High Speed Doors All our door components are designed for use in a range of climate conditions Our doors meet the highest standards of quality
01 Table of Contents 01 High Speed Doors: Their Advantages 3 02 03 04 05 06 Indoor DynamicRoll Basis Doors Outdoor DynamicRoll Plus Doors DynamicRoll Food Doors for the Food Industry DynamicRoll Frigo 2 Cooler Doors DynamicRoll CВ Clean Room Doors 4-5 6-7 8-9 10-11 12-13
High Speed Doors High-Speed Doors and Their Advantages Heating and cooling of industrial and storage facilities today is becoming one of the key expenses for most organizations. Due to continuously rising energy prices today s companies have to take steps to introduce new energy-efficient technologies. One of the most efficient ways to save on energy costs is installation of flexible PVC doors on heavy-traffic buildings. DoorHan High-Speed Roll-Up Door curtain fabrics are made from durable polyester (700 1 700 g/m 2 ) with embedded vision panels to provide a view of areas on the opposite side of the doors. Our unique doors provide high traffic through-put capacity while minimizing heat losses. Thanks to our doors rapid operation indoor climates can be maintained even with heavy traffic. DoorHan doors can be configured for a wide range of opening and closing speeds, allowing you to precisely set the best speed for your application. Door curtains are made without any rigid pieces, making them safe for use by equipment and staff. DoorHan high-speed doors are self-repairing, meaning that if door curtains come off of their track (for example, in the event of impact with a forklift) the system will automatically guide the curtain back into the track on the next cycle. DynamicRoll side frames and tracks are made from galvanized steel, or can be custom-ordered in stainless steel and painted various RAL colors. Modular construction allows easy interchange of door parts. At the heart of the DynamicRoll high-speed door design is our unique and innovative ridged curtain edge that holds the door curtain in the side track. This system eliminates the need for rigid elements in the door curtain and allows it to withstand high wind loads. DoorHan offers five DynamicRoll High Speed Door models for use in different applications: DynamicRoll Basis for interior openings DynamicRoll Plus for exterior openings DynamicRoll Food for use in the food processing plants DynamicRoll Frigo 2 for walk-in coolers and freezers DynamicRoll CB for clean rooms with controlled environments. DynamicRoll high-speed doors offer the following primary advantages: they are self-repairing door curtain fabric is free of rigid elements motor with inverter allowing operating speeds up to 2.5 m/s oil-free side guides allow doors to withstand wind loads of up to 120 km/h operational life of 1.5 million cycles work intensity 80% minimal maintenance quiet operation. 3
DynamicRoll Basis Indoor DynamicRoll Basis Doors 02 Technical and Operating Specs Application Maximum Size, W H Wind Load Opening Speed Closing Speed Working Temperature Range Hardware Materials Control Box Drive System Safety Features Power Supply Operating Life universal indoor openings in industrial, storage, and commercial facilities 7 000 5 400 mm for doors up to 3 500 mm wide CLASS3 (120 km/h); up to 4 500 mm wide CLASS2 (90 km/h) for doors up to 5 000 mm wide 2.5 m/s; 5 000 mm and wider 1.2 m/s 0.8 m/s from 15 to +70 C if drive is installed indoors; from 5 to +70 C if drive is installed outdoors; from 35 to +70 C with drive and side frame heating systems frame and side galvanized steel or stainless steel class Aisi304, Aisi316 (optional); drive shaft galvanized steel D = 90/130 mm; track guides extruded polyethylene; curtain light-proof reinforced PVC, 1 200 g/m 2 density; vision panels 1 mm thick translucent PVC painted steel or stainless steel Aisi304 (optional) housing; size 300 400 150 mm; safety class IP65; variable speed drive supply voltage 220 V/50 Hz; power 1.5 kw; safety class IP65; final shaft position indicated by encoder door meets European Standard En 13241 CE; one pair of photo cells installed 500 mm from floor level and the second one (optional) at top of side frames to correct opening errors caused by improper unrolling of door curtain; when door s soft lower edge impacts an object while closing a sensor sends a radio signal to the control box and the door immediately opens (optional); doors will open automatically about 2 000 mm if a power failure occurs via a counterweight (optional feature) 220 V/50 Hz; single phase 1 500 000 cycles Standard Door Curtain Fabric Colors RAL 9010 pure white RAL 2004 pure orange RAL 5002 ultramarine blue RAL 6026 opal green RAL 9006 white aluminium RAL 1003 signal yellow RAL 3002 carmine red 4
