HIGH VOLTGE THIK FILM HIP FIXED RESISTOR 3000V Max Operating voltage 3000V Stable electrical capability, high reliability Superior mechanical and frequency characteristics ROHS ompliant with RoHS directive Halogen free requirement amera Flash ircuit, omputer, Printer, attery harger, utomotive, Power supply, D-ROM etc. RV S 06 L 4 F T Product ode High Voltage Thick Film hip Fixed Resistor Power Rating Series ode 2 20 ode S ode ode 02 03 05 06 2 2 20 2 ode 2 20 T..R ode K L M T..R (ppm/ ) W 200 U K À400 500 Resistance Value ode 3 digit or 4 digit 6=M 5=M Resistance Tolerance ode ode F J K Tolerance % 5% % Packaging Style ode ode T Packaging Style Tape & Reel ase eramic Substrate ottom Electrode Top Electrode Resistor Layer Primary Overcoat Secondary Overcoat Edge Electrode arrier Layer External Electrode
Dimensions(mm) L W t a b.00 0.05 0.50 0.05 0.35 0.05 0.20 0. 0.20 0..60 0.5 0.80 0.5 0.40 0. 0.30 0.20 0.30 0.20 2.00 0.20.25 0.5 0.50 0. 0.30 0.20 0.40 0.20 3.20 0.20.60 0.5 0.55 0. 0.50 0.20 0.50 0.20 2 3.20 0.20 2.50 0.20 0.55 0. 0.50 0.20 0.50 0.20 20 5.00 0.20 2.50 0.20 0.55 0. 0.60 0.20 0.60 0.20 6.40 0.20 3.20 0.20 0.55 0. 0.60 0.20 0.60 0.20-55 70 Percent Rated Load 75 50 25 Operating Temperature Range: -55 ~25 0-75 -50-25 0 25 50 75 25 55 mbient temperature ( 70 ( ) Note: For resistors operated in ambient over 70,rated load (rated power) shall be derated in accordance with the above figure. 70 Rating Power at 70 (W) /6 / /8 /4 /3 3 /4 Max. Overload Voltage (V) Limiting Element Voltage (V) 200 2 20 Note: Voltage of D or RMS value. 2 E= P R E= P R or Limiting element voltage whichever is lower. E Rated voltage(v) P Rated power(w) R Normal resistance( ) 300 400 500 600 2000 3000 600 800 0 200 3000 4000 2 20 Resistance Range % 39K R M.02M R 20M 200 22M R M 400 25K R M M <R M 80K R M M <R M 60K R M M <R M 20K R M M <R M 54K R M M <R M 40K R M M <R M 2 T..R (ppm/ ) Resistance Tolerance 5% % 200 200 400 400
HIGH VOLTGE THIK FILM HIP FIXED RESISTOR Item Solderability Resistance to Soldering Heat Substrate ending Test Shear Test T..R Rapid hange of Temperature Short Time Overload Specifications 95% 95% over Min R (.0%R+0.05 ) R (.0%R+0.05 ) Within specified T..R R (.0%R+0.05 ) R (5.0%R+0.05 ) (IE605-) Test Methods (IE605-) IE 605-4.7 245 5 3s 0.3s Lead-free solder bath at 245 5 for 3s 0.3s IE 605-4.8 270 5 s s Lead-free solder bath at 270 5 for s s IE 605-4.33 (ending distance) :5mm ; 2 4mm 20 2mm (Duration) 60s 5s IE 605-4.32 (pplying force) 5N; 9N; 2 25N; 20 45N. (Duration) s s. IE 605-4.8 +20 /-55 /+20 /+25 /+20 IE 605-4.9 2 20-55 (30 ) (5 ) 25 (30 ) 300 2 20-55 (30min) normal temperature(5min) 25 (30min) 300 cycles. IE 605-4.3 2.5 ( ) 5 2.5 times rated voltage or max. overload voltage whichever is lower for 5s. Damp Heat Steady State 70 Endurance at 70 Endurance at Upper ategory Temperature Insulation Resistance omponent Solvent Resistance R (3.0%R+0.05 ) R (3.0%R 0.05 ) R (2.0%R 0.05 ) 0M Min R (.0%R+0.05 ) IE 605-4.24 40 2 93% 3%RH 0h. IE 605-4.25. 70 2 0 ( ).5 / 0.5 70 2 0h rated voltage or limiting element voltage whichever is lower for.5h ON/0.5h OFF. IE 605-4.25.3 2 20 25 2 0h. IE 605-4.6 V 5V. pply D V 5V between substrate and terminations for min, then check insulation resistance. IE 605-4.29 (IP) 23 5 Iso-propyl alcohol (IP) 23 5 h. 83 90 Packaging see the 83-90 Page. 3
