HIGH TEMPERATURE CABLES

HIGH TEMPERATURE CABLES C O N T E N T S DEF 61-12 Part 18 Type 1 LFH Equipment Wires :2 Technical Information for DEF 61-12 :8 PTFE Insulated Equipment Wire Single Core :10 PTFE EFGLAS Aircraft Cable :12 ETFE (TEFZEL) Equipment Wire Single Core :14 Intemp 20 - Single Core, Cable :16 2771D Single Core Silicone Insulated Glass Braided Cable :18 SIF Silicone Insulated Heat Resistant Single Core Cable :20 SIHSI & SIHSIGL Silicone Heat Resistant Multicore Cable :22

DEF 61-12 Part 18 Type 1 LFH Equipment Wires 120 0 C, 600V A P P L I C A T I O N For internal wiring of electronic and other equipment. Incorporates LFH (Limited Fire Hazard) insulation for reduced levels of smoke and toxic fumes in the event of a fire. S P E C I F I C A T I O N S In accordance with DEF 61-12 Part 18 Conductors: Solid or stranded tinned copper conductors to BS 2G 231. Insulation: Thin-wall LFH insulation to DEF 61-12 Part 18 for Category 1 equipment wire displaying following characteristics: Oxygen index: 30% min. Temperature index: 20 0 C min HCL emission @ 800 0 C: 0.% max Toxicity index: 0.2 Flame retardant to BS 3G 230 Temp Rating: 120 0 C max. conductor operating temperature. Voltage Rating: 600V a.c./800v d.c. :2

N.S.N. Anixter Colour Cond. Nom. Nom. Thickness Min. Max. Approx. 614-99-891- Part No. Size Cond. Cond. of O/D O/D Cable A10DW-891- AWG Area Stranding Insulation Weight mm 2 #/mm mm mm mm kgs/km 9431 9431 Red 30 0.0 1/0.2 0.20 0. 0.70 0.92 9432 9432 Blue 30 0.0 1/0.2 0.20 0. 0.70 0.92 9433 9433 Green 30 0.0 1/0.2 0.20 0. 0.70 0.92 9434 9434 Yellow 30 0.0 1/0.2 0.20 0. 0.70 0.92 943 943 Black 30 0.0 1/0.2 0.20 0. 0.70 0.92 9436 9436 White 30 0.0 1/0.2 0.20 0. 0.70 0.92 9437 9437 Brown 30 0.0 1/0.2 0.20 0. 0.70 0.92 9438 9438 Violet 30 0.0 1/0.2 0.20 0. 0.70 0.92 9439 9439 Orange 30 0.0 1/0.2 0.20 0. 0.70 0.92 9440 9440 Grey 30 0.0 1/0.2 0.20 0. 0.70 0.92 9441 9441 Pink 30 0.0 1/0.2 0.20 0. 0.70 0.92 9442 9442 Grn/Yllw 30 0.0 1/0.2 0.20 0. 0.70 0.92 9443 9443 Red 26 0.12 1/0.40 0.20 0.70 0.8 2.0 9444 9444 Blue 26 0.12 1/0.40 0.20 0.70 0.8 2.0 944 944 Green 26 0.12 1/0.40 0.20 0.70 0.8 2.0 9446 9446 Yellow 26 0.12 1/0.40 0.20 0.70 0.8 2.0 9447 9447 Black 26 0.12 1/0.40 0.20 0.70 0.8 2.0 9448 9448 White 26 0.12 1/0.40 0.20 0.70 0.8 2.0 9449 9449 Brown 26 0.12 1/0.40 0.20 0.70 0.8 2.0 940 940 Violet 26 0.12 1/0.40 0.20 0.70 0.8 2.0 941 941 Orange 26 0.12 1/0.40 0.20 0.70 0.8 2.0 942 942 Grey 26 0.12 1/0.40 0.20 0.70 0.8 2.0 943 943 Pink 26 0.12 1/0.40 0.20 0.70 0.8 2.0 944 944 Grn/Yllw 26 0.12 1/0.40 0.20 0.70 0.8 2.0 94 94 Red 23 0.28 1/0.60 0.20 0.90 1.0 3.9 946 946 Blue 23 0.28 1/0.60 0.20 0.90 1.0 3.9 947 947 Green 23 0.28 1/0.60 0.20 0.90 1.0 3.9 948 948 Yellow 23 0.28 1/0.60 0.20 0.90 1.0 3.9 949 949 Black 23 0.28 1/0.60 0.20 0.90 1.0 3.9 9460 9460 White 23 0.28 1/0.60 0.20 0.90 1.0 3.9 9461 9461 Brown 23 0.28 1/0.60 0.20 0.90 1.0 3.9 9462 9462 Violet 23 0.28 1/0.60 0.20 0.90 1.0 3.9 9463 9463 Orange 23 0.28 1/0.60 0.20 0.90 1.0 3.9 9464 9464 Grey 23 0.28 1/0.60 0.20 0.90 1.0 3.9 946 946 Pink 23 0.28 1/0.60 0.20 0.90 1.0 3.9 9466 9466 Grn/Yllw 23 0.28 1/0.60 0.20 0.90 1.0 3.9 :3

