JEWELERS COLLECTION LIGHTING INSTRUMENTS 1 Jewelers Collection Lighting Instruments
MACHINED RINGS Elegant in detail and exquisitely finished, the Jewelers Collection of fine lighting instruments is available for LED retrofit and halogen lamps. Fixtures feature a clean, simple design. The rear-loading lamp and ability to hold up to two accessories contributes to the simple elegance of the fixture. Available in stem, yoke and side-mount for lamps from MR16 to Par 38, the Jewelers Collection represents a time-tested, uncompromising industry standard, meticulously designed and precision-crafted. LED RETROFIT AND HALOGEN FIXTURES J21MR16 J13MR16 J65AR111 LED Retrofit Halogen J04MR16 J66AR111 LED Retrofit J06AR111 Halogen J01PAR20 J03PAR38 (COVER) Private Residence, Dallas, TX Architect: Frank Welch Lighting Designer: Bill Jansing, Lighting Consultants LLC 2 Jewelers Collection Lighting Instruments
FEATURES/BENEFITS of the J49 LED RETROFIT optional switch track or canopy mount options new Lock n Hide fitter allows for clean, no-clip look below BusRun retaining ring holds lamp and up to two accessories in position accepts LED retrofit or halogen lamps (consult tested LED sources at litelab.com) optional horizontal focus lock full 360 rotation fixture is machined to blemish-free architectural finish 3 Jewelers Collection Lighting Instruments
LED RETROFIT/HALOGEN: MR16 2 1/1 [53mm] LED: 15W (maximum) Halogen: MR16 12V [50W maximum] 12v/ 12v/ 4 1/1 [103mm] 2 3/1 LED: 15W (maximum) Halogen: MR16 12V [50W maximum] 2 1/1 [53mm] 12v/ 12v/ 2 9/1 4 1/1 [103mm] 2 3/1 2 3/1 J21MR16 (wallwash) J21MR16 3 13/1 LED: 15W (maximum) Halogen: MR16 12V [50W maximum] 2 9/1 2 3/1 12v/ 2 1/1 [53mm] 12v/ 4 1/1 [103mm] 2 3/1 4" m] M01-MR16 4 11/1 [119mm] J13MR16 15/1 J13MR16 5/1 mm] 4 15/1 [126mm] 3 5/1 [85mm] 6 13/1 [174mm] 2 3/4" [70mm] LED: J21MR1615W (maximum) Halogen: MR16 12V [50W maximum] 3 13/1 2 9/1 12v/ 12v/ 2 3/1 2 1/1 [53mm] 4 1/1 [103mm] 2 3/1 4 Jewelers Collection Lighting Instruments ] M01-MR16
JEWELERS COLLECTION LED RETROFIT/HALOGEN: MR16/AR111 J65AR111 LED Retrofit LED: 25W (maximum) 15/1 12v/ /277v 5 3/8" [136mm] 5 5/1 Halogen Halogen AR111 12V [75W maximum] 15/1 12v/ /277v 5 5/1 5 5/1 J04MR16 2 3/1 4 5/1 [110mm] 4 15/1 [126mm] 3 5/1 [85mm] 5 1/4" [134mm] LED: 15W (maximum) Halogen: MR16 12V [50W maximum] 15/1 2 3/4" [70mm] 3 13/1 [Sidecar] 2 9/1 2 3/1 J66AR111 LED Retrofit LED: 25W (maximum) 15/1 4 3/1 15/1 [Sidecar] 7 7/1 [189mm] 5 9/1 [141mm] [197mm] 2 15/1 [75mm] 5 Jewelers Collection Lighting Instruments
JEWELERS 4 3/1 COLLECTION [126mm] LED RETROFIT/HALOGEN: AR111/PAR20/PAR30/PAR38 [134mm] J06AR111 Halogen 5 7/8" [149mm] 4 5/1 2 3/1 [110mm] 4 15/1 [126mm] 3 5/1 [85mm] 5 1/4" [134mm] 15/1 4 3/1 J04MR16 2 15/1 [75mm] J13MR16 4 5/1 2 3/1 [110mm] 4 15/1 5 1/4" 15/1 7 7/1 [189mm] 5 9/1 [141mm] 2 3/4" [70mm] Halogen AR111 12V [75W maximum] 15/1 15/1 2 3/4" [70mm] 6 13/1 [174mm] 3 5/1 [85mm] 4 11/1 [119mm] 15/1 5 5/1 J21MR16 3 13/1 [Sidecar] 2 9/1 2 3/1 3 13/1 2 [6 J01PAR20 