Product Information Log Loader LH 60 M Timber Operating weight: 44,800 kg Engine: 200 kw / 272 HP Stage IV Stage IIIA
2 LH 60 M Timber Litronic Performance Power plus speed Redefined performance
Economy Good investment Savings for long-term Reliability Durability and sustainability Quality down to the last detail Comfort Perfection at a glance When technology is comfortable Maintainability Efficiency bonus Even with maintenance and service LH 60 M Timber Litronic 3
Well Thought Out to the last Detail 4 LH 60 M Timber Litronic
Twin Engine Travel Drive Higher driving performance thanks to greater pulling power at max. speed More efficient driving without gear shifting for fluid working operation Powerful, robust, reliable and quiet Rigid Cab Elevation LFC 120 New, clever, space-saving access system with integrated treads and 10 inclination for easy access and more safety Mudguards Robust construction of hot-dip galvanised steel for a long service life in tough timber applications Integrated rubber flaps provide maximum splash protection when driving forward or in reverse LH 60 M Timber Litronic 5
Convincing in Operation Performance Economy Enhanced Driving Performance With an engine output of 200 kw, the system has maximum torque for high speeds at its disposal. The stepless drive train also maintains the speed at a constant level in the optimum range for maximum acceleration with consistently high pulling power. In this way, a high level of driving performance can be consistently drawn upon even on gradients. Convincing Dynamics The combination of 200 kw engine output and a high pump delivery rate guarantees maximum acceleration and the highest speed of the working movements. 4-Wheel Steering The standard 4-wheel steering provides for great agility and manoeuvrability of the log loader, even in the tight space of a timberyard. Furthermore, the 4-wheel steering increases driving stability and improves true running. LSC Hydraulic System The cleverly engineered machine control system assures optimum adaptation of the hydraulics to the respective deployment scenario. Here, the new 2-circuit Liebherr-Synchron-Comfortsystem (LSC) with LUDV technology (flow distribution independent of load pressure) provides optimum distribution of the pump delivery rate with superimposed movements a less fuel consumption compared with the previous model. Speed and strength are there where they are needed. Liebherr-Power Efficiency (LPE) LPE optimises the interaction of the drive components in terms of efficiency and enables machine operation in the area of the lowest specific fuel use for less consumption and greater efficiency with the same performance. 6 LH 60 M Timber Litronic
Reliability Comfort Maintainability Quality and Competence Our experience, understanding of customer needs and the technical implementation of these findings guarantee the success of the product. For decades, Liebherr has been inspirational with its depth of production and system solutions. Key components such as the diesel engine, electronic components, slewing ring, swivelling drive and hydraulic cylinders are developed and produced by Liebherr itself. The great depth of inhouse manufacturing guarantees maximum quality and ensures that components are optimally configured to each other. Protective Devices Especially in tough timber application the material handlers are strained heavily. The optional available protective devices extend the component service life and guarantee high machine availability with maximum safety for people and machine. Intelligent Self Diagnostics The clever control electronics permanently monitor the vital functions of the machine to guarantee a high level of machine availability. Components which are critical for safety are designed with redundancy to guarantee maximum safety. Proportional Control In timberyards, where space is tight, precision and fine control are especially important. The 4-way mini-joystick with its proportional control make efficient use of the machine easier. Moreover, functions such as support and joystick steering are controlled via the two mini-joysticks. Clearing measures can be carried out in this way with ease and precision using both hands on the joystick. Slewing Gear Brake in Right Rocker Switch The standard slewing gear brake can be activated with the rocker switch in the right-hand joystick, which means that reaching around