N.S.N. Anixter Colour Cond. Nom. Nom. Thickness Min. Max. Approx. 614-99-891- Part No. Size Cond. Cond. of O/D O/D Cable A10DW-891- AWG Area Stranding Insulation Weight mm 2 #/mm mm mm mm kgs/km 9467 9467 Red 19 0.63 1/0.90 0.20 1.20 1.3 7.9 9468 9468 Blue 19 0.63 1/0.90 0.20 1.20 1.3 7.9 9469 9469 Green 19 0.63 1/0.90 0.20 1.20 1.3 7.9 9470 9470 Yellow 19 0.63 1/0.90 0.20 1.20 1.3 7.9 9471 9471 Black 19 0.63 1/0.90 0.20 1.20 1.3 7.9 9472 9472 White 19 0.63 1/0.90 0.20 1.20 1.3 7.9 9473 9473 Brown 19 0.63 1/0.90 0.20 1.20 1.3 7.9 9474 9474 Violet 19 0.63 1/0.90 0.20 1.20 1.3 7.9 947 947 Orange 19 0.63 1/0.90 0.20 1.20 1.3 7.9 9476 9476 Grey 19 0.63 1/0.90 0.20 1.20 1.3 7.9 9477 9477 Pink 19 0.63 1/0.90 0.20 1.20 1.3 7.9 9478 9478 Grn/Yllw 19 0.63 1/0.90 0.20 1.20 1.3 7.9 9479 9479 Red 30 0.0 7/0.10 0.20 0.60 0.7 1.1 9480 9480 Blue 30 0.0 7/0.10 0.20 0.60 0.7 1.1 9481 9481 Green 30 0.0 7/0.10 0.20 0.60 0.7 1.1 9482 9482 Yellow 30 0.0 7/0.10 0.20 0.60 0.7 1.1 9483 9483 Black 30 0.0 7/0.10 0.20 0.60 0.7 1.1 9484 9484 White 30 0.0 7/0.10 0.20 0.60 0.7 1.1 948 948 Brown 30 0.0 7/0.10 0.20 0.60 0.7 1.1 9486 9486 Violet 30 0.0 7/0.10 0.20 0.60 0.7 1.1 9487 9487 Orange 30 0.0 7/0.10 0.20 0.60 0.7 1.1 9488 9488 Grey 30 0.0 7/0.10 0.20 0.60 0.7 1.1 9489 9489 Pink 30 0.0 7/0.10 0.20 0.60 0.7 1.1 9490 9490 Grn/Yllw 30 0.0 7/0.10 0.20 0.60 0.7 1.1 9491 9491 Red 28 0.079 7/0.12 0.20 0.6 0.80 1. 9492 9492 Blue 28 0.079 7/0.12 0.20 0.6 0.80 1. 9493 9493 Green 28 0.079 7/0.12 0.20 0.6 0.80 1. 9494 9494 Yellow 28 0.079 7/0.12 0.20 0.6 0.80 1. 949 949 Black 28 0.079 7/0.12 0.20 0.6 0.80 1. 9496 9496 White 28 0.079 7/0.12 0.20 0.6 0.80 1. 9497 9497 Brown 28 0.079 7/0.12 0.20 0.6 0.80 1. 9498 9498 Violet 28 0.079 7/0.12 0.20 0.6 0.80 1. 9499 9499 Orange 28 0.079 7/0.12 0.20 0.6 0.80 1. 900 900 Grey 28 0.079 7/0.12 0.20 0.6 0.80 1. 901 901 Pink 28 0.079 7/0.12 0.20 0.6 0.80 1. 902 902 Grn/Yllw 28 0.079 7/0.12 0.20 0.6 0.80 1. :4

