Technical Description Hydraulic Ecavator R 9 B litronic` Machine for Industrial Applications Operating Weight 39, 1,6 t Engine Output 18 kw (5 HP) The Better Machine.
Engine Rating per ISO 99 18 kw (5 HP) at 1 /min. Model Liebherr D 96 TI-E Type 6 cylinder in-line Bore/Stroke 1/1 mm Displacement, l Engine operation -stroke diesel direct injection turbo-charged after-cooled reduced emissions Cooling water-cooled and integrated motor oil cooler Air cleaner dry-type air cleaner with pre-cleaner, primary and safety elements Fuel tank 75 l Electrical system Voltage V Batteries 1 Ah/1 V Starter V/5, kw Alternator three phase current V/55 A Engine idling sensor controlled Hydraulic System Hydraulic pump for attachment and travel drive Liebherr variable flow, swash plate double pump Ma. flow 6 l/min Ma. pressure 35 bar Pump regulation electro-hydraulic with electronic engine speed sensing regulation, pressure compensation, flow compensation, automatic oil flow optimizer, flow summation Hydraulic pump for swing drive reversible, variable flow, swash plate pump, closed-loop circuit Ma. flow 15 l/min Ma. pressure 35 bar Hydraulic tank l Hydraulic system 68 l Hydraulic oil filter 1 full flow filter in return line with integrated fine filter area (5 mm) Hydraulic oil cooler compact cooler, consisting of a water, a hydraulic oil cooler and after-cooler and hydrostatically driven fan MODE selection adjustment of machine performance and the hydraulics via a mode selector to match application LIFT for lifting FINE for precision work and lifting through very sensitive movements ECO for especially economical and environmentally friendly operation POWER for maimum digging power and heavy duty jobs R.P.M adjustment stepless adjustment of engine output via the r.p.m. at each selected mode Swing Drive Drive by Liebherr swash plate motor with integrated brake valves Transmission Liebherr compact planetary reduction gear Swing ring Liebherr, sealed single race ball bearing swing ring, internal teeth Swing speed 6, 1 /min. stepless Swing torque 11,7 knm Holding brake wet multi-disc (spring applied, pressure released) Option pedal controlled positioning brake Operator s Cab Cab built from deep drawn components, resiliently mounted, sound insulated, tinted windows, front window stores overhead, door with sliding window Operator s seat shock absorbing suspension, adjustable to operator s weight, 6-way adjustable seat with mountable head rest Joysticks integrated into adjustable seat consoles Monitoring menu driven query of current operating conditions via the LCD display. Automatic monitoring, display, warning (acoustical and optical signal) and saving machine malfunction data, for eample, engine overheating, low engine oil pressure or low hydraulic oil level Heating system standard air conditioning, combined cooler/heater, additional dust filter in fresh air/recirculated Noise emission ISO 6396 L pa (inside cab) = 76 db(a) /1/EC L wa (surround noise) = 6 db(a) Undercarriage Versions: heavy duty, wide gauge heavy duty, etra wide gauge Drive Liebherr swash plate motors with integrated brake valves on both sides Transmission Liebherr planetary reduction gears Travel speed low range,9 km/h high range 5, km/h Drawbar pull ma. 336 kn Track components D 7, maintenance-free Track rollers/ carrier rollers 9/ Tracks sealed and greased Track pads triple grouser Digging locks wet multi-discs (spring applied, pressure released) Brake valves integrated into