6' 8" and 6' 10" Size Tables Scale 1/8" = 1' 0" All doors and sidelights are glazed with tempered glass. For windows and patio doors with HurricaneShield impact-resistant glass, see product instructions or refer to local building code requirements. Left-hand single doors shown, right-hand and fixed also available. Pella 2007 Architectural Design Manual Division 08 Openings Windows and Doors www.pellaadm.com 9-11
ARCHITECT S ERIES 7' 2" and 8' Size Tables Scale 1/8" = 1' 0" All doors and sidelights are glazed with tempered glass. Left-hand single doors shown, right-hand and fixed also available. 9-12 Pella 2007 Architectural Design Manual Division 08 Openings Windows and Doors www.pellaadm.com
Transom Size Tables Scale 1/8" = 1' 0" Go to www.pellaadm.com for complete illustrations and downloadable CAD details Traditional grille patterns shown. See Grille Types page for additional patterns and profiles. T Tempered glass is standard. Contact your local Pella sales representative for new transom designs available February 2007. Special Size Frame Dimensions 1 Door Type Frame Width Frame Minimum Maximum Minimum 2 Maximum Single Door 24" 48" 48" 108" Double Door 48" 96" 48" 108" Transoms 25-1/4" 75-3/4" 17" 25" Impact-Resistant Glazing Door Type Frame Width Frame Minimum Maximum Minimum 2 Maximum Single Door 24" 37-7/8" 76-3/8" 95-1/2" Double Door 48" 75" 73-3/8" 95-1/2" Transoms (1) Available within size range shown. (2) Three-point locks are available on units greater than 76-3/8". Keep frame dimensions to the nearest 1/8" increment. Pella 2007 Architectural Design Manual Division 08 Openings Windows and Doors www.pellaadm.com 9-13
ARCHITECT S ERIES Grille Types Integral Light Technology and Removable Interior Scale 3" = 1' 0" Grille Profiles Integral Light Technology with Clad Exterior 1 (1) Available in Pine, Mahogany, Alder or Douglas Fir to match complete unit. Foam spacer not available in impact-resistant glazing units. Integral Light Technology with Wood Exterior 2 (2) Available in Pine or Mahogany to match complete unit. Removable Interior Pine Bars 9-14 Pella 2007 Architectural Design Manual Division 08 Openings Windows and Doors www.pellaadm.com
Grille Types Integral Light Technology and Removable Interior Typical Grille Patterns For traditional pattern, see size tables. Prairie Lite Patterns All sidelights and transoms will have 9 lights. Standard corner lite dimension for Prairie patterns = 3-1/2" VG. ILT 9-Lite available in all standard and special sizes. 14-Lite available in units > 2' 1-1/2" width. Removable Grilles 9-Lite available in units < 7' 1-3/4" height. 