Char-Lynn Disc Valve Motors 0-0-8 EN-0500 Parts Information 4000 Compact Series Geroler Motors 00
Parts Drawing/List Displacement cm 3 /r [in 3 /r] 0 [ 9.8] 00 [.3] 50 [5.4] 305 [9.8] 395 [4.0] 490 [9.8] Drive, Main Item No. 9 Part No./Length Part No. mm [inch] 0989-004 0989-005 Geroler Item No. 0 Part No./Width Part No. mm [inch] 087-004 Screw, Cap (Standard/Wheel) Item No. Part No./Length Part No. mm [in.] Screw, Cap ( Bearingless) Item No. Part No./Length Part No. mm [in.] 8,3 [3.4] 35, [.40] 4384-008 44,8 [5.70] 4384-004 7,3 [5.0] 9, [3.0] 087-005 44,7 [.7] 4384-00 54,9 [.0] 4384-007 38,4 [5.45] 0989-00 0,9 [4.05] 087-00 5,0 [.] 4384-0 4,5 [.48] 4384-008 44,8 [5.70] 0989-007 9, [4.9] 087-007 7,0 [.83] 4384-04 8,4 [7.8] 4384-0 4,5 [.48] 43-008 9, [4.9] 44-008 7,0 [.83] 4384-04 8,4 [7.8] 4384-0 4,5 [.48] 43-0 3, [5.3] 44-00 89,4 [3.5] 4384-09 99, [7.8] 4384-04 8,4 [7.8] 9 0 4 Flange, Wheel Mount 5 Flange, Standard Mount 4 7 8 4 9 7 9 3 3 9 30 Parts Shown Turned 90 from those Shown Above 8 5 5 50 9 5 0 53 5 39 Flange, Bearingless ABC 58 Flange, Magneto Mount 7 54 5 4 5 7 8
Parts List of O O O Quantity per Unit Ref Part Number Part Number No. (per shaft size) (per shaft size) Description Std. Whl. Brgl. 3 4 08-00 439-008 08-00 440-005 08-003 43-000 439-00 08-004 9-00 9057-009 4857-00 Shaft and Bearing Kit (-/4 inch Straight) Key (for -/4 Straight Shaft) Shaft and Bearing Kit (-/ inch Straight) Key (for -/ Straight Shaft) Shaft and Bearing Kit (3 mm Straight) Key (for 3mm Straight Shaft) Shaft and Bearing Kit (40 mm Straight) Key (for 40mm Straight Shaft) Shaft and Bearing Kit (-/4 in. Tapered) Nut, Hex (-/4 in. Tapered Shaft) Key (for -/4 in. Tapered Shaft) Shaft and Bearing Kit (-5/8 in. Tapered) Nut, Hex (-5/8 in. Tapered Shaft) Key (for -5/8 in. Tapered Shaft) Shaft and Bearing Kit (-/4 in. Splined 4T) Shaft and Bearing Kit (-/ in. Splined 7T) Seal, Exclusion Seal, Shaft Seal, Shaft High Pressure (no Back-up Ring required) 5 738-000 943-000 Ring, Back-up 044-004 044-003 044-05 044-00 044-005 044-008 4 48-00 48-004 Seal Guard 333-000 334-000 337-000 08-0 4393-05 08-008 4458-007 08-098 430-000 4394-007 08-099 903-00 9057-0 044-098 044-099 353-000 35-000 N/A Housing, Bearing, SAE A (Two Bolt) Housing, Bearing, Wheel Mount (Four Bolt) Housing, Bearing, Wheel Mount (Four Bolt) Compatible for HAYES Brake Housing, Bearing, SAE B (Two Bolt) Housing, Bearing, Diagonal (Four Bolt) Housing, Bearing, Magneto (Four Bolt) Seal Kit (Std. and Whl. Motors with back pressure relief valve) Contains Parts Indicated by Seal Kit (Std. and Whl. Motors without back pressure relief valve) Contains Parts Indicated by O Seal Kit (Std. and Whl. Motors with high pressure shaft seal) Contains Parts Indicated by O # X O X O # X O # X Ref Part Quantity per Unit No. Number Description Std. Whl. Brgl. 530-040 Seal 4 4 7 8 0 Geroler 03330-00 Plate, Valve (for motor without Shuttle) 087-00 Drive, Valve 3 4-000 Valve 0307-00 Valve Speed Sensor Valve 0307-003 Valve Speed Sensor Valve Quadrature 4 895-000 Balance Ring 7383-000 Spring, Compression 7 9049-00 Seal, Face, Inner 8 9 Drive, Main 5 0877-00 08-003 08-004 03330-00 435-000 935-00 See Chart on Opposite Page. Seal, Shaft Face Plate, Wear (no leakage slots) Plate, Wear (with leakage slots) Plate, Valve (for motor with Shuttle) Pin, Balance Ring Seal, Face, Outer Continued on Page 5 3
Page (Duplicated) Displacement cm 3 /r [in 3 /r] 0 [ 9.8] 00 [.3] 50 [5.4] 305 [9.8] 395 [4.0] 490 [9.8] Drive, Main Item No. 9 Part No./Length Part No. mm [inch] 0989-004 0989-005 Geroler Item No. 0 Part No./Width Part No. mm [inch] 087-004 Screw, Cap (Standard/Wheel) Item No. Part No./Length Part No. mm [in.] Screw, Cap ( Bearingless) Item No. Part No./Length Part No. mm [in.] 8,3 [3.4] 35, [.40] 4384-008 44,8 [5.70] 4384-004 7,3 [5.0] 9, [3.0] 087-005 44,7 [.7] 4384-00 54,9 [.0] 4384-007 38,4 [5.45] 0989-00 0,9 [4.05] 087-00 5,0 [.] 4384-0 4,5 [.48] 4384-008 44,8 [5.70] 0989-007 9, [4.9] 087-007 7,0 [.83] 4384-04 8,4 [7.8] 4384-0 4,5 [.48] 43-008 9, [4.9] 44-008 7,0 [.83] 4384-04 8,4 [7.8] 4384-0 4,5 [.48] 43-0 3, [5.3] 44-00 89,4 [3.5] 4384-09 99, [7.8] 4384-04 8,4 [7.8] 9 0 4 Flange, Wheel Mount 5 Flange, Standard Mount 4 7 8 4 9 7 9 3 3 9 30 Parts Shown Turned 90 from those Shown Above 8 5 5 50 9 5 0 53 5 39 Flange, Bearingless ABC 58 Flange, Magneto Mount 7 54 5 4 5 7 8 4