travel motor Hydraulic Controls Power distribution via monoblock control valve with integrated safety valves Flow summation to boom and stick Closed-loop circuit for uppercarriage swing drive Servo circuit Attachment and swing proportional via joystick levers Travel proportional via foot pedals or removable hand levers speed pre-selection Additional functions via foot pedals or joystick toggle switch Attachment Type bo-type, combination of resistant steel plates and cast steel components Hydraulic cylinders Liebherr cylinders with special sealsystem, shock absorbed Pivots sealed, low maintenance Lubrication easily accessible centralized lubrication Hydraulic connections pipes and hoses equipped with SAE splitflange connections Technical Data
E D A W H C K Q P X V L U Z N S B G mm A 3 C for undercarriage 3 for undercarriage 38 D for undercarriage 365 for undercarriage 3315 E for undercarriage 3 for undercarriage 35 Hfor undercarriage 735 for undercarriage 815 K for undercarriage 175 for undercarriage 1355 L for undercarriage 5 for undercarriage 5 P 115 Q 5 U for undercarriage 915 for undercarriage 915 S for undercarriage 6 for undercarriage 36 N 5 6 75 B for undercarriage 3198 3 335 for undercarriage 198 35 G for undercarriage 3395 3395 3395 for undercarriage 395 395 395 Z for undercarriage 575 for undercarriage 5775 with industrial- with industrial- type gooseneck type gooseneck boom 7,7 m boom 9, m Stick length m mm mm V for,8 75 6, 65 7,8 V for,8 75 6, 65 75 7,8 58 W,8 6, 75 65 7,8 15 X for,8 11 6, 11 7,8 X for,8 115 6, 115 165 7,8 15 Dimensions 3
ft 5 5 m 16 1 1 Attachment Envelope Industrial-type gooseneck boom pinned in upper hole of boom foot bearing 1 with industrial stick,8 m (clam suspension pivot) with industrial stick 6, m (clam suspension pivot) 3 with industrial stick,8 m, grapple model 7 C for undercarriage or 71 for undercarriage with industrial stick 6, m, grapple model 7 C for undercarriage or 71 for undercarriage 35 3 5 8 6 15 5-5 - -15 - -5 - - -6-8 16 5 1 5 1 35 3 1 3 8 5 6 15 5 m ft Operating Weight and Ground Pressure Operating weight includes basic machine with heavy counterweight 9, t, 7,7 m industrial gooseneck boom, 6, m industrial stick and grapple model 7 C. Undercarriage * Pad width mm 5 6 75 5 6 75 Weight kg 39 396 6 1 Ground pressure kg/cm,91,76,61,93,78,6 * with grapple model 71 Industrial Attachment with Industrial- Type Gooseneck Boom 7,7 m
with industrial stick,8 m Height Under- Radius of load from centerline of machine in m carriage in m,5 6, 7,5 9,,5 1, 13,5 13,5 1, 1, (13,#) 7,8# ( 7,8#) 13,# (13,#) 8,# ( 8,#),5 8,5 (11,#) 6,1 (7,9#) 11,# (11,#) 8,3# (8,3#) 9, 8,5 (,9#) 6, (9,1 ),9# (,9#) 8,8 (9,3 ) 5,# (5,#) 7,5 1, (1,9#) 8, (11,1#) 6, (9, ),7 (6,9 ) 1,9# (1,9#) 11,# (11,#) 8,7 (9, ) 6,7 (7,1 ) 6, 17,3# (17,3#) 11,5 (13,8#) 8, (11,6#) 6, (8,8 ),6 (6,8 ) 17,# (17,#) 13,9# (13,9#) 11,5 (11,7#) 8,5 (9, ) 6,6 (7, ),5 16,6 (19,7#),7 (15,#) 7,6 (11,3 ) 5,7 (8,5 ),5 (6,7 ) 3,5 (5,) 19,9# (19,9#) 15,1# (15,1#) 11, (11,6 ) 8,3 (8,7 ) 6,5 (6,8 ) 5, (5,5) 3, 1,8 (,#) 9,8 (15,3 ) 7,1 (,8 ) 5,5 (8, ),3 (6,5 ) 3,5 (5,3) 1,8# (1,8#) 1,7 (15,6 ),5 (11,1 ) 8, (8, ) 6,3 (6,7 ) 5, (5,) 1,5 9,5# ( 9,5#) 9,1 (1,5 ) 6,7 (, ) 5, (8, ), (6,3 ) 3, (5,) 9,3# ( 9,3#) 13,9 (1,9 ), (,7 ) 7,7 (8, ) 6, (6,5 ) 5,1 (5,) 8,8# ( 8,8#) 8,7 (1, ) 6,5 (,1 ) 5, (7,8 ),1 (6, ) 3, (5,) 8,8# ( 8,8#) 13,5 (1, ) 9,7 (,3 ) 7,5 (8, ) 6,1 (6, ) 5,1 (5,) 1,5 8,6 (13,8 ) 6,3 ( 9,9 ),9 (7,6 ), (6, ) 13,3 (1, ) 9,6 (, ) 7, (7,9 ) 