12-Lite available in units > 6' 11-1/2" height. Other Available Patterns Top Row Standard visible glass to separator bar = 14" or half of total visible glass height, whichever is smaller. Cross Standard visible glass to separator bar = one-quarter of total visible glass height. New England Standard visible glass to separator bar = half of total visible glass height. VG = Visible Glass Lite dimensions noted can vary. Custom configurations are available; for details contact your local Pella sales representative. Pella 2007 Architectural Design Manual Division 08 Openings Windows and Doors www.pellaadm.com 9-15
ARCHITECT S ERIES Custom Shapes Pella Architect Series Out-Swing French doors are available in custom shapes shown below, and additional shapes per drawing. For specifications, size limitations, and details on these units, contact your local Pella sales representative. Shape 4Z Shape CZ Shape 12 Shape 03 Shape 3Z Shape 2Z Shape AZ Shape BZ Shape 14 Shape 13 Shape 05 Shape 04 Shape 4Z Shape CZ Shape 03 Shape 12 9-16 Pella 2007 Architectural Design Manual Division 08 Openings Windows and Doors www.pellaadm.com
Aluminum EnduraClad Exterior Design Data Unit Width (170 ) Clear Opening Width (90 ) Standard Sill Unit ADA Sill Unit Advanced Vent Vent (ADA) Visible Glass Frame Standard Unit Class and Grade 6' 8" DOORS 3081 F 76-3/8 77-11/16 75-7/8 7.8 16.7 R40 3681 F 76-3/8 77-11/16 75-7/8 10.4 20.0 R40 2681 L / R 21-5/16 19-11/16 76-3/8 77-11/16 75-7/8 11.3 11.5 5.7 14.1 R40 3081 L / R 25-15/16 24-5/16 76-3/8 77-11/16 75-7/8 13.8 14.0 7.8 16.7 R40 3481 L / R 29-7/16 27-13/16 76-3/8 77-11/16 75-7/8 15.6 15.9 9.3 18.6 R40 3681 L / R 31-15/16 30-5/16 76-3/8 77-11/16 75-7/8 16.9 17.2 10.4 20.0 R40 3881 L / R 33-13/16 32-3/16 76-3/8 77-11/16 75-7/8 17.9 18.2 11.3 21.1 R40 5081 PA / AP 45-5/16 / 21-5/16 44-5/16 / 19-11/16 76-3/8 77-11/16 75-7/8 24.4 24.8 11.5 27.8 R40 6081 PA / AP 55-3/16 / 25-15/16 53-9/16 / 24-5/16 76-3/8 77-11/16 75-7/8 29.3 29.8 15.6 33.0 R40 6781 PA / AP 62-3/16 / 29-7/16 60-9/16 / 27-13/16 76-3/8 77-11/16 75-7/8 33.0 33.5 18.7 36.9 R40 7281 PA / AP 67-3/16 / 31-15/16 65-9/16 / 30-5/16 76-3/8 77-11/16 75-7/8 35.6 36.2 20.9 39.6 R40 7581 PA / AP 71 / 33-7/8 69-3/8 / 32-1/4 76-3/8 77-11/16 75-7/8 37.6 38.3 22.6 41.8 R40 6' 10" DOORS 1 3082 F 77-3/4 79-1/16 77-1/4 8.0 17.0 R40 3682 F 77-3/4 79-1/16 77-1/4 10.7 20.4 R40 2682 L / R 21-5/16 19-11/16 77-3/4 79-1/16 77-1/4 11.5 11.7 5.9 14.4 R40 3082 L / R 25-15/16 24-5/16 77-3/4 79-1/16 77-1/4 14.0 14.2 8.0 17.0 R40 3482 L / R 29-7/16 27-13/16 77-3/4 79-1/16 77-1/4 15.9 