during the work cycle is therefore no longer necessary. When cornering at high speeds, the operator can quickly intervene and prevent the uppercarriage from breaking away. Maximum comfort for maximum safety. Electric Pilot Control All work functions of the machine are controlled electrically, whereby the signals of the transmitters are only converted directly at the control block by hydraulic means. This technology enables end position damping of the attachment in order to protect the components and thus extend their service life. Simple, individual adjustment of the working speed of the boom, stick and swivel mechanism make it possible for the driver to adapt the machine ideally to each deployment scenario and fully utilise its capacity. Service-based Machine Design The service-based machine design guarantees short servicing times, thus minimising maintenance costs due to the time it saves. All the maintenance points are easily accessible from the ground and easy to reach due to the large, wideopening service doors. The enhanced service concept places the maintenance points close to each other and reduces their number to a minimum. This means that service work can be completed even more quickly and efficiently. Integral Maintenance Benefits Completing maintenance work helps keep the machine fully functional. Maintenance work does, however, mean machine down times which must be minimised. Automatic central lubrication systems for attachment and the uppercarriage as well as optional systems for the undercarriage, quick coupling system and working tools not only make it easier to observe the recommended lubrication intervals and ensure a long service life for the components, but also increase the productivity of the Liebherr log loader LH 60 M Timber. LH 60 M Timber Litronic 7
Technical Data Diesel Engine Rating per ISO 9249 Model Type Bore / Stroke Displacement Engine operation Air cleaner Engine idling Electrical system Voltage Batteries Alternator Stage IV Harmful emissions values Emission control Fuel tank Urea tank Stage IIIA Harmful emissions values Fuel tank Hydraulic System 200 kw (272 HP) at 1,800 RPM Liebherr D944 4 cylinder in-line 130 / 150 mm 8.0 l 4-stroke diesel Common-Rail turbo-charged and after-cooled reduced emissions dry-type air cleaner with pre-cleaner, primary and safety elements sensor controlled Hydraulic pump for attachment and travel drive Max. flow Max. pressure for swing drive 24 V 2 x 180 Ah / 12 V three-phase current 28 V / 140 A Hydraulic tank Hydraulic system Hydraulic oil filter in accordance with 97/68/EG stage IV Liebherr-SCR technology 518 l 65 l MODE selection in accordance with 97/68/EG stage IIIA 518 l S (Sensitive) Max. flow Max. pressure Hydraulic pump regulation and control E (Eco) Cooling System Diesel engine water-cooled compact cooling system consisting cooling unit for water, hydraulic oil and charge air with stepless thermostatically controlled fan P (Power) P (Power-Plus) Engine speed and performance setting Option Hydraulic Controls Power distribution Servo circuit Attachment and swing Chassis Additional functions Proportional control 8 LH 60 M Timber Litronic 2 Liebherr axial piston variable displacement pumps (double construction) 2 x 302 l/min. 350 bar reversible axial piston variable displacement pump, closed-loop circuit 199 l/min. 370 bar 2 circuit Liebherr-Synchron-Comfort-system (LSC) with electronic engine speed sensing regulation, pressure and flow compensation, automatic oil flow optimizer 265 l 890 l 2 main return filters with integrated partial micro filtration (5 µm) adjustment of engine and hydraulic performance via a mode pre-selector to match application, e.g. for especially economical and environmentally friendly operation or for maximum material handling and heavy-duty jobs mode for precision work and lifting through very sensitive movements mode for especially economical and environmentally friendly operation mode for high performance with low fuel consumption mode for highest performance and for very heavy duty applications, suitable for continuous operation stepless alignment of engine output and hydraulic power via engine speed Tool Control: ten preadjustable pump flows and pressures for add on tools Swing Drive via control valves with integrated safety valves, simultaneous actuation of chassis and attachment. Swing drive in separate closed circuit Drive with hydraulic pilot control and proportional joystick levers electroproportional via foot pedal via switch or electroproportional foot pedals proportionally acting transmitters on the joysticks for additional hydraulic functions Swing speed Swing torque Holding brake Option Swing ring Liebherr axial piston motor in a closed system, Liebherr planetary reduction gear Liebherr, sealed race ball bearing swing ring, internal teeth 0 8.0 RPM stepless 118 knm wet multi-disc (spring applied, pressure released) pedal controlled positioning swing brake
