KoolAir PM500 Marine Coolant Pump Fully Submersible Pump Features: n Pumps 500 gallons/hr n Run Dry and Thermal Overload Protection n In a Run Dry scenario, the pump will shut down. Simply let it cool down or hose it down to assist n 115V & 230V n One Phase, all cords are six feet in length and are U.L. LISTED 18/3 wire n The pump is not self-priming and requires a flooded suction Run Dry Protection to Keep You Cool The PM500 is a magnetically driven pump with no shaft seal. The pump is epoxy encapsulated, which allows the PM pump to run fully submerged in many liquids or in open air for complete moisture protection. When re-assembling the pump for service, make sure all O rings are properly seated. See the repair parts list for a breakdown of replacement parts. Webasto is the North American exclusive distributor of KoolAir Pumps to the marine industry.
Technical Specifications PM500 115 5011370A Webasto Part # 230 5011371A 50Hz lpm 31 60Hz gpm 8.5 50Hz m 4.3 60Hz ft (psi) 19 (8.2) Inlet 3.4 FPT Outlet 1/2 MPT psi 25 Maximum Internal Pressure bar 1.7 F 130 Maximum Liquid Temp. C 54 Packed Wieght kg / lbs 3.85 / 8.5 Motor Type TE / SUB 115V 60Hz 230V 50/60Hz Phase 1 Watts 100 50Hz Amps 1.0 Kw 0.037 Rpm 2850 Watts 120 / 120 60Hz Amps 2.0 / 1.0 Hp 1/20 Rpm 3450 Electrical Connection Cord Overall Pump Dim. (LxWxH) 7.50 x 4.80 x 4.87in 19 x 12.2 x 12.3cm *All specifications and flow curves are based on pumping water Warranty: KoolAir Pumps are guaranteed only against defects in workmanship or materials for a period of two years from date of manufacture while pumping water. Parts List Item Description Material Dimensions (LxW) 1 Screw Stainless Steel 37 x 5mm 2 Front Cover Reinforced PP 24.3mm 3 O-Ring Silicon 68.4 x 2.6mm 4 Wash & Shaft Ceramic 5 Impeller Polysulfone FDA Plastic 59mm 6 Rear Housing Stainless Steel 10.15 x 10.15mm 7 O-Ring Rubber 72 x 2.5mm 8 Screw Stainless Steel 12 x 5mm 9 Driver Magnet & Epoxy Motor Ferrite Ceramic 10 Freeze Plug Reinforced PP 5.93mm A Base Reinforced PP 123.12 x 65mm B Optional Base Reinforced PP 81.28 x 107.95mm 11 Grommet Rubber 6 x 10.5mm Manufacturer s Edge KoolAir Pumps 5044 Industrial Rd. Suite C Farmingdale, NJ 07727 USA Toll Free: 800-810-1053 Email: info@koolair.com www.koolairpump.com Webasto Thermo & Comfort North America, Inc. 15083 North Road Fenton, Michigan 48430 USA Toll Free: 800-860-7866 Phone: 810-593-6000 www.webasto.us
KoolAir PM1000 Marine Coolant Pump Pump Features: n Pumps 1,000 gallons/hr n Run Dry and Thermal Overload Protection n 115V & 230V n One Phase, all cords are 56 in length and are U.L. LISTED 18/3 wire n Motors are rated as; continuous duty n The pump is not self-priming and requires a flooded suction Run Dry Protection to Keep You Cool The PM1000 is a magnetically driven pump with no shaft seal and the motor is Open Drop Proof (ODP). The hardened Carbon bushing allows for extended run dry time without any damage to the pump head. See the parts diagram for assembly instructions. Impeller may be trimmed to modify flows or compensate for liquids of higher viscosity. For application assistance, please contact KoolAir Pumps at 800-810-1053. Webasto is the North American exclusive distributor of KoolAir Pumps to the marine industry.