16.2 9.5 19.0 R40 3682 L / R 31-15/16 30-5/16 77-3/4 79-1/16 77-1/4 17.2 17.5 10.7 20.4 R40 3882 L / R 33-13/16 32-3/16 77-3/4 79-1/16 77-1/4 18.2 18.6 11.5 21.4 R40 5082 PA / AP 45-5/16 / 21-5/16 44-5/16 / 19-11/16 77-3/4 79-1/16 77-1/4 24.8 25.2 11.7 28.3 R40 6082 PA / AP 55-3/16 / 25-15/16 53-9/16 / 24-5/16 77-3/4 79-1/16 77-1/4 29.8 30.3 15.9 33.5 R40 6782 PA / AP 62-3/16 / 29-7/16 60-9/16 / 27-13/16 77-3/4 79-1/16 77-1/4 33.6 34.1 19.1 37.5 R40 7282 PA / AP 67-3/16 / 31-15/16 65-9/16 / 30-5/16 77-3/4 79-1/16 77-1/4 36.3 36.9 21.3 40.3 R40 7582 PA / AP 71 / 33-7/8 69-3/8 / 32-1/4 77-3/4 79-1/16 77-1/4 38.3 39.0 23.1 42.5 R40 7' 2" DOORS 3086 F 82-1/4 83-1/2 81-3/4 R40 3686 F 82-1/4 83-1/2 81-3/4 R40 2686 L / R 21-5/16 19-11/16 82-1/4 83-1/2 81-3/4 12.2 12.4 6.3 15.2 R40 3086 L / R 25-15/16 24-5/16 82-1/4 83-1/2 81-3/4 14.8 15.0 8.5 17.9 R40 3486 L / R 29-7/16 27-13/16 82-1/4 83-1/2 81-3/4 16.8 17.1 10.2 20.0 R40 3686 L / R 31-15/16 30-5/16 82-1/4 83-1/2 81-3/4 18.2 18.5 11.4 21.5 R40 3886 L / R 33-13/16 32-3/16 82-1/4 83-1/2 81-3/4 19.3 19.6 12.3 22.6 R40 5086 PA / AP 45-5/16 / 21-5/16 44-5/16 / 19-11/16 82-1/4 83-1/2 81-3/4 26.2 26.6 12.5 29.9 R40 6086 PA / AP 55-3/16 / 25-15/16 53-9/16 / 24-5/16 82-1/4 83-1/2 81-3/4 31.5 32.0 17.0 35.4 R40 6786 PA / AP 62-3/16 / 29-7/16 60-9/16 / 27-13/16 82-1/4 83-1/2 81-3/4 35.5 36.1 20.4 39.6 R40 7286 PA / AP 67-3/16 / 31-15/16 65-9/16 / 30-5/16 82-1/4 83-1/2 81-3/4 38.4 39.0 22.8 42.6 R40 7586 PA / AP 71 / 33-7/8 69-3/8 / 32-1/4 82-1/4 83-1/2 81-3/4 40.5 41.2 24.6 44.8 R40 8' DOORS 3096 F 91-3/4 93-1/16 91-1/4 9.7 19.9 R40 3696 F 91-3/4 93-1/16 91-1/4 13.0 23.9 R40 2696 L / R 21-5/16 19-11/16 91-3/4 93-1/16 91-1/4 13.6 13.8 7.1 16.8 R40 3096 L / R 25-15/16 24-5/16 91-3/4 93-1/16 91-1/4 16.5 16.8 9.7 19.9 R40 3496 L / R 29-7/16 27-13/16 91-3/4 93-1/16 91-1/4 18.8 19.0 11.6 22.2 R40 3696 L / R 31-15/16 30-5/16 91-3/4 93-1/16 91-1/4 20.3 20.6 13.0 23.9 R40 3896 L / R 33-13/16 32-3/16 91-3/4 93-1/16 91-1/4 21.5 21.8 14.0 25.1 R40 5096 PA / AP 45-5/16 / 21-5/16 44-5/16 / 19-11/16 91-3/4 93-1/16 91-1/4 29.3 29.7 14.2 33.2 R40 6096 PA / AP 55-3/16 / 25-15/16 53-9/16 / 24-5/16 91-3/4 93-1/16 91-1/4 35.2 35.7 19.3 39.3 R40 6796 PA / AP 62-3/16 / 29-7/16 60-9/16 / 27-13/16 91-3/4 93-1/16 91-1/4 39.6 40.2 23.2 43.9 R40 7296 PA / AP 67-3/16 / 31-15/16 65-9/16 / 30-5/16 91-3/4 93-1/16 91-1/4 42.8 43.4 25.9 47.3 R40 7596 PA / AP 71 / 33-7/8 69-3/8 / 32-1/4 91-3/4 93-1/16 91-1/4 45.2 45.9 28.0 49.8 R40 (1) All dimensions are approximate to the nearest 1/16". The second value, where shown, provides the clear opening for the active panel only. (2) Water resistance is 0 psf for units with a low profile sill. Pella 2007 Architectural Design Manual Division 08 Openings Windows and Doors www.pellaadm.com 9-17
