HIAB 166 E-3 Duo

HIAB 166 DUO CE-marked. Crane base The HIAB 166 has a base with 3 point bridge, suitable for truck mounting. It is provided with a single slewing system of rack/pinion type, which is running in an oil bath. The slewing stop position is placed

frontward and the crane has a full working area of 410. Stabilisers On the left-hand side the crane is equipped with a hydraulically operated, long stabiliser extension, providing a spread of 2.75 m / 9' 0" from the frame centre, including HP hoses and connections. A medium, double acting stabiliser leg is fitted fixed to the extension. On the right-hand side the crane is equipped with a hydraulically operated, long stabiliser extension, providing a spread of 2.75 m / 9' 0" from the frame centre, including HP hoses and connections. A medium, double acting stabiliser leg is fitted fixed to the extension. Additional options: Steel swivelling stabiliser leg plates of ball and socket type. Boom The crane has a foldable boom system with medium first boom, a first and second boom link and 3 hydraulic extensions, providing an outreach from 4,6 metres / 15' 1'' to 10,5 metres / 34' 5''. The extension system has an optimal cylinder layout regarding the crane dimensions in parked position.. There is a hook attachment at the last extension. ] Hydraulic system All cylinders on this crane are double acting and all crane functions have load holding valves. The main control valve of the crane is a 6-function Parker V-80H for manual control. The levers on the valve are protected with a safety guard. The crane stabilisers will be operated from a separate valve, So an additional valve for 4 functions is mounted. Additional options:. Hydraulic couplings according to ISO 8434 (Jic). Control system The crane is manually controlled by a set of levers at both sides of the crane. The levers are crossconnected to maintain the same function sequence. The stabiliser functions are controlled by levers directely attached to the valve for the stabiliser leg function and by levers that are cable connected to the valve for the extensions functions. Additional options:. Electronics & power supply The crane is equipped with SPACE 3000 including OLP overload protection, warning at 90% of max load, protection from operating the outrigger legs on 5th and 6th function when loaded, start and stop button, electronic cut out function after 30 minutes without touching the levers, ADO (Automatic Dumping of Oil) and height warning for raised inner boom. Continuous supervision of stabilser extension plus stabiliser Leg down. Additional options: warning lamps on stabilisers, Height warning kit to warn the driver that the crane boom is not parked satisfactory. The kit includes a reset button with a lamp and buzzer for mounting in the truck panel, Stabiliser warning kit to warn the driver that the stabilisers extension are not locked (in). The kit delivers a signal that can be connected to a warning device (not included). Additional items The following items will be delivered to the crane: A 100 litre ( 26.4 Gal) oil tank for separate installation. Including built-in return oil filter with indicator, air breather, filler strainer, oil level indicator, drainage tap for taping condensation water and a tank fitting kit EMC-approved air oil cooler with built in by-pass valve. Equipped with electronic soft start for eliminating a voltage drop in the electrical system when it starts up. Includes thermostat, relay and fuse. (24 Volts / 8,75 Ampere.) Complete frame attachment kit of type, bolt on, offering a grip of 0 to 523 mm (0 to 20 9/16"). The kit consists of 6 stud bolts M30, length 950 mm (37 3/8"). Two 35 mm (1 3/8") thick clampon washers, and other necessary hardware Operator's manual in Czech Version M dyn Lifting capacity Lifting capacity Lifting capacity (ADC) Lifting capacity (ADC) HIAB 166 E-3 Duo 204 knm 137 knm 14.0 tm 146 knm 14.9 tm

Outreach - lifting capacity, standard Outreach - lifting capacity, manual extensions Hydraulic outreach, standard Hydraulic boom extension Outreach, manual extensions Lifting height above installation level, hydr/man Rec. oil flow Working pressure Oil in tank Tank capacity 2.4 m - 6,000 kg 4.5 m - 3,300 kg 6.3 m - 2,300 kg 8.3 m - 1,720 kg 10.3 m - 1,380 kg 10.5 m 5.9 m 17.4 m 12.9 / 19.8 m 45-55 l/min 28.4 Mpa Slewing angle 406 Max slope viable at full capacity 5 Slewing torque, gross Slewing speed 80 Lifting speed at standard hydraulic outreach Height in folded position Width in folded position Install space required. Rotation area not included Install space required with hose and pipe kit Weight Crane in standard version without support legs Top seat Frame attachments Support leg equipment Data sheet HIAB 166 E-3 Duo 100 l 120 l 21.6 knm 15 /s 1.6 m/s 2,232 mm 2,500 mm 966 mm 966 mm 2,030 kg 0 kg 40-65 kg 254-391 kg