N.S.N. Anixter Colour Cond. Nom. Nom. Thickness Min. Max. Approx. 614-99-891- Part No. Size Cond. Cond. of O/D O/D Cable A10DW-891- AWG Area Stranding Insulation Weight mm 2 #/mm mm mm mm kgs/km 903 903 Red 26 0.1 19/0.10 0.20 0.80 0.9 2.9 904 904 Blue 26 0.1 19/0.10 0.20 0.80 0.9 2.9 90 90 Green 26 0.1 19/0.10 0.20 0.80 0.9 2.9 906 906 Yellow 26 0.1 19/0.10 0.20 0.80 0.9 2.9 907 907 Black 26 0.1 19/0.10 0.20 0.80 0.9 2.9 908 908 White 26 0.1 19/0.10 0.20 0.80 0.9 2.9 909 909 Brown 26 0.1 19/0.10 0.20 0.80 0.9 2.9 910 910 Violet 26 0.1 19/0.10 0.20 0.80 0.9 2.9 911 911 Orange 26 0.1 19/0.10 0.20 0.80 0.9 2.9 912 912 Grey 26 0.1 19/0.10 0.20 0.80 0.9 2.9 913 913 Pink 26 0.1 19/0.10 0.20 0.80 0.9 2.9 914 914 Grn/Yllw 26 0.1 19/0.10 0.20 0.80 0.9 2.9 91 91 Red 24 0.20 19/0.12 0.20 0.90 1.0 3.4 916 916 Blue 24 0.20 19/0.12 0.20 0.90 1.0 3.4 917 917 Green 24 0.20 19/0.12 0.20 0.90 1.0 3.4 918 918 Yellow 24 0.20 19/0.12 0.20 0.90 1.0 3.4 919 919 Black 24 0.20 19/0.12 0.20 0.90 1.0 3.4 920 920 White 24 0.20 19/0.12 0.20 0.90 1.0 3.4 921 921 Brown 24 0.20 19/0.12 0.20 0.90 1.0 3.4 922 922 Violet 24 0.20 19/0.12 0.20 0.90 1.0 3.4 923 923 Orange 24 0.20 19/0.12 0.20 0.90 1.0 3.4 924 924 Grey 24 0.20 19/0.12 0.20 0.90 1.0 3.4 92 92 Pink 24 0.20 19/0.12 0.20 0.90 1.0 3.4 926 926 Grn/Yllw 24 0.20 19/0.12 0.20 0.90 1.0 3.4 927 927 Red 22 0.40 19/0.1 0.20 1.0 1.20 4.9 928 928 Blue 22 0.40 19/0.1 0.20 1.0 1.20 4.9 929 929 Green 22 0.40 19/0.1 0.20 1.0 1.20 4.9 930 930 Yellow 22 0.40 19/0.1 0.20 1.0 1.20 4.9 931 931 Black 22 0.40 19/0.1 0.20 1.0 1.20 4.9 932 932 White 22 0.40 19/0.1 0.20 1.0 1.20 4.9 933 933 Brown 22 0.40 19/0.1 0.20 1.0 1.20 4.9 934 934 Violet 22 0.40 19/0.1 0.20 1.0 1.20 4.9 93 93 Orange 22 0.40 19/0.1 0.20 1.0 1.20 4.9 936 936 Grey 22 0.40 19/0.1 0.20 1.0 1.20 4.9 937 937 Pink 22 0.40 19/0.1 0.20 1.0 1.20 4.9 938 938 Grn/Yllw 22 0.40 19/0.1 0.20 1.0 1.20 4.9 :

