ML-DTL-83723, Series, TLE OF CONTENTS ML-DTL-83723, Series, : Design Features, Customer Options, Manufacturer s Specifications.... 363, 364 Quick Reference of Choices - Threaded Styles............... 365-367 Quick Reference of Choices - ayonet Styles.................. 368 Quick Reference of Choices - Hermetic Receptacles, Threaded....... 369, 370 nsert vailability, lternate Keying Positions.................. 37 nsert rrangement Drawings...................... 372, 373 How to Order - Military or Commercial..................... 374 How to Order - Commercial Designed to Meet GE Specifications...... 375 How to Order - oeing (CC63CM/CN) or Comm. Equivalent....... 376 How to Order - SD Designation (EN997)................... 377 How to Order - Commercial Equivalents to SD Designations/ European Standards.............................. 378 How to Order - ESC0/ for SC and Rolls Royce Standards......... 379 How to Order - Commercial Equivalent to ESC/ European Specifications - Scoop-Proof only.................. 380 How to Order - Hermetic, Military or Commercial................ 38 Threaded Styles: Square Flange Receptacle........................... 382 Jam Nut (D-Hole Mount) Receptacle...................... 383 Straight Plug & Non-Decoupling Plug..................... 384 ayonet Styles: Square Flange Receptacle........................... 385 Jam Nut (D-Hole Mount) Receptacle...................... 386 Straight Plug................................. 387 Hermetic Styles: Square Flange Receptacle........................... 388 Jam Nut (D-Hole Mount) Receptacle...................... 389 Solder Mount/Weld Mount Receptacle..................... 390, Sealing Plugs, Tools:, Sealing Plugs, Tools....................... 39-394 ML-DTL-83723 Series, Typical Markets: Military & Commercial viation - Temperature pplications, Harsh Environments Military Vehicles 362
ML-DTL-83723, Series, Threaded or ayonet, Temp. Stainless Steel offers the Product line of ML-DTL-83723*, Series. ccessory Orientation Teeth (Optional 360 also available) Full Mating ndicator Threaded Coupling Static Dynamic O Ring Seal Closed Entry Socket RF Grounding Spring (Optional) Knurled Coupling Nut Grip id lue Rear ndicator / 83723 Series high temperature styles are capable of operation at 260 C/500 F. 00% scoop-proof version of the high temperature connector is also available under specification ESC/ HTK Series. n addition, this connector series incorporates a unique sealing grommet that is capable of sealing on standard diameter wire as well as Kapton wire of reduced diameter. The 83723 family provides connectors in environmental, firewall and hermetic classes that exceed the most stringent specification requirements. ML-DTL-83723, Series are vailable in a Wide Variety of Styles: THREDED STYLE CONNECTORS Stainless steel shells** provide corrosion resistance Metal-to-metal bottoming Unique sealing grommet accepts a wide range of wire diameters Patented non-decoupling device in plugs - a self-locking clutch plate that provides greater resistance to decoupling than coupling during vibration YONET STYLE CONNECTORS Same quality features of the threaded style, but with 3 point bayonet coupling - quick turn to lock, visual confirmation of complete coupling Design Features (Threaded Style Shown) HGH TEMPERTURE STYLE CONNECTORS temperature connector materials and contacts provide operation to 200 C and Firewall capability to 260 C mproved metal-to-metal bottoming design Unique sealing grommet accepts a wide range of wire diameters mproved 360 accessory orientation teeth provide greater performance under vibration Patented non-decoupling device (torque differential) mproved shell-to-shell conductivity with optional RF grounding fingers Styles available that meet several European specifications, General Electric and Rolls Royce specifications Special Geometry Styles available HERMETC STYLE CONNECTORS Hermetic styles are available in threaded receptacles with solderwell or flat eyelet termination. PC Tail Designs are available on request. Designed for environmental moisture sealing with fused compression glass sealed inserts temperature hermetics 200 C and 260 C Firewall The ML-DTL-83723, Series family of connectors includes styles from National. These have proven technology for severe environments and are widely used in commercial and military aerospace markets. / 83723 connectors incorporate many advantageous features, such as a unique threaded coupling mechanism that provides greater resistance to decoupling. This coupling mechanism eliminates the need for safety wiring and tends to couple during vibration - thus offering the user added assurance and a margin of safety. SERVCE RTNGS Service Rating Recommended Operating C Voltage at Sea Level Test Voltage C (RMS), 60 cps Sea Level 50,000 ft. 70,000 ft. 0,000 ft. 600,500 500 375 200 Please note that the electrical data given is not an establishment of electrical safety factors. This is left entirely in the designer s hands as he can best determine which peak voltage, switching surges, transients, etc. can be expected in a partic ular circuit. with PC Tail and Standoff * ML-DTL-83723 supersedes ML-C-83723. ** The 83723 family is offered in stainless steel shell classes. See the 83723 family for aluminum shell classes in the preceding section of this catalog. EM Filter 83723 26500 505 Crimp Rear 22992 Class L ack- s Options Others 363
