PSI) L/min (.6 GPM) Replaces HA 7 / Digital control Compact design Operated by proportional solenoids High sensitivity and slight hysteresis
More informationREMOTE SENSOR SERIES. Description
Description Operation mode and max sensing range: : Dependent on amplifier (up to 7m) proximity: Dependent on amplifier (up to 5m) Optional sensor monitor Wide variety of housings High tolerance to hostile
More informationTemperature switch. Switching output 2 transistors PNP Logger Ring buffer: 3518 data points Sampling time: s, Off (0)
Temperature switch Swiss based Trafag is a leading international supplier of high quality sensors and monitoring instruments for measurement of pressure and temperature. Applications Machine tools Hydraulic
More informationMotor/Drive Configuration
ZX900 Electrical Specifications Input Power Output Power Electrical specifications for the ZX900 series drive's input and output power are provided in this section. Voltage (Nominal) Voltage (Range) Frequency
More informationTechnical Data Measuring principle Thin-film-on-steel Media temperature -40 C C
Electronic Pressure Switch Swiss based Trafag is a leading international supplier of high quality sensors and monitoring instruments for measurement of pressure and temperature. The Electronic Pressure
More informationDATAFLEX 110/... Torque Measuring Shaft Operating/Assembly instructions DATAFLEX. Torque measuring shaft type 110/
DATAFLEX 0/... of 22 DATAFLEX Torque measuring shaft type 0/ DATAFLEX 0/... 2 of 22 DATAFLEX is a maintenance-free torque measuring shaft with integrated speed measurement. Combined with the steel lamina
More information4,5 / 27 2,0 / steel, black coated. clockwise, viewed from the front face. ø15,9 ø17-0,052 ø6-0,05. ø3,5 8,1 ±0,3 2, T
DC-Micromotors Precious Metal Commutation mnm For combination with (overview on page 4-5) Gearheads: 5, 6, 6/7 Encoders: IE 6... 5 Series 3 4 77... SR Nominal voltage Terminal resistance Output power Efficiency
More informationFor air / gas dampers and control valves of oil or gas burners
7 803 Actuators For air / gas dampers and control valves of oil or gas burners SQN13.xxxB9 SQN14.xxxB9 Electromotoric actuators Torque: Up to 1 Nm rated output torque Direction of rotation: - SQN13 Counterclockwise
More informationJUMO MIDAS S07 MA. OEM Pressure Transmitter - Maritime Approved. Applications. Brief description. Special features.
Page /0 JUMO MIDAS S07 MA OEM Pressure Transmitter - Maritime Approved Applications In the shipping and offshore sector: HVAC (heating, ventilating, and air conditioning) Refrigeration engineering Compressors
More informationApplication. Multi-Headed Linear Positioning Enclosed Stage
Multi-Headed Linear Positioning Enclosed Stage PBA Systems introduces OCTO, a multi-headed linear positioning enclosed stage ideal for applications that require independent control of multiple axes travelling
More informationSMH80S AAK-3AKH SMH80S ABK-3AKH
FEATURES DESCRIPTION 120 VAC 80mm Frame Size Power Ratings from 750-1000 Watts Rated Torque of 338-450 oz-in Maximum Speed of 5000 RPM Brake Option Available 2500 PPR Incremental Encoder IP65 Protection
More informationOEM Pressure Transmitters
OEM Pressure Transmitters Type ECO-1 Applications Hydraulics and pneumatics Mechanical engineering General industrial applications Special Features Pressure ranges from 0-15psi to 0...15,000psi 4-20 ma
More informationSMH60S-0040 Servo Motor
FEATURES 120-220 VAC 400 W Power Rating Rated Torque of 1.27 Nm Maximum Speed of 6200 RPM 2500 PPR Incremental Encoder IP65 for Body, IP54 Shaft Seal 60mm Frame Size CE Certified DESCRIPTION The SMH60S
More informationBTE2000 / PTE2000 Series Precision stainless steel pressure transmitters
FEATURES...5 to...5 bar,...5 to...5 psi gage 1 For corrosive media in harsh environments 1...6 or... ma output Field interchangeable All welded stainless steel diaphragm construction MEDIA COMPATIBILITY
More informationEPN/EPNCR Applications. Features
EPN/EPNCR 898 Engine Pressure Transmitter Swiss based Trafag is a leading international supplier of high quality sensors and monitoring instruments for measurement of pressure and temperature. The EPN
More informationTorque measuring. Types and operating description 310
308 Torque measuring technology Torque measuring shafts Types and operating description 310 Type 16/10, 16/30, 16/50 312 Type 32/100, 32/300, 32/500 314 Type 42/1000 316 Type 70/3000, 70/5000 318 Type
More informationCustomizations include: Customized harness. Shaft configuration. Winding configuration. And more... Ø mm W. TRANSMOTEC
Planetary gear dc motors gear dc motors Planetary Ø - 123 mm 12-421W Transmotec sell a broad range of geared DC motors in standard and customized configurations. ur motors are often available with gear
More information