High Speed Doors Construction 3 3 2 1 4 10 11 5 9 6 7 8 2 1 4 10 11 12 5 9 6 7 8 1. Drive 2. Shaft 3. Shaft case 4. Door сurtain 5. Vision panel (window) 6. Curtain track 7. Vertical track cover 8. Bottom edge of curtain 9. Photo cell 10. Side frame 11. Control box 12. Counterweight Standard Door Door with Counterweight Mounting Dimensions Drive side mounted Drive mounted in front Drive side mounted, with counterweight Drive mounted in front, with counterweight 5
DynamicRoll Plus Outdoor DynamicRoll Plus Doors 03 Technical and Operating Specs Application Maximum Size, W H Wind Load Opening Speed Closing Speed Working Temperature Range universal for exterior and interior openings in industrial, storage, and commercial facilities 7 000 5 400 mm for doors 3 500 mm or less wide CLASS3 (120 km/h); up to 4 500 mm wide CLASS2 (90 km/h) for doors 5 000 mm or less wide 2.5 m/s; 5 000 mm or wider 1.2 m/s 0.8 m/s from 15 to +70 C if drive is installed indoors; from 5 to +70 C if drive is installed outdoors; from 35 to +70 C with drive and side frame heating systems Hardware Materials sides and frame galvanized steel or stainless steel Aisi304, Aisi316 (optional ); gear shaft galvanized steel D = 90/130 mm; track guides extruded polyethylene; door curtain light-proof reinforced PVC, density 1 200 g/m 2 ; vision panels 1 mm thick translucent PVC Control Box Drive Safety Features painted steel or stainless steel Aisi304 (optional) housing; size 300 400 150 mm; safety class IP65; variable speed drive supply voltage 220 V/50 Hz; power 1,5 kw; safety class IP65; final shaft position indicated by encoder meets European Standard En 13241 CE; one pair of photo cells installed 500 mm from floor level and the second one (optional) at top of side frames to correct opening errors caused by improper unrolling of door curtain; when door s soft lower edge impacts an object while closing a sensor sends a radio signal to the control box and the door immediately opens (optional); doors will open automatically about 2 000 mm if a power failure occurs via a counterweight (optional feature) Power Supply Operating Life 220 V/50 Hz; single phase 1 500 000 cycles Standard Door Curtain Fabric Colors 6 RAL 9010 pure white RAL 2004 pure orange RAL 5002 ultramarine blue RAL 6026 opal green RAL 9006 white aluminium RAL 1003 signal yellow RAL 3002 carmine red
High Speed Doors Mounting Dimensions Drive side mounted Drive mounted in front Drive side mounted, with counterweight Drive mounted in front, with counterweight 7
DynamicRoll food DynamicROLL FOOD doors for the food Industry 04 Technical and Operating Specs Application Maximum Size, W H Wind Load Opening Speed Closing Speed Working Temperature Range Hardware Materials Control Box Drive Safety Features Power Supply Operating Life food industry facilities 4 000 4 000 mm Class1 (80 km/h) 2.5 m/s 0.8 m/s from 15 to +70 C if drive is installed indoors; from 5 to +70 C if drive is installed on building exterior; from 35 to +70 C if side frames and drive are heated sides and frame stainless steel Aisi304, polyethylene PE; gear shaft galvanized steel D = 90/130 mm or stainless steel Aisi304 (optional ); track guides extruded polyethylene; door curtain light-proof reinforced PVC, density 1 200 g/m 2 ; vision panels 1 mm thick translucent PVC painted steel or stainless steel Aisi304 (optional) housing; size 300 400 150 mm; safety class IP 65; variable speed drive supply voltage 220 V/50 Hz; power 1.5 kw; safety class IP 65; final shaft position indicated by encoder meets European Standard En 13241 CE; one pair of photo cells installed 500 mm from floor level and the second one (optional) at top of side frames to correct opening errors caused by improper unrolling of door curtain; when door s soft lower edge impacts an object while closing a sensor sends a radio signal to the control box and the door immediately opens (optional) 220 V/50 Hz; single phase 1 500 000 cycles Standard Door Curtain Fabric Colors 8 RAL 9010 pure white RAL 2004 pure orange RAL 5002 ultramarine blue RAL 6026 opal green RAL 9006 white aluminium RAL 1003 signal yellow RAL 3002 carmine red