ARCHITECT S ERIES Wood Exterior Design Data Unit Width (170 ) Clear Opening Width (90 ) Standard Sill Unit ADA Sill Unit Advanced Vent Vent (ADA) Visible Glass Frame Standard Unit Class and Grade 6' 8" DOORS 3081 F 76-3/8 77-11/16 75-7/8 7.6 16.7 P 3681 F 76-3/8 77-11/16 75-7/8 10.2 20.0 P 2681 L / R 21-5/16 19-11/16 76-3/8 77-11/16 75-7/8 11.3 11.5 5.6 14.1 P 3081 L / R 25-15/16 24-5/16 76-3/8 77-11/16 75-7/8 13.8 14.0 7.6 16.7 P 3481 L / R 29-7/16 27-13/16 76-3/8 77-11/16 75-7/8 15.6 15.9 9.2 18.6 P 3681 L / R 31-15/16 30-5/16 76-3/8 77-11/16 75-7/8 16.9 17.2 10.2 20.0 P 3881 L / R 33-13/16 32-3/16 76-3/8 77-11/16 75-7/8 17.9 18.2 11.0 21.1 P 5081 PA / AP 45-5/16 / 21-5/16 44-5/16 / 19-11/16 76-3/8 77-11/16 75-7/8 24.4 24.8 11.1 27.8 P 6081 PA / AP 55-3/16 / 25-15/16 53-9/16 / 24-5/16 76-3/8 77-11/16 75-7/8 29.3 29.8 15.2 33.0 P 6781 PA / AP 62-3/16 / 29-7/16 60-9/16 / 27-13/16 76-3/8 77-11/16 75-7/8 33.0 33.5 18.3 36.9 P 7281 PA / AP 67-3/16 / 31-15/16 65-9/16 / 30-5/16 76-3/8 77-11/16 75-7/8 35.6 36.2 20.5 39.6 P 7581 PA / AP 71 / 33-7/8 69-3/8 / 32-1/4 76-3/8 77-11/16 75-7/8 37.6 38.3 22.0 41.8 P 6' 10" DOORS 3082 F 77-3/4 79-1/16 77-1/4 7.8 17.0 P 3682 F 77-3/4 79-1/16 77-1/4 10.5 20.4 P 2682 L / R 21-5/16 19-11/16 77-3/4 79-1/16 77-1/4 11.5 11.7 5.7 14.4 P 3082 L / R 25-15/16 24-5/16 77-3/4 79-1/16 77-1/4 14.0 14.2 7.8 17.0 P 3482 L / R 29-7/16 27-13/16 77-3/4 79-1/16 77-1/4 15.9 16.2 9.3 19.0 P 3682 L / R 31-15/16 30-5/16 77-3/4 79-1/16 77-1/4 17.2 17.5 10.5 20.4 P 3882 L / R 33-13/16 32-3/16 77-3/4 79-1/16 77-1/4 18.2 18.6 11.2 21.4 P 5082 PA / AP 45-5/16 / 21-5/16 44-5/16 / 19-11/16 77-3/4 79-1/16 77-1/4 24.8 25.2 11.4 28.3 P 6082 PA / AP 55-3/16 / 25-15/16 53-9/16 / 24-5/16 77-3/4 79-1/16 77-1/4 29.8 30.3 15.5 33.5 P 6782 PA / AP 62-3/16 / 29-7/16 60-9/16 / 27-13/16 77-3/4 79-1/16 77-1/4 33.6 34.1 18.7 37.5 P 7282 PA / AP 67-3/16 / 31-15/16 65-9/16 / 30-5/16 77-3/4 79-1/16 77-1/4 36.3 36.9 20.9 40.3 P 7582 PA / AP 71 / 33-7/8 69-3/8 / 32-1/4 77-3/4 79-1/16 77-1/4 38.3 39.0 22.5 42.5 P 7' 2" DOORS 3086 F 82-1/4 83-1/2 81-3/4 8.3 P 3686 F 82-1/4 83-1/2 81-3/4 11.2 P 2686 L / R 21-5/16 19-11/16 82-1/4 83-1/2 81-3/4 12.2 12.4 6.1 15.2 P 3086 L / R 25-15/16 24-5/16 82-1/4 83-1/2 81-3/4 14.8 15.0 8.3 17.9 P 3486 L / R 29-7/16 27-13/16 82-1/4 83-1/2 81-3/4 16.8 17.1 10.3 20.0 P 3686 L / R 31-15/16 30-5/16 82-1/4 83-1/2 81-3/4 18.2 18.5 11.2 21.5 P 3886 L / R 