N.S.N. Anixter Colour Cond. Nom. Nom. Thickness Min. Max. Approx. 614-99-891- Part No. Size Cond. Cond. of O/D O/D Cable A10DW-891- AWG Area Stranding Insulation Weight mm 2 #/mm mm mm mm kgs/km 939 939 Red 20 0.60 19/0.20 0.20 1.30 1.0 7.36 940 940 Blue 20 0.60 19/0.20 0.20 1.30 1.0 7.36 941 941 Green 20 0.60 19/0.20 0.20 1.30 1.0 7.36 942 942 Yellow 20 0.60 19/0.20 0.20 1.30 1.0 7.36 943 943 Black 20 0.60 19/0.20 0.20 1.30 1.0 7.36 944 944 White 20 0.60 19/0.20 0.20 1.30 1.0 7.36 94 94 Brown 20 0.60 19/0.20 0.20 1.30 1.0 7.36 946 946 Violet 20 0.60 19/0.20 0.20 1.30 1.0 7.36 947 947 Orange 20 0.60 19/0.20 0.20 1.30 1.0 7.36 948 948 Grey 20 0.60 19/0.20 0.20 1.30 1.0 7.36 949 949 Pink 20 0.60 19/0.20 0.20 1.30 1.0 7.36 90 90 Grn/Yllw 20 0.60 19/0.20 0.20 1.30 1.0 7.36 91 91 Red 18 1.00 19/0.2 0.20 1. 1.7 10.4 92 92 Blue 18 1.00 19/0.2 0.20 1. 1.7 10.4 93 93 Green 18 1.00 19/0.2 0.20 1. 1.7 10.4 94 94 Yellow 18 1.00 19/0.2 0.20 1. 1.7 10.4 9 9 Black 18 1.00 19/0.2 0.20 1. 1.7 10.4 96 96 White 18 1.00 19/0.2 0.20 1. 1.7 10.4 97 97 Brown 18 1.00 19/0.2 0.20 1. 1.7 10.4 98 98 Violet 18 1.00 19/0.2 0.20 1. 1.7 10.4 99 99 Orange 18 1.00 19/0.2 0.20 1. 1.7 10.4 960 960 Grey 18 1.00 19/0.2 0.20 1. 1.7 10.4 961 961 Pink 18 1.00 19/0.2 0.20 1. 1.7 10.4 962 962 Grn/Yllw 18 1.00 19/0.2 0.20 1. 1.7 10.4 963 963 Red 16 1.20 19/0.30 0.20 1.80 2.00 16. 964 964 Blue 16 1.20 19/0.30 0.20 1.80 2.00 16. 96 96 Green 16 1.20 19/0.30 0.20 1.80 2.00 16. 966 966 Yellow 16 1.20 19/0.30 0.20 1.80 2.00 16. 967 967 Black 16 1.20 19/0.30 0.20 1.80 2.00 16. 968 968 White 16 1.20 19/0.30 0.20 1.80 2.00 16. 969 969 Brown 16 1.20 19/0.30 0.20 1.80 2.00 16. 970 970 Violet 16 1.20 19/0.30 0.20 1.80 2.00 16. 971 971 Orange 16 1.20 19/0.30 0.20 1.80 2.00 16. 972 972 Grey 16 1.20 19/0.30 0.20 1.80 2.00 16. 973 973 Pink 16 1.20 19/0.30 0.20 1.80 2.00 16. 974 974 Grn/Yllw 16 1.20 19/0.30 0.20 1.80 2.00 16. :6