ML-DTL-83723, Series, Manufacturer s Specifications EM Filter 83723 The / Product line of ML-DTL-83723*, Series was developed for the higher operating temperatures inherent in today s high performance aircraft and aircraft engines. These connectors meet the performance requirements of the following manufacturer s specifications: oeing CC63CM/CN* Firewall European: SD EN2997 General Electric: M50TF3564 Rolls Royce/SC: ESC0 and ESC Operating Temperature Data ltitude Voltage reakdown Rating Rating Retention Strength Connector Durability ML-DTL-83723, SERES CONNECTOR PERFORMNCE CHRCTERSTCS Std: 85 F ( 65 C) to 392 F (200 C) Class K types meet fireproof test per ML-DTL-83723 2000 F (093 C) Temperature Series: Operates at 500 F (260 C) Sea Level to 0,000 feet Service Rating Sea Level...,500 50,000 ft....500 70,000 ft.... 375 0,000 ft.... 200 20 contacts... 7.5 amperes max. 6 contacts... 3.0 amperes max. 2 contacts... 23 amperes max. Exceeds ML-DTL-83723 requirements 500 cycles per ML-DTL-83723 for threaded coupling; 500 cycles per General Electric M50TF232 for non-decoupling styles To 98% relative humidity, including condensation Freezing rain Humidity Exposure Non-Decoupling Exceeds requirements of ML-DTL-83723/95 and 96. Vibration Meets ML-DTL-83723 of 4.7G s for 6 hours.; oeing CC63CM/CN for 36 hours General Electric vibration spec. M50TF232 and M50TF2238 for 36 hours, which includes: Temp. Extremes G Level Time Length Room Temp.... 60 G s... 2 hrs. (4 hrs. each axis) 65 F ±5 F... 60 G s... 2 hrs. (4 hrs. each axis) 350 F ±5 F... 60 G s...2 hrs. (4 hrs. each axis) ESC Engine Connector 505 26500 Options ack- 22992 Others s Class L Crimp Rear HERMETC CONNECTOR PERFORMNCE CHRCTERSTCS Thermal Shock No damage detrimental to the operation of the connector occurs when subjected to 0 cycles of thermal shock from 0 C to 90 C and back to 0 C. Physical Shock (Mated) 300 G s Moisture Resistance (Mated) 500 Megohms nsulation Resistance, Temp. (Mated) 500 Megohms Corrosion (Unmated) Complies with ML-DTL-83723 Req. Temperature Life Fully functional for 000 hours at 200 C (392 F) ambient. nternal temperature 238 C (460 F). ir Leakage (Unmated) Less than.0 micron per cubic feet per hour on application of 5 PDS pressure differential across the connector. fter 3 cycles immersed in salt water with pressure reduced to in. Hg (75,000 ft. altitude) ltitude mmersion (Mated) for 30 minutes and returned to atmosphere pressure. While connectors submerged insulation resistance should remain 000 megohms minimum and support 500 volts RMS applied without flash-over or breakdown. Potential Voltage ltitude (Unmated) * CC63CM supersedes CC63R and CC63CN supersedes CC63T. SD supersedes ECM When tested in accordance with ML-STD-202, Method 30, no flash-over or breakdown under simulated altitude conditions as shown: ltitude/service Rating 50,000... 500 C-RMS 70,000... 375 C-RMS 0,000... 200 C-RMS 364
ML-DTL-83723, Series, Sq. Flange Receptacle, Threaded - Quick Reference ML-DTL-83723, SERES SQURE FLNGE RECEPTCLE, THREDED COUPLNG M83723/82 with Sockets, Classes G, K M83723/83 with Pins, Classes G, K Commercial: T( )-7 With O ring seal, Classes G, K Comm. Special for General Electric: J-7 With Static Dynamic Seal, Stainless Steel, but not avail. in Firewall J8-7 Same as J-7 except with Scoop-proof recessed pins N-7 Same as J-7 except Electro-deposited Nickel ase N8-7 Same as N-7 except with Scoop-proof recessed pins NK-7 Same as N except Stainless Steel Firewall Special with oeing Designation: Comm. Special per oeing Co. Spec.: CC63CN** With O ring seal, Stainless Steel Firewall, with oeing approved contacts, modifications with 360 teeth per MS355 SK-7 Stainless Steel Firewall with O ring seal, qualified to oeing, Y26 Variation - with oeing approved contacts Commercial SD Designation: EN2997 ( )0 Meets SD specifications 200 C temp. (Classes K, S, Y), 260 C high temp. (Classes KE, SE, YE) Comm.- Meet Several European Stds: T( )-7 With O ring seal, Classes G, K Variations for Euro market specifications J( )-7 With Static Dynamic Seal, Classes G, K Variations for Euro market specifications Square Flange Receptacle Threaded SERVCE CLSSES* MLTRY ND COMMERCL G Stainless steel, 200 C Stainless steel, 200 C Firewall K capability Stainless steel, 200 C Firewall capability, Grounding Spring S Stainless steel, 200 C, Hermetic with P Eyelet contacts Stainless Steel, 200 C, Hermetic with Y Solderwell contacts Stainless Steel, Temp. (260 C) KE Firewall capability Stainless steel, Temp. (260 C) SE Firewall capability, Grounding Spring Stainless Steel, Temp. (260 C) YE Firewall capability, Hermetic with solderwell contacts * For Classes, R and W (aluminum shell types) - supplies these in their 83723 family. See the preceding section of this catalog, 83723. Square Flange Receptacle, Threaded, per European Stds. (Green nsert - Temp 260 C; lue insert - 200 C) Commercial - Meet Society of ritish Co./Rolls Royce Standards: ESC0 ( )0 260 C Firewall (Classes KE, SE, YE), 360 accessory teeth per MS355 ESC ( )0 260 C Firewall (Classes KE, SE, YE), Scoop-proof recessed pins, 360 accessory teeth per MS355 EM Filter 83723 26500 505 Crimp Rear ** CC63CN supersedes CC63T. See how to order pages 374-38 for complete part numbers. ayonet style square flange receptacles are shown on page 385. ESC with Scoop-Proof (Recessed pins): ESC0 & ESC also available in Hermetic square flange receptacles - See Hermetic quick ref. page 369. HTK-7 Standard ESC, Class K Firewall, Scoop-proof, Variations for Euro market specifications HNK-7 Nickel finish, Class K Firewall Mating recept. has O ring seal, Scoop-proof, Variations for Euro market specs HSK-7 Same as HTK, except this is a special designator for oeing Co. 22992 Class L ack- s Options Others 365
ML-DTL-83723, Series, Jam Nut Receptacle, Threaded - Quick Reference EM Filter ML-DTL-83723, SERES JM NUT (D-HOLE MOUNT) RECEPTCLE, THREDED COUPLNG M83723/84 with Sockets, Classes G, K M83723/85 with Pins, Classes G, K Commercial: T( )-9 With O ring seal, Classes G, K Comm. Special for General Electric: J-9 With Static Dynamic Seal, Stainless Steel, but not avail. in Firewall J8-9 Same as J-7 except with Scoop-proof recessed pins N-9 Same as J-7 except Electro-deposited Nickel ase N8-9 Same as N-7 except with Scoop-proof recessed pins NK-9 Same as N except Stainless Steel Firewall Commercial SD Designation: EN2997 ( )7 Meets SD specifications 200 C temp. (Classes K, S, Y), 260 C high temp. (Classes KE, SE, YE) NFL 5443 ( )7 Jam Nut (D-Hole Mount) Receptacle, Threaded SERVCE CLSSES* MLTRY ND COMMERCL G Stainless steel, 200 C Stainless steel, 200 C Firewall K capability Stainless steel, 200 C Firewall capability, Grounding Spring S Stainless steel, 200 C, Hermetic with P Eyelet contacts Stainless Steel, 200 C, Hermetic with Y Solderwell contacts Stainless Steel, Temp. (260 C) KE Firewall capability Stainless steel, Temp. (260 C) SE Firewall capability, Grounding Spring Stainless Steel, Temp. (260 C) YE Firewall capability, Hermetic with solderwell contacts * For Classes, R and W (aluminum shell types) - supplies these in their 83723 family. See the preceding section of this catalog, 83723. 83723 Comm.- Meet Several European Stds: T( )-9 With O ring seal, Classes G, K Variations for Euro market specifications J( )-9 With Static Dynamic Seal, Classes G, K Variations for Euro market specifications 505 26500 Options ack- 22992 Others s Class L Crimp Rear Commercial - Meet Society of ritish Co./Rolls Royce Standards: ESC0 & ESC jam nut receptacles are available in Hermetic only - See Hermetic quick ref. pages 369 & 370. No oeing Designated Jam nut receptacle. See how to order pages 374-38 for complete part numbers. ayonet style jam nut receptacles are shown on page 386. 366