6, (6, ) 3, with industrial stick 6, m Height Under- Radius of load from centerline of machine in m carriage in m,5 6, 7,5 9,,5 1, 13,5 13,5 6,# ( 6,#) 6,7# ( 6,7#) 1, 9, (,#) 6, (7,#),# (,#) 7,3# (7,3#),5 9,1 (,#) 6,6 (9,#),9 (6,#),# (,#) 9,# (9,#) 6,# (6,#) 9, 9,1 (,#) 6,7 (9,1#) 5, (7,3 ),# (,#) 9,1# (9,1#) 7,1 (7,5 ) 7,5 8,9 (,3#) 6,5 (9,3#) 5, (7, ) 3,9 (5,7),3# (,3#) 9,1 (9,3#) 7, (7, ) 5,6 (5,9) 6, 8,5 (,8#) 6,3 (9, ),9 (7,1 ) 3,8 (5,6),8# (,8#) 8,9 (9, ) 6,9 (7,3 ) 5,5 (5,8),5 17,# (17,#) 11,5 (13,7#) 8,1 (11,5#) 6, (8,8 ),7 (6,9 ) 3,7 (5,5) 17,5# (17,5#) 13,8# (13,8#) 11,5 (11,5#) 8,6 (9,1 ) 6,7 (7,1 ) 5, (5,7) 3,8# (3,8#) 3, 16, (,#),5 (15,1#) 7,5 (11,3 ) 5,7 (8,5 ),5 (6,7 ) 3,6 (5,),9 (,5 ),3# (,3#) 15,# (15,#),9 (11,5 ) 8, (8,7 ) 6,5 (6,9 ) 5,3 (5,6), (,6 ) 1,5 1, (,1#) 9,6 (15, ) 7, (,7 ) 5, (8, ),3 (6,5 ) 3,5 (5,3),9 (, ) 18,9# (18,9#) 1, (15, ),3 (11, ) 7,9 (8, ) 6,3 (6,7 ) 5, (5,5),3 (,6 ) 11,# (11,#) 8,9 (1,3 ) 6,6 (, ) 5,1 (7,9 ),1 (6,3 ) 3, (5,),9 (,1#) 11,# (11,#) 13,7 (1,7 ) 9,9 (,5 ) 7,6 (8,1 ) 6,1 (6,5 ) 5,1 (5,) 1,5,6# (,6#) 8,6 (13,8 ) 6,3 ( 9,9 ) 5, (7,7 ), (6, ) 3,3 (5,),7# (,7#) 13,3 (1, ) 9,6 (, ) 7, (7,9 ) 6, (6, ) 5, (5,3) 3, 8, (13,7 ) 6, ( 9,8 ),9 (7,6 ), (6,1 ) 13, (1,1 ) 9,5 (,1 ) 7, (7,8 ) 6, (6,3 ) The lift capacities are stated in metric tonnes (t) on the lifting gear s stick tip, and can be lifted 36h on firm, level supporting surface. Values quoted in brackets are valid for the undercarriage when in longitudinal position. Capacities are valid for 6 mm wide triple grouser pads. Indicated loads are based on ISO 567 standard and do not eceed 75 % of tipping or 87 % of hydraulic capacity (indicated via #). Lifting capacity of the ecavator is limited by machine stability, hydraulic capacity and maimum permissible load of the load hook. When lifting loads, the hydraulic ecavator must be equipped with automatic check valve on its hoist cylinders and overload warning device according to European Standard, EN 7-5. Lift Capacities at End of Stick 5
Attachment Envelope ft 55 5 m 18 16 Industrial-type gooseneck boom pinned in upper hole of boom foot bearing 1 with industrial stick 6, m (clam suspension pivot) with industrial stick 7,8 m (clam suspension pivot) 3 with industrial stick 6, m and grapple model 7 C with industrial stick 7,8 m and grapple model 7 C 5 1 1 35 3 5 8 6 15 5-5 - - -15 - -5-3 - -6-8 - 18 16 1 1 1 3 8 6 m Operating Weight and Ground Pressure Operating weight includes basic machine with heavy counterweight 9, t, 9, m industrial gooseneck boom, 6, m industrial stick and grapple model 7 C. 55 5 5 35 3 5 15 5 ft Undercarriage Pad width mm 5 6 75 Weight kg 6 16 Ground pressure kg/cm,93,78,6 Industrial Attachment with Industrial- Type Gooseneck Boom 9, m 6
with industrial stick 6, m Height Under- Radius of load from centerline of machine in m carriage in m,5 6, 7,5 9,,5 1, 13,5 15, 16,5 16,5 15, 13,5 1,,5 9, 7,5 6,,5 3, 1,5 1,5 3, 7,# ( 7,#),1# (,1#) 8,# (8,#) 8,8# (8,8#) 7, (7,) 8,7# (8,7#) 7,1 (7,) 5,5 (5,8) 9,9# ( 9,9#) 8,8# (8,8#) 7, (7,) 5,5 (5,8),3# (,3#) 8,9 (9,#) 6,9 (7,) 5, (5,7), (,6) 13,1# (13,1#),8# (,8#) 8,6 (9, ) 6,7 (7,) 5,3 (5,6),3 (,6) 19,# (19,#) 1,# (1,#),8 (11,5 ) 8,1 (8,6 ) 6, (6,8) 5,1 (5,), (,5),1# (,1#) 1,1 (15,1 ),1 (,7 ) 7,7 (8, ) 6,1 (6,5) 5, (5,3),1 (,) 5,1# ( 5,1#) 13,1 (1, ) 9,5 (,1 ) 7,3 (7,8 ) 5,9 (6,),8 (5,1), (,3) 5,1# ( 5,1#) 1,5 (1,8#) 9,1 ( 9,7 ) 7, (7,5 ) 5,7 (6,),7 (5,), (,) 6,# ( 6,#) 11,8# (11,8#) 8,8 ( 9, ) 6,8 (7,3 ) 5,5 (5,9),6 (,9) 