C INLETS & OUTLETS IEC 30 & MINI IEC CONNECTORS INTRODUCTION: dam Tech IEC & Mini IEC Series C Inlets and Outlets are primary power receptacles designed, manufactured, tested and approved to UL, CS, VDE and other applicable international specifications including IEC-6030 and CEE-. dam Tech offers a wide variety of body styles, shapes and orientations to accommodate most class I & II applications with two or three blade contacts in both IEC and Mini-IEC configurations. Mounting choices include screw holes and snap-in versions and four termination styles. Options of ganged ports or receptacle with integral fuse holder are also available. FETURES: IEC & Mini-IEC types IEC-6030, CEE- Compliant UL, CS and VDE approved Multitude of Body Styles Choice of terminations Option of Integral Fuse Holder MTING CONNECTORS: dam Tech PC series power cords and all standard international IEC 6030 power supply cords. SPECIFICTIONS: Material: Insulator: Polycarbonate or Nylon 66, glass filled, rated UL94V-0 Insulator Color: Black Contacts: Phosphor Bronze or Brass Plating: Nickel over copper underplate. (Solder terminals: Tin over copper underplate) Electrical: Operating Voltage: 50V C Current Rating: IEC - UL & CS: 5 mps Max, VDE: 0 mps Max. Mini IEC - UL, CS & VDE.5 mps Max. Insulation Resistance: 00 MΩ Min. @ 500V DC Dielectric Withstanding Voltage: 000V C for Minute Temperature Rating: Operation Temperature: -5 C ~ +70 C PCKGING: nti-esd plastic trays SFETY GENCY PPROVLS: UL Recognized File Nos. E405, E405 ENEC pproved European Norm Electrical Certification IEC SERIES INDICTOR IEC = International inlet/outlet BODY STYLE B C D E F G HS HR J N NB NB- NC NC- ND NF NH NH- GS FS M N ORDERING INFORMTION TERMINLS =.87" Quickconnect terminals =.50" Quickconnect terminals 3 = Solder terminals.57" [4.0mm] 4 = Right ngle PCB mount 5 = Solder Terminals.098" [.5mm] 50 PNEL THICKNESS (for body styles C, D & J only) Blank = Universal Snap 080 = 0.8mm Panel 0 =.mm Panel 50 =.5mm Panel 00 =.0mm Panel 300 = 3.0mm Panel = Male Inlet, Screw-on panel mount = Female Outlet, Screw-on panel mount = Male Inlet, Snap-in panel mount = Female Outlet, Snap-in panel mount = Male Inlet, Right ngle PC board mount with mounting flange (Specify EW, EX, EY or EZ) = Male Inlet, Screw on panel mount with 5 x 0mm fuse holder = Male Inlet, Snap-in panel mount with 5 x 0mm fuse holder = Inlet/Outlet, snap-in panel mount = Inlet/outlet, snap-in panel mount, right angle PCB mount = Male inlet, right angle PCB & tail with snap-in panel mounting = Mini-IEC right angle, snap-in = Mini-IEC right angle, slide-in = Mini-IEC right angle, slide-in with pegs = Mini-IEC right angle, with flush flange = Mini-IEC right angle, with extended face = Mini-IEC right angle, with enclosed body = Mini-IEC right angle, polarized with flange = Mini-IEC right angle, with ground pin = Mini-IEC right angle, flange mount with ground pin = Fused inlet with switch snap in panel mount = Fused inlet with switch screw on panel mount = Female outlet, 0 MP, Flanged = Male inlet, 0 MP, Snap-In OPTIONS: K = Keyed for 0 C (Body Styles, C, E & J) www.adam-tech.com 9