High Speed Doors Mounting Dimensions Drive side mounted 9
DynamicRoll Frigo 2 DynamicRoll Frigo 2 Cooler Doors 05 Technical and Operating Specs Application Maximum Size, W H Wind Load Opening Speed Closing Speed Working Temperature Range Hardware Materials Control Box Drive Safety Features Power Supply Operating Life walk-in coolers/freezers or areas with separate temperature regimes 4 500 5 000 mm CLASS1 (80 km/h) 1 m/s 0.8 m/s from 15 to +70 C if drive is installed indoors; from 5 to +70 C if drive is installed on building exterior; from 35 to +70 C if using side frame and drive heating sides and frame galvanized steel (standard) or stainless steel Aisi304 (optional); gear shaft galvanized steel D = 90/130 mm; track guides extruded polyethylene; door curtain light-proof reinforced PVC, density 1 200 g/m 2 ; vision panels 1 mm translucent PVC painted steel or stainless steel Aisi304 (optional) housing; size 300 400 150 mm; safety class IP 65; variable speed drive supply voltage 220 V/50 Hz; power 1.5 kw; safety class ip 65; final shaft position indicated by encoder meets European Standard En 13241 CE; one pair of photo cells installed 500 mm from floor level and the second one (optional) at top of side frames to correct opening errors caused by improper unrolling of door curtain; when door s soft lower edge impacts an object while closing a sensor sends a radio signal to the control box and the door immediately opens (optional) 220 V/50 Hz; single phase 1 500 000 cycles Standard Door Curtain Fabric Colors RAL 9010 pure white RAL 2004 pure orange RAL 5002 ultramarine blue RAL 6026 opal green RAL 9006 white aluminium RAL 1003 signal yellow RAL 3002 carmine red 10
High Speed Doors Mounting Dimensions Drive side mounted 11
DynamicRoll CВ DynamicRoll CВ Clean Room Doors 06 Technical and Operating Specs Application Maximum Size, W H Wind Load Opening Speed Closing Speed Working Temperature Range Hardware Materials Control Box Drive Safety Features Power Supply Operating Life clean rooms with controlled environments 4 000 4 000 mm CLASS1 (80 km/h) 2.5 m/s 0.8 m/s from 15 to +70 C if drive is installed indoors; from 5 to +70 C if drive is installed on the building exterior; from 35 to +70 C with side frame and drive heating sides and frame stainless steel Aisi304; gear shaft stainless steel Aisi304 D = 90/130 mm; track guides extruded polyethylene; door curtain light-proof reinforced polyurethane 1 700 g/m 2 density; windows 1 mm thick translucent PVC integrated in door frame; variable speed drive supply voltage 220 V/50 Hz; power 1,5 kw; safety class IP 65; final shaft position monitored by encoder meets European Standard En 13241 CE; one pair of photo cells installed 500 mm from floor level and the second one (optional) at top of side frames to correct opening errors caused by improper unrolling of door curtain; when door s soft lower edge impacts an object while closing a sensor sends a radio signal to the control box and the door immediately opens (optional); doors will open automatically about 2 000 mm if a power failure occurs via a counterweight (optional feature) 220 V/50 Hz; single phase 1 500 000 cycles Standard Door Curtain Fabric Colors RAL 9010 pure white RAL 2004 pure orange RAL 5002 ultramarine blue RAL 6026 opal green RAL 9006 white aluminium RAL 1003 signal yellow RAL 3002 carmine red 12
High Speed Doors Mounting Dimensions 13
NOTES 14
15
plants Door systems docking systems Automation systems Russia, MOSCOW 143002, Russia, Moscow oblast, Odintsovo district, s. Akulovo, ul. Novaya, d. 120 Tel. +7 495 933 2400 Fax +7 495 937 9550 E-mail: info@doorhan.com China, SUZHOU Gucun Road 188, Xukou Town, Suzhou, PC: 215164 Tel. +86 512 66 31 61 11/66 31 61 08 Fax +86 512 66 31 61 06 E-mail: sales.suzhou@doorhan.com Czech Republic, KADAN 43201, Kralovsky VRCH 2018 Tel. +420 474 319 111 Mobile +420 607 508 343 E-mail: europe@doorhan.com www.doorhan.com