Operator s Cab Cab Operator s seat Comfort Option Premium Control system Operation and displays Air-conditioning TOPS safety cab structure (tip-over protection) with individual windscreens or featuring a slide-in subpart under the ceiling, work headlights integrated in the ceiling, a door with a sliding window (can be opened on both sides), large stowing and depositing possibilities, shock-absorbing suspension, sounddamping insulating, tinted laminated safety glass, separate shades for the sunroof window and windscreen Undercarriage Drive transfer gearbox with 2 Liebherr axial piston motor and functional brake valve on both sides Travel speed Joystick and wheel steering Driving operation Axles air cushioned operator s seat with 3D-adjustable armrests, headrest, lap belt, seat heater, adjustable seat cushion inclination and length, lockable horizontal suspension, automatic weight adjustment, adjustable suspension stiffness, pneumatic lumbar vertebrae support and passive seat climatisation with active coal in addition to operator s seat comfort: active elec tronic weight adjustment (automatic readjustment), pneumatic low frequency suspension and active seat climatisation with active coal and ventilator joysticks with arm consoles and swivel seat, folding left arm console large high-resolution operating unit, selfexplanatory, colour display with touchscreen, video-compatible, numerous setting, control and monitoring options, e.g. air conditioning control, fuel consumption, machine and tool parameters automatic air-conditioning, recirculated air function, fast de-icing and demisting at the press of a button, air vents can be operated via a menu; recirculated air and fresh air filters can be easily replaced and are accessible from the outside; heating-cooling unit, designed for extreme out-side temperatures, sensors for solar radiation, inside and outside temperatures Four wheel steering Steering reversal control Service brake Holding brake Stabilization Option Attachment Type Hydraulic cylinders Bearings high-strength steel plates at highlystressed points for the toughest requirements. Complex and stable mountings of attachment and cylinders Liebherr cylinders with special seal system as well as shock absorption sealed, low maintenance Complete Machine Lubrication Option Steps system Noise emission ISO 6396 2000/14/EC 0 10.0 km/h stepless (creeper speed) 0 20.0 km/h stepless automotive driving using accelerator pedal, cruise control function: storage of variable accelerator pedal positions 70 t drive axles; manual or automatic hydraulically controlled front axle oscillation lock standard standard two circuit travel brake system with accumulator; disc brake disc brake stabilizer blade rear stabilizer blade rear and front Liebherr central lubrication system for uppercarriage and attachment, automatically Liebherr central lubrication system for undercarriage, automatically safe and durable access system with anti-slip steps main components hot-galvanised L pa (inside cab) = 71 db(a) LWA (surround noise) = 105 db(a) LH 60 M Timber Litronic 9
Dimensions 3297 3133 3369 3338 5335 5101 LH60 3595 1927 507 674 1800 418 H1168 1689 3600 6361 3600 3763 5335 5101 LH60 1927 674 507 507 674 1689 418 H1174 1689 6978 3600 3763 Turn Radius Trailer coupling LH60 R 6390 930 H1169 R 7020 H1170 30 R 3000 Tyres 18.00-25 10 LH 60 M Timber Litronic
Choice of Cab Elevation Cab Elevation LFC (Rigid Elevation) D C1 C Increase type LFC 120 Height 1,200 mm B 4,627 mm C 5,101 mm C1 5,335 mm D 770 mm A rigid cab elevation has a fixed eye level height. For a lower transport height, the shell of the cab can be removed and replaced by a transport device. On this machine dimension C is 4,205 mm. LH60 B H1171 Cab Protection Integral Guard LH 60 M Timber Litronic 11