C INLETS & OUTLETS IEC- SCREW ON PNEL MOUNT.969 [50.00].575 [40.00].05 [30.60].748 [9.00] IEC--.886 [.50].756 [9.0].075 [7.30] Front Mounting. [30.80] Rear Mounting M or ø.38 R.38.764 [9.40].575 [40.00].055 [6.80].87.87 Q.C. Q.C. TERMINL TERMINL OPTIONS OPTIONS 3 3 4 5.50.50 Q.C. Q.C..098.57 Solder Solder.57.098 Solder Solder IEC- SCREW ON PNEL RIGHT NGLE PCB MOUNT.968 [50.00].575 [40.00].05 [30.60].748 [9.00] IEC--4.886 [.50].55 [4.00].049 x.03 [.5 x 0.80].03 [0.80].6 [3.0] M OR ø.40 Rear Panel Mounting R.97 [5.00].898 [.80].75 [7.00] ø.07 [.80]. [30.80].574 [4.00] M OR ø.40 Front Panel Mounting R.37.764 [9.40].055 [6.80].574 [40.00] 30 www.adam-tech.com
C INLETS & OUTLETS.0 [3.00].80 [0.80] IEC-C UNIVERSL PNEL SNP.783 [9.90] IEC-C-.756 [9.0].05 [6.70] R.098 [.50] X PNEL THICKNESS.03-.039 [0.8-.0].039-.059 [.0-.5].079-.9 [.0-3.0] DIM X.780 [9.8].784 [9.9].788 [0.0].03 [0.80] Panel Thickness: 0.8mm - 3.0mm.043 [6.50] TERMINL OPTIONS 3 5.87 Q.C..50 Q.C..57 Solder.098 Solder.0 [3.00].80 [0.80] IEC-C DEDICTED PNEL SNP.7 [6.90].775 [9.70] IEC-C--50 "".756 [9.0].047 [6.60] PNEL THICKNESS 0.8mm PRT NUMBER IEC-C-X-080 DIM "".03 [0.80].03 [0.80].043 [6.50] R.098 [.50].783 [9.90].5mm IEC-C-X-50 3.0mm IEC-C-X-300 4.0mm IEC-C-X-400 Replace X with terminal option below TERMINL OPTIONS.059 [.50].57 [4.00] 3 5.87 Q.C..50 Q.C..57 Solder.098 Solder www.adam-tech.com 3
C INLETS & OUTLETS.0 [3.00].748 [9.00] IEC-J UNIVERSL PNEL SNP RIGHT NGLE PCB MOUNT.6 [3.0].049 x.03 [.5 x 0.80].55 [4.00].764 [9.40] IEC-J-4.87 [.00].05 [6.70].043 [6.50].75 Ø.07 [7.00] [.80] PCB Layout R.098 [.50].803 [0.40] Panel Thickness: 0.80-3.0mm.0 [3.00] IEC-J DEDICTED PNEL SNP RIGHT NGLE PCB MOUNT.7 [6.90].6 [3.0].049 x.03 [.5 x 0.80].55 [4.00].03 [0.80] IEC-J-4-50 "".756 [9.0].043 [6.50].059 [.50] PNEL THICKNESS 0.8mm PRT NUMBER IEC-J-4-0 DIM "".047 [.0].75 [7.00] Ø.07 [.80].05 [6.70].803 [0.40].5mm 3.0mm IEC-J-4-50 IEC-J-4-00.059 [.50].079 [.00] PCB Layout 4.0mm IEC-J-4-300 3 www.adam-tech.com