ML-DTL-83723, Series, Plugs, Threaded - Quick Reference ML-DTL-83723, SERES STNDRD STRGHT PLUG, THREDED COUPLNG M83723/86 with Sockets, Classes G, K M83723/87 with Pins, Classes G, K Commercial: T( ) Mating recept. has O ring seal, Classes G, K Comm. Special for General Electric: J- With Static Dynamic Seal, Stainless Steel, but not avail. in Firewall J8- Same as J-7 except with Scoop-proof recessed pins N- Same as J-7 except Electro-deposited Nickel ase N8- Same as N-7 except with Scoop-proof recessed pins NK- Same as N except Stainless Steel Firewall No oeing straight plug designations. No SD or other European/ESC0 or ESC straight plug designations. See page 387 for ayonet style straight plug style. Standard Straight Plug, Threaded ML-DTL-83723, SERES NON-DECOUPLNG PLUG (UNQUE SELF-LOCKNG CLUTCH PLTE), THREDED COUPLNG M83723/95 with Sockets, Classes G, K M83723/96 with Pins, Classes G, K M83723/97 with EM Grounding spring, with Pins M83723/97 with EM Grounding spring, with Sockets Commercial: T( )2 Mating recept. has O ring seal, Classes G, K Comm. Special for General Electric: Special with oeing Designation: Comm. Special per oeing Co. Spec.: J-2 With Static Dynamic Seal, Stainless Steel, but not avail. in Firewall J8-2 Same as J-7 except with Scoop-proof recessed pins N-2 Same as J-7 except Electro-deposited Nickel ase N8-2 Same as N-7 except with Scoop-proof recessed pins NK-2 Same as N except Stainless Steel Firewall CC63CM** Mating recept. has O ring seal, Stainless Steel Firewall, with oeing approved contacts, modifications with 360 teeth per MS355 SK-2 Stainless Steel Firewall qual. to oeing, Y26 Variation - with oeing approved contacts ** CC63CM supersedes CC63R. See how to order pages 374-38 for complete part numbers. No ayonet style Non-Decoupling plug available. SERVCE CLSSES* MLTRY ND COMMERCL G Stainless steel, 200 C Stainless steel, 200 C Firewall K capability Stainless steel, 200 C Firewall capability, Grounding Spring S Stainless Steel, Temp. (260 C) KE Firewall capability Stainless steel, Temp. (260 C) SE Firewall capability, Grounding Spring * For Classes, R and W (aluminum shell types) - supplies these in their 83723 family. See the preceding section of this catalog, 83723. Non-Decoupling Plug, Threaded Left - Green nsert - Temp 260 C and 360 ccessory Teeth; Right - lue insert - 200 C and 3 ccessory Teeth Commercial SD Designation: EN2997 ( )6 Meets SD specifications 200 C temp. (Classes K, S), 260 C high temp. (Classes KE, SE) Comm.- Meet Several European Stds: T( )-2 Mating recept. has O ring seal, Classes G, K Variations for Euro market specifications J( )-2 With Static Dynamic Seal, Classes G, K Variations for Euro market specifications Commercial - Meet Society of ritish Co./Rolls Royce Standards: ESC0 ( )6 260 C Firewall (Classes KE, SE), 360 accessory teeth per MS355 ESC ( )6 260 C Firewall (Classes KE, SE), Scoop-proof, 360 accessory teeth per MS355 ESC with Scoop-Proof (Recessed pins): HTK-2 Standard ESC, Class K Firewall, Scoop-proof, Variations for Euro market specs HNK-2 Nickel finish, Class K Firewall Mating recept. has Static Dynamic seal, Scoop-proof, Variations for Euro market specs HSK-2 Same as HTK, except this is a special designator for oeing Co. EM Filter 83723 26500 505 Crimp Rear 22992 Class L ack- s Options Others 367
ML-DTL-83723, Series, ayonet Plugs & Receptacles - Quick Reference EM Filter 83723 ML-DTL-83723, SERES SQURE FLNGE RECEPTCLE, YONET COUPLNG M83723/7 with Sockets, Classes G, K M83723/72 with Pins, Classes G, K Commercial: Y( )7 With O ring seal, Classes G, K ML-DTL-83723, SERES JM NUT (D-HOLE MOUNT) RECEPTCLE, YONET COUPLNG M83723/73 with Sockets, Classes G, K M83723/74 with Pins, Classes G, K Commercial: Y( )9 With O ring seal, Classes G, K ML-DTL-83723, SERES STRGHT PLUG, YONET COUPLNG Square Flange Receptacle with ayonet Coupling Jam Nut (D-Hole Mount) Receptacle with ayonet Coupling SERVCE CLSSES* MLTRY ND COMMERCL G Stainless steel, 200 C Stainless steel, 200 C Firewall K capability * For Classes, R and W (aluminum shell types) - supplies these in their 83723 family. See the preceding section of this catalog, 83723. 505 26500 Options ack- 22992 Others s Class L Crimp Rear M83723/75 with Sockets, Classes G, K M83723/76 with Pins, Classes G, K Commercial: Y( )0 With O ring seal, Classes G, K ayonet coupling connectors are offered in Military 83723 and Commercial equivalent designations. See how to order page 374. They are not included in oeing, GE, SD and other European specified connectors. size 28 is not available in ayonet coupling connectors. Straight Plug with ayonet Coupling 368
ML-DTL-83723, Series, Hermetic Receptacles - Quick Reference ML-DTL-83723, SERES HERMETC SQURE FLNGE RECEPTCLE, THREDED COUPLNG Commercial: Commercial SD Designation: M83723/88Y Stainless Steel, Class Y, Solderwell contacts M83723/88P Stainless Steel, Class P, Eyelet contacts TY-7 Stainless Steel, O ring Seal, Solderwell or Eyelet contacts, 200 C or 260 C FY-7 Stainless Steel, Static Dynamic Seal, Solderwell or Eyelet contacts, 200 C or 260 C NY-7 Stainless Steel, Static Dynamic Seal, Electro-deposited Nickel, Solderwell or Eyelet contacts, 200 C or 260 C EN2997Y0 / YE0 Meets SD Specifications, Stainless Steel, Class Y (200 C) / Class YE (260 C), Solderwell contacts Hermetic Square Flange Receptacle, Threaded Commercial - Meet Society of ritish Co./Rolls Royce Standards: ESC0YE2 260 C Firewall, Stainless Steel, Class YE, Solderwell contacts ESCYE2 260 C Firewall, Stainless Steel, Class YE, Solderwell contacts, Scoop-proof Recessed pins Tails available upon request SERVCE CLSSES HERMETC MLTRY ND COMMERCL Stainless Steel, 200 C, Hermetic with Y solderwell contacts Stainless steel, 200 C, Hermetic with P eyelet contacts Stainless Steel, Temp. (260 C) YE Firewall capability, Hermetic with solderwell contacts EM Filter ML-DTL-83723, SERES HERMETC JM NUT RECEPTCLE, THREDED COUPLNG Commercial: Commercial SD Designation: M83723/89Y Stainless Steel, Class Y, Solderwell contacts M83723/89P Stainless Steel, Class Y, Eyelet contacts TY-9 Stainless Steel, O ring Seal, Solderwell or Eyelet contacts, 200 C or 260 C FY-9 Stainless Steel, Static Dynamic Seal, Solderwell or Eyelet contacts, 200 C or 260 C NY-9 Stainless Steel, Static Dynamic Seal, Electro-deposited Nickel, Solderwell or Eyelet contacts, 200 C or 260 C EN2997Y7 / YE7 Meets SD Specifications, Stainless Steel, Class Y (200 C) / Class YE (260 C), Solderwell contacts Commercial - Meet Society of ritish Co./Rolls Royce Standards: ESC0YE3 260 C Firewall, Stainless Steel, Class YE, Solderwell contacts ESCYE3 260 C Firewall, Stainless Steel, Class YE, Solderwell contacts, Scoop-proof Recessed pins Tails available upon request Hermetic Jam Nut Receptacle, Threaded Commercial TY, FY and NY meet European specifications and General Electric spec. GEM50TF3564, Classes &. sizes 20, 24 and 28, consult for availability. Hermetic style receptacles are not included in oeing designations. 83723 26500 505 Crimp Rear 22992 Class L ack- s Options Others 369
ML-DTL-83723, Series, Hermetic Receptacles, cont. - Quick Reference EM Filter 83723 ML-DTL-83723, SERES HERMETC SOLDER MOUNT/WELD MOUNT RECEPTCLE, THREDED COUPLNG Commercial: Commercial SD Designation: M83723/90Y Stainless Steel, Class Y, Solderwell contacts M83723/90P Stainless Steel, Class P, Eyelet contacts TY-4 Stainless Steel, O ring Seal, Solderwell or Eyelet contacts, 200 C or 260 C FY-4 Stainless Steel, Static Dynamic Seal, Solderwell or Eyelet contacts, 200 C or 260 C NY-4 Stainless Steel, Static Dynamic Seal, Electro-deposited Nickel, Solderwell or Eyelet contacts, 200 C or 260 C EN2997Y / YE Meets SD Specifications, Stainless Steel, Class Y (200 C) / Class YE (260 C), Solderwell contacts Commercial - Meet Society of ritish Co./Rolls Royce Standards: ESC0YE 260 C Firewall, Stainless Steel, Class YE, Solderwell contacts ESCYE 260 C Firewall, Stainless Steel, Class YE, Solderwell contacts, Scoop-proof Recessed pins Tails available upon request Hermetic Solder Mount/Weld Mount Receptacle, Threaded SERVCE CLSSES HERMETC MLTRY ND COMMERCL Stainless Steel, 200 C, Hermetic with Y solderwell contacts Stainless steel, 200 C, Hermetic with P eyelet contacts Stainless Steel, Temp. (260 C) YE Firewall capability, Hermetic with solderwell contacts Commercial TY, FY and NY meet European specifications and General Electric spec. GEM50TF3564, Classes &. sizes 20, 24 and 28, consult for availability. Hermetic style receptacles are not included in oeing designations. Options ack- 22992 Others s Class L Crimp Rear 505 26500 370
ML-DTL-83723, Series, nsert vailability and dentification, lternate Keying Positions / nsert rrangement NSERT RRNGEMENTS Service Rating Total 8 2 6 20 08-03 3 3 08-98 3 3 0-02** 2 2 0-05 5 5 0-06 6 6 0-20 2 2 2-03*** 3 3 2-2 2 2 4-04*** 4 4 4-07*** 7 7 4-2 2 3 9 4-5 5 5 6-0*** 0 0 6-24 24 24 8-08 8 8 8-4*** 4 4 8-3 3 3 20-6*** 6 6 20-25 25 6 9 20-28** 28 4 24 20-39 39 2 37 20-4 4 4 22-2** 2 2 22-9*** 9 9 22-27 27 27 22-32** 32 6 26 22-39** 39 2 27 22-55 55 55 24-9 F 9 9 24-30 *** 30 30 24-43** 43 20 23 24-46 FF 46 2 Twinax 4 40 24-57 57 2 55 24-6 6 6 28-4 4 4 28-42 *** 42 42 28-9 * 9 9 Not an MS layout. * Special - consult for availability. ** Special with 83723 insert (ESC0 type, EN2997 Spec); consult for availability. *** oeing Qualified rrangements (See oeing How to Order page 376) F 24-9 is a special ground plane insert with purchased size 2 Coax contacts; consult for information. FF 24-46 is a special insert that accommodates size 8 twinax contacts with ground spring. 8 and 2 cavities can accommodate Twinax or Coax contacts; consult for information. s 20, 24 and 28 Hermetic; consult for availability. 28 not available in ayonet style. To avoid cross-plugging problems in applications requiring the use of more than one connector of the same size and arrange ment, alternate keying positions are available as indicated in the chart below. The diagram shows the engaging view of a receptacle shell with keyways. The insert is rotated counter-clockwise relative to the center-line. Plug shells would be the opposite of this diagram. n the Normal insert position (position N), the insert center line coincides with the center-line of the master key/ keyway of the shell. n the alternate keying positions (positions 6, 7, 8, 9 and Y), the minor keys/keyways are positioned with reference to mas ter key/keyway as indicated in the keying position table. LTERNTE KEYNG POSTONS OF SHELL Polarizing Key/Keyway Positions Position C D 8 thru 24 N 05 40 25 265 6 02 32 248 320 7 80 8 230 32 8 & 0 8 35 40 205 275 9 64 55 234 304 0 only Y 25 5 220 270 6 8 49 92 259 2, 4, 6, 8, 20, 22, 24 and 28 4 thru 24 LTERNTE KEYNG POSTONS (Rotation of key/keyway of shell) Keying Positions 7 92 52 222 342 8 84 52 204 334 9 24 35 99 240 Y 98 52 268 338 C Master Polarizing Keyway Shown is Engaging Face View of Receptacle with Keyways (Plug Keys would be Opposite) ESC (HTK SERES) ONLY Polarizing Key/Keyway Positions Position C D N 95 45 220 255 6 0 68 2 342 7 8 38 208 268 8 26 56 208 276 9 20 6 225 336 Position Y supersedes inactive positions 0 and Z designations. Ref. ML-STD-554. For ordering 83723 accessories, contact. For ordering information on ackshells, see ackshell section of this catalog, family J. D EM Filter 83723 26500 505 Crimp Rear 22992 Class L ack- s Options Others 37
ML-DTL-83723, Series, nsert rrangements Front face of pin insert or rear face of socket insert illustrated 5 3 6 3 2 2 4 2 5 3 2 2 3 2 nsert rrangement 08-03 08-98 0-02** 0-05 0-06 0-20 2-03*** 2-2 Service Rating Number of 3 3 2 5 6 2 3 2 20 20 20 20 20 6 6 20 4 7 5 0 2 24 nsert rrangement 4-04*** 4-07*** 4-2** 4-5 6-0*** 6-24 Service Rating Number of 4 7 9 3 5 0 24 EM Filter 2 6 20 6 20 6 20 8 4 6 3 25 83723 505 26500 Options ack- 22992 Others s Class L Crimp Rear nsert rrangement 8-08 8-4*** 8-3 20-6*** 20-25 Service Rating Number of 8 4 3 6 9 6 2 6 20 6 20 2 28 4 2 9 39 nsert rrangement 20-28** 20-39 20-4 22-2** 22-9*** Service Rating Number of 24 4 37 2 4 2 9 20 2 20 6 20 2 6 Not an MS layout. * Special - consult for availability. ** Special with 83723 insert (ESC0 type, EN2997 Spec); consult for availability. *** oeing Qualified rrangements (See oeing How to Order page 376) 8 and 2 cavities can accommodate Twinax or Coax contacts; consult for information. s 20, 24 and 28 Hermetic; consult for availability. 28 not available in ayonet style. CONTCT LEGEND 20 6 2 8 372
ML-DTL-83723, Series, nsert rrangements Front face of pin insert or rear face of socket insert illustrated 27 20 9 39 32 2 38 22 8 8 9 7 37 7 23 36 0 2 6 6 24 35 3 25 5 5 34 4 26 2 4 33 3 27 32 28 3 29 30 nsert rrangement 22-27 22-32** 22-39** 22-55 24-9 F Service Rating Number of 27 26 6 27 2 55 9 6 20 2 20 6 20 2 30 43 46 55 57 9 6 0 nsert rrangement 24-30 *** 24-43** 24-46 FF 24-57 24-6 Service Rating Number of 30 23 20 40 4 2 55 2 6 6 20 6 20 6 22 4 40 23 39 24 9 2 20 38 25 26 27 0 8 9 2 7 8 6 2 3 4 5 7 3 6 37 36 35 28 4 5 34 29 30 33 32 3 8 Twinax nsert rrangement 28-4 28-42 *** 28-9 * Service Rating Number of 4 42 9 42 9 20 2 20 EM Filter 83723 26500 505 Crimp Rear 22992 Class L 6 6 20 Not an MS layout. * Special - consult for availability. ** Special with 83723 insert (ESC0 type, EN2997 Spec); consult for availability. *** oeing Qualified rrangements (See oeing How to Order page 376) F 24-9 is a special ground plane insert with purchased size 2 Coax contacts; consult for information. FF 24-46 is a special insert that accommodates size 8 twinax contacts with ground spring. 8 and 2 cavities can accommodate Twinax or Coax contacts; consult for information. s 20, 24 and 28 Hermetic; consult for availability. 28 not available in ayonet style. CONTCT LEGEND 20 6 2 8 ack- s Options Others 373
EM Filter 83723 505 26500 Options ack- 22992 Others s Class L Crimp Rear ML-DTL-83723, Series, How to Order Military or Commercial Designation. 2. 3. 4. 5. Connector Style and Type (Crimp) ML-DTL-83723, Connector Service Series Type Class MLTRY M83723 /82 G 6-24 6 M83723 Step. Military Connector Type ML-DTL-83723 Series Step 2. Select a Connector Style (Refer to military specification slash sheet number). (How to Order Hermetic Styles is provided on page 38). /7 ayonet, Square Flange Receptacle, with sockets /72 ayonet, Square Flange Receptacle, with pins /73 ayonet, Jam Nut (D-Hole Mount) Recept., with sockets /74 ayonet, Jam Nut (D-Hole Mount) Recept., with pins /75 ayonet, Straight Plug, with sockets /76 ayonet, Straight Plug, with pins /82 Threaded, Square Flange Receptacle, with sockets /83 Threaded, Square Flange Receptacle, with pins /84 Threaded, Jam Nut (D-Hole Mount) Recept., with sockets /85 Threaded, Jam Nut (D-Hole Mount) Recept., with pins /86 Threaded, Straight Plug, with sockets /87 Threaded, Straight Plug, with pins /95 Threaded, Non-Decoupling Plug, with sockets /96 Threaded, Non-Decoupling Plug, with pins Threaded, Non-Decoupling Plug, with EM Grounding /97 spring, with sockets Threaded, Non-Decoupling Plug, with EM Grounding /98 spring, with pins Step 3. Select a Service Class G Stainless Steel K Stainless Steel Firewall Note: See 83723 styles for aluminum classes, R and W. Step 4. Select a & nsert rrangement from chart on pg. 37. (except size 28 is not available in ayonet Style) First number represents, second number is the nsert rrangement Step 5. Select an lternate Keying Position - Rotation of master key/keyway of shell. Use N for normal. Use 6, 7, 8, 9 or Y for alternate keying positions. See page 37 for descriptions. / nsert rrangement lternate Keying Position of. 2. 3. 4. 5. 6. 7. 8. ML-DTL-83723, Series Connector Style Service Class Style / nsert rrangement Type lternate Finish or Without lternate Keying Position of Variations COMMERCL T G -7 6-24 S D 06 XXX Step. Select a Commercial Connector Style Designed to be Equivalent to M83723, Series T Y Threaded with O ring seal in receptacle ayonet with O ring seal in receptacle (How to Order Hermetic Styles is provided on page 38). Step 2. Select a Service Class G Stainless steel K Stainless steel Firewall Note: See 83723 styles for aluminum classes, R and W. Step 3. Select a Style Step 4. Select a & nsert rrangement from chart on pg. 37. (except size 28 is not available in ayonet Style) First number represents, second number is the nsert rrangement. Step 5. Select a Type (Crimp) P S -0 Straight Plug, ayonet coupling only - Straight Plug, Threaded coupling only -2 Non-Decoupling Plug, Threaded coupling only Modification 360 accessory teath per MS355, EM -2F Grounding Spring on Plug only. For /97 & /98 only. -7 Square Flange Receptacle -9 Jam Nut (D-Hole Mount) Receptacle Pin Socket Step 6. lternate Finish or without D E Gold per SE S39029* Without contacts Step 7. Select an lternate Keying Position - Rotation of master key/keyway of shell. Use N for normal. Use 06, 07, 08, 09 or Y for alternate keying positions. See page 37 for descriptions. Step 8. Variations Consult for information. *Supersedes ML-C-39029 374
ML-DTL-83723, Series, How to Order Commercial - Designed to Meet General Electric Specifications. 2. 3. 4. 5. 6. 7. 8. ML-DTL-83723, Series PYLE COMMERCL DESGNED TO MEET G. E. SPECFCTONS J J8 N N8 NK Connector Type Step. Select a Commercial Connector Type Designed to Meet General Electric Specifications Threaded, Stainless Steel, Static/Dynamic Seal in receptacle Same as J except with Scoop-Proof Recessed pins Same as J except Electro-deposited Nickel Plated Same as N except with Scoop-Proof Recessed pins Same as N except Stainless Steel Firewall Step 2. Select a Style -0 ayonet Plug - Threaded Straight Plug -2 Threaded Non-Decoupling Plug -7 Square Flange Receptacle -9 Jam Nut (D-Hole Mount) Receptacle Style Step 3. Select a Modification E F G Modification (ccessory Teeth) Step 4. Select a & nsert rrangement from chart on pg. 37. First number represents, second number is the nsert rrangement. / nsert rrangement Step 5. Select a Type (Crimp) P K S L Type lternate Finish or Without Pin #20 Pins with #8 crimpwell Socket #20 Sockets with #8 crimpwell lternate Keying Position of Step 7. Select an lternate Keying Position - Rotation of master key/keyway of shell. Use N for normal. Use 06, 07, 08, 09 or Y for alternate keying positions. See page 37 for descriptions. Step 8. Variations (Primarily Designed for General Electric) Variations J -7 E 6-24 S D 06 XXXX 360 ccessory Teeth per MS355 Plug and Receptacle 360 ccessory Teeth per MS355, EM Grounding Spring on Plug only 3 ccessory Teeth, EM Grounding Spring on Plug only Step 6. lternate Finish or without D E Y76 Y85 Y86 Y88 Gold per SE S39029* Without contacts 260 C per G.E. M50TF3564, Class, No ccessory Teeth Older style with 200 C Capability - European market (Superseded by Y63) 260 C Capability per G. E. M50TF3564 Class ** 200 C Capability per G. E. M50TF3564 Class ** nother variation available with molding groove for potting - consult for ordering information. EM Filter 83723 26500 505 Crimp Rear 22992 Class L ack- s * Supersedes ML-C-39029 ** lso see Hermetic styles that meet G.E. specification M50TF3564, Classes & on page 38. Options Others 375
EM Filter 83723 505 26500 Options ack- 22992 Others s Class L Crimp Rear ML-DTL-83723, Series, How to Order oeing Designation (CC63CM/CN*) or Commercial Equivalent. 2. 3. 4. 5. 6. 7. 8. oeing Spec. Qualified Step. oeing Co. Designation Modification (ccessory Teeth) oeing Spec. Qualified nsert rrangement lternate Keying Position of Without Option ML-DTL-83723, Connector Series Type Style Style OENG CO. DESGNTON CC63 CM 8 4 P 8 CC63 ML-DTL-83723 Series oeing Designation CC63CM/CN** Firewall (Refer to military specification slash sheet number.) ** CC63CM/CN supersedes CC63R/T Step 2. Select a Connector Type CM CN ML-DTL-83723, Series PYLE COMMERCL EQUV. TO OENG CC63CM/CN Connector Type Threaded, Non-Decoupling Plug Stainless Steel Firewall Threaded, Square Flange Receptacle, Stainless Steel Firewall Step 5. Select a oeing Specification Qualified nsert rrangement 2-03, 4-04, 4-07, 6-0, 8-4, 20-6, 22-9, 24-30, 28-42 (these incorporate oeing approved contacts) Step 6. Select a Type (Crimp) Step 7. Select an lternate Keying Position - Rotation of master key/keyway of shell. Use N for normal. Use 6, 7, 8, 9 or Y for alternate keying positions. See page 37 for descriptions.. 3. 4. 5. 6. 7. 8. Style Modification (ccessory Teeth) Step 3. Select a oeing Specification Qualified 2, 4, 6, 8, 20, 22, 24, 28 Step 4. Select a Modification ccessory Teeth per ML-DTL-83723, Series (normally 3 teeth) 360 ccessory Teeth per MS355 Plug and Receptacle D P S 360 ccessory Teeth per MS355,EM Grounding Spring on Plug only Pin, Gold plate per SE S39029* Socket, Gold plate per SE S39029* Step 8. Without Option / nsert rrangement Step. Commercial Connector Type Designed to be Equivalent to oeing CC63 SK Threaded with O ring seal in receptacle Step 2. Select a Style Step 4. Select a & nsert rrangement from chart on pg. 37. s 2, 4, 8, 20, 24, 28 are available. size and insert arrangement are written together. First number represents, second number is the nsert rrangement. Step 5. Select a Type (Crimp) P S Type Pin Socket lternate Finish or Without lternate Keying Position of Variation SK -2 E 8-4 P D 08 XXX Without and Sealing Plugs (Letter to be used on purchase orders only, and will not appear on connector as part of connector part number). *Supersedes ML-C-39029-2 Threaded, Non-Decoupling Plug Stainless Steel Firewall Threaded, Square Flange Receptacle, Stainless Steel -7 Firewall Step 3. Select a Modification No designation needed for shells with accessory teeth per ML-DTL-83723, Series (normally 3 teeth). E F 360 ccessory Teeth per MS355 Plug and Receptacle 360 ccessory Teeth per MS355, EM Grounding Spring on Plug only Step 6. lternate Finish or without D E Gold per SE S39029* Without contacts and sealing plugs Step 7. Select an lternate Keying Position - Rotation of master key/keyway of shell. Omit for N for normal. Use 06, 07, 08, 09 or Y for alternate keying positions. See page 37 for descriptions. Step 8. Variation Y26 Marking per ML-DTL-83723/33 & /34 (Required with CC63CM/CN Series) No variation suffix - connector will incorporate Mil-Spec S39020 contacts 376
ML-DTL-83723, Series, How to Order SD Designation ML-DTL-83723, Series. 2. 3. 4. 5. 6. Connector Type Service Class Style /nsert rrangement Step. Select an SD Designated/European Standards Connector Type Style lternate Keying Position of SD DESGNTON EN2997 KE 6 6-24 F 6 EN2997 SD Designation Note: SD supersedes ECM Designation Step 2. Select a Service Class Standard Temperature Class K Threaded, Stainless Steel, 200 C S Threaded, Stainless Steel, EM Grounding Spring on Plug, 200 C Y Stainless Steel Hermetic with Solderwell, 200 C Temperature Class KE Threaded, Stainless Steel Firewall, 260 C SE Threaded, Stainless Steel, EM Grounding Spring on Plug, 260 C YE Stainless Steel Hermetic with Solderwell, 260 C EM Filter Step 3. Select a Style 0 Threaded, Square Flange Receptacle Threaded, Solder Mount Receptacle, Hermetic only 6 Threaded Non-Decoupling Plug 7 Threaded Jam Nut (D-Hole Mount) Receptacle Step 4. Select a & nsert rrangement from chart on pg. 37. First number represents, second number is the nsert rrangement. Step 5. Select a Type (Crimp) M C F D Standard Pin #20 Pins with #8 crimpwell Pin nsert less Standard Socket #20 Sockets with #8 crimpwell Socket nsert less Step 6. Select an lternate Keying Position - Rotation of master key/keyway of shell. Use N for normal. Use 6, 7, 8, 9 or Y for alternate keying positions. See page 37 for descriptions. 83723 26500 505 Crimp Rear 22992 Class L ack- s Options Others 377
EM Filter 83723 505 26500 Options ack- 22992 Others s Class L Crimp Rear ML-DTL-83723, Series PYLE COMMERCL DESGNED TO MEET SD & EUROPEN STDS. T J ML-DTL-83723, Series, How to Order Commercial Equivalents to SD Designation/European Standards. 2. 3. 4. 5. 6. 7. 8. 9. Connector Type Service Class Style Modification (ccessory Teeth) / nsert rrangement Type lternate Finish or Without lternate Keying Pos. of T G -2 E 8-4 P D 08 XXX Step. Select a Commercial Connector Type Designed to Meet SD/European Standards Threaded with O ring seal in receptacle Threaded, Stainless Steel, Static/Dynamic Seal in receptacle Step 2. Select a Service Class G K Stainless steel Stainless steel Firewall Step 3. Select a Style -2 Threaded, Non-Decoupling Plug -7 Threaded, Square Flange Receptacle -9 Threaded, Jam Nut (D-Hole Mount) Receptacle Step 4. Select a Modification No designation needed for shells with accessory teeth per ML-DTL-83723, Series (normally 3 teeth). E F 360 ccessory Teeth per MS355 Plug and Receptacle 360 ccessory Teeth per MS355, EM Grounding Spring on Plug only Step 5. Select a & nsert rrangement from chart on pg. 37. First number represents, second number is the nsert rrangement. Step 6. Select a Type (Crimp) P S Pin Socket Variations Step 7. lt. Finish or without D E Gold per SE S39029* Without contacts Step 8. Select an lternate Keying Position - Rotation of master key/keyway of shell. Use N for normal. Use 06, 07, 08, 09 or Y for alternate keying positions. See page 37 for descriptions. Step 9. Variations (Designed for Meeting European Specifications) Y44 260 C Capability (Euro Market) Y63 200 C Capability (Euro Market) Y75 Older designation superseded by Y44 *Supersedes ML-C-39029 378
ML-DTL-83723, Series, How to Order ESC0/ for SC and Rolls Royce Standards ML-DTL-83723, Series MEETS SOCETY OF RTSH EROSPCE CO./ ROLLS ROYCE STNDRDS ESC0 ESC Step. Select a Connector Type that Meets European Specifications for Society of ritish Co./Rolls Royce Standards Threaded, asic Temperature Connector, 260 C Firewall Threaded, Temperature Connector (260 C Firewall) with 00% Scoop-Proof Recessed Pins Step 2. Select a Service Class Step 4. Select a & nsert rrangement from chart on pg. 37. First number represents, second number is the nsert rrangement.. 2. 3. 4. 5. 6. 7. Connector Type Service Class Style Temperature Class KE Threaded, Stainless Steel Firewall, 260 C SE Threaded, Stainless Steel, EM Grounding Spring on Plug, 260 C YE Threaded, Square Flange Receptacle with 360 ccessory 0 Teeth per MS355 Threaded, Hermetic Solder Mount Receptacle 2 Threaded, Hermetic Square Flange Receptacle 3 Threaded, Hermetic Jam Nut (D-Hole Mount) Receptacle 6 Threaded, Stainless Steel Hermetic with Solderwell, 260 C Step 3. Select a Style Threaded, Non-Decoupling Plug with 360 ccessory Teeth per MS355 / nsert rrangement Step 5. Select a Type (Crimp) P S Type Pin Socket Step 7. Select an lternate Keying Position - Rotation of master key/keyway of shell. Use N for normal. Use 6, 7, 8, 9 or Y for alternate keying positions. See page 37 for descriptions. Step 8. Variations lternate Keying Position of Variations ESC0 KE 0 6-24 S 6 X ll connectors are supplied without contacts except Styles, 2 and 3 O (lpha) asic Connector, no Variations Lockwire Holes on Plug EM Filter 83723 26500 505 Crimp Rear 22992 Class L ack- s Options Others 379
EM Filter 83723 505 26500 Options ack- 22992 Others s Class L Crimp Rear HTK HNK HSK ML-DTL-83723, Series, How to Order Commercial Equivalent to ESC European Specifications Scoop-Proof only. 2. 3. 4. 5. 6. 7. ML-DTL-83723, Series Connector Type Style / nsert rrangement Type Finish lternate Keying Position of Variations COMMERCL HTK 2 6-24 S D 06 XXXX Step. Select a Commercial Connector Type Equivalent to ESC European Specifications Threaded, asic ESC-, Class K (Choice of temperature rating 260 or 200 is in the Variations for this part number). Same as HTK except Electroless Nickel Plated Same as HTK, except this is a special designator for oeing Company Step 2. Select a Style -2-7 Threaded Non-Decoupling Plug with 00% Scoop-Proof Recessed Pins Square Flange Receptacle with 00% Scoop-Proof Recessed Pins Step 3. Select a & nsert rrangement from chart on pg. 37. s 2, 4, 8, 20, 24, 28 are available. size and insert arrangement are written together. First number represents, second number is the nsert rrangement. Step 4. Select a Type (Crimp) P S Pin Socket Step 5. Select a Finish or without D E Gold per S39029* Socket Special Temperature are another option - consult for ordering information. Step 6. Select an lternate Keying Position - Rotation of master key/keyway of shell. Use N for normal. Use 06, 07, 08, 09 or Y for alternate keying positions. See page 37 for descriptions. Step 7. Variations Y44 260 C Y63 200 C *Supersedes ML-C-39029 380
ML-DTL-83723, Series, How to Order Hermetic, Military or Commercial. 2. 3. 4. 5. Connector Style and Type (Crimp) ML-DTL-83723, Connector Service Series Type Class MLTRY HERMETC M83723 /88 y 6-24 6 M83723 Step. Military Connector Type ML-DTL-83723 Series Step 2. Select a Military Hermetic Connector Style / nsert rrangement lternate Keying Position of. 2. 3. 4. 5. 6. 7. 8. Connector / nsert lternate lternate Keying Varia- ML-DTL-83723, Series Style Style rrangement Type Style Finish Position of tions COMMERCL HERMETC TY -7 6-24 S D 06 XXXX (Refer to military specification slash sheet number.) /88 Hermetic, Threaded Square Flange Receptacle /89 Hermetic, Threaded Jam Nut (D-Hole Mount) Receptacle /90 Hermetic, Threaded Solder Mounted Receptacle Step 3. Select a Service Class Y H Hermetic, Stainless Steel, 200 C, with Solderwell Hermetic, Tin Plated Carbon Steel, 50 C For availability of a Plated Steel, consult. Step 4. Select a & nsert rrangement from chart on pg. 37. (Except sizes 24 and 28 are not available in Hermetic Styles.) First number represents, second number is the nsert rrangement Step 5. Select an lternate Keying Position - Rotation of master key/keyway of shell. Use N for normal. Use 6, 7, 8, 9 or Y for alternate keying positions. See page 37 for descriptions. Step. Select a Commercial Hermetic Connector Style TY FY NY Hermetic, Threaded, Stainless Steel, with O ring seal Hermetic, Threaded, Stainless Steel, with Static/Dynamic Seal Hermetic, Threaded, Stainless Steel, Electro-deposited Nickel plated, with Static/Dynamic Seal Step 2. Select a Style -7 Square Flange Receptacle -9 Jam Nut (D-Hole Mount) Receptacle -4 Solder Mounted Receptacle Step 3. Select a & nsert rrangement from chart on pg. 37. (Except sizes 24 and 28 are not available in Hermetic Styles). First number represents, second number is the nsert rrangement Step 4. Select a Type (Crimp) P Pin Step 5. Select a Style Solderwell (Mil-Spec Type) 4 Eyelet Step 6. lternate Finish D V Step 7. Select an lternate Keying Position - Rotation of master key/keyway of shell. Omit for normal. Use 06, 07, 08, 09 or Y for alternate keying positions. See page 37 for descriptions. Step 8. Variations Y44 Y63 Y86 Y88.000050 (per ML-DTL-83723, ) Gold.00000 Gold 260 C Capability (Euro Market) 200 C Capability (Euro Market) 260 C Capability per G.E. M50TF3564, Class 200 C Capability per G.E. M50TF3564, Class EM Filter 83723 26500 505 Crimp Rear 22992 Class L ack- s Options Others 38
ML-DTL-83723, Series, Square Flange Receptacle, Threaded Coupling EM Filter 83723 505 26500 Options ack- 22992 Others s Class L Crimp Rear PRT # M83723/82 / M83723/83 T( )-7 J/J8/N/N8/NK-7 CC63CN SK-7 EN2997( )0 T( )/J( )-7 ESC0( )0 ESC( )0 HTK/HNK/HSK-7 See Quick Reference page 365 for the variety of ordering options for square flange receptacles with threaded coupling. The How to Order pages (374-38) give complete part number breakdowns. ±.005 ±.005 D Dia. F Dia. Rear H ccessory Thread Class 2 sizes 8 and 0 are not available in oeing CC63 styles and commercial ESC styles. ayonet style square flange receptacles are shown on page 385. Hermetic threaded style square flange receptacles are shown on page 388. ll dimensions for reference only. J Coupling Thread Class 2 P Dia. Front nches X Dia. 8.82.594.50.500.5000-20 UNF.5625-24 UNF.562.620 0.937.79.635.625.6250-24 UNEF.6875-24 UNEF.696.748 2.03.82.760.750.7500-20 UNEF.8750-20 UNEF.875.93 4.25.906.885.875.8750-20 UNEF.9375-20 UNEF.936.980 6.250.969.00.000.0000-20 UNEF.0625-8 UNEF.062.07 8.343.062.072.062.0625-8 UNEF.875-8 UNEF.87.209 20.437.56.92.87.875-8 UNEF.325-8 UNEF.32.337 22.562.250.322.32.325-8 UNEF.4375-8 UNEF.437.452 24.703.375.447.437.4375-8 UNEF.5625-8 UNEF.562.577 28.953.562.760.750.7500-8 UNEF.825-6 UNEF.82.827 ±.005 ±.005 When fully mated with plug, this band will be covered. ( is red on military types; can be red or blue on commercial types). D Dia. F Dia. Rear P Dia. Front Millimeters X Dia. 8 20.62 5.09 2.95 2.70 4.27 5.75 0 23.80 8.26 6.3 5.88 7.68 8.99 2 26.9 20.62 9.30 9.05 22.23 23.9 4 28.58 23.0 22.48 22.23 23.77 24.89 6 3.75 24.6 25.65 25.40 26.97 28.2 8 34. 26.97 27.23 26.97 30.5 30.7 20 36.50 29.36 30.28 30.5 33.32 33.96 22 39.67 3.75 33.58 33.32 36.50 36.88 24 43.26 34.93 36.75 36.50 39.67 40.06 28 49.6 39.67 44.70 44.45 46.02 46.4 4 Mounting Holes s 8 to 22.25/.6 3.7/2.94 s 24 & 28.54/.45 3.9/3.68 Fully Mated X Dia. P Dia. Front J Coupling Thread.250 6.35.430 36.32 F Dia. Rear H ccessory Thread.25 3.7 lue ndicates Rear System 3 Teeth Equally Spaced 20 part D Dia. Optional 360 ccessory Teeth 382
ML-DTL-83723, Series, Jam Nut (D-Hole Mount) Receptacle, Threaded Coupling C Hex G Dia. H ccessory Thread Class 2 J Coupling Thread Class 2 V Thread Class 2 PRT # M83723/84 / M83723/85 T( )-9 J/J8/N/N8/NK-9 EN2997( )7 T( )/J( )-9 8.979.828.068.5000-20 UNF.5625-24 UNF.6250-20 UNEF.635.605 0.04.953.92.6250-24 UNEF.6875-24 UNEF.7500-20 UNEF.760.730 2.29.40.380.7500-20 UNEF.8750-20 UNEF.9380-20 UNEF.947.97 4.39.205.505.8750-20 UNEF.9375-20 UNEF.0000-20 UNEF.00.980 6.56.329.630.0000-20 UNEF.0625-8 UNEF.250-8 UNEF.35.05 8.64.455.756.0625-8 UNEF.875-8 UNEF.2500-8 UNEF.260.225 20.766.574.860.875-8 UNEF.325-8 UNEF.3750-8 UNEF.385.350 22.954.705 2.068.325-8 UNEF.4375-8 UNEF.5000-8 UNEF.50.475 24 2.074.830 2.60.4375-8 UNEF.5625-8 UNEF.6250-8 UNEF.635.600 28 2.329 2.080.7500-8 UNEF.825-6 UNEF.8750-20 UNEF.885.850 G Dia. C When fully mated with plug, this band will be covered. ( is red on military types; can be red or blue on commercial types). C Hex G Dia. Y Dia. ±.3 Z Flats ±.3 8 24.87 2.03 27.3 6.3 5.37 0 28.04 24.2 30.28 9.30 8.54 2 32.79 28.96 35.05 24.05 23.29 4 35.33 30.6 38.23 25.65 24.89 6 38.5 33.76 4.40 28.83 28.07 8 4.68 36.96 44.60 32.00 3.2 20 44.86 39.98 47.24 35.8 34.29 22 49.63 43.3 52.53 38.35 37.47 24 52.68 46.48 80.26 4.53 40.64 28 59.6 52.83 47.88 46.99 J Coupling Thread Z Flats.430 36.32.78 9.83 3 Teeth Fully Mated Y Dia. Cutout Hole ( Thickness.25/.062 3.8/.57) V Thread Millimeters lue ndicates Rear System Equally Spaced 20 part H ccessory Thread Optional 360 ccessory Teeth See Quick Reference page 366 for the variety of ordering options for jam nut (D-hole mount) receptacles with threaded coupling. The How to Order pages (374-38) give complete part number breakdowns. Y Dia. ±.005 Z Flats ±.005 nches EM Filter 83723 26500 505 Crimp Rear 22992 Class L ack- s No oeing Designated jam nut receptacles. ayonet style jam nut receptacles shown on page 386. Hermetic threaded style jam nut receptacles shown on page 389. ll dimensions for reference only. Options Others 383
ML-DTL-83723, Series, Straight Plug and Non-Decoupling Plug,Threaded Coupling EM Filter 83723 505 26500 Options ack- 22992 Others s Class L Crimp Rear Straight Plug S Dia. When fully mated with receptacle, this band will be covered. ( is red on military types; can be red or blue on commercial types). H ccessory Thread Class 2 J Coupling Thread Class 2 S Dia. S2 Dia. 8.5000-20 UNF.5625-24 UNF.776.832 0.6250-24 UNEF.6875-24 UNEF.906.958 2.7500-20 UNEF.8750-20 UNEF.078.090 4.8750-20 UNEF.9375-20 UNEF.4.203 6.0000-20 UNEF.0625-8 UNEF.266.326 8.0625-8 UNEF.875-8 UNEF.375.432 20.875-8 UNEF.325-8 UNEF.500.557 22.325-8 UNEF.4375-8 UNEF.625.682 24.4375-8 UNEF.5625-8 UNEF.750.87 28.7500-8 UNEF.825-6 UNEF 2.000 2.22 S Dia. Fully Mated J Coupling Thread Non-Decoupling Plug S2 Dia. Fully Mated J Coupling Thread Millimeters S2 Dia. 8 9.7 2.3 0 23.0 24.33 2 27.38 27.68 4 28.98 30.55 6 32.5 33.68 8 34.92 36.37 20 38.0 39.54 22 4.27 42.72 24 44.45 46.5 28 50.80 53.89 ll dimensions for reference only..370 34.79.370 34.79 H ccessory Thread H ccessory Thread 3 Teeth Equally Spaced 20 part Optional 360 ccessory Teeth 3 Teeth Equally Spaced 20 part Optional 360 ccessory Teeth nches sizes 8 and 0 are not available in oeing CC63 styles and commercial ESC styles. oeing designations are in non-decoupling plugs only; not in straight plug designations. SD and European/ESC0 or ESC are in non-decoupling plugs only, not in straight plug designations. ayonet style straight plugs shown on page 387. ayonet style non-decoupling plugs are not available. PRT # STRGHT PLUG M83723/86 / M83723/87 T( )- J/J8/N/N8/NK- See Quick Reference page 367 for the variety of ordering options for straight plugs with threaded coupling. The How to Order pages (374-38) give complete part number breakdowns. PRT # NON-DECOUPLNG PLUG M83723/95 / M83723/96 M83723/97 / M83723/98 T( )-2 J/J8/N/N8/NK-2 CC63CM SK-2 EN2997( )6 T( )/J( )-2 ESC0( )6 ESC( )6 HTK/HNK/HSK-2 See Quick Reference page 367 for the variety of ordering options for non-decoupling plugs with threaded coupling. The How to Order pages (374-38) give complete part number breakdowns. 384