Attachment GA11 15 Operating Weight H1172 14 45 The operating weight includes the basic machine with stabilizer blade, rigid cab elevation, 4 pneumatic tyres, straight boom 7.00 m, angled stick 4.50 m and wood grab model GMH 50 / 3.20 m2. 13 40 12 11 35 Weight 10 30 9 8 25 Dimensions 7 20 6 5 15 4 10 3 5335 LH60 LH60 3900 2 5 1 0 0 H1173-1 -5 7600-2 11100-3 -10-4 -15-5 m 14 13 12 11 10 ft 45 40 35 9 30 8 25 7 6 5 20 4 15 3.0 m m 3 2 10 0 m 1 5 0 ft 4.5 m 6.0 m 7.5 m 9.0 m 10.5 m Undercarriage 13.5 12.0 10.5 9.0 7.5 6.0 4.5 3.0 1.5 0 44,800 kg Height m 15.2* 15.2* 15.2* 15.2* 15.2* 15.2* Can be slewed through 360 13.4* 13.4* 13.4* 14.4* 14.4* 14.4* 17.4 18.6* 18.6* 16.1 20.2 21.2* 14.9 18.6 19.8 11.2* 11.2* 11.2* 11.1* 11.1* 11.1* 13.4* 13.4* 13.4* 14.4* 14.4* 14.4* 18.6* 18.6* 18.6* 21.2* 21.2* 21.2* 19.9 21.9* 21.9* 11.2* 11.2* 11.2* 11.1* 11.1* 11.1* 10.0* 10.0* 10.0* 11.8 12.0* 12.0* 11.7 13.2* 13.2* 11.5 14.2* 14.2* 11.0 13.8 14.4 10.4 13.0 13.7 9.8 12.3 13.0 9.4 11.8 12.4 9.2 11.5 12.1 10.0* 10.0* 10.0* 12.0* 12.0* 12.0* 13.2* 13.2* 13.2* 14.2* 14.2* 14.2* 14.0 15.1* 15.1* 13.3 16.0* 16.0* 12.7 15.9 16.6* 12.2 15.3 16.4* 12.0 15.0 15.1* 8.2 9.7* 9.7* 8.2 10.2 10.7 8.1 10.1 10.6 7.8 9.8 10.3 7.5 9.4 9.9 7.2 9.0 9.5 6.9 8.7 9.1 6.8 8.5 8.9 In longitudinal position of undercarriage 9.7* 9.7* 9.7* 10.2 11.9* 11.9* 10.1 12.2* 12.2* 9.8 12.3 12.6* 9.5 11.9 13.0* 9.2 11.5 13.2* 8.9 11.1 13.0* 8.8 10.9 12.0* 6.1 7.6 7.9 6.0 7.6 7.9 5.9 7.4 7.8 5.8 7.2 7.5 5.6 7.0 7.3 5.4 6.8 7.1 5.3 6.7 7.0 7.6 8.6* 8.6* 7.6 9.5 10.7* 7.4 9.3 10.8* 7.3 9.1 10.9* 7.1 8.9 10.9* 6.9 8.7 10.5* 6.8 8.6 9.6* Max. reach 4.6 5.8 6.1 4.6 5.7 6.0 4.5 5.6 5.9 4.4 5.5 5.8 5.9 7.3 8.3* 5.8 7.2 9.2* 5.7 7.1 8.9* 5.6 7.0 8.3* 9.0* 9.0* 9.0* 7.1 8.0* 8.0* 5.7 7.2 7.5 5.0 6.2 6.5 4.5 5.6 5.9 4.3 5.3 5.6 4.1 5.2 5.4 4.1 5.2 5.5 4.6 5.8 6.1 9.0* 9.0* 9.0* 8.0* 8.0* 8.0* 7.2 7.5* 7.5* 6.2 7.3* 7.3* 5.7 7.1 7.3* 5.4 6.7 7.5* 5.3 6.6 7.8* 5.3 6.6 7.4* 5.9 7.4 7.9* 3.3 6.4 8.1 9.3 10.1 10.7 11.0 11.1 11.0 10.1 * Limited by hydr. capacity The lift capacities on the stick end without attachment are stated in metric tons (t) and are valid on a firm, level supporting surface with blocked oscillating axle. These capacities can be slewed through 360 with the undercarriage in the transverse position. Capacities in the longitudinal position of the undercarriage ( / 15 ) are specified over the steering axle with the stabilizers raised and over the rigid axle with the stabilizers down. Indicated loads based on the ISO 10567 standard and do not exceed 75 % (according to EN 474-5 in drive opera tion only 60 %) of tipping or 87 % of hydraulic capacity. The lift capacity of the unit is limited by its stability, the lifting capability of the hydraulic elements, or the maximum permissible lifting capacity of the load hook. In accordance with the harmonised European Standard EN 474-5, hydraulic excavators used for lifting operations must be equipped with pipe fracture safety valves, an overload w arning device, a load hook and a lift capacity chart. 12 LH 60 M Timber Litronic
Working Tools H0837 Wood Grab Grab model GMH 50 round-shaped (overlapping, horizontal cylinders) Size m2 2.50 Cutting width mm 870 Height of grab, closed mm 2,412 Weight kg 2,115 H0834 2.50 2,412 2,190 2.80 2,862 2,380 3.20 2,996 2,450 3.60 870 3,114 2,520 3.20 2,775 2,395 3.60 2,879 2,420 3.80 870 2,965 2,410 1.90 870 2,984 2,240 2.20 870 3,062 2,255 2.50 870 3,140 2,315 Wood Grab Grab model GMH 80 round-shaped (complete overlapping, vertical cylinders) Size m2 1.60 Cutting width mm 870 Height of grab, closed mm 2,908 Weight kg 2,195 3.60 2,813 2,390 Wood Grab Grab model GMH 50 combi-shaped (tip-to-tip closing, horizontal cylinders) Size m2 3.20 Cutting width mm 870 Height of grab, closed mm 2,775 Weight kg 2,325 H0838 3.20 2,646 2,330 Wood Grab Grab model GMH 50 heart-shaped (tip-to-tip closing, straight design, horizontal cylinders) Size m2 2.20 2.50 Cutting width mm Height of grab, closed mm 2,615 2,745 Weight kg 2,265 2,320 H0836 2.80 2,519 2,270 LH 60 M Timber Litronic 13