N.S.N. Anixter Colour Cond. Nom. Nom. Thickness Min. Max. Approx. 614-99-891- Part No. Size Cond. Cond. of O/D O/D Cable A10DW-891- AWG Area Stranding Insulation Weight mm 2 #/mm mm mm mm kgs/km 97 97 Red 14 2.00 37/0.2 0.2 2.1 2.3 20.7 976 976 Blue 14 2.00 37/0.2 0.2 2.1 2.3 20.7 977 977 Green 14 2.00 37/0.2 0.2 2.1 2.3 20.7 978 978 Yellow 14 2.00 37/0.2 0.2 2.1 2.3 20.7 979 979 Black 14 2.00 37/0.2 0.2 2.1 2.3 20.7 980 980 White 14 2.00 37/0.2 0.2 2.1 2.3 20.7 981 981 Brown 14 2.00 37/0.2 0.2 2.1 2.3 20.7 982 982 Violet 14 2.00 37/0.2 0.2 2.1 2.3 20.7 983 983 Orange 14 2.00 37/0.2 0.2 2.1 2.3 20.7 984 984 Grey 14 2.00 37/0.2 0.2 2.1 2.3 20.7 98 98 Pink 14 2.00 37/0.2 0.2 2.1 2.3 20.7 986 986 Grn/Yllw 14 2.00 37/0.2 0.2 2.1 2.3 20.7 987 987 Red 12 2.60 37/0.30 0.2 2.0 2.70 27.1 988 988 Blue 12 2.60 37/0.30 0.2 2.0 2.70 27.1 989 989 Green 12 2.60 37/0.30 0.2 2.0 2.70 27.1 990 990 Yellow 12 2.60 37/0.30 0.2 2.0 2.70 27.1 991 991 Black 12 2.60 37/0.30 0.2 2.0 2.70 27.1 992 992 White 12 2.60 37/0.30 0.2 2.0 2.70 27.1 993 993 Brown 12 2.60 37/0.30 0.2 2.0 2.70 27.1 994 994 Violet 12 2.60 37/0.30 0.2 2.0 2.70 27.1 99 99 Orange 12 2.60 37/0.30 0.2 2.0 2.70 27.1 996 996 Grey 12 2.60 37/0.30 0.2 2.0 2.70 27.1 997 997 Pink 12 2.60 37/0.30 0.2 2.0 2.70 27.1 998 998 Grn/Yllw 12 2.60 37/0.30 0.2 2.0 2.70 27.1 NB: Wire braid screened versions with or without sheath also available. Details available upon request. Minimum bend radius Flexing Applications 10D Fixed Applications 4D Where D = overall diameter of cable. For further technical information see page :8 :7

Technical Information DEF 61-12 Part 18 Type 1 LFH Equipment Wires Conductor Nom. Max. DC Max. AC Current Rating@ Size Conductor Conductor Conductor 10 0 C AWG Stranding Resistance @ 20 0 C Resistance @ 120 0 C A #/mm ohms/km ohms/km 30 1/0.2 383. 34.2 0.3 26 1/0.40 14.6 202.8 0.8 23 1/0.60 64.0 89.1 1.8 19 1/0.90 28. 39.7 4.0 30 7/0.10 336.0 468.0 0.3 28 7/0.12 29.0 360.8 0. 26 19/0.10 141. 197.1 0.8 24 19/0.12 9.6 133.1 1.3 22 19/0.1 60.0 83.6 2.2 20 19/0.20 33.2 46.2 3.7 18 19/0.2 21.1 29.4.8 16 19/0.30 14. 20.2 7.7 14 37/0.2 10.9 1.2 11.4 12 37/0.30 7.6 10.6 1.6 NB: Current ratings quoted assume single isolated cable in FREE AIR, ambient air temperature of 10 0 C and conductor operating temperature of 120 0 C. For ambient air temperatures other than 10 0 C, the following rating factors should be applied: Ambient air temp 0 C 60 6 70 7 80 8 90 9 100 Rating factor 2.0 1.91 1.83 1.73 1.63 1.3 1.41 1.29 1.1 Where cables are to be grouped, the following rating factors apply: No. of cables grouped and touching 2 3 4 10 1 20 2 Rating factor 0.80 0.70 0.6 0.60 0.4 0.40 0.36 0.33 :8

:9

PTFE Insulated Equipment Wire Single Core A P P L I C A T I O N For use in areas where thermal, electrical or environmental conditions are very demanding. Power Generation Avionics and general electronics PTFE is unaffected by oils, lubricants, hydraulic fluids or aircraft fuels. S P E C I F I C A T I O N S In accordance with BS3G210 Conductors: Silver plated copper conductors (Nickel plated also available*) Insulation: PTFE insulation Temp Rating: 190 0 C max. conductor operating temperature. Voltage Rating: Type 'A' 300V Type 'B' 600V Type 'C' 1000V * When using nickel plated conductors; suitable for use at 260 0 C max conductor operating temperature. :10