C INLETS & OUTLETS IEC-E FLNGED RIGHT NGLE PCB MOUNT.968 [50.00].575 [40.00].866 [.00].669 [7.00] BODY STYLE "E".094 [7.80].886 [.50] IEC-EW-4.575 [40.00] Ø.34 [3.40] W.00 [30.50].50 [3.90].50 x.063 [3.80 x.60] ø.37 W ø.059 [.50] Ø.34 [3.40]. [30.80] R.97 [5.00].898 [.80] PNEL Panel CUT-OUT Cut-Out.354 [9.00].748 [9.00] F DIMENSIONL.079 [.00] ø.34 [3.40].575 [40.00] PCB LYOUT PRT NO. IEC-EW IEC-EX IEC-EY F.87 [7.30].87 [7.30].38 [9.70] W.76 [7.00].358 [9.0].76 [7.00] IEC-EZ.38 [9.70].358 [9.0] IEC-B FLNGED SCREW ON PNEL MOUNT BODY STYLE "B".968 [50.00].574 [40.00].56 [6.50].6 [3.0].65 [9.60] ø.6 [3.0] IEC-B-.79 [3.50] R.57 [4.00].964 [4.50].787 [0.00].34 [34.00].70 [8.30].574 [40.00] PNEL CUT-OUT TERMINL OPTIONS.60 [3.00] Cross Section.87 Q.C..50 Q.C. 3.57 Solder www.adam-tech.com 33
C INLETS & OUTLETS.8 [30.00] IEC-D BODY STYLE UNIVERSL "C" PNEL SNP.083 [7.50].964 [4.50] IEC-D-.905 [3.00].787 [0.00].80 [3.50].043 [6.50].70 [8.30] R.098 [.50].004 [5.00] RECOMMENDED Panel PNEL Thickness: THICKNESS: 0.80mm - 3.0mm 0.8mm - 3.0mm.7 [3.30] Cross Section TERMINL OPTIONS 3.87 Q.C..50 Q.C..57 Solder Ø.50 [3.80]. [8.50].85 [0.70].97 [5.00] IEC-F FUSED, SCREW ON PNEL MOUNT.8 [3.0].99 [33.00] IEC-F-.47 [36.00].083 [7.50].47 [36.00].079 [.00].0 [3.00].669 [7.00].40 [3.50].953 [4.0].874 [.0] Ø.50 [3.80] TERMINL OPTIONS.87 Q.C..50 Q.C. Cross Section 34 www.adam-tech.com
C INLETS & OUTLETS. [8.50].97 [5.00].89 [0.80] IEC-G FUSED WITH UNIVERSL PNEL SNP.3 [3.0].99 [33.00] IEC-G-.8 [30.00].079 [.00].878 [.30].699 [7.00].079 [.00] PNEL THICKNESS.03-.07 [0.80-.80].075-.6 [.90-3.0] DIMENSIONS.40 [3.50].48 [3.70].378 [35.00] TERMINL OPTIONS 5 PNEL THICKNESS.03-.07 [0.8-.8] DIM X.40 [3.50] Cross Section.87 Q.C..50 Q.C..57 Solder.075-.6 [.9-3.].48 [3.70] IEC-HS FUSED INLET & OUTLET WITH UNIVERSL PNEL SNP.047 [5.00].890 [48.00].976 [4.80].787 [0.00].976 [4.80].37 [33.70] IEC-HS-.60 [3.00].996 [50.70] www.adam-tech.com 35
C INLETS & OUTLETS IEC-GS- FUSED INLET WITH SWITCH, SNP IN PNEL MOUNT PRT NUMBER IEC-GS--00 DIM "".039 [.00] IEC-GS--50.059 [.50] USE ONLY WITH 50V FUSE.968 [50.00].834 [46.60] IEC-GS--00.079 [.00].767 [9.50].00 [30.50] "" SECTION..846 [46.90] IEC-GS--00 R.059 [.50].074 [7.30] Recomended IEC-FS- FUSED INLET WITH SWITCH, SCREW ON PNEL MOUNT IEC-FS-.780 [9.80].574 [40.00].4 [9.00].5 [54.00].834 [46.60] ø.36 [6.00].77 [4.50].30 [3.30] 36 www.adam-tech.com
STCKED C OUTLETS.38 [35.00].06 [7.00].79 [0.00] IEC-D-S STCKED OUTLETS WITH DEDICTED PNEL SNPS B THRU 7 PORTS VILBLE.80 [3.50].60 [3.00].059 [.50] X.063 [3.00 X.60] C.70 [8.30] R.098 [.50] Cross SECTION Section - PNEL CUT-OUT DIMENSIONS PRT NUMBER PORTS B C IEC-D-S-50.007 [5.00].890 [48.00].90 [48.30] IEC-D-S3-50 3.953 [75.00].835 [7.00].846 [7.30] IEC-D-S4-50 IEC-D-S5-50 4 5 3.897 [99.00] 3.780 [96.00] 3.79 [96.30] 4.84 [3.00] 4.74 [0.00] 4.736 [0.30] IEC-D-S4-50 IEC-D-S6-50 6 5.787 [47.00] 5.670 [44.00] 5.68 [44.30] IEC-D-S7-50 7 6.73 [7.00] 6.64 [68.00] 6.66 [68.30] *PRT NUMBERS SHOWN RE FOR.5mm PNEL THICKNESS. CONSULT FCTORY FOR OTHER PNEL THICKNESSES REQUIREMENTS www.adam-tech.com 37