3,9 (,) 8,7 ( 9,3 ) 6,7 (7, ) 5,5 (5,8),6 (,9),5 with industrial stick 7,8 m Height Under- Radius of load from centerline of machine in m carriage in m,5 6, 7,5 9,,5 1, 13,5 15, 16,5 16,5 7,3# ( 7,3#) 15, 13,5 1,,5 9, 7,5 6,,5 3, 1,5 1,5 3,,5 7,5# (7,5#),8# (,8#) 7,# (7,#),7# (,7#) 7,# (7,#) 5,9 (6,3 ) 7,# (7,#) 6, (6,3 ),7 (5,) 7,# (7,#) 6, (6,3 ),8 (5,) 3,8 (,) 8,# (8,#) 7, (7,#) 5,8 (6,1 ),7 (5,) 3,8 (,) 8,5# (8,5#) 7,1 (7,5 ) 5,7 (6, ),6 (,9) 3,8 (,) 1,5# (1,5#),# (,#) 8,8 (9,#) 6,8 (7, ) 5,5 (5,8 ),5 (,7) 3,7 (3,9) 18,5# (18,5#) 13,9# (13,9#) 11, (11,#) 8,3 (8,8 ) 6,5 (6,9 ) 5,3 (5,6 ),3 (,6) 3,6 (3,8) 3, (3,) 16,9# (16,9#) 1,3 (15,#), (,9 ) 7,8 (8,3 ) 6, (6,6 ) 5, (5,3 ), (,) 3,5 (3,7) 3, (3,) 8,1# ( 8,1#) 13, (1, ) 9,6 (, ) 7, (7,8 ) 5,9 (6,3 ),8 (5,1 ), (,3) 3, (3,6) 7,# ( 7,#) 1,5 (13, ) 9,1 ( 9,7 ) 7, (7,5 ) 5,7 (6, ),7 (5, ) 3,9 (,) 3, (3,6) 7,5# ( 7,5#) 1,1 (13, ) 8,8 ( 9, ) 6,8 (7,3 ) 5,5 (5,9 ),6 (,9 ) 3,9 (,1) 3, (3,6) 1, (1,9 ) 8,6 ( 9, ) 6,7 (7,1 ) 5, (5,8 ),5 (,8 ) The lift capacities are stated in metric tonnes (t) on the lifting gear s stick tip, and can be lifted 36h on firm, level supporting surface. Values quoted in brackets are valid for the undercarriage when in longitudinal position. Capacities are valid for 6 mm wide triple grouser pads. Indicated loads are based on ISO 567 standard and do not eceed 75 % of tipping or 87 % of hydraulic capacity (indicated via #). Lifting capacity of the ecavator is limited by machine stability, hydraulic capacity and maimum permissible load of the load hook. When lifting loads,the hydraulic ecavator must be equipped with automatic check valve on its hoist cylinders and overload warning device according to European Standard, EN 7-5. Lift Capacities at End of Stick 7
D Fied cab elevation Height 1 mm B for undercarriage 387 mm for undercarriage 395 mm C for undercarriage mm for undercarriage 8 mm D 5 mm C B C B D D1 Hydr. adjustable cab elevation (Parallelogram) B1 for undercarriage 67 mm for undercarriage 75 mm B for undercarriage 57 mm for undercarriage 515 mm C1 for undercarriage 3 mm for undercarriage 38 mm C for undercarriage 56 mm for undercarriage 568 mm D1 mm D 136 mm E for undercarriage 315 mm for undercarriage 35 mm C1 B1 E The parallelogram cab raiser the operator can determine his work position at will within the devices range. For a lower transport height, the shell of the cab can be removed. The overall height is then dimension E. As cab protection a front window screen can be installed. Cab guard for cab with rigid elevation Screen for cab guard Note: This screen protects the front window and fits only the cab guard for cab with rigid elevation. Front window can still be opened. Front window screen Note: Fits all cabs, front window can still be opened. Choice of Cab Elevations and Cab Protections 8
Shells for loose material Clamshell model B Shells for loose material with cutting edge (without teeth) Cutting width mm 1 16 Capacity m 3 1,3 1,5, For loose material, specific weight up to t/m 3 1,5 1,5 1,5 Weight kg 113 15 Clamshell model 1 Shells for loose material with cutting edge (without teeth) Cutting width mm 1 1 Capacity m 3 1,5, For loose material, specific weight up to t/m 3 1,5 1, Weight kg 193 197 Grapple model 7 C (5 tines) open semi-closed closed tines tines tines Capacity m 3,8 1,,8 1,,8 1, Weight kg 15 15 17 183 19 3 Grapple model 71 (5 tines) open semi-closed closed tines tines tines Capacity m 3,8 1, 1,,8 1, 1,,8 1, 1, Weight kg 169 