Anixter Size Cable Nominal Nominal Isulation Max Approx Part No. AWG Type Conductor Conductor Thickness O/D weight Area stranding mm 2 #/mm mm mm kg/km A9AC-A28-** 28 A 0.08 7/0.12 0.1 0.71 1.40 A9AC-A26-** 26 A 0.12 7/0.1 0.1 0.80 1.96 A9AC-A24-** 24 A 0.22 7/0.20 0.1 0.9 3.04 A9AC-A22-** 22 A 0.34 19/0.1 0.1 1.10 4.41 A9AC-A20-** 20 A 0.6 19/0.20 0.1 1.3 7.19 A9AC-B28-** 28 B 0.08 7/0.12 0.2 0.96 2.10 A9AC-B26-** 26 B 0.12 7/0.1 0.2 1.0 2.74 A9AC-B24-** 24 B 0.22 7/0.20 0.2 1.20 3.9 A9AC-B22-** 22 B 0.34 19/0.1 0.2 1.3.44 A9AC-B20-** 20 B 0.6 19/0.20 0.2 1.6 8.43 A9AC-C28-** 28 C 0.08 7/0.12 0.4 1.28 3.31 A9AC-C26-** 26 C 0.12 7/0.1 0.4 1.37 4.04 A9AC-C24-** 24 C 0.22 7/0.20 0.4 1.2.42 A9AC-C22-** 22 C 0.34 19/0.1 0.4 1.67 7.08 A9AC-C20-** 20 C 0.6 19/0.20 0.4 1.92 10.33 ** Please use the following suffix for required insulation colour. 01 White 02 Black 03 Red 0 Yellow 06 Blue 12 Pink Other colours available to order :11

PTFE EFGLAS Aircraft Cable 260 0 C, 600V A P P L I C A T I O N For use in areas where thermal, electrical or environmental conditions are very demanding. Avionics and general electronics Gas turbines Specialised Hi-Fi systems S P E C I F I C A T I O N S In accordance with BSG222. Can also be supplied to MIL-W-2279. Conductors: Nickel plated copper wire conductors. Constructed with a combination of PTFE tapes and a PTFE impregnated glass yarn braid for extra strength Temp Rating: 260 0 C max. conductor operating temperature. Voltage Rating: 600V Frequency max: 1600HZ :12

Anixter Size Nominal Nominal Max Max DC Part No. AWG Conductor Conductor O/D Conductor Area stranding resistance mm 2 #/mm mm ohm/km @20 0 C A9BF-0022-** 22 0.34 19/0.1 2.0 60 A9BF-0020-** 20 0.6 19/0.20 2.2 33.4 A9BF-0018-** 18 0.93 19/0.2 2. 21.2 A9BF-0016-** 16 1.34 19/0.30 2.7 14.7 A9BF-0014-** 14 1.82 37/0.2 3.1 10.9 A9BF-0012-** 12 2.89 37/0.31 3.8 6.73 A9BF-0010-** 10 4.6 37/0.40 4.7 4.13 A9BF-0008-** 8 8.41 7 x 17/0.3 6.2 2.4 A9BF-0006-** 6 12.8 7 x 26/0.3 7.3 1.7 A9BF-0004-** 4 20.7 7 x 42/0.3 9.1 0.97 ** Please use the following suffix for required insulation colour. 01 White 02 Black 03 Red 0 Yellow 06 Blue 12 Pink Other colours available to order :13

ETFE (TEFZEL) Equipment wire single core (Thin wall Type ) 13 0 C 20V A P P L I C A T I O N For use on internal wiring of equipment where exposed to high temperatures. S P E C I F I C A T I O N S Manufactured in accordance to DEF Stan 61-12 Part 29 Type. Conductors: Tinned copper wire conductors. Insulation: ETFE insulation Temp Rating: 13 0 C max. conductor operating temperature. Voltage Rating: 20V Other constructions available including screened and sheathed versions, with Tinned or Silver coated conductors. :14

Anixter Size Cable Nominal Nominal Isulation Max Max DC Part No. AWG Type Conductor Conductor Thickness O/D conductor Area stranding resistance mm 2 #/mm mm mm @ 20 0 C ohms/km A9BE-0026-** 26 0.1 19/0.10 0.17 0.89 139 A9BE-0024-** 24 0.21 19/0.12 0.17 0.99 94.8 A9BE-0022-** 22 0.34 19/0.1 0.17 1.14 61.3 A9BE-0020-** 20 0.60 19/0.20 0.17 1.39 33.6 A9BE-0018-** 18 0.93 19/0.2 0.18 1.70 21.2 A9BE-0016-** 16 1.34 19/0.30 0.18 1.9 14.6 ** Please use the following suffix for required insulation colour. 01 White 02 Black 03 Red 06 Blue 12 Pink Other colours available to order :1