POWER OUTLET NEM RECEPTCLES.063 [7.00].468 [.90].866 [.00].70 [8.00].47 [0.60] PNEL THICKNESS.03 [0.80].039 [.00].047 [.0].063 [.60] DIM..968 [4.60].99 [5.0].03 [6.0] NEM-5-- UNIVERSL PNEL SNP.500 [.70] For.50mm Panel Thickness PNEL CUT-OUT NEM-5-- NEM-5--B.38.80 [30.00] NEM-5-.700 [7.78].846 [.50] Straight Ground.063 [7.00].468 [.90].866 [.00].47 [0.60] NEM-5- UNIVERSL PNEL SNP.500 [.70].38.70 [8.00] -4 wg PNEL Wire CUT-OUT For.50mm Panel Thickness.80 [30.00] NEM-5-.700 [7.78].846 [.50].500 [.70] NEM-5-3 UNIVERSL PNEL SNP.063 [7.00].468 [.90].08 [5.30].8 [30.00] For PNEL Panel CUT-OUT 0.8mm -.50mm NEM-5-3 38 www.adam-tech.com
MINI C OUTLETS MINI IEC CONNECTORS.0 [8.00] [8.60] IEC-N-4 BODY STYLE "N" UNIVERSL PNEL SNP.886 [.50].0 [.60].748 [9.00].638 [6.0].49 [.50].768 [9.50].964 [4.50].95 [7.50] PNEL CUT-OUT.047 x.098 [.0 x.50] PCB LYOUT.866 [.00] [8.60] IEC-NB-4 DEDICTED PNEL SNP.590 [5.00].886 [.50].059 [.50].059 [.50].638 [6.0].756 [9.0].480 [.0] BODY STYLE "NB".748 [9.00] PNEL CUT-OUT.047 x.098 [.0 x.50] [8.60].590 [5.00] IEC-NB--4 BODY STYLE "NB-" SLIDE ON PNEL.689 [7.50].567 [4.40] [3.70].36 [9.0].886 [.50].787 [0.00].059 [.50].059 [.50].756 [9.0].480 [.0].05 [5.0].5 [3.00] [3.70] ø.043 x.059 [.0 x.50] PCB LYOUT www.adam-tech.com 39
MINI C OUTLETS MINI IEC CONNECTORS ø.30 [3.30] [8.60.646.0 [8.00] [6.40] IEC-NC-4 RIGHT NGLE PNEL MOUNT.590 [5.00].47 [.00].756 [9.0].38.807 [0.50].039 [.00].57 [4.00] ø.65 [4.0].87 [.00].488 [.39].807 [0.50].0 [8.00].047 x.098 [.0 x.50] [8.60.646 [6.40].0 [8.00] IEC-NC--4 RIGHT NGLE PNEL MOUNT.590 [5.00].47 [.00].38 ø.30 [3.30].756 [9.0].56 [6.50].807 [0.50].57 [4.00] ø.65 [4.0].87 [.00].0 [8.00].488 [.39].047 x.098 [.0 x.50].807 [0.50] [8.60].8 [0.60] IEC-ND-4 RIGHT NGLE PNEL MOUNT.57 [4.50].5 [3.00].34 x.73 [3.40 x 4.40].4 [0.70].56 [6.50].8 [0.60]. [8.50].57 [3.40].33 [8.40].043 x.098 [.0 x.50] PLCS.087.47 [.00].055 x.6 [.40 x 3.0] PLCS ø.38.89 [0.80] R.079 [.00].50 [3.0] ø.34 [3.40] 40 www.adam-tech.com
MINI C OUTLETS MINI IEC CONNECTORS [8.60].8 [0.60] IEC-NF-4 RIGHT NGLE PNEL MOUNT.57 [4.50].5 [3.00].34 x.73 [3.40 x 4.40].4 [0.70].56 [6.50].8 [0.60]. [8.50].57 [3.40].055 x.6 [.40 x 3.0] PLCS.043 x.098 [.0 x.50] PLCS.47 [.00].087 ø.38.89 [0.80] R.079 [.00].50 [3.0] ø.34 [3.40].689 [7.50].394 [0.00].669 [7.00].650 [6.50] IEC-NH-4 RIGHT NGLE SLIDE ON PNEL.090 [.30].059 [.50].5 [3.00].886 [.50].748 [8.99].36 [9.0].05 [5.0].567 [4.40].05 [5.0] [3.70] [3.70] [3.70] ø.043 x.059 [.0 x.50].059 [.50].795 [0.0].657 [6.70].77 [8.0].394 [0.00].689 [7.50].669 [7.00].60 [5.50].543 [39.0].8 [30.00] N E L IEC-NH--4 RIGHT NGLE SCREW ON PNEL MOUNT ø.6 [3.0] [3.70].890 [.60].567 [4.40].38.043 x.07 [.0 x.80].906 [3.00].039 [.00].787 [0.00].098 [.50] [3.70].8 [30.00].705 [7.90] www.adam-tech.com 4