PKGING ND PREUTION OF HIP RESISTOR hip fixed resistor 05 020 2 20 Thick Film Resistor and Thin Film Resistor 0.7 0.23 0.45 0.80.05.90 2.00 3.50 4.80 0.60 0.84.45 2.50 3.25 4.50 4.60 6.50 7.80 0.22 0.38 0.60 0.95.40.75 2.70 2.70 3.40 20 Metal Foil Resistor R003~R004 R005~R030 R003~R004 R005~R047 R003~R004 R005~R068 R003~R009 R0~R R002~R004 R005~R200 0.4 0.6 0.5 0.8 0.8.8.6 2.7.0 3.8 2.8 3.2 4.4 6.3 8.0.0.4.8 2.9 3.4 Thick film chip network resistor Q Q2 Q3 Q2 Q3 Q2 Q RMY08 / RMT08 / RML08 Q Q2 Q3 RMY08 0.30 0.90 0.20 0.20 0.20 RMT08 0.38.60 0.40 0.20 0.30 RML08 0.80 2.70 0.60 0.40 0.40 83
Paper Taping 05 020 RMY08 RMT08 For 05 020 RMY08 RMT08 W F E 05 020 0.45 0.70.20 0.02 0. 0. 0.25 0.40 0.70 0.02 0. 0. 8.00 8.00 8.00 0.02 0.20 0.20 3.50 3.50 3.50 0.05 0.05 0.05.75.75.75 0.05 0. 0. RMY08.57 0.05 0.77 0.05 8.00 0.20 3.50 0.05.75 0. RMT08 2.20 0..20 0. 8.00 0.20 3.50 0.05.75 0. 05 020 P P0 D0 T T P.55 0.02.50 0..50 0. 0.7 0.02 0.28 0.04 / 0.3 0.02 0.42 0.05 0.42 0.05 RMY08.50 0. / 0.60 0. RMT08 2.00 0..50 0. / 0.60 0. 2 RML08: For 2 RML08: 84
PKGING ND PREUTION OF HIP RESISTOR W F E.85 0.. 0. 8.00 0.20 3.50 0.05.75 0. 2.35 0..65 0. 8.00 0.20 3.50 0.05.75 0. 3.50 0.20.90 0.20 8.00 0.20 3.50 0.05.75 0. 2 3.50 0.20 2.80 0.20 8.00 0.20 3.50 0.05.75 0. RML08 3.50 0.20.90 0.20 8.00 0.20 3.50 0.05.75 0. P P0 P.50 0. 0.60 0. D0 Thick Film Resistor and Thin Film Resistor T Metal Foil Resistor 0.75 0..50 0. 0.75 0. 0.95 0..50 0. 0.75 0. 0.95 0. 2.50 0. 0.75 0. RML08.50 0. 0.75 0. 20 For 20 Embossed Taping 0 0 W F E t 20 5.50 0.5 2.82 0.5 2.00 0. 5.50 0..75 0. 0.25 0.05 6.78 0.5 3.45 0.5 2.00 0. 5.50 0..75 0. 0.25 0.05 P P0 P D0 D Thick Film Resistor and Thin Film Resistor K0 Metal Foil Resistor 20.50+0./-0.50 0. 0.84 0. 0.84 0..50+0./-0.50 0. 0.8 0..00 0. 85
Reel 05 020 2 RMY08 RMT08 RML08 20 M W T D 78 2.0 9.5.0 2.5.5 2.0 0.5 3.0 0.5 2.0 0.5 58.0 2.0 78 2.0 3.0 0.5 5.5.5 2.0 0.5 3.0 0.5 2.0 0.5 57.0 2.0 Packaging Quantity Packaging style Tape & reel ase 05 020 RMY08 RMT08 2 RML08 20 05 020 RMY08 RMT08 RML08 2 20 Quantity(pcs) 20000 00 5000 4000 50000 00 4000 n E-24 E-24 series( ) ( unit 0.00 0.0 0. k k k M M M 0M ).0.5 2.2 3.3 4.7 6.8..6 2.4 3.6 5. 7.5.2.8 2.7 3.9 5.6 8.2.3 2.0 3.0 4.3 6.2 9. 86
PKGING ND PREUTION OF HIP RESISTOR n E-96 E-96 series ( ) ( unit 0.00 0.0 0. k k k M M M 0M ).00.02.05.33.37.40.78.82.87 2.37 2.43 2.49 3.6 3.24 3.32 4.22 4.32 4.42 5.62 5.76 5.90 7.50 7.68 7.87.07..43.47.9.96 2.55 2.6 3.40 3.48 4.53 4.64 6.04 6.9 8.06 8.25.3.50 2.00 2.67 3.57 4.75 6.34 8.45.5.54 2.05 2.74 3.65 4.87 6.49 8.66.8.58 2. 2.80 3.74 4.99 6.65 8.87.2.24.62.65 2.5 2.2 2.87 2.94 3.83 3.92 5. 5.23 6.8 6.98 9.09 9.3.27.69 2.26 3.0 4.02 5.36 7.5 9.53.30.74 2.32 3.09 4.2 5.49 7.32 9.76 E 96 E-96 series() multiplied ross-reference List and Resistance ross-reference List multiplied code 0 2 3 D 4 E 5 F 6 G 7 H - X -2 Y -3 Z ode E-96 E-96 resistance ode E-96 E-96 resistance ode E-96 E-96 resistance ode E-96 E-96 resistance 0 25 78 49 36 73 562 02 2 26 82 50 324 74 576 03 5 27 87 5 332 75 590 04 7 28 9 52 340 76 604 05 29 96 53 348 77 69 06 3 30 200 54 357 78 634 07 5 3 205 55 365 79 649 08 8 32 2 56 374 80 665 09 2 33 25 57 383 8 68 24 34 22 58 392 82 698 27 35 226 59 402 83 75 2 30 36 232 60 42 84 732 3 33 37 237 6 422 85 750 4 37 38 243 62 432 86 768 5 40 39 249 63 442 87 787 6 43 40 255 64 453 88 806 7 47 4 26 65 464 89 825 8 50 42 267 66 475 90 845 9 54 43 274 67 487 9 866 20 58 44 280 68 499 92 887 2 62 45 287 69 5 93 909 22 65 46 294 70 523 94 93 23 69 47 30 7 536 95 953 24 74 48 309 72 549 96 976 87