15/1 [197mm] M01-MR16 5 5/1 J01PAR20 7 3/8" [187mm] 5 7/8" [149mm] J01PAR20 4 3/1 J03PAR38 7 7/1 [189mm] 5 9/1 15/1 [141mm] 15/1 2 15/1 [75mm] J06AR111 7 7/1 [189mm] 5 9/1 [141mm] 15/1 4 27/8" 15/1 [75mm] LED: 30W (maximum) Halogen PAR20 120V, 230V (50W maximum) 6 13/1 [174mm] 4 11/1 [119mm] 15/1 4 3/1 15/1 5 11/1 [145mm] [197mm] 9 3/1 [234mm] 7" [178mm] 15/1 LED: 30W (maximum) 5 5/1 Halogen: PAR30 (short neck) 120V, 230V [75W maximum] 5 5/1 7 3/8" [187mm] 5 7/8" [149mm] 4 3/1 J03PAR38 J03PAR38 15/1 J06AR111 15/1 LED: 30W (maximum) Halogen: PAR38 120V, 230V [250W maximum] 7 3/8" [187mm] 5 7/8" [149mm] 15/1 9 3/1 [234mm] 7" [178mm] 15/1 4 3/1 4 3/1 5 5/1 5 11/1 [145mm] 6 Jewelers Collection [197mm] Lighting Instruments 5 5/1
BUSRUN BUSWAY FITTER OPTIONS 9AC for use with line voltage or side-car power supply 120v, 230v 4.88 [124mm] 9BC for use with remote low voltage transformer 12v only 4.88 [124mm] 9iC integral low voltage power supply [50w max.] 120v, 230v 7.75 [197mm] TRACK FITTER OPTIONS EUT-2, EUT-3 for use with 2- and 3-circuit spec track 120v, 230v, 277v 3.8 BT for use with 1-circuit basic track 120v, 230v 1.5 [38mm].75 [19mm] 1.18 [30mm] ACCESSORIES Filters + Lenses modify beam shape, quality or color of light, or subdue light output without the color change associated with dimming. Louvers +Screens provide glare cutoff and subdue light output Snoots minimize lamp visibility and spill while focusing beam spread. Linear Spread OL-5x30 OL-5x55 Universal Spread OL-55x75 Hexcell Louver LVH Light Block Screen B-15/N (15%) Tapered SNOOT-T Tapered Wallwash SNOOT-TW Beam Softener OL-SF UV Filter OL-FLAT-UV 7 Jewelers Collection Lighting Instruments
CANOPY OPTIONS 5 Machined Canopy CANOPY CANOPY WITH POWER SUPPLY (120V, 277V, 240V) -3-A -3-D -3-B 120V 230V 12v for remote transformer -3E-A 120V -3E-D 230V with 12v Power Supply 5 (127mm) diameter x 1/4 (6mm) height machined canopy. 5 (127mm) diameter x 1/4 (6mm) height machined canopy. (Transformer ordered separately. Junction box and raised mud ring not included.) 5 (127mm) diameter x 1/4 (6mm) height machined canopy with electronic low-voltage power supply. (Junction box and raised mud ring not included.) 2 Quick Connect Canopy -4E-A 120V -4E-D 230V with 12v Power Supply -4-A 120V -4-D 230V -4-B 12v for remote transformer QUICK CONNECT POWER SUPPLY QUICK CONNECT 360 2" CAP 360 2" CAP 2 (51mm) diameter flush machined quick-connect canopy. 2 Quick Connect Flange Kit QC-4K kit for use with -4 fixture. 2 CAP DOUBLE HEIGHT 4" SQUARE JUNCTION BOX (1) 2-1/8" + (1) 1-1/2" (NOT INCLUDED) QUICK CONNECT 4" J-BOX COVER 5" TRIMLESS MUD FLANGE MOUNTING SCREWS 2" CAP Box fill must be in compliance with National Electric Code Article 314. 8 Jewelers Collection Lighting Instruments
251 Elm Street Buffalo, New York 14203 716.856.4300 800.238.4120 www.litelab.com This document contains both conceptual renderings and product photos that are subject to change based on design, engineering, and manufacturing review and analysis.