Intemp 20 - Single Core, Multicore Cable 20 0 C, 600/1000V A P P L I C A T I O N For use in situations in plant and process control where power supplies to equipment are at risk from high temperatures. Steelworks and foundaries Glass and ceramic industries Boiler makers S P E C I F I C A T I O N S Conductors: Nickel plated copper conductors. Insulation: PTFE Primary insulation Glass/Mica tape Secondary insulation. Overall Glass braid with heat and abrasion resistant finish. Single core colour natural. Multicore: individual cores can be colour coded on request. Temp Rating: 20 0 C max. conductor operating temperature. Voltage Rating: 600/1000V :16

Anixter Nominal Min bending Max DC Overall Current Part No. Conductor Conductor radius Conductor Diameter rating Area stranding resistance Nom @80 0 C mm 2 #/mm mm ohm/km mm Amps A9E-0010 1 32/0.20 38 20 3.8 2 A9E-001 1. 30/0.2 41 13.7 3.86 40 A9E-002 2. 0/0.2 4 8.21 4.26 4 A9E-0040 4 6/0.30 1.09 4.86 74 A9E-0060 6 84/0.30 8 3.39.6 98 A9E-0100 10 80/0.40 67 1.9 6.46 13 A9E-0160 16 126/0.40 87 1.24 8.7 180 A9E-020 2 196/0.40 10 0.79 10.1 240 Multicore cables manufactured upon request. Conductor sizes up to 10mm 2 manufactured upon request. NB. Current ratings quoted assume single isolated cable in FREE AIR, ambient air temperature of 80 0 C and conductor operating temperature of 20 0 C. For ambient air temperatures other than 80 0 C, the following rating factors should be applied: Ambient air temp 0 C 100 120 140 160 180 200 220 240 Rating factor 0.94 0.87 0.80 0.73 0.64 0.4 0.42 0.24 Where cables are to be grouped, the following rating factors apply: No of cables grouped and touching 2 3 4 10 1 20 2 Rating factor 0.80 0.70 0.6 0.60 0.4 0.40 0.36 0.33 :17

2771D Single Core Silicone Insulated Glass Braided Cable 180 0 C, 300/00V A P P L I C A T I O N Silicone cables are recommended for installations where for short periods of time, the temperature can fluctuate from high to low. This would cause standard cables to become inflexible and brittle. Steel mills Ceramic and glass factories High temperature applications S P E C I F I C A T I O N S In accordance with BS600 and BS6007. CENELEC code H0SJ-K single core. Conductors: Flexible Class tinned copper conductors to BS6360 Insulation: Silicone rubber insulation Type EI 2 to BS76. Treated glass fibre braid. Temp Rating: 180 0 C max. conductor operating temperature. Voltage Rating: 300/00V :18

Anixter Cenelec Nominal Nominal Isulation Max Approx Part No. Code Conductor Conductor Thickness O/D weight Area stranding mm 2 #/mm mm mm kg/km A9-B03-100-** H0SJ-K1 0. 16/0.2 0.6 3.4 10 A9-B03-107-** H0SJ-K1 0.7 24/0.2 0.6 3.6 13 A9-B03-1100-** H0SJ-K1 1 32/0.2 0.6 3.8 16 A9-B03-110-** H0SJ-K1 1. 30/0.2 0.7 4.3 23 A9-B03-120-** H0SJ-K1 2. 0/0.2 0.8 3 A9-H01-1040-** H0SJ-K1 4 6/0.3 0.8.6 4 A9-H01-1060-** H0SJ-K1 6 84/0.3 0.8 6.2 79 A9-H01-1100-** H0SJ-K1 10 80/0.4 1.0 8.2 126 A9-H01-1160-** H0SJ-K1 16 126/0.4 1.0 9.6 188 ** Please use the following suffix for required colour. 01 White 02 Black 06 Blue 07 Brown 60 Green/Yellow For current ratings refer to Section 2, Flexible Cables & Cords page 2:48 :19

SIF Silicone Insulated Heat Resistant Single Core Cable 180 0 C, 300/00V A P P L I C A T I O N Silicone cables are recommended for installations where for short periods of time the temperature can fluctuate from high to low. This would cause standard type cables to become inflexible and brittle. Steel mills Consumer white goods Ceramic and glass factories High temperature applications S P E C I F I C A T I O N S In accordance with VDE 020. Conductors: Tinned copper conductors. Insulation: Silicone rubber insulation Temp Range: -60 0 C to +180 0 C max. conductor operating temperature. Voltage Rating: 300/00V :20