Equipment Undercarriage Stabilizer and dozer blade, rear Stabilizer and dozer blade, rear and front 4-wheel steering Trailer coupling Mudguards (rear and front) Shuttle axle lock, automatic Protection for oscillating axle cylinders Two lockable storage boxes Hydraulic System Electronic pump regulation Liebherr hydraulic oil from 20 C to 40 C Liebherr hydraulic oil, biologically degradable Magnetic rod in hydraulic tank Bypass filter Preheating hydraulic oil Engine Uppercarriage Railing on uppercarriage Main battery switch for electrical system Warning beacon on uppercarriage, LED Protection for counterweight (both sides) Protection for headlights Protection for uppercarriage (both sides) Protection for rear lights Tool equipment, extended Fuel anti-theft device Air pre-filter with dust discharge Preheating fuel Preheating coolant ** Preheating engine oil ** Cooling System Radiator, large-mesh, for dust-intensive operation Reversible fan drive, fully automatic Protective grid in front of cooler intake 14 LH 60 M Timber Litronic
Operator s Cab Stabilizer, proportional control on left joystick Front headlights integral protective grid, left side, halogen Front headlights integral protective grid, left side, LED Cab lights front, halogen Cab lights front, LED Left arm console, folding Armrest adjustable Slewing gear brake, rocker switch in the right joystick Driver profile, personalised (max. 5 drivers) Operator s seat Comfort Operator s seat Premium Driving alarm (acoustic signal is emitted during travel, can be switched ON / OFF) Fire extinguisher Horn, button on left joystick Joystick and wheel steering (slim version) Cab elevation, rigid (LFC) Automatic air conditioning LiDAT Plus (extended Liebherr data transfer system) * Automatic engine shut-down (time adjustable) Proportional control Radio Comfort, control via display with handsfree set Preparation for radio installation Warning beacon on cab, LED Windows made from impact-resistant laminated safety glass Windscreen wiper, roof Windshield wiper, entire windscreen Integral guard Flashing light (xenon) Attachment Boom lights, 2 pieces, LED Stick lights, 2 pieces, LED Equipped with electro-hydraulic end position control Pressure warning mechanism hoist cylinder Filter system for working tool Electronic lift limitation Boom cylinder cushioning Pipe fracture safety valves hoist cylinders Pipe fracture safety valve stick cylinder Protection for piston rods, hoist cylinder Protection for piston rods, stick cylinder Overload warning device Complete Machine Lubrication Lubrication undercarriage, manually decentralised (grease points) Central lubrication system for uppercarriage and attachment, automatically Central lubrication system for undercarriage, automatically Central lubrication system, extension for tool attachment Special coating, variants Monitoring Rear view monitoring with camera ** Side view monitoring with camera ** = Standard, = Option * = optionally extendable after one year, ** = country-dependent Options and / or special attachments, supplied by vendors other than Liebherr, are only to be installed with the knowledge and approval of Liebherr in order to retain warranty. LH 60 M Timber Litronic 15
Wide Product Range The Liebherr Group is one of the largest construction equipment manufacturers in the world. Liebherr s high-value products and services enjoy a high reputation in many other fields. The wide range includes domestic appliances, aerospace and transportation systems, machine tools and maritime cranes. State-of-the-art Technology To provide consistent, top quality products, Liebherr attaches great importance to each product area, its components and core technologies. Important modules and components are developed and manufactured in-house, for instance the entire drive and control technology for construction equipment. Exceptional Customer Benefit Every product line provides a complete range of models in many different versions. With both their technical excellence and acknowledged quality, Liebherr products offer a maximum of customer benefits in practical applications. Worldwide and Independent Hans Liebherr founded the Liebherr family company in 1949. Since that time, the enterprise has steadily grown to a group of more than 130 companies with over 4 employees located on all continents. The corporate headquarters of the Group is Liebherr-International AG in Bulle, Switzerland. The Liebherr family is the sole owner of the company. www.liebherr.com Liebherr-Hydraulikbagger GmbH Liebherrstraße 12, D-88457 Kirchdorf / Iller S 49 7354 80-0, Fax 49 7354 80-72 94 www.liebherr.com, E-Mail: info.lhb@liebherr.com www.facebook.com/liebherrconstruction RG-BK LHB/VF 12206231-web-08.16_enGB All illustrations and data may differ from standard equipment. Subject to change without notice. The Liebherr Group of Companies