17 17 18 198 19 6 15 Multiple Tine Grapples Crane hook with suspension Ma. load t 1,5 Height with suspension mm 15 Weight kg 65 Crane Hook Electro-magnets with suspension Generator kw 9 1 Diameter of magnet mm 1 13 Height with suspension mm 17 17 Weight kg 133 17 Electro Magnet For further information see Attachment-Information Liebherr Hydraulic Clamshells and Grapples. To operate a magnet the installation of a generator is required; please contact your Liebherr dealer or the factory for further information. Variety of Tools 9
Standard Equipment Undercarriage Two-speed travel Track guides on idler end Life time lubricated track rollers Travel drive completely integrated into the undercarriage frame Tracks sealed and greased Optional Equipment Track guides at sprocket and in center Conversion kit track D 7 to D 7 G Sprocket with dirt ejector Reinforced base-plate center-piece Uppercarriage Engine hood with lift help Lockable tool bo Main switch for electric circuit Handrails, non slip surfaces Tool Kit Maintenance-free swing brake lock Maintenance-free HD-batteries Sound insulation Mechanical swing lock upper/lower Hydraulics Electronic engine-speed-sensing control Stepless work mode selector Pressure storage for controlled lowering of attachments with engine turned off Hydraulic tank shut-off valve Pressure compensation Flow compensation Filter with integrated fine filter area (5 mm) Pressure test ports Engine Direct injection Turbo charger Dry-type air cleaner w/pre-cleaner, main and safety element Sensor controlled engine idling Operator s Cab Deep drawn cab shell components All tinted windows Door with sliding window All-round adjustable roof flap Rain protective shade for front window Cab heater with defroster Washer and wiper 6-way adjustable cloth suspension seat Seat and consoles independently adjustable Air conditioner Coat hook Dome light Sun visor Inside rear mirrors Radio installation prep-kit Cigar lighter and ashtray Removable custom floor mat Storage and Literature tray Digital instrumentation Digital instruments for oil temp. engine RPM and oil pressure Digital hour meter visible from outside Attachment Cylinders with shock absorbers Sealed pivots Centralized lube points SAE split flanges on all high pressure lines Work light on boom Electric fuel tank filler pump Foot pedal swing positioning brake Etended tool kit Main switch for electric circuit Customized colors Additional hydraulic circuits Bio-degradable hydr. oil Filter for secondary circuit Engine cold starting aid Removable lower section of front window with storage AM/FM stereo radio w/cassette Air power seat adjustment with head rest and heating Warning beacon Electronic anti theft device Additional flood lights Armored front windshield (not removable) Safety check valves for hoist cylinders, high mounted Overload warning device Customized colors Liebherr line of clams and grapples Quick disconnect hose couplers Options and/or special attachments, supplied by vendors other than Liebherr, are only to be installed with the knowledge and approval of Liebherr to retain warranty. LFR/SP 167--3.3 Printed in Germany by Typodruck Gagstatter. Illustrations and data may differ from standard equipment. Subject to change without notice. All indicated loads are based in accordance with ISO 98. LIEBHERR-FRANCE SAS,, Avenue Joseph Rey, B.P. 87, F-685 Colmar-Cede, ç 3 89 1 35, Fa 3 89 1 37 93 www.liebherr.com, E-Mail: info@lfr.liebherr.com With compliments: