CONTENTS HIGH BAY Acrylume Acrylic...402, 410 Hi-Tek Aluminum...403-405, 407, 411-413 Contractor Select Stock...406 DuraBay Glass... 408-409, 414 LOW BAY Acrylume Acrylic... 415-416, 421, 425 Hi-Tek Aluminum...417-419, 422-424 Contractor Select Stock...420 GENERAL AREA LIGHTING 2 x2 Recessed Squares... 426-427 CONTROL SYSTEMS Multi-Level Lighting... 428-430 TECHNICAL INFORMATION... 431-432 OPTIONS & ACCESSORIES... 433-439 401
HIGH BAY PRODUCT INFORMATION TH PA 22 TH PA25 Acrylume TH PA22 TH PA25 For high mounting heights that require higher efficiencies, general horizontal/high vertical illumination and premium contrast control. Ideal for light manufacturing areas, warehouses and retail aisles. Certain airborne contaminants can diminish integrity of acrylic. Refer to Acrylic Environmental Compatibility tables on pages 794-795 for suitable uses. Housing: Heavy-duty, diecast aluminum halves. Ballast and electrical components are heat-sinked and horizontally opposed for cooler operation. Integral splice box mounting flange ensures structural integrity. Electrostatically applied white polyester powder paint. UV stabilized, high efficiency, high performance acrylic reflector yields high vertical footcandles while maintaining low brightness. Optical assembly is fully adjustable and accommodates a range of light distributions. Selfcleaning, ventilated design carries contaminants out top of reflector. Coated lamps provide optimum performance. PA22 and PA25: 20% uplight PA22E: Enclosed, 15% uplight, clear tempered lens. Hinged and latched for easy maintenance. PA22N: 18% uplight. Ballast: All ballasts are 100% factory tested. HPS: Constant wattage autotransformer. MH: 175-450W fixtures shipped within the U.S. require super CWA pulse start ballasts which are 88% efficient and EISA-legislation compliant (must specify SCWA option). CSA, NOM or INTL options required for probe start shipments outside the U.S. 1000W is constant wattage autotransformer. "PINK" socket with screw shell and center contact. For use with O-rated, protected metal halide : Pendant splice box threaded for 3/4" conduit (standard). Pendant splice box removable cast-aluminum box slides on integral die-cast aluminum housing mounting flange and mounts to 3/4" pendant conduit prior to ballast housing installation. Matching wire access cover accepts RELOC modular wiring. Complete assembly meets or exceeds UL 50-pound pull test. Other mounting options available. Acrylume Acrylic Optical mounting: Adjustable reflector mounting brackets are progressively die-formed of 18-gauge galvanized steel. For areas where reflectors are subject to impact (gymnasiums, etc.) To protect reflector from breakage; use full wire guard (FWG) option for areas where reflectors are susceptible to impact. PA22, PA22N: UL Listed -30 C to 55 C ambient operations and damp locations. PA22E, PA25: UL Listed -30 C to 40 C ambient operations and damp locations. All are UL Listed to U.S. and NOM Certified. ORDERING INFORMATION For shortest lead times, configure products using bolded options. Example: TH 400MP PA22 TB SCWA Series Lamp type 8 Reflector 8 Voltage Ballast Options TH Protected metal halide 450MP PA22 TB 7 For options and accessories, see pages 433-439. 175MP 875MP PA22N For shipments to U.S. territories, SCWA must be specified to comply with EISA. 200MP 1000MP PA22L 1 208 3,4 SCWA Super constant wattage autotransformer 250MP High pressure sodium PA22E 2 240 3,4,5 RLB Regulated lag ballast (175-400W) 250S PA25 Non EISA ballast 400S 347 (blank) Standard magnetic ballast 6,9 400MP 1000S 480 3,4 SCWI Isolated SCWA (400W) 6,10 CWI Constant wattage isolated 6,9 MRB Magnetic regulator ballast REFLECTOR PA22, PA22N, PA22E, PA22L PA25 CONFIGURATIONS LAMP TYPE 175MP, 200MP, 250MP,,, 400MP, 450MP, 250S, 400S 875MP, 1000MP, 1000S 24-1/4 to 27-1/4 (61.6 to 69.2) 23-1/8 to 26-1/8 (58.7 to 66.4) 22-3/8 (56.8) TH PA22 13-1/2 (34.3) 25-7/8 (65.7) TH PA25 14-1/4 (36.2) 1 Lensed bottom, open top. Periodic cleaning maintains performance. Does not meet UL lamp rupture containment. 2 Enclosed bottom, open top. Meets UL lamp rupture containment standards Periodic cleaning maintains performance. 3 Requires CWI or RLB option in Canada for metal halide. Available in 175-400W. 4 Requires CWI or MRB option in Canada for high pressure sodium. Available 70-400W. 5 220V and 240V, 50Hz and 60Hz ballasts available for use with U.S. protected metal halide lamps. 6 Available for shipments outside of U.S. only. 7 Optional multi-tap ballast (12OV, 208V, 247V, V; V, V, 347V in Canada.) 8 Specify lamp type and reflector; see Configurations table. 9 175-450W metal halide only. 10 400W metal halide only. 402 1-800-315-4963 www.lithonia.com
PRODUCT INFORMATION For high mounting heights that require high efficiencies, horizontal illumination and premium glare control. Ideal for manufacturing areas and aisles. Housing: Rugged, heavyduty, die-cast aluminum with white polyester powder finish. components horizontally opposed and heat-sinked to ballast housing for cool operation. Premium-spun aluminum, anodized reflector combines high efficiency with extended shielding angles for high performance. Exclusive fluted design minimizes arc tube voltage rise. Optical system is adjustable and accommodates the full range of industrial light distributions. Self-cleaning, ventilated design carries optical contaminants out through open top of reflector. Ballast: All ballasts are 100% factory tested. HPS: Constant wattage autotransformer. MH: 175-450W fixtures shipped within the U.S. require super CWA pulse start ballasts which are 88% efficient and EISA-legislation compliant (must specify SCWA option). CSA, NOM or INTL options required for probe start shipments outside the U.S. 1000W is constant wattage autotransformer. "PINK" socket with screw shell and center contact. For use with O-rated, protected metal halide Pendant splice box threaded for 3/4" conduit (standard). Pendant splice box, removable cast-aluminum box slides on integral die-cast aluminum housing mounting flange and mounts to 3/4" pendant conduit prior to ballast housing installation. Matching wire access cover accepts RELOC modular wiring. Complete assembly meets or exceeds UL50-pound pull test. Other mounting options available. Optical mounting: Adjustable reflector mounting brackets are progressively die-formed of 18-gauge galvanized steel. A17: UL Listed -30 C to 55 C ambient operations and damp locations. High ambient (HA) option of 65 C available. A22: UL Listed -30 C to 55 C ambient operations and damp locations. High ambient (HA) option of 65 C available. 875W and 1000W pulse start -30 C to 40 C. All are UL Listed to U.S. and NOM Certified. TH A22 Hi-Tek Aluminum T H A17 TH A22 Hi-Tek TH A17 HIGH BAY ORDERING INFORMATION For shortest lead times, configure products using bolded options. Example: TH 400MP A17 TB SCWA Series Lamp type 6 Reflector 6 Voltage Ballast Options TH Protected metal halide 175MP High pressure sodium 70S A17 A22 TB 4 For shipments to U.S. territories, SCWA must be specified to comply with EISA. For options and accessories, see pages 433-439. 200MP 100S 208 1,2 SCWA Super constant wattage autotransformer 250MP 150S 240 1,2,3 RLB Regulates lag ballast 200S Non-EISA ballast 250S 347 (blank) Standard magnetic ballast 5,7 400MP 400S 480 1,2 SCWI Isolated SCWA 5,8 450MP 1000S CWI Constant wattage isolated 5,7 875MP 1000MP MRB Magnetic regulator ballast REFLECTOR A17 A22 CONFIGURATIONS LAMP TYPE 175MP, 200MP, 250MP,,, 400MP, 450MP, 70S, 100S, 150S, 200S, 250S, 400S 875MP, 1000MP, 100S, 150S, 200S, 250S, 400S, 1000S 21-5/8 to 24-5/8 (55.0 to 62.5) 21-5/8 to 24-5/8 (55.0 to 62.5) 12-1/8 (30.8) 12-1/4 (31.1) 17-7/8 (45.4) TH A17 23-1/4 (59.1) TH A22 1 Requires CWI or RLB option in Canada for metal halide. Available in 175-400W. 2 Requires CWI or MRB option in Canada for metal halide. Available in 70-400W. 3 220V and 240V, 50Hz and 60Hz ballasts available for use with U.S. protected metal halide lamps. 4 Optional multi-tap ballast (V, 208V, 240V, V; V, V, 347V in Canada.) 5 Available for shipments outside of U.S. only. 6 Specify lamp type and reflector; see Configurations table. 7 175-450W metal halide only. 8 400W metal halide only. www.lithonia.com 1-800-315-4963 403
HIGH BAY PRODUCT INFORMATION TH A16 TH A16GL THD A16 Hi-Tek TH A16 / THD A16 TH A16GL Use in high mounting heights that require high efficiencies and horizontal illumination. Ideal for general manufacturing areas, storage areas and warehouse aisles where color is critical. THD distributor packs consist of ballast housing, reflector, door lens and lamp together in one carton. Housing: Heavy-duty, diecast aluminum halves. Ballast and electrical components are heat-sinked and horizontally opposed for cooler operation. Integral splice box mounting flange ensures structural integrity. Electrostatically applied white polyester powder paint. High-efficiency, anodized, spun aluminum reflector with exclusive fluted design that minimizes arc-tube voltage rise for optimal lamp life. Open A16 opticals are self cleaning with a ventilated design that carries contaminants out through top of reflector. Lensed A16GL optical features a gasketed clear tempered glass lens with hinge and stainless steel latches for easy tool-less access. Optical system is adjustable and accommodates the full range of light distributions. Ballast: All ballasts are 100% factory tested. HPS: Constant wattage autotransformer. MH: 250-450W fixtures shipped within the U.S. require super CWA pulse start ballasts which are 88% efficient and EISA-legislation compliant (must specify SCWA option). CSA, NOM or INTL options required for probe start shipments outside the U.S. "PINK" socket with screw shell and center contact. For use with O-rated, protected metal halide : Pendant splice box threaded for 3/4" conduit (standard). Pendant splice box, removable cast-aluminum box slides on integral die-cast aluminum housing mounting flange and mounts to 3/4" pendant conduit prior to ballast housing installation. Matching wire access cover accepts RELOC modular wiring. Complete assembly meets or exceeds UL 50-pound pull test. Other mounting options available. Optical mounting: Adjustable reflector mounting brackets are progressively Hi-Tek Aluminum die-formed of 18-gauge galvanized steel. THD: UL Listed -30 C to 55 C ambient operations and damp locations. TH A16 and TH A16GL: High ambient (HA option) of 65 C available. UL Listed to U.S. and NOM Certified. ORDERING INFORMATION For shortest lead times, configure products using bolded options. Example: TH 400MP A16 TB SCWA Series Lamp type Reflector Voltage Ballast Options TH THD 1 Protected metal halide 200MP 250MP 400MP High pressure sodium 70S 100S 150S 200S 250S 400S A16 TB 6 A16GL 2 208 3,4 240 3,4,5 347 480 3,4 For shipments to U.S. territories, SCWA must be specified to comply with EISA. SCWA Super constant wattage autotransformer RLB Regulated lag ballast Non-EISA ballast (blank) Standard magnetic ballast 7,8 SCWI Isolated SCWA 7,9 CWI Constant wattage isolated 7,8 MRB Magnetic regulator ballast For options and accessories, see pages 433-439. H THD 1 D TH A16-THD A16 TH A16GL Diameter: 16-3/8 (41.6) 17-3/4 (45.0) Reflector height: 9-5/8 (24.4) 10-1/4 (26.0) Height: 19 to 22 (48.2 to 55.9) 19-5/8 to 22-5/8 (49.8 to 57.5) R 1 THD consists of TH housing and A16 reflector shipped in one carton. Available with 400MP SCWA tapped ballast only. 2 Lens cannot be field installed on open A16. 3 Requires CWI or RLB option in Canada for metal halide. Available in 175-400W. 4 Requires CWI or MRB option in Canada for high pressure sodium. Available 70-400W. 5 220V and 240V 50Hz and 60Hz ballast available for use with U.S. metal halide lamps. 6 Optional multi-tap ballast (, 208, 240 V; V, V, 347V in Canada.) 7 Available for shipments outside of U.S. only. 8 175-400W metal halide only. 9 400W metal halide only. 404 1-800-315-4963 www.lithonia.com
PRODUCT INFORMATION Use in high mounting heights that require high efficiencies, horizontal illumination and high vertical illumination. Ideal for manufacturing and warehouse aisles where color is critical. Housing: Rugged, heavyduty, die-cast aluminum with white polyester powder finish. components horizontally opposed and heat-sinked to ballast housing for cooler operation. Integral splice box mounting flange ensures structural integrity. Self- cleaning ventilated design carries contaminants through the top of the reflector. A14: One piece hydroformed, anodized aluminum reflector provides rectangular distribution for maximum luminaire spacing and vertical illumination. A15: High-efficiency, anodized, spun aluminum reflector features exclusive contoured design. Ballast: All ballasts are 100% factory tested. HPS: Constant wattage autotransformer. MH: 175-450W fixtures shipped within the U.S. require super CWA pulse start ballasts which are 88% efficient and EISA-legislation compliant (must specify SCWA option). CSA, NOM or INTL options required for probe start shipments outside the U.S. "PINK" socket with screw shell and center contact. Pendant splice box: Removable cast-aluminum box slides on integral die-cast aluminum housing mounting flange and mounts to 3/4" pendant conduit prior to ballast housing installation. Matching wire access cover accepts RELOC modular wiring. Complete assembly meets or exceeds UL 50- pound pull test. Optic mounting adjustable reflector mounting brackets are progressively die-formed of 18-gauge galvanized steel. UL Listed -30 C to 55 C ambient operations and damp locations. High ambient (HA option) of 65 C available. (HA not available on THD A15). UL Listed to U.S. and NOM Certified. TH A14 Hi-Tek Aluminum T H A14 T H A15 THD A15 Hi-Tek HIGH BAY TH A15 / THD A15 ORDERING INFORMATION For shortest lead times, configure products using bolded options. Example: TH 400MP A15 TB SCWA Series Lamp type Reflector Voltage Ballast Options TH THD 1 Protected metal halide 175MP 200MP 250MP 400MP 450MP High pressure sodium 70S 100S 150S 200S 250S 400S A14 A15 TB 5 208 2,3 240 2,3,4 347 480 2,3 For shipments to U.S. terrirtories, SCWA must be specified to comply with EISA. SCWA Super constant wattage autotransformer RLB Regulated lag ballast Non-EISA ballast (blank) Standard magnetic ballast 6,7 CWI Constant wattage isolated 6,7 MRB Magnetic regulator ballast SCWI Isolated SCWA 6,8 For options and accessories, see pages 433-439. 17-1/8 to 19-1/8 (43.5 to 48.6) 17-5/8 to 20-5/8 (44.7 to 52.4) 13-5/8 (34.6) TH A14 8-1/8 (20.6) 14-1/8 (35.9) TH A15 / THD A15 8-1/4 (30.8) 1 THD consists of TH housing and A15 reflector shipped in a carton. Available with 400MP tapped ballast only. SCWA only. 2 Requires CWI or RLB option in Canada for metal halide. Available for 175-450W only. 3 Requires CSI or MRB option in Canada for high pressure sodium. Available for 70-400W only. 4 220V and 240V 50Hz and 60Hz ballasts available for use with U.S. protected metal halide and high pressure sodium lamps. 5 Optional multi-tap ballast (V, 208V, 240V, V; V, V, 347V in Canada). 6 Available for shipments outside of U.S. only. 7 175-450W metal halide only. 8 400W metal halide only. www.lithonia.com 1-800-315-4963 405
HIGH BAY PRODUCT INFORMATION HID HIGH BAY HID WORK LIGHT CHD CHD: Open HID high bay fixture with anodized aluminum high bay reflector. Use in areas that require high efficiencies and horizontal illumination with mounting heights of 20 feet and higher. Ideal for use in light manufacturing areas, storage areas and ware-house aisles. CTL: HID worklight with steel safety cage for use as a temporary light source. Ideal for use in new contruction and during renovation of interior spaces. Compatible with existing optical assemblies for CXD and CHD fixtures. CHD: Durable die-cast aluminum housing in a compact design with smooth contours and electro-statically applied white polyester powder paint. Ballast and electrical components are fully contained and heat-sinked within the housing. Steel hook with spring steel latch on removable pendant splice box is standard. Convenient side knockout entries in splice box allow for easy wiring. Hook is easily removed for conduit pendant mounting. CTL: Safety cage protects the lamp while allowing maximum light output in the space. Durable die-cast aluminum housing in a compact design with smooth contours and electro-statically applied white polyester powder paint. Ballast and electrical components are fully contained and heat-sinked within the housing. Steel hook with spring steel latch on removable pendant splice box is standard. Convenient side knockout entries in splice box allow for easy wiring. Hook is easily removed for conduit pendant mounting. CHD: Anodized spun aluminum 15" reflectors feature an exclusive contour design for superior uniformity and high efficiency. Self-cleaning top with ventilated design carries contaminants out the top of reflector. CTL: Lamp is 400W mogul base, ED37 or similar, type "O" protected metal halide. Contractor Select Stock Ballast: Pulse start, 100% factory-tested high power factor. Meets and exceeds the minimum energy efficiency required by the Energy Independence and Security Act of 2007 (EISA). Must specify PPSL. "PINK" socket with screw shell and center contact. For use with O-rated, protected metal halide UL Listed to U.S. and Canadian standards for 30 C to 50 C ambient operations and damp locations. CTL ORDERING INFORMATION CATALOG NUMBER CHD400PPSL CHD400PL CSA CTL 400PPSL DESCRIPTION 1 Ballast housing containing 400W MH pulse start ballast, protected exclusionary PINK socket, mounting legs, 400W MH protected pulse start lamp, reflector legs, 15" reflector and hook with pendant splice box. Ballast housing containing 400W MH probe start ballast, protected exclusionary PINK socket, mounting legs, 400W MH protected probe start lamp, reflector legs, 15" reflector and hook with pendant splice box. Ballast housing containing 400W MH pulse start ballast, protected exclusionary PINK socket, mounting legs, 400W M protected pulse start lamp,outer cage and hook with pendant splice box. DIMENSIONS (L X W X D, INCHES) FIXTURE WEIGHT (LBS.) PALLET QUANTITY 14-3/4" x 14-3/4" x 15-3/4" 21.32 18 14-3/4" x 14-3/4" x 15-3/4" 21.32 18 24-1/4" x 9-7/8" x 8-1/4" 21.2 32 COMPONENT PARTS CHCX400PPS HSG A15 DESCRIPTION 1 Housing with 400W protected socket, pendant splice box, steel hook and reflector legs. Works with either CHD or CXD optical. 15 inch spun aluminum reflector. 22-1/8 (56.2) 24-1/4 (61.6) 14-1/8 (35.9) CHD 9-7/8 (25.1) CTL 1 Canadian products ship with standard probe start ballast. 406 1-800-315-4963 www.lithonia.com
PRODUCT INFORMATION For high-mounting heights that require high efficiencies, horizontal illumination, premium glare control and total enclosure. Ideal for heavy manufacturing areas, gymnasiums and wet location applications (Must be ordered with WL option). Housing: Rugged, heavyduty, die-cast aluminum with white polyester powder finish. components are horizontally opposed and heat-sinked to ballast housing for cool operation. One-piece, totally enclosed-and-gasketed spun aluminum, anodized reflector combines high efficiency with extended shielding angle for high-performance optical control. Exclusive fluting design minimizes arc tube voltage rise. Gasketed, clear, tempered-glass lens inhibits the entrance of ambient contaminants. Hinge and lens retainer latches for tool-less access. Ballast: All ballasts are 100% factory tested. HPS: Constant wattage autotransformer. MH: 175-400W fixtures shipped within the U.S. require super CWA pulse start ballasts which are 88% efficient and EISA-legislation compliant (must specify SCWA option). CSA, NOM or INTL options required for probe start shipments outside the U.S. 1000W is constant wattage autotransformer. mogul base socket with copper alloy, nickel-plated screw shell and center contact. UL Listed 1500W, 600V, 5KV pulse rated for U.S. lamps. Pendant splice boxremovable cast-aluminum box slides on integral die-cast aluminum housing mounting flange and mounts to 3/4" pendant conduit prior to ballast housing installation. Matching wire access cover accepts RELOC modular wiring. Complete assembly meets or exceeds UL 50-pound pull test. Optical mounting: four 8-32 corrosion-resistant, tri-lobular, thread-rolling screws are arranged concentrically around the lamp socket. Optic is sealed at the point of attachments with a one-piece gasket of FDA -approved material. A 16-gauge galvanized steel support ring with matching keyhole slots is pre-installed for vibrationresistant mounting. UL Listed to U.S. and Canadian safety standards. NOM Certified. UL Listed for damp locations. Ambient operation: -30 C to 55 C (high ambient HA option for 65 C). 750W, 875W and 1000W pulse-start -30 C to 40 C. TE E22 Hi-Tek Aluminum T E E17 TE E22 Hi-Tek TE E17 HIGH BAY ORDERING INFORMATION For shortest lead times, configure products using bolded options. Example: TE 400M E17 M TB SCWA Series Lamp type 6 Reflector 6 Distribution 6 Voltage TE Metal halide 400M High pressure sodium E17 N Narrow TB 4 175M 750M 70S E22 C Concentrated 200M 875M 100S M Medium 208 1,2 250M 1000M 150S S Spread 240 1,2,3 320M 350M 200S 400S W Wide 347 480 1,2 Ballast For shipments to U.S. territories, SCWA must be specified to comply with EISA. SCWA Super constant wattage autotransformer RLB Regulated lag ballast Non-EISA compliant (blank) Standard magnetic ballast 5,7 CWI Constant wattage isolated 5,7 SCWI Isolated SCWA 5,8 MRB Magnetic regulator ballast Options For options and accessories, see pages 433-439. CONFIGURATIONS REFLECTOR LAMP TYPE DISTRIBUTION E17 70S, 100S, 150S, 200S, 175M, 200M, 250M C, M, S, W E17 320M, 350M, 400M, 400S M, S, W E22 350M, 400M, 750M, 875M, 400S N, C E22 1000M C, M, S 17-7/8 (45.4) TE E17 17-3/8 (44.1) 24-3/8 (61.9) 23 (58.4) TE E22 17-3/8 (44.1) 24-3/8 (61.9) 1 Requires CWI or RLB option in Canada for metal halide. Available for 175-450W only. 2 Requires CWI or MRB option in Canada for high pressure sodium. Available for 70-400W only. 3 220V and 240V 50Hz and 60Hz ballasts available for use with U.S, protected metal halide and high pressure sodium lamps. 4 Optional multi-tap ballast (V, 208V, 240V, V; V, V, 347V in Canada). 5 Available for shipments outside of U.S. only. 6 Specify lamp type and reflector; see Configurations table. 7 175-400W metal halide only. 8 400W metal halide only. www.lithonia.com 1-800-315-4963 407
HIGH BAY PRODUCT INFORMATION TPG PG16A TPG PG21A TPG PG16 TPG PG21 DuraBay For high mounting heights that require high efficiencies, horizontal and vertical illumination, and premium contrast control. Optimum performance for high ambient temperatures and dirty environments. Ideal for heavy manufacturing areas, warehouses and retail aisles. Housing: Rugged, heavyduty, die-cast aluminum with white polyester powder finish. components horizontally opposed and heat-sinked to ballast housing for cooler operation. PG16 and PG21: Highefficiency, high-performance, heat-resistant borosilicate glass reflector mounted within heavy-gauge rigid wire form rings and rods fitted to top and bottom of reflector. Yields high vertical footcandles with low brightness and excellent contrast control. Self-cleaning, ventilated design carries optical contaminants out through top of reflector. PG16A and TPG21A: Glass reflector with aluminum shroud to protect glass prisms from oily dirt accumulation, emphasizing downward efficiency. Ballast: All ballasts are 100% factory tested. HPS: Constant wattage autotransformer. MH: 175-450W fixtures shipped within the U.S. require super CWA pulse start ballasts which are 88% efficient and EISA-legislation compliant (must specify SCWA option). CSA, NOM or INTL options required for probe start shipments outside the U.S. 1000W is constant wattage autotransformer. "PINK" socket with screw shell and center contact. For use with O-rated, DuraBay Glass protected metal halide : Cast-aluminum pendant splice box threaded for 3/4" conduit (standard). Other mounting options available. UL Listed to U.S. and NOM Certified. UL Listed for damp locations. Ambient operation: -30 C to 55 C (high ambient HA option for 65 C). 875W and 1000W pulse start -30 C to 40 C. TPG PG21 TPG PG16 ORDERING INFORMATION For shortest lead times, configure products using bolded options. Example: TPG 400MP PG16 M TB SCWA Series Lamp type 6 Reflector 6 Distribution 6 Voltage TPG Protected metal halide 875MP PG16 N Narrow TB 3 175MP 1000MP PG21 C Concentrating 200MP High pressure sodium PG16A M Medium 208 1,2 250MP 150S PG21A S Spread 240 1,2 200S W Widespread 250S N21 Narrow 347 5 400MP 400S C21 Concentrating 480 1,2 450MP 1000S M21 Medium (1000S only) TBV 4 Ballast For shipments to U.S. territories, SCWA must be specified to comply with EISA. SCWA Super constant wattage autotransformer RLB Regulated lag ballast Non-EISA ballast (blank) Standard magnetic ballast 5,7 CWI Constant wattage isolated 5,7 MRB Magnetic regulator ballast SCWI Isolated SCWA 5,8 Options For options and accessories, see pages 433-439. CONFIGURATIONS REFLECTOR LAMP TYPE DISTRIBUTION PG16 175MP, 200MP, 250MP,, 400MP, 450MP, 150S N, C, M, S, W PG16 200S, 250S, 400S C, M, S, W PG16A 150S N, C, M, S, W PG16A 175MP, 200MP, 250MP,, 400MP, 450MP200S, 250S, 400S C, M, S, W PG21 200MP,, 400MP, 450MP M21 PG21 875MP, 1000MP, 400S C21 PG21 1000S N21 PG21A, 400MP, 450MP N21 17-1/4 PG21A 875MP, 1000MP, 400S C21 (44.3) PG21A 1000S M21 TPG PG16 10-1/2 (26.7) 26 (66.0) 22-1/2 (57.2) TPG PG21 12-1/2 (31.8) 28 (71.1) 1 Requires CWI or RLB option in Canada for metal halide. Available for 175-450W only. 2 Requires CWI or MRB option in Canada for high pressure sodium. Available for 70-400W only, 200V and 240V, 50Hz and 60Hz ballast available for use with U.S. metal halide and high pressure sodium lamps. 3 Optional multi-tap ballast (V, 208V, 240V, V; V, V, 347V in Canada). 4 Optional SCWA five-tap ballast (V, 208V, 240V, V, 480V). Available for 250W, 400W, 1000W metal halide and high pressure sodium (CWA only). 5 Available for shipments outside of U.S. only. 6 Specify lamp type, reflector and distribution; see Configurations table. 7 175-450W metal halide only. 8 400W metal halide only. 408 1-800-315-4963 www.lithonia.com
PRODUCT INFORMATION For high mounting heights that require high efficiencies, horizontal illumination and premium contrast control. Optimum performance for high ambient temperatures and harsh environments. Ideal for heavy manufacturing areas, warehouses, retail aisles and gymnasiums. Housing: Rugged, heavy-duty, die-cast aluminum with white polyester powder finish. components horizontally opposed and heat-sinked to ballast housing. PGE16GLE and PGE21GLE: Self-cleaning, ventilated design carries optical contaminants out through top of reflector. High-efficiency, high-performance, heatresistant borosilicate glass reflector mounted within heavy-gauge rigid wire form rings and rods fitted to top and bottom of reflector. Yields high vertical footcandles with low brightness and excellent contrast control. PGE16AGLE and PGE21AGLE: High-efficiency, highperformance, heat-resistant borosilicate glass reflector with aluminum shroud to protect glass prisms from oily dirt accumulation, emphasizing downward efficiency. Ballast: All ballasts are 100% factory tested. HPS: Constant wattage autotransformer. MH: 175-450W fixtures shipped within the U.S. require super CWA pulse start ballasts which are 88% efficient and EISA-legislation compliant (must specify SCWA option). CSA, NOM or INTL options required for probe start shipments outside the U.S. 1000W is constant wattage autotransformer. Socket: Glazed porcelain, vertically oriented, mogul base socket with copper alloy, nickel-plated screw shell and center contact. Installlation: Cast-aluminum pendant splice box threaded for 3/4" conduit (standard). Other mounting options available. UL Listed to U.S. and NOM Certified. UL Listed for damp locations. Ambient operation: -30 C to 55 C (high ambient HA option for 65 C). 750W, 875W and 1000W pulse start -30 C to 40 C. DuraBay Glass TPGE PG16GLE TPGE PG21GLE TPGE PG16AGLE TPGE PG21AGLE DuraBay TPGE PG21AGLE TPGE PG16AGLE HIGH BAY TPGE PG16GLE TPGE PG21GLE ORDERING INFORMATION For shortest lead times, configure products using bolded options. Example: TPGE 400M PG16GLE M TB SCWA Series Lamp type 6 Reflector 6 Distribution 6 Voltage TPGE Metal halide 750M 400S PG16GLE N Narrow TB 3 175M 875M 1000S PG21GLE C Concentrating 250M 1000M PG16AGLE M Medium 208 1,2 320M High pressure sodium PG21AGLE S Spread 240 1,2 350M 150S W Widespread 400M 200S N21 Narrow 347 450M 250S C21 Concentrating 480 TBV 4 Ballast For shipments to U.S. territories, SCWA must be specified to comply with EISA. SCWA Super constant wattage autotransformer RLB Regulated lag ballast Non-EISA ballast (blank) Standard magnetic ballast 5,7 CWI Constant wattage isolated 5,7 MRB Magnetic regulator ballast SCWI Isolated SCWA 5,8 Options For options and accessories, see pages 433-439. CONFIGURATIONS REFLECTOR LAMP TYPE DISTRIBUTION PG16GLE, PG16AGLE 150S, 175M, 250M, 320M, 350M, 400M, 450M N, C, M, S, W PG16GLE, PG16AGLE 200S, 250S, 400S C, M, S, W PG21GLE, PG21AGLE 350M, 400M, 450M, 750M, 875M N21 PG21GLE, PG21AGLE 1000M, 400S, 1000S C21 17-1/4 (44.3) TPG PG16GLE 17-5/8 (44.7) 26-1/8 (66.4) 22-1/2 (57.2) TPG PG21GLE 20-1/2 (52.1) 28-1/2 (72.4) 1 Requires CWI or RLB option in Canada for metal halide. Available for 175-450W only. 2 Requires CWI or MRB option in Canada for high pressure sodium. Available for 70-400W only, 200V and 240V, 50Hz and 60Hz ballast available for use with U.S. metal halide and high pressure sodium lamps. 3 Optional multi-tap ballast (V, 208V, 240V, V; V, V, 347V in Canada). 4 Optional SCWA five-tap ballast (V, 208V, 240V, V, 480V). Available for 250W, 400W, 1000W metal halide and high pressure sodium (CWA only). 5 Available for shipments outside of U.S. only. 6 Specify lamp type, reflector and distribution; see Configurations table. 7 175-450W metal halide only. 8 400W metal halide only. www.lithonia.com 1-800-315-4963 409
PRODUCT INFORMATION Acrylume Acrylic HIGH BAY SH PA 22 SH PA25 Acrylume SH PA22 SH PA25 For high mounting heights that require higher efficiencies, high horizontal and vertical illumination, and premium contrast control. Ideal for light manufacturing areas, warehouses and retail aisles. Steel ballast housings should be used in areas with minimal airborne contaminants. Certain airborne contaminants can diminish integrity of acrylic. Refer to Acrylic Environmental Compatibility tables on pages 794-795 for suitable uses. Housing: Steel housing with white polyester powder coat finish. All electrical components are positioned to assure unit will hang straight. Housing is ventilated for optimal thermal performance. UV-stabilized, highefficiency, high-performance acrylic refractor yields high horizontal footcandles while maintaining low brightness. Optical assembly is fully adjustable, accommodates a range of light distributions while providing approximately 15-20% up-light. Selfcleaning, ventilated design carries optical contaminants out through top of refractor. Coated lamps provide optimum performance. Ballast: Pulse start: 100% factory tested high power factor. Meets and exceeds the minimum energy efficiency required by the Energy Independence and Security Act of 2007 (EISA). "PINK" socket with screw shell and center contact. For use with O-rated, protected metal halide : One-piece galvanized hook and spring steel latch with cord and plug (SC3P) standard. Pendant splice box with top entry for 3/4" conduit also available with other mounting options. To protect reflector from breakage; use full wire guard (FWG) option in areas where reflectors are susceptible to impact. UL Listed to U.S. and NOM Certified. UL Listed for damp locations. Ambient operation: -30 C to 40 C. ORDERING INFORMATION For shortest lead times, configure products using bolded options. Example: SH 400MP PA22 TVOLT HEB Series Lamp type Reflector Voltage Ballast Options SH Protected metal halide 400MP PA22 PA22N PA22L PA25 TVOLT 1 208 240 HEB HID electronic ballast For options and accessories, see pages 433-439. 23-3/4 to 26-3/4 (60.3 to 67.9) 24-1/3 to 27-1/2 (58.7 to 66.4) 13-1/2 (34.3) 14-1/4 (36.2) 22-3/8 (56.8) SH PA22 25-7/8 (65.7) SH PA25 1 Tri-volt electronic ballast capable of operating on any line voltage between V and V at 50Hz or 60Hz. Operates 320, 350 and 400W pulse start lamp only. 410 1-800-315-4963 www.lithonia.com
PRODUCT INFORMATION For high mounting heights that require higher efficiencies, high horizontal and vertical illumination and premium contrast control. Ideal for light manufacturing areas, warehouse and retail aisles. Steel ballast housings should be used in areas with minimal airborne contaminants. Housing: Steel housing with white polyester powder coat finish. All electrical components are positioned to assure unit will hang straight. Housing is ventilated for optimal thermal performance. : Premium spun aluminum anodized reflector combines high efficiency with extended lamp shielding and glare control. Exclusive fluted design that minimizes color shift. Self-cleaning ventilated design carries contaminants out of the top of the reflector. Optical system is adjustable and accommodates the full range of light distributions. Ballast: Pulse start, 100% factory tested high power factor. Meets and exceeds the minimum energy efficiency required by the Energy Indepenence and Security Act of 2007 (EISA). Ballast will operate pulse start lamps only from V V. 50/60Hz. Socket: Vertically oriented mogul base protected exclusionary "PINK" socket with copper alloy, nickel-plated screw shell and center contact. For use with O-rated protected metal halide : One-piece galvanized hook and spring steel latch with cord and plug (SC3P) standard. Pendant splice box with top entry for 3/4" conduit also available with other mounting options. UL Listed to U.S. and Canadian safety standards. NOM Certified. UL Listed for damp locations. Ambient operation: -30 C to 40 C SH A17 Hi-Tek Aluminum S H A17 SH A22 Hi-Tek SH A22 HIGH BAY ORDERING INFORMATION For shortest lead times, configure products using bolded options. Example: SH 400MP A17 TVOLT HEB Series Wattage Optical Voltage Ballast Options SH 1 Protected metal halide A17 TVOLT 1 For options and accessories, see pages 433-439. 400MP A22 208 240 HEB HID electronic ballast SCK WGA22 WGA17 ACCESSORIES 60" safety chain kit Wireguard for use with A22 reflector Wireguard for use with A17 reflector 23-1/4 (59.1) 23-1/4 (59.1) 12-1/8 (31.8) 12-1/4 (31.1) 17-7/8 (45.4) SH A17 23-1/4 (59.1) SH A22 1 Tri-volt electronic ballast capable of operating on any line voltage between V and V at 50Hz or 60Hz. Operates 320, 350 and 400W pulse start lamp only. www.lithonia.com 1-800-315-4963 411
HIGH BAY PRODUCT INFORMATION SH A16 SH A16GL Hi-Tek SH A16GL SH A16 Use in high mounting heights that require high efficiencies, horizontal illumination and premium contrast control. Ideal for light manufacturing areas, warehouses and retail aisles. Steel ballast housings should be used in areas with minimal airborne contaminants. Housing: Rugged octagonal steel housing provides structural strength and pleasing aesthetics. Center-mounted ballast is heat-sinked and all electrical components are positioned within the vented housing for cooler operations. White polyester powder coat finish. High-efficiency, anodized, spun aluminum reflector with exclusive fluted design that minimizes arc-tube voltage rise for optimal lamp life. Open A16 optical is self-cleaning with a ventilated design that carries contaminants out through top of reflector. Lensed A16GL optical features a gasketed clear tempered glass lens with hinge and stainless steel latches for easy tool-less access. Ballast: Pulse start, 100% factory tested high power factor. Meets and exceeds the minimum energy efficiency required by the Energy Independence and Security Act of 2007 (EISA). Ballast will operate pulse start lamps only from 200V - V at 50Hz or 60Hz. base "PINK" socket with copper alloy nickelplated screw shell and center contact. For use with "O" rated protected metal halide Housing: Integral rapid-latch steel hook provided with RELOC or cord-and-plug assembly. Optional pendant splice box (PSB) for 3/4" conduit also available with mounting options. Hi-Tek Aluminum Optical mounting: Dieformed 18-gauge galvanized adjustable steel bracket. UL Listed to U.S. and NOM Certified. Consult factory. UL Listed for damp locations. Ambient operation: -30 C to 40 C. 55 C available. Consult factory. ORDERING INFORMATION For shortest lead times, configure products using bolded options. Example: SH 400MP A16 TVOLT HEB Series Lamp type Reflector Voltage Ballast Options SH Protected metal halide A16 TVOLT 1 For options and accessories, see pages 433-439. 400MP A16GL 208 240 HEB HID electronic ballast SCK WGA16 ACCESSORIES 60" safety chain kit Wireguard for use with A16 reflector 20-5/8 to 23-5/8 (52.4 to 60.0) 21-1/4 to 24-1/4 (54.0 to 61.6) 9-5/8 (24.4) 10-1/4 (26.0) 16-3/8 (41.6) SH A16 17-3/4 (45.1) SH A16GL 1 Tri-volt electronic ballast capable of operating on any line voltage between V and V at 50Hz or 60Hz. Operates 320, 350 and 400W pulse start 412 1-800-315-4963 www.lithonia.com
PRODUCT INFORMATION For high mounting heights that require high efficiencies and horizontal illumination. Ideal for general manufacturing areas, storage areas and warehouse aisles. Steel ballast housing (SH) should be used in areas with minimal airborne contaminants. Housing: Rugged octagonal steel housing provides structural strength and pleasing aesthetics. Center-mounted ballast is heat-sinked and all electrical components are positioned within the vented housing for cooler operations. White polyester powder coat finish. All electrical components are positioned to assure unit will hang straight. A15: High-efficiency, anodized, spun aluminum reflector that minimizes arctube voltage rise for optimal lamp life. Self-cleaning ventilated design carries contaminants out through top of reflectors. A14: One-piece hydroformed, anodized aluminum reflector provides rectangular distribution for maximum luminaire spacing and high illumination. Ballast: Pulse start, 100% factory tested high power factor. Meets and exceeds the minimum energy efficiency required by the Energy Independence and Security Act of 2007 (EISA). Ballast will operate pulse start lamps only from 200V-V at 50Hz or 60Hz. "PINK" socket with screw shell and center contact. For use with O-rated, protected metal halide Housing: Integral rapid-latch steel hook provided with RELOC or cord-and-plug assembly. Optional pendant splice box (PSB) for 3/4" conduit also available with mounting options. Optical mounting: Die-formed 18-gauge galvanized adjustable steel bracket. UL Listed to U.S. and NOM Certified. UL Listed for damp locations. Ambient operation: -30 C to 40. Specify high ambient (HA option) for 55 C. SH A15 Hi-Tek Aluminum S H A15 SH A14 Hi-Tek SH A14 HIGH BAY ORDERING INFORMATION For shortest lead times, configure products using bolded options. Example: SH 400MP A15 TVOLT HEB Series Lamp type Reflector Voltage Ballast Options SH Protected metal halide A15 TVOLT 1 For options and accessories, see pages 433-439. 400MP A14 208 240 HEB HID electronic ballast 18-5/8 to 21-5/8 (47.3 to 54.9) 18-5/8 to 21-5/8 (47.3 to 54.9) 8-1/4 (20.1) 8-1/8 (20.6) 14-1/8 (35.8) SH A15 13-5/8 (34.6) SH A14 1 Tri-volt electronic ballast capable of operating on any line voltage between V and V at 50Hz or 60Hz. Operates 320, 350 and 400W pulse start www.lithonia.com 1-800-315-4963 413
HIGH BAY PRODUCT INFORMATION SPG DuraBay For high mounting heights that require high efficiencies, horizontal and vertical illumination, and premium contrast control. Ideal for retail and warehouse applications. Steel ballast housing (SPG) should be used in areas with minimal airborne contaminants. Housing: Steel housing with white polyester powder coat finish. All electrical components are positioned to assure unit will hang straight. Housing is ventilated for optimal thermal performance. High-efficiency, highperformance, heat-resistant borosilicate glass reflector is mounted with a heavy-gauge rigid wire form fitted to top of reflector. Opticals have a self-cleaning, ventilated design that carries optical contaminants out through top of reflector for maximum performance. Prismatic glass controls glare, reduces reflector-side wall brightness, and adds uplight component for greater visual comfort and improved uniformity. Ballast: Pulse start: 100% factory tested high power factor. Meets or exceeds the minimum energy efficiency required by the Energy Independence and Security Act of 2007 (EISA). "PINK" socket with screw shell and center contact. For use with O-rated, protected metal halide DuraBay Glass One-piece galvanized hook and spring steel latch with cord and plug (SC3P) is standard. Pendant splice box (PSB) with top entry for 3/4" conduit also available with other mounting options. UL Listed to U.S. and NOM Certified. UL Listed for damp locations. Ambient operation: -30 C to 40 C. Specify high ambient (HA) option for 55 C. ORDERING INFORMATION For shortest lead times, configure products using bolded options. Example: SPG 400MP PG15 M TVOLT HEB Series Lamp type Reflector Distribution Voltage Ballast Options SPG Metal halide protected PG16 N Narrow TVOLT 1 For options and accessories, see pages 433-439. PG16A C Concentrating HEB HID electronic ballast M Medium 208 400MP S Spread 240 W Widespread 25-1/2 (64.8) 10-1/2 (26.7) 17-1/4 (43.8) 1 Tri-volt electronic ballast capable of operating on any line voltage between V and V at 50Hz or 60Hz. Operates 320, 350 and 400W pulse start 414 1-800-315-4963 www.lithonia.com
PRODUCT INFORMATION For controlled environments that require a balance between high vertical and horizontal illumination. Ideal for retail areas, light manufacturing areas and aisles. Certain airborne contaminants can diminish integrity of acrylic. Refer to Acrylic Environmental Compatibility tables on pages 794-795 for suitable uses. Housing: Rugged, heavyduty, die-cast aluminum with white polyester powder finish. components horizontally opposed and heat-sinked to ballast housing for cooler operation. Injection-molded, virgin acrylic reflector and drop (PA25D) or conical (PA22C) lens. UV stabilized. Hinge and lens retainer latches facilitate tool-less removal for maintenance and cleaning. Totally enclosed, gasketed refractor and reflector inhibit the entrance of ambient contaminants. Meets UL lamp rupture containment specifications. Coated lamps provide optimum performance. Ballast: All ballasts are 100% factory tested. HPS: Constant wattage autotransformer. MH: 175-450W fixtures shipped within the U.S. require super CWA pulse start ballasts which are 88% efficient and EISA-legislation compliant (must specify SCWA option). CSA, NOM or INTL options required for probe start shipments outside the U.S. "PINK" socket with screw shell and center contact. For use with O-rated, protected metal halide Pendant splice box 16-gauge galvanized steel with polyester powder finish. Removable box slides on integral die-cast aluminum housing mounting flange and mounts to 3/4" pendant conduit prior to ballast housing installation. Matching wire access cover accepts RELOC modular wiring. Complete assembly meets or exceeds UL 50-pound pull test. Optic mounting: Four 8-32 zinc-plated, tri lobular, threaded-rolling screws are arranged concentrically around the lamp socket. 16-gauge, die-formed steel plate with matching keyhole slot pattern for vibrationresistant mounting. For areas where reflectors are subject to impact (gymnasiums, etc.) add FWG (full wireguard) to catalog number. UL Listed to U.S. and NOM Certified. UL Listed for damp locations. -30 C to 40 C ambient operations. UL wet location available. TX PA22C Acrylume Acrylic T X PA 2 2C TX PA25D Acrylume TX PA25D LOW BAY ORDERING INFORMATION For shortest lead times, configure products using bolded options. Example: TX 400MP PA22C TB SCWA Series Lamp type Reflector Voltage Ballast Options TX Protected metal halide High pressure sodium PA22C TB 4 Non-EISA ballasts For options and accessories, 175MP 200MP 250S 400S PA25D 208 1,2 For shipments to U.S. territories, SCWA must be specified to comply with EISA. (blank) Standard magnetic ballast 5,6 see pages 433-439. 250MP 240 1,2,3 SCWA Super constant wattage autotransformer CWI Constant wattage RLB Regulated lag ballast isolated 5,6 MRB Magnetic regulator 347 ballast 400MP 450MP 480 1,2 SCWI Isolated SCWA 5,7 15-3/4 (40.0) 22-3/4 (57.8) 24-1/8 (61.3) 17-1/8 (43.5) 22-3/4 (57.8) TX PA22C 25-7/8 (65.7) TX PA25D 1 Requires CWI option in Canada for metal halide, available for 175-450W only. Not available for 250W in 480V. 2 Requires CWI or MRB option in Canada for high pressure sodium. Available for 70-400W only. 3 220V and 240V, 50Hz and 60Hz ballast available for use with U.S. protected metal halide and high pressure sodium lamps. 4 Optional multi-tap ballast (V, 208V, 240V, V; V, V, 347V in Canada). 5 For shipments outside of U.S. only. 6 175-450W metal halide only. 7 400W metal halide only. www.lithonia.com 1-800-315-4963 415
LOW BAY PRODUCT INFORMATION T X PA 22GLE TX PA25ALE Acrylume TX PA22GLE TX PA25ALE For controlled environments that require vertical and high horizontal illumination. Ideal for retail areas, light manufacturing areas and aisles. Certain airborne contaminants can diminish integrity of acrylic. Refer to Acrylic Environmental Compatibility tables on pages 794-795 for suitable uses. Rugged, heavy-duty, die-cast aluminum with white polyester powder finish. components are horizontally opposed and heat-sinked to ballast housing for cool operation. Integral splice box mounting flange ensures structural integrity. : Injection-molded, virgin acrylic reflector with clear, tempered glass lens enclosure. UV-stabilized reflector. Lens is tempered glass for 22" reflector and flat clear acrylic for 25" reflector. Hinge and lens retainer latches facilitate tool-less removal for maintenance and cleaning. Totally enclosed, gasketed lens and reflector inhibit the entrance of ambient contaminants. Meets UL lamp rupture containment specifications. Coated lamps provide optimum performance. Ballast: All ballasts are 100% factory tested. HPS: Constant wattage autotransformer. MH: 175-400W fixtures shipped within the U.S. require super CWA pulse start ballasts which are 88% efficient and EISA-legislation compliant (must specify SCWA option). CSA, NOM or INTL options required for probe start shipments outside the U.S. "PINK" socket with screw shell and center contact. For use with O-rated, protected metal halide Pendant splice box removable cast-aluminum box slides on integral die-cast aluminum housing mounting flange and mounts to 3/4" pendant conduit prior to ballast housing installation. Matching wire access cover accepts RELOC modular wiring. Complete Acrylume Acrylic assembly meets or exceeds UL 50-pound pull test. Optical mounting: Four 8-32 corrosion-resistant, trilobular, thread-rolling screws are arranged concentrically around the lamp socket. 16-gauge galvanized steel support ring with matching keyhole slots is pre-installed for vibration-resistant mounting. For areas where reflectors are subject to impact (gymnasiums, etc.) add FWG (full wireguard) to catalog number. UL Listed to U.S. and NOM Certified. UL Listed for damp locations. -30 C to 40 C ambient operations (high ambient HA option for 55 C). ORDERING INFORMATION For shortest lead times, configure products using bolded options. Example: TX 400MP PA22GLE TB SCWA Series Lamp type Reflector Voltage Ballast Options TX Protected metal halide 175MP 1 200MP High pressure sodium 250S 400S PA22GLE PA25ALE TB 5 208 2,3 For shipments to U.S. territories, SCWA must be specified to comply with EISA. 250MP 240 2,3,4 SCWA Super constant wattage autotransformer 400MP 347 480 2,3 RLB Regulated lag ballast Non-EISA ballast (blank) Standard magnetic ballast 6,7 CWI Constant wattage isolated 6,7 MRB Magnetic regulator ballast SCWI Isolated SCWA 6,8 For options and accessories, see pages 433-439. 17-1/2 (44.5) 24-1/2 (62.2) 18 (45.7) 25 (63.5) 23-3/8 (59.4) TX PA22GLE 25-7/8 (65.7) TX PA25ALE 1 Only available with PA22GLE. 2 Requires CWI or RLB option in Canada for metal halide. Available for 175-450W only. 3 Requires CWI or MRB option in Canada for high pressure sodium. Available for 70-400W only. 4 220V and 240V 50Hz and 60Hz ballasts available for use with U.S., protected metal halide and high pressure sodium lamps. 5 Optional multi-tap ballast (V, 208V, 240V, V; V, V, 347V in Canada). 6 Available for shipments outside of U.S. only. 7 175-400W metal halide only. 8 400W metal halide only. 416 1-800-315-4963 www.lithonia.com
PRODUCT INFORMATION For areas that require vertical illumination and glare control at low mounting heights. Ideal for general open areas, retail spaces and aisles. Certain airborne contaminants can diminish integrity of acrylic. Refer to Acrylic Environmental Compatibility tables on pages 794-795 for suitable uses. Rugged, heavy-duty, die-cast aluminum with white polyester powder finish. components horizontally opposed and heat-sinked to ballast housing for cooler operation. Integral splice box mounting flange ensures structural integrity. Injection-molded, virgin acrylic lens and highly reflective, white polyester powder painted reflector. UV stabilized. Hinge and lens retainer latches facilitate tool-less removal for maintenance and cleaning. Continuously gasketed refractor and reflector inhibits entrance of outside contaminants. Ballast: All ballasts are 100% factory tested. HPS: Constant wattage autotransformer. MH: 150-400W fixtures shipped within the U.S. require super CWA pulse start ballasts which are 88% efficient and EISAlegislation compliant (must specify SCWA option). CSA, NOM or INTL options required for probe start shipments outside the U.S. "PINK" socket with screw shell and center contact. For use with O-rated, protected metal halide Pendant splice box: Removable cast-aluminum box slides on integral die-cast aluminum housing mounting flange and mounts to 3/4" pendant conduit prior to ballast housing installation. Matching wire access cover accepts RELOC modular wiring. Complete assembly meets or exceeds UL 50- pound pull test. Optic Mounting Four 8-32 zinc-plated, tri-lobular, thread-rolling screws are arranged concentrically around the lamp socket. 16 gauge, galvanized steel support ring with matching keyhole pattern for vibration-resistant mounting. UL listed -30 C to 40 C ambient operations and damp locations. 55 C high ambient (HA option) available. (HA not available on TXD A23). UL wet location available. Consult factory. UL listed to U.S. and Canadian safety standards. NOM Certified. Hi-Tek Aluminum T X A 2 3 TXD A23 Hi-Tek LOW BAY ORDERING INFORMATION For shortest lead times, configure products using bolded options. Example: TX 400MP A23 TB SCWA Series Lamp type Reflector Voltage TX TXD 1 Protected metal halide 175MP 200MP 250MP 1 400MP 1 450MP High pressure sodium 250S 400S A23 TB 5 208 2,3 2, 3, 4 240 347 480 2,3 Ballast For shipments to U.S. territories, SCWA must be specified to comply with EISA. SCWA Super constant wattage autotransformer (Standard) RLB Regulated lag ballast Non-EISA ballast (blank) Standard magnetic ballast 6,7 CWI Constant wattage isolated 6,7 MRB Magnetic regulator ballast SCWI Isolated SCWA 6,8 Options For options and accessories, see pages 433-439. THD 1 23 (58.4) 15-1/4 (38.7) 22-1/4 (56.5) 1 TXD consists of TX housing and A23 optical assembly shipped in one carton. Available with tapped ballast only. Available only in 250MP and 400MP SCWA ballast only. 2 Requires CWI or RLB option in Canada for metal halide. Available for 175-450W only. 3 Requires CSI or MRB option in Canada for high pressure sodium. Available for 70-400W only. 4 220V and 240V, 50Hz and 60Hz ballasts available for use with U.S. protected metal halide lamps. 5 Optional multi-tap ballast (V, 208V, 240V, V; V, V, 347V in Canada.) 6 Available for shipments outside of U.S. only. 7 175-450W metal halide only. 8 400W metal halide only. www.lithonia.com 1-800-315-4963 417
LOW BAY PRODUCT INFORMATION TX A20 TX A26 TX A30 Hi-Tek For areas that require good vertical illumination with excellent glare control at low mounting heights. Ideal for general open areas, retail spaces, aisles and manufacturing areas. Certain airborne contaminants can diminish integrity of acrylic. Refer to Acrylic Environmental Compatibillity tables on pages 794-795 for suitable uses. Housing: Rugged, heavyduty, die-cast aluminum with white polyester powder finish. components horizontally opposed and heat-sinked to ballast housing for cooler operation. : Injection-molded virgin acrylic lens, fully fluted anodized aluminum reflector. Hinge and lens retainer latches facilitate tool-less removal for maintenance and cleaning. Totally enclosed, gasketed refractor and reflector inhibit the entrance of ambient contaminants. All distribution patterns are widespread. Ballast: All ballasts are 100% factory tested. HPS: constant wattage autotransformer, MH Super CWA Pulse Start ballast, 88% efficient and EISA legislation compliant, are required for 150-400W(must order SCWA option) for US shipments only. CSA, NOM or INTL required for probe start shipments outside the US. base "PINK" socket with copper alloy nickel plated screw shell and center contact. For use with 'O' rated protected metal halide Pendant splice box: Removable cast-aluminum box slides on integral die-cast aluminum housing mounting flange and mounts to 3/4" pendant conduit prior to ballast housing installation. Matching wire access cover accepts RELOC modular wiring. Complete assembly meets or exceeds UL 50- pound pull test. Hi-Tek Aluminum Optic mounting: Four 8-32 zinc-plated, tri-lobular, threadrolling screws are arranged concentrically around the lamp socket. 16-gauge, galvanized steel support ring with matching keyhole pattern for vibration-resistant mounting. UL Listed to U.S. and NOM Certified. UL Listed -30 C to 40 C ambient operation and damp locations (high ambient HA option for 55 C). UL wet location available. ORDERING INFORMATION For shortest lead times, configure products using bolded options. Example: TX 400MP A26 TB SCWA Series Lamp type 6 Reflector Voltage Ballast Options TX Protected metal halide 100MP High pressure sodium 50S A20 A26 TB 4 For shipments to U.S. territories, SCWA must be specified to comply with EISA. For options and accessories, see pages 433-439. 150MP 70S A30 208 1,2 SCWA Super constant wattage autotransformer 175MP 100S 240 1,2,3 RLB Regulated lag ballast 200MP 150S Non-EISA ballast 250MP 200S 347 (blank) Standard magnetic ballast 5,7 480 1,2 CWI Constant wattage isolated 5,7 MRB Magnetic regulator ballast 400MP SCWI Isolated SCWA 5,8 REFLECTOR A20 A26 A30 CONFIGURATIONS LAMP TYPE 100MP, 150MP, 175MP, 200MP, 250MP, 50S, 70S, 100S, 150S, 200S 250MP,,, 400MP 175MP, 200MP, 250MP,,, 400MP 21-1/2 (54.6) 24-1/8 (61.3) 22-1/4 (56.5) 14-1/2 (36.8) 17-1/8 (43.5) 15-1/4 (38.7) 20-3/4 (52.7) TX A20 27-1/2 (69.9) TX A26 30-3/4 (78.1) TX A30 1 Requires CWI or RLB option in Canada for metal halide. Available for 175-450W only. 2 Requires CSI or MRB option in Canada for high pressure sodium. Available for 70-400W only. 3 220V and 240V 50Hz and 60Hz ballasts available for use with U.S., protected metal halide and high pressure sodium lamps. 4 Optional multi-tap ballast (V, 208V, 240V, V; V, V, 347V in Canada). 5 Available for shipments outside of U.S. only. 6 Specify lamp type and reflector, see Configurations table. 7 150-400W metal halide only. 8 400W metal halide only. 418 1-800-315-4963 www.lithonia.com
PRODUCT INFORMATION For areas that require high vertical illumination and wide spacings. Ideal for aisles, service areas and parking garages. Certain airborne contaminants can diminish integrity of acrylic. Refer to Acrylic Environmental Compatibility tables on pages 794-795 for suitable uses. Housing: Heavy-duty, diecast aluminum halves. Ballast and electrical components are heat-sinked and horizontally opposed for cooler operation. Integral splice box mounting flange ensures structural integrity. Electrostatically applied white polyester powder paint. (A121, A125): Anodized aluminum 12" reflector with one-piece injection-molded acrylic or polycarbonate refractor and bottom enclosure. (A162, A165): 16" high efficiency, opticalquality, white polyester powder finish with one-piece injection-molded acrylic or polycarbonate refractor and bottom enclosure. Consult factory. Type I and II: Asymmetrical long and narrow distribution. Type V: Symmetrical circular distribution. OB optics are open bottom. Ballast: All ballasts are 100% factory tested. HPS: Constant wattage autotransformer. MH: 200-400W fixtures shipped within the U.S. require super CWA pulse start ballasts which are 88% efficient and EISA-legislation compliant (must specify SCWA option). CSA, NOM or INTL options required for probe start shipments outside the U.S. "PINK" socket with screw shell and center contact. For use with O-rated, protected metal halide Pendant splice box threaded for 3/4" conduit (standard). Other mounting options available. Matching wire access cover accepts RELOC modular wiring. Complete assembly meets or exceeds UL 50-pound pull test. Optical mounting: Two 3-32 zinc-plated, tri-lobular, threaded-rolling screws are arranged concentrically around the lamp socket. Keyhole slot pattern for vibrationresistant mounting. UL Listed to U.S. and NOM Certified. UL Listed for damp locations and -30 C to 40 C ambient operation (high ambient HA option for 55 C). UL wet location standard on 150MP closed bottom only. WL option available on all others, closed bottom only. Hi-Tek Acrylic TX A121 T X A125 TX A162 TX A165 Hi-Tek LOW BAY ORDERING INFORMATION For shortest lead times, configure products using bolded options. Example: TX 250MP A125 TB SCWA Series Lamp type 7 Reflector Voltage Ballast 6 Options TX Protected metal halide 150MP 200MP High pressure sodium 200S 1 250S 1 A165 A162 A165OB TB 5 208 2,3 For shipments to U.S. territories, SCWA must be spcified to comply with EISA. For options and accessories, see pages 433-439. 250MP 400S 1 A162OB 240 2,3,4 SCWA Super constant wattage autotransformer 1 A125 RLB Regulated lag ballast 1 A121 347 Non-EISA ballast 7 400MP 1 A125OB 480 2,3 (blank) Standard magnetic ballast 8 A121OB SCWI Isolated SCWA 9 CWI Constant wattage isolated 8 CONFIGURATIONS REFLECTOR LAMP TYPE A162, A165 150MP, 200MP, 200S, 250MP, 250S A1650B, A1650B,, 400MP, 400S A125, A121, A125OB, A1210B 200S, 250S, 400S 17 (43.2) 20-5/8 (52.4) 10 (25.4) 13-5/8 (34.6) 12-1/4 (31.1) TX A121/A125 16-3/4 (42.6) TX A162/A165 1 Open bottom only. 2 Requires CWI or RLB option in Canada for metal halide. Available in 175-400W. 3 Requires CWI or MRB option in Canada for high pressure sodium. Available 70-400W. 4 220V and 240V 50Hz and 60Hz ballasts available for use with U.S. protected metal halide and sodium lamps. 5 Optional multi-tap ballast (V, 208V, 240V, V; V, V, 347V in Canada.) 6 Available for shipments outside of U.S. only. 7 Specify lamp type and reflector, see Configurations table. 8 150-400W metal halide only. 9 400W metal halide only. www.lithonia.com 1-800-315-4963 419
LOW BAY PRODUCT INFORMATION HID LOW BAY Enclosed HID lowbay fixture with white painted aluminum reflector and prismatic acrylic lens. Designed to produce ballanced vertical and horizontal illumination for mounting heights of 20' or lower. Ideal for use in retail spaces, light manufacturing areas, storage areas and loading docks. Certain airborne contaminants can diminish integrity of acrylic. Refer to Acrylic Environmental Compatibility tables on pages 794-795 for suitable uses. Durable die-cast aluminum housing in a compact design with smooth contours and electro-statically applied white polyester powder paint. Ballast and electrical components are fully contained and heat-sinked within the housing. Steel hook with spring steel latch on removable pendant splice box is standard. Convenient side knockout entries in splice box allow for easy wiring. Hook is easily removed for conduit pendant mounting. Spun-aluminum 20-inch reflector with electro-statically applied white polyester powder piant and clear acrylic lens are optically designed for superior uniformity and brightness control. Ballast: All ballasts are 100% factory tested. 400W fixtures shipped within the U.S. require super CWA pulse start ballasts which are 88% efficient and EISA-legislation compliant (must specify PPSL option). CSA required forshipments to Canada. Contractor Select Stock "PINK" socket with screw shell and center contact. For use with O-rated, protected metal halide UL listed to U.S. and Canadian standard for 30 C to 40 C ambient operations and damp locations. ORDERING INFORMATION CATALOG NUMBER CXD400PPSL CXD400PL CSA COMPONENT PARTS CHCX 400PPS HSG CXA20 DESCRIPTION Ballast housing containing 400W MH pulse start ballast, protected exclusionary PINK socket, mounting legs, 400W MH protected pulse start lamp, 20 reflector and hook with pendant splice box Ballast housing containing 400W MH probe start ballast, protected exclusionary PINK socket, mounting legs, 400W MH protected probe start lamp, 20 reflector and hook with pendant splice box DESCRIPTION Housing with 400W protected socket, pendant splice box and hook. Works with either CHD or CXD steel optical. 20" white painted reflector with diffuser (lens) DIMENSIONS (L X W X D, INCHES) FIXTURE WEIGHT (LBS.) PALLET QUANTITY 20-7/8" x 20-7/8" x 11-7/8" 21.32 12 20-7/8" x 20-7/8" x 11-7/8" 21.32 12 11-7/8 (30.2) 20-7/8 (53.0) 420 1-800-315-4963 www.lithonia.com
PRODUCT INFORMATION For areas that require high efficiencies, general horizontal/high vertical illumination and premium contract control at lowmounting heights. Ideal for light manufacturing areas, warehouse and retail aisles. Steel ballast housings should be used in areas with minimal airborne contaminants. Certain airborne contaminants can diminish integrity of acrylic. Refer to Acrylic Environmental Compatibility tables on pages 794-795 for suitable uses. Housing: Rugged octagonal steel housing provides structural strength and pleasing aesthetics. Center- mounted ballast is heat-sinked and all electrical components are positioned within the vented housing for cooler operations. White polyester powder coat finish. All electrical components are positioned to assure unit will hang straight. UV stabilized. Enclosed design with integral flange includes corrosion-resistant hinge and latches allowing easy maintenance. PA22C: Injection-molded virgin acrylic reflector and conical lens. Coated lamps (must be ordered separately) provide optimal performance. Consult factory for compatibility with corrosive materials. Meets UL lamp rupture containment specifications. Provides approximately 35% uplight. PA25D: Injection-molded virgin acrylic reflector and drop lens. Provides approximately 25% uplight. PA22GLE: Injection-molded virgin acrylic reflector and Tempered glass lens. Provides approximately 10% uplight. PA25ALE: Injection-molded virgin acrylic reflector and flat lens. Provides approximately 10% uplight. Ballast: Pulse start, 100% factory-tested high power factor. Meets and exceeds the minimum energy efficiency required by the Energy Independence and Security Act of 2007 (EISA). Ballast will operate pulse start lamps only from V- V, 50/60Hz. "PINK" socket with screw shell and center contact. For use with O-rated, protected metal halide Housing: Integral rapid-latch steel hook provided with RELOC or cord-and-plug assembly. Optional pendant splice box (PSB) for 3/4" conduit also available with mounting options. Optical mounting: Die-formed 18-gauge galvanized adjustable steel bracket. UL Listed to U.S. and NOM Certified (See Options). UL Listed for damp locations. Ambient operation: -30 C to 40 C. 55 C available on PA25ALE only. Acrylume Acrylic S X PA 2 2C S X PA 25D S X PA 2 2G LE SX PA25ALE Acrylume SX PA22C SX PA25D LOW BAY SX PA22GLE SX PA25ALE ORDERING INFORMATION For shortest lead times, configure products using bolded options. Example: SX PA22C TVOLT HEB Series Lamp type Reflector Voltage Ballast Options SX Protected metal halide PA22C TVOLT 1 For options and accessories, see pages 433-439. 400MP PA25D PA22GLE PA25ALE 208 240 HEB HID electronic ballast 24-3/8 (61.9) 25-3/4 (65.4) 22-3/8 (56.8) 22-7/8 (56.1) 15-3/4 (40.0) 17-1/8 (43.5) 13-3/4 (34.9) 14-1/4 (38.0) 22-3/4 (57.8) SX PA22C 25-7/8 (65.4) SX PA25D 23-3/8 (59.4) SX PA22GLE 25-7/8 (65.7) SX PA25ALE 1 Tri-volt electronic ballast capable of operating on any line voltage between V and V at 50Hz or 60Hz. Operates 320W, 350W and 400W protected pulse start lamp only. www.lithonia.com 1-800-315-4963 421
LOW BAY PRODUCT INFORMATION SX A23 Hi-Tek For areas that require vertical illumination and glare control at low mounting heights. Ideal for general open areas, retail spaces and aisles. Steel ballast housing should be used in areas with minimal airborne contaminants. Certain airborne contaminants can diminish integrity of acrylic. Refer to Acrylic Environmental Compatability tables on pages 794-795 for suitable uses. Huosing: Rugged octagonal steel housing provides structural strength and pleasing aesthetics. Center-mounted ballast is heat-sinked and all electrical components are positioned within the vented housing for cooler operation. White polyester powder coat finish. All electrical components are positioned to assure unit will hang straight. Injection-molded UV stabilized virgin acrylic lens and highly reflective, white polyester powder painted aluminum reflector. Hingeand-lens retainer latches facilitate tool-less removal for maintenance and cleaning. Inhibits entrance of outside contaminants. Ballast: Pulse start, 100% factory-tested high power factor. Meets and exceeds the minimum energy efficiency required by the Energy Independence and Security Act of 2007 (EISA). Ballast will operate pulse start lamps only from V-V, 50/60Hz. "PINK" socket with screw shell and center contact. For use with O-rated, protected metal halide Hi-Tek Aluminum One-piece galvanized hook-and-spring steel latch with cord and plug (SC3P) is standard. Pendant splice box (PSB) with top entry for 3/4" conduit also available with mounting options. UL Listed to U.S. and NOM Certified. UL Listed for damp locations. Ambient operations: -30 C to 40 C. ORDERING INFORMATION For shortest lead times, configure products using bolded options. Example: SX 400MP A23 TVOLT HEB Series Lamp type Reflector Voltage Ballast Options SX Protected metal halide A23 TVOLT 1 For options and accessories, see pages 433-439. 400MP 208 240 HEB Electronic HID ballast 23-7/8 (60.6) 15-1/4 (38.7) 23 (58.4) 1 Tri-volt electronic ballast capable of operating on any line voltage between V and V at 50Hz or 60Hz opertates 320W, 350W and 400W pulse start 422 1-800-315-4963 www.lithonia.com
PRODUCT INFORMATION For areas that require vertical illumination and glare control at low mounting heights. Ideal for general open areas, retail spaces and aisles. Steel ballast housing should be used in areas with minimal airborne contaminants. Certain airborne contaminants can diminish integrity of acrylic. Refer to Acrylic Environmental Compatability tables on pages 794-795 for suitable uses. Housing: Rugged octagonal steel housing provides structural strength and pleasing aesthetics. Center- mounted ballast is heat-sinked and all electrical components are positioned within the vented housing for cooler operation. White polyester powder coat finish. All electrical components are positioned to assure unit will hang straight. A20 and A26: Injectionadded UV stabilized, virgin acrylic lens fully fluted anodized aluminum reflector. Positive-latch refractor clips allow access for maintenance and cleaning. Continuously gasketed refractor and reflector inhibit the entrance of ambient contaminants. Meets UL lamp rupture containment specifications. A30: Injection-molded virgin acrylic lens, fully fluted, anodized aluminum reflector; exclusive spun-fluted anodized reflector. Hinge and lens retainer latches facilitate tool-less removal for maintenance and cleaning. Totally enclosed, gasketed refractor and reflector inhibit the entrance of ambient contaminants. All distribution patterns are widespread. Ballast: Pulse start, 100% factory-tested high power factor. Meets and exceeds the minimum energy efficiency required by the Energy Independence and Security Act of 2007 (EISA). Ballast will operate pulse start lamps only from V-V, 50/60Hz. "PINK" socket with screw shell and center contact. For use with O-rated, protected metal halide One-piece galvanized hook and spring steel latch with cord and plug (SC3P) is standard. Pendant splice box (PSB) with top entry for 3/4" conduit also available with mounting options. UL Listed to U.S. and NOM Certified. UL Listed for damp locations. Ambient operations: -30 C to 40 C. SX A26 Hi-Tek Aluminum S X A 26 SX A30 Hi-Tek SX A30 LOW BAY ORDERING INFORMATION For shortest lead times, configure products using bolded options. Example: SX 400M A26 TVOLT HEB Series Lamp type Reflector Voltage Ballast Options SX A26 TVOLT 1 For options and accessories, see pages 400MP A30 208 240 HEB Electronic HID electronic ballast 433-439. 17-1/8 (43.5) 25-3/4 (65.4) 15-1/4 (38.7) 23-7/8 (60.6) 27-1/2 (69.9) SX A26 30-3/4 (78.1) SX A30 1 Tri-volt electronic ballast capable of operating on any line voltage between V and V at 50Hz or 60Hz. operates 320W, 350W and 400W pulse start www.lithonia.com 1-800-315-4963 423
LOW BAY PRODUCT INFORMATION TXF PA25ALEF T XF A30F Acrylume and Hi-Tek TXF PA25ALEF TXF A30F For general area illumination of food processing and hose-down areas requiring high efficiencies, horizontal illumination, premium glare control, ease of cleanability, compliance to FDA/USDA requirements and/or NSF splash-zone certification. For more NSF information, see page 793. Certain airborne contaminants can diminish integrity of acrylic. Refer to Acrylic Environmental Compatibility tables on pages 794-795 for suitable uses. Housing: Fully gasketed, heavy-duty, die-cast copper free (<0.4%) aluminum ballast housing. Finish meets FDA CFR 21 175.300 for resinous and polymeric coatings. Electrostatically applied white polyester powder paint. Electical components heat-sinked and horizontally opposed. External hardware is stainless steel or corrosion-resistant with no exposed threads. : PA25ALEF: Enclosed and gasketed, injectionmolded, UV stabilized, virgin acrylic reflector and flat lens. A30F: anodized aluminum and UV-stabilized virgin acrylic lens. Gasketed reflector and lens inhibit entrance of contaminants. Six stainless steel positivelatch reflector clips and stainless steel lens ring allow access for maintenance and cleaning. Gasketed refractor and reflector inhibit the entrance of ambient contaminants. Meets UL lamp rupture containment specifications. Ballast: All ballasts are 100% factory tested. HPS: Constant wattage autotransformer. MH: 175-400W fixtures shipped within the U.S. require super CWA pulse start ballasts which are 88% efficient and EISA-legislation compliant (must specify SCWA option). CSA, NOM or INTL options required for probe start shipments outside the U.S. "PINK" socket with screw shell and center contact. For use with O-rated, protected metal halide Ballast housing: Ships standard with cast splice box to ensure structural integrity. Splice box mounts to 3/4" pendant conduit. Fully gasketed access cover allows ease of wiring and inspection. Wet location hook-cord and-plug is available as a factory installed option. Food Processing Optical mounting: Four 8-32 corrosion-resistant, trilobular, thread-rolling screws are arranged concentrically around the lamp socket. Optic is sealed at the point of attachments with a onepiece gasket of FDA-approved material. A 16-gauge galvanized steel support ring with matching keyhole slots is pre-installed for vibrationresistant mounting. UL Listed to U.S. and NOM Certified. UL Listed for -30 C to 55 C ambient operation and wet locations. NSF international certified splash-zone and meets FDA/ USDA guidlines. A30F is IP65 rated against ingress of water and contaminants and is suitable for highpressure hose-downs up to 0 psi. ORDERING INFORMATION For shortest lead times, configure products using bolded options. Example: TXF 400MP A30F TB SCWA Series Lamp type Reflector Voltage Ballast Options TXF Protected metal halide 175MP High pressure sodium 250S PA25ALEF A30F TB 4 For shipments to U.S. territories, SCWA must be specified to comply with EISA. For options and accessories, see pages 433-439. 200MP 400S 208 1,2 SCWA Super constant wattage autotransformer 250MP 240 1,2,3 RLB Regulated lag ballast Non-EISA ballast 347 (blank) Standard magnetic ballast 5,6 400MP 480 1,2 CWI Constant wattage isolated 5,6 MRB Magnetic regulator ballast SCWI Isolated SCWA 5,7 25-7/8 (65.7) 23-1/8 (58.7) 18 (45.7) 15-1/4 (38.7) 25-7/8 (65.7) TXF PA25ALEF 30-3/4 (78.1) TXF A30F 1 Requires CWI or RLB option in Canada for metal halide. Available for 175-450W only. 2 Requires CSI or MRB option in Canada for high pressure sodium. Available for 70-400W only. 3 220V and 240V 50Hz and 60Hz ballasts available for use with U.S protected metal halide and high pressure sodium lamps. 4 Optional multi-tap ballast (V, 208V, 240V, V; V, V, 347V in Canada). 5 Available for shipments outside of U.S. only. 6 175-400W metal halide only. 7 400W metal halide only. 424 1-800-315-4963 www.lithonia.com
PRODUCT INFORMATION For areas that require optimum vertical illumination with glare control at low mounting heights. Ideal for parking garages, greenhouses, garden centers and low-profile industrial aisles. Certain airborne contaminants can diminish integrity of acrylic. Refer to Acrylic Environmental Compatibility tables on pages 794-795 for suitable uses. Housing: Rugged, heavy, diecast aluminum housing. Standard finish is natural aluminum polyester powder finish. Induction lighting: High frequency generator/ballast supplies high-frequency current to the lamp to initiate and maintain a gas discharge for a rated 100,000 hours of life. One-piece, injectionmolded, 100% virgin acrylic refractor. TGL Type V (A165), Type II (A162), TGR Type V (A125) and Type 1 (A121) distributions are available. Polycarbonate refractor available. Consult factory. Ballast: All ballasts are 100% factory tested. HPS: Constant wattage autotransformer. MH: 175-200W fixtures shipped within the U.S. require super CWA pulse start ballasts which are 88% efficient and EISA-legislation compliant (must specify SCWA option). CSA, NOM or INTL options required for probe start shipments outside the U.S. "PINK" socket with screw shell and center contact. For use with O-rated, protected metal halide Standard quick-mount attachment plate mounts to 4" square or octagonal J-box. Factory installed pendant mount option (PM) available. TGL: UL Listed to U.S. and NOM Certified. TGR: UL Listed and CSA Certified. NOM Certified. UL Listed for damp locations. Ambient operation: -30 C to 40 C (100M); -30 C to 25 C (250M); -40 C to 25 C (85IL). UL wet location standard for 150W metal halide TGL / TGR. Optional for all other wattages. TGL TGR Acrylume Acrylic T G L TGR Acrylume LOW BAY ORDERING INFORMATION For shortest lead times, configure products using bolded options. Example: TGL 200MP A165 TB SCWA Series Lamp Type 6 Reflector Voltage Ballast Options TGL TGR Protected metal halide 100MP 150MP 200MP High pressure sodium 70S 100S 150S Induction 55IL 85IL A165 A162 A125 A121 TB 4 208 1,2,3 240 1,2 347 480 TVOLT 7 For shipments to U.S. territories, SCWA must be specified to comply with EISA. SCWA Super constant wattage autotransformer RLB Regulated Lag ballast Non-EISA ballast (blank) Standard magnetic ballast 5 CWA Constant wattage 5 CWI Constant wattage isolated 5 MRB Magnetic regular ballast For options and accessories, see pages 433-439. CONFIGURATIONS SERIES REFLECTOR TYPE V TYPE II LAMP TYPE TGL A165 A162 100MP, 150MP, 200MP, 70S, 100S, 150S, 55IL, 85IL TGR A125 A121 100MP, 70S, 100S, 150S TGL A165 A162 55IL, 85IL 16-1/2 (41.9) TGL 15-1/2 13-3/8 (39.4) (34.0) Pendant Surface mount mount 12-1/2 (31.8) TGR 13-3/8 11-1/4 (34.0) (28.6) Pendant Surface mount mount 1 Requires CWI or RLB option in Canada for metal halide. Available for 175-250W only. 2 Requires CWI or MRB option in Canada for high pressure sodium. Available for 70-150W only. 3 220V and 240V, 50Hz and 60Hz ballasts available for use with U.S. protected metal halide lamps. 4 Optional multi-tap ballast (V, 208V, 240V, V; V, V, 347V in Canada). 5 Available for shipments outside of U.S. only. 150, 200W metal halide only. 6 Specify lamp type and reflector, see Configurations table. 7 55IL and 85IL only. www.lithonia.com 1-800-315-4963 425
GENERAL AREA LIGHTING PRODUCT INFORMATION GPV GS Parabolic Louvers Use in recessed hard-ceiling and T-bar applications that require optimum horizontal illumination with superior brightness control and lamp shielding. Ideal for open office, retail and commercial areas. Certain airborne contaminants can diminish integrity of acrylic. Refer to Acrylic Environmental Compatibility tables on pages 794-795 for suitable uses. GS fixtures for use only in T-bar ceilings. GPV housing: 20-gauge steel housing with high reflectance, white polyester paint. GS housing: Square steel pan finished in polyester matte white powder paint. GPV: Specular clear parabolic 16-cell or 9-cell, 4" deep aluminum louvers float in the middle of a black reveal with tempered glass overlay. Louver door attached with T-hinges and spring loaded latches for positive retention. Coated lamps provide optimum performance. GS: One-piece, semi- specular, spun aluminum reflector. Exclusive design with extended sheilding provides wide distribution with minimal brightness. White painted steel door assembly with clear tempered glass lens, retention hinge and latch. Coated lamps provide optimum performance. Ballast: All ballasts are 100% factory tested. HPS: Constant wattage autotransformer. MH: 200-400W fixtures shipped within the U.S. require super CWA pulse start ballasts which are 88% efficient and EISA-legislation compliant (must specify SCWA option). CSA, NOM or INTL options required for probe start shipments outside the U.S. Socket: Mogul-base porcelain socket with copper alloy, nickel-plated screw shell and center contact. UL Listed 1500W, 600V, 4KV pulse rated. 2' X 2' Recessed Squares GPV: 2' nominal aperture. Power door contains all electrical components. Prewired 7', 16-gauge leads and 90 connector, no flex. Power door swings down for easy access or can be removed for servicing. Overlapping flange kit (GPFKIT) available for non-t-bar applications. GS: components factory assembled to the pan and ready to lay in a 2' x 2' grid ceiling. Pre-wired 7', 16-gauge leads and 90 connector, no flex. UL Listed. CSA Certified. UL Listed for recessed mounting and damp locations. ORDERING INFORMATION For shortest lead times, configure products using bolded options. Example: GPV 400M 9AGL TB SCWA Series Lamp type 1 Louver Voltage GPV Vertical lamp Metal halide 16AGL 16-cell, specular clear with glass overlay 2 TB 4 GS Enclosed vertical lamp 175M 200M 250M 320M 350M 400M 9AGL 9-cell, specular clear with glass overlay 2 208 2,3 240 2,3 347 Ballast SCWA Super constant wattage autotransformer RLB Regulated lag ballast For shipments to U.S. territories, SCWA must be specified to comply with EISA. Non-EISA ballast 5 (blank) Standard magnetic ballast 6 CWI Constant wattage isolated 6 SCWI Isolated SCWA 7 Options For options and accessories, see pages 433-439. 26 (66.0) D 23-3/4 (60.3) 175W-350W 400W Depth: 15-7/8 (40.3) 18-1/2 (47.0) GPV 23-3/4 (60.3) 17 (43.2) 17-3/4 (45.1) GS 23-3/4 (60.3) 23-3/4 (60.3) 1 Mogul-base lamps required. Coated lamps recommended. 2 Not available on GS products. 3 Requires CWI or RLB option in Canada for metal halide. Available for 175-400W only. 4 Optional multi-tap ballast (V, 208V, 240V, V; V, V, 347V in Canada). 5 Available for shipments outside of U.S. only. 6 175-400W metal halide only. 7 400W metal halide only. 426 1-800-315-4963 www.lithonia.com
PRODUCT INFORMATION Use in hard ceiling and T-bar applications with low mounting heights that require optimum horizontal illumination with brightness control. Ideal for office, retail and commercial areas. Prismatic tempered glass lens with polycarbonate underlay suitable for gymnasiums and racquet-ball courts. Certain airborne contaminants can diminish integrity of acrylic. Refer to Acrylic Environmental Compatibility tables on pages 794-795 for suitable uses. Housing: 20-gauge steel housing with high reflectance, white polyester paint. Anodized aluminum top reflector. Door assemblies available with choice of prismatic tempered glass, prismatic acrylic and tempered prismatic glass with polycarbonate underlay. Door attaches to housing with T-hinges and two opposing cam latches for positive retention. G3V series rough service door assembly secured by additional four screws. Ballast: All ballasts are 100% factory tested. HPS: Constant wattage autotransformer. MH: 200-400W fixtures shipped within the U.S. require super CWA pulse start ballasts which are 88% efficient and EISA-legislation compliant (must specify SCWA option). CSA, NOM or INTL options required for probe start shipments outside the U.S. Thermally activated insulation detector included. mogul base socket with screw shell and center contact. For use with O-rated, protected metal halide 2' x 2' lay-in housing design with power door containing all electrical components. Pre-wired 7', 16-gauge leads and 90 connector, no flex. G2V: Power door swings down for easy access or can be removed for servicing. G3V: Uses four Philips flathead retaining screws for positive door retention. Overlapping flange kit available (GFKIT) for non-t-bar applications. UL Listed. CSA Certified. UL Listed for recessed mounting and damp locations. 2' X 2' Recessed Squares G 2V G3V Prismatic Lenses GENERAL AREA LIGHTING ORDERING INFORMATION For shortest lead times, configure products using bolded options. Example: G2V 400M FW T73 SCWA Series Lamp type 1 Door 8 Shielding Voltage Ballast G2V G3V Metal halide 175M 200M 250M 320M 350M 400M RW Regressed white aluminum FWS Flush white steel 2 FW Flush white aluminum T73 Tempered prismatic glass lens 84YGL Holophane #8224Y acrylic lens with tempered glass overlay A12GL Prismatic acrylic lens with tempered glass overlay T73/PCL Tempered prismatic glass lens with polycarbonate underlay 3 TB 6 208 4,5 240 4,5 347 For shipments to U.S. territories, SCWA must be specified to comply with EISA. SCWA Super constant wattage autotransformer standard RLB Regulated lag ballast Non-EISA ballast 7 (blank) Standard magnetic ballast 9 CWI Constant wattage isolated 9 SCWI Isolated SCWA 10 CONFIGURATIONS DOOR FRAMES G2V G3V RW Option Option FWS Standard N/A FW Option Standard 26 (66.0) 175-350W 400W Depth: 11-7/8 (30.2) 14-1/2 (36.8) D 23-3/4 (60.3) 23-3/4 (60.3) 1 Mogul-base lamps required. Coated lamps recommended. 2 Available with G2V luminaires only. 3 Available with G3V luminaires only. 4 Requires CWI or RLB option in Canada for metal halide. Available for 175-400W only. 5 220V and 240V 50Hz and 60Hz ballasts available for use with U.S, metal halide lamps. 6 Optional multi-tap ballast (V, 208V, 240V, V; V, V, 347V in Canada). 7 Available for shipments outside of U.S. only. 8 See Configurations table for availabilty. 9 175-400W metal halide only. 10 400W metal halide only. www.lithonia.com 1-800-315-4963 427
CONTROL SYSTEMS PRODUCT INFORMATION KILOWATCH KWR KWTXTD KiloWatch dual-level HID luminaire option provides capability to switch ballast between high-mode and low-mode operation. Choose from 100% to 50% power operation or 100% to 50% lumen output operation. Luminaires must be combined with motion sensors, photocells and/or control transformers for complete system. Ideal for energy reduction or light level control in warehouses, storage areas, parking garages, shipping docks and gymnasiums. System Features Components: KWTD: Time delay control. Solid-state, digital timing circuit automatically provides high mode startup of each lamp for 15 minutes, guaranteeing lamp stabilization. For V AC manually switched or V AC photocell (KWPC) applications. KWTXTD: Time delay control voltage transformer. Provides V AC control circuit power for 208/240//347/480V AC applications controlled by photocells or manual switching*. Includes solidstate, digital timing circuit for automatic high mode start-up of each lamp for 15 minutes, guaranteeing lamp stabilization. One KWTXTD required for each on/off control zone of up to 30 fixtures. KWTX: Control voltage transformer. Provides V AC control circuit power for 208/240/347/480V AC applications in conjunction with KWIR motion sensors. High mode start-up of each lamp for 20 minutes performed by KWIR sensors. One KWTX required for each on/off control zone of up to 30 fixtures. KWIR: Passive infrared motion sensor. Switches V or V control relays in each lighting fixture based on occupancy. Sensor detects moving temperature differentials against background radiation. When motion is detected, lighting system is switched to high mode for one to 20 minutes (field adjustable) after motion no longer is detected. Sensor includes timing circuit for automatic high mode start-up for 20 minutes. Sensor is factory-preset at optimum performance angle (43 ) and can be field-adjusted. Sensor is designed for use in indoor applications with 15' to 35' mounting heights where a long and narrow coverage pattern is desired (14 F to 160 F). KWIR WA: Passive infrared motion sensor. Same as KWIR sensor with wide angle lens designed for use in indoor applications with 7' to 8' mounting heights where a short, wide coverage pattern is desired (14 F to 160 F). KWIR LT: Passive Infrared motion sensor. Same as KWIR sensor designed for low temperature operation (-40 F to 160 F). KWPC: Photo-diode sensors. Sensors switch luminaires to low output based on predetermined ambient illumination levels (field adjustable). Luminaires: KiloWatch options listed below only are available with CWA/SCWA ballast configurations. The desired option must be designated in the fixture catalog number. KW1: Reduces wattage by 50% (light output reduces by 70-80%). Luminaire supplied with V AC control components for use with all manually switched*, KWPC photocell (/208/240//347/480V) or KWIR sensor (/208/240/347/480V) controlled systems. KW150: Reduces light output by 50% (power reduces by 30-40%). Luminaire supplied with V AC control components Multi-Level Lighting for use with all manually switched*, KWPC photocell (/208/240//347/480V), or KWIR motion sensor (/208/240/347/480V) controlled systems. KW4: Reduces wattage by 50% (light output reduces by 70-80%). Luminaire supplied with V AC control components. For use with KWIR motion sensor controlled systems. KW450: Reduces light output by 50% (power reduces by 30-40%). Luminaire supplied with V AC control components for use with KWIR motion sensor-controlled systems. Consult factory when using RELOC wiring with KiloWatch. Lamp manufacturers require 100 hours high-mode burn-in of new lamps prior to low-mode operation and 15 to 20 minutes of high-mode operation thereafter upon start-up. Not for use with dualwattage-rated lamps. * Manual switches and wall boxes by others. Consult factory for field startup service. ORDERING INFORMATION Lead times will vary depending on options. Consult with your sales representative. Example: TH 400MP A16 SCWA KW4 Series Lamp type Reflector Voltage Ballast Options TE TH TPG TPGE TX TGL TGR High pressure sodium 150S 250S 400S 100S Protected metal halide 175MP 200MP 250MP 400MP 450MP 1000MP Metal halide 175M 200M 250M 320M 350M 400M 450M 1000M Consult individual product pages for reflector options. 208 240 347 480 SCWA Super constant wattage autotransformer KW1 1 KW150 2 KW4 3 KW450 4 1 Manual control switches and boxes by others. 2 Consult factory when using RELOC wiring. 3 Sensors have automatic timer to keep fixture in high mode for 20 minutes after start-up. 4 V control relay for V sensor applications only. 50% light output. 428 1-800-315-4963 www.lithonia.com
PRODUCT INFORMATION Multi-Level Lighting MANUAL CONTROLS NOMENCLATURE KWTD KWTXTD ACCESSORIES/CONFIGURATIONS ORDER SEPARATELY DESCRIPTION SYSTEM FOR V AC (ONE COMPONENT) Time delay control, manually switched. Automatic timer keeps fixtures in high mode for 15 minutes after start-up. 1 4 SYSTEM FOR 208/240//347/480V AC (ONE COMPONENT) Control voltage transformer with time delay. Steps supply voltage down for V control. Automatic timer keeps fixture in high mode for 15 minutes after start-up. 1 4 CONTROL SYSTEMS KWIR Passive infrared motion sensor. 2,3 4,5 4 MOTION SENSOR CONTROLS KWIR LT Passive infrared motion sensor, low temperature (-30 C). 2,3 4,5 4 KWIR WA Passive infrared motion sensor, wide angle. 2,3 4,5 4 KWTX Control voltage transformer. Steps supply voltage down for V control. 4 KWPC Photocell. 4 4 PHOTOTCELL CONTROLS KWTD Time delay control. Automatic timer keeps fixture in high mode for 15 minutes after start-up. 4 KWTXTD Control voltage transformer with time delay. Steps supply voltage down for V control. Automatic timer keeps fixture in high mode for 15 minutes after start-up. 1 4 = Accessory available. KWTX/KWTXTD KWIR KWPC Top View Distance (feet) Mount height (feet) Side View Distance (feet) KWIR-WA Motion Detector Coverage The sensor coverage shown is under ideal conditions. Consult specification sheets for specific information. The KWIR-WA mounted at 8' has coverage zone of and distance of 40'. 1 Manual control switches and wall boxes by others. 2 Consult factory when using with RELOC wiring. 3 Sensors have automatic timer to keep fixture in high mode for 20 minutes after start-up. 4 Must add KW1 or KW150 to fixture description V control. 5 Must add KW4 or KW450 to fixture description V control. www.lithonia.com 1-800-315-4963 429
CONTROL SYSTEMS PRODUCT INFORMATION KILOWATCH II The KiloWatch II integral sensor system provides individual luminaire dual-level lighting control for maximum energy savings and flexibility. Each luminaire contains an integral sensor that mounts directly to the reflector. Application opportunities include warehouses or select storage areas within manufacturing facilities. Certain airborne contaminants can diminish integrity of acrylic. Refer to Acrylic Environmental Compatibility tables on pages 794-795 for suitable uses. System Features Integral passive infrared motion sensor mounts to the reflector and connects to the ballast housing with flexible metal conduit to control one luminaire based on occupancy. Sensor detects moving temperature differentials against background radiation. When motion is detected, luminaire is switched to high mode for 1.25 to 20 minutes (field adjustable) after motion no longer is detected. Sensor includes timing circuit for automatic high-mode startup of lamp for 20 minutes. A self-timing, 100-hour high-mode burn function is field-activated for initial operation of a new lamp. Sensor is designed for use in indoor applications with 15' to 45' mounting heights. Sensor provides 360 of coverage within the luminaire's lighting distribution. Standard operating temperature range from 14 F to 131 F (-10 C to 55 C). Low temperature option (LT) range from -40 F to 131 F (-40 C to 55 C). KiloWatch II options only are available with SCWA ballast configurations. The desired option must be designated at the end of the catalog number. TH/TX Series with KW1S option: Reduces wattage by 50%. (Light output reduces by 70-80%.) Luminaire supplied with motion sensor control and sensor mounting bracket. TH/TX Series with KW1S LT option: Reduces wattage by 50%. (Light output reduces by 70-80%.) Luminaire supplied with motion sensor control for low temperature and sensor mounting bracket. Multi-Level Lighting SE/SH/SX/SPG Series with ISM option: Reduces wattage by 50%. (Light output reduces by 70-80%.) Luminaires supplied with motion sensor control and sensor mounting bracket. For GEB electronic ballast only. UL Listed to U.S. and Not for use with dualwattage rated lamps. Lamp manufacturer requires 100 hours high-mode burn-in of new lamps prior to low-mode operation and 15 to 20 minutes of high-mode operation thereafter upon start-up. ORDERING INFORMATION Lead times will vary depending on options. Consult with your sales representative. Example: TH 400MP PA22 SCWA KW1S Series Lamp type Reflector Voltage Ballast Options SE SH SPG SX TE TH TX High pressure sodium 1 150S 250S 400S 1000S Protected metal halide 175MP 200MP 250MP 400MP 450MP 1000MP See pages 431 for details on protected lamps. Metal halide 175M 200M 250M 320M 350M 400M 450M 1000M E17 E22 A15 A16 A17 A22 A14 A26 A30 A23 A20 A125 A165 PA16 PA22 PA22C PA25ALE PA25D PA22GLE PA22N 208 240 347 480 TVOLT HEB Electronic ballast SCWA Super constant wattage autotransformer Non-EISA ballast (blank) CWA 2 For options and accessories, see pages 433-439. 0 5 10 Mount height (feet) 15 20 25 30 35 40 45 30 20 10 0 10 20 30 Sensor Coverage (feet) 1 Not available in steel housing. 2 For shipments outside U.S. territories only. 175-450W metal hailde only. 430 1-800-315-4963 www.lithonia.com
PRODUCT INFORMATION Protected Sockets Mogul Lamp Socket and Metal Halide Mogul Lamp Base Differences Lithonia Lighting only accepts orders for indoor metal halide products that can use either ANSI Type-E (enclosed) or ANSI Type-S (suitable) rated lamps if those fixtures also have a tempered glass lens. This means all indoor metal halide products with open reflectors OR with acrylic or polycarbonate lenses are only available with protected (pink) sockets. ANSI Type E Type E metal halide lamps are enclosed-rated and only suitable for enclosed luminaires that have a glass lens or plastic lens rated for arc tube containment. These lamps have a standard mogul base design with a broad contact point as shown. Typical for 175-1500W metal halide lamps. ANSI Type S Type S metal halide lamps are rated suitable for use in enclosed luminaires or in open luminaires if certain lamp manufacturer operating conditions are followed. These lamps have a standard mogul base design with a broad contact point as shown. The Type S lamp rating is currently applied to metal halide lamps 350W or greater for replacement of existing lamps. Standard Mogul Base Sockets Standard sockets are constructed of porcelain and are white in color. The center contact tab will accept ANSI Type E, S and O rated lamps. These sockets will continue to be used for metal halide HID lamps in indoor luminaires with enclosed optics. Protected Mogul Base Sockets Protected sockets are constructed of porcelain and are pink in color. The center contact tab is surrounded by a barrier that excludes ANSI Type E and S lamps by preventing contact between the center pin on the lamp base and center tab on the lamp socket. Type O rated lamps have a narrow center pin that fits in the barrier to make contact with the center tab. These sockets will be required for indoor HID metal halide luminaires with open optics to comply with 2005 NEC. TECHNICAL INFORMATION ANSI Type O Type O metal halide lamps are open-rated protected lamps for use in open or enclosed luminaires. These lamps have "EX" style exclusionary bases designed specifically for operation with pink protected sockets. The mogul bases of these lamps have a narrow contact point designed for protected lamp sockets. Type O lamps most commonly have a cylindrical quartz barrier around the arc tube while some ceramic metal halide arc tubes are wrapped with wire. Typical for 175-1500W metal halide lamps. Type O "EX" mogul base Type E and S mogul base Type O lamp in white standard mogul socket Type E and S lamp in white standard mogul socket Type O lamp in pink protected mogul socket Type E and S lamp in pink protected mogul socket Fixture Weights HOUSING LAMP TYPE REFLECTOR WEIGHT (LBS) TPG 150S, 200S, 250S,400S PG16 34 TPG 400S, 1000S PG21 55 TPG 400M PG16 34 TPG 400M, 1000M PG21 55 TPG 150S, 200S, 250S,400S PG16A 36.2 TPG 400S, 1000S PG21A 55 TPG 400M PG16A 36.2 TPG 400M, 1000M PG21A 55 TPGE 150S, 200S, 250S,400S PG16GLE 36.8 TPGE 400S, 1000S PG21GLE 55 TPGE 175M, 250M, 400M PG16GLE 36.8 TPGE 400M, 1000M PG21GLE 55 TPGE 150S, 200S, 250S,400S PG16AGLE 38.8 TPGE 400S, 1000S PG21AGLE 55 TPGE 175M, 250M, 400M PG16AGLE 38.8 TPGE 400M, 1000M PG21AGLE 55 TXF 250S PA25ALEF 37 TXF 250S A30F 29.5 TXF 400S PA25ALEF 37 TXF 400S A30F 29.5 TXF 250M PA25ALEF 37 TXF 250M A30F 29.5 TXF 400M PA25ALEF 37 TXF 400M A30F 29.5 TGR 70S 14 TGR 100S 14 TGR 150S 14 TGR 100M 14 TGL 70S 15 TGL 100S 15 TGL 150S 15 TGL 100M 15 TGL 175M 15 TGL 250M 15 HOUSING LAMP TYPE REFLECTOR WEIGHT (LBS) TX 250S PA22GLE 35.8 TX 250S PA25ALE 39 TX 400S PA22GLE 35.8 TX 400S PA25ALE 39 TX 250M PA22GLE 35.8 TX 250M PA25ALE 39 TX 400M PA22GLE 35.8 TX 400M PA25ALE 39 TX 250S PA22C 31 TX 250S PA25D 34 TX 400S PA22C 31 TX 400S PA25D 34 TX 250M PA22C 31 TX 250M PA25D 34 TX 350M PA22C 31 TX 350M PA25D 34 TX 400M PA22C 31 TX 400M PA25D 34 TX 50S, 70S, 100S A20 17 TX 150S, 200S, 250S A20 17 TX 250S, 400S A26 32 TX 100M, 175M, 250M A20 17 TX 250M, 400M A26 32 TX 250S, 400S A30 25.5 TX 250S, 400S A23 21 TX 250M, 400M A23 21 TX 70S, 100S 150S A125 23 TX 200S, 250S A125OB 23 TX 200S, 250, A165 30 TX 400S A1650B 30 TX 100M A125 23 TX 100M, 175, 250M A165 30 TX 400M A165OB 30 TX 70S, 100S, 150S A121 23 TX 200S, 250S A121OB 23 TX 200S, 250S A162 30 TX 400S A162OB 30 TX 100M A121 23 TX 100M, 175M, 250M A162 30 TX 400M A1620B 30 HOUSING LAMP TYPE REFLECTOR WEIGHT (LBS) TH 250S PA22N 31 TH 400S PA22 31 TH 400S PA22N 31 TH 1000S PA25 48 TH 175M PA22E 25 TH 250M PA22E 25 TH 400M PA22 31 TH 400M PA22L 31 TH 400M PA22N 31 TH 1000M PA25 48 TH 70S, 100S, 150S A17 25 TH 250S, 400S A17 25 TH 1000S A22 56 TH 400M A17 25 TH 1000M A22 56 TH 70S, 100S, 150S A16 24.2 TH 250S, 400S A16 24.2 TH 175M A16 24.2 TH 250M A16 24.2 TH 400M A16 24.2 TH 250S A16GL 25 TH 400S A16GL 25 TH 175M A16GL 25 TH 200M A16GL 25 TH 250M A16GL 25 TH 400M A16GL 25 TH 250S A15 21 TH 400S A15 21 TH 400M A15 21 TH 150S A14 27 TH 200S A14 27 TH 250S A14 27 TH 400S A14 27 TH 400M A14 27 TE 70S, 100S, 150S, 200S E17 31 TE 250S, 400S E17 31 TE 400S, 1000S E22 50 TE 175M, 250M, 400M E17 31 TE 400M, 1000M E22 50 www.lithonia.com 1-800-315-4963 431
TECHNICAL INFORMATION PRODUCT INFORMATION HIGH BAYS (ADJUSTABLE) HOUSING REFLECTOR WATTAGE STANDARD BALLAST S/MH* SH A14 400MP GEB 2.4 SH A15 400MP GEB 1.7 SH A16, A16GL 400MP GEB 1.2-1.9 SH PA22 400MP GEB 1.2-2.1 SH PA22N 400MP GEB 0.8-2.1 TH A14 150S HX-HPF 2.7 TH A14 200S HX-HPF 2.5 TH A14 250S CWA 2.5 TH A14 400S CWA 2.5 TH A14 400MP SCWA 2.4 TH A15 250S CWA 1.5 TH A15 400S CWA 1.5 TH A15 400MP SCWA 1.7 TH A16, A16GL 70S HX-HPF 0.9-1.8 TH A16, A16GL 100S HX-HPF 0.9-1.8 TH A16, A16GL 150S HX-HPF 0.9-1.8 TH A16, A16GL 200S CWA 1.1-1.9 TH A16, A16GL 250S CWA 1.1-1.9 TH A16, A16GL 400S CWA 1.1-1.9 TH A16, A16GL 175MP SCWA 1.2-2.1 TH A16, A16GL 250MP SCWA 1.2-2.1 TH A16, A16GL 400MP SCWA 1.2-1.9 TH A17 70S HX-HPF 0.9-1.8 TH A17 100S HX-HPF 0.9-1.8 TH A17 150S HX-HPF 0.9-1.8 TH A17 200S CWA 0.8-2.0 TH A17 250S CWA 0.8-2.0 TH A17 400S CWA 0.8-1.9 TH A17 400MP SCWA 0.8-1.8 TH A22 1000S CWA 0.8-1.6 TH PA22N 250S CWA 0.8-2.0 TH PA22N 400S CWA 0.8-2.0 TH PA22N 400MP SCWA 0.8-2.1 TH PA22 400S CWA 1.3-2.0 TH PA22 400MP SCWA 1.2-2.1 TH PA22E 175MP SCWA 1.3-2.0 TH PA22E 250MP SCWA 1.3-2.0 TH PA25 1000S CWA 1.3-2.2 TH PA25 1000M CWA 1.6-2.2 * Spacing to mounting height. HIGH BAYS (NON-ADJUSTABLE) HOUSING REFLECTOR WATTAGE STANDARD SPACING TO MOUNTING HEIGHT BALLAST N C M S W SPG PG15 GEB 0.7 1.0 1.3 1.7 2.1 SPG PG15 GEB 0.7 1.0 1.3 1.7 2.1 SPG PG15 400MP GEB 0.7 1.0 1.3 1.7 2.1 TPG PG16 150S HX-HPF 0.7 1.0 1.3 1.7 2.0 TPG PG16 200S CWA N/A 0.8 1.2 1.6 1.9 TPG PG16 250S CWA N/A 0.8 1.2 1.6 1.9 TPG PG16 400S CWA N/A 0.8 1.2 1.7 2.0 TPG PG16 400MP SCWA 0.7 1.0 1.3 1.7 2.0 TPG PG21 400S CWA N/A 1.1 N/A N/A N/A TPG PG21 400MP SCWA 0.7 N/A N/A N/A N/A TPG PG21 1000S CWA N/A N/A 1.5 N/A N/A TPG PG21 1000M CWA N/A 0.9 N/A N/A N/A TPG PG16A 150S HX-HPF 0.7 0.8 1.1 1.4 1.6 TPG PG16A 200S CWA N/A 0.8 1.3 1.7 2.0 TPG PG16A 250S CWA N/A 0.8 1.3 1.7 2.0 TPG PG16A 400S CWA N/A 1.2 1.4 1.7 2.0 TPG PG16A 400MP SCWA 0.7 1.0 1.3 1.7 2.1 TPG PG21A 400S CWA N/A 1.1 N/A N/A N/A TPG PG21A 400MP SCWA 0.8 N/A N/A N/A N/A TPG PG21A 1000S CWA N/A N/A 1.6 N/A N/A TPG PG21A 1000M CWA N/A 1.2 N/A N/A N/A TPGE PG16GLE 150S HX-HPF N/A 0.9 1.3 1.5 1.8 TPGE PG16GLE 200S CWA N/A 0.9 1.5 1.7 2.0 TPGE PG16GLE 250S CWA N/A 0.9 1.5 1.7 2.0 TPGE PG16GLE 400S CWA N/A 0.8 1.3 1.7 2.2 TPGE PG16GLE 175MP SCWA 0.6 0.8 1.3 1.6 1.9 TPGE PG16GLE 250MP SCWA 0.6 0.8 1.3 1.6 1.9 TPGE PG16GLE 400MP SCWA 0.7 0.9 1.3 1.6 1.9 TPGE PG21GLE 400S CWA N/A 1.0 N/A N/A N/A TPGE PG21GLE 400MP SCWA 0.9 N/A N/A N/A N/A TPGE PG21GLE 1000S CWA N/A 1.4 N/A N/A N/A TPGE PG21GLE 1000M CWA N/A 1.2 N/A N/A N/A TPGE PG16AGLE 150S HX-HPF N/A 0.8 1.2 1.5 1.8 TPGE PG16AGLE 200S CWA N/A 1.6 1.8 2 2.2 TPGE PG16AGLE 250S CWA N/A 1.6 1.8 2 2.2 TPGE PG16AGLE 400S CWA N/A 1.0 N/A N/A N/A TPGE PG16AGLE 175MP SCWA N/A 1.3 1.5 1.7 2.0 TPGE PG16AGLE 250MP SCWA N/A 1.3 1.5 1.7 2.0 TPGE PG16AGLE 400MP SCWA 0.8 1.2 1.4 1.6 1.9 TPGE PG16AGLE 400S CWA N/A 1.0 N/A N/A N/A TPGE PG16AGLE 400MP SCWA 0.8 N/A N/A N/A N/A TPGE PG16AGLE 1000S CWA N/A 0.8 N/A N/A N/A TPGE PG16AGLE 1000M CWA N/A 1.1 N/A N/A N/A TE E17 70S HX-HPF N/A 1.0 1.3 1.5 1.9 TE E17 100S HX-HPF N/A 1.0 1.4 1.5 1.9 TE E17 150S HX-HPF N/A 1.0 1.3 1.6 1.8 TE E17 200S CWA 0.8 1.1 1.3 1.5 1.9 TE E17 250S CWA 0.8 1.1 1.3 1.5 1.9 TE E17 400S CWA N/A N/A 1.2 1.5 1.9 TE E17 175MP SCWA N/A 1.0 1.4 1.6 2.0 TE E17 250MP SCWA N/A 1.0 1.3 1.6 1.9 TE E17 400MP SCWA N/A N/A 1.4 1.6 1.9 TE E22 400S CWA 0.8 1.1 N/A N/A N/A TE E22 400MP SCWA 0.8 1.0 N/A N/A N/A TE E22 1000S CWA 0.8 1.0 N/A N/A N/A TE E22 1000M CWA N/A N/A 1.0 1.3 1.6 Spacing to Mounting Height LOW BAYS HOUSING REFLECTOR WATTAGE STANDARD BALLAST S/MH* SX A23 400MP GEB 1.7 TX A20 50S HX-HPF 1.9 TX A20 70S HX-HPF 1.8 TX A20 100S HX-HPF 1.9 TX A20 150S HX-HPF 1.9 TX A20 200S CWA 1.9 TX A20 250S CWA 1.7 TX A20 100M HX-HPF 1.8 TX A20 175MP SCWA 1.8 TX A20 250MP SCWA 1.7 TX A23 250S CWA 1.6 TX A23 400S CWA 1.6 TX A23 250MP SCWA 1.7 TX A23 400MP SCWA 1.7 TX A26 250S CWA 2.0 TX A26 400S CWA 2.0 TX A26 250MP SCWA 2.2 TX A26 400MP SCWA 2.2 TX A30 250S CWA 2.0 TX A30 400S CWA 2.0 TX A30 250MP SCWA 2.1 TX A30 400MP SCWA 2.1 TX A121 100M HX-HPF 1.8 TX A125 70S HX-HPF 1.8 TX A125 100S HX-HPF 1.8 TX A125 150S HX-HPF 1.8 TX A125 200S CWA 2.7 TX A125 250S CWA 2.6 TX A162 100M HX-HPF 1.3 TX A162 175MP SCWA 1.3 TX A162 250MP SCWA 1.3 TX A162 400MP SCWA 1.8 TX A165 200S CWA 1.9 TX A165 250S CWA 2.6 TX A165 400S CWA 1.8 TX PA22GLE 250S CWA 1.6 TX PA22GLE 400S CWA 1.6 TX PA22GLE 250MP SCWA 1.7 TX PA22GLE 400MP SCWA 1.7 TX PA25ALE 250S CWA 1.1 TX PA25ALE 400S CWA 1.1 TX PA25ALE 250MP SCWA 1.2 TX PA25ALE 400MP SCWA 1.2 TX PA22C 250S CWA 2.7 TX PA22C 400S CWA 2.7 TX PA22C 250MP SCWA 3.0 TX PA22C SCWA 2.8 TX PA22C 400MP SCWA 2.8 TX PA25D 250S CWA 2.4 TX PA25D 400S CWA 2.4 TX PA25D 250MP SCWA 2.8 TX PA25D SCWA 2.5 TX PA25D 400MP SCWA 2.8 TXF A30F 250S CWA 2.0 TXF A30F 400S CWA 2.0 TXF A30F 250MP SCWA 2.1 TXF A30F 400MP SCWA 2.1 TXF PA25ALEF 250S CWA 1.1 TXF PA25ALEF 400S CWA 1.1 TXF PA25ALEF 250MP SCWA 1.2 TXF PA25ALEF 400MP SCWA 1.2 TGL A165 70S HX-HPF 2.3 TGL A165 100S HX-HPF 2.3 TGL A165 150S HX-HPF 2.3 TGL A165 100M HX-HPF 1.2 TGL A165 175MP SCWA 1.7 TGL A165 250MP SCWA 1.7 TGR A125 70S HX-HPF 1.8 TGR A125 100S HX-HPF 1.7 TGR A125 150S HX-HPF 1.8 TGR A125 100M HX-HPF 1.7 TGR A125 175MP SCWA 1.8 432 1-800-315-4963 www.lithonia.com
See Options & Accessories table on page 439 for compatibility. Quartz Lamp Options EC ORDERING INFORMATION QRS QRSTD Emergency circuit. Factory-installed, double-contact, V bayonet-base quartz socket with socket leads for use with separate external emergency power system. Reference Quartz Lamp Wattage table for maximum wattage. V quartz lamp not included. Quartz restrike system. Factory-installed, double-contact, bayonet-base quartz socket with socket leads. Automatically switches quartz lamp on if there is a power interruption or brownout significant enough to cause the primary HID lamp to drop out. The quartz lamp stays on until the HID fixture restrikes. QRS does not energize during cold start of HID luminaires. Wiring for the quartz lamp is internal to the ballast assembly; the ballast supplies voltage required to operate the quartz lamp. The fixture must be energized for quartz lamp to operate. Reference Quartz Lamp Wattage table for maximum wattage. V quartz lamp not included. Quartz restrike system time delay. Factory-installed, double-contact, bayonet-base quartz socket with socket leads. Functions same as QRS, but quartz lamp energizes under hot and cold starting conditions. Quartz lamp will come on when luminaire is energized and remain on for two minutes after startup or restrike. Wiring for the quartz lamp is internal to the ballast assembly; the ballast supplies voltage required to operate the quartz lamp. The fixture must be energized for quartz lamp to operate. Reference Quartz Lamp Wattage table for maximum wattage. V quartz lamp not included. EC/QRS/QRSTD OPTIONS & ACCESSORIES TH A14 A15 A16 A17 A22 SH A15 A16 QUARTZ LAMP WATTAGE TABLE (Maximum rating for EC, QRS and QRSTD options) QUARTZ MAXIMUM WATTAGE TX PA22GLE PA22C PA25D PA25ALE TXF PA25ALEF SX TH PA22 HID TE PA22N TH TX TPGE TPGE TX MAX E17 TH SH PA22L TH A162 TGR PG16GLE PG16AGLE A121 WATTAGE E22 A16GL PA22 PA22E PA25 PA22GLE SX A23 A165 TGL PG15 PG21GLE PG21AGLE A125 150M N/A N/A N/A N/A N/A N/A 100 100 100 100 N/A N/A N/A 100 175M 100 100 100 150 150 150 150 150 100 100 150 150 150 N/A 200M 150 150 100 150 150 150 150 150 100 N/A 150 150 150 N/A 250M 250 250 100 250 150 150 150 250 100 N/A 250 150 150 N/A 300M 250 250 100 250 150 150 150 250 100 N/A 250 150 150 N/A 320M 250 250 100 250 150 150 150 250 100 N/A 250 150 150 N/A 350M 250 250 100 250 150 150 150 250 100 N/A 250 150 150 N/A 400M 250 250 100 250 150 150 150 250 100 N/A 250 150 150 N/A 450M 250 250 100 250 150 150 150 250 100 N/A 250 150 150 N/A 750M 250 250 N/A N/A N/A 150 N/A N/A N/A N/A 250 150 150 N/A 875M 250 250 N/A N/A N/A 150 N/A N/A N/A N/A 250 150 150 N/A 1000M 150 250 N/A N/A N/A 150 N/A N/A N/A N/A 250 150 150 N/A 50S N/A N/A N/A N/A N/A N/A N/A 100 N/A N/A N/A N/A N/A 100 70S 100 100 N/A N/A N/A N/A N/A 100 100 100 N/A N/A N/A 100 100S 100 100 100 100 100 100 100 100 100 100 100 100 100 100 150S 150 150 150 150 150 150 150 150 100 100 150 100 100 100 200S 150 150 150 150 150 150 150 150 100 100 150 100 100 100 250S 250 250 150 250 150 150 150 250 100 100 250 250 250 100 400S 250 250 150 250 150 150 150 250 100 N/A 250 250 250 N/A 1000S 250 250 N/A N/A N/A 150 150 N/A N/A N/A 500 250 250 N/A TX A20 A23 A26 A30 TXF A30F TPG PG16 PG21 PG16A PG21A SPG www.lithonia.com 1-800-315-4963 433
ORDERING INFORMATION OPTIONS & ACCESSORIES SF DF HA (Die-cast aluminum) See Options & Accessories table on page 439 for compatibility. Ballast Housing Options & Accessories SF DF HA Single fuse. Use with V, V, 347V. Externally accessible in-line fusing isolates luminaire from circuit. Specify tap voltage if combined with multi-tap ballast (TB1=V, TB4=V, TB5=34V7) or five-tap ballast (TBV1=V, TBV4=V). Double fuse. Use with 208V, 240V, 480V. Externally accessible in-line fusing isolates luminaire from circuit. Specify tap voltage if combined with multi-tap ballast (TB2=208V, TB3=240V) or five-tap ballast (TBV2=208V, TBV3=240V, TBV6=480V). High ambient. Allows the industrial luminaires to be operated in higher ambient temperatures. TX low bay series is 55 C. TH, TE, TPG, TPGE high bay series is 65 C. Large die-cast aluminum ballast housing included for TH, TE, TX, TPG, TPGE. Steel housing SH, SX, SPG series is 55 C and includes external heat shield. HA (Steel housing) WL TR RC3NP Wet location label. Signifies that the luminaire meets all UL requirements for proper, safe operation in environments subject to spray of non-corrosive and nonflammable liquids. Fixture requires rigid pendant mounting or wet location HC3PC3RWT assembly. Remote ballast luminaire. Add TR to end of complete fixture catalog number. Includes ballast housing, optic and appropriate remote optical splice box. Does not include interconnecting wiring. Ballast, optic and splice box ship separately. Remote ballast luminaire with pre-wired cord. Add RC3NP to end of complete fixture catalog number. Includes ballast housing, optic and appropriate remote optical mounting box and 3' of pre-wired cable harness with male and female 20A twist lock plug (C3NP) factory attached. Ballast, optic and splice box ship separately. TR RC3NPWL SCK Remote ballast luminaire with pre-wired cord for wet location. Add RC3NPWL to end of complete fixture catalog number. Same as RC3NP except listed for wet location. Safety chain kit. Kit includes chain and attachment hardware for field installation. Add SCK (5 ), SCK84 (7 ), SCK (10 ) to fixture catalog number or order separately as SCK (5 ), SCK84 (7 ), SCK (10 ). Splice box Optic Options & Accessories CF Charcoal filter. Used with enclosed and gasketed luminaires. Filter prevents particulate contaminants from entering the optical assembly during start-up and cool-down periods. Filter consists of activated charcoal granules freely suspended between multiple layers of polyester filtering material. RC3NP/RC3NPWL GL17/GL22 T73 Glass lens for TH A17/A22. Frequent cleaning maintains performance. (Does not meet UL lamp rupture containment specifications.) RK1 MHINGE U kit must be specified when ordering lens separately for field modification. Corning C73. Prismatic tempered glass lens. SCK CF GL17/GL22 SF DF HA WL TR RC3NP RC3NPWL SCK CF GL17/GL22 T73 SHIPS ATTACHED SHIPS SEPARATELY 434 1-800-315-4963 www.lithonia.com