Description for Resistance Value ode and Marking of Thick Film hip Resistor Resistance Value ode ll the resistance value code of thick film chip resistor is corresponding with the marking. Marking E-24 ( 5%) E-24 series: Express resistance value on the glass side with three digits, the first tow digits should be significant and the third one denote number of zeros. K 33 E-24 ( %& 0.5%) E-24 series( %& 0.5%): One short bar under marking letter. E-96 E24 %& 0.5% 2 20 4R02 4R03 E-96 series & E-24 series:for the dimension type of 2 20 4R02 4R03 express the resistance value with four digits, the first three digits are significant figures and the fourth de notes the number of zeros. K 33 E-96 E-96 For the dimension type of, express the resistance value with three code, the first two digit code denote the resistance of E-96 series, and the third code of letter denote the multiplier (see the table three and four ). 2M R The decimal point should be expressed by R. 5.6 0 The jumper should be expressed by 0 0 05 020 For the dimension type of 05 020 there is no mark on the glass side. IE IE E24 For the resistance which don't belong to IE serial, use the resistance of IE serial which is most close to the required resistance of non-ie serial for replacement. To get agreement by both party if there special requirement for the marking. 88
PKGING ND PREUTION OF HIP RESISTOR Description for Resistance Value ode and Marking of Thin Film hip Resistor Resistance Value ode 020 2 20 ll resistance value code of thin film chip resistor,including 020 2 20 size used four digits. Marking TD03G470T 470=4.7K R50=.5 To use four digits code represent resistance value, 470=4.7K R50=.5 E24 E96 E96. When resistance value belongs to E24 as well as E96 series, we suggest preferentially use E96 series. K=2, 3 2 20 Marking for 2 20 Size Resistor 2 20 For 2 20 size resistor, express the resistance value with four digits code; K Marking for Size Resistor -E96 For resistance value belongs to E96 series, express the resistance value with three digits code. 2M -E24 For resistance value belongs to E24 series, express the resistance value with three digits code. K The decimal point should be expressed by "R". 5.6 020 For the dimension type of 020 there is no mark on the glass side. 89
2 3 4 5 6 7 Use in various types of liquid, including water, oils, chemicals, and organic solvents. 2 Use outdoors where the products are exposed to direct sunlight, or in dusty places. 3 Use in places where the products are exposed to sea winds or corrosive gases, including l2, H2S, Nh3, SO2, and No2 etc. 4 Use in places where the products are exposed to static electricity or electromagnetic waves. 5 Use in proximity to heat-producing components, plastic cords, or other flammable items. 6 Use involving sealing or coating the products with resin or other coating materials. 7 Use involving unclean solder or use of water or water-soluble cleaning agents for cleaning after soldering. 2 3 4 : 5 30 30% 70% void applying power exceeding normal rated power, exceeding the power rating under steady-state loading condition may negatively affect product performance and reliability. 2 e careful when pick up the products with tweezers. There may be a care that the overcoat and / or the body can be chipped. 3 Soldering tip shall not touch the product when install product manually. 4 Storage conditions: T 5 30, RH 30% 70%. Recommended wave solder profile Recommended reflow profile Recommended solder alloy 96.5Sn/3.0g/0.5u 90