Anixter Nominal Overall Approx Part No. Conductor Conductor Diameter weight Area stranding Nom mm 2 #/mm mm kg/km B2AH-000-** 0. 16/0.20 2.1 4.8 B2AH-007-** 0.7 24/0.20 2.4 7.2 B2AH-0001-** 1 32/0.20 2. 9.6 B2AH-010-** 1. 30/0.2 2.8 14.4 B2AH-020-** 2. 0/0.2 3.4 24 B2AH-0400-** 4 6/0.30 4.2 38 B2AH-0600-** 6 84/0.30.2 8 B2AH-1000-** 10 80/0.40 7 96 B2AH-1600-** 16 126/0.40 8.4 14 B2AH-200-** 2 196/0.40 10.3 240 ** Please use the following suffix for required insulation colour. 01 White 02 Black 03 Red 0 Yellow 06 Blue 07 Brown 12 Pink Other colours available to order Cables with solid conductors (Type SID) are also available. Details upon request. For current ratings refer to Section 2, Flexible Cables & Cords page 2:48. :21

SIHSI & SIHSIGL Silicone Heat Resistant Multicore Cable 180 0 C, 300/00V A P P L I C A T I O N Silicone cables are recommended for installations where for short periods of time the temperature can fluctuate from high to low. This would cause standard type cables to become inflexible and brittle. Steel mills Consumer white goods Ceramic and glass factories High temperature applications S P E C I F I C A T I O N S In accordance with VDE 020. Conductors: Tinned copper conductors. Insulation: Silicone rubber insulation Core Identification: 2 core - blue, brown 3 core - green/yellow, blue, brown 4 core - green/yellow, black, blue, brown Red overall Silicone rubber jacket. Additional glass fibre braid and lacquer (SIHSIGL types only). Temp Range: -60 0 C to +180 0 C max. conductor operating temperature. Voltage Rating: 300/00V :22

Anixter Number Nominal Overall Approx Part No. Conductor of Conductor Diameter weight Area cores stranding Nom mm 2 #/mm mm kg/km SIHSI 300/00V Types: A9-B04-207 0.7 2 24/0.20 6. 4 A9-B04-307 0.7 3 24/0.20 6.9 64 A9-B04-407 0.7 4 24/0.20 8.0 84 A9-B04-2100 1.0 2 32/0.20 6.7 60 A9-B04-3100 1.0 3 32/0.20 7. 78 A9-B04-4100 1.0 4 32/0.20 8.1 9 A9-B04-210 1. 2 30/0.2 7.6 82 A9-B04-310 1. 3 30/0.2 8.1 99 A9-B04-410 1. 4 30/0.2 8.9 123 A9-B04-220 2. 2 0/0.2 9.4 13 A9-B04-320 2. 3 0/0.2 9.9 13 A9-B04-420 2. 4 0/0.2 10.7 189 A9-B04-2400 4.0 2 6/0.30 10.8 182 A9-B04-3400 4.0 3 6/0.30 11.4 224 A9-B04-4400 4.0 4 6/0.30 13.2 29 SIHSIGL 300/00V Types A9-B03-207-01 0.7 2 24/0.20 6.9 63 A9-B03-307-01 0.7 3 24/0.20 7.3 74 A9-B03-407-01 0.7 4 24/0.20 8.4 9 A9-B03-2100-01 1.0 2 32/0.20 7.1 70 A9-B03-3100-01 1.0 3 32/0.20 7.9 89 A9-B03-4100-01 1.0 4 32/0.20 8. 106 A9-B03-210-01 1. 2 30/0.2 8.0 93 A9-B03-310-01 1. 3 30/0.2 8. 111 A9-B03-410-01 1. 4 30/0.2 9.3 13 A9-B03-220-01 2. 2 0/0.2 9.8 148 A9-B03-320-01 2. 3 0/0.2 10.3 169 A9-B03-420-01 2. 4 0/0.2 11.1 204 A9-B03-2400-01 4.0 2 6/0.30 11.2 197 A9-B03-3400-01 4.0 3 6/0.30 11.8 240 A9-B03-4400-01 4.0 4 6/0.30 13.6 313 Also available with larger conductor counts. Large conductor sizes available. For current ratings refer to Section 2, Flexible Cables & Cords page 2:48. :23

:24