Technical Specifications PM1000 115V 5011372A Webasto Part # 230V 5011373A 50Hz lpm 54.8 60Hz gpm 17.2 50Hz m 6 60Hz ft (psi) 27 (11.7) Inlet 1 FPT Outlet 1/2 MPT psi 50 Maximum Internal Pressure bar 3.4 F 130 Maximum Liquid Temp. C 54 Packed Wieght kg / lbs 8.02 / 17.70 Motor Type O.D.P. 115V 60Hz 230V 50/60Hz Phase 1 Watts 147 50Hz Amps 1.2 Kw 0.093 Rpm 2850 Watts 216 / 207 60Hz Amps 1.6 / 0.9 Kw 1/8 Rpm 3450 Electrical Connection 56 Cord Overall Pump Dim. (LxWxH) 9.25 x 4.37 x 6.18in 23.5 x 11.10 x 15.70cm 4.50 9.25 1.30 1.50 OUTLET 1/2 (14MPT) CARBON BUSHING 6.18 2.45 56 CORD 4 SLOTS.53 TYP. NYLON 3.39 4.37 5.40 3.14 *All specifications and flow curves are based on pumping water Warranty: KoolAir Pumps are guaranteed only against defects in workmanship or materials for a period of two years from date of manufacture while pumping water. Parts List Item Description Material Dimensions (LxW) 1 Screw Stainless Steel 4 x 45mm 2 Front Cover Reinforced PA6 O.D. - 102.8mm I.D. - 30mm 3 O-Ring Rubber 77 x 1.8mm 4 Wash & Shaft Ceramic 63.7 x 6.33mm 5 Impeller Inside - Carbon Bush Outside - Reinforced PA6 Diameter - 40 x 61.5mm 6 Rear Housing Reinforced PA66 102.3 x 61.5mm 7 Driver Magnet Magnet, Reinforced PA66 8 Bracket Reinforced PA66 9 Motor Manufacturer s Edge KoolAir Pumps 5044 Industrial Rd. Suite C Farmingdale, NJ 07727 USA Toll Free: 800-810-1053 Email: info@koolair.com www.koolairpump.com Webasto Thermo & Comfort North America, Inc. 15083 North Road Fenton, Michigan 48430 USA Toll Free: 800-860-7866 Phone: 810-593-6000 www.webasto.us
KoolAir TPM1000 Marine Coolant Pump Pump Features: n Pumps 1,000 gallons/hr n Run Dry and Thermal Overload Protection n 115V & 230V (Dual Voltage Motor) n One Phase, all cords are 56 in length and are U.L. LISTED 18/3 wire n Motors are rated as; continuous duty n The pump is not self-priming and requires a flooded suction Run Dry Protection to Keep You Cool The TPM1000 is a magnetically driven pump with no shaft seal and the motor is Totally Enclosed, Fan Cooled (TEFC). The hardened Carbon bushing allows for extended run dry time without any damage to the pump head. See the parts diagram for assembly instructions. Impeller may be trimmed to modify flows or compensate for liquids of higher viscosity. For application assistance, please contact KoolAir Pumps at 800-810-1053. Webasto is the North American exclusive distributor of KoolAir Pumps to the marine industry.
6 KAT1000-26 Rear Housing Reinforced PP 10.23 102.3 6.15 61.5 7 KAT1000-27 Driver Magnet Magnet, Reinforced PP 8 KAT1000-28 Bracket Reinforced PP 9 KAT1000-29 Motor Technical Specifications O.D = 102.8mm Webasto Part # Inlet Outlet Maximum Internal Pressure Maximum Liquid Temp. TPM1000 5011374A 50Hz lpm 54.8 60Hz gpm 17.2 50Hz m 6 60Hz ft (psi) 27 (11.7) 1 FPT 1/2 MPT psi 50 bar 3.4 F 130 C 54 Packed Wieght kg / lbs 8.02 / 17.70 Motor Type TEFC 115V / 230V 50/60Hz Phase 1 50Hz 60Hz Electrical Connection Overall Pump Dim. (LxWxH) Watts 147 Amps 1.2 Kw 0.093 Rpm 2850 Watts 216 / 207 Amps 1.6 / 0.9 Kw 1/8 Rpm 3450 56 Cord 9.25 x 4.37 x 6.18in 23.5 x 11.10 x 15.70cm TPM1000 6.625 2.45 1.30 4.50 3.39 4.37 800-810-1053 CARBON BUSHING 1.50 NYLON OUTLET 1/2 (14MPT) *All specifications 2 KAT1000-22 and flow Front curves Cover are based Reinforced on PPpumping 10.2 water Warranty: 6 KAT1000-26 Rear Housing Reinforced PP 10.23 102.3 6.15 61.5 7 KAT1000-27 Driver Magnet Magnet, Reinforced PP KoolAir Pumps 8 KAT1000-28 are guaranteed Bracket only Reinforced against PP defects in workmanship 9 KAT1000-29 Motor or materials for a period of two years from date of manufacture O.D = 102.8mm while pumping water. 800-810-1053 TPM1000 5.40 PARTS LIST PART ITEM NUMBER DESCRIPTION MATERIAL LENGTH WIDTH cm mm cm mm 1 KAT1000-21 Screw Stainless Steel 0.4 4 4.5 45 8 3 KAT1000-23 O-Ring Rubber 7.7 77 0.18 1.8 4 KAT1000-24 Washer & Shaft Ceramic 6.37 63.7 0.633 6.33 5 KAT1000-25 Impeller Interior-Carbon Bush, Exterior-Reinforced PP 11.75 7.5 75 4.8 48 3.14 Parts List 4.50 11.75 Item Description Material Dimensions (LxW) 1 Screw Stainless Steel 4 x 45mm 2 Front Cover Reinforced PA6 O.D. - 102.8mm I.D. - 30mm 3 O-Ring Rubber 77 x 1.8mm 4 Wash & Shaft Ceramic 63.7 x 6.33mm 5 Impeller Inside - Carbon Bush Outside - Reinforced PA6 Diameter - 40 x 61.5mm 6 Rear Housing Reinforced PA66 102.3 x 61.5mm 7 Driver Magnet Magnet, Reinforced PA66 8 Bracket Reinforced PA66 9 Motor 6.625 1.30 2.45 3.39 4.37 800-810-1053 CARBON BUSHING 1.50 NYLON OUTLET 1/2 (14MPT) 5.40 KOOLAIR PUMPS MANUFACTURER S EDGE 5044 INDUSTRIAL RD, SUITE C FARMINGDALE, NJ 07727 3.14 Manufacturer s Edge KoolAir Pumps 5044 Industrial Rd. Suite C Farmingdale, NJ 07727 USA Toll Free: 800-810-1053 Email: info@koolair.com www.koolairpump.com Webasto Thermo & Comfort North America, Inc. 15083 North Road Fenton, Michigan 48430 USA Toll Free: 800-860-7866 Phone: 810-593-6000 www.webasto.us