33-13/16 32-3/16 82-1/4 83-1/2 81-3/4 19.3 19.6 12.0 22.6 P 5086 PA / AP 45-5/16 / 21-5/16 44-5/16 / 19-11/16 82-1/4 83-1/2 81-3/4 26.2 26.6 12.1 29.9 P 6086 PA / AP 55-3/16 / 25-15/16 53-9/16 / 24-5/16 82-1/4 83-1/2 81-3/4 31.5 32.0 16.6 35.4 P 6786 PA / AP 62-3/16 / 29-7/16 60-9/16 / 27-13/16 82-1/4 83-1/2 81-3/4 35.5 36.1 20.0 39.6 P 7286 PA / AP 67-3/16 / 31-15/16 65-9/16 / 30-5/16 82-1/4 83-1/2 81-3/4 38.4 39.0 22.4 42.6 P 7586 PA / AP 71 / 33-7/8 69-3/8 / 32-1/4 82-1/4 83-1/2 81-3/4 40.5 41.2 24.1 44.8 P 8' DOORS 3096 F 91-3/4 93-1/16 91-1/4 9.4 19.9 P 3696 F 91-3/4 93-1/16 91-1/4 12.7 23.9 P 2696 L / R 21-5/16 19-11/16 91-3/4 93-1/16 91-1/4 13.6 13.8 6.9 16.8 P 3096 L / R 25-15/16 24-5/16 91-3/4 93-1/16 91-1/4 16.5 16.8 9.4 19.9 P 3496 L / R 29-7/16 27-13/16 91-3/4 93-1/16 91-1/4 18.8 19.0 11.4 22.2 P 3696 L / R 31-15/16 30-5/16 91-3/4 93-1/16 91-1/4 20.3 20.6 12.7 23.9 P 3896 L / R 33-13/16 32-3/16 91-3/4 93-1/16 91-1/4 21.5 21.8 13.7 25.1 P 5096 PA / AP 45-5/16 / 21-5/16 44-5/16 / 19-11/16 91-3/4 93-1/16 91-1/4 29.3 29.7 13.8 33.2 P 6096 PA / AP 55-3/16 / 25-15/16 53-9/16 / 24-5/16 91-3/4 93-1/16 91-1/4 35.2 35.7 18.9 39.3 P 6796 PA / AP 62-3/16 / 29-7/16 60-9/16 / 27-13/16 91-3/4 93-1/16 91-1/4 39.6 40.2 22.7 43.9 P 7296 PA / AP 67-3/16 / 31-15/16 65-9/16 / 30-5/16 91-3/4 93-1/16 91-1/4 42.8 43.4 25.4 47.3 P 7596 PA / AP 71 / 33-7/8 69-3/8 / 32-1/4 91-3/4 93-1/16 91-1/4 45.2 45.9 27.4 49.8 P (1) All dimensions are approximate to the nearest 1/16". The second value, where shown, provides the clear opening for the active panel only. (2) Water resistance is 0 psf for units with a low profile sill. 9-18 Pella 2007 Architectural Design Manual Division 08 Openings Windows and Doors www.pellaadm.com
Design Data Unit TRANSOMS Visible Glass Frame Class and Grade 2617 0.9 3.0 2625 1.6 4.4 3017 1.2 3.5 3025 2.2 5.2 3417 1.5 4.0 3425 2.6 5.8 3617 1.6 4.2 3625 2.9 6.2 3817 1.7 4.4 3825 3.2 6.5 5017 2.6 5.9 5025 4.7 8.7 6017 3.3 7.0 6025 5.9 10.3 6717 3.8 7.8 6725 6.8 11.5 7217 4.2 8.4 7225 7.4 12.4 7517 4.4 8.8 7525 7.8 13.0 Unit SIDELIGHTS Visible Glass Frame Class and Grade 1881 4.9 10.0 HGD-R25 1882 5.1 10.2 HGD-R25 1886 5.4 10.8 HGD-R25 1896 6.1 11.9 HGD-R25 To convert areas to square meters (m 2 ), multiply square feet by 0.0929. Contact your local Pella sales representative for new transom designs available February 2007. Design data tables for HurricaneShield impact-resistant glazing is online, www.pellaadm.com. Clear Opening Schematic Vent Schematic Pella 2007 Architectural Design Manual Division 08 Openings Windows and Doors www.pellaadm.com 9-19