Parts List of # Continued from Page 3 Ref Part Quantity per Unit No. Number Description Std. Whl. Brgl. 9 54-00 Housing, Valve (7/8-4 Str. Thrd. O-ring (Staggard Ports) 7/-0 Case Drain Port) 0 54-007 043-004 54-0 54-033 54-00 54-009 043-005 907-003 50003-904 970-00 50003-904 O-ring Screw, Cap 4 4 4 4 0494-00 Piston Shuttle 5 857-000 Poppet 30079-000 Spring 7 8755-000 Sleeve, Dash Pot 8 907-005 Plug/O-ring Assembly (9/-8 Shuttle Valve End) 50003-90 9 58-000 30 0397-00 0397-00 39 037-00 Housing, Valve (G / (BSP) (Staggard Ports) G /4 (BSP) Case Drain Port) Housing, Valve (7/8-4 Str. Thrd. O-ring (End Ports) 7/-0 Case Drain Port Shuttle and Low Press. Relief) Housing, Valve (7/8-4 Str. Thrd. O-ring (Staggard Ports) 7/-0 Case Drain Port) for Speed Sensor (037-00 Ref. 39) Housing, Valve (7/8-4 Str. Thrd. O-ring (Staggard Ports) 7/-0 Case Drain Port) for Quadrature Speed Sensor (Ref. 39) Housing, Valve ( /- Str. Thrd. O-ring Ports (80 Apart) 7/-0 Case Drain Port) Housing, Valve (7/8-4 Str. Thrd. O-ring (End Ports) 7/-0 Case Drain Port) Housing, Valve (7/8-4 Str. Thrd. O-ring (Staggard Ports) 7/-0 Case Drain Port) Shuttle and Low Press. Relief Plug/O-ring Assembly (7/-0 Case Drain Plug) O-ring Plug/O-ring Assembly (G /4 (BSP) Case Drain Plug) O-ring Seal Flange, Mounting with leakage slots Flange, Mounting without leakage slots Sensor, Speed (7mm [5.0 in.] lead wire) 095-00 Sensor, Speed Quadrature Two speed signals in quadrature each providing one pulse per target tooth 095-00 Sensor, Speed Quadrature One speed signal providing two pulses per target tooth and one directional signal 3003-00 Sensor, Speed Quadrature Two speed signals in quadrature each providing one pulse per target tooth 3003-00 Sensor, Speed Quadrature One speed signal providing two pulses per target tooth and one directional signal 50 048-500 Shim A/R A/R A/R 5 704-0 Spring 5 0495-004 Poppet 53 907-004 Plug/O-ring S/A 50003-905 O-ring 54 088-003 Plug/O-ring S/A 5000-0 O-ring 5 5000-039 Seal 58 5000-0 O-ring 335-000 Seal Kit (Bearingless Motors with mounting flange) Contains Parts Indicated by # 33-000 Seal Kit (Bearingless Motors without mounting flange) Contains Parts Indicated by X See Chart on Opposite Page. Mates wiith DC Micro Connectors or Equivalent: Turk Eurofast WKCV 4.4T Cable Brad Harrison Micro-Change Single Keyway Plugs Lumberg "Micro" Style mm DC Connector A/R As Required 5
Notes:
Notes: 7
For Additional Literature Contact Eaton Hydraulics 45 Lone Oak Road Eden Prairie, MN 55344. Specifications and performance data, Catalog -0-3. When servicing 4000 Compact Series Motors refer to Repair Information 07-0-0. This repair manual lists tools required, and step by step disassembly and reassembly procedures. How to Order Replacement Parts Char-Lynn Eaton Hydraulics Eden Prairie, MN 55344 Product Number 000 0000 000 Date Each Order Must Include the Following:. Product Number. Date Code 3. Part Name 4. Part Number 5. Quantity of Parts Product Line Identification Number Product Identification Number Engineering Change Code Information contained in this catalog is accurate as of the publication date and is subject to change without notice. Performance values are typical values. Customers are responsible for selecting products for their applications using normal engineering methods. Eaton Hydraulics 45 Lone Oak Road Eden Prairie, MN 55344 Telephone: 95 937-754 Fax: 95 937-730 www.eatonhydraulics.com 4 New Lane, Havant Hampshire PO9 NB England Telephone: (44) 70-548-45 Fax: (44) 70-548-70 ACCREDITED BY THE DUTCH COUNCIL FOR CERTIFICATION Reg. No. 4 ISO-900 CERTIFICATED FIRM DET NORSKE VERITAS INDUSTRY BV, THE NETHERLANDS Quality System Certified Products in this catalog are manufactured in an ISO-900-certified site. 0-0-8 Copyright Eaton Corporation, 000 EN-0500